had my tilt2 for over a year flashed a couple roms, (energy, Cell Pro) and the flashed Jackos two weeks ago. had some problems with the sleep of death but nothing major. then one day it wouldn't boot past the splash screen. hard reseted it, re flashed Jackos, flashed other roms, USB and SD card all with the same problem, won't boot past splash screen.
Have you tried installing the stock rom?
couldn't find the att stock rom but i found a europe stock rom and flashed that still nothing
did you try the htc website?
http://www.htc.com/us/support/tilt-2-att/downloads/
If that isn't the ROM I'll upload it and post a link later when I get home, in the meantime...have you task29'ed when you've flashed?
GT247 said:
If that isn't the ROM I'll upload it and post a link later when I get home, in the meantime...have you task29'ed when you've flashed?
Click to expand...
Click to collapse
thx for the link its the one, yep every time task29 everytime. idk what happened i left it sit for the weeked (still with europe htc rom) and today i turned it one and it worked. Flashed different rom and it worked as well. only thing i did was remove the storage card. put the storage card back in and it works. thx
Related
I've been using Mun_rus's WM6 ROM for quite a while and seeing that PDAVIET's rom was built on a more recent WM6 ROM I decided to flash PDAVIET 2.07.06.PV.
Since then I cannot flash anything on my Trinity, the update utility starts and when the progress bar reaches around 84% half the screen on the Trinity goes funny. The progress bar on the PC reaches the 100% (while the screen on the Trinity goes blank slowly slowly) but upon restarting the device PDAVIET ROM loads up again intact as if I have just done a soft reset!
I've even tried flashing WM5 again but without any success.
Trying to flash Hard-SPL does not work either and I'm running out of ideas now :-( Anyone else has this problem please? I would love to try flashing a ROM with an original IPL SPL but cannot find one. My bootloader currently says IPL 1.5/SPL 9.99.CP.
Yes I am having a similar problem. It starts to flash then stops reboots and on my pc says image fiile corrupted. I have re downloaded and extracted the files but it happens everytime. However. My trinity when it reboots is stuck in the splash screen.
I had a similar problem, though not quite what you're describing. Try removing the Mini SD (storage card) before flashing.
Also, try entering bootloader fisrt before before flashing from PC.
Hope that helps.
i have the same problem...
i get 100% done and than it is still the old one..
Well, I have now sorted it. Go to this link read first post and download and use the unbrick.
http://forum.xda-developers.com/showthread.php?t=308691&highlight=splxploit-windows
I had to run it 3 times but it has worked and now I have flashed a new rom on it and it is working fine now
deniser said:
Well, I have now sorted it. Go to this link read first post and download and use the unbrick.
http://forum.xda-developers.com/showthread.php?t=308691&highlight=splxploit-windows
I had to run it 3 times but it has worked and now I have flashed a new rom on it and it is working fine now
Click to expand...
Click to collapse
I've run the splxploit a couple of times as well. It seems to finish the process succesfully but the problem persists :-( And mine is not stuck on splash screen, the device boots normally, it's just that whatever I flash does not work. Any more ideas please?
I tryed the all i think, read the all forum up and down, started in different ways, but no rom of SSL apply...
What is that!
I am stuck with this rom?
Any of the pro cookers can help with this please? I just need to understand what could be wrong, not necesseraly a solution
capeli said:
I had a similar problem, though not quite what you're describing. Try removing the Mini SD (storage card) before flashing.
Also, try entering bootloader fisrt before before flashing from PC.
Hope that helps.
Click to expand...
