Related
Hi, I'm new here so please excuse the newbie-type question...
I recently upgraded my T-Mobile Dash from WM 5 to WM 6. Since doing this, I have been in voice recognition phone number dialing HELL!
WM 6 does not like my voice even though I speak clearly and have never had any problem with any other voice recognition software. There's no way to train the software in WM 6. In addition, there is no dedicated button to activate the speech recognition phone dialiing application and the "home" button that you are supposed to use defaults to the voice recorder application and not the dialer. In order to use the dialer, you ahve to go into the voice recorder application and either record something or play with the settings and press the "done" key to get into the voice recognition dialer!
At this time I am very, very frustrated. I've spent hours with T-Mobile and HTC and no one can solve the problem. Unless Microsoft fixes this "bug," my phone is of little use to me because I dial all my phone numbers with voice recognition.
I'm tryiing to get a copy of a working WM 5 ROM for a T-Mobile Dash Smartphone so that I can turn my phone BACK to operate with WM 5 where I had far fewer problems. I've tried EVERYWHERE to find a WM 5 ROM but NO ONE, not even T-Mobile, HTC or Microsoft has one. I've searched on the Internet for days without any luck. Does anyone have a copy of Windows Mobile 5 ROM for T-Mobile Dash Smartphone that they can share with me?
Thank you in advance
wm5 is posted here many times... shouldn't take long to find it now that you're here.
i'm suprised tmo won't post it since their wm6 sucks so bad. it would save them a lot of returns i'm sure.
also check out htc wm6 since it uses voice tags as well.
I've done a search for WM 5 on this site and can't find it. Do you know who might have a WM 5 ROM to download or where on the site I might find it?
WM 6 to my knowledge does not allow you to "train" the voice tags. WM 6 does not seem to respond well to my voice whereas WM 5 had very few problems once I trained it.
Bytemeister said:
I've done a search for WM 5 on this site and can't find it. Do you know who might have a WM 5 ROM to download or where on the site I might find it?
WM 6 to my knowledge does not allow you to "train" the voice tags. WM 6 does not seem to respond well to my voice whereas WM 5 had very few problems once I trained it.
Click to expand...
Click to collapse
hmmmmm. i was able to find it in about 2 min.
perhaps you need to try some different keywords like tmobile, rapidshare, downgrade etc.
i told you htc wm6 has voice tags... same as the tmo wm5 version.
tmo wm6 uses voice command.
PM me, I have the ROM you're looking for.
Downgrade WM6 to WM5 for the Dash (Excalibur)
Click on the link below, then click dash files, then download this file -
RUU_Excalibur_1.11.531.2_4.1.13.24_02.48.90_T-MobileUS_SHIP.exe
http://rapidshare.com/users/7UE30C
Inoska said:
Click on the link below, then click dash files, then download this file -
RUU_Excalibur_1.11.531.2_4.1.13.24_02.48.90_T-MobileUS_SHIP.exe
http://rapidshare.com/users/7UE30C
Click to expand...
Click to collapse
i downgraded using this website and now my phone wont boot up. it stays on the windows mobile startup screen.
please help
Hi there
Firstly i am a very heavy user of my PDA's but not very technical & apologies for long post, but cant find the answers anywhere else on this site.
Have been using HTC SIM free handsets for approx 4.5 Years now, and been using a HTC TyTN II for the last year, updated the ROM from WM6.0 to WM 6.1 then everything started going wrong so decided to spend the £500 to jump to the HTC Touch Pro 2 but am very frustrated and almost at the point of going back to the TyTN II or going to another brand of phone as none of the software that i had on my TyTN II works with the Touch Pro 2 WM 6.1, as follows:
1. TomTom Navigator 6 does not work but works on TyTN II WM 6.1?
2. TomTom Navigator 7 (Tried it & HTC Confirmed it will not work either)
3. MS Voice Command or any other voice command software does not work
4. Many other MUST HAVE programs i had on TyTN II WM6.1 also will not work now
5. Company supplied software wont work either,
6. It also wont work with my Landrover Freelander 2 PTI kit, so am forced to go back to a BT Headset
Surely PDA software OS 6.1 cant be that different from version 6.0 in my experience with the TyTN II as 6.1 just had small enhancements to 6.0?
