Hey guys! I have recently installed the Synergy RC2 ROM and since the install have not been receiving most of the texts that have been sent to me. A few will come through but not all. I have tried updating the radios but not sure if I have there right ones or not. Any one have a solution to this problem?
thatboyb86 said:
Hey guys! I have recently installed the Synergy RC2 ROM and since the install have not been receiving most of the texts that have been sent to me. A few will come through but not all. I have tried updating the radios but not sure if I have there right ones or not. Any one have a solution to this problem?
Click to expand...
Click to collapse
Sprint was having some text issues the past couple days but I think they're largely resolved now. Calkulin has a thread in the development section where you can get the latest radio bundle, I'd link it but not at my computer currently. Also try updating your PRL and then Profile after you get the radio package flashed. Also make sure you're using Amon_Ra for recovery. Good luck.
Sent from my PC36100 using XDA App
Thanks for the info. I just flashed the latest radios from Caulkins thread right before you responded and also updated the profile and prl. Ill have to get some text convos going before I can say if it worked.
thatboyb86 said:
Thanks for the info. I just flashed the latest radios from Caulkins thread right before you responded. Ill have to get some text convos going before I can say if it worked. I tried updating my profile and prl but keep getting unable to update message
Click to expand...
Click to collapse
Try another reboot as well, then attempt to update the prl then profile. If you still get error then just try later.
Sent from my PC36100 using XDA App
Related
SteelH solved the proplem. Thanks!
http://forum.xda-developers.com/showpost.php?p=7878966&postcount=5
I installed Freshevo and Netarchy. Everything works great, however I miss the Sprint TV application.
So I tried to install the version from the SD card (fresh-removed-apks-3)
Installation worked, but when I start the app, I get a notification that a newer version would be available. There are two buttons available "exit" and "update", but only the exit button works. Which means I can not update. Unfortunately I can not skip the dialog either, so no Sprint TV for me :-(
Any idea how to fix this, or where to get the latest version?
PS
I don't know why it was removed, I don't really consider it bloatware Please re-add.
+1 on evio rom as well. I nandroided back to 2.1 stock rooted rom and the update went through. Anyone know where the updates are stored so i can pull it from there and post it.
Sent from my PC36100 using XDA App
I think if you just upload the whole apk that works well
Sent from my PC36100 using XDA App
To quote Flipz as to why Sprint updates for Sprint programs don't work:
" Due to fresh rom being signed you will get a signature error while trying to install it. Me resigning the whole rom allows me to do customizations and modifications that other roms can’t do, yet the side effects of people not being able to install all of these updates is getting to be a bit much. I might go back to an un-resigned rom until after things slow down with the evo." From his web site.
There is a flashable sprint tv update zipfile in my ROMs OP. It should work just fine with the EviO ROM.
This could be the reason, however we don't get a signature error. it looks like the update button is not working?
Jim M said:
To quote Flipz as to why Sprint updates for Sprint programs don't work:
" Due to fresh rom being signed you will get a signature error while trying to install it. Me resigning the whole rom allows me to do customizations and modifications that other roms can’t do, yet the side effects of people not being able to install all of these updates is getting to be a bit much. I might go back to an un-resigned rom until after things slow down with the evo." From his web site.
Click to expand...
Click to collapse
Sent from my PC36100 using XDA App
I think we have the while apk? It just isn't the latest version?
abaileyb said:
I think if you just upload the whole apk that works well
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Sent from my PC36100 using XDA App
How do you know you're not getting a signature error? Are you checking the log file?
Sent from my EVO using XDA App
~ Stay thirsty my friends ~ XX
This solved the problem. this is the latest version now, so no update problem at the moment.
Thanks!
PS
I like your ROM, too
SteelH said:
There is a flashable sprint tv update zipfile in my ROMs OP. It should work just fine with the EviO ROM.
Click to expand...
Click to collapse
Go to this link for the update apk file. I just downloaded it, installed and all working as normal again.
http://forum.xda-developers.com/showthread.php?t=766977&page=2
Ian B
Good point. I haven't (if you tell me how I will).
However there is one reason that makes it reasonable to me there was no signature error. The update notification shows two buttons. The users can choose to update or to exit. It doesn't update immediately. However the update button doesn't ("not active"), so it doesn't look like the update was downloaded at all. Does this make sense?
Jim M said:
How do you know you're not getting a signature error? Are you checking the log file?
Sent from my EVO using XDA App
~ Stay thirsty my friends ~ XX
Click to expand...
Click to collapse
This is almost the 4th time I have tried flashing this rom. Never gets past the Evo 4G white screen at all. I have tried 3 different ways.
