Sometimes after I close my keyboard, the screen is split. Like the bottom half is on the top and the top half is on the bottom. I have to lock the screen and unlock it to fix it. Does anyone know a fix to this?
Just had the exact thing on my sons Slide, it ended up being the flex cable, had to replace it.
Where did you get just the cable?
sent from my MT3GS running CM7 nightly
I just ordered one on ebay.
Got mine from Ebay also.
Installed the new flex cable. Phone works perfectly now. Thanks!
Related
Hi dear developers!
I got a Touch Pro 2 from a friend, it's a GSM device he bought in Germany (O2). I changed a few parts but messed the main flex cable. The part from the power button is not connected anymore, a clean cut through, no repairs possible as far i think. So i bought a new one over ebay from Hong Kong. The seller told me it's for a GSM device BUT the cables do not look the same. The production date is 2008 and the damaged one was produced 2009. I built everything together and now the big surprise:
Phone boots normally but when the Home screen appears, it is always in landscape mode. No matter if the phone is closed or the keyboard open. I can only change the screen over advanced tools, but after soft reset again only landscape mode. The buttons for calling also do not work (those two down on the screen when you want to call someone or end a call ---> no reaction).
A hard reset and new ROM (energy) didn't change anything. By the way, the keyboard only fires up after pressing a button. Before it automatically lightened up after sliding.
What the hell is wrong now, did the send me a CDMA cable? Where is the difference ? Please help me i do not want to spent another 30 bucks again for a proper flex cable.
Edit: I disassembled the phone again and took a closer look on the flex cable: the lower part (with the LCD connection etc) looks quite same except for 3 or 4 transistors and their position on the PCB. The upper part with the earpice looks way different. The positioning of the single parts is not the same. But how can that interfere ? Guess there is no problem with the mainboard or the LCD (which is brand new).
Here are some pictures
h**p//img28.imageshack.us/img28/1514/image2sh
h**p://img849.imageshack.us/img849/8167/img1609m.jpg
OK, i solved the problem. The guy who sold the flex cable sent me a older one as I described. This thing was fully responsible for the errors. Bought a new one and everything works fine now^^ So if you ever want to change your Flex cable take good care which one you buy (especially on ebay!)
Btw: The display and the digitizer are glued and IF you want to replace any of those two, do yourself the favor and buy the complete bundle !!! I made the mistake and tried to replace the digitizer and cracked the display. There is no way as far as I can say, that you can manage this.
Bye
Can u post the seller info? Im in the same situation w a different phone... Thanks
Now I have tried looking up this problem, though not many results as I'm not really sure what I would exactly describe the happening of my screen besides grey. So forgive me if there has been questions like this already answered.
"Right now my Xperia Play screen is messed up screen. It started today when sliding the gamepad would freeze the system. Now, the screen is making this grey screen (pictures below) and freezes. Sliding out the gamepad and sliding it in seems to unfreeze it for a few seconds sometimes. Though, mostly, there's this. Is there any way I can maybe completely wipe my phone and reinstall Android? I have already flashed it once. Or is this a hardware issue and will I have to go to AT&T to see if I'm able to get a replacement phone?"
Like I said, I've already flashed it once. Did a Factory Reset before hand, though I didn't expect it'd do much. So any other solutions?
Maybe you should head to Sony Centre or AT&T to ask whether what's wrong with it. A reminder, unroot your device and get back to stock if you have custom rom and rooted your Play.
i think when you slid the gamepad it removed the cable connected to the screen. what was it called can't remember
I'm getting this a lot. I think there is a ribbon cable loose somewhere. I'll look into taking it apart sometime.
Same problem as my phone. The slider flex cable is the problem according to 4 old threads I found. If you're still under warranty, send it in. Otherwise, you can buy a new cable on Ebay like I'm doing, for 11 bucks and install it yourself.
...
captain67 said:
Same problem as my phone. The slider flex cable is the problem according to 4 old threads I found. If you're still under warranty, send it in. Otherwise, you can buy a new cable on Ebay like I'm doing, for 11 bucks and install it yourself.
Click to expand...
Click to collapse
were you able to fix it by changing the flex cable? i did change the flex cable but still same problem.
i don't think that the problem is the flex cable.. any idea guys?
zero801 said:
were you able to fix it by changing the flex cable? i did change the flex cable but still same problem.
i don't think that the problem is the flex cable.. any idea guys?
Click to expand...
Click to collapse
The problem is the flex cable, as I have the same problem.
You can find a replacement cable here.
http://www.ebay.com/itm/Slider-Slid...059?pt=LH_DefaultDomain_0&hash=item3ccc0f2003
I just bought this Xperia, works 100% with the screen opened, I close it and screen cuts out, but is still running, and reopening screen stays off. Is this possibly just the cable betwwn top and bottom faulty?? Anyone had this before?
kro02 said:
I just bought this Xperia, works 100% with the screen opened, I close it and screen cuts out, but is still running, and reopening screen stays off. Is this possibly just the cable betwwn top and bottom faulty?? Anyone had this before?
