Related
I don't know what to do because my device is currently not booting. The device is stuck at the HTC logo for a very long time (both when booting normaly or going in to revovery). The device finaly is finished booting in like 10 min. , but when it is finnished booting the touch on the screen doesn't work, it keeps a black background and it says no service. In revovery on the otherhand the optical trackball doesn't work anymore, the hardware button does tho because the first option "Reboot system now" does work.
What should I Do???
Milioo said:
I don't know what to do because my device is currently not booting. The device is stuck at the HTC logo for a very long time (both when booting normaly or going in to revovery). The device finaly is finished booting in like 10 min. , but when it is finnished booting the touch on the screen doesn't work, it keeps a black background and it says no service. In revovery on the otherhand the optical trackball doesn't work anymore, the hardware button does tho because the first option "Reboot system now" does work.
What should I Do???
Click to expand...
Click to collapse
Have you tried using the volume up / down buttons for moving around the menus and power button for select in recovery?
sbdags said:
Have you tried using the volume up / down buttons for moving around the menus and power button for select in recovery?
Click to expand...
Click to collapse
The volume up/down buttons dont work in recovery
Now its just stuck in a bootloop .
And there is no way of wiping the device, because the trackball isn't working.
hep would be greatly appreciated
The first thing I would try is to remove the SD card and see if your phone boots.
If that doesn't work. Have you tried putting fake flash on your SD and booting into recovery on that to test your trackpad?
Why has it started playing up in the first place? Did you have a bad flash? A wee bit of the history of your device might help to find out what's going on.
socktug said:
The first thing I would try is to remove the SD card and see if your phone boots.
If that doesn't work. Have you tried putting fake flash on your SD and booting into recovery on that to test your trackpad?
Why has it started playing up in the first place? Did you have a bad flash? A wee bit of the history of your device might help to find out what's going on.
Click to expand...
Click to collapse
the trackball isn't working in the fakeflash. The whole problem didn't happen after a bad flash, but it just went in a bootloop when i tried to put it on this morning. I was running Defrost 1.4
You don't need trackball in the fakeflash. You navigate there using volume up and down. It should work. Try .
How about resetting it by doing the following.
Switch it off, or remove battery > Hold volume down and power button > wait a few seconds > use volume to go to clear storage > power button to select. This doesn't involve going into recovery so your buttons might work there.
Can't you get into the bootloader mode with vol. down + power and wipe it there?
Edit: Few secs too late heh
Sareas said:
You don't need trackball in the fakeflash. You navigate there using volume up and down. It should work. Try .
Click to expand...
Click to collapse
You need the trackpad to select the option after choosing it with volume up/down.
socktug said:
How about resetting it by doing the following.
Switch it off, or remove battery > Hold volume down and power button > wait a few seconds > use volume to go to clear storage > power button to select. This doesn't involve going into recovery so your buttons might work there.
Click to expand...
Click to collapse
No, it says clear...... and then it just restarts the bootloop
The fake-flash worked!!!!!!!
I deleted everthing there but now, when I boot up the device it boot up straight into fastboot
You could try now using an ruu to flash. Or try getting into recovery and see if you can use the buttons now.
I'll try a ruu, but the recovery still wont work
socktug said:
You could try now using an ruu to flash. Or try getting into recovery and see if you can use the buttons now.
Click to expand...
Click to collapse
The Ruu doesn't boot past the quietly brilliant signiture.
Now the official RUU is doing a bootloop...
Warning: you triple posted
dario3040 said:
Warning: you triple posted
Click to expand...
Click to collapse
Not the greatest most useful first post I've seen.
Im having the same issue. Phone locked up pulled the battery and phone stuck on HTC boot logo. Can get into recovery but no buttons are working so i cant recover. That actually happened before but i could get it sorted by flashing using rom manager as i could boot the rom.... Where can you get fake flash?
theloother said:
Im having the same issue. Phone locked up pulled the battery and phone stuck on HTC boot logo. Can get into recovery but no buttons are working so i cant recover. That actually happened before but i could get it sorted by flashing using rom manager as i could boot the rom.... Where can you get fake flash?
Click to expand...
Click to collapse
http://www.mediafire.com/?i2cy2p04tjbizn0
version I currently have, maybe not the newest (0.14), but works just fine.
