Related
I installed the Android OS on my phone that was found on this post:
http://forum.xda-developers.com/showpost.php?p=5480057&postcount=7353
I updated it and everything to what he has but occasionally my hard buttons at the bottom will either stay lit or not respond at all. Or it will even go crazy as if I were sitting there spinning my finger around the middle hard button thus making it highlight everything on my menu. That also causes trouble because then it thinks that when I press the home key it decides to bring up the call log screen.
Is there anyway to disable the "iPod Scroll" on the center hard key?
Dude. You should update to the newest build. And update Rootfs and zImages.
everything is in the XDAndroid thread in this forum.
I updated to the one found here:
http://forum.ppcgeeks.com/showthread.php?t=104276
And my scroll wheel and hard buttons still mess up from time to time.
What device do you have? RAPH100?
Sorry I don't know the developer names but its the HTC Fuze for AT&T so it's either the RAPH100 or just the RAPH. The start up config I'm using for Droid is the RAPH config.
Its best not to touch the capacitive DPAD and scroller during boot up. (safe time is when you can see a n d r o i d or the bootscreen.) This and having the pad clean is very crucial if you don't want it going crazy.
Try cleaning it with a wet cloth/tissue and try again.
I also had a screen protector which was massively scratched which caused problems. Ever since removing it the DPAD has been working great.
dude i totally have the same problem.
i ve tried wipe it clean but no luck.
sometimes everything work great but all of a sudden the buttons go wild and start flashing. after that, nothing will bring it back to normal. maybe after a few minutes if will stop blinking, lefting one or two LEDs on, and the button is then less responsive, though still works if you place your finger on the button you want for a few seconds before pressing.
I've seen a few people complaining about this but other says its because of our own device...
However everything works normally in WM... so i guess it might be about the sensitivity or something like that.
no matter it get fixed or not, I do want a method to disable the scrolling too, and maybe the left and right buttons, because they never work even under WM...
Yeah, mine does that too. Its random, sometimes not happening for days, then all of the sudden it starts. And this is within the same boot. Very odd. BTW, I keep up on all builds, always update asap, and my pad is spotless. I can't really figure it out.
also getting the exact same problem a lot, with everything up to date, clean, and not touching on bootup. would it be difficult to implement a code where we could just disable the middle scroll wheel? thats the thing that causes the most problems, and its not really that useful anyway.
@reverendkjr
This may be off topic but, you say you leave your phone running Droid all the time? How do you not drain your battery in like 4 hours unless you leave it charging all day?
But I'm pretty sure I'm as up to date as I can be and I still get this issue.
twiggy159 said:
@reverendkjr
This may be off topic but, you say you leave your phone running Droid all the time? How do you not drain your battery in like 4 hours unless you leave it charging all day?
But I'm pretty sure I'm as up to date as I can be and I still get this issue.
Click to expand...
Click to collapse
Its not off topic at all. I have been using Xandroid as my one and only OS for about a month now. I do charge it quite often, and I leave it on my desk at work on a charger. I also charge it at night as I sleep. I start off the day with 100% and can go 6 or so hours without issue. I continuously get 3-4 days in a row without a reboot or a failure. I find that it has become a suitable alternative to Winmo. The difficulty that I have is that there are primary functions which I miss a bit (camera mostly). But I feel that in order for me to fully understand and appreciate this, and to be able to contribute as a quasi beta tester, I must be willing to spend as much time with it as possible. I keep up with these forums on a regular basis , checking them sometimes 2-3 times a day. It is difficult to distinguish helpful info sometimes, since there are several versions floating around, and not everyone has the same setup & environment. I search as much as I can to find my own solutions, and for the most part, I'm relatively proud of myself. I usually only chime in when something is really bugging me, or I see something valuable that I can add to a conversation.
This issue was one that I had seen a few people talk about, and it had always been chalked up to being a dirty sensor type of thing, or someone touching the pad while it was booting. Having tried all of these solutions with no success, I had come to the determination that it was not constant, it could be ignored or dealt with, and eventually someone would fix it. It is most definitely not a "hot" item, so I never made a stink about it. Now that others have brought it forward, I decided to add my experiences.
I have loads of respect for the developers, and realize that they are not doing this for me. They are doing it for themselves, and fortunately, they share it with us. I am envious of their ability to make this project possible, and have no expectation or demands. I just take what they give us, and try to make it work for me.
Just my two sense, I'll step away from the pulpit now.