Clockwork (2 different versions)
RA
Download through Rom Manager
I then tried flashing CM 6.1 just to see if it would work and it worked just fine. I am downloading the file from the Myn official thread. It's Rls 4. Seeing how big the thread is and all the people using it, I know it works for tons of people.
I do all the steps as in wipe all the data and everything.
Any ideas on what could be the problem?
barats said:
This is almost the 4th time I have tried flashing this rom. Never gets past the Evo 4G white screen at all. I have tried 3 different ways.
Clockwork (2 different versions)
RA
Download through Rom Manager
I then tried flashing CM 6.1 just to see if it would work and it worked just fine. I am downloading the file from the Myn official thread. It's Rls 4. Seeing how big the thread is and all the people using it, I know it works for tons of people.
I do all the steps as in wipe all the data and everything.
Any ideas on what could be the problem?
Click to expand...
Click to collapse
The RLS4 does not work well with the new radios..did u update your radios? Also if you did RLS5 is coming out very soon which does work with the new radios. If that is your situation I would recommend flashing a 3.70 rom that is out until RLS5 comes out. If you didnt update your radios i would ask in the myn thread about your situation. Lots of developments lately with recoveries and Hboots that you may want to look into to make sure you are runnig the correct recovery for your evo.
Actually I did update my new radios. When I probably should not have. My build is 3.3 and I had the 1.9 PRI and it caused my phone to stay in 100% wake and drain the battery constantly even with no use. Went back to 1.7 and it worked like a charm.
How can I flash back down to an older version radio? I have not tried this and I believe this may be the problem
Thanks man!!
Installed the older radio version and it started up like a charm!
barats said:
Thanks man!!
Installed the older radio version and it started up like a charm!
Click to expand...
Click to collapse
What version?
Sent from my PC36100 using XDA App
barats said:
Thanks man!!
Installed the older radio version and it started up like a charm!
Click to expand...
Click to collapse
Glad I could help dude
gqstatus0685 said:
What version?
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
last OTA update upgraded the radios for the evo...look in android development you can find caulkins thread about the new radios. He has an all in one package that can upgrade your radios or downgrade if need be.
edit: Look in my sig the updated wimax link
I'm running Alpha 6 and wanted to update my the PRL and Profile after installing CM9 because I also updated the radio to FF18.
try reprovisioning the phone?
http://forum.xda-developers.com/showpost.php?p=26131653&postcount=4244
lrrowley said:
I'm running Alpha 6 and wanted to update my the PRL and Profile after installing CM9 because I also updated the radio to FF18.
Click to expand...
Click to collapse
If I'm not mistaken you have to flash back to either stock or a gb rom that allows updating prl and stuff, update then flash back, but I also remember reading something bout long work arounds, you may have to do some Googling to find those
Or here, just found this hope it helps
http://forum.xda-developers.com/showthread.php?p=26792719
sent from my SGS2 running AOKP, eh...
tool2269 said:
try reprovisioning the phone?
http://forum.xda-developers.com/showpost.php?p=26131653&postcount=4244
Click to expand...
Click to collapse
I can confirm that this works.
Sent from my SPH-D710 using xda premium
Venomusdragon said:
If I'm not mistaken you have to flash back to either stock or a gb rom that allows updating prl and stuff, update then flash back, but I also remember reading something bout long work arounds, you may have to do some Googling to find those
Or here, just found this hope it helps
http://forum.xda-developers.com/showthread.php?p=26792719
sent from my SGS2 running AOKP, eh...
Click to expand...
Click to collapse
+1. Used Mobile ODIN to temporary boot to EL29 stock rom just last week & updated my PRL/fixed my GPS lock fine via this method. After watching/rewatching the video just to make sure I had all my files, it took maybe about 10 minutes at the most to do it and reflash back to CM9.
Hope you get that PRL update working OP!
In the future theres a temp el29 that was made a little while ago that'll save you some time and effort, it accomplishes the same thing....
Sent from my SPH-D710 using xda app-developers app
Hey thanks everyone for the tips I really appreciate it!
I notticed that my baseband was EL29. I was supprised that it wasn't causing trouble since it's GB and I was running CM9. I was under the impression that things worked best when modem and kernel were matching.
SO I updated my modem to FF18 and the Kernel/Recovery to TWRP 2.2.1 with FF18. Once rebooted, the WiFi was broken. (can't even turn it on). So I tried FF11 and still no go. I even tried going back to EL29.
No matter what I do, I still don't have WiFi. It's very frustrating. This is pretty much the first time in 2 years with multiple phones I've been completely stumped. anyone have any advice?
