Develop Bugs

Clingo Universal Hands-free mount review.

I went ahead and purchased the clingo car mount
http://www.clingo.com/car-mounts/universal-hands-free-mount/
for $25 shipped off of eBay (find it yourself) after it was mentioned by a member on XDA. It looked cool to me and since I didn't enjoy my Soundgate M2 mount to much I decided to give it a try.
I must say that I am very happy with the purchase. It works flawlessly with my EVO. I have tried it with two different cased, one was a regular tpu style and then with this case http://www.amazon.com/High-Quality-...?ie=UTF8&s=electronics&qid=1281911569&sr=8-1\
I'm not sure what material its made from but it is comparable to leather.
Both cases worked perfectly. They stuck to the Clingo adhesive without any problems and most importantly, they stayed there. A naked EVO will work just as well.
I have had the mount only for a couple days, but so far I have driven relatively long distances without no issues whats-so-ever. I live in houston tx btw, it's 5:35 rite now and 97* degrees outside, just to give you an idea of my environment.
The adhesive on the clingo does not seem to be losing its stickiness at all after my first couple days. I found this on clingos website.
http://www.clingo.com/articles/technology
If those are true facts then you can expect this baby to last a while...
Installation was extremely easy. I have mine attached to my windshield and it sticks to it like a champ. There is an optional attachment that allows you to stick it to your car dash board which works very well also.
overall I HIGHLY recommend this product if your looking for a decent car mount and in all honestly if I was to buy a home dock for the EVO I would get another clingo. It's so simple yet practical.
I know with all these knew docks coming out from htc/sprint/eBay/wireforless nobody really considered getting a Clingo product, but you can find them for relatively cheap off of eBay and it seems like it would look nice in an office/home environment. talking about this btw http://www.clingo.com/home-and-office/universal-podium
this seems pretty neat also, might scoop it up once I get some extra cash.
http://www.clingo.com/home-and-office/parabolic-sound-sphere
I dont see a need to spend 50+ on a dock just because it charges your phone. You can get a couple spare batteries, a car charger, home charger, usb cable and screen protectors for under 20 off of eBay. That matched with a Clingo product is all I need.
P.S - I suck at writing reviews. This is just my attempt to help some fellow xda members make a decision on an accessory for there phone. If your coming here to hate on my grammar and the way I type (which i have seen A LOT of lately on XDA. Must be the summer heat or something) then troll on my friend.
Oh yeah! and if you guys want a video of the mount just let me know. Only problem is my EVO is my video recorder, but I can still go ahead and try it if ya'll want.

Thanks for the review! I was actually just on their website before I came across your post. (Its actually still open in another window lol.) Can you comment on the amount of weight it can support based on its area? I know some of the pads for the phone were pretty big, but other were smaller circles. Do you think the smaller ones would be able to support our Evos?

"It’s pretty simple, really. Clingo holds your phone. It doesn’t matter if it is a BlackBerry, iPhone, Droid, Samsung, or whatever. Whether in your car, at the office, at home, or wherever - Clingo holds it."
That's a statement from the clingo website. That is for all there products except for the little necklaces which are designed specifically for iPod nanos. So according to them any of there products should be able to support any mobile device, including our EVOs.
From my experience, which is still limited, it really doesn't seem like too much surface area is necessary to grip the phone. Also, all the "Universal Products" seem to have the same surface area and shape. They only have two products that I can see with smaller surface area. One is the nano necklace and the other is the parabolic sounds sphere....
However, I remember somebody posting something about there evos slipping a little bit while using the clingo car mount and an innocase. Not sure how accurate that is though.

starplaya93 said:
However, I remember somebody posting something about there evos slipping a little bit while using the clingo car mount and an innocase. Not sure how accurate that is though.
Click to expand...
Click to collapse
He stated the arm came down a bit, the phone itself stayed put on the holder, but the entire assembly (ball joint) rotated down a bit.

