Hello i noticed that cm7 rc1v2 comes with 1ghz max clock speed at default. What are the possibilities of damage? How can I set it back to 800mhz max clock? maybe setcpu? thanks the answer!
Best Regards
Ernő
Recovery has o.c option.
Sent from my MB525 using XDA App
i dont think it will damage anything..1Ghz is the max clock..it rarely goes to max..like wen u r playing a good graphics games or multi tasking and all..if u want u can underclock to 800Mhz also..
either use recovery overclock option or install setvsel and change the values.
recovery is when i put the volume down when the led lights blue?
edit: I found it but i dunno wich option is to set it to default 800 mhz anyone cold tell me what to do from step to step?
PLS Thank you!!!
Best regards.
Ernő
still waiting for answer wich option is the default at recovery? there is no such as default only numbers
Titankahn said:
still waiting for answer wich option is the default at recovery? there is no such as default only numbers
Click to expand...
Click to collapse
You can try the following
Turn off your phone and turn it back on
When you see the blue notification light, press the volume down button
Select CPU Settings (use volume up and down button to navigate, power button to select)
Select CLK3: [1000]
Keep pressing [-10 Clk3] till you see the desired speed (for eg. 800 Mhz )
Once done, Select Go Back and Reboot the system.
Bulletproof MIUI Addon Pack
Due to a lack of time, I've discontinued weekly updates to Bulletproof MIUI. I didn't want to leave anyone behind, so I believe I've come up with the next-best-solution.
The Bulletproof addon pack is designed to be flashed directly over the weekly translated MIUI builds (e.g. MIUI.us/MIUIandroid.com, etc). The pack will enable all of the features listed below, and should make your phone run significantly better.
The addon pack allows you to update as soon as the translations are available, so you're not stuck waiting on me to update every week! This pack should (in theory) work on pretty much any G2/DZ ROM, but your milage may vary. Please always make a backup before flashing, just in case.
Features
- /system converted to ext4 file system.
- Virtuous OC Daemon (Installing SetCPU or CPU Tuner will automatically disable the daemon.)
- Tsubus' ILWT kernel
- EFS wiped on flash to prevent GPS issues.
- Wifi Calling conditionally installed for T-Mobile US users, uninstalled otherwise.
- Modified SD card read cache (set to 4096)
- Applications Zipaligned on boot (skipped if already ZA'd)
- App Widget Picker added for users who prefer to use alternative launchers.
- CyanogenMod/Galaxy Nexus ringtones/notification/alarm tones
- OC/UV Beater bundled to control/configure OC
- Themed keyboard that's much more MIUI-like
Installation Instructions:
- Install the MIUI ROM of your choice (MIUI.us/MIUIAndroid.com recommended)
- Flash the Addon pack
- Configure OC settings via the OC/UV Beater application
Whenever you update your MIUI each week (either via OTA or by manually downloading/flashing), simply flash the pack afterwards and you're all set!
Download
v1.2
Minus - http://min.us/lAkk2rM7LnoLX
Mediafire - http://www.mediafire.com/download.php?pv6t9kdngw3adt9
md5: 09038D6A0F94C8331A8F3B45541DDAC9
Changelog
v1.2
Code:
- Temporarily removing battery calibration scripts (causing some users to get stuck at HTC splash) (thanks for the tip eFFeRaTuM)
- Updated several other scripts, permissions
- ILWT kernel is now bundled in the pack.
Older (unsupported) releases can be found here.
MIUI Resources and Addons
1. Long press on the icon in Toggles to launch the settings for that icon.
When you pull down the notification bar, you will see the Toggle settings for plenty of options (such as WIFI, volume, backlight etc). Long press on any icon in the Toggle mode will launch the setting for that icon.
2. Built-in Screen Capture function
One of the lacking feature in Android is the lack of a built-in screen capture feature (like in iPhone). Not anymore. With MIUI, you can press the “Menu” key and “Volume Down” key at the same time to capture a screenshot. The printed image is saved in the “MIUI: directory in the sd card.
3. Press Home key to preview screens
Pressing the Home button once will bring you back to the Home screen. Pressing the Home button button will show you all the screen thumbnails. You can also ad/remove screens from here.
4. Slide from left to right to quickly delete a message or a call log.
In the SMS or Dialer app, swipe left or right any entry will bring up the Delete mode.
5. Move home screen icon easily
Hold down an icon by one hand to enter Edit Mode, and then use the other hand to slide the screen to move the icon to the target screen.
6. Launch Music Player in lockscreen
In the lockscreen, double tap the time zone to launch the Music Player. (The Music Player is hidden by default, unless a song is playing)
7. Quickly access the Dialer or SMS from the lockscreen
In the lockscreen, hold down the icon of Call or SMS, and you can enter the responding program.
8. Activate the torch from the lockscreen
In the lockscreen, hold down the Home button to enable the torch.