Click to expand...
Click to collapse
Yep, this has happened to me too. Its definitely the flex cable. The flex cable is the ribbon which connects the motherboard to the screen itself on the slider action. If you think you have warranty send it straight to warranty and they will probably repair it for you. If not, you can buy a full flex cable repair kit specifically tailored for Xperia Play on Amazon or Ebay. However, you do need some basic hardware knowledge to do this operation yourself.
So my xperia play had this fuzzy screen problem, after I bought the flex cable and replacing it I powered up the phone and seems it was working. Although the touch screen went completely unresponsive(buttons and gamepad work though). So what could possibly went wrong?
EDIT:Touch screen was working with the other flex cable.
Well this might seem like common sense but...maybe the new flex cable is also bad? I dunno :|. Did you try reusing the old cable to see if the touch screen worked again?
|SavageD| said:
Well this might seem like common sense but...maybe the new flex cable is also bad? I dunno :|. Did you try reusing the old cable to see if the touch screen worked again?
Click to expand...
Click to collapse
I might try putting the old one (with the fuzzy screen) again and hear if it does the unlock sound.
Will update with my findings.
i think youre moved tochscreen cable from it's place.
When I disassembled my xperia play for the first time,
the screen digitizer was damaged by my mistake.
I can't sure that, but I guess it can be.
At that time,
the bottom of screen (about 1/3?) didn't work.
So I bought the screen digitizer,
and replace it today.
But the problem hasn't been solved all the way.
If separate into 6 parts the screen from top.
(For example the top part is 1st part.
And beneath 1st part is 2nd part.)
5th parts doesn't work.
But the bottom 6th part works well.
I don't want to buy else new screen digitizer.
Please let me know how to use my xperia play with any problems.
Please help me.
Thanks about reading my thread.
Jaehyeok Koo said:
When I disassembled my xperia play for the first time,
the screen digitizer was damaged by my mistake.
I can't sure that, but I guess it can be.
At that time,
the bottom of screen (about 1/3?) didn't work.
So I bought the screen digitizer,
and replace it today.
But the problem hasn't been solved all the way.
If separate into 6 parts the screen from top.
(For example the top part is 1st part.
And beneath 1st part is 2nd part.)
5th parts doesn't work.
But the bottom 6th part works well.
I don't want to buy else new screen digitizer.
Please let me know how to use my xperia play with any problems.
Please help me.
Thanks about reading my thread.
Click to expand...
Click to collapse
Are you sure it's digitizer problem? Maybe it's flex
I had similiar problem, but in my case whole touchscreen didn't work and it happened randomly on reboot
It turns out that when i was repairing my usb port i somehow didn't place flex cable properly and it was bended over that metal part of slider.
Once i reopen it (only the part with motherboard on it) and place flex cable properly, touchscreen started to work normaly
How old is your Play? When you opened it, does flex cable looks damaged?
Where did you buy your digitizer? If it was from eBay, you could ask for a replacement from the seller you bought it from.
Like Bakisha, it could be the flex cable. If you know the digitizer is working, it usually is the flex cable.
Bakisha said:
Are you sure it's digitizer problem? Maybe it's flex
I had similiar problem, but in my case whole touchscreen didn't work and it happened randomly on reboot
It turns out that when i was repairing my usb port i somehow didn't place flex cable properly and it was bended over that metal part of slider.
Once i reopen it (only the part with motherboard on it) and place flex cable properly, touchscreen started to work normaly
How old is your Play? When you opened it, does flex cable looks damaged?
Click to expand...
Click to collapse
In fact, the flex cable of my xperia play looks a bit little.
The black color had been painted on cable wear a little.
So do you recommend me to replace flex cable?
RoboticBuddy said:
Where did you buy your digitizer? If it was from eBay, you could ask for a replacement from the seller you bought it from.
Like Bakisha, it could be the flex cable. If you know the digitizer is working, it usually is the flex cable.
Click to expand...
Click to collapse
If I ask for sending normal item without any problem again, should I send to seller the screen digitizer ?
Jaehyeok Koo said:
In fact, the flex cable of my xperia play looks a bit little.
The black color had been painted on cable wear a little.
So do you recommend me to replace flex cable?
Click to expand...
Click to collapse
Well, you could open your Play and see if flex cable properly placed. Open slider and put that white plastic inside metal frame. Put back dpad part of phone back, but keep an eye on that white plastic, it have two holes in motherboard to go into, then screw those two screws on motherboard (so it will make flex cable plug in motherboard - look if jack is now properly inserted
Close it and try it.
If you again have problems with touchscreen, then you have two options. Replace flex or replace digitizer. It's hard to say wich is faulty...
Sent from my R800i using xda app-developers app