ahh...well in his case all he had to do was adjust the knob and tighten it, which is easily done.
Thanks for clarifying that.

starplaya93 said:
ahh...well in his case all he had to do was adjust the knob and tighten it, which is easily done.
Thanks for clarifying that.
Click to expand...
Click to collapse
I believe you guys are referring to my post here: http://forum.xda-developers.com/showpost.php?p=7667216&postcount=22
When using the mount with my Evo and Innocase Active Limited Edition, problems arose between the pad and the ball joint at the end of the arm (where you can adjust the pads' viewing angle). The arm wasn't moving at all since it was as tight as I could get it to be. While driving, the added weight of the case was causing the pad to move downward. It felt like it was much easier to move the pad around the ball joint when the case was in use. I tried every which way to get the phone to sit still but it continuously moved down, to the point where I couldn't view the screen very well at all.
It doesn't really bother me, though, since the mount works perfectly on a naked Evo. Once I removed the case, the pad was not moving whatsoever and the connection between it and the jointed ball seemed much stiffer.

I just ordered the parabolic sound sphere... gonna play around with that before i pull the trigger on a car mount

hx3 said:
I believe you guys are referring to my post here: http://forum.xda-developers.com/showpost.php?p=7667216&postcount=22
When using the mount with my Evo and Innocase Active Limited Edition, problems arose between the pad and the ball joint at the end of the arm (where you can adjust the pads' viewing angle). The arm wasn't moving at all since it was as tight as I could get it to be. While driving, the added weight of the case was causing the pad to move downward. It felt like it was much easier to move the pad around the ball joint when the case was in use. I tried every which way to get the phone to sit still but it continuously moved down, to the point where I couldn't view the screen very well at all.
It doesn't really bother me, though, since the mount works perfectly on a naked Evo. Once I removed the case, the pad was not moving whatsoever and the connection between it and the jointed ball seemed much stiffer.
Click to expand...
Click to collapse
ohh, ok...maybe the innocase just adds a little to much weight for it to manage.... Have you tried cleaning the Clingo and trying it again?

dmc971989 said:
I just ordered the parabolic sound sphere... gonna play around with that before i pull the trigger on a car mount
Click to expand...
Click to collapse
Let me know how that goes. I'm considering buying it, but I want to know if it actually amplifies sound at all be I go for it.

starplaya93 said:
ohh, ok...maybe the innocase just adds a little to much weight for it to manage.... Have you tried cleaning the Clingo and trying it again?
Click to expand...
Click to collapse
Yeah, several times. My problem isn't with the stickiness from the green area of the pad, it's with the back where it connects to the ball joint. With or without the case, the phone doesn't slide or fall off the sticky part of the pad at all. But when I use the case, the pads' construction moves down as if it's sliding from the ball joint due to too much weight.
Kind of hard to explain clearly. The phone sticks to the pad perfectly in any scenario, though. I just think the Evo + Innocase Active is too heavy for this mount unless some slight modding is done. Nevertheless, I'm content with using the phone with no case when used with the mount. Works just fine then.

starplaya93 said:
Let me know how that goes. I'm considering buying it, but I want to know if it actually amplifies sound at all be I go for it.
Click to expand...
Click to collapse
Oh I have absolutely no doubt that it will amplify sound, im just not sure how much louder it will make things... or if its going to have any strange/****ty frequency response

hx3 said:
Yeah, several times. My problem isn't with the stickiness from the green area of the pad, it's with the back where it connects to the ball joint. With or without the case, the phone doesn't slide or fall off the sticky part of the pad at all. But when I use the case, the pads' construction moves down as if it's sliding from the ball joint due to too much weight.
Kind of hard to explain clearly. The phone sticks to the pad perfectly in any scenario, though. I just think the Evo + Innocase Active is too heavy for this mount unless some slight modding is done. Nevertheless, I'm content with using the phone with no case when used with the mount. Works just fine then.
Click to expand...
Click to collapse
In other words it goes from this | to this /
Take a black zip tie, wrap it around the back where the ball goes into the socket and cinch it down some, may be just what you need to add that bit of extra grip.

