Related
首先声明 本文是转载 作者是台湾的jojo0821大哥！！！
步驟如下：
1. 下載 SAMSUNGregistry 軟件並部屬它(手機須先解鎖)~~~ View attachment SamsungRegistry.xap
2. 從手機中啟動該軟體 上面區塊打 "HKLM\System\Platform\DeviceTargetingInfo\MobileOperator"，引號部分不要
3. 打完之後按一下 READ，應該會是 "GetString : ATT-US"
4. 把第二欄的所有信息清除，按下 WRITE
5. 再按一次 READ，應該會出現 "GetString :" 表示清除成功
6. 手機連上電腦，打開 Zune 檢查更新
7. 可以升到 7008 了
現在我們的 AT&T 版變成 Rogers 版本了，而 Rogers 版本的 NoDo 是已經準備派送了
Translated
This article is a reprint of the first statement is Taiwan's jojo0821 brother! ! !
As follows:
1. Download SAMSUNGregistry software and subordinates it (the phone must first unlock) SamsungRegistry.xap
2. from the phone to start the software above the block to play "HKLM \ System \ Platform \ DeviceTargetingInfo \ MobileOp erator", quotes some do not
3. Once on shore, then click READ, should be "GetString: ATT-US"
4. the second column removed all of the information, press the WRITE
5. Press READ, should appear "GetString:" Clear said the success
6. handset connected to the computer, open the Zune check for updates
7. can rise to 7008 by
Now we are into Rogers AT & T edition version, while the Rogers version of the NoDo is ready to dispatch the
Nice! My Dev phone (which is not an unbranded, carrier unlocked phone) is updating to pre-NoDo right now. It is very sad that I have to hack my phone just to get legit updates from Microsoft, and that I"m held captive by carriers.
Also, just to clarify the translation:
1. Download SamsungRegistry.xap software and install it (the phone must be a Developer Unlocked phone, or with the ChevronWP7 Unlock tool)
2. Launch SamsungRegistry and type in "HKLM\System\Platform\DeviceTargetingInfo\MobileOperator" without the quotation marks.
3. Click READ, and the returned value should be "GetString: ATT-US"
4. Tap in the Value field and delete the contents, then press Write
5. Press READ again, should appear "GetString:". No value = success
6. Connect your device to the Zune software and it should detect the Feburary 2011 Update needs to be applied, which will only be version 7008.
MS should be rolling out NoDo to US unbranded phones soon, I hope!
This is already posted in the unbranding thread. Thanks nonetheless.
http://forum.xda-developers.com/showthread.php?t=1004487
Please note that this update can be tricky. My Samsung locked up on me 5 times last night before the update would take. Personally, I wouldn't recommend doing this unless you are really really ansy about the new update. Plus, the PreNoDo is not that amazing. It is snappier and faster, but it doesn't seem like I should have gone through the hell I did. I'm not saying it always happens, or even happens 1% of the time (I could be an anomolous user), but after a plethora of errors I would just be patient...
Ah, thanks for the link. I haven't had any issues since removing the carrier branding, and installing the pre-NoDo update.
I'M A CHINESE.I hope my experience can help all WP7 fans. If this thread help you,It's my pleasure.
detail steps：
1. MAKE sure your phone has a 7004 or 7008 rom，than used chevronWP7.cer and chevronWP7.EXE to unlock your WP7. (this is step you can find in this forum)
2. After UNLOCK! prevent relocked. (belows is the easy way to edit your registry)
for HTC download xap in http://dl.dbank.com/c0u5q3xic8 and sideload it to your phone and run it ,press the green button.
for Samsung devices,see post #17 in this thread.
3. Update to NoDo via zune and your device still in unlocked state! (for some people cannot get nodo from zune, see below method,100% successful rate.)
methods to get zune nodo. http://forum.xda-developers.com/showthread.php?t=1012189 !!!!
Download USAIP.pbk open it and connect to EUROIP PPTP Hungary with
USERNAME: demo
PASSWORD: demo
Connect your phone to the PC
Disable WIFI in your phone but be sure not to open FLIGHT MODE
OPEN "Use cellular data connection to check for updates" in SETTINGS-UPDATE, AND KEEP YOUR PHONE IN THIS SCREEN
Start Zune and keep it running all the time
Manually search for an update within Zune (setting-phone-update)
After a few seconds (about 20-25 seconds for me) disable "Use cellular data connection to check for updates on your phone" --> WAIT FOR 20-30S,The update shows up! and enjoy it!
I MANAGED TO GET UPDATE BY USING THIS METHOD!!!
HAVE fune!
the update should go via zune. it should be official update。
If it works that's good news.. But is it that easy? I would thing that the update edits the registry...
If you update to 7008 the unlock still works that I know.. Are you sure that's not what happaned.. And you just got the Pre-NoDo update...?
BellPego said:
If it works that's good news.. But is it that easy? I would thing that the update edits the registry...
If you update to 7008 the unlock still works that I know.. Are you sure that's not what happaned.. And you just got the Pre-NoDo update...?
Click to expand...
Click to collapse
the vision is 7390.after 7008，unlock，then prevent unlock， then connect to zune， if you can find update， then you success。many chinese succeed，the only problem is MS，it promise everyone can update，but only very few people receive the notice of update through zune。
March thanks for XDA-DEVELOPERS(xboxmod)!
