Develop Bugs

[Q] Clockworkmod Recovery system will not install/start

Hi!
i've got a big problem with my HTC Desire Device. I flashed Ginger Villain 0.6 (or so) some days/weeks ago and updated to 0.8 some days ago but forgot to wipe data&cache. Today I tried to start the clockworkmod recoverysystem to restore my nandroid backup from Ginger Villain 0.6 (because of a note stored in "note everything" which wasn't working anymore after the update to Ginger Villain 0.8.
When i try to start the recovery system, i only get a red exclamation picture. I did a factory reset and then ROM Manager was gone and I wasn't able to reinstall it through market. I managed to install ROM Manager trough a manually downloaded .apk file. When I start the ROM Manager and install the Recovery system, everything goes fine but (i choose my device, get the message that ROM Manager where granted root priviliges) but when i try again to start into the recovery system i get the red exclamation mark again. I also tried to run unrevoked3 again, it pushes the recovery system and then it says that it cant get root (firmware too new?) anyway i have root privileges, it seems that error message doesn't matter.
any advice?
thank you

do you have s-off, you could try reflashing the clockworkmod recovery from fastboot
someone else reported clockworkmod just randomly dissapeering and it was the same rom too :/
hope theres not a bug
if you dont have s-off then the only thing i think you can do is reinstall an RUU, Re-root it and then restore the nandroid

Thanks for your reply. Whats s-off? How do i reflash the ruu? With the original exe from htc website?

just realised something, you mention rom manager quite alot
have you tried accessing recovery via hboot?
voldown+power then select recovery via volume rocker and select with power button.
what version of hboot are you on? did you use unrevoked to root the device or an older method?

Yes i tried accessing recovery via hboot, its v 0.80 i think. I rooted my device with an older method than unrevoked, but i dont remember how

I verified my hboot version: 0.80

ahh ok this makes sense now
you used fake flash to get to recovery
your latest rom does not like fake flash boot from rom manager ive seen this before)
so basically you need to do the following
download this file
http://dl.dropbox.com/u/5684959/stuff/recovery-clockwork-2.5.0.7-bravo.zip
rename it to update.zip
place it on the root of your sdcard
boot to recovery using voldown + power (then select recovery with vol down and press power)
when you get to the screen with the exclamation hold vol up and press power.
you will be greeted with the blue engineering recovery
select apply update.zip and it should take you to clockwork mod where you can restor/backup what you need
you problem is that rom manager doesnt like the new build and because youve not used the original root method for so long you have forgotten
you can find someone with the same problem here
http://androidforums.com/desire-all-things-root/253957-rom-manager-problems.html

any luck!!!!

Hi! That sounds very good but i haven't had time yet to try these steps, i'll report back soon.

need Recovery for HBoot 93 SLCD

Hi,
I have a TELUS HTC Desire that was already rooted when I got it.
It has HBOOT 0.93
I didn't know that my phone was SLCD so when I used ROM Manager to flash recovery, it messed up my recovery.
If I go into hboot, and press down arrow to boot into recovery, I get the black screen with the little phone and the red triangle with the exclamation mark.
I was desperate enough to try the ClockworkMod Recovery for the HBOOT 0.83 (ClockworkMod Recovery v2.5.0.1 SLCD)
from hxxp://forum.xda-developers.com/showthread.php?t=748618
flashed that on with UnrEVOked but didn't work. Recovery is still messed up.
I googled and searched for a week to find something for HBOOT 0.93 but I never find anything. Everything is for 82, 83 and 92. There are other people who asked about 0.93 in other threads but there are never answers to them.
Does anyone know of a proper ClockwordMod recovery img or ANY recovery img I can flash for my HBOOT 0.93
My phone is already android 2.2 but i would really like to flash to LeeDroid
Should I reflash my phone with the RUU to get rid of any dmg done? The only thing i'm afraid of is that my phone will be unrooted because of the RUU reflash and I can't find a way to root it.
If it's not possible to use UnrEVOked or Rom Manager to install LeeDroid because of HBOOT 0.93, I'm willing to manually do it.
But will the LeeDroid flash properly onto my phone if it's HBoot 0.93?
Does the flashboot thing when i boot into the HBOOT work for installing custom ROMS if I can't get into recovery? I noticed it will load images...but not sure exactly what the fastboot thing is suppose to do.
Thanks!!

