I might sound a bit noob here. Well I upgraded my Imate JasJam to Windows Mobile 6.1 using the ROM of Herme 100, everything is fine so far but I cannot figure out about the bluetooth settings as I am unable to receive any file from bluetooth.
I have enabled in beam to receive all incoming beam as well but whenever I try to send a file from another device on my phone, I do not receive any notification on the phone about incoming file or anything. I have also added the phone in paired devices in bluetooth settings but everything is in vain.
Please tell me what to do
I had the same issues with many roms. I could always connect to my in car hands free and a bluetooth earpiece but could never use bluetooth for anything else.
I always thought my bluetooth had a hardware issue until I just recently used CRC 13.3 rom, I can now use bluetooth beaming and the like. Works like a treat.
I really wished I could have got Binky11's rom to work with my bluetooth as that had bluetooth printing and more..
Sorry I can't help more.
cheers,
isnt there any cab file for bluetooth? Or will I have to find some ROM instead? Or can you provide me with the ROM you are using plz?
What rom are you using?
veyka said:
What rom are you using?
Click to expand...
Click to collapse
ROM Version I installed is 3.54.255.3
Try installing Dr.Yar bluetooth.
I did that but it didnot help either
I really dont know what ROm have you used but this works for me...
do report if it helps
i tried this fix but still not working.
Instead can you recommend me some fixed ROM?
I have the Motorolla S9 bluetooth A2DP stereo headset.
I also have the Hero currently running VillainROM 3.4 but I've been trying to run a bt connection for A2DP media playback with almost all Android 2.1 ROMS with same results.
The phone pairs fine but once I start playing any mp3 headset disconnects and reconnects at random.
I should mention that bluetooth works great in my car with the stock stereo system for simple phone calls.
I searched the entire forum but couldn't find anyone else with this issue ... Modaco 3.1 people report bt stereo playback to be working fine .. I think this is a 2.1 issue as VillainROM 3.3 and 3.4 and BeHero and other 2.1 based roms have this issue.
please HELP
Hello rafynet
i had same problem and i have solved with this method:
your phone must be rooted
there is a file in /etc/bluez/audio.conf
copy that to your pc.Change the lines
from
-----------------------------
Enable=Source,Control,Sink
Disable=Headset,Gateway
-----------------------------
to
-----------------------------
Enable=
Disable=Headset,Gateway,Source,Control,Sink
-------------------------------------------
save it.
copy the changed file back to /etc/bluez/
I have tried this solution in all rom that i have tested and all work well for me, watch the entire article:
Issue 3960: Bluetooth issues with car systems in Android 1.5 / 1.6
I'm sorry, i can't post this link on forum!!
search it in google.
sorry for my english!
I'm waiting your feedback!!
I hope this solution works well for you. Try this!
your solution helped a little bit ... but bluetooth connection still drops and re-connects all the time ... it's very annoying.
I'm fairly sure this will be fixed when we get the official Hero 2.1 update.
I had noticed the same thing with my Motorola T505 ROKR handsfree adapter. Worked fine in 1.5, but in 2.1 it would disconnect every 30 seconds or so, then reconnect.
However... I've just got a new car stereo (Pioneer DEH-P6100BT) and it actually works *BETTER* in VillianROM 4.0 than it did in Modaco 3.2. In Modaco, it would only connect to "phone audio" and not "media audio," and I had to go into the Android settings and enable "media audio" each time I got in my car. With VillainROM, it connects automatically and it doesn't disconnect. Also, I've found that in 2.1, when listening to BT Audio, the music doesn't get interrupted by notification sounds, which I hated about 1.5.
I've had nothing but problem with a2dp on the hero, and it's probably the feature I need to work the most. I tried a whole host of 1.5 and 2.1 roms but none of them would consistantly connect to my pioneer deh-p700bt. I read somewhere that it's been a problem for lots of people since the 2.73.x series of updates, so I downgraded to the T-Mobile 1.76.110.6 stock rom and it's worked perfectly for me ever since! I'll have to stick with that one for now and hope it gets fixed in the upcoming 2.1 update
Hi,
I have a question about this subject :
i have a bluetooth car stereo with phone handfree inclued.
With all ROMs I tried (and a tried a lot...)
the phone handsfree always worked
Depend of the ROM, some items were available or not : (battery indicator or signal level indicator for example)
With only one ROM (and I don't remember which one), I could transfer my contact list from the phone to the car stereo system (with bluetooth).
Does someones knows if this feature will be again available into the next ROM (official or not) ?
Thx
PS : sorry for my bad english
yan74s said:
Hi,
I have a question about this subject :
i have a bluetooth car stereo with phone handfree inclued.
With all ROMs I tried (and a tried a lot...)
the phone handsfree always worked
Depend of the ROM, some items were available or not : (battery indicator or signal level indicator for example)
With only one ROM (and I don't remember which one), I could transfer my contact list from the phone to the car stereo system (with bluetooth).
Does someones knows if this feature will be again available into the next ROM (official or not) ?
Thx
PS : sorry for my bad english
Click to expand...
Click to collapse
The Android SDK did not include a bluetooth API in 1.5, but it is included in 2.1. I would guess we'll see a big improvement with the official 2.1 update.
Hi,
Is there any way to have Voice Dial to work via Bluetooth with Oxygen 2 on Desire ?
I am getting a kind of two "bong" audio feedback on the bluetooth device when I hit the command button instead of being asked to say a command. Getting the same thing when VoiceSearch and TTS is installed...
And it works fine when using Redux, CM or older Oxygen version.
bye.
Is there really nobody using VoiceDial over Bluetooth with Oxygen on their Desire ????
I am also facing the same problem.
Other roms I installed supported it out of the box (Don´t remember which..)
I guess we'll have to do some research unless someone comes up with the solution...
Actually I found it.
LeeDroid supports voice dial. (But it's not Gingerbread based)
Hi all,
I wasnt allowed to post inside the developers area coz am a newbie. Sorry if i dont know where else to post so again sorry in advance... am all new to the android world (1st time getting an android fone SG Note2 and then 1st time flashing a ROM (AR HD 5.0)).
My problem is when im trying to use any kind of bt stereo headset it just wont work. Ive paired/unpaired/paired again but still no go. Tried using the BT stereo headset to other smartphones and all go.
I havent installed any multimedia apps that might mess up the recently installed/flashed AR HD 5.0.
Can anyone please help me. Ive tried reading/scanning the developer's forum thread but cant seem to find any workaround here....
Please please dont scorn me for being so stupid about the bt issue that im having...
Any help would really really be appreciated.... so to those that will try to help me out... many thanks in advance....
OK greetings to all that may see this thread. I have used these forums in the past with great success so here goes. I presently have a HTC desire that has been rooted and flashed with Cyanogen Mod 7.1.0 Desire. I chose this rom to get my phone to work in BT mode with my oldish Becker Cascade 7411 head unit and it works really well.
I have now ordered a HTC OneX from my provider Rogers here in Canada. My question is there a Rom outhere that installs new bluetooth stack that supports HFP 1.0? If someone could point me in the right direction that would really help or perhaps they can confirm that there is no way I will be able to make my OneX function with a BT HFP 1.0 protocol.
Cheers
i maybe is already working so no need to activate it or so...but i could be wrong...