But I am still waiting the Nodo Version in Hong Kong, if it is true, it is a great job for the user!!!
I am a user of HD2 with wp7 two days ago.but now I have to switch to Android again as the wp7 is not fully developed,I think.anyway...thanks for sharing the good news...謝謝!
It seems to work based on user replies. However, it requires HTC-ProvXml-Deploy to work. What about us non-htc users?
as it was already said, we need to know if it works on non HTC devices?
Can anyone post the xap here?
Registered and downloaded the xap. It's attached as a zip, just change the file extension from .zip to .xap.
Wondering if this will truly be our way to update to NoDo and still keep our devices unlocked...
eternalemb said:
Registered and downloaded the xap. It's attached as a zip, just change the file extension from .zip to .xap.
Wondering if this will truly be our way to update to NoDo and still keep our devices unlocked...
Click to expand...
Click to collapse
thanks! I still cannot update to NoDo from Zune. Though my phone is unbranded
Is it the same with this?
[HTC] Prevent WP7 from Relocking
http://forum.xda-developers.com/showthread.php?t=913748
thats great, im sure this will be very helpfull to get a real JB goin...
too bad ive already updated :/
lemme quote the first post of the site translated (powered by microsoft translator):
http://www.qdppc.com/thread-48290-1-1.html said:
"Frog brothers produced"
---Prevent once and for all small patches of the lock (Prevent Relock:1B)
Simple, perfect, effectively address the WP7 lock problem again!
From then on no longer careful, make you lechery tour ZUNE!
Note: HTC models suitable for
Frog (Wagool) by XDA-DEVELOPERS (xboxmod) information produced by XAP patch (formerly:http://www.qdppc.com/thread-48230-1-1.html), an effective solution to mobile phone unlocking (prison break) is locked again after question!
"Steps"
1, verify that the phone has "escaped";
2, Prevent Relock.xap deployment installation attachment to mobile phone,immediately disconnect the ZUNE connection;
3, mobile Executive HTC-ProvXml-Deploy program, pressGreen(OK) button;
4, after you restart the phone, remove HTC-ProvXml-Deploy, well, everything OK!
"Description"
If the reset system (hard restart, restore factory, brushing machines), you need to "escape" and install this patch!
Reprint please specify the source
March thanks for XDA-DEVELOPERS(xboxmod)!
----------------
1, immediately disconnect the purpose is to prevent before continuing to the next step, have also been locked (in fact, in "flight mode" or under)
2,Deploy delete it or not as you, in fact, at this point the useless
PS: I'm not "boring", is a frog, HA HA ~ ~
Wagool
Click to expand...
Click to collapse
I received this morning notice of NoDO update... but I can wait a few days before to do...
harmoniic said:
Is it the same with this?
[HTC] Prevent WP7 from Relocking
http://forum.xda-developers.com/showthread.php?t=913748
Click to expand...
Click to collapse
+1
Any one plz answer this.
info5i2002 said:
It seems to work based on user replies. However, it requires HTC-ProvXml-Deploy to work. What about us non-htc users?
Click to expand...
Click to collapse
The whole prevent-relock thing essentially does this:
Code:
[HKEY_LOCAL_MACHINE\Software\Microsoft\DeviceReg]
"PortalUrlProd"=""
"PortalUrlInt"=""
On Samsung devices you can use the TouchXplorer Registry Editor to do this. Though it has limited access on Samsung devices. It will show an "Access Denied" when you open the DeviceReg registry-key. But it will still allow you to create new values there and overwrite the old values. So, open the DeviceReg-key and create the "portalUrlProd" and "PortalUrlInt" values as empty strings. That will prevent your Samsung from relocking. And as it seems, that tweak will even survive the NoDo-update.
is that only for htc device?
Heathcliff74 said:
The whole prevent-relock thing essentially does this:
Code:
[HKEY_LOCAL_MACHINE\Software\Microsoft\DeviceReg]
"PortalUrlProd"=""
"PortalUrlInt"=""
On Samsung devices you can use the TouchXplorer Registry Editor to do this. Though it has limited access on Samsung devices. It will show an "Access Denied" when you open the DeviceReg registry-key. But it will still allow you to create new values there and overwrite the old values. So, open the DeviceReg-key and create the "portalUrlProd" and "PortalUrlInt" values as empty strings. That will prevent your Samsung from relocking. And as it seems, that tweak will even survive the NoDo-update.
Click to expand...
Click to collapse
The xap samsung tools does the job automatically which is easier to use
Marvin_S said:
The xap samsung tools does the job automatically which is easier to use
Click to expand...
Click to collapse
So someone has tried to change these keys and update to nodo to see!!!!
Disclaimer, use this at your own risk, if this voids your warranty I’m not being held responsible, blah blah all that junk.
Well, first, thanks go out for Microsoft for releasing a support tool for Windows Phone yesterday. Inside that tool, were unreal hidden gems.
Basically they’ve created a managed wrapper over the whole update process for us, rather nice of them.
So I flashed my HTC Mozart back to RTM (7004) via a ROM update HTC ship and whipped up a little application to flash pre-NoDo (7008), NoDo (7355), NoDo update 1 (7389) & NoDo update 2 (7390) all in a single process. No I don’t care which carrier you are on, which phone you have, it’ll just update your phone accordingly.