+1 for Navigation Wheel or capacitive D-pad issue
reverendkjr said:
Yeah, mine does that too. Its random, sometimes not happening for days, then all of the sudden it starts. And this is within the same boot. Very odd. BTW, I keep up on all builds, always update asap, and my pad is spotless. I can't really figure it out.
Click to expand...
Click to collapse
May I appeal to the developers to move Raph110 Navigation wheel to "Not working" so further development can occur. I do not touch the wheel during boot, but it still randomly flips out. My screen is clean. I did the clean cloth thing. The Navigation wheel not only flips out going all over the place. It actually rarely works the way it should in any application.
All I really need is to turn it off or disable the Navigation wheel if at all possible. Is it necessary to load the Nav-wheel capacitive drivers or can we disable them? Would it disrupt the function of the D-pad if disabled because all I need is the D-pad.
Chime in RAPH110 guys. Would you care if the Nav-wheel was disabled, because I actually think this is what is causing the issue.
I just want to make sure that I communicate to any developers that this is not a major issue. To me, I feel as though this is the only issue that I have at all. With the build I use, I honestly have no other issue which means that the Raph110 Android end product is 99% complete. To be direct, Thank you! I feel as though you purchased me a new phone, so this is no way a complaint. It is only the last 1% quality assurance analysis. ;-)
Edit: I just re-read this thread and the common denominator is HTC Fuze or RAPH110 users are having this minor issue. RAPH100 posting are saying "Just read the thread" or "use updated packages" or "clean the screen" which I think may all work and be valid for you RAPH100 users. I can indeed say without a doubt that this does not work for RAPH110.
In order for me to stop the random D-pad/Nav-wheel random scrolling, I have to screen lock it, let it go to sleep, then it might stop. It does stop mind you, but it is quite random how I am able to stop it.
spideyngo said:
May I appeal to the developers to move Raph110 Navigation wheel to "Not working" so further development can occur. I do not touch the wheel during boot, but it still randomly flips out. My screen is clean. I did the clean cloth thing. The Navigation wheel not only flips out going all over the place. It actually rarely works the way it should in any application.
All I really need is to turn it off or disable the Navigation wheel if at all possible. Is it necessary to load the Nav-wheel capacitive drivers or can we disable them? Would it disrupt the function of the D-pad if disabled because all I need is the D-pad.
Chime in RAPH110 guys. Would you care if the Nav-wheel was disabled, because I actually think this is what is causing the issue.
I just want to make sure that I communicate to any developers that this is not a major issue. To me, I feel as though this is the only issue that I have at all. With the build I use, I honestly have no other issue which means that the Raph110 Android end product is 99% complete. To be direct, Thank you! I feel as though you purchased me a new phone, so this is no way a complaint. It is only the last 1% quality assurance analysis. ;-)
Edit: I just re-read this thread and the common denominator is HTC Fuze or RAPH110 users are having this minor issue. RAPH100 posting are saying "Just read the thread" or "use updated packages" or "clean the screen" which I think may all work and be valid for you RAPH100 users. I can indeed say without a doubt that this does not work for RAPH110.
In order for me to stop the random D-pad/Nav-wheel random scrolling, I have to screen lock it, let it go to sleep, then it might stop. It does stop mind you, but it is quite random how I am able to stop it.
Click to expand...
Click to collapse
I think mine is a RAPH100... i cant take out the battery and double check... but mine is a unbranded version fron 3 australia... which i remember is raph100. and i totally have the same issue so this is not only happening on raph110 i believe.
Hey guys,
I was having the same problem in wm6.5 using many different energyroms, i disabled the scrollwheel altogether within the registry, never used it anyway. I am now getting the same problem in Android. is there is a registry parallel in android?
btw using a RAPH100 (all above fixes did not work)
devs, is there no easy way to implement a disable scroll wheel setting?? i swear that wheel will drive me crazy at times
While this could be an issue with all Raph 110's (AT&T Fuze), I think it is just a subset due to hardware problems. For me, the problem only happens occasionally and it does not only occur in xdandroid, but also in WM. There is an HTC tool (for WM) named NavDbgTool.exe that will show you what is happening with the capacitive buttons/touch area on the Raph. For me, when I have issues it lights up all over and shows touches occurring that are not occurring. I know of at least one XDA member (Captain Throwback) who was able to get a replacement phone (a Tilt2) from the insurance carrier because of this issue.