9. Access shortcut menu from contact image
In the Calls, SMS or Contacts app, tap the contact image and a shortcut menus will appear.
10. Search via voice recognition
Long press on the Search button will launch search via voice recognition.
11. Switch the Battery UI to show percentage
The default battery UI can be switched to display percentage of left battery capacity. To do so, go to “Settings -> System -> Battery Settings -> Battery Indicator Style -> Percentage“.
12. Long press on the Home button to show History
Like any other Android ROM, long press on the Home button will show the recently used apps. However, in MIUI, there is also an App Killer and App Manager button. Swiping the popup left will show the search form.
13. Setting up IP dialing
If you need to add an IP prefix for a particular number in a strange land, you can set it in Settings -> Common -> Calls Settings. Turn the “Auto IP dialing” ON and set the IP prefix and current area code.
14. Send SMS for rejected calls
When you are not available to answer the phone, you may slide up the panel to reject the call and to send a message to the caller at the same time.
15. Enable 720P to record a video
If your phone comes with a camera that support HD recording, you can enable 720P in the Video mode. Run the Camera app and switch to Video. Select “High” -> “720P” in the pop-up menu of video quality.
16. Quickly uninstall an app
To uninstall an app, simply press and hold the icon until the trash bin show up at the top of the screen. Move the icon to the trash bin to uninstall the app.
17. Quickly read SMS and mark it read
In the lockscreen, press down the SMS button (without dragging it down) to reveal the new incoming message on the lockscreen. Once you have finished reading it, double tap on the SMS button to mark it read.
18. Making the MIUI launcher smoother
On first boot on a fresh install, go into Launcher Settings, and toggle hi-res graphics on, then back off again (If you intend on using the stock MIUI Launcher, this seems to smooth it out significantly)
19. Brightness slider on notification pulldown
Disable auto brightness and you'll get a brightness slider in the notification toggle pulldown.
20. Built in FTP server
MIUI has a built-in FTP file server. To use it, open the File Manager application, and tap on the "FTP" tab.
BONUS: MIUI is pronounced "ME YOU EYE", but say it however you want
Source for 1-17: http://maketecheasier.com/17-hidden-tips-and-tricks-for-miui/2011/05/15
Credits
- Official MIUI Development Team
- CyanogenMod Team
- MIUI.us for the English translations
- rmk for the Virtuous OC Daemon and optimizations
- g4rb4g3 for the bootanimation from his MIUI builds.
- brainmaster for the Lucid Keyboard and SD card tweak.
- tsubus for his kernel
- cjoliver for his OC/UV Beater application
Please make your donations to the above mentioned individuals, they did all the hard work!
Disclaimer
You take full responsibility for your phone. I will not be liable if anything goes wrong.
Don't forget to hit "Thanks" if you like the ROM!
More here soon
Looks sick
Nice design and fast - its all i need
Definitly will give this a try!
Sent from my HTC Desire Z using XDA Premium App
What makes this rom > osimood's?
virtuous OC! time to ditch osimod's. Ill miss extended settings though
Sent from my HTC Vision using Tapatalk
I installed it and it performs well so far. I flashed the tiamat 1.1 kernel to because i like the smartass governor a lot, but now it seems as if the virtuous overclock controller just doesn't work with it (fc's all the time).. Does this mean that the daemon doesn't work either?
Whats better abouth the virtous controller compared to setcpu?
Cheers keep up the good work tho!!
thanks for your hard work, will try it later!
mr.boonet said:
I installed it and it performs well so far. I flashed the tiamat 1.1 kernel to because i like the smartass governor a lot, but now it seems as if the virtuous overclock controller just doesn't work with it (fc's all the time).. Does this mean that the daemon doesn't work either?
Whats better abouth the virtous controller compared to setcpu?
Cheers keep up the good work tho!!
Click to expand...
Click to collapse
Oh well so much for the bulletproof part, guess this was a flop. Let me know when the FC's go away and we'll talk.
GetTargetedFans said:
Oh well so much for the bulletproof part, guess this was a flop. Let me know when the FC's go away and we'll talk.
Click to expand...
Click to collapse
The overclock daemon wasn't intended to work with the smartass governor. The daemon uses screen off profiles which makes the smart ass governor useless. Switch back to the on demand governor or the per shoot kernel and things will probably work better
Sent from my HTC Vision using XDA Premium App
first thing i notice is that scrolling through the homescreens is smooth as butter! wow.
im going to try this one for some time, see if it becomes my new favourite!
Just wondering is the kernel important to work with the daemon or does the governor just need to be set to on demand and it works with any miui compatible kernel?
so could i use tiamat or streamline5 with this kernel then? (sorry i know jsut the concept behind daemon but not the specifics like this)
The force closes of the controller are due to the frequencies in the scripts that are default not being supported by the kernel. If you want to use a different kernel change the frequency in the script then everything will work as expected.