I at least need some navigation & voice command software to work on the Touch Pro 2 as it just can not be operated safely whilst moving otherwise, and there is no point in having it in the first place if i can't get these two software types to work, which is a big problem for me.
Does anyone know what software does work, although i think it is the HTC TouchFlo Skin that is the problem with other programs i have tried this weekend, as it does not allow third part software to be displayed on the home screen easily, even google apps toolbar has probs, does this sound feasible?
Can anyone help me out with this or did i buy the wrong phone maybe a Touch Pro would have been better as closer to my TyTN II layout and functions?
Thanks in advance
Alex
alexsimmons said:
Hi there
Firstly i am a very heavy user of my PDA's but not very technical & apologies for long post, but cant find the answers anywhere else on this site.
Have been using HTC SIM free handsets for approx 4.5 Years now, and been using a HTC TyTN II for the last year, updated the ROM from WM6.0 to WM 6.1 then everything started going wrong so decided to spend the £500 to jump to the HTC Touch Pro 2 but am very frustrated and almost at the point of going back to the TyTN II or going to another brand of phone as none of the software that i had on my TyTN II works with the Touch Pro 2 WM 6.1, as follows:
1. TomTom Navigator 6 does not work but works on TyTN II WM 6.1?
2. TomTom Navigator 7 (Tried it & HTC Confirmed it will not work either)
3. MS Voice Command or any other voice command software does not work
4. Many other MUST HAVE programs i had on TyTN II WM6.1 also will not work now
5. Company supplied software wont work either,
6. It also wont work with my Landrover Freelander 2 PTI kit, so am forced to go back to a BT Headset
Surely PDA software OS 6.1 cant be that different from version 6.0 in my experience with the TyTN II as 6.1 just had small enhancements to 6.0?
I at least need some navigation & voice command software to work on the Touch Pro 2 as it just can not be operated safely whilst moving otherwise, and there is no point in having it in the first place if i can't get these two software types to work, which is a big problem for me.
Does anyone know what software does work, although i think it is the HTC TouchFlo Skin that is the problem with other programs i have tried this weekend, as it does not allow third part software to be displayed on the home screen easily, even google apps toolbar has probs, does this sound feasible?
Can anyone help me out with this or did i buy the wrong phone maybe a Touch Pro would have been better as closer to my TyTN II layout and functions?
Thanks in advance
Alex
Click to expand...
Click to collapse
TT 7 Does work with Rhodium, as does VC, everything has it's quirks of config. BT has always been a pain in the ass and requires different settings for different HFPs, Car Kits and A2DPs.
If you wan to kill Touch Flow, go into start/settings/personal/today and untick the TF.
There are plenty of threads and posts that will resolve most of your issues mate.
Search the entire forum, not just the Rhodium section and you'll get the answers you need.
Cheers,
Beasty
From your list of programs I can only confirm that Tomtom 7 DOES work, and it works very well. I'm using 7.915.9196 VGA
I haven't installed much software yet as Ive been a bit busy, but everything I've put on has worked pefectly. Admittedly I only installed stuff that worked on my Diamond which was also wm6.1
alexsimmons said:
Hi there
Firstly i am a very heavy user of my PDA's but not very technical & apologies for long post, but cant find the answers anywhere else on this site.
Have been using HTC SIM free handsets for approx 4.5 Years now, and been using a HTC TyTN II for the last year, updated the ROM from WM6.0 to WM 6.1 then everything started going wrong so decided to spend the £500 to jump to the HTC Touch Pro 2 but am very frustrated and almost at the point of going back to the TyTN II or going to another brand of phone as none of the software that i had on my TyTN II works with the Touch Pro 2 WM 6.1, as follows:
1. TomTom Navigator 6 does not work but works on TyTN II WM 6.1?
2. TomTom Navigator 7 (Tried it & HTC Confirmed it will not work either)
3. MS Voice Command or any other voice command software does not work
4. Many other MUST HAVE programs i had on TyTN II WM6.1 also will not work now
5. Company supplied software wont work either,
6. It also wont work with my Landrover Freelander 2 PTI kit, so am forced to go back to a BT Headset
Surely PDA software OS 6.1 cant be that different from version 6.0 in my experience with the TyTN II as 6.1 just had small enhancements to 6.0?