Perhaps this is a problem that eventually happens with all Raph 110's due to a hardware flaw. If that is the case, maybe enough complaints to AT&T will cause them to replace all of the devices (similar to how Sprint is replacing all their Touch Pro's due to overheating issues). In the meantime, if you have insurance, you should be able to get a replacement phone, just use the NavDbgTool.exe to document the problem in WM.
Also, due to this issue, it would be nice to have the option to disable the capacitive touch area on the Raph 110 in xdandroid (while keeping the D-pad working). I don't use it for anything now that zooming doesn't work for recent versions of Opera in WM.
I'm starting to think that this is Winmo ROM related. I noticed that since I've used the ROM that I have installed right now, the amount of times this issue has affected me has been slim to none. I am currently running the an NRG rom from june 12 with sense 2.5.
link: http://hotfile.com/dl/47992175/ccd8b44/Energy.RAPHAEL.21905.Sense2.5.Jun.12.7z.html
I'm not guaranteeing anything, but its working for me.
Maybe it has something to do with a package that is built into certain roms. I have noticed a few times where the winmo ROM i have loaded will affect Android's performance as well. The ROM that I am currently running was also what provided me with the ability to get GPS working in Android.
I hope this helps some of you.
I don't think it has anything to do with WM. For me, it only happens in Android.
firstly i have a raph100 that has this issue too, so its not just raph110
secondly, for me, this happens in wm too but a lot less frequently and seems to repair itself. It happens in android 70% of time when i boot, the 30% else happens later...
newly released zimages seem to shutdown the capacitive panel when sleeping, and this solved my problem a little bit since every time it goes crazy I can put the device in sleep then resume it...
But when it goes asleep the two buttons on the right act as back, the two on the left act as home. I think there is only one physical button on both sides, the touch figures if you are pressing back or end.
Sent from my AOSP on XDANDROID MSM using XDA App
Hello all, First, I searched the forums for my answer with no such luck, that being said if Im repeating a question thats been asked I apologize. I have a problem with keeping android stable. I have flashed with different versions of windows several times all with success. I do however, prefer the android system, I find that it runs much better, faster and has better perks. Everytime I flash following the original how to, I run in to a couple similar problems.
The first is when I hit the power (not hold the power) the back light cuts off and the keyguard enables, the screen goes dark all as it should. Depending on the time ( the longer it is the worse it is) when I hit the power key to revive my phone, I often get a white screen, then it waits , then it goes dim, Sometimes If I hit the power button several times it eventually comes back to the key guard option, but others I have to remove the battery and reboot. This is the major problem, as I cant use my phone when I need it. This problem seems to get worse the farther it gets away from the flash date, e.g..,, after a brand new flash it works pretty good and then it goes downhill from there.
Second, it seems to lock up when I let it charge overnight, not always (but most of the time) I get up, click the power button to revive the phone and I have a white screen before me that is frozen solid. This like the previous problem seems to be linked to the distance from the last flash.
I hope that its something Im doing wrong, as Im currently using wmobile 6.5 and since Ive had a taste of the droid os, my wm phone is just disappointing. And as I was unsuccessful in finding a post that adequately describes my problem ,Im hoping that there is a way around this .
I have tried, Incubus Superfroyo, Wrym warm donut, and Cyanogens build. Im sure Ive tried others, they just escape me, I was re-flashing daily until I went back to windows. I truly hope someone out there has encountered what I have and has a solution. thank you all for what you do, these forums have been extremely valuable and helpful.
Sounds like you have the wrong panel type selected. Is it set to auto? if it is, try setting it to 2 instead. That cleared up the problem for me.
Tried all panels all have the same problem.
Well thanks for all the many replies. I give Ive tried everything on this site and m android is still really glitchy. Guess it will be windows until I get perhaps a phone capable of running android smoothly.
What kind of phone do you have?
Sent from my HTC Vision using XDA App
do you have an SD card you can try to boot from and share your settings?
What we need to know is which kernel you're using, or an image of the kernel you currently have. Also, we need to know which radio version you're using, as this can have detremental effects on stability as well.
Personally, I have been using radio version 1.70.19.09, which seems to be the most stable with kernel .25 IMHO.
I have also "personalized" ThoughtlessKyle's "Fat-Free Froyo", adding/removing apps that I need or don't use respectively (navigation, QQPlayer, Pandora, etc.).
Currently, I think I might be one of the only people not experiencing any issues with this phone running Android 2.2.1. I do get the occasional "hang" (I wait for it to finish what it's doing instead of force close), but that usually has something to do with network coverage or an app requesting something from an unopened port.