Sent from my HTC Vision using XDA App
awesome tun4fish your doing roms again.
Awesome tun4f1sh, saw you mention this in the irc a few weeks back and kept meaning to ask about it.
Do Androids dream of electric sheep?
LagunaCid said:
virtuous OC! time to ditch osimod's. Ill miss extended settings though
Sent from my HTC Vision using Tapatalk
Click to expand...
Click to collapse
You can try to flash the extened settings. They should work. http://forums.miuiandroid.com/showthread.php?7738-MOD-Extended-Settings-Menu-Options
Do Androids dream of electric sheep?
GetTargetedFans said:
Oh well so much for the bulletproof part, guess this was a flop. Let me know when the FC's go away and we'll talk.
Click to expand...
Click to collapse
Where is the link to the Rom you cooked up. Think you can do do better? Let me know when It's released and we'll talk.
If have to criticize don't be so rude about it.
i totally agree with u...
Nonsense
link appears to be broken
The latest builds can always be found here: http://www.mediafire.com/miui_vision.
...Oops! This link appears to be broken.
Ok so now after reading this:
http://forum.xda-developers.com/showpost.php?p=14529333&postcount=5
things are starting to make sense, and it seems legit to go with the pershoot kernel and skip the smartass governor alltogether.
Let's try with the pershoot kernel then
cheers
When I use tune in I go back to the home screen or browse, my phone will frequently close the app. This shouldn't happen, especially when its in the notification bar also, its supposed to run in the foreground.
I was thinking of moving it in to the system/app folder but before I do, can someone suggest a better solution?
Maybe Change the Max events per second or back ground process limits but I wouldn't know what would be a good setting, or if it has anything to do with it.
Im currently running Black Ice with samurai kernel. Its not the ROM or the kernel because I've had this problem since I've had the phone.
Hi,
First,the "max_events_per_sec" precisely "windowsmgr.max_events_per_sec" has nothing to do with your issue,it's about scrolling speed in the buid.prop.
In Developper Options Check if "Don't keep activities" is untick and if "Background process limit" is set to "Standard limit".
This rom is based on AOKP I believe,so in your "Control rom" (where there is the options for Navbar,Lockscreen,etc...) you get something like "Performance"/Free memory,check if this value is not too high,currently 80mb is good.
Last thing check your init.d scripts,there are probably that manages the ram (but let Android do it by itself).If you have scripts like "**VM","**LMK",or "**FreeMemory" even "**Tweaks",take it a look it's surely about ram.
Rename them with .bak or disable them via your Rom control then reboot ant test.
EDIT:and in Tune in,is there an option for/about settings/running in backround?
N, no Tune in settings like that, but thanks for your reply.
Hi,
many time i see people which enable "Set on boot" after undervolt/underclock the CPU. And i wonder why ?
When i restart the phone after modify settings on STweaks, my settings are saved. So why should i put "Set on boot"?
That's mean my settings are applied just once and i have to always open STweaks for enabled my new settings ?
When i go on CPU spy plus, i can see my underclock, so how to know if my undervolt are saved ?
Thanks :angel:
Anyone?
Hi I just updated my Xperia Play to CM10 Zeus FXP226 Rom + Lupus Zeus v13 Kernel and it's working great. The only problem is that even though the device is definitely rooted I can't seem to change any of the settings in SetCPU. I use the slider to choose a new min/max and governor/scheduler but it doesn't change the current settings text underneath where it shows the current cpu speed. I have tried selecting 'Set On Boot' and rebooting and it saves my selection but the text under current cpu speed still states I'm on default settings. I have never had this problem before.. Please help.
ryballs said:
Hi I just updated my Xperia Play to CM10 Zeus FXP226 Rom + Lupus Zeus v13 Kernel and it's working great. The only problem is that even though the device is definitely rooted I can't seem to change any of the settings in SetCPU. I use the slider to choose a new min/max and governor/scheduler but it doesn't change the current settings text underneath where it shows the current cpu speed. I have tried selecting 'Set On Boot' and rebooting and it saves my selection but the text under current cpu speed still states I'm on default settings. I have never had this problem before.. Please help.
Click to expand...
Click to collapse
Try changing cpu freq in setting
Sent from my R800i using xda premium
ryballs said:
Hi I just updated my Xperia Play to CM10 Zeus FXP226 Rom + Lupus Zeus v13 Kernel and it's working great. The only problem is that even though the device is definitely rooted I can't seem to change any of the settings in SetCPU. I use the slider to choose a new min/max and governor/scheduler but it doesn't change the current settings text underneath where it shows the current cpu speed. I have tried selecting 'Set On Boot' and rebooting and it saves my selection but the text under current cpu speed still states I'm on default settings. I have never had this problem before.. Please help.
Click to expand...
Click to collapse
You can use lupus menu to do it it 100% sticks there. Or try nofrills.
setcpu does not work correctly in cm9+