Hi Everyone,
XXIKA1. Does this firmware support Multitasking on Bada??
I've seen some videos on Youtube that show Multitasking with this firmware..
HERE'S THE VIDEO
Also does this allow for spoofing..(I've spoofed Asphalt free with which was not available anymore..) I have XXJK1 currently. And does this work in conjunction with Android. Than-Q.
XXJK1 and Android. Yes, you can use it, because I'm using that firmware too.
secretwhite said:
XXJK1 and Android. Yes, you can use it, because I'm using that firmware too.
Click to expand...
Click to collapse
I think you misunderstood me. I am already on XXJK1. I want to know If I can use XXIKA1 with android and will it allow for spoofing? and does it actually have Multi-taking for Bada Native apps. thanks.
Sorry. I saw "I" as "J". Look main tutorial thread's first post. If your firmware isn't there, post there your question. Maybe someone make a bootloader for your firmware.
Thanks for the suggestions but I havce other queries too..
The bootloader and firmware (considered as the rest of the files with apps_compressed.bin as the most important) are completely different things that should not be confused.
The FOTA is prepared for certain bootloaders while they may run with different apps_compressed.bin as long as there is right header in the apps. Additionally, you may try modifying apps when it doesn't have the right header.
mijoma said:
The bootloader and firmware (considered as the rest of the files with apps_compressed.bin as the most important) are completely different things that should not be confused.
The FOTA is prepared for certain bootloaders while they may run with different apps_compressed.bin as long as there is right header in the apps. Additionally, you may try modifying apps when it doesn't have the right header.
Click to expand...
Click to collapse
Thanks for the reply! But I am a little confused...as to what to do.
I just installed the 'bl_univ_boot_poc2.fota' before installing Android with XXJK1.
how to modify apps? Also do you knw whether this firmware (XIKA1) has bada multi-tasking? Or shall I just stick with XXJK1 (too good except multitasking.)
And apps-compreesed.bin is the preloaded apps right?
let me answer you questions
1.all bada firmwares from bada 1.0 support multitasking but for native apps only so XIKA1 is not that special
2.XIKA1 doesn't support sp**fing
3. booting Android needs three things
prepared fota (mijoma made it already) , apps_compressed.bin that support fota (if it doesn't support it there is a small exe mijoma made also to patch the file) , proper bootloader that is compatible with the fota (you can see all proper ones at mijoma's thread)
Important N.B : we don't flash modded bootloaders it bricks the phone
mylove90 said:
let me answer you questions
1.all bada firmwares from bada 1.0 support multitasking but for native apps only so XIKA1 is not that special
2.XIKA1 doesn't support sp**fing
3. booting Android needs three things
prepared fota (mijoma made it already) , apps_compressed.bin that support fota (if it doesn't support it there is a small exe mijoma made also to patch the file) , proper bootloader that is compatible with the fota (you can see all proper ones at mijoma's thread)
Important N.B : we don't flash modded bootloaders it bricks the phone
Click to expand...
Click to collapse
OK. too stupid of me. So I thought it was third-party bada apps multi-tasking..
OK stickin with XXJK1 the best firmw there is.
Related
A new day and a new headache made by me
Today's question is : is it possible to make a full fw from upgrade fw???
two days ago i ripped a non-full firmware from kies now i want to make it full
but i wanted to get confirmation from XDA-developers that this is possible
can i just add the missing files from prior fw to the new one and it will be a full one??
i am talking about a full 1.02 to complete a non-full 1.2
thanks in advance
ps: i don't have thanks today so no one get angry from me
i am no talking about boot files only
i am talking about the whole fw
for ex shppapp file from non-full doesn't have alot of files should i add them simply??
mylove90 said:
i am no talking about boot files only
i am talking about the whole fw
for ex shppapp file from non-full doesn't have alot of files should i add them simply??
Click to expand...
Click to collapse
Bootfiles can be added to non-full firmwares to make it a full firmware. I have tried that myself. But adding ShpApp to the non-full firmwares won't work. You will end up with the facebook, twitter, samsungapps, daily briefing and other default apps not working. If you really want the older ShpApp files, you may want to modify the non-full firmware's registry to include the apps present in the ShpApp file you want.
mylove90 said:
for ex shppapp file from non-full doesn't have alot of files should i add them simply??
Click to expand...
Click to collapse
You may dump all files from full and updated shppapp with powerfull TriX tool, replace are old files to new and combine new full shppapp with files from update.