HBOOT 0.93 is not the problem, neither is your SLCD. Use fastboot to flash your recovery, I suggest use either AmonRa 2.0.1 or CWM 2.5.1.8.
CWM from ROM Manager isn't the best recovery for your HBoot as I think it flashes 2.5.0.7 which is no good on your HBoot.
You can't flash a ROM from fastboot, you need recovery. Once you've done that, LeeDrOiD will work fine on your setup, but I would suggest you study up a lot more before proceeding, for one thing, it's easy to find a lot of info on HBoot 0.93 on this forum, secondly, get to know fastboot etc as you needs to know this for when things go wrong with cheat/easy methods like ROM Manager.
Take your time, be confident you know what you are doing it before you do it, you don't want to brick your phone.

Both of you need to know quite a bit more, but especially the OP...
But no he can of course not flash an unsigned recovery from fastboot without being s-off, and from the sound of the first post I'm confident he's not.
ghalalb is right though when he states that this has nothing to do with your bootloader version or slcd, and i really can't imagine how you can get the simple instructions on here wrong, but please simply use unrevoked via usb. It comes preloaded with a perfectly fine recovery for you, and also i believe you should really reconsider the decision to hack your phone with this little knowledge on the subject.
Also 2.5.0.7 vs 2.5.1.8 has nothing to do with hboot versions.. Both will work fine if flashed correctly, but the problem with just making rom manager flash the recovery is, that it is not quite up to date, so it does not actually flash anything. It just downloads an update.zip file, which loads the recovery when flashed. This fixed the problem of not being able to flash a custom recovery back before unrevoked came around. And to correct you on another thing you got wrong, yes you can actually flash a zip file containing something like a rom from fastboot if you are s-off. It will probably just not work exactly the same way, as the recoveries does.

That's interesting that you say hboot version and slcd has nothing to do with the ClockworkMod when other threads are very specific about which clockworkmod version you should use depending on your hboot and if your phone is slcd or not.
Also last time I did an update to the phone, it just used the fastboot. Didn't go into recovery.
I followed the exact instructions for unrevoked but an error occurrs when it tries to unroot...All I wanted to do was flash the recovery and not unroot the phone since it's already unrooted. So probably that's why it was having problems. But the recovery was still messed up after unrevoked did it's work.
I wonder if part of the problem is because I'm using a test image and not the actual production image for the phone. Which is probably another reason why the phone was already unrooted.
I'll try to reflash my phone using the RUU for a production image and try Unrevoked again just so everything is clean from the start

Trust me it doesn't matter. The only problem was on slcd phones back when they first came out, where cwm didn't contain the drivers for the new screen.
That is why it says it's for 0.83, as back then 0.83 was equal to slcd and all amoled models had come with 0.75 or 0.80. But now after the newer updates everyone is on 0.93 or so, and all newer cwm recoveries will work for both amoled and slcd. So no there is not a specific recovery for every bootloader, and there is no way a flash from rom manager messed your recovery up, as it never flashes anything.
And i think you might need to slow down and think about what you are doing? Because you talk about unrooting with unrevoked, and unrevoked will probably try to root your phone If you use unrevoked correctly you will have it working fine.
Also you say last time you updatet it, it used fastboot? updatet it officially? As then there is a reason you have the stock recovery. But try using the ruu and then go back to rooting using unrevoked or just keep it stock, as it might not be a good idea trying something without knowing what it does.
edit: and the screen you get with the phone in a triangle with an exclamation mark doesn't mean anything is wrong. It's just the stock htc recovery... If you press vol-up+power(or vol-down+power i don't remember) when you see this screen, you get a simple menu, which lets you flash update.zip and erase data.

mortenmhp said:
edit: and the screen you get with the phone in a triangle with an exclamation mark doesn't mean anything is wrong. It's just the stock htc recovery... If you press vol-up+power(or vol-down+power i don't remember) when you see this screen, you get a simple menu, which lets you flash update.zip and erase data.
Click to expand...
Click to collapse
Thanks for your response I thought that the triangle screen was bad since I tried the volume stuff and I couldn't get to the screen.
But if that's the stock htc recovery, then that means the clockworkmod recovery wasn't flashed properly?
I will try the keys again when i get to the recovery state later.
Actually I was having problems with UnrEVOked because my phone was ALREADY rooted. So it was trying to do something that was already done which is probably why it failed. I only needed unrevoked to flash the recovery...I didn't need it to do anything else but the recovery.
What I have on my phone right now is not the official load. It has test keys and crap in it....
Anyways, I'll see if I can get into the recovery menu properly before doing the RUU flash to have a clean start.