I at least need some navigation & voice command software to work on the Touch Pro 2 as it just can not be operated safely whilst moving otherwise, and there is no point in having it in the first place if i can't get these two software types to work, which is a big problem for me.
Does anyone know what software does work, although i think it is the HTC TouchFlo Skin that is the problem with other programs i have tried this weekend, as it does not allow third part software to be displayed on the home screen easily, even google apps toolbar has probs, does this sound feasible?
Can anyone help me out with this or did i buy the wrong phone maybe a Touch Pro would have been better as closer to my TyTN II layout and functions?
Thanks in advance
Alex
Click to expand...
Click to collapse
first of all sorry to hear you're having so much issues with the software you need to run on the phone. i have a kaiser/tytn 2 and software from that i have working on tp2. tomtom6 from tytn 2 does not work but tomtom7 defo does. MSVC does work as well but you need to get version compatible with tp2. look in the HTC BLACKSTONE forum as most of the apps from this device work with tp2. please remember that tp2 is WVGA res so that alone may effect the compatibility of some programs. the Blackstone forum is littered with programs that you may need that will work on tp2 and even better! can't really comment on your work software as dont know what it is! good luck with searching!
oh and i know it may be silly but make sure your phone is visible for BT purposes an use phone to pair with your landrover. mine works well with my parrot system with no issues!
shingers5 said:
first of all sorry to hear you're having so much issues with the software you need to run on the phone. i have a kaiser/tytn 2 and software from that i have working on tp2. tomtom6 from tytn 2 does not work but tomtom7 defo does. MSVC does work as well but you need to get version compatible with tp2. look in the HTC BLACKSTONE forum as most of the apps from this device work with tp2. please remember that tp2 is WVGA res so that alone may effect the compatibility of some programs. the Blackstone forum is littered with programs that you may need that will work on tp2 and even better! can't really comment on your work software as dont know what it is! good luck with searching!
oh and i know it may be silly but make sure your phone is visible for BT purposes an use phone to pair with your landrover. mine works well with my parrot system with no issues!
Click to expand...
Click to collapse
What he said!
agreed that WVGA is your biggest problem. install "second today" to solve your problem with things not on the screen because of touch flo.
Hi Beasty
Thanks for tips, now i know what its codename is, it made it easier to find stuff on this excellent site after i saw your and other replies and have since loaded MS VC 1.6 UK Edition which seems to work ok although not tried it yet with my new HTC BT Headset.
In reply to the others thanks for the great info so far, i have tried loading TomTom 7 once again from the MicroSD card and it wont even load, its just says "this version of TomTom 7 is not compatible with this device" when i click "OK" it just terminates. I dont know what version it is till it loads?
A friend of mine this evening says that the closest phone on the TT7 compatability list seems to be the HTC Touch HD, and that CoPilot 7 actually lists Touch Pro2 as a compatible device, so i will have to try that i think and see if it actually does work, and will let you and the forum know
In terms of the work applications, i know they are based on the MS .NET Micro framework and so should work out of the box, but no they dont, but i think it is a screen resolution issue more than anything else.
The other app i need to run ideally is "Nimbuzz" Multi IM app, again for work.
On both of these work related apps i get an intermittent error message, saying "An error has occurred with xxxx appplication, send error report yes or no" when i choose Yes, it loops same message, when i clicked No it loops once then closes.
I removed the "Nimbuzz" application and soft reset, but still get the error message for it which is weird. So if anyone knows of a Multi IM (Inc Skype) which will run on Touch Pro 2 i look forward to knowing about it.
Work funded 50% of my Touch Pro2 purchase so need to get this all working as best i can
Thanks again for the tips, hints, instructions
Alex
shingers5 said:
[...]