So, after trying out a few firmwares (JM2, JG8, JM5) and kernels (Samset&OC) I can't no longer boot to recovery with Vol UP + Home + power. I can't really say when this problem first occurred, but maybe with JG8 flash. The strange thing is that I can get to recovery with adb reboot recovery and through android console with reboot recovery (when rooted ofc). Also download mode works great.
Things I have tried:
-flash again to JM2 and JM5 with re-partition checked (512 PIT)
-cleared cache+data through recovery
-factory reset through phone code (this also cleared the internal SD)
-took out the battery multiple times
-booted phone without sim
-flashed phone without sim
-changed CSC with phone code
-restore a nandroid backup of JM2. Recovery worked with this one when I took the backup
-there's no external flash card inserted
Soooo..does anyone have any idea about this kind of problem?
i had a similar problem after trying few ROMs. In my case, when i pres the key combi i get the boot logo and then few seconds later the screen goes black and then i see the boot logo again, and this goes forever. and then i tried pressing the same key combination simultaneously and once i see the boot logo i let go the power button and keep the vol up and home pressed, and then only it went into the recovery mode.
hope it works the same for you
Cheers
Agreed, 99.9% chance you are doing it wrong.
Sent from my GT-I9000 using XDA App
mmthabet: I had the exact same experience. Letting go of the power button when the logo appears lets me enter recovery.
or you may need to take out the battery first for a few seconds... after that, you can reinsert it back and try recovery mode...
at least this work for me...
Thanks for replies but none of the solutions work. The recovery mode button combination DID work for a few weeks, but then just stopped working.
I know that I'm doing it right. I have always pressed vol up and home down until the phone loaded recovery and only briefly pressed power button just at the start. I have also tried to remove battery multiple times and once waited 30 mins before re-inserting it.
Trust me, I'm not doing it wrong :s And recovery is working great through adb reboot recovery and shell.
Darkstriker said:
Agreed, 99.9% chance you are doing it wrong.
Click to expand...
Click to collapse
More so a timing issue. Buttons not pressed at the same time.
I get it all the time for all combo's.
Just keep trying.
You might already have this however just in case you dont, check out Quick Boot.
http://www.appbrain.com/app/com.siriusapplications.quickboot
With this app you can boot into recovery mode. Have to be rooted though.
odyssey61 said:
You might already have this however just in case you dont, check out Quick Boot.
http://www.appbrain.com/app/com.siriusapplications.quickboot
With this app you can boot into recovery mode. Have to be rooted though.
Click to expand...
Click to collapse
this wont work, if you bricked the phone in a bad flash situation.
in times when this app works, you can easily do adb reboot recover
so this app still doesn't address the real issue of how to get the 3 buttons press hardware recovery mode
Laum said:
I know that I'm doing it right. I have always pressed vol up and home down until the phone loaded recovery and only briefly pressed power button just at the start.
Click to expand...
Click to collapse
I release the buttons right when the first Samsung texts comes on the screen. It will take it to Recovery mode. I also had a "boot loop" few times, if I keep pressing the buttons all the time.
Have you tried release your fingers right in the first texts? I really don`t know what is exactly the right way to press the buttons, but this always have took it to Recovery.
Looks like my latest full wipe with *2767*3855# cured it. Flashed JM5-->full wipe-->samset1.9b-->samset kernel and now it works. It must've got stuck somehow in my previous JM5 installation.
I cant get into the download- or recovery-mode by using these keys... so i am not able to flash a new firmware! can anybody help me please? is there a chance to get into the download mode by using an adb-command?
please help i just cant get into the download mode!
Igor02 said:
I cant get into the download- or recovery-mode by using these keys... so i am not able to flash a new firmware! can anybody help me please? is there a chance to get into the download mode by using an adb-command?
please help i just cant get into the download mode!
Click to expand...
Click to collapse
yes
adb reboot download
but it is dangerous, as you can not recover from a bricked state, if your flash is not compatible or if something went wrong with odin, etc.
I you're bricked and can't get into Download or recovery mode, leave the device to boot, it will just show a black screen for a while then will turn its self off, once this happens you should be able to use the key combo.
arch3rm said:
I you're bricked and can't get into Download or recovery mode, leave the device to boot, it will just show a black screen for a while then will turn its self off, once this happens you should be able to use the key combo.
Click to expand...