Great review.. I have the car dock, the tethering pad and the sound sphere on the way.. should be here today.

Well, all my stuff showed up. The parabolic sphere is pretty cool. It does increase the volume somewhat and maybe add a little reverb to the noise. The tethering pad is okay as well.
The car dock, however, sucks. It would probably be great on a lighter phone. So far my Evo has fallen off 3 times and seems to slide around on the pad. Pretty disappointing.. looks like my quest for a good car dock will continue.

Well, Ive done everything I could do to make the car mount work and it just wont. The design is poor and it reflects in the performance of the dock. My dock will not stay where I put it, instead sagging down and eventually dropping the phone. Ive tried everything short of wire tieing it in place (Yay for ghetto engineering) and I cant make it stay. Ive tried zip tie around the neck of the mount, stuffing tape into the ball and socket, etc.. nothing helps. Guess this one is going to end up in the trash pile too along with every other Evo mount Ive bought.

If you'd point out the failing was in the positioning of the mount, and not the mount's ability to hold the phone on its sticky pad, you might have a good chance of selling it here for not much less than you paid for it.

VW91N3 said:
If you'd point out the failing was in the positioning of the mount, and not the mount's ability to hold the phone on its sticky pad, you might have a good chance of selling it here for not much less than you paid for it.
Click to expand...
Click to collapse
Well, its not just that. The Evo IMO doesnt stick to the pad very well. Maybe its the oil from my hands but I had to put a plastic case on the phone just to get it to stick. For a Nexus one or something, it probably would be great. The Evo is just too much of a beast for this mount.
On a side note, I emailed Clingo about calling me regarding this mount. Its been 2 days and no call back. Another strike against Clingo.

The rattle and shake of my universal gooseneck holder has been driving me crazy since day one, and I've been looking for another option. After watching the clingo demo video with the guy flying over speed bumps I decided to give it a try.
I've been using it in my car for a week now, and am very happy with it. Right out of the box it held my EVO (in the innocase active) no matter how hard I shook it. The grip of the pad is amazing.
As others reported, the size/weight of the EVO caused it to droop forward. If I turned the pad sideways it stayed up better, but a small black zip tie around the socket completely fixed the drooping. I figure putting a small piece of rubber band into the socket should also do the trick while still allowing repositioning.
The result has been stunning. Even over big potholes and grooved highway pavement the clingo has kept my phone still. It is soooo much easier to read without the phone shaking.
Now to see how the cling pad holds up to new england winter.
JAson

bhtoque said:
The rattle and shake of my universal gooseneck holder has been driving me crazy since day one, and I've been looking for another option. After watching the clingo demo video with the guy flying over speed bumps I decided to give it a try.
I've been using it in my car for a week now, and am very happy with it. Right out of the box it held my EVO (in the innocase active) no matter how hard I shook it. The grip of the pad is amazing.
As others reported, the size/weight of the EVO caused it to droop forward. If I turned the pad sideways it stayed up better, but a small black zip tie around the socket completely fixed the drooping. I figure putting a small piece of rubber band into the socket should also do the trick while still allowing repositioning.
The result has been stunning. Even over big potholes and grooved highway pavement the clingo has kept my phone still. It is soooo much easier to read without the phone shaking.
Now to see how the cling pad holds up to new england winter.
JAson
Click to expand...
Click to collapse
great to here its worked out well for you. I've had mine for a while and am still loving it, however, i'd like to try out the rubberband trick that you are speaking of... What exactly did you do? How big was the rubber band?
Mines has held up to texas weather 100+ with my car out in the heat, so hopefully it can handle the cold also.

