Related
would anyone tell me how to use data2ext with detailed steps??
If the ROM comes with the script, it automatically sets itself up for use.
Nothing needed.
BTW, CM7 supports A2SD+ in the thread.
http://forum.cyanogenmod.com/topic/12205-data2ext/
http://forum.xda-developers.com/showthread.php?t=902395
then does CM7 come with the required script??
It should, it's in the link I've posted.
Or try this:
http://forum.xda-developers.com/showpost.php?p=12835222&postcount=1893
But instead of the A2SD+ script use the d2ext one.
davebugyi said:
Or try this:
http://forum.xda-developers.com/showpost.php?p=12835222&postcount=1893
But instead of the A2SD+ script use the d2ext one.
Click to expand...
Click to collapse
All the information seems so trouble for me....would you please list the brief steps for doing data2ext in CM7??
davebugyi said:
Or try this:
http://forum.xda-developers.com/showpost.php?p=12835222&postcount=1893
But instead of the A2SD+ script use the d2ext one.
Click to expand...
Click to collapse
I don't think the steps can get much easier than this.
but where is the data2ext script?? I cannot find it.
The link was in the post's, but to make it easier for you;
http://forum.xda-developers.com/showthread.php?t=719151
thx for you help.
But the link is for a2sd, not for data2ext...........it is the same???
I seems confuse on the these terms.......
The data2ext, is typically for ROM developers, which they sometimes include automatically in new ROMs.
As far as public distribution, I am not sure of, as I personally don't use it.
Maybe some others can lead you in the right direction.
Well, I wanted to try this, I saw it in DEFY forums and as always I thought this could work for BRAVO too.
I tried and everything is working fine.
Im using now CM7 and ICS CM9 Quarx version with froyo kernel
I'll try later with GINGERBLUR!
Follow this steps:
http://forum.xda-developers.com/showthread.php?t=1364659
Any question Im here!
josuearisty said:
Well, I wanted to try this, I saw it in DEFY forums and always I thought this could work for BRAVO too.
I tried and everything is working fine.
Im using now CM7 and ICS CM9 Quarx version with froyo kernel
I'll try later with GINGERBLUR!
Follow this steps:
http://forum.xda-developers.com/showthread.php?t=1364659
Any question Im here!
Click to expand...
Click to collapse
I tried also with good results! CM7 + CM9 is a good combo - allows us to have camera working as well as the latest and greatest AOSP. It's amazing how similar the two devices are.
The trick is to correctly allocate the sizes of the 3 ext-3 fsimages based on personal use. 300 mb was way too small for me
This mod definitely has lots of quirks though...if you don't know what you're doing, it might not work.
After downloading files, I would suggest looking at this post: http://forum.xda-developers.com/showpost.php?p=21401063&postcount=249
So u have a working camera on Cm9 ::
Sent from my MB520 using XDA App
marquae11 said:
So u have a working camera on Cm9 ::
Sent from my MB520 using XDA App
Click to expand...
Click to collapse
no.
cm7 w/ camera is on 2ndint
cm9 w/o camera is on 2ndboot
if i want camera, i can simply boot into 2ndint. so then i don't have to keep reflashing cm7 if i want a working camera! it's very convenient
Oh I was very confused
Sent from my MB520 using XDA App
josuearisty said:
Well, I wanted to try this, I saw it in DEFY forums and as always I thought this could work for BRAVO too.
I tried and everything is working fine.
Im using now CM7 and ICS CM9 Quarx version with froyo kernel
I'll try later with GINGERBLUR!
Follow this steps:
http://forum.xda-developers.com/showthread.php?t=1364659
Any question Im here!
Click to expand...
Click to collapse
what is GINGERBLUR and froyo kernel???I am using CM7 now.Is there any way to make camera working on CM9 for bravo?????
---------- Post added at 11:03 PM ---------- Previous post was at 10:59 PM ----------
syllogyking said:
no.
cm7 w/ camera is on 2ndint
cm9 w/o camera is on 2ndboot
if i want camera, i can simply boot into 2ndint. so then i don't have to keep reflashing cm7 if i want a working camera! it's very convenient
Click to expand...
Click to collapse
Do you mean u boot into CM7 for working camera and boot into CM9 for other time & this is very convenient due to multi boot manager????.OR have u found any means by which u get working camera on CM9???
eternal.sumit said:
what is GINGERBLUR and froyo kernel???I am using CM7 now.Is there any way to make camera working on CM9 for bravo?????