MSVC does work as well but you need to get version compatible with tp2. look in the HTC BLACKSTONE forum as most of the apps from this device work with tp2.
[...]
Click to expand...
Click to collapse
Do you know if anyone has been able to get MSVC to work with the TP2 with a bluetooth headset?
I have tried both the US and European versions of MSVC 1.6 with my TP2. It only seems to work with the built-in speaker.
mschaffer said:
Do you know if anyone has been able to get MSVC to work with the TP2 with a bluetooth headset?
I have tried both the US and European versions of MSVC 1.6 with my TP2. It only seems to work with the built-in speaker.
Click to expand...
Click to collapse
haven't tried as dont use bluetooth headsets. can't stand having that bulk in my ear. from what i have read it doesn't work but i can't be certain as not used myelf
Also make sure you install .net compact framework 3.5:
http://rapidshare.com/files/77805623/NETCFv35.wm.armv4i.cab
Hi
Added "Second Today" thanks for that, what a cool app, except got all those nasty recurring error messages that i had big trouble getting rid of.
Have now returned to bog standard WM6.1 having got rid of TouchFlo 3D thanks to Beasty
I like to use what i am used to till i have all the progs i need to be work productive on the move, will then fiddle with TouchFlo 3D laterz
Alex
tomtom 7.450 works well on my tp2
alexsimmons said:
Hi
Added "Second Today" thanks for that, what a cool app, except got all those nasty recurring error messages that i had big trouble getting rid of.
Have now returned to bog standard WM6.1 having got rid of TouchFlo 3D thanks to Beasty
I like to use what i am used to till i have all the progs i need to be work productive on the move, will then fiddle with TouchFlo 3D laterz
Alex
Click to expand...
Click to collapse
No problem sir,
We are all here to help each other, TF3D is a highly usefull interface, just takes a bit of getting used to, 2nd today and TF3D is a great combination especially when you configure one of the softkeys to switch between both.
Multi IM you could try BeeJive, not a lot of experience with this (seem to remember Elite team including it in their Roms) but there are plenty available on the net.
Cheers,
Beasty
Hi All
Got MSVC working on TP2 but not with a BT headset so have just bought the Parrot Minikit Slim with voice dialling, although the voice dialling only works if you can sync the TP 2 with it just like my landrover, but it does not tell you this on the outside of the box.
Guess what? The TP2 is not listed on the Parrot Minikit compatibility list so may have spent/wasted another £70 today as cant sync the TP2 contacts with the Parrot system which is the same prob i was having with my landrover
Alex
alexsimmons said:
Hi there
Firstly i am a very heavy user of my PDA's but not very technical & apologies for long post, but cant find the answers anywhere else on this site.
Have been using HTC SIM free handsets for approx 4.5 Years now, and been using a HTC TyTN II for the last year, updated the ROM from WM6.0 to WM 6.1 then everything started going wrong so decided to spend the £500 to jump to the HTC Touch Pro 2 but am very frustrated and almost at the point of going back to the TyTN II or going to another brand of phone as none of the software that i had on my TyTN II works with the Touch Pro 2 WM 6.1, as follows:
1. TomTom Navigator 6 does not work but works on TyTN II WM 6.1?
2. TomTom Navigator 7 (Tried it & HTC Confirmed it will not work either)
3. MS Voice Command or any other voice command software does not work
4. Many other MUST HAVE programs i had on TyTN II WM6.1 also will not work now
5. Company supplied software wont work either,
6. It also wont work with my Landrover Freelander 2 PTI kit, so am forced to go back to a BT Headset
Surely PDA software OS 6.1 cant be that different from version 6.0 in my experience with the TyTN II as 6.1 just had small enhancements to 6.0?
I at least need some navigation & voice command software to work on the Touch Pro 2 as it just can not be operated safely whilst moving otherwise, and there is no point in having it in the first place if i can't get these two software types to work, which is a big problem for me.