starplaya93 said:
great to here its worked out well for you. I've had mine for a while and am still loving it, however, i'd like to try out the rubberband trick that you are speaking of... What exactly did you do? How big was the rubber band?
Mines has held up to texas weather 100+ with my car out in the heat, so hopefully it can handle the cold also.
Click to expand...
Click to collapse
I have not used the rubber band trick on my Clingo, as the zip tie stopped the droop, but I've done it with similar ball joints. You should be able to find a small bag of rubber bands at your local office supply big box. One about 1/4" wide should do with the clingo. Just cut a piece out of the band and put it into the socket as close to on-center as you can. Line up the ball on the clingo's arm so that the mount pad will be close to the angle you want it, and snap the pieces back together. The rubber will provide grip, and provide enough to stop any drooping while still allowing you to reposition and swivel the mount head.
JAson

My KF Stand.

My first stand for KF.
Comment welcome.

You might want to try using a good wood stain instead of black paint to give it a more finished and professional look. At least, that is the route I would go. Otherwise not bad...although your KF looks pretty dusty.
Something I thought of while looking at the pictures was the idea of using a tight hinge on the back wood part to allow you to adjust the angles. You could also mount some small but nice speakers on the back base behind the kindle to plug into it and give it some extra volume. You could, possibly, even hollow our a couple of speaker holes to drop them into the base as well. Lots of neat ideas are coming to me as I write this!

If you're going to do the speaker install on the back of the stand these speakers might be a good pair, they're from another thread on here.
http://www.amazon.com/dp/B004R26IYE/ref=pe_175190_21431760_cs_sce_dp_1

better before painting

I liked it w/o the paint, perhaps a wood stain + varnish would've been better, or some really really dark stain. Nice job though, gave me an idea to do something similar since I do have the basic tools lying around Thanks...
p.s What cover are you using on your device? Pretty light & nice.

I can't see any cover...

The water proof thread

So to kick it off, I've got two "pouches" that are supposed to be watertight. I haven't checked if they are actually water proof, but I can say something about the fit (or misfit).
1. Had the Hagløfs Watatait for the S1. Plastic made it impossible to insert the phone. I had to use a metallic case on the phone to get it in the pouch.
The S3 have the same problem. Its slightly less "clingy", but edges on phone get stuck before fully inserted. There is no room for a phone with case.
2. Got the Overboard case from mobilefun. S3 slides nicely into the pouch. Locking feels safe enough, to the point of being over-engineered. The clear plastic window is slightly small, making it hard to pull down the notification menu. Also a bit fiddly to find the power and volume buttons.
Its also a very tight fit. I suspect its made for the iphone, with room for protection for that phone. Any case that offer enough protection for the S3 make it too big for this pouch.
So anyone else have a watertight pouch case they want to share with the rest of us?

I'm a biker, after much trial and error I found the Northcore surfing cases and bought one for my old phone (Desire). Got my S3 today and while tight it does fit the bare phone with no problems and leaves it easily operable. I usually have the phone strapped to my left forearm and have some capacitive thread stitched into the index finger of the right glove and a bluetooth headset for sound. Add in Tasker to deal with automation and it makes the phone really easy to use.
This is the beastie:
CLICKY

I'm hoping Liquidpel will be available for this device. http://www.liquipel.com/
Basically they coat the entire phone + internals with hydrophobic material, that way even when water gets into the phone, it remains working.

I used a waterproof pouch when I was on my last cruise. Put my epic touch in it and went snorkeling for hours with it in my pocket. It was under water the whole time, no leaks. I bought it from Amazon.com.
Sent from my SPH-D710 using xda premium

tarmacsurfer said:
I'm a biker, after much trial and error I found the Northcore surfing cases and bought one for my old phone (Desire). Got my S3 today and while tight it does fit the bare phone with no problems and leaves it easily operable. I usually have the phone strapped to my left forearm and have some capacitive thread stitched into the index finger of the right glove and a bluetooth headset for sound. Add in Tasker to deal with automation and it makes the phone really easy to use.
This is the beastie:
CLICKY
Click to expand...
Click to collapse
The tight fit is a problem, to be ideal, it should be room for something like Otterbox defender or Ballistic-whatever-its-name-was. A drop in one of the pouches with bare phone is nearly as bad as a drop of the bare phone, and SIII doesn't take a lot of abuse on its own.
So looking for something with a bit more room, that still have decent opening to operate the screen.