---------- Post added at 11:03 PM ---------- Previous post was at 10:59 PM ----------
Do you mean u boot into CM7 for working camera and boot into CM9 for other time & this is very convenient due to multi boot manager????.OR have u found any means by which u get working camera on CM9???
Click to expand...
Click to collapse
I have a library replacement hack to get photo camera working, should be in the next thead down. I'd use the libraries from the latest nightly released earlier today, they're probably better since they were updated since last release.
josuearisty said:
Well, I wanted to try this, I saw it in DEFY forums and as always I thought this could work for BRAVO too.
I tried and everything is working fine.
Im using now CM7 and ICS CM9 Quarx version with froyo kernel
I'll try later with GINGERBLUR!
Follow this steps:
http://forum.xda-developers.com/showthread.php?t=1364659
Any question Im here!
Click to expand...
Click to collapse
please can you provide with detail step by step guide of how to do this.The link you provided as steps is quite confusing.I have full working quarx CM7 nightly edition of bravo as base ROM.I don't even see you tube video for this guide.It would be great aid to bravo users if you could possibly upload video on this at you tube.
eternal.sumit said:
please can you provide with detail step by step guide of how to do this.The link you provided as steps is quite confusing.I have full working quarx CM7 nightly edition of bravo as base ROM.I don't even see you tube video for this guide.It would be great aid to bravo users if you could possibly upload video on this at you tube.
Click to expand...
Click to collapse
If you are running alredy CM7 it will be very easy for you.
You can try Multiboot manager instead of doing it manually:
http://forum.xda-developers.com/showthread.php?t=1522329
It is very easy, anything Im going to be here to answer!
Probably naive...
I'm just getting back into the fun, and it's nice to see how things have progressed...wow.
Will multi-boot CM7/CM9 share app data?
EDIT: And I don't see the Play app in CM9?
sdrawkcab3 said:
I'm just getting back into the fun, and it's nice to see how things have progressed...wow.
Will multi-boot CM7/CM9 share app data?
EDIT: And I don't see the Play app in CM9?
Click to expand...
Click to collapse
Follow this thread and download gapps for ics maybe you skipped.
http://forum.xda-developers.com/showthread.php?t=1595898
You should access to your account in the rom so that everything updates itself.
josuearisty said:
If you are running alredy CM7 it will be very easy for you.
You can try Multiboot manager instead of doing it manually:
http://forum.xda-developers.com/showthread.php?t=1522329
It is very easy, anything Im going to be here to answer!
Click to expand...
Click to collapse
thanks a lot!!.I finally succeeded in multibooting CM7 & CM9.But when i flash CM7White Rabbit it doesn't boot at all.I think I made mistake while creating virtual image file.can u please help me succeed CM7White rabbit to boot flawlessly using multi boot.Also I need to install MIUIpikachu version via multiboot.please help me.
eternal.sumit said:
thanks a lot!!.I finally succeeded in multibooting CM7 & CM9.But when i flash CM7White Rabbit it doesn't boot at all.I think I made mistake while creating virtual image file.can u please help me succeed CM7White rabbit to boot flawlessly using multi boot.Also I need to install MIUIpikachu version via multiboot.please help me.
Click to expand...
Click to collapse
Please try it again.
I tried three roms at a time and worked fine for me.
CM7, CM9 and MIUI.
I will try this rom to see if there is a problem with me.
WR and Pikachu were originally made to be used with 2nd-boot, but that never worked with the Bravo. I've never tried them on multiboot. I don't normally use multi boot due to too much music on my sdcard. That, and I had problems with roms with bugs/glitches they didn't have when installed to the system.
Honestly, WR is buggy as hell. I'd release an update, but I can't get some of the tweaks to work right and there's no radio after installing the updated one. If you want an updated WR, the closest thing is my current nandroid...The only problem is its touch recovery and I've never once tried multi boot with touch recovery.
I suppose I could remove touch recovery up my nandroid later today. It has working Bravia(yes I tested before and after and I made a difference), updated beats audio, 30 step volume, cyanbread framework themeing, brews coffee, the miui explorer from Defy forum, custom framework animations, transparent status bar/notification drawer, walks your dog, and zepplinrox's scripts already ran and set up. It has everything WR had except Go Launcher and Miui apps.