Old phone, new OS and runs smooth as could be expected.
Next for me will be the HTC HD2 (if I get one at the right price, the tilt was free)...
I know, I know that MANY PEOPLE THINK OF THE WAKE UP WHITE JIBBERISH SCREEN as NEVER WORKING.
PoXFreak said:
What we need to know is which kernel you're using, or an image of the kernel you currently have. Also, we need to know which radio version you're using, as this can have detremental effects on stability as well.
Personally, I have been using radio version 1.70.19.09, which seems to be the most stable with kernel .25 IMHO.
I have also "personalized" ThoughtlessKyle's "Fat-Free Froyo", adding/removing apps that I need or don't use respectively (navigation, QQPlayer, Pandora, etc.).
Currently, I think I might be one of the only people not experiencing any issues with this phone running Android 2.2.1. I do get the occasional "hang" (I wait for it to finish what it's doing instead of force close), but that usually has something to do with network coverage or an app requesting something from an unopened port.
Old phone, new OS and runs smooth as could be expected.
Next for me will be the HTC HD2 (if I get one at the right price, the tilt was free)...
Click to expand...
Click to collapse
Ill try that combination and post my results. The latest I tried was
Scoot CyanogenMod 6.1.2 RLS6 with 2.6.32 still no joy, white screen crashes and hang ups. and it seems progressively worse the longer the rom is on the phone. To whomever asked what phone I have, its the at&t tilt II
srlebonv said:
Ill try that combination and post my results. The latest I tried was
Scoot CyanogenMod 6.1.2 RLS6 with 2.6.32 still no joy, white screen crashes and hang ups. and it seems progressively worse the longer the rom is on the phone. To whomever asked what phone I have, its the at&t tilt II
Click to expand...
Click to collapse
I can't help you regarding panel selection but, please have Radio ROM version 1.65 or higher. And do give my fresh foryo a go with 2.6.25 kernel (everything is there in the thread on how to use it with 2.6.25 kernel).
the WHITE GLITCHY SCREEN IS THE PROBLEM WITH ANDROID DRIVERS. Install with Data on SD Card often causes lockups / force closes.
I am using panel type 1 and white glitchy screen stays for like half of a second and next moment I get a nice clean keylock screen. I don't know but its like 20th time I am explaining the problem related to LCD
Change Panel Type, Get a compatible Radio version (1.65.x or HIGHER)
You say that often install with data on the sd card causes lock ups and freezes. Can you explain further what you mean ?
dark_prince said:
I can't help you regarding panel selection but, please have Radio ROM version 1.65 or higher. And do give my fresh foryo a go with 2.6.25 kernel (everything is there in the thread on how to use it with 2.6.25 kernel).
the WHITE GLITCHY SCREEN IS THE PROBLEM WITH ANDROID DRIVERS. Install with Data on SD Card often causes lockups / force closes.
I am using panel type 1 and white glitchy screen stays for like half of a second and next moment I get a nice clean keylock screen. I don't know but its like 20th time I am explaining the problem related to LCD
Change Panel Type, Get a compatible Radio version (1.65.x or HIGHER)
Click to expand...
Click to collapse
Ok, so I installed your version of froyo, the accompanying 2.6.25, the radio that you use. For the most part the hanging up is fixed. Now the second problem is still in place. Sometimes when Its been in hibernation(or whatever you would call when you hit the power button once ) when I attempt to refresh my phone (hitting the power button once) nothing happens, the green light is still blinking at the top but the screen stays blank, normally have to remove the battery and restart to get back to using the phone. Is this a sleep setting? or is this something Ive done wrong during the installation.
Kernel - http://forum.xda-developers.com/showthread.php?t=1414876
ROM - http://rootzwiki.com/topic/11472-rom-android-revolution-hd
Loaded them up perfectly clean, just like the directions explained, no problems during installation.
Now - this was my fault, I should have tested by restarting the phone with both loaded prior to installing an app, but I just had to get the EX Go Launcher :-( Well, after installing that is when I first attempted the shutdown since loading the kernel. That's when it just sat at "shutting down" and never shutdown. left it for 5 minutes, nadda. It will turn the radio off, and you can see any activity in the background, but it will sit there at that shutting down screen pretty much indefinitely, until you pull the battery. You can still hit and hold the power button, which gives you another shut down prompt that overlaps the first one. You hit the shut down, just does the same thing and sits there.