We really have to commend Microsoft here for being able to split up the OS updates into differential packs, which saves users downloading 200+ MB updates, unlike the IFruit updates.
All you need to do is run the ChevronWP7.Updater.exe console app and follow the prompts.
Make sure you select the RIGHT language for your device. To double check what your default language is, go to Settings > Keyboard and if your selected language is displayed in the Console app, you’re good to select it. If it isn’t in the list, DON’T flash it just yet.
Now, download the following files.
x86 Operating System (32 bit)
Windows Phone Support Tools
http://download.microsoft.com/download/1/5/4/15427EAF-AD42-4E4A-8179-9A3C5483E366/WPSupportTool-x86.msi
ChevronWP7.Updater
http://www.megaupload.com/?d=G1OEGML1
x64 Operating System (64 bit)
Windows Phone Support Tools
http://download.microsoft.com/downl...E4A-8179-9A3C5483E366/WPSupportTool-amd64.msi
ChevronWP7.Updater
http://www.megaupload.com/?d=40MA6F02
Once you’ve installed the support tools and extracted the ChevronWP7.Updater.zip to the desktop, plug your phone in and wait 30 seconds.
Now start ChevronWP7.Updater.exe (this should kill Zune) and follow the prompts.
If you’re updating from Version 7004, you need to run the Updater TWICE, this needs the preUpdate before we can flash NoDo.
Again, if your language isn’t in the Chevron updater, DON’T attempt to update your phone. Some of the applications won’t work otherwise.
This “might” work for HD2 owners, haven’t tried it out just yet. If it does, report below and tell me .
There is NO revert process, again, flash at your own risk.
I flashed my Samsung Omnia 7 works fine
Big Tenks to walshie
If I do so like you suggest with my HD2 (WP 7.0.7004.0), he still asks to update the february update..
And I did it twice like suggested...
Thanks anyway!
It doesn't work for me but I still have to install the February update. Does anyone know if there is already a new rom with this update included?
Thx!
Works for me, Samsung Focus AT+T and had to run it twice to get both updates.
Source
Where does this method pull the updates from? Is it the same update being tested by AT&T for the Focus?
Didn't work for me...tried 4 times and kept getting some error, then got booted from the program...not sure what the deal is. Samsung Focus, AT&T
Sent from my SGH-i917 using Board Express
Also not working for me- Samsung Focus on AT&T. Program runs, reboots phone, seems to update, but on examination I'm still at 7004.
Sadly I should've resisted. I did this on my AT&T Samsung Focus, everything is great except I have no marketplace and no Zune functionality..
LastOttoman said:
Disclaimer, use this at your own risk, if this voids your warranty I’m not being held responsible, blah blah all that junk.
Well, first, thanks go out for Microsoft for releasing a support tool for Windows Phone yesterday. Inside that tool, were unreal hidden gems.
Basically they’ve created a managed wrapper over the whole update process for us, rather nice of them.
So I flashed my HTC Mozart back to RTM (7004) via a ROM update HTC ship and whipped up a little application to flash pre-NoDo (7008), NoDo (7355), NoDo update 1 (7389) & NoDo update 2 (7390) all in a single process. No I don’t care which carrier you are on, which phone you have, it’ll just update your phone accordingly.
We really have to commend Microsoft here for being able to split up the OS updates into differential packs, which saves users downloading 200+ MB updates, unlike the IFruit updates.
All you need to do is run the ChevronWP7.Updater.exe console app and follow the prompts.
Make sure you select the RIGHT language for your device. To double check what your default language is, go to Settings > Keyboard and if your selected language is displayed in the Console app, you’re good to select it. If it isn’t in the list, DON’T flash it just yet.
Now, download the following files.
x86 Operating System (32 bit)
Windows Phone Support Tools
http://download.microsoft.com/downl...-4E4A-8179-9A3C5483E366/WPSupportTool-x86.msi
ChevronWP7.Updater
http://blog.walshie.me/Share/ChevronWP7.Updater.x86.zip
x64 Operating System (64 bit)
Windows Phone Support Tools
http://download.microsoft.com/downl...E4A-8179-9A3C5483E366/WPSupportTool-amd64.msi
ChevronWP7.Updater
http://blog.walshie.me/Share/ChevronWP7.Updater.x64.zip
Once you’ve installed the support tools and extracted the ChevronWP7.Updater.zip to the desktop, plug your phone in and wait 30 seconds.
Now start ChevronWP7.Updater.exe (this should kill Zune) and follow the prompts.
If you’re updating from Version 7004, you need to run the Updater TWICE, this needs the preUpdate before we can flash NoDo.
Again, if your language isn’t in the Chevron updater, DON’T attempt to update your phone. Some of the applications won’t work otherwise.
This “might” work for HD2 owners, haven’t tried it out just yet. If it does, report below and tell me .
There is NO revert process, again, flash at your own risk.
I flashed my Samsung Omnia 7 works fine
Big Tenks to walshie
Click to expand...
Click to collapse
In the future, just link directly to my Blog, direct linking to the installers doesn't enable me to update them if there is an issue.
so i shouldn't be doing this if i have Samsung Focus on AT&T?
mastamind518 said:
so i shouldn't be doing this if i have Samsung Focus on AT&T?