Autocorrect is pissing me off. Miui was Louis, Mohican, and Minuit. And my thumb is sore now.
josuearisty said:
Follow this thread and download gapps for ics maybe you skipped.
http://forum.xda-developers.com/showthread.php?t=1595898
You should access to your account in the rom so that everything updates itself.
Click to expand...
Click to collapse
Thanks, got Gapps working! Now I can't seem to figure out root?
A little late, but superuser was broken on ICS multiboot. Its fixed on the 0417 release.
Has anyone else been having problems installing multiboot when CM9 is the primary nand rom? It installs, boots to 2nd-system, but nothing works except boot from nand. Selecting anything other than boot from nand gives me the multiboot error screen and I have to reboot. The same zip works perfectly fine with CM7.
skeevy420 said:
A little late, but superuser was broken on ICS multiboot. Its fixed on the 0417 release.
Has anyone else been having problems installing multiboot when CM9 is the primary nand rom? It installs, boots to 2nd-system, but nothing works except boot from nand. Selecting anything other than boot from nand gives me the multiboot error screen and I have to reboot. The same zip works perfectly fine with CM7.
Click to expand...
Click to collapse
I have never installed cm9 as a prinary rom, well I did it, but didnt install other roms.
ONE IDIOT QUESTION： two system will use more battery? Or there are any disadvantage to use two system?
769151238 said:
ONE IDIOT QUESTION： two system will use more battery? Or there are any disadvantage to use two system?
Click to expand...
Click to collapse
A system installed on the sdcard tends to use a bit more battery in my experience. That and the lost gigabyte of sd storage are the only disadvantages of using multiboot.
I will add that some roms have glitches when installed to the sdcard they normally wouldn't have as a nand install. Its a hit or miss when dealing with multiboot sd roms and glitches.
Hello there,
I'm looking for a Sense ROM, but i cannot find anything suitable for me - and i have already tried a lot of them.
First of all i'm looking for ROM that:
* is stable, i don't need any freezes, reboots, etc
* is based on official HTC release
* has integrated Sense 3.0 o newer
* the battery status indicator on status bar has a percentage value on it - not next to, as it looks like 2 icons then and needs more space on status bar,
* has integrated app2sd or sth like that, what allows me to mount ext4 partition on sdcard as /data
* does not integrate a lot of stuff, i can install whatever i need from market
* and yes, i'd like to be able to use latest Google Play without problems
Any suggestions?
Sense 2.5? Which one is it?
erklat said:
Sense 2.5? Which one is it?
Click to expand...
Click to collapse
Sorry, my fault. I meant 3.0
http://forum.xda-developers.com/showthread.php?t=1223996
It has built in Darktremors a2sd but you can change that to anything you want, just replace the a2sd script in /system/etc/init.d/
k3lcior said:
http://forum.xda-developers.com/showthread.php?t=1223996
It has built in Darktremors a2sd but you can change that to anything you want, just replace the a2sd script in /system/etc/init.d/
Click to expand...
Click to collapse
I hope its stable enough and does not suffer from freezes that some of these Sense3.5 ROMs face during an incoming call and BSODs
dvsk69 said:
I hope its stable enough and does not suffer from freezes that some of these Sense3.5 ROMs face during an incoming call and BSODs
Click to expand...
Click to collapse
Most likely unstable overclocks.
k3lcior said:
Most likely unstable overclocks.
Click to expand...
Click to collapse
I agree, never had 1 problem with runnymede aio s.e. People think they have to OC the ****e out of roms and think that makes them better, faster, smoother. :banghead:
Sent from my HTC Desire
k3lcior said:
http://forum.xda-developers.com/showthread.php?t=1223996
It has built in Darktremors a2sd but you can change that to anything you want, just replace the a2sd script in /system/etc/init.d/
Click to expand...
Click to collapse
Just looking at this one myself. A couple of basic questions if I may:
With the extras that are listed, is there somewhere I can look up what they all do to decide what I might want? and
If I use some of them, do I simply run those files after flashing the rom in Recovery before rebooting?
Never had to add extras before.
Im pretty sure they are zip files so u just download them and boot recovery and install from sdcard.