Thanks to b.kubica and adfree. Link
i know trix and i use it
i was talking about doing what you Xenon but not sure if it will work
waiting for adfree or someone who tried this to confirm it
You just had to take full ShpApp.app from a full version.
Idem for boot files.
No need PFS file.
The files needed are: BOOTFILES, amss.bin, apps_compressed.bin, CSC_S8500_Open_Europe_Common_OXA_XXJL2.csc, FactoryFs_S8500_Open_Europe_Common.ffs, Rsrc_S8500_Open_Europe_Common.rc1, Rsrc2_S8500_Open_Euro_Common(Low).rc2, ShpAppHD.app (this one need to be replaced by ShpApp.app)
ok so i'll tell you what i understood
Boot files (from old fw)
amss.bin (new fw)
apps_compressed.bin (new fw)
Factoryfs.ffs (old fw as it is not present in new one)
ShpApp.app (old fw)
RSRC1.rc1 (new fw)
RSRC2.rc2 (new fw)
CSC.csc (new fw)
PFS.pfs (don't know and think it is not necessary at all but present in new fw)
Yes you are right.
But generaly FFS is present in update firmware.
Wich firmware are you talking about?
ok
if you noticed i am from Egypt so it is a middle east fw update from 1.02 to 1.2
its code name S8500JPKC1
the ffs is from the full fw
i tried what you said lasentenza and ended up with non-working facebook,twitter,youtube(makes the phone restart),samsung apps,sms app(makes the phone restart also)
i think the problem is not that simple
guys is ther any 1.2 region free firmware out ? if yes then please give me the link to download it
thanx in advance
what do you mean with "region free"???
i live in india and the 1.2 firmware is not avail here
what is the code of your firmware???
is your firmware belongs to Africa and middle east??
ok so i'll tell you what i understood
Boot files (from old fw)
amss.bin (new fw)
apps_compressed.bin (new fw)
Factoryfs.ffs (old fw as it is not present in new one)
ShpApp.app (old fw)
RSRC1.rc1 (new fw)
RSRC2.rc2 (new fw)
CSC.csc (new fw)
PFS.pfs (don't know and think it is not necessary at all but present in new fw)
Click to expand...
Click to collapse
Depend on your goal... as repair solution?
Factoryfs.ffs is mandatory if you erase with Multiloader the FFS... as it contain important Security folder with all Certs...
Sometimes Operator related Certs included... Yes, you could try other FFS from your Product Code. No guarantee that it work 100 % without sideeffects. As sometimes minor changes... Same for ShpApp.app. Older stuff can work, but have to be tested...
Maybe post please exact filenames. Sometimes same files are used in other Firmware Brandings...
Best Regards
What you need is a Indian CSC file. Just replace the CSC file in the firmware with the one I in an Indian 1.0.2 or 1.0 firmwares available at samfirmware.com. Like DDJI2 or DDJK1. Then in keypad type "*#5239870*#". Then choose pre-configuration. Then in the code box enter the following code: *#27236*# and then press done. Then choose INU which is for Indian region. NOTE: Remove sim card and memory card and backup all data before doing this. This procedure will reset whole phone.
Now you will get all default Indian sim card settings and other Indian settings.
mylove90 said:
i tried what you said lasentenza and ended up with non-working facebook,twitter,youtube(makes the phone restart),samsung apps,sms app(makes the phone restart also)
i think the problem is not that simple
Click to expand...
Click to collapse
It won't work it the update firmware does not contains FFS file.
You can't take one from other firmware I think
carbonbadu said:
i live in india and the 1.2 firmware is not avail here
Click to expand...
Click to collapse
Word on twitter today is that India is getting 1.2 by the end of next week.
throughtheblack said:
Word on twitter today is that India is getting 1.2 by the end of next week.
Click to expand...
Click to collapse
Was it posted by samsung apps or samsung bada on twitter?
astrotom said:
Was it posted by samsung apps or samsung bada on twitter?
Click to expand...
Click to collapse
Samsungbada
"The 1.2 upgrade in india. will be available in late April, You can use Kies to upgrade ur Wave by end of next week "
hi all
I have to questions about the firmware
first is : Is there any possibility to add a language to a Firmware ? (at least for reading)
second is : as you know the new bada firmwares does not allow to run spoofed apps now the questions, Is there any possibility to run spoofed applications in new bada firmware or can we make a spoofable firmware from non spoofable one?