Click to expand...
Click to collapse
If you follow the post, there are detailed instructions for Samsung Focus users.
walshieau said:
If you follow the post, there are detailed instructions for Samsung Focus users.
Click to expand...
Click to collapse
thanks it worked. shows 7390.
Focus
Worked for me too on my ATT branded, locked Samsung Focus. Now running 7390.
Have an AT&T Focus, carrier unlocked, Chevron'ed and I can't seem to update. I have tried using the "Windows Support Tool" and still no luck. See log below if it looks right
UpdateWP version 4.7.1404
Applying updates to device
Id: \\?\usb#vid_045e&pid_0710#b7d536af-3362-ca4a-6b09-6f8888553bf1#{ca3d7387-f67b-11da-bbec-8000600fe800}
SN: af36d5b7 - 62334aca - 6b096f88 - 88553bf1
Name: SGH-i917
KITLName: QSD8XXX19417BBB
Manufacturer: SAMSUNG
ModelId: 1
MobileOperator:
Version: 07.00.07004.00-00000
Checking your phone's status.
Checking your phone's status: Completed in 0.01 seconds
Checking system requirements.
Checking system requirements: Completed in 0 seconds
Downloading updates.
Downloading updates: 0%
Downloading updates: Completed in 3.07 seconds
Checking system requirements.
Checking system requirements: Completed in 0 seconds
Installing updates. Please wait: 100%
Installing updates. Please wait: Completed in 5.57 seconds
Rebooting your phone..
Rebooting your phone: Completed in 42.3 seconds
Completing updates..
Completing updates: Completed in 1.28 seconds
The device has been updated to version 07.00.07004.03-00.00.00000.00-00.00.00000.00
When i look at the "About" status it still shows 7.00.07004.0
Any ideas?
Hi, HTC Surround
I am updating and it goes to downloading update but fails to go any further. just closes chevron
Any Ideas
Updated fine, but after the update anything related with messaging (SMS's, E-mail some contacts) doesn't work. Orange HTC Mozart running branded 7008...
Chevronwp7update was removed from the site. Where else can it be downloaded from?
Same here HTC Mozart telstra
Sent from my T8697 using XDA Windows Phone 7 App
Updater seems to be offline?
Anyone has got updated Links or a mirror?
Thanks in advance
Ok, I installed the Debrander xap util and it debranded to 00-88. I then ran Zune and it showed update available. It upgrade phone to 7008 from 7004. But even after that running chevron update still fails.
Maybe it was pulled from the site due to unforeseen problems.
Btw, don't reinstall debrander over your original debrander as it loses the original carrier details no I cannot rebrand to at&t unless I do a reg hack *I think*
@ Mods: I read the tutorials here on how to unlock Windows Phone 7 but most of the time I felt like there's missing some information. I know that there are already a lot of tutorials and guides but I thought it would be good to collect it a bit. If this thread is inappropriate feel free to remove it
-
Unlock your phone
[Developer unlock; ChevronWP7; Application Deployment]
1. Check the OS version of your phone
First step is to check which OS version your phone is running as ChevronWP7 doesn't work with NoDo (or higher) update installed on your phone. Just take a look at the following page on your phone: settings > about > more information.
7.0.7004 = compatible with ChevronWP7 | No updates installed; OS version when Windows Phone 7 was launched
7.0.7008 = compatible with ChevronWP7 | Pre-NoDo update installed
7.0.7390 = not compatible with ChevronWP7 | NoDo update installed
7.0.7392 = not compatible with ChevronWP7 | NoDo update installed; certificate update for security improvement installed
7.0.7401 = not compatible with ChevronWP7 | Pre-Mango update (BETA! NOT OFFICIALLY AVAILABLE YET!) installed
7.0.7661 = not compatible with ChevronWP7 | Mango update (BETA v1! NOT OFFICIALLY AVAILABLE YET!) installed
7.10.7712 = not compatible with ChevronWP7 | Mango update (BETA v2! NOT OFFICIALLY AVAILABLE YET!) installed
7.10.7720 = not compatible with ChevronWP7 | Mango update (FINAL - FOR DEVELOPERS ONLY! NOT OFFICIALLY AVAILABLE YET!) installed
If your phone is running an imcompatible version you've to flash a ROM which hasn't got NoDo installed. Take a look at xda-developers | Forums and scroll down to your device. Enter the development section and search for a flash guide and a machting ROM file. I can't explain the process more exactly as it depends on your phone model.
2. Install Zune software
If you don't already have the Zune software on your computer, follow this link and install it: zune.net
3. Add registry entry
Now you have to add a entry to your Windows registry. ChevronWP7 will need this entry to connect to your phone. There are several methods - use only one!
Method 1:
Install Windows Phone Developer Tools RTW. The entry will automatically be added.
The setup is enourmously big but later you'll need it anyway! So I really advise you to choose this method!
Method 2:
Download this .reg-file to your hard drive and execute it. Click "Yes" in the first popup and "OK" in the second one - the entry is now added.