Always make sure u have a nandroid backup of the rom (just incase)
Sent from my HTC Desire
---------- Post added at 09:49 PM ---------- Previous post was at 09:47 PM ----------
k3lcior said:
http://forum.xda-developers.com/showthread.php?t=1223996
It has built in Darktremors a2sd but you can change that to anything you want, just replace the a2sd script in /system/etc/init.d/
Click to expand...
Click to collapse
Mite give this rom a bash, i miss sense
Sent from my HTC Desire
jmcclue said:
Im pretty sure they are zip files so u just download them and boot recovery and install from sdcard.
Always make sure u have a nandroid backup of the rom (just incase)
Sent from my HTC Desire
---------- Post added at 09:49 PM ---------- Previous post was at 09:47 PM ----------
Mite give this rom a bash, i miss sense
Sent from my HTC Desire
Click to expand...
Click to collapse
They are zips, you're right. Any idea where I can find out what they are for? They seem to be options to have or not to have certain features but I have little idea as to what those features are.
EDIT:
Found some info - a little googling goes a long way......
simon12 said:
They are zips, you're right. Any idea where I can find out what they are for? They seem to be options to have or not to have certain features but I have little idea as to what those features are.
EDIT:
Found some info - a little googling goes a long way......
Click to expand...
Click to collapse
Aced-off is the best sense 3 rom that i have used. Its made by the developer of Runnyrom. Try it out.
Sent from my Dell Streak.
mattytt said:
Aced-off is the best sense 3 rom that i have used. Its made by the developer of Runnyrom. Try it out.
Sent from my Dell Streak.
Click to expand...
Click to collapse
From what i can see, its the same as Cool3D sense 3 by coolexe and i think its the same rom pretty much with a few little changes
Sent from my HTC Desire
jmcclue said:
From what i can see, its the same as Cool3D sense 3 by coolexe and i think its the same rom pretty much with a few little changes
Sent from my HTC Desire
Click to expand...
Click to collapse
Tried this Cool3D sense3.5 ROM today. Firstly it was laggy and second it always died when the phone was in idle. Had to pull out battery and restart every time. Changing Kernel or governor setup didnt help either.
Back to my good old cool droid v3
What about this ROM: http://forum.xda-developers.com/showthread.php?t=1318370 ?
Looks very similiar to the recommended one: http://forum.xda-developers.com/showthread.php?t=1223996 also made by the same author(s), just with newer sense (3.0 vs 3.5). What do you think?
And on more question... i have forgotten to mention that in 1st post, but.... do they support 802.11n wifi connections?
dvsk69 said:
Tried this Cool3D sense3.5 ROM today. Firstly it was laggy and second it always died when the phone was in idle. Had to pull out battery and restart every time. Changing Kernel or governor setup didnt help either.
Back to my good old cool droid v3
Click to expand...
Click to collapse
Sense "3" i said. Not sense 3.5, that rom is runny v7
Sent from my HTC Desire
Hmmm, why do you recommend Sense 3.0 over 3.5? Due to stability issues if i understand correctly?
And last question - does AceSMod007-3D that you recommend support 802.11n wifi connections?
belliash said:
Hmmm, why do you recommend Sense 3.0 over 3.5? Due to stability issues if i understand correctly?
And last question - does AceSMod007-3D that you recommend support 802.11n wifi connections?
Click to expand...
Click to collapse
One more question - what about SagaSMod007? Looks like its a new mod...
the leedroid ported from DHD is very good .
i used and it was fast and stable
General thread for the JB CM10/AOSP based rom by cronmod dev team here and the ICS CM9 based rom here.
Check the respective rom sites for a what's working/not working list, features and download links. Discuss general things about the rom here such as a2sd scripts and any issues
As requested by the dev for the ICS rom:
What's NOT working?
Code:
[LIST]
[*]Camera force closes while recording video
[*]Hardware decoding for video playback -> laggy playback of 720p (use software decoding in Mx Player instead).
[*]Home/Search key (use the fix over [URL="http://forum.xda-developers.com/showpost.php?p=34075493&postcount=131"]here[/URL])
[/LIST]
Anything that isn't said there is working fine. Will update the list if others find anything that doesn't work. Before asking for help do check you have the right hboot and that the md5 is correct after you download the rom. Also make sure you perform a full wipe when migrating to these roms.