With Specially Thanks to all
civil.scholar said:
hi all
I have to questions about the firmware
first is : Is there any possibility to add a language to a Firmware ? (at least for reading)
second is : as you know the new bada firmwares does not allow to run spoofed apps now the questions, Is there any possibility to run spoofed applications in new bada firmware or can we make a spoofable firmware from non spoofable one?
With Specially Thanks to all
Click to expand...
Click to collapse
If you ever had used the forum search, you would have found both answers to your questions.
... and your second question sucks, anyway.
xsycox said:
If you ever had used the forum search, you would have found both answers to your questions.
... and your second question sucks, anyway.
Click to expand...
Click to collapse
if you know any answer post it
if dont know so dont talk , anyway
Well for your first question I dont know the answer but for your second i know.
There may be a way u can make it spoofable by hackin some files but the better way is to download firmware that was released before November or any firmware that is pre hacked by some hackers to run spoof applications. well i personally dont suggest you to spoof games or any other application because i also dont do the same. The developers need some support.
lordfarhan40 said:
Well for your first question I dont know the answer but for your second i know.
There may be a way u can make it spoofable by hackin some files but the better way is to download firmware that was released before November or any firmware that is pre hacked by some hackers to run spoof applications. well i personally dont suggest you to spoof games or any other application because i also dont do the same. The developers need some support.
Click to expand...
Click to collapse
thanks i think both answers is negative but nothing is impossible
in our region there is just one firmware of bada 1.2 and its release after november so if we want to use bada 1.2 there is no way to use spoofed apps ( there is no older version of bada 1.2)
for yor advice tnx i know they need support but samsung apps dont let us to buy apps because the seller part dont start in our region so we have no way except spoof
Actually I never knew that you cant buy apps. so listen xxJID, xxJJA, xxJK1 firmwares were launched before November and are also bada 1.2
lordfarhan40 said:
Actually I never knew that you cant buy apps. so listen xxJID, xxJJA, xxJK1 firmwares were launched before November and are also bada 1.2
Click to expand...
Click to collapse
thank yes you right but they don't support Persian language
Hello guys, I'm a greenhand on XDA, English and Mobile-dev, so please forgive any of my stupid words if I do have said in the bellowing description.
Yesterday, I joined the Samsung Bada Developers' Day, and got an unpublished Bada phone, it's GT-S7250 (Wave M). The problem is , I found I don't know how to install apps on it .
At first, I tried the built-in app market client, but strangely, I can only found some test apps on it, I guess that 's because the app market server still can't recognize this phone type yet.
Then, I use Samsung Kies on my PC, wish I could send apps to my phone after downloading them with Kies, but unfortunately, still doesn't work, cause it always prompts that the device is not supported.
So, could anyone provides my any idea to bypass all these limitations ? Thanks.
PS: I have do some monitoring work on Kies, and seems that there no validation requests to the server, and thus I think there might be a configuration file on the local disk, containing the supported devices's info, and if we can find and hack it, perhaps we could bypass the limitation.
what display resolution does your device have?
maybe you could ask larioteo for a copy of his app, he has found a method to install one app without kies, but he's only developing in 800*480 resolution
Can you show us the FW code read by kies???
i want to see if i can get the FW you have right now
About hacking kies...i think your phone is HVGA device so you can't install apps that are in kies right now
Wait until larioteo is back from his work to see what we can do about it
maybe we take you as a tester because you know chinese and we don't have chinese localization
Best Regards
Lithophyses said:
what display resolution does your device have?
maybe you could ask larioteo for a copy of his app, he has found a method to install one app without kies, but he's only developing in 800*480 resolution
Click to expand...
Click to collapse
Thanks for your reply, as @mylove90 said, the screen is HVGA, 480x320.
I will dig into larioteo 's posts while waiting for his reply.
Acutally, I have found the downloaded app files on my PC, the path is
C:\Documents and Settings\Administrator\My Documents\Samsung\Kies\Download\Applications, under this folder, I have found the *.app files, together with the corresponding *.app.img file each. I guess these are the app files I need, but to my disappoint ,when I copy these files onto my phone, I can't install them, it prompts unknown file type.
mylove90 said:
Can you show us the FW code read by kies???
i want to see if i can get the FW you have right now
About hacking kies...i think your phone is HVGA device so you can't install apps that are in kies right now
Wait until larioteo is back from his work to see what we can do about it
maybe we take you as a tester because you know chinese and we don't have chinese localization
Best Regards
Click to expand...