Method 3:
Add the entry manual: Open up the registry editor (Command: regedit.exe | Default path: "C:\Windows\regedit.exe"). Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsPhone\ProxyPorts. If the folder/key doesn't exist yet, create it. Search for the entry DeviceReg. Create it if it doesn't exist: It's a 32-bit DWORD called "DeviceReg" with this data in it:
Hexadecimal: 69c5
Decimal: 27077
4. Check "hosts" file for "developerservices.windowsphone.com" entries
Now it's best to also edit the "hosts" file. Here's what you've to do:
Open up "Notepad" (Start - All Programs - Accessories - Notepad) - It's best to right click it and press "Run as administrator" in the menu. Else it could happen that you don't have the permission to edit the file. Then click on File > Open. Now copy this line:
%windir%\system32\drivers\etc\hosts
and paste it in the line file name. Then just hit the enter key.
Now search for lines which contain developerservices.windowsphone.com. If you find such lines just remove them entirely. Finally press File > Save.
5. Install certificate on phone
Next step is to install the certificate from ChevronWP7 on your phone. The easiest way is to open up the browser on your device and type this URL into the adress bar:
db.tt/fFwKQIy
Consider the use of capitals and small initials letter!
(You don't have to install this on your computer)
After you opened the page you can see a big shield. Under the symbol there's a message saying "Press to open the file ChevronWP7.cer". Follow this instruction and confirm with install and ok.
6. Download and run ChevronWP7
To get the unlock tool follow this link and save the ChevronWP7.exe file somewhere on your hard disk. Now do the following steps:
- Connect your phone to the computer
- Wait for Zune to start up (If it doesn't start up, open it manually)
- In Zune click on the tab phone
- There you have to pay attention to two things:
- If Zune is syncing files to or from your phone just wait until it's finished
- Now check the relationship between Zune and your phone. If you can read something about a guest relationship you've to click on "Change Sync Relationship" and follow the instructions to get a full relationship.
- Keep sure that the device stays on the homescreen (where the live tiles are) for the next steps - the lockscreen mustn't be active! [Just touch the display and scroll up and down every few seconds to avoid this.]
- Run the downloaded ChevronWP7.exe and check the two boxes:
Ensure your phone isn't PIN-locked
Install certificate on phone using Internet Explorer at "http://www.chevronwp7.com/cert"
- Now finally click on the Unlock button - The button turns into Relock which means that your device is unlocked now. If this didn't work for you - with an error message coming up on your screen - try this:
Instead of using the latest version of Zune, try an older version. Here's a link where you can download version 4.7.01: Zune v4.701
Don't click the Relock button now! Just close ChevronWP7.
Leave Zune running in the background as we'll need it again in a few minutes.
Don't disconnect your device now! Continue with step 7 or your device will relock itself the next time you connect it and Zune identifies it.
7. Keep your phone unlocked
7.1 Install registry editor
As you can read above your device will be locked if you connect it again (Zune will identify your phone and lock it again). To prevent this we've to edit an entry of the phone registry:
First of all we need a registry editor for Windows Phone 7. Well, there's not a uniform way to edit registry on all devices (HTC, Samsung, ...), yet. So you have to search a registry editor which enables full registry access on your device. [I'll update this with some suggestions soon!] Then you've to open Start > All Programs > Windows Phone Developer Tools > Application Deployment on your computer. Select the downloaded .xap file (Registry Editor) and click on Deploy. Wait until the process is finished. Now disconnect your phone from the computer.
7.2 Modify the registry
Now open the Registry Editor on your phone. Now navigate to HKEY_LOCAL_MACHINE > Software > Microsoft > DeviceReg.
Now scroll to PortalUrlInt, remove its value data and save it. Do the same with PortalUrlProd. Both entries should now be "empty" (but not deleted!).
8. Installing updates
8.1 Pre-NoDo & NoDo update:
After you've followed the steps of my tutorial, you can install both the Pre-NoDo and the NoDo update without loosing the unlock.
8.2 Mango update:
There's already a BETA version of Mango out there which is intended for developers - but with some additional steps you can also install it without being a developer (and even without having a developer unlocked phone)! This update WILL REMOVE YOUR UNLOCK AND DISABLE THE USE OF HOMEBREW APPS! -> You won't be able to sideload apps anymore and you won't be able to use tools like registry editors and file explorers! Basically, if you want Mango update + jailbreak you've to prepare your phone while running NoDo (or earlier). To explain the process shortly: There are official apps which read out files information and apply changes to the phones registry. Just imagine a connection managing application which has got one file for every single provider containing informations like APN, Passwords, ... . Okay, so while you're on NoDo you can add your own files to this application - but these ones won't contain information about a provider. Instead they'll tell your phone to change several registry entries. And example would be the "Connection setup" app for HTC devices. People can add a .provxml file to the app. Then they update to Mango with loosing the developer unlock but not the file. On Mango they open up the "Connection setup" (<- You have to use this official tool - sideloaded apps won't work at that time as you're not developer unlocked yet) and can see the entry of the .provxml: There will be several networks to choose from (e.g. "T-Mobile", "Vodafone", ...) and also a entry called something like "Developer unlock". Well, this is because of the .provxml file. Then you just have to choose and run this file and the changes will apply - your phone is unlocked again! Just search and you'll find much tutorials here on how to use provxml method on HTC, Samsung, ... devices. I unlocked my Omnia 7 running Mango BETA v2 using this method.