Bear in mind that ICS was not made for our devices. Do not expect the stability of GB but the devs have done a great job on this and it is quite stable and quick for daily use.
Installation for CM9 ICS rom:
Code:
[U]Full wipe recommended before each flash from new version and is NEEDED if coming from any other rom.[/U]
Partition SD card so you have less than 1.5gb in sd-ext partition and the rest as FAT32. Gparted is recommended.
Flash the rom from recovery.
Grab m2sd from [URL="http://forum.xda-developers.com/showthread.php?t=1342387"]here[/URL] (credit to dk_zero-cool) and flash it from recovery using whatever options you want (recommended by to choose apps and dalvik).
Wipe cache/dalvik and reboot :)
You can use cron's INT2EXT scripts as well from here and just flash in place of m2sd.
Feel free to ask any questions here but keep the dev threads on topic.
Anyone using the JB rom if you could post a not working list from your tests that'd be great .
Since corey moved on to JB the cron r2 hboot isn't available on the website anymore. The current version of the ICS cronmod rom still fits on to the 183mb system hboot so I thought to put this up here for those that want a bit more space in data
WARNING: The size of the system partition may increase in future so the hboot might not be compatible with future versions of cronmod cm9.
Check md5 before flashing and flash through fastboot using "fastboot flash hboot filepathAndName.img"
md5: 172965041d6483dd9e57d726096bab73
pawan1993 said:
Since corey moved on to JB the cron r2 hboot isn't available on the website anymore. The current version of the ICS cronmod rom still fits on to the 183mb system hboot so I thought to put this up here for those that want a bit more space in data
WARNING: The size of the system partition may increase in future so the hboot might not be compatible with future versions of cronmod cm9.
Check md5 before flashing and flash through fastboot using "fastboot flash hboot filepathAndName.img"
md5: 172965041d6483dd9e57d726096bab73
Click to expand...
Click to collapse
Give link to cmx boot animation here so I can add in rom.
Regards
Sent from my HTC Desire using xda app-developers app
Yasir Javed Ansari said:
Give link to cmx boot animation here so I can add in rom.
Regards
Sent from my HTC Desire using xda app-developers app
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1847678
There you go
Hello,
is this ROM stable for everyday use ?
Frem
frem said:
Hello,
is this ROM stable for everyday use ?
Frem
Click to expand...
Click to collapse
yes the only issues are listed in the threads
frem said:
Hello,
is this ROM stable for everyday use ?
Frem
Click to expand...
Click to collapse
Its quite usable as a daily rom. At least I use it daily. But don't expect the level of stability like gingerbread. I mean, The kernel is still under improvement. Best way is to use it for a few days and judge yourself.
Regards
Sent from my HTC Desire using xda app-developers app
Hello,
I flashed this ICS rom just before Yasir took over and I must say I'm happy with it.
It is a bit slower than my previous CM7 rom of course but nothing dramatic, and it somehow seems more stable for some reason (GPS works, for example!).
And I still get a quite big amount of space on data thanks to the cron r2 hboot, which is great!
And I also love the CM9 tweaks.
So overall a good surprise for my first jump from CM7 roms.
But I tested Chrome and discovered it is so laggy it is unusable. Do you guys have the same issue?
Sillik said:
Hello,
I flashed this ICS rom just before Yasir took over and I must say I'm happy with it.
It is a bit slower than my previous CM7 rom of course but nothing dramatic, and it somehow seems more stable for some reason (GPS works, for example!).
And I still get a quite big amount of space on data thanks to the cron r2 hboot, which is great!
And I also love the CM9 tweaks.
So overall a good surprise for my first jump from CM7 roms.
But I tested Chrome and discovered it is so laggy it is unusable. Do you guys have the same issue?
Click to expand...
Click to collapse
Chrome isn't made for our devices. Not the best browser for us but it's great on other phones
frem said:
Hello,
is this ROM stable for everyday use ?
Frem
Click to expand...
Click to collapse
The rom itself is amazingly quick and stable. Considering it's ICS I'd say it's the best ICS rom out right now. Haven't tried CronMod JB though.
pawan1993 said:
Chrome isn't made for our devices. Not the best browser for us but it's great on other phones
Click to expand...
Click to collapse
That's a shame.
I have another question: what 3rd party app could I use for video recording?
I tried UCam and it didn't work...
Sillik said:
That's a shame.