Click to collapse
Hi, mylove90, thanks for your reply.
To be honest , I don't quite understand what do you mean by "FW code", this is the first time I met this abbreviation, I guess you mean the "FirmWare code", right ? If so , Kies shows the firmware version is : S7250XXKI8/S7250XAKI8(XXX) , Hope this is what we need to find.
As to become a tester, I have to say that I'm REALLY REALLY glad to do that, it's an great honor for me that I can do something for possibly all Bada users as my feedback to the community.
And I also had a look at larioteo's post about the voluntas browser, hope I can do somthing for it.
Thank you again,
Best Regards.
S7250XXKI8/S7250XAKI8(XXX)
Click to expand...
Click to collapse
Thank you for info.
Firmware seems from September... XXX seems Product Code...
About install Apps... as handset is "new" (different Resolution)...
But you could play with bada 2.0 SDK to install few examples...
Maybe be carefully, as it is an prototype and as I know no Firmware is leaked, to fix problems...
Best Regards
I found something, if i wanted to search "S7250XXKI8". There is http://www.badaforums.net/forums/bada2/bada-dev-day-2011-t4913.html discussion on badaforums about Wave M.
Oh Samsung is so evil
XXX is invalid product code for kies updates
you get XXX product code is you damaged your original one
they know that we already got kies firmwares for sure
Best Regards
Hello there i am see left
XXX is not invalid it is the "Default Code", the main product code for all devices, only test devices gets this code, it is the ultimative update everything code.
As i know it from slyfer my tool to watch their server XXX was always the first code that got an open europe firmware, than the others get an upadte like DBT, OXA OXB OXC OXD OXE OXG after that the providers pick another of that and make something liket his VIA DRE and so on.
For more infos you need only to ask.
Picture in 5 minuetes: (also with other codes that you believe me )
note: yes the server changed but not the codes
larioteo know the best, but probably you can't install any apps that already launched. I mean, you can't install the apps that downloaded with Kies. but you can install an app that under development via Bada SDK 2.0 or larioteo's method. I hope I didn't make things worse for you.
Root Cert method via BADA SDK
If you just want to install your own apps on your wave M, ask Laoriteo about the root cert method via BADA SDK.
Really appreciate all you guys very very much, thank you for you kindly replies to my first thread on XDA.
According to your opinions, seems that there isn't much I can do with this problem. Perhaps I can only wait for the publication of this phone type, maybe till that time I will be able to use the built-in Samsung app market client. Or perhaps some hackers may jailbreak Bada, so that we can directly install any apps.
Then, I will be aiming at Bada app development, because I really feel the lack of apps on Bada, especially under the condition that I can't install any apps on this phone now.
Thank you,everyone!
http://forum.xda-developers.com/showpost.php?p=17900523&postcount=166
Maybe you could try this...
Maybe you see then Firmware for your handset...
Maybe Apps...
Best Regards
Is it possible to port wave 3 inbuilt themes monkey and other flash themes to wave 1 & 2.
If these themes are from Samsung Apps - no. Because of encryption based on IMEI number.
If the theme isn't encrypted ([theme_name].smt, encrypted themes have added ".dcf") and you can find that file via sTune in AppEx -> Sys/User and extract it, then the theme should work on Wave and Wave II.
Vishal for using the bada 2.0 themes or flash themes you need to be on any of the beta versions. Then you can have any flash theme or bada 2.0 theme on your wave 1 or wave 2. Below is the tutorial how can you do that....
http://www.badahub.com/forum/viewtopic.php?f=19&t=8&sid=03d079ac267956f1e83d1c7347322dae
hello
Dear Tapan, Thanks for your prompt revert.
I am very much enjoying the bada 2.0 themes on my beta firmware.
I opened this thread to request if someone could extract the inbuilt themes of wave 8600. Flash monkey theme (shown in youtube).
...extract the inbuilt themes of wave 8600...
Click to expand...
Click to collapse
They are NOT inbuild... preinstalled or whats ever...
You can download them from store...
DIFFERENT protection... NOT same like apps... better protected.
Tough protection... but funny at all.
I know only 2 Themes in store...
Gorilla and Infinity... since months...
Infinity Trial should also be available for S8500/S8530 if not again removed...
Seems much harder to use Action Script (Flash) to design such themes...
Best Regards
I fail to understand why samsung is making things tough for bada users.