Click to collapse
Hey many thanks Removing the miniSD solved my problem I flashed at least a 100 ROMS in my life and never bothered removing the memory card before ... but there you go
hi, i had the same problem. i flashed my trinity with original htc rom and after that when i tried to flash with any other rom it gave me success message after every try but in my phone there was still the same htc rom. i used that : http://forum.xda-developers.com/showthread.php?t=293632 AND IT WORKS. FROM THE MOMENT WHEN I USED THAT FILE I FLASHED MY TRINITY 2 TIMES WITH THE SAME ROMS WHICH DIDN`T WORKED PREVIOUS. you need to copy that file to your trinity and follow the instructions from the readme file. in my case i only opened it ,it started bootloader mode ,i disconected usb and connected it again and started ROMUpdateUtility with rom which i wanted.
interesting... so why does the miniSD card affect the flash?
kta- had you tried running sspl and then flashing during your failed attempts? (just curious)
This is the first time I've messed with this phone I've flashed many different models in the passed but this is the only one that is giving me issues and the worst part is that its not mine so any hell i will greatly appreciate it.
Here is what i did read what ever i can to get more accustomed to this phone. and searched everywhere to help me figure out what i can do.
So i flashed the unlocker. Coke 2.31
after i did that i flashed nfsfan's 1.5 rom using usb cable.
no i cant get into the operating system at all it hangs at the vzw splash screen.
Is there a way to get this phone back to normal? i cannot connect thru activesync and when i tried to reflash using sd card it shows the loading screen for a split secon then goes back to the bootloader.
Please help its my bros phone i need it up and running asap.
Thank you
This post helped quite a bit
ArcaneMagus said:
Just thought that I would post what happened to my phone and the steps that eventually recovered it in case it helps somebody else:
My phone was stuck with "No Radio" on the boot loader screen and the SPL as "SPL-2.31.CoKe", but none of the 3.x ROMs would flash properly that I tried. So here are the steps that eventually recovered it (mostly...):
1.) I installed the ROM above from the tri-color screen (power+camera+reset). I still had no radio, but it was letting me past this and booting up to WM. http://forum.xda-developers.com/showthread.php?t=357762
2.) I then re-flashed the 2.31.CoKe boot loader (not sure if this step is necessary but listing what worked...)
3.) I tried to install RUU_Vogue_VZW_WWE_3.14.605.1_Radio_3.37.78_Ship.exe but it failed at 10% restarting to RUUNBH screen and the installer gave me Error [290]: Invalid Command
4.) I then tried to install the latest sprint ROM straight from the HTC site:_Touch by HTC (Sprint)_RUU_PPST_Vogue_SPRINT_WWE_3.03.651.4_2_Radio_3.42.30_AM_NV_2.04_Ship this looked like it was going to fail at the same part the Verizon rom did as it rebooted at 10% to RUUNBH screen, but the Sprint installer did something (I heard the computer lose and gain connection multiple times) and eventually it went right back and continued on from 11% and finished successfully.
5.) Rebooted and I had a radio now! Rather then risking trying to install the Verizon ROM again I went straight to the custom ROM I had originally started out with: NFSFAN 6.5 V6 which is working fine for me, except the GPS which is what started out my adventure of the last 3 days...
Just a note: for all flashes except the final one I simply waited till it was at the "Tap the screen..." stage till flashing. I never let any ROM but the final one run it's customization.
Click to expand...
Click to collapse
The above method works on a Vogue that is stuck on the bootloader screen with no radio.
Or if you get a rom to install and it stops at a windows screen that says no radio.
the only difference i tried was i didn't use the HTC Official Sprint rom, as i could not find it.
I used this rom.
RUU_Vogue_4350_ALLTEL_WWE_3.10.671.1_RS3.42.30_NV2.02_PRL30031_SHIP.exe
I let all customizations run on the last rom update.
so im having some hardware problems with my phone so i need to take it in to sprint. but heres my deal, few months i downloaded some crappy rom (called krystal v5) that i ended up hating and only kept it for a day, now im using nfsfans 6.5 rom and i like that. the problem is when i downloaded that "krystal" rom it put a "krystal" splash on my phone when it starts. after numerous rom flashes that krystal splash still shows on start up.
now my plan was to reload the stock rom to get it serviced but i dont think that this will get rid of that splash. can someone help me get the original one back? its the very first splash screen.
stock bootsplash for vogue
here is the one for Cellular South Phones, it is just the HTC logo. Not sure if Sprint uses something special. Load it then load the stock sprint rom.