Click to collapse
AHHHHHHHHH OMG, WHY DIDN'T YOU SAY THIS SOONER, like 5 hours ago...
i could have tried that, and not had to send my phone back for "repair"
well i'm sure i'll see that screen again in the future, i'll try that next time
AllGamer said:
AHHHHHHHHH OMG, WHY DIDN'T YOU SAY THIS SOONER, like 5 hours ago...
i could have tried that, and not had to send my phone back for "repair"
well i'm sure i'll see that screen again in the future, i'll try that next time
Click to expand...
Click to collapse
Well I did just get the phone 2 days ago,
Had that problem the same day, discovered the fix two hrs of horror later
Same Problem here i contact samsung here in mexico and a technical aggent tell me if we make a repair our phones we need a jtag and this is so bad alllready contact many people jtag manufacturers in china and honkong trow alibaba.com and no luck don't have other source i try is contact to nspro and z3x and no support for this repairand only hope still have is a reply from the people in the forum SMTi Jtag Repair Tool
Its hard to me go to UK Samsung Service Center i'm in mexico like i said
and i'm waith for a solve this i;m so very sad
http://www.youtube.com/watch?v=g8AIvalzBvY
Darkstriker said:
Agreed, 99.9% chance you are doing it wrong.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
I usually release the power button on the boot screen first and then the other two buttons
arch3rm said:
I you're bricked and can't get into Download or recovery mode, leave the device to boot, it will just show a black screen for a while then will turn its self off, once this happens you should be able to use the key combo.
Click to expand...
Click to collapse
Any idea how long you waited? Been waiting 5 minutes, hasn't shut off. Mine's a Bell though so I'm guessing I won't have any luck.
The way i do it (no chance of doing it wrong and timing):
hold down+home and then also press the power button for a little more then 10 seconds (so all 3 buttons for 10 seconds). The phone will reset into download mode, never fails in whatever mode the phone originaly was..
I rooted my slide months ago and have been installing new roms regularly using Rom manager and manually by booting into recovery.
I just downloaded and installed cyanogens new 6.1.1 release and when I booted the phone I get the usual request for me to allow Google's locations services and I click ok. Then I get touch the android to begin screen and when I touch the android, nothing happens. I did this over and over. just stuck.
So I just figured I would restore my back up via nandroid... I tried to reboot into recovery and pressed Vol down and pwr. I am only getting the choices of
Fastboot
Recovery
Clear Storage
Simlock
I select recovery and I get a triangle with an exclamation point.
And now I am stuck What happened?? More importantly, What do I do to fix this??
Please help ASAP I am very nervous!!
When you go into recovery, aren't you supposed to then hit Vol Up and Power and then wait a bit?
When I prees up then power it just boots into the "touch android to begin " screen that does not work
karose465 said:
When I prees up then power it just boots into the "touch android to begin " screen that does not work
Click to expand...
Click to collapse
when you get the exclamation triangle you press vol up + power and then select apply update.zip, then you can restore your nandroid... your only problem here seems to be a bad flash, just wipe and reflash cm6 or restore the nandroid... obviously you are doing something wrong when trying to go into clockwork recovery so dont panic and do it as you did when you flashed the rom man
God Bless you. It's Fixed and restored!!!!! Thanks a ton!!!!
karose465 said:
When I prees up then power it just boots into the "touch android to begin " screen that does not work
Click to expand...
Click to collapse
Sorry, should have specified where to press those at, but glad it's working for you now.
karose465 said:
God Bless you. It's Fixed and restored!!!!! Thanks a ton!!!!
Click to expand...
Click to collapse
you are welcome my friend
I have to firstly say I am a complete noob, infact, the Defy is my first smartphone.
So far i have......
Rooted Phone
Performed a nandroid backup
Installed 2nd init
Installed CM7
Everything was going so well until i noticed there were no google apps. I installed gapps zip file after re installing recover (to install the zip file from boot menu). Ever since then, my phone wont make it past the red Motorola logo. I cant even get back into the boot menu?
Please Help
If you have 2nd Init installed , press Vol Down whenthe blue LED blinks during startup.
If that fails, hold the Vol Down button and then power on your cell, you'll enter default recovery. Clear cache/data and start again.
Also, if you are using CM7 RC1 or above, there should be no need to install gapps.zip separately.
Thanks for the reply mate.
Phone wont get to blue light before freeze. RE the vol down power on menu, all i get is an android dude with a triangle with an Exclamation point in it?
sorry i should have written this in my first reply, when you see the exclamation point, press Vol Up + vol down TOGETHER, and you'll see the recovery menu.