I have another question: what 3rd party app could I use for video recording?
I tried UCam and it didn't work...
Click to expand...
Click to collapse
I don't need video recording myself so I wouldn't know. But any camera app should work. I've heard good things about ICS Camera on market. Very close to stock camera app as well.
I'm going to be linking my friend this ROM soon-ish (once beta comes out) and she's using a BravoC on Ntelos. What kind of prep would she need to do on the phone before flashing the ROM? Like a wipe script or something to repartition or what? Want it to go as smooth as possible.
cosine83 said:
I'm going to be linking my friend this ROM soon-ish (once beta comes out) and she's using a BravoC on Ntelos. What kind of prep would she need to do on the phone before flashing the ROM? Like a wipe script or something to repartition or what? Want it to go as smooth as possible.
Click to expand...
Click to collapse
just wipe and install as listed in OP but be sure to have a ext partition if you plan to use a script
pawan1993 said:
I don't need video recording myself so I wouldn't know. But any camera app should work. I've heard good things about ICS Camera on market. Very close to stock camera app as well.
Click to expand...
Click to collapse
I tried it and sadly it crashes like the stock app.
Anyone knows of a working camera app that can record video with a working preview?
Sillik said:
I tried it and sadly it crashes like the stock app.
Anyone knows of a working camera app that can record video with a working preview?
Click to expand...
Click to collapse
i think illusion should work
croniccorey said:
just wipe and install as listed in OP but be sure to have a ext partition if you plan to use a script
Click to expand...
Click to collapse
Using scripts is kind of new to me. I've always had devices with a lot of storage for apps. What would you recommend?
cosine83 said:
Using scripts is kind of new to me. I've always had devices with a lot of storage for apps. What would you recommend?
Click to expand...
Click to collapse
I suggest you to use INT2EXT+ with this ROM, take a look HERE.
I noticed that when i install a new app (from the market or an .apk), the system hangs for a while, sometimes it even pop with a system error, but if i select to wait the system then starts to work again, i have installed INT2EXT+ script with a 512 sd-ext partition on a Class 4 8 GB SD card. Could the low SD class can cause this problem? SD read cache is correctly set at 2 MB.
Could you amswer me whats working and whats not working in your cm9 rom? Cant find it
Sense 4 NativeSD
Hello everyone!This is a rom that i've been using a long time now and decided to upload!Its pretty smooth and fast and im pretty satisfied with it...Actualy its a mix of many roms into one...
Working:
Wifi
Gps
Audio
Camera
Headphone
In-call mic
Sd-card
...
Not Working:
Audio Recording
Bluetooth
Video Recording
Kernel:2.6.32_tytung_ics_r3.6
[email protected] #300
Set Nov 17 15:53:34 CST 2012(according to kernel version in settings)
In order to install this rom you need an ext4 partition in your sd card bigger than 1gb...The installation will create a folder named HD2-Sense4.0 in which the rom will be installed..After installation reboot 3 times so the rom settles...It supports magldr,clk,haret...
Im not a developer,im a proud user of hd2 and i like to test things...In this rom i would like to fix the microphone in order to use it in apps like shazaam,gstrings,etc,which gives error "mic is used by another app" but i dont have the knowledge for doing it so any help would be really appreciated...
Credits:Tribulattifather(Trib's Sense 4.1 for HD2-http://forum.xda-developers.com/showthread.php?t=2255056)
dungphp (VILLEC2 2.15.401.100-http://forum.xda-developers.com/showthread.php?t=2318045)
thelonewolf_pav(Common Sense 4.1-http://forum.xda-developers.com/showthread.php?p=42732389,post 278)
Great thanks to all the devs that made this possible and kept our device alive!:good:
Enjoy!
DOWNLOAD LINK: REMOVED
Great ...
Sounds Great ... Will Give It a Try ... Thanks Black Phonix ...
With Best Wishes
Hitman1376
Nice!
I think I saw a ROM like this before in the DesireSense4 Thread....
It looks exactly the same like this, BUT this ROM here is the Smoothest, nicest and bug-free-st ROM that I've ever seen for HD2
BIG THANKS!
Sent from my HD2 with this amanzing new Sense 4 NSD Rom on it using xda app-developers app
PojntFX said:
Nice!
I think I saw a ROM like this before in the DesireSense4 Thread....