-
Wow, you're done! Now you can connect your device to your computer without loosing the unlock.
I'll try to always improve this tutorial and keep it up to date
Please click on "Thanks" if it helped you!
Please tell me if you find something disordered or mistakes. And please be kind as this is my first tutorial Thanks
Excellent. I think this combines everything that was missing from other tutorials, and it is very thorough.
I'm inspired to flash my Focus and unlock it (my old one bricked).
You should add some recommended apps for post-unlock. AccentChanger, Battery Meter, Ringtone installers, Screen Capture, etc.
Thanks And my english doesn't sound too crappy?
Much luck with your Focus
WP7 root tools can used only on Samsung devices (you forgot to tell this)... better to advice different editor if you want have compete tutorial
also cert file must be sended via email to phone or upload to web and download to phone... link which you provided is old and dead....
dxdy said:
WP7 root tools can used only on Samsung devices (you forgot to tell this)... better to advice different editor if you want have compete tutorial
Click to expand...
Click to collapse
Oh thanks! I will correct it later today
dxdy said:
also cert file must be sended via email to phone or upload to web and download to phone... link which you provided is old and dead....
Click to expand...
Click to collapse
For me the link works. You have to write it correctly [it's case sensitive]. Please try again
for this link "http://www.chevronwp7.com/cert" hehehehe
hey,
if i unlock my omnia 7 with your method and before i update to NoDo. Can i update to nodo after unlock and my device is still unlock?
THX
knigge said:
hey,
if i unlock my omnia 7 with your method and before i update to NoDo. Can i update to nodo after unlock and my device is still unlock?
THX
Click to expand...
Click to collapse
yes you can update to NoDo and very possible device still be unlocked
http://forum.xda-developers.com/showthread.php?t=1101344
dxdy said:
WP7 root tools can used only on Samsung devices (you forgot to tell this)... better to advice different editor if you want have compete tutorial
Click to expand...
Click to collapse
I removed the suggestion of WP7 root tools - but there is still not a common way to modify registry which works on all devices I think I already created a thread in the Q&A section where I hope to get some help or advices
http://forum.xda-developers.com/showthread.php?p=15158977#post15158977
dxdy said:
also cert file must be sended via email to phone or upload to web and download to phone... link which you provided is old and dead....
Click to expand...
Click to collapse
Well, you can send it via email but you don't have to. I uploaded it and so the only thing to do is opening the link Well, at least I hope so. Can someone confirm that this link works if you pay attention to capitals and small initial letter? Thanks!
dxdy said:
for this link "http://www.chevronwp7.com/cert" hehehehe
Click to expand...
Click to collapse
Wow, the page has been down for a long time and now this comes up
Ok. So installed Nodo on my phone a whiile ago. Carrier stock att. Is there a way for me to downgrade and install the chevron? CUz I dont think i can downgrade.
We need to know what phone model you have (HTC HD7 for example)
i have the HTC 7 Pro with 7.0.7392 OS. i hate now to not unlock my foon!!!!!
Aren't there old ROM files for HTC 7 Pro out there?
what?/ can i install a old rom on my foon??
Did you even read my tutorial? It says that you should look into the development section of your phone here on xda-developers. There are ROMs so I think there's also a way to flash them
I bought on ebay a Omnia 7, how do i know if the person who sold me made de unlock with the ChevronWP7...is there any way to see on the phone if the ChevronWP7 is apllied.
Thanks for your great tutorial.
First of all you've to look if there's homebrew installed on the phone. Something like 'Registry editor' for example. If not I guess the easiest way is to try to deploy an app to the phone. If it works it's unlocked, if not it is locked. And if Zune tells you to update: Don't do it until you followed my tutorial
experience7 said:
First of all you've to look if there's homebrew installed on the phone. Something like 'Registry editor' for example. If not I guess the easiest way is to try to deploy an app to the phone. If it works it's unlocked, if not it is locked. And if Zune tells you to update: Don't do it until you followed my tutorial
Click to expand...
Click to collapse
I checked in my phone and i already have the 7.0.7392.0 version installed.
So now i have to downgrade to the 7.0.7004 version, install the ChevronWP7, and then i can update with zune to the last version that i still be unlocked, is that correct?
Thanks
Correct
the link to chevronwp7.exe does not work. can you have a look at it.
Hey Guys,
I have been a long time viewer of XDA and found it incredible useful for both Android and WP7 communities.
I have just updated my Samsung Omnia 7 to the 7720 (RTM) build of Mango after the official Zune 4.8 came out. This meant that it took lots of trial and error and basically mashing instructions from a few different tutorials to get the build running.
As I can't find much reference for people who are trying to do this post-4.8 i thought it would be helpful to post what worked for me. I will try my best to link to the original threads for the steps and downloads I used and I take zero credit for the hard work done by those who wrote these tools and scripts.
(MODS: As this is my first post I couldn't put this in the Dev/Hacking forum, if up to scratch and necessary could you move it there?)
So here we go:
You will need:
WP7 Handset running NoDo
MicroUSB Cable
Windows 7 or Vista PC
Patience
A couple of hours to spare
Please note that as per every other tutorial of this kind, you are doing this to your own phone... don't blame me if things go bad!