JimmyMagic said:
Thanks for the reply mate.
Phone wont get to blue light before freeze. RE the vol down power on menu, all i get is an android dude with a triangle with an Exclamation point in it?
Click to expand...
Click to collapse
at this point press vol up and down at the same time..and wipe
The only options i get on there are.....
Reboot system now
Apply sdcard:update.zip
Wipe data/factory reset
Wipe cache partition.
Tried them all and no luck
try this one
http://forum.xda-developers.com/showthread.php?t=1147967
in the 4th post, you can try that and flash it again
Never ending problems mate. Cant get RSD lite to work.
Keep getting.....
"failed flashing process. Failed flashing process. unable to retrieve initialization values from INI file"
Running as administrator and have tried 2 different SFB files.
Im giving up all hope, been reading forums all day and my eyes are starting to hurt.
bikerabhinav said:
If you have 2nd Init installed , press Vol Down whenthe blue LED blinks during startup.
If that fails, hold the Vol Down button and then power on your cell, you'll enter default recovery. Clear cache/data and start again.
Also, if you are using CM7 RC1 or above, there should be no need to install gapps.zip separately.
Click to expand...
Click to collapse
I installed CM7 RC1 and market etc werent there.
Don't give up hope yet, people have recovered their Defy from even worse conditions. All this could be an outcome of a chain of mistakes so lets stat from scratch.
1. Is your battery charged? Does it show charging LED when plugged in wall charger while turned OFF ?
2. Which OS do you have? also 64bit or 32?
3. Which Motorola Driver and RSDLite version do you have?
4. Where did you download the SBF files from? paste the link to that thread.
5. How are you flashing the SBF? (what steps do you take)
Also, try this:
Pull out the battery, Hold Defy in your one hand and press Vol Up+Down+Power button all together. Now, quickly insert the battery with the other hand keeping those buttons pressed and you will be taken to stock recovery.
Only Wipe data and wipe cache, do not install update.zip or anything else.
Once done restart the cell and let us know what happens.
JimmyMagic said:
Never ending problems mate. Cant get RSD lite to work.
Keep getting.....
"failed flashing process. Failed flashing process. unable to retrieve initialization values from INI file"
Running as administrator and have tried 2 different SFB files.
Im giving up all hope, been reading forums all day and my eyes are starting to hurt.
Click to expand...
Click to collapse
thats a common problem related to the version of RSDlite..
use 5.3.1 and try to flash again..
All the best
Got it sorted at last. Just needed RSD Lite 4.9.
Still had issues after, but managed to sort em out by installing CM7 then Gapps, rebooting then factory resetting data and cache.
A long struggle, but got there in the end.
Many thanks to everyone who helped me out, I am so grateful.
can u tell me which SBF u used that worked? any link ?
rangapsr said:
can u tell me which SBF u used that worked? any link ?
Click to expand...
Click to collapse
Use 3.4.2 177-005 Nordic http://forum.xda-developers.com/showthread.php?t=1037076
http://forum.xda-developers.com/showthread.php?t=1093352 this helped me...
I'm currently trying to downgrade my Acer a100 to hc 3.2 from the glitched up version of ics 4.0. I found several threads with a link to the download but the link appears to be dead. When I try to download it appears to try to fetch it but ends as download unsuccessfully. Does anyone have an answer for this? Thanks.
jdtablet said:
I'm currently trying to downgrade my Acer a100 to hc 3.2 from the glitched up version of ics 4.0. I found several threads with a link to the download but the link appears to be dead. When I try to download it appears to try to fetch it but ends as download unsuccessfully. Does anyone have an answer for this? Thanks.
Click to expand...
Click to collapse
Have you tried just doing a factory reset on the ICS your on to see if it clears anything up?
If you need it, Here<< is the post I used to downgrade to 3.2.1, keep in mind that you will most likely need to factory reset after the tablet reboots. It might hang on the android logo. Just power down then follow the hard reset from the recovery to get it to go.
Yes. I tried the factory reset but it still hangs up when using apps, browser, email, etc. Constant hang ups. Btw, I got the from downloaded but now it will not extract. Any ideas? I've tried win zip, unrar, and archidroid to no avail.
jdtablet said:
Yes. I tried the factory reset but it still hangs up when using apps, browser, email, etc. Constant hang ups. Btw, I got the from downloaded but now it will not extract. Any ideas? I've tried win zip, unrar, and archidroid to no avail.