I suspect you'll have problems finding anything that big, the S3 isn't a small handset to start with and by the time it's cased up it doubles the bulk.
Good luck :good:

If your looking for waterproof bag i have been using a type of waterproof ziplock for years. its called Aloksak. I have swam across rivers a few time and my gear in it is always dry.
Its certified waterproof to 60 metres and tested by the Navy Diving Unit.
I got mine through amazon and there are alot of sizes some even can fit a rifle. I have some that are really beat up scratches and stretch marks from sharp object and they are not even leaking.
Screen is 100% usable and its dirt cheap.

I am looking for a decent water proof case myself. I have ran across the drycase from drycase.com and have contacted them in an attempt to verify that the s3 will fit in the standard case without having to get the tablet sized one.
It does not offer drop protection however they say its rated to 100 feet (30 meters) so i should be able to take this on a 40 foot reef dive.
I really want to get rid of my camera housing as its for an old sony 5mp camera that barely works anymore.

Drycase
I just received my Drycase from Amazon. So far here are my thoughts on it with the S3. I have never owned a waterproof case like this before so perhaps some of these issues are common to cases like this. Keep in mind I have only had the case for a couple hours so these are just my initial impressions.
1. It is a little difficult to get the phone into and out of the case. It sticks to the plastic sides of the case.
2. Although the Drycase sales rep told me that the S3 would fit in the case and it does for the most part, it is hard to get it far enough into the case so that you can connect the headphone adapter and still have it be out of the way of the top black flap and closing mechanism.
3. Once the phone is in the case and the air is pumped out, the plastic sides of the case fit pretty tight to the body of the phone. This is nice as it makes the screen easy to see, however it also makes the volume and power buttons on the sides of the case difficult to press. I was trying to use the case to take underwater photos and video and because you can not use the touch screen when underwater I mapped the volume down button to the camera shutter, but it was difficult to press this button when the phone was in the case.
4. When the headphone/microphone jack inside the bag is connected to the phone any sound you record with a video will not be recorded since I assume the internal microphone is disconnected. So if you want sound with video you would need to either not plug in the internal cable or connect an external mic. Not a big deal for shooting underwater but if you are going to be moving between above and below water you may want to just leave this cable disconnected.

Anyone seen or tried this pouch?
http://www.ebay.com/itm/ws/eBayISAPI.dll?ViewItem&item=271017216379
I like that it has both an armband and lanyard.

komugi said:
I'm hoping Liquidpel will be available for this device. http://www.liquipel.com/
Basically they coat the entire phone + internals with hydrophobic material, that way even when water gets into the phone, it remains working.
Click to expand...
Click to collapse
That's super cool. If you look they do have it for the s3.
Sent from my SCH-I535 using xda app-developers app

unique77 said:
That's super cool. If you look they do have it for the s3.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
I've seen this before. Some people swear by it.

I have this
http://www.amazon.com/gp/product/B004QWY644/ref=oh_details_o04_s00_i00
and this
http://www.amazon.com/gp/product/B008D532ZO/ref=oh_details_o00_s00_i00
works great!!
I have been able to swim around in the pool, go underwater and still hear my music, can make calls too, need to keep the mic out of the water, otherwise they cant here you.
Also , FYI, when you are under water, you cant use the phone well, it just wont pick up your print.