You running cm9, You can't use the update profile and prl in settings. There is a work around (google is your friend) on how to do it. But I believe thats the issue. every time i flash a new modem I do update profile and update PRL. you could flash to a TW ICS rom update profile and PRL and the flash back to CM9
found this:
http://forum.xda-developers.com/show...postcount=4244
Sent from my SPH-D710 using xda app-developers app
g_ding84 said:
You running cm9, You can't use the update profile and prl in settings. There is a work around (google is your friend) on how to do it. But I believe thats the issue. every time i flash a new modem I do update profile and update PRL. you could flash to a TW ICS rom update profile and PRL and the flash back to CM9
found this:
http://forum.xda-developers.com/show...postcount=4244
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
Can you re-post the link, I was unable to find that page. Also, where can I find a TW ICS rom? I don't see it on the wiki custom roms database.
Thanks,
Weird I havent had that issue on my phone im running FF18
I recently reverted back to stock recovery using the toolkit coming from CWM. I tried updating PRL or profile and I get the following error.
The PRL update could not be completed
...
Error: Connection Error (6500)
I used Triangle Away to see if that had something to do with it but no luck. Any suggestions?
Bump. Any suggestions would be appreciated.
Sent from my SPH-L900 using xda app-developers app
iamamutt said:
Bump. Any suggestions would be appreciated.
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
odin to stock, try updating your profile, then prl
i get this same error as well. Tried the odin back to stock but it didnt help.
JD
JudasD said:
i get this same error as well. Tried the odin back to stock but it didnt help.
JD
Click to expand...
Click to collapse
call sprint
skyjedi said:
call sprint
Click to expand...
Click to collapse
I did. They told me to visit my nearest repair center. That is always sprints answer to me because i live within 5 miles of 3 different facilities.
JD
JudasD said:
I did. They told me to visit my nearest repair center. That is always sprints answer to me because i live within 5 miles of 3 different facilities.
JD
Click to expand...
Click to collapse
i would do that then, IF you odin'ed back to stock and it still doesn't work there is something wrong with your phone.
Has either of you with problems tried to reset everything or ##786# reset
Sent from my SPH-L900 using xda premium
iamamutt said:
I recently reverted back to stock recovery using the toolkit coming from CWM. I tried updating PRL or profile and I get the following error.
The PRL update could not be completed
...
Error: Connection Error (6500)
I used Triangle Away to see if that had something to do with it but no luck. Any suggestions?
Click to expand...
Click to collapse
I think its a sprint issue. A lot of times when I flash a new ROM it will do that before data has a solid connection you can try the sprint diagnostics app. All credits go to big rush dog and team eos. I'll post a link for you as soon as I upload it to my drop box. Please visit the team eos thread in the spring gnex forums and thank big rush dog.
Edit: here's your link. Just flash it in recovery, and it will install the app.
http://db.tt/0IJxt0vi
Sent from my Galaxy Nexus using Tapatalk 2
skyjedi said:
i would do that then, IF you odin'ed back to stock and it still doesn't work there is something wrong with your phone.
Click to expand...
Click to collapse
I have the same problem as well...Nuthin wrong with the phone at all...When I reboot I just cancel out and let it reboot...I can update the PRL tho just not Profile...I read that not being to update profile would have an effect on LTE...But we just got LTE where Im at and Im smokin in the mid to high 20's Mbps...so I can see that not updating the Profile had no effect at all...Im doin the new JB Domination Rom 10.2 today...And Im gonna Reodin today just for the Hell of it and do a clean Wipe for the new Rom and see what happens... Ill try to update Profile while at stock before Root and see what happens...But the way Ive been runnin now it dosen't phase me at all...So if it goes back to the way it was...Its really no problem...And like somebody said it could be on Sprints end as well...But theres no way I would return the Phone to the store...
iamamutt said:
I recently reverted back to stock recovery using the toolkit coming from CWM. I tried updating PRL or profile and I get the following error.
The PRL update could not be completed
...
Error: Connection Error (6500)
I used Triangle Away to see if that had something to do with it but no luck. Any suggestions?
Click to expand...
Click to collapse
Try putting your network settings on CDMA only, reboot, try updating profile again...
It was sprint. I was able to update PRL this morning. I had restored my TWRP backup after using odin so my rom/data was not the culprit.
JD
JudasD said:
It was sprint. I was able to update PRL this morning. I had restored my TWRP backup after using odin so my rom/data was not the culprit.
JD
Click to expand...
Click to collapse
Yep you can update PRL...But not Profile...
ronny71 said:
Yep you can update PRL...But not Profile...
Click to expand...
Click to collapse
I was able to update both today.
JD
It turns out my issue was with having AdBlock installed.
iamamutt said:
It turns out my issue was with having AdBlock installed.
Click to expand...
Click to collapse
Yes, I can confirm that AdBlock was the culprit for me as well. I am trying to figure out whether it is also preventing me from downloading MMS in Hangouts.