The only thing which i was able to get from samsung were themes as they are not able to provide basic apps which any other phone has.
Now, they have started blocking the themes also. we are at mercy of samsung until we sell our phones.
ı dont thınk so
Can any one provide me the link to Gorilla theme (Wave 3) for my wave 1.
Is it available in wave 3 store?
Is it available in wave 3 store?
Click to expand...
Click to collapse
Gorilla is in S8600 AND S7250 Store.
BOTH I can install on S8500.
Both are Fullscreen.
But I have no idea how to solve this AES128 thingie... aka .dcf Encryption...
For themes.
Apps is no problem.
You can enter S8600 store with S8500 easier then with S8530 yet. Solution is here:
http://forum.xda-developers.com/showpost.php?p=21623889&postcount=45
AT YOUR OWN RISK!
Strange is, all other Themes are leaked... why not Gorilla...
Best Regards
when you click on the gorilla theme... it says product not available in this store
it says product not available in this store
Click to expand...
Click to collapse
Yes, this is correct.
But I have not written you should try to enter this store.
Replace apps_compressed.bin...
I was only wondering, because someone upload somewhere paperman, rainblabla...
I had not realized, that they are from store...
Link forgotten, to lazy to search...
But I have never seen Gorilla.smt
Now the question is.
Why?
Why Paperman.smt leaked?
Again, all ways I have tried ended with Gorilla.smt.DCF
DCF is AES encryption...
It is useless to copy, as my IMEI is involved and you can't decrypt...
Only way is to fake your handset as S8600 or S7250 and install via Kies or store on handset...
If you find other way. Tell me.
Best Regards
Edit 1.
Added Link:
http://www.samsungapps.com/topApps/topAppsDetail.as?productId=G00002340884&listYN=Y
This is what we talking about? Correct?
And this is what you can install via provided Link... posted before by me.
Paperman theme was provided as an example in bada_Platform_Extension_1.0.0_426
It wasn't leaked from the store at all
Remember this ? : http://forum.xda-developers.com/showpost.php?p=19552617&postcount=31
It is your own post
Remember this too ? : http://forum.xda-developers.com/showpost.php?p=19084545&postcount=17
Thanks Trzebiat for admitting this
Best Regards
bada 2.0.. great
mylove90 said:
Paperman theme was provided as an example in bada_Platform_Extension_1.0.0_426
It wasn't leaked from the store at all
[...]
Thanks Trzebiat for admitting this
Best Regards
Click to expand...
Click to collapse
You're welcome
Paperman theme is available in Samsung Apps: http://www.samsungapps.com/topApps/topAppsDetail.as?productId=G00002340984
But version in the store has new icons. The version which I've exported in STD has the default ones. In bada Flash Extension library only flash samples from Paperman were provided. Without icons.
adfree said:
Yes, this is correct.
But I have not written you should try to enter this store.
Replace apps_compressed.bin...
I was only wondering, because someone upload somewhere paperman, rainblabla...
I had not realized, that they are from store...
Link forgotten, to lazy to search...
But I have never seen Gorilla.smt
Now the question is.
Why?
Why Paperman.smt leaked?
Again, all ways I have tried ended with Gorilla.smt.DCF
DCF is AES encryption...
It is useless to copy, as my IMEI is involved and you can't decrypt...
Only way is to fake your handset as S8600 or S7250 and install via Kies or store on handset...
If you find other way. Tell me.
Best Regards
Edit 1.
Added Link:
http://www.samsungapps.com/topApps/topAppsDetail.as?productId=G00002340884&listYN=Y
This is what we talking about? Correct?
And this is what you can install via provided Link... posted before by me.
Click to expand...
Click to collapse
Thanks for the link, yes it is the same one...
I am not able to decide whether or not to use this hack to enter the store.
Is it possible to extract all the pictures and files using the theme developer and build it from scratch for all bada 2.0 users?
Is it possible to extract all the pictures and files using the theme developer and build it from scratch for all bada 2.0 users?
Click to expand...
Click to collapse
Again.
Higher Security for Flash Themes.
I have NO way found to decrypt *.dcf themes...
Sorry.
http://forum.xda-developers.com/showthread.php?t=1345375
If you know how to catch smt files, then let me now.
Best Regards
adfree, not only for flash themes, for all. I think Samsung made higher security for themes in bada 2.0 because in 1.x themes had no protection
...not only for flash themes, for all.
Click to expand...