Click to expand...
Click to collapse
You don't extract it. You need to rename it "update.zip" (make sure not to rename it "update.zip.zip"). Place it on the root of a freshly formatted microSD card. Then put it in the powered down tablet. Press and hold simultaneously the power button, and the volume down rocker (the one closest to the corner), until the tab vibrates. Then release, and you will see the it finding and installing the update file. After it restarts, if it hangs on the android logo (give it 5-10 minutes), perform the factory reset.
Gotcha, so there is noway to load it using the native memory or internal memory on the device? Or would that be a no-no anyways in the case it crashes during loading lol?
Thanks in advance!
Sent from my A100 using xda app-developers app
jdtablet said:
Gotcha, so there is noway to load it using the native memory or internal memory on the device? Or would that be a no-no anyways in the case it crashes during loading lol?
Thanks in advance!
Sent from my A100 using xda app-developers app
Click to expand...
Click to collapse
You never want to flash from internal memory, if something goes wrong you'll lose the file in the middle flashing right after your stuff is formatted. It may or may not format /data but if it does all of it, there goes internal SD.
Update.zip method is run from external SD I don't think it even checks internal SD when looking.
Tapatalked from my Galaxy S II.
Ok. I see. But I'm still a little confused. I've finally got the file downloaded and placed on the sd card. Which I might add was ridiculous as apparently it can't be placed on there manually without placing the file on a pc and loading it that way. Nonetheless, how exactly do I flash it now. I have it named update.zip.
Sorry for the confused remarks and questions. I'm use to Windows and have little experience with Linux based platforms. It seems as if Acer intentionally locked a lot of features on the a100 such as host usb ports, movable file systems, etc. Unless I'm dreaming here lol. Either way I like the tablet for the price.
Thanks.
jdtablet said:
Ok. I see. But I'm still a little confused. I've finally got the file downloaded and placed on the sd card. Which I might add was ridiculous as apparently it can't be placed on there manually without placing the file on a pc and loading it that way. Nonetheless, how exactly do I flash it now. I have it named update.zip.
Sorry for the confused remarks and questions. I'm use to Windows and have little experience with Linux based platforms. It seems as if Acer intentionally locked a lot of features on the a100 such as host usb ports, movable file systems, etc. Unless I'm dreaming here lol. Either way I like the tablet for the price.
Thanks.
Click to expand...
Click to collapse
Power off the tablet
Hold volume down, closest to the lock switch
Press and hold power
Let go when it says starting recovery kernel or update.zip in the upper left corner
When its done restart then hard reset
Hold volume up
Press power
Move the lock switch to lock and back a few times until it says resetting or whatever it says I forgot lol sorry
Restart tablet
Yeah Acer locked the boot loader which limits what we can do and how.
Tapatalked from my A100 - Aoikaze Alpha 3
Romman0 said:
Have you tried just doing a factory reset on the ICS your on to see if it clears anything up?
If you need it, Here<< is the post I used to downgrade to 3.2.1, keep in mind that you will most likely need to factory reset after the tablet reboots. It might hang on the android logo. Just power down then follow the hard reset from the recovery to get it to go.
Click to expand...
Click to collapse
Omg, thank you so much for posting the links to get the HC 3.2 stock ROM! You are a lifesaver. I had issues after an update where the wifi on this tablet wouldn't connect to any router. I had almost given up until I found your post. Now I have ICS 4.0.3 on this thing!!!
I also have the same problem no one can answer.
OK. Finally got it... I think. Here's what I had to do. Because the rom download kept faulting out randomly on download, I ended up using my laptop to download a program called download accelerator plus (dap) from old version.com. I then used its download manager to complete the download. I know... crazy, but it did the trick. The rest was per the directions given by other users on xda.
jdtablet said:
OK. Finally got it... I think. Here's what I had to do. Because the rom download kept faulting out randomly on download, I ended up using my laptop to download a program called download accelerator plus (dap) from old version.com. I then used its download manager to complete the download. I know... crazy, but it did the trick. The rest was per the directions given by other users on xda.
Click to expand...
Click to collapse
Crystal downloader is the same idea but for Android, check it out I use it ans get 3mb/s on my wifi.
Sent from my SGH-T989 using Tapatalk 2
Re up?