This method of updating will remove your Chevron Unlock - if your a homebrew fan then i would look for other tut's or wait for official update!
1: Download this "Mango for All 0.3" from here
2: Extract the folders in the zip file to C:/takeonetomango .
3: Download "7720.rar" from here (originally found in this thread)
4: Extract the contents of 7720.rar to C:/ (VERY IMPORTANT! - you should end up with C:/RCtoRTM, C:/Zune etc).
5: If you currently have Zune and the Windows Phone Support tool - UNINSTALL THEM.
6: Open C:/Zune and run "Startzunelocal.exe" to install the (now old) Zune 4.8 Beta.
7: Open C:/Zune/Update and install "UpdateWP.exe" from either the x86 or x64 folder depending on which windows you use. (This is something of an idiot test. If you don't know which you should choose - stop here. Put the down your phone, uninstall Zune and put the official zune back - you should wait for the official mango update as this can seriously damage your phone.)
Explanation: So far, all the tools used to provision the phone and force the updates rely on the version of Zune and the WP Support Tool to match. Since the Zune 4.8 was officially released, there isn't a matching Support tool, which will cause all these bat files to fail their checks. This is why we will be rolling back to the old 4.8 beta a couple of times, just to please those checks.
8: Now you should have Zune Beta and the supplied UpdateWP installed. Now navigate to C:/takesonetomango. Plug in your phone and quit zune (you may need to wait a few minutes for the windows device driver to install). DO NOT UPDATE ZUNE AT THIS POINT. QUIT ZUNE.
9: With your phone plugged in and zune no longer running, right click "Update.bat" and run as Administrator
10: Follow the steps that appear in the command prompt. This will now do a backup of your phone and move it to a safe place (this is because you will need to go back to NoDo to get the official Mango update).
11: Go and put the kettle on. This is now going to take a while depending on how much stuff you have on your phone.
12:When the backup is done, it will move this backup to a safe place. Press any key to start that and finish drinking your coffee.
13: Once the backup is moved the command prompt will now do the interesting stuff. Its going to "Provision your phone" to trick Zune into thinking your a developer. Follow the instructions and be VERY PATIENT.
14: Once its all done, it will launch Zune. Stop any Sync'ing and go straight to check the phone for updates.
15: It should now say an Update is available and welcome to the Mango ISV beta. Hit Update now. You must update to the latest Zune first - this is fine - go for it.
16: When zune has updated, plug the phone back in and check for updates again. Now it will install the Mango 7712 (beta 2) update. Your phone will restart a couple times, be patient and wait until it has done TWO updates to your phone. Another coffee would be good.
CONGRATULATIONS! You now have Mango on your phone. However its not the latest RTM that you have been hearing about. So lets go install that -
17: With your phone unplugged, uninstall Zune again. And make sure you uninstall the "Windows Phone Support Tool" if it shows up in the program removal list.
18: Now go back to C:/Zune and install that old version again.
19: Now install "UpdateWP.exe" from the correct folder in C:/Zune/Update
20: Plug in your phone. Wait for the device driver to install again.
21: If Zune launches, quit Zune.
22: Go to C:/RCtoRTM and run "ISVto7720.bat" as an Administrator
23: This will take quite a while. All those other files in there are actually the RTM update itself. This one doesn't come over Zune, we only went back to the old zune to satisfy the checks in ISVto7720.bat.
24: After you have drank a few more cups of coffee your phone will have rebooted and installed the RTM release.
At this point you will need to unplug your phone and start playing with it. My apps and files and all settings etc stayed in place so yours should too.
Whilst playing with the new features on there you will want to launch zune and get it to update itself to the official 4.8 again otherwise the phone won't sync with it.
It's important to keep the C:/takesonetomango folder as there is a handy file called "Restore.bat" which will use the backup created earlier to put NoDO back on your phone as Microsoft says you will not be able to get the official release unless NoDO is on your phone.
Hope you find this useful. If I have linked to something and not given credit to the original author please let me know and I will change the credit.
Enjoy
Tips:
1. If you have any problems with errors for "prov.cab" users have reported that sometimes rebooting can sort it, otherwise edit the update.bat file with the explicit path to prov.cab. Thanks to everyone in the thread who suggested this to help others!
Is Hidden WiFi feature enabled in this release?
The code is probably there but don't know how to enable it yet! There is a long discussion here:
http://forum.xda-developers.com/showthread.php?t=1233612
There is plenty of other reasons worth updating though!
Help!
Hi.
Trying to follow these directions. At step 9, am getting this error:
"File prov.cab is not accessible. Please double check your file."
Any idea what I might have done wrong? Do I need to uninstall everything and start over again?
Theycallme Tim said:
Hi.
Trying to follow these directions. At step 9, am getting this error:
"File prov.cab is not accessible. Please double check your file."
Any idea what I might have done wrong? Do I need to uninstall everything and start over again?
Click to expand...
Click to collapse
try running as admin.
Im actually stuck at step 16
Zune wants to restart the phone but nothing happens and the phone screen shows a picture that i should plug in the cable, but it is already
zune also consumes 30% of the cpu and that since an hour...
any ideas how to continue ?
/edit
just abort and retry
now running 7720
Was doing that, but that was a good suggestion.
z33dev33l said:
try running as admin.