Click to collapse
DCF aka AES encryption is "joke" for apps and old themes...
Only new Flash themes are protected REALLY with AES128... on Samsung Server.
Btw...
I saw this today... over 12 MB Theme...
http://www.samsungapps.com/topApps/topAppsDetail.as?productId=G00003910548&listYN=Y
Maybe soon we need more space for Flash themes.
Best Regards
Update: Those who are facing issues with installation of flash themes using this method.
After deletion of the pre installed themes using stune or any other way except default theme. i am able to install the gorilla theme but as soon as the installation occurs in the phone, in kies, it shows error "faulty installation"
Now, installation part needs to be taken care. I hope it will be soon.
badaapps.ru as found how to desactivate .dcf files for the app (i don't now if it works for themes)
all is here in russian (thx google trad)
Can we add keyboard language on bada 1.2?
I know how to do that with bada 2, but not with 1.2.
?????
I don't have much experience with Bada 1.2, but check the RSRC1 file (and the language setting file in CSC, of course). You'll find everything you need in there. For RTL languages though, I don't know.
k8500 said:
I don't have much experience with Bada 1.2, but check the RSRC1 file (and the language setting file in CSC, of course). You'll find everything you need in there. For RTL languages though, I don't know.
Click to expand...
Click to collapse
thank you, but do you know what files i need to search for?
Maybe I am not uptodate...
But all Compression Algos or Uncompressed RC1/CSC Tricks only for bada 2 yet...
For bada 1.x no way known to modify RC1 nor CSC (Images)...
Sorry.
Bst Regards
adfree said:
Maybe I am not uptodate...
But all Compression Algos or Uncompressed RC1/CSC Tricks only for bada 2 yet...
For bada 1.x no way known to modify RC1 nor CSC (Images)...
Sorry.
Bst Regards
Click to expand...
Click to collapse
Thank you...
adfree said:
Maybe I am not uptodate...
But all Compression Algos or Uncompressed RC1/CSC Tricks only for bada 2 yet...
For bada 1.x no way known to modify RC1 nor CSC (Images)...
Sorry.
Bst Regards
Click to expand...
Click to collapse
Wave Remaker opens and writes those (Bada 1.2 RC1 and CSC), too, but I'm not sure wether these (edited RC1 and CSC) are ok to flash. I have never tried (flashing) myself, and I suggest you ask forum member xsycox for more info on that. He's the one with the most experience in doing Bada 1.2 CFWs. I also had a look over his CFW files in the past, and it doesn't look like his RC1 is edited, but the CSC seems to be.
EDIT:
If you want a starting point, here it is:
I have done some Bada 1.2 modifications myself in the past, but never tested it due to an unfortunate experiment (that shouldn't have gone wrong at all) in the recent past and most probably never will. I'm scared of Bada 1.2 now. See here, read and understand the whole post. DON'T JUST FLASH THIS HOPING IT WILL BE OK. Download link is here. There are some modifications for more input languages in the CSC files in there and the RC1 contains tons of files for tons of languages (also in the standard RC1, btw). This is how I think (=not know) how it is done. I have no experience in editing Bada 1.2, of course.
Compare using WinMerge with xsycox' Bada 1.2 based CFW and you'll get an idea.
In any case let us know what you found out!
k8500 said:
Wave Remaker opens and writes those (Bada 1.2 RC1 and CSC), too, but I'm not sure wether these (edited RC1 and CSC) are ok to flash. I have never tried (flashing) myself, and I suggest you ask forum member xsycox for more info on that. He's the one with the most experience in doing Bada 1.2 CFWs. I also had a look over his CFW files in the past, and it doesn't look like his RC1 is edited, but the CSC seems to be.
EDIT:
If you want a starting point, here it is:
I have done some Bada 1.2 modifications myself in the past, but never tested it due to an unfortunate experiment (that shouldn't have gone wrong at all) in the recent past and most probably never will. I'm scared of Bada 1.2 now. See here, read and understand the whole post. DON'T JUST FLASH THIS HOPING IT WILL BE OK. Download link is here. There are some modifications for more input languages in the CSC files in there and the RC1 contains tons of files for tons of languages (also in the standard RC1, btw). This is how I think (=not know) how it is done. I have no experience in editing Bada 1.2, of course.
Compare using WinMerge with xsycox' Bada 1.2 based CFW and you'll get an idea.
In any case let us know what you found out!
Click to expand...
Click to collapse
WOW!!!
Thank dude..