Does anyone know what software does work, although i think it is the HTC TouchFlo Skin that is the problem with other programs i have tried this weekend, as it does not allow third part software to be displayed on the home screen easily, even google apps toolbar has probs, does this sound feasible?
Can anyone help me out with this or did i buy the wrong phone maybe a Touch Pro would have been better as closer to my TyTN II layout and functions?
Thanks in advance
Alex
Click to expand...
Click to collapse
Hey Alex...
I am sorry to hear that you are having so many problems and I have a fix-all solution for you.... I have a posting up in the marketplace, where I am looking to Trade a HTC Titan (Sprint Mogul) and 2 HTC Kaisers (AT&T Tilt's) for 1 GSM Touch Pro 2.... & I can confirm that TomTom 7 works on all 3 (I have the GPS unlocked on the Mogul).... Just think... 3 phones for your 1... What a great deal
Can someone post the link to the UK version of MSVC? I can't see it at the MS site.
I installed MSVC on my TP2 which led to a hard reset, so I want to be sure that I'm using the right version.
Thanks
"...i have tried loading TomTom 7 once again from the MicroSD card and it wont even load, its just says "this version of TomTom 7 is not compatible with this device" when i click "OK" it just terminates. I dont know what version it is till it loads?"
I've exactly this same problem. Does anybody know how to get around this and get it installed?
Wouldn't you know it. 24 hours of bashing my head against the desk trying to get this to work....I add a message to this board and 10 minutes later it works. Just used 7.915.9196 VGA as pointed out by stunno and remembered to look in program files after it was installed instead of repeatedly clicking on the original installer on the memory card.
alexsimmons said:
Guess what? The TP2 is not listed on the Parrot Minikit compatibility list so may have spent/wasted another £70 today as cant sync the TP2 contacts with the Parrot system which is the same prob i was having with my landrover
Click to expand...
Click to collapse
So strange.
I'm using the parrot CK3100, and that's working fine, out of the box.
Just let the TP2 find the Parrot, 1234 as pin, and the TP2 recognizes it as a Hands-free set.
And it automatically started synchronizing.
My parrot 3200LS will not sync the directory either. It just disconnects the bluetooth device as soon as you tell it to sync. It works as a handfree ok, but its a pain to make calls without the directory.
Hi everybody,
I searched the forum and couldn't readily find anything related to this problem.
I loaded EnergyROM_21885_RHODIUM_17.Dec.2009_Titanium.rar today on my new ATT Tilt 2. And then I loaded TomTom Navigator 6.x for the first time on the Tilt2 immediately after the ROM upgrade, so I have very little loaded on the Tilt2 except what came with the EnergyROM package.
I saw the exact same issue posted in an Xperia X1 forum: "The screen doesn't display properly. In portrait the TomTom screen only shows in the top half of the screen, and there are 3 screens showing up next to other, kind of overlaying each one like a deck of cards. In landscape they space out slightly better and the programme is useable, but still it looks terrible, and using the phone as a sat nav in landscape isnt exactly practical. Basically the tomtom display is coming in at like quarter size. Has anyone seen this or know of a fix or settings that can be played around with for it?" IN response, someone theorized: "I think because TT6 is made for devices 320 x 320 and 320 x 240. X1 has a wvga 800 x 480."
Anybody encountered this problem and have a fix? I hope there is an easy tweak for this. I've uninstalled/ reinstalled and soft reset to no avail.
I have a legal copy of TomTom and it's worked fine on 3 previous HTC Windows Mobile devices including my previous Fuze. TomTom tech support won't help because the TP2/Tilt2 is not on their approved list (nothing manufactured in the past 2-3 years is on the list.) I've seen talk of TomTom Navigator 7, but that must not be sold in North America and TomTom is phasing out any support whatsoever for TTN6 I'm told.
Thanks in advance for your help,
Dave
I got the following from TomTom Customer Support:
The Navigator 7 software has only been released in the European market. There are currently no plans to release this software in North America therefore,we are unable to offer support for Navigator 7 customers. We do apologize for any inconvenience this may cause.