Click to expand...
Click to collapse
try running not as admin, worked for me...
Just uninstalled everything and am going to start over from step 1.
No disrespect to all of you Mango lovers, but really wish the Pre 3 had made it to market right now. ... I'm sure I'll be more forgiving of some of the Mango shortcomings once I have successfully completed this process.
For what it's worth, i followed the instructions and am now successfully running 7720 RTM Mango.
The only stumbling block i had was going from 7712 to 7720, "ISVto7720.bat" was closing seconds after opening, a quick PC restart later however it worked first time, plain sailing aside from that.
Really enjoying all the new features thus far and i'm sure there's more i've yet to encounter - thanks for the clear and easy to follow instructions to help me get there.
Great to hear at least some success with these instructions!
It is a bit hit and miss, to be honest and each machine seems to have its own little subtle differences in the order that it installs device drivers etc.
If you get the problem with Prov.cab double check you have extracted the folder to the right place, the bat files have explicit paths in them (it doesn't just look for prov.cab in the same folder, it looks specifically for C:/RCtoRTM/prov.cab for example).
Jay
I'm going to try this later on tonight.
I have de-branded my HD7 a few weeks back using the two roms.
RUU_Schubert_O2_UK_1.57.728.02_Radio_5.52.09.16_22.33a.50.10U_Signed_by_ansar
RUU_Schubert_HTC_Europe_1.69.401.01_Radio_5.54.09.21_22.33b.50.10_Signed_SCHUBER*T_RELEASE
I assume this still will work?
dctrdre said:
For what it's worth, i followed the instructions and am now successfully running 7720 RTM Mango.
The only stumbling block i had was going from 7712 to 7720, "ISVto7720.bat" was closing seconds after opening, a quick PC restart later however it worked first time, plain sailing aside from that.
Really enjoying all the new features thus far and i'm sure there's more i've yet to encounter - thanks for the clear and easy to follow instructions to help me get there.
Click to expand...
Click to collapse
Same problem here with a few error messages, but finalli working on LG E900.
Thanks Jay
Just wanted to confirm that it has worked fine. Thanks Jay for putting the guide together.
Sent from my HD7 T9292 using XDA Windows Phone 7 App
Does anyone know if this procedure works for the Verizon Trophy (SparkW), and if not, is there any way to load Mango RTM without developer unlock?
General sanity check question: if one chose to update to Mango via this "unofficial" method, how can he be sure that his phone will be in a "supported" state afterwards? Or, to rephrase, what would be the purpose of updating now just to have to revert to the last backup in order to update officially once the update is released by the manufacturer?
AnnihilatorSC said:
General sanity check question: if one chose to update to Mango via this "unofficial" method, how can he be sure that his phone will be in a "supported" state afterwards? Or, to rephrase, what would be the purpose of updating now just to have to revert to the last backup in order to update officially once the update is released by the manufacturer?
Click to expand...
Click to collapse
As I know, the beta update in 7712 has all 22 Languages, while the RTM update posted here only has 6.
For those who just use one of those 5-6 default languages should have no problem, but the others who enabled other languages in 7661 or 7712 should have found the update is "unfinished" (I hope someone will notice), though the build is 7720.68 which is supposed to be real RTM.
If the update through Zune has all 22 languages available, it should be worth to update officially. As you know, there are always people who don't want to see the "Not for resale" logo in the boot screen while keeping the Mango features, me too.
When someone captures the RTM update files in all 22 languages before the update through Zune, then I will see no point to roll back the update and do once more officially.
henry084 said:
As I know, the beta update in 7712 has all 22 Languages, while the RTM update posted here only has 6.
For those who just use one of those 5-6 default languages should have no problem, but the others who enabled other languages in 7661 or 7712 should have found the update is "unfinished" (I hope someone will notice), though the build is 7720.68 which is supposed to be real RTM.
If the update through Zune has all 22 languages available, it should be worth to update officially. As you know, there are always people who don't want to see the "Not for resale" logo in the boot screen while keeping the Mango features, me too.
When someone captures the RTM update files in all 22 languages before the update through Zune, then I will see no point to roll back the update and do once more officially.
Click to expand...
Click to collapse
Actually, my Trophy only has 5 languages available. I remember that the update will not show all 22 languages, but it will support all of them. Selected languages will only be available on your phone based on the phones firmware region.
Just updated my hd7 and my wife's focus 1.3v to mango. This walkthrough is definitely great. For the focus i used senboston "ISVto7720" instead of the one in rctortm package. It is in the other THREAD post #508 mentioned in the first post here. With your indulgence, could you please enlighten me on how to use the restore.bat. Maybe another walkthrough for this is needed. Thanks again!.
downloaderintruder said:
Actually, my Trophy only has 5 languages available. I remember that the update will not show all 22 languages, but it will support all of them. Selected languages will only be available on your phone based on the phones firmware region.
Click to expand...
Click to collapse
It does support multi-languages shown up since 7004 (cannot said to be support), just not be able to type.
What I mean is the interface languages, which suppose to be a full support, instead of partial support as you have mentioned.
In beta update 7712, language packs will be updated according to your registry settings in NoDo, instead of the ROMs we have. I am just curious if 7720.68 through Zune will update in the same way.