Ok Unrevoked should work fine anyway though. It just flashes a recovery and the su binary plus the superuser app. So if you are rooted it will just overwrite them. Your problem is far more likely to be a driver problem.
I rooted the old way as well(the one only allowing test keys signed roms) and then i used fake flash from rom manager until alpharev s-off came along, and now i just flash everything but roms from fastboot, it's far easier.

driver problem?
I followed the unrevoked instructions and my computer recognizes the phone while it's in bootloader
i can also adb shell into it when it's just normally powered on etc
oh and to answer previous question, yes i updated to 2.2 using fastboot
i put IMG99.zip onto my sdcard
powered on while holding the volume down for fastboot
it went and found the image on my sd card and grabbed it...and asked if I wanted to update...and viola...2.2
my phone was...2.0 or 2.1 when i first got it i think...i forgot what it was before 2.2
that's why i asked if anyone just stuck a custom rom into their SD card and tried using fastboot before....seems like everyone these days use things like rom manager, unrevoked etc >_<
I would think that the fastboot would find the zip file and can unzip and load it just like how it did the testkey one i did before....but i thought i would ask before i tried....maybe i should wait next week until i'm at home and have sd card readers in case anything goes wrong so i can recover the phone easier lol

There is a reason why people don't do that.. When you flash that way via fastboot, it only allow zip files signed by HTC, if you are s-on, and those write everything on the system to stock, which means you lose root and custom/modified recovery.
You could potentially do it that way if you were s-off, but the bootloader flashing utility does not allow as sophisticated commands as the custom recovery does, so everything in the original roms is actually packed in .img files for every partition.

All good advice.
I offered mine as my Desire would not accept CWM 2.5.0.7 (to this day it doesn't), and it would only accept CWM 2.5.1.8 or AmonRa 2.0.1. (as they work on PVT4 with a 40000 page) As for unrevoked, the only version that works for my Desire is 3.2.1, the latest (which I think is 3.3.2) doesn't work on my Desire.
It seems the longer these phones are around, the more individualised rooting and recovery has become, so advice should maybe always come with a word of caution.
***this is what worked for my device***
TinyAggie, I hope you are getting there!

Yep new page size will require the modified cwm for it, but it still has nothing to do with hboot version. However the other recoveries should flash ok as well, they just won't work well for installing roms(gave some error), which he hasn't come to yet

ghalalb said:
All good advice.
I offered mine as my Desire would not accept CWM 2.5.0.7 (to this day it doesn't), and it would only accept CWM 2.5.1.8 or AmonRa 2.0.1. (as they work on PVT4 with a 40000 page) As for unrevoked, the only version that works for my Desire is 3.2.1, the latest (which I think is 3.3.2) doesn't work on my Desire.
It seems the longer these phones are around, the more individualised rooting and recovery has become, so advice should maybe always come with a word of caution.
***this is what worked for my device***
TinyAggie, I hope you are getting there!
Click to expand...
Click to collapse
I found the same thing that only unrevoked 3.2 would work with my device.
I finally managed to flash the custom rom and is what i did to make it all work >_< Maybe it'll help someone else
I started with a fresh official load by flashing the RUU.
Then I used unrevoked that you can download from their website
I still got an error. CID missing. I go searching for it and it seems like a common enough error that the unrevoked team had addressed it
Because of the error, it was not able to unroot and flash recovery properly. The only thing it did was s-off.
So 2 ways to get root/recovery on your phone
1. Manually....find a PB99IMG.ZIP file that has root in it and flash that, then you can either use rom manager to flash the recovery or do it manually as well.
I created my own PB99IMG.zip with the recovery image of clockworkmod for desire using the android info .txt file I had in my other PB99IMG that contained the root access. Put the PB99IMG.zip into your SD card, go to Flash boot and let it do it's magic.
2. Easier way, get unrevoked 3.2 ... There was a warning for using it. Apparently you should only use the 3.2 version if you get the CID error.
But with unrevoked 3.2 it will give you superuser and the recovery image without you doing anything so it's easier.
So after I finally got Root, I backed up my sd card onto my comp.
Then I partitioned my SD card using ROM manager.
Once that was done, i flashed into recovery to do a backup.
After that I tried using ROM manager to flash leedroid...
it looked ok but it never managed to get past the splash screen after 20mins so I pulled the battery and rebooted
Same problem so I decided to flash manually.
Went into recovery and cleared everything then flashed the rom from SD.
Now I'm on leedroid
So far it looks exactly the same as the stock rom. It has everything I need so I'm happy.
I hope this helps anyone with similar problems.
Sometimes you just can't take the easy way out and have to do things manually