Jack
hockey4life0099 said:
so im having some hardware problems with my phone so i need to take it in to sprint. but heres my deal, few months i downloaded some crappy rom (called krystal v5) that i ended up hating and only kept it for a day, now im using nfsfans 6.5 rom and i like that. the problem is when i downloaded that "krystal" rom it put a "krystal" splash on my phone when it starts. after numerous rom flashes that krystal splash still shows on start up.
now my plan was to reload the stock rom to get it serviced but i dont think that this will get rid of that splash. can someone help me get the original one back? its the very first splash screen.
Click to expand...
Click to collapse
nfsfan's roms don't replace splash screens, that's why after multiple flashing with it, the bootscreen still there.
when you flash with stock rom, the original splash screens will be back
So my friend went to flash that lovely new JB ROM on his Verizon GNex; everything went fine through CWM like a normal ROM flash, and upon restarting the device to boot in to Android it just stuck at the Google logo. He left it for 10 minutes and nothing changed, so he did the following:
Pulled battery
Booted back in to CWM
Erased data/cache/etc.
Tried reflashing, same issue
Repeat with erasing data/etc.
Tried to restore Nandroid backup, greeted with corrupted error when it gets to restoring Data
Tried 3 other known good Nandroid backups, all fail at the same point
Tried just flashing known working ROMs like AOKP, same boot loop error after Google logo upon restart
Is he screwed? Does he just have to ODIN? If so how can he get stuff off the internal memory, as he has lots of pictures, music, etc. on there? Thanks!
Flashed a GSM Jellybean image to a verizon nexus?
...
IINexusII said:
Flashed a GSM Jellybean image to a verizon nexus?
...
Click to expand...
Click to collapse
No it's this one for the CDMA one:
http://forum.xda-developers.com/showthread.php?t=1738018
I flashed that ROM to my GNex and it is working like a charm.
No ideas, huh?
ive tried 3 times to get JB working on my verizon gnex as well
first time, got stuck on the new booting animation (the google X)
second time, was stuck on the google boot screen (same as your friend)
thrid time, im stuck on the google boot animation (the X) again
let me know if you find a solution please!
bkang4 said:
ive tried 3 times to get JB working on my verizon gnex as well
first time, got stuck on the new booting animation (the google X)
second time, was stuck on the google boot screen (same as your friend)
thrid time, im stuck on the google boot animation (the X) again
let me know if you find a solution please!
Click to expand...
Click to collapse
How long did you let yours sit on the X boot animation? Mine sat for probably about 10 minutes the first time and then finally booted into the OS.
I waited almost 20 minutes the first time
and right now i'm sitting at about 10 minutes =(
I don't understand whats going on, its not restarting the boot sequence (not going back to the google boot screen) but just keeps playing the boot animation
Flash the stock google image for verizon version:
https://developers.google.com/android/nexus/images
directions available in other threads.
yeah I did that then tried to get JB working again, but no luck
I'll prly just try again another time =/
thanks though
The exact same thing happened to me. I used Wugfresh tool kit to go back to stock. I lost everything on my SD card. I guess that's the price you pay for being a crack flasher !
bkang4 said:
yeah I did that then tried to get JB working again, but no luck
I'll prly just try again another time =/
thanks though
Click to expand...
Click to collapse
Are you able to access the bootloader? If so it's not bricked.
You need to flash EVERY SINGLE THING, all the partitions, bootloader, recovery, etc, everything, turn it back completely to stock. (then wipe before booting back up)
yeah i can get to the boot loader.
when i flashed to stock i used the factory image of 4.0.2 with the toolkit
everything works on 4.0.2, but i'm hell bent on getting JB to work on this phone haha
bkang4 said:
yeah i can get to the boot loader.
when i flashed to stock i used the factory image of 4.0.2 with the toolkit
everything works on 4.0.2, but i'm hell bent on getting JB to work on this phone haha
Click to expand...
Click to collapse
I guess that's the best way then. So there's no good way to get the stuff off the SD before ODIN/flashing it back to stock?
Fix
I had this same problem a bit ago. My device wouldn't boot and would sit on the Google logo.