I have decided to start surfing and never go anywhere unless I have my phone and headphones. I have been debating on ordering this. http://pages.ebay.com/link/?nav=item.view&id=350585644786 I think music might help with the frustration of learning.
Sent from my SPH-L710 using xda premium

crzy619 said:
I have decided to start surfing and never go anywhere unless I have my phone and headphones. I have been debating on ordering this. http://pages.ebay.com/link/?nav=item.view&id=350585644786 I think music might help with the frustration of learning.
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
yea, I got something like that, the H2O headphones are nice because they have a Mic on them, and the bag has compression clips on snapps, I love mine!

eatonjb said:
I have this
http://www.amazon.com/gp/product/B004QWY644/ref=oh_details_o04_s00_i00
and this
http://www.amazon.com/gp/product/B008D532ZO/ref=oh_details_o00_s00_i00
works great!!
I have been able to swim around in the pool, go underwater and still hear my music, can make calls too, need to keep the mic out of the water, otherwise they cant here you.
Also , FYI, when you are under water, you cant use the phone well, it just wont pick up your print.
Click to expand...
Click to collapse
How do you get the headphone line out of the OB pouch? The one with integrated headphone jack looks interesting. Maybe the Note-sized pouch is big enough for a S3 with a Ballistics case. Worth a try?

I forgot what its called but I seen a website that will take apart your phone and water proof the components so you don't have to have a waterproof case on. Just take the bare phone swimming with you n you're good
Sent from my SCH-I535 using Tapatalk 2
---------- Post added at 10:21 AM ---------- Previous post was at 10:21 AM ----------
I remember the starting price for it is like $60 or $70 tho
Sent from my SCH-I535 using Tapatalk 2

xXJay_RXx said:
I forgot what its called but I seen a website that will take apart your phone and water proof the components so you don't have to have a waterproof case on. Just take the bare phone swimming with you n you're good
Sent from my SCH-I535 using Tapatalk 2
---------- Post added at 10:21 AM ---------- Previous post was at 10:21 AM ----------
I remember the starting price for it is like $60 or $70 tho
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
I know where you saw it: a couple posts up in this thread..

scarrmrcc said:
I know where you saw it: a couple posts up in this thread..
Click to expand...
Click to collapse
Wow sorry lmao I thought it was a different thread. I guess I shouldn't be typing responses when I'm extremely tired -.-
Sent from my SCH-I535 using Tapatalk 2

Snuble said:
How do you get the headphone line out of the OB pouch? The one with integrated headphone jack looks interesting. Maybe the Note-sized pouch is big enough for a S3 with a Ballistics case. Worth a try?
Click to expand...
Click to collapse
THERE IS A wire on the inside that connects to the external one. I'musing it now
== Yea.. I tapped that!

An interesting dock replacement.

While looking around my place for a temporary alternative to a dock or bookcase with tilted viewing positions, (That my GF and I could use to watch a movie) I came across an interesting alternative.
The 3DS stand from the 3DS game "Kid Icarus: Uprising". I was timid at first due to its small size, but it's held up like a champ, even with heavy typing, web browsing, and writing thanks to little rubber nubs securing it in place. There's even a little cut out where the 3DS headphones would have gone allowing for an opening to the charging port. The only angle it offers is the typing position, but we placed it up on a binder and it offered that little extra tilt. It even folds up for portability, fitting easily into the pocket on the sleeve of my tablet. Win!
Now that I think about it, it's more of an alternative than a replacement. Anyways, just thought I'd share.

a pic of the stand without the tablet on it would be cool...

stuartv said:
a pic of the stand without the tablet on it would be cool...
Click to expand...
Click to collapse
Voila!

[Q] Camera Strap?