CDMA Desire: What version of Clockworkmod recovery

Hi all,
I'm sort of new to this. I've been using clockworkmod recover for a while now. Mostly to back up and restore. I want to try to load the stable CM7 rom or maybe some other rom that supports A2sd+ but I saw that at least CM7 recommends a newer version of ClockworkMod Recovery.
Right now I have 2.5.0.9. It's also the one that shows up in Rom Manager.
But I've seen here and other forums that people are now unto 3.0.0.5 and even beyond (I saw 3.0.2.4 on the CM forum)
So my question is what is the latest version of ClorkworkMod for the CDMA desire and how do I get it?
I saw an article on addictivetips.com that suggested renaming the new version to the name of the old one (2.5.0.9) and placing in in the Rom Manager folder on the SD and then flashing from Rom Manager thus fulling it into flashing a newer version.
Some, forums have guides on how to do that using adb and yet others have it as a zip file that can be flashed from the hboot.
Whats the best and I guest simplest way to get the new version.

Did you actually run into trouble with your current CWM trying to setup CM7?
The wiki states no problem using the version you currently have - 2.5.0.9.
If you do want to upgrade, you should follow this post.

foalsrock said:
If you do want to upgrade, you should follow this post.
Click to expand...
Click to collapse
Yep. thats exactly the forum I was referring to when I mentioned 3.0.2.4
Although I was not able to flash it using the PB99IMG.zip. Probably should ask there about that.
I did flash CM7 but,
here is what's weird: I tried the method where you fool the rom manager into flashing a newer recover outlined here.
Got the 3.0.2.4, but then when I went back into the Rom manager and hit reboot into recovery, it boots me into 2.5.0.9.
If I just press the power button, select reboot, and reboot into recovery I get 3.0.2.4. It's like I have two recovery images loaded.
I wiped the phone restored my nandroid backup of the stock rom I get 2.5.09.
Wipe again, as always everything data, cache, and dalvik. Load CM7 again. And the same thing two recoveries depending on how I reboot into it.

P.S.
1. Happy Passover, חג שמח.
2. forgot to say: if I power down and boot into Hboot with vol down + power and then go into recovery I get into 3.0.2.4

Do you happen to have your phone S-OFF?
If so, a simple solution might be to flash the 3.0.2.4 recovery .img file using "fastboot flash recovery xxx.img" @ hboot.
But you shouldn't S-OFF just for this as I'm not sure it'll actually resolve what you're experiencing.
It's a pretty odd situation and I think I better not give you advice which could potentially worsen it.
I'd seek help in the thread linked in the CM forums or hope that someone else might notice this post.
חג שמח! =)

foalsrock said:
Do you happen to have your phone S-OFF?
If so, a simple solution might be to flash the 3.0.2.4 recovery .img file using "fastboot flash recovery xxx.img" @ hboot.
Click to expand...
Click to collapse
I do have S-OFF, how would I flash this in Hboot?