Hey, really sorry to post in a dead thread, but I can't find a working download link for 3.2 anywhere; it appears that the site is down. You guys seem to have downloaded it successfully though, so I was wondering if maybe one of you could put it on rapidshare or something? I very much need it, and I would appreciate a working download link. Thanks.
Itaer said:
Hey, really sorry to post in a dead thread, but I can't find a working download link for 3.2 anywhere; it appears that the site is down. You guys seem to have downloaded it successfully though, so I was wondering if maybe one of you could put it on rapidshare or something? I very much need it, and I would appreciate a working download link. Thanks.
Click to expand...
Click to collapse
http://ftp.bauernfeindiii.com/Misc_Shared/A100/update.zip
This one is 3.2.1. Remember if you are gong from 4.0 to 3.2, after the update goes through and it reboots, it might hang on the android logo. You need to factory reset to get it back.
1. Place the rotation lock switch in the up position
2. Press and hold the Volume down button, which is located farthest from the rotation lock
3. With the Volume down button held, press and hold the Power button for 3 seconds then release it. Continue holding the Volume down button.
4. Once the tablet vibrates, switch the rotation lock on and off repeatedly while still holding the Volume down button.
5. Release the Volume down button and stop switching the rotation lock once the "Erasing Userdata..." message appears in the upper left corner of the screen
6. Once the factory reset has been completed your tablet will load to the Welcome screen.
7. Your Factory Data Reset has completed now follow the onscreen steps to setup your tablet.
Romman0 said:
http://ftp.bauernfeindiii.com/Misc_Shared/A100/update.zip
This one is 3.2.1. Remember if you are gong from 4.0 to 3.2, after the update goes through and it reboots, it might hang on the android logo. You need to factory reset to get it back.
1. Place the rotation lock switch in the up position
2. Press and hold the Volume down button, which is located farthest from the rotation lock
3. With the Volume down button held, press and hold the Power button for 3 seconds then release it. Continue holding the Volume down button.
4. Once the tablet vibrates, switch the rotation lock on and off repeatedly while still holding the Volume down button.
5. Release the Volume down button and stop switching the rotation lock once the "Erasing Userdata..." message appears in the upper left corner of the screen
6. Once the factory reset has been completed your tablet will load to the Welcome screen.
7. Your Factory Data Reset has completed now follow the onscreen steps to setup your tablet.
Click to expand...
Click to collapse
Thank you, good sir. Thank you so much.
Romman0 said:
http://ftp.bauernfeindiii.com/Misc_Shared/A100/update.zip
This one is 3.2.1. Remember if you are gong from 4.0 to 3.2, after the update goes through and it reboots, it might hang on the android logo. You need to factory reset to get it back.
1. Place the rotation lock switch in the up position
2. Press and hold the Volume down button, which is located farthest from the rotation lock
3. With the Volume down button held, press and hold the Power button for 3 seconds then release it. Continue holding the Volume down button.
4. Once the tablet vibrates, switch the rotation lock on and off repeatedly while still holding the Volume down button.
5. Release the Volume down button and stop switching the rotation lock once the "Erasing Userdata..." message appears in the upper left corner of the screen
6. Once the factory reset has been completed your tablet will load to the Welcome screen.
7. Your Factory Data Reset has completed now follow the onscreen steps to setup your tablet.
Click to expand...
Click to collapse
Will this procedure work with the stock 4.0.3 that comes with the locked bootloader?
ponjanek said:
Will this procedure work with the stock 4.0.3 with locked bootloader?
Click to expand...
Click to collapse
It will work on any ROM, its built into the boot process, so yeah, use it on anything installed it'll reset.
Edit: I was assuming you meant the reset thing, not the process of downgrading.
pio_masaki said:
It will work on any ROM, its built into the boot process, so yeah, use it on anything installed it'll reset.
Edit: I was assuming you meant the reset thing, not the process of downgrading.
Click to expand...
Click to collapse
Sorry, I should have been more clear. I DID mean the whole process. Have you or do you know of anyone that has tried this?
response from anyone would be appreciated....Thanks
is it possible to make a flashable honeycomb zip we can flash in cwm, without relockuing the bootloader because im bored and want something new
ponjanek said:
Sorry, I should have been more clear. I DID mean the whole process. Have you or do you know of anyone that has tried this?
response from anyone would be appreciated....Thanks
Click to expand...
Click to collapse
Np, here is a useful post,just what you need:
By Romann0