Go back into Clockwork Recovery,
Wipe data,
Wipe cache,
Wipe dalvik
Install Jellybean
This worked for me, the problem was that I wasn't wiping everything correctly before installing Jellybean.
bkang4 said:
everything works on 4.0.2, but i'm hell bent on getting JB to work on this phone haha
Click to expand...
Click to collapse
1. Ok good.
2. Wait for a version made for the VWZ Galaxy Nexus or go buy the GSM Galaxy Nexus.
electroholic you're right, its worked! thanks a bunch
nxt said:
1. Ok good.
2. Wait for a version made for the VWZ Galaxy Nexus or go buy the GSM Galaxy Nexus.
Click to expand...
Click to collapse
Just in case you missed it, this is a version made for it, it's on my VZW GNex just fine as well as many others. There's just a few weird scragglers here and there it seems.
HELP!!
i tried to put the jellybean update on my verizon galaxy nexus and then found out it was only for gsm. now my phone has no signal at all. what do i do, i already tried to reset and restore, then i reset it and it just can't find any signal!
Well this happened to mine as well, but the funny thing is that if you just let it sit there for 5+ minutes the phone eventually boots.
ODIN
dude you might have to use odin unfortunately.:crying:
So, today I booted up my phone, To my surprise, it didn't boot correctly. The Windows logo appeared for a second, and then it went dark. Then, the phone booted again. And it's like this in loop.
I tried to hard reset. Didn't work, the same thing happens.
So then I thought of flashing some ROM. I didn't have Hard-SPL on my phone before that happened, and in order to load it, I have to estabilish an ActiveSync connection... which I simply can't do, since the WMO doesn't want to boot.
So, any solution to that? Thanks.
plrusek said:
So, today I booted up my phone, To my surprise, it didn't boot correctly. The Windows logo appeared for a second, and then it went dark. Then, the phone booted again. And it's like this in loop.
I tried to hard reset. Didn't work, the same thing happens.
So then I thought of flashing some ROM. I didn't have Hard-SPL on my phone before that happened, and in order to load it, I have to estabilish an ActiveSync connection... which I simply can't do, since the WMO doesn't want to boot.
So, any solution to that? Thanks.
Click to expand...
Click to collapse
Try flashing the stock rom from the sd card.
wizardknight said:
Try flashing the stock rom from the sd card.
Click to expand...
Click to collapse
EDIT: ok, so i downloaded few roms and one managed to flash through exe. i was happy, until i saw that booting the phone took longer than usual - just like before flashing a rom (much longer at the part where it shows all the info about phone)
then it got to that little animation. Windows logo appeared and then......... it went black. rebooted. one time it actually tried to install windows but right at the beginning screen went black and phone rebooted.
EDIT2,3: my battery run out on android and was overdrained. i think this is the cause... it also boots up the phone if i plug any usb cable in.
EDIT4: i just thought - if i managed to flash a rom, the battery IS charged. the bootloader mode was on for at least 20 minutes. so what is really the issue?
Try flashing the STOCK rom from the sd card.
Flashing a rom requires a working charged battery.
Once that works move on to other options.
wizardknight said:
Try flashing the STOCK rom from the sd card.
Flashing a rom requires a working charged battery.
Once that works move on to other options.
Click to expand...
Click to collapse
I already flashed one! I just flashed it from my computer to the phone through bootloader, I can't seem to find any stock roms that I can put on my SD card. And as i said, i can't flash a custom one because I don't have HardSPL on my phone.
And the battery seems to work correctly on bootloader.
okay, i'm down. got a new battery, and the problem still remains. i might have tried flashing the stock rom through sd card, if only i could FIND !!!! one (RHOD100, so GSM). any help on that? i'll gladly appreciate it.
EDIT: so i managed to flash the stock rom from htc - .exe is extracting the image file to temp somewhere, so that's how i got it. unfortunately, that didn't change anything. i'll leave my phone rebooting for a night and see what's up tommorow...
EDIT2: phone is dead. i will have to move on from windows mobile... about time.