It looks exactly the same like this, BUT this ROM here is the Smoothest, nicest and bug-free-st ROM that I've ever seen for HD2
BIG THANKS!
Sent from my HD2 with this amanzing new Sense 4 NSD Rom on it using xda app-developers app
Click to expand...
Click to collapse
Lol last xda post
good job sir, waiting for a lite and most bug free sense 4 like this for a long timewill report later couse i'm just flashing the rom
nice!
will play to get everything important (Bluetooth, ...) working.
this seem,s to be the base stone for next daily sense roms (sense 5 is still far from perfection)
wanted to ask more specifics about rom, but I will study it myself
ok,heres a quick report when I try to open tts server the setting app will crash
Solved and deleted.
I can't get it to install, clk 1.5.2.1, ex twrp recovery 2.6.0.0, i get "error executing binary in zip" from recovery.
checked md5 with 2 downloads (8e27c53ebc69d32c769e003d89532486)
I noticed there is no update-binary-installer, and no aroma files, in meta-inf. Not sure if relevant.
It might be my recovery, will change it later and try again.
this rom uses old binary then, you need to use older recovery
Robbie P said:
I can't get it to install, clk 1.5.2.1, ex twrp recovery 2.6.0.0, i get "error executing binary in zip" from recovery.
checked md5 with 2 downloads (8e27c53ebc69d32c769e003d89532486)
I noticed there is no update-binary-installer, and no aroma files, in meta-inf. Not sure if relevant.
It might be my recovery, will change it later and try again.
Click to expand...
Click to collapse
I have the same problem. I also tried twrp 2.5.0.5 but still no joy. Someone with a tip which recovery could work? Thanks.
Gesendet von meinem Nexus 5 mit Tapatalk
jskenderi said:
I have the same problem. I also tried twrp 2.5.0.5 but still no joy. Someone with a tip which recovery could work? Thanks.
Gesendet von meinem Nexus 5 mit Tapatalk
Click to expand...
Click to collapse
Well either use really old recovery or update the binary
work with 4EXTRecovery and 4EXT above 1Gb.
with TWRP all file in NativeSD is 0
lolerpro8 said:
Well either use really old recovery or update the binary
Click to expand...
Click to collapse
using new update-binary from tytung's rom doesn't work, will try 4ext
Edit; installs using @Xylograph 's (worth a mention) modified 4ext recovery here http://goo.im/devs/Xylograph/Various/Recoveries/NAND
Thanks f0xun0
Edit2; camcorder works with videocam illusion from market, but you have to disable sound recording in settings (tried all available sound settings but none worked)
Excellent job blackphoenix50:good:
Robbie P said:
using new update-binary from tytung's rom doesn't work, will try 4ext
Edit; installs using @Xylograph 's (worth a mention) modified 4ext recovery here http://goo.im/devs/Xylograph/Various/Recoveries/NAND
Thanks f0xun0
Edit2; camcorder works with videocam illusion from market, but you have to disable sound recording in settings (tried all available sound settings but none worked)
Excellent job blackphoenix50:good:
Click to expand...
Click to collapse
Xylo removed the SD version of 4EXT recovery. If you want to find it just google for recovery_4EXT2.2.7_leo_sd.zip. This version works.
Thanks for your rom.
Can we install this rom only sd card as native sd?
I don't install as nand. I have Wp7.8 on nand.
musti35 said:
Thanks for your rom.
Can we install this rom only sd card as native sd?
I don't install as nand. I have Wp7.8 on nand.
Click to expand...
Click to collapse
It should be fine, but be sure to backup first with zune and wp7 backup app just in case of accidents
Anyway to install this to nand?
Well ...
Neurom707 said:
Anyway to install this to nand?
Click to expand...
Click to collapse
Don't Think So My Friend ... It Is a NaitveSD ROM Not A NAND ... But It Can Be Changed Into NAND ... But A Dev Is Needed To Do That :laugh: ...
With Best Wishes
Hitman1376
hitman1376 said:
Don't Think So My Friend ... It Is a NaitveSD ROM Not A NAND ... But It Can Be Changed Into NAND ... But A Dev Is Needed To Do That :laugh: ...
With Best Wishes
Hitman1376
Click to expand...
Click to collapse
what i thought just thought i'd enquire to see if it had being adapted to nand by someone already