So just a report for you folks. I would be reporting this on the kernels respective thread, but I don't have enough posts and it directed me to post here, but that kernal and rom seemed like the perfect duo. I didn't have patience to reload the rom and kernel since then, so I can't confirm if it works with the go launcher. Or maybe it was just a fluke and it will work with another reload. I'll continue to keep this thread updated, I'll be doing it again within the next couple weeks.
UPDATE: Not sure why I didn't try this before, guess it sounded to simple to make sense, but I just uninstalled the Go Launcher from the OS and all is top notch. Phone shuts down without an issue. So it's so the combination of the two, or one of the two thereof the not cooperating with go launcher.
Otherwise, loving the combo. So far better battery life and smoother operations. Still trying to figure out how to adjust the CPU performance, or set it to auto throttle. But, all with time.
EDIT: Mods please feel free to throw [REVIEW] in my thread title, missed that part
Hi I bought my GNex in January and lately it's been having more and more issues.
Here's a list of what happens so far:
1) Low battery life - about 6-8 hrs with minimal use
2) Low 3G and 4G signal - usually 1 or 2 bars
3) Camera sometimes becomes unresponsive requiring a reboot to start up again
4) Sometimes the phone will be unresponsive in lock screen requiring to reboot by removing battery
5) A lot of apps become unresponsive or crash - happens daily with 10+ different apps
6) Sometimes my soft key buttons (back, home, windows) buttons will disappear and not come back (happened while using GoSMS)
Verizon told me that the new update will be coming out this month. Do you think it will resolve all of these issues? I'm hesitating with getting a refurbished phone. Has anyone had any issues with refurbished ones? Thank you to all who reply.
1) Low battery life - about 6-8 hrs with minimal use
This is pretty much the only downside I see with the Nexus. It's a great phone, but the battery life is terrible.
2) Low 3G and 4G signal - usually 1 or 2 bars
I'm running the 4.0.4 radios, which have a (cosmetic) fix for this. 3G data always seemed to work fine for me with only 1 bar, though.
3) Camera sometimes becomes unresponsive requiring a reboot to start up again
This happened to me a few times with the stock ROM. The current ROM I'm running (GummyNex, compiled from source) is based off of Android 4.0.3 and has never done this.
4) Sometimes the phone will be unresponsive in lock screen requiring to reboot by removing battery
See previous answer.
5) A lot of apps become unresponsive or crash - happens daily with 10+ different apps
Probably the apps' fault.
6) Sometimes my soft key buttons (back, home, windows) buttons will disappear and not come back (happened while using GoSMS)
This has happened, but it seems like if you just rotate 90 degrees one way and then back, you can usually get them to come back.
So...to answer your question, even Android 4.0.3 is a decent improvement over 4.0.2 in terms of stability. The forthcoming update is Android 4.0.4, IIRC. There's no point in getting a refurbished phone right now, since you'd still be running stock 4.0.2.
Everything you mentioned can be fixed with a custom rom, kernel, and baseband/radio flash.
If you don't want to do that than.... Yes return the phone.
Sent from my Galaxy Nexus using XDA Premium App
question, nahingp
1)
You should look around for apps telling you what causes this battery drain. You might have installed apps preventing your phone from going to propper sleep
2)
I guess this depends on where you live and move. Is your network also this slow?
3)
Now this is a reason to give back the phone! It seems to me like it is a guarantee issue!
4)
See previous answer (I am not a friend of custom roms and flashing )
5)
Could you name one or two of them?
6)
Maybe after all you first should try to do a reset sounds a little bit like a software error...
So for the entire year and a half I have had my T-mobile G2 (aka HTC Desire Z) my touch screen has had issues.
It seems to happen mostly when I am doing something memory intensive, but not always.
My screen either goes completely unresponsive to touches or acts like only 1 touch is performing “pinch to zoom”.
To remediate this issue I have to hit my top power button to turn the screen off and then back on, but this is just a temporary fix.
It does seem to last a little bit longer before starting this behavior if I do a complete reboot.
My phone is still usable but this is an ultra-annoying issue that I believe should be able to be fixed. I have used task killers and messed with the performance options in cyanogenmod to no avail.
This has happened on the stock ROM and every other rom I have ever run. I am currently on Andromadus Alpha (http://forum.xda-developers.com/showthread.php?t=1349864).
Thanks for any help in advance.
I have the same problem since its new.
It does it when the screen is dirty too.
Makes a huge difference when I'm using my old moto milestone, the screen is more responsive.