For further assistance you are more than welcome to contact UK support. For contact information please click the link below:
tomtom.com/368
(I bought a copy through a UK website.)
yep all your previous HTC phones were supported screen wise. They do actually have an offical tomtom 7 out that supports our phone and you can use that however I dont think it will work with your maps. It only works with the newest maps availabe....
You'll have to upgrade if you want to use tomtom on your phone.
That said.. I'll throw you over some more information but it's not anything you cant find by searching google so I wont clog up the forums with it.
Check your private messages!
HELP !!!
i went to tomtom.com tp2 is nit supported so what do i do now i just dont want to get lost !! gees ? pm is Ok
I feel your pain...I have the same issue with my Tilt 2 with no solution @ this time. No other choice @ this time but to use AT&T Navigator.
Guys (or girls)... a simple search of "tomtom" in the Rhodium "themes, applications and software" subforum will give bring you this thread right at the TOP of the list.
New Tomtom 916.9189 Specifically for TP2 Released
That said... I believe this version only works with some of the newer maps... not the old tomtom 6 versions. Odds are if you are using those your maps are WAY out of date as it is.
I will add that it works perfectly with version 7 or 8 maps. I have been using it since I got my Tilt2 and love it. You will have to update the maps and then reactivate them.
The screen get off during TT navigation
Hello all
I am quite upset as I did not find any solution for weeks. TT7 works fine. Just one very disturbing stuff come up when call ending. Within one minutes the screen get of. All you know that during navigation incoming call interupt navigation screen while you accept the call. Then screen switch back to navigation mode. After hang up, the screen get black in one minute.
Any suggestion please???
Thanks in advance
TomTom Navigator fix for AT&T Tilt 2
I had the same problem as all of you have described with TomTom Navigator 6 not working on my new AT&T Tilt 2. The problem with TomTom Navigator 6 is that it will not support the higher resolution on the newer large screens. I got it to work on my Tilt 2 by installing WVGAFIX4. You can search for it on here on XDA. This app reduces the screen resolution so you can use TomTom Navigator. Make sure you have run this and selected one of the smaller resolutions before you install Navigator 6 on your phone. Sometimes on my Tilt 2 I have to do a soft reset to get it back to the original resolution. TomTom has abondoned us in the US and so far this is the only fix I have found to use Nav 6 on my new phone. Funny they came out with an IPhone app but left out all the windows mobile users.
joedh2 said:
I had the same problem as all of you have described with TomTom Navigator 6 not working on my new AT&T Tilt 2. The problem with TomTom Navigator 6 is that it will not support the higher resolution on the newer large screens. I got it to work on my Tilt 2 by installing WVGAFIX4. You can search for it on here on XDA. This app reduces the screen resolution so you can use TomTom Navigator. Make sure you have run this and selected one of the smaller resolutions before you install Navigator 6 on your phone. Sometimes on my Tilt 2 I have to do a soft reset to get it back to the original resolution. TomTom has abondoned us in the US and so far this is the only fix I have found to use Nav 6 on my new phone. Funny they came out with an IPhone app but left out all the windows mobile users.
Click to expand...
Click to collapse
I take it you missed my post all together a few posts up?
Aaron McCarthy said:
Guys (or girls)... a simple search of "tomtom" in the Rhodium "themes, applications and software" subforum will give bring you this thread right at the TOP of the list.
New Tomtom 916.9189 Specifically for TP2 Released
That said... I believe this version only works with some of the newer maps... not the old tomtom 6 versions. Odds are if you are using those your maps are WAY out of date as it is.
Click to expand...
Click to collapse
Now if you mean so that your super old maps still work.. Yes you'd be stuck with the old tomtom... OR you can just get the newer tomtom and buy the updated maps (as I'm sure roads have changed since the tomtom 6 maps were released years and years ago) or heaven forbid do a search on google and find out where else you can get maps.
I was hoping that Nimbuzz would work better with Skype on the Desire than it did on my Magic but sadly it doesn't. Has anyone got a working VOIP Skype solution using 3G?
Cheers
Aidan
I might be wrong but doesn't FRING work well as a Skype client?
Why doesn't SKYPE themselves have software, or did they used to have but took it away like they did for win mobile?