Zhenya13 said:
I do have S-OFF, how would I flash this in Hboot?
Click to expand...
Click to collapse
This is assuming you have the Android SDK all set up on your computer (if not, read through the wiki).
Boot into the bootloader, type "fastboot devices". If you see your device listed - continue flashing by typing "fastboot flash recovery <filename>.img"

foalsrock said:
This is assuming you have the Android SDK all set up on your computer (if not, read through the wiki).
Boot into the bootloader, type "fastboot devices". If you see your device listed - continue flashing by typing "fastboot flash recovery <filename>.img"
Click to expand...
Click to collapse
Where should I put the img file? just to the root of the SD card?
תודה רבה

You should have the recovery .img file on your pc when flashing via fastboot

[Q] CWM Recovery 2.5.0.7 and 4.0.1.4

Hello to everyone
Today I S-offed my Desire with Revolutionary. It worked fine so far.
But I have some questions about the CWM Recovery.
I use to to nandroid-BUs with Rom Manager...well, the only reason is, I can choose a "title" of the BU instead of having that date-phrase.
After using Revolutionary I flashed cwm 4.0.1.4 with fastboot and that cmd-command from this post: http://forum.xda-developers.com/showthread.php?t=1122694
So far so good...if I start the cwm manually (with Vol- and Power pushed) cwm 4.0.1.4 starts (nice blue theme btw). If I choose the option to boot recovery within Rom Manager, I get into 2.5.0.7! Btw...Rom Manager also says, 2.5.0.7 is installed - so where is the 4.0.1.4-Version? I was looking at the cwm-Website, and when I choose Desire I only can download 2.5.0.7 either!
Could I get problems having somehow both version on my Desire? For example when I make a BU with Rom Manager (2.5.0.7) and recover it with manual Recovery (4.0.1.4)?
Well, the question is, why now both versions are available on my desire?! Should I better go back to 2.5.0.7? If so - how can I go back? Using the same way like flashing 4.0.1.4 with fastboot?
Sorry for these noob-questions...but I really didn't found any other post with that...well, call it "cwm-recovery-combination"!
Thx to anyone that could answer / help me!
One more question ...Usually I flash Custom Rom Stock-Versions (for example: Insertcoin 1.1.1 Stock)...is it now possible to use also CM7-Version just because I have S-off now? Or do I need to make further changes?

[Q] Problem with CWM 5.0.2.0 stable installation.

Actually, I got no place to post my question. So, I thought of starting a new thread.
I have installed CyanogenMod 7 on my HTC buzz by downgrading its stock rom as it suffered a OTA update before. I guess you guys r well aware about the process.
During the downgrade, my phone got Revolutionary CWM 4.x.x.x by default. In fact, I have flashed CM7 using revolutionary.
Now, CM7 comes with ROM Manager built-in and I tried to install CWM 5.0.2.0 recovery right form the GUI. The update.zip was downloaded. I could update it manually form my recovery options.
But, it was not stable. Each time I boot into recovery, Revolutionary CWM shows up, instead of CWM 5.0.2.0. To use it again, I have update the package each and every time.
Is is quite normal? Or, I am missing something? Plz help with advice.:crying:

I did this via Rom manager. Not through Recovery.
YNWA

ChandanRoy said:
Actually, I got no place to post my question. So, I thought of starting a new thread.
I have installed CyanogenMod 7 on my HTC buzz by downgrading its stock rom as it suffered a OTA update before. I guess you guys r well aware about the process.
During the downgrade, my phone got Revolutionary CWM 4.x.x.x by default. In fact, I have flashed CM7 using revolutionary.
Now, CM7 comes with ROM Manager built-in and I tried to install CWM 5.0.2.0 recovery right form the GUI. The update.zip was downloaded. I could update it manually form my recovery options.
But, it was not stable. Each time I boot into recovery, Revolutionary CWM shows up, instead of CWM 5.0.2.0. To use it again, I have update the package each and every time.
Is is quite normal? Or, I am missing something? Plz help with advice.:crying:
Click to expand...
Click to collapse
Yes this is normal for ROM manager as using ROM manager is only giving you a temp recovery over your stock ( in your case revolutionary cwm ) to get the cwm 5.0.2.0 you want you need to get either a PC49IMG.zip version of the cwm and use the boot loader method, use ADB/Fast boot method or use the terminal emulator method.
Tutorials are all over the wildfire thread and so are the necessary files etc.
Sent from my Nexus 4

That what u have to flash is temporary.
For permanent recovery, copy the recovery onto your pc.
Turn on the willy in hboot mode, goto fastboot connect usb
Type fastboot flash recovery name.zip
here name is the name of recovery zip AS IT IS.