Ok, so I see that the phone has a camera strap eyelet at the bottom left (at least I hope that is what I am looking at). I rummaged through old camera straps I have and even the thinnest was too thick to fit into the eyelet.. even after trying to thread a pull through using sewing thread to pull it through....
Being as there are SOME situations I foresee wanting to take a picture using the phone but still wanting a way to secure it (pictures while on boats, in crowded areas holding above head, Disney trip etc.) Has anyone spotted a GOOD camera strap/lanyard that they recommend and have used? Obviously looking through ebay and amazon pop up quite a few but none that I could be certain fit through the eyelet nor that are good quality.

werds said:
Ok, so I see that the phone has a camera strap eyelet at the bottom left (at least I hope that is what I am looking at). I rummaged through old camera straps I have and even the thinnest was too thick to fit into the eyelet.. even after trying to thread a pull through using sewing thread to pull it through....
Being as there are SOME situations I foresee wanting to take a picture using the phone but still wanting a way to secure it (pictures while on boats, in crowded areas holding above head, Disney trip etc.) Has anyone spotted a GOOD camera strap/lanyard that they recommend and have used? Obviously looking through ebay and amazon pop up quite a few but none that I could be certain fit through the eyelet nor that are good quality.
Click to expand...
Click to collapse
I'm not sure where you are located, but I found a lanyard for a USB thumb drive at Staples (or possibly Office Depot) in the US for something like $2. Small enough to thread through the slot, and for $2 won't break the bank.

FranzDages said:
I'm not sure where you are located, but I found a lanyard for a USB thumb drive at Staples (or possibly Office Depot) in the US for something like $2. Small enough to thread through the slot, and for $2 won't break the bank.
Click to expand...
Click to collapse
Hmmm that sounds like a cool idea! And fortunately for me we still do have a Staples in town lol

I'm not convinced that a strap is the best use for that hole... surely any strap you manage to get in there will be so thin as to offer little in the way of strength to be trusted for something as heavy as a phone. I always assumed it was for the Japanese trend of dangling a million toys and charms off the phone as opposed to dangling your phone off your wrist

Best camera wrist strap lanyard for Sony Xperia Z3 Compact is LIM'S
See LIMS limsdesign "dot" com and go to the Etc. section. It's good for the Z3C.
Enuf said!

werds said:
Ok, so I see that the phone has a camera strap eyelet at the bottom left (at least I hope that is what I am looking at). I rummaged through old camera straps I have and even the thinnest was too thick to fit into the eyelet.. even after trying to thread a pull through using sewing thread to pull it through....
Being as there are SOME situations I foresee wanting to take a picture using the phone but still wanting a way to secure it (pictures while on boats, in crowded areas holding above head, Disney trip etc.) Has anyone spotted a GOOD camera strap/lanyard that they recommend and have used? Obviously looking through ebay and amazon pop up quite a few but none that I could be certain fit through the eyelet nor that are good quality.
Click to expand...
Click to collapse
I managed to get my Sony point and shoot camera (TX200) strap through the eyelet, also using a cotton tread to pull it through, and the cord was just thick enough to to fit the gaps and provide a sturdy hold. Don't want the phone to slip out of hand when taking photos whilst snorkelling, I'm sure that sucker is going to be really slippery when under water, what with the glass front and back. It going to be a real test of how waterproof this phone is!

LondonMpee said:
I managed to get my Sony point and shoot camera (TX200) strap through the eyelet, also using a cotton tread to pull it through, and the cord was just thick enough to to fit the gaps and provide a sturdy hold. Don't want the phone to slip out of hand when taking photos whilst snorkelling, I'm sure that sucker is going to be really slippery when under water, what with the glass front and back. It going to be a real test of how waterproof this phone is!
Click to expand...
Click to collapse
I don't have it attached to my z3 compact, but I think it would be possible. I have a pentax floating camera strap attached to my panasonic TS5 (which is an awesome stand alone underwater camera). No idea where you would find one, any camera shop maybe? I'm in Canada and bought it at London Drugs. Ignore the caribiner, that was just for attaching the strap to my equipment.
EDIT: Tested it, took a bit of work but I was able to get the thread through the lanyard loop on the z3 compact. Floating strap might be good choice in water, even if it looks a little silly.