I used fring on G1 and it worked fine. Didn't have a chance to install it on Desire yet.
Fringe works fine as a messenger on Desire, haven't tried it as a voip client yet.
There is Skype Lite for Android.
You can't use it to make VoIP calls.
Can't you? I'm just about to upgrade my old nokia to a desire but being able to make skype-to-skype calls over 3g is a very important feature for me. I use it often on my nokia. Skype mobile's android website suggests that its possible (at least on Verizon). Perhaps it's more to do with the network than the software? I'm hoping on vodafone in the UK it won't be a problem. What do you think?
Before skype symbian i used both fring and Nimbuzz with limited success. Fine for messaging, but laggy for voip.
I read somewhere that Skype is working on a full version for Android, but I guess you need it now and not later
deaglun said:
Can't you? I'm just about to upgrade my old nokia to a desire but being able to make skype-to-skype calls over 3g is a very important feature for me. I use it often on my nokia. Skype mobile's android website suggests that its possible (at least on Verizon). Perhaps it's more to do with the network than the software? I'm hoping on vodafone in the UK it won't be a problem. What do you think?
Before skype symbian i used both fring and Nimbuzz with limited success. Fine for messaging, but laggy for voip.
Click to expand...
Click to collapse
I made a test call on fring over WiFi. Sounded fine. Might try VoIP tomorrow - a little too late now
Yes Fring is the option atm. it has most of the im's integrated and you can have skype voip, their own or 3rd party. I used it on my WM phone and SE m600 works fine, and my friend using it on the Hero. Can't wait for my Android phone.
And the best thing that Fring implemented video calls over the skype, but not sure android is getting it, except for Evo which has front camera.
Check out the G1 forums, there's a skype app somewhere on there which has been pulled from the 3 Hero. 3 offer free skype to skype calls on their phones and have their own skype (skype branded but i think made by them) app.
It would also probably be in the Hero forums.
brummiesteven said:
Check out the G1 forums, there's a skype app somewhere on there which has been pulled from the 3 Hero. 3 offer free skype to skype calls on their phones and have their own skype (skype branded but i think made by them) app.
It would also probably be in the Hero forums.
Click to expand...
Click to collapse
I think you might find it only works through the 3 mobile 'relay' servers. Worth a shot though.
Hi!
I have a question if its possible to record incoming and outgoing calls on the Desire.
+1 !!!!
2-way phone recording need very much!
Dear All:
001.
Anybody has any positive experience with Ultimate Voice Recorder running on the HTC Desire (in the field of calls recording)?
002.
UVR on N1 seems to have problems with recording of the second party's voice, but on the US market this can actually be an "intentional" configuration/setup of the device.
003.
If same issues are present on the Desire how likely it is to get "fix" like the 2WayRecording? I have successfully used it on my TYTN2 together with Resco Audio Recorder to alleviate second party's voice recording issues.
+1 !!!!
2-way phone recording need very much!
any solution?
Desire and Ultimate Voice Recorder 2.3.4
Hi,
an "In Call Recording function" would be nice to have. I partially was succesful with the Ultimate Voice Recorder 2.3.4 which was able to record the remote person very silent, but still recognizable.
Same problems as I had with Windows Mobile 6: I used to have a T-Mobile Ameo (HTC Advantage x7501, Code name Athena) which would only record the other side's person in speaker mode.
More or less bad luck until now, as I expected Android-devices being superiour in this matter!
Greetings.
shame this, my c905 did it out of the box flawlessly
Hy guys, I just installed on my Desire (Android 2.1) something from the market called vRecoreder.
Used it once running in the background and it recorded my conversation (the recorded volume is kind low, but you understand).
Give it a try.
ps: had to uninstall all my call voice recorders that run in the background.
cnic said:
Hy guys, I just installed on my Desire (Android 2.1) something from the market called vRecoreder.
Used it once running in the background and it recorded my conversation (the recorded volume is kind low, but you understand).
Give it a try.
ps: had to uninstall all my call voice recorders that run in the background.
Click to expand...
Click to collapse
Update: it records .3gpp (hence the bad quality i think) and aparently records only incoming calls. Must test more though.
Two ways call recording is depending upon hardware construction same like wm and symbian. For example if wm, Asus and Samsung can but HTC cannot, whereas if in symbian case, Nokia can but Samsung cannot. This conclusion comes from my long experience with the aforementioned mobile phones. Have not tested with Garmin Asus android yet as it is not available in my market but believe this one can.
grandxo said:
Two ways call recording is depending upon hardware construction same like wm and symbian. For example if wm, Asus and Samsung can but HTC cannot
Click to expand...
Click to collapse
I'm sorry, but I have an exception on that theory right here.
My Touch Diamond wouldn't do a two way recording whatever I tried. Until I switched to a custom (WM6.5.1) ROM, there it worked fine. So no hardware issue, it was a ROM issue.
Sandeman1976 said:
I'm sorry, but I have an exception on that theory right here.
My Touch Diamond wouldn't do a two way recording whatever I tried. Until I switched to a custom (WM6.5.1) ROM, there it worked fine. So no hardware issue, it was a ROM issue.
Click to expand...
Click to collapse
I second this, as in a few Win Mobile threads discussed (no link at hand, sorry) there are registry values to be manipulated for successful two-way-voice recording. As far as I remember Microsoft and HTC stated that being NOT possible to record 2-way (without speaker mode), were hardware (design!) related facts and decisions made - until someone figured it out otherwise, by accident! (As a prior Win Mobile user: praise him!)
Not being able to record calls in Android phones is really sad.
The Palm system was able to do it from day one.
In fact the largest selling single piece of software for a smart phone ever is
Qmobilsoft's "Callrec" for palm.
So what does that say for a needed feature.
P.S. The Palm OS is now over 15 years old.
forcemaker said:
I second this, as in a few Win Mobile threads discussed (no link at hand, sorry) there are registry values to be manipulated for successful two-way-voice recording. As far as I remember Microsoft and HTC stated that being NOT possible to record 2-way (without speaker mode), were hardware (design!) related facts and decisions made - until someone figured it out otherwise, by accident! (As a prior Win Mobile user: praise him!)
Click to expand...
Click to collapse
It worked on my Touch Pro2 as well, but seems as though the stock rom was on there for around 10 mins i dont know if it worked out of the box or not.
AirVoice claims to be able to do this. Unfortunately in my experience it just doesn't
Hi falks!
The situation is easyer, then you think.
The hardware and the software are ready to record 2way the phone conversations. We have only one problem: we doesn't have any software, which would do it for us.
At this time is the only solution the Ultimate Voice Recorder, which records the outgoing voice perfect, and the incoming voice very quiet.
Total Recall is the other software, which could be able to do this feature, unfortunatelly it does it only under 1.6, so on our phone - HTC Desire - doesn't works.
For the moment... maybe turn the speakerphone on... and record the whole conversation with another phone! Hahaa... lmao!
is there apps for 2 way rec
or only wish centar
Sandeman1976 said:
I'm sorry, but I have an exception on that theory right here.
My Touch Diamond wouldn't do a two way recording whatever I tried. Until I switched to a custom (WM6.5.1) ROM, there it worked fine. So no hardware issue, it was a ROM issue.
Click to expand...
Click to collapse
Agreed but I had HTC Touch Cruise too and did adjust the registry value up to 5 in the Sound Categories using Memmaid software. The incoming call recording improve but very slightly indeed and is too far to compare with the clear quality from my Samsung i780 using Vito audio note in non speaker phone for both. Finally sold the HTC out and bought Asus P552w and very happy with the unit. Suggest to know and choose the right hardware from the start otherwise one has to learn how to play with registry or cooked rom and run the risk of losing warranty if does not know how to flash back the official rom.
malmosyd said:
Hi!
I have a question if its possible to record incoming and outgoing calls on the Desire.
Click to expand...
Click to collapse
No one here can confirm that Desire can do this yet. Samsung Spica and Galaxy S are reported to fail to record incoming call