Related
The title pretty much says it all. I tried searching and didnt find a matching issue....I have a Tilt2 (ATT) stock rom.
Yesterday I had issues with hotmail via Windows Live. I would log in and the folders/mail would sync fine. The very next action I took using data would fail (sending an email, another sync/send/receive, using IE-Opera, facebook). The action/request would timeout with a "no network connection".
Most of the time I can access the web/mail by recycling the power. But as before, it quickly loses the connection again.
I spent over an hour with support and tech yesterday. No answers or ideas, just a suggestion I have the device switched out with the ''warranty" dept (which would make it my 5th Tilt2!!!!).
I'm actually waiting to see what android phones come out. I love the keyboard, but dont want to install a custom rom for fear of voiding the warranty and have way too many issues. In the meantime, any ideas on my network issue would be most appreciated.
bump.....
No ideas at all???
Try a FULL HARD RESET.
To perform a hard reset
Access the Settings Tab>All Settings>System>Clear Storage
Follow the onscreen instructions.
OR I believe it's pressing the SEND/END key + Holding down the POWER button and hitting the reset hole should do it. Then VOLUME UP button when asked 'are yo sure' --or something like that.
Let the PHONE install whatever it needs. Once stable, try setting up 1 email account and see what happens.
Hi everyone... as i'm pretty much stuck with my device... i'm gathering all the information we have found on the hotkeys.
Yeah, i'm so bored to try random key combination...
And yeah (2) there are some new key combs... (ha!).Anyone brave enough can help booting with the remaining keys hold.
Tested keys (pair): q , w, r, m, b
Enter APX mode (Nvidia flash)
Hold U+S+B+ Power
Prints nothing, enters APX mode
Enter Ms Pink Bootstrap mode (aka SBL mode)
Hold L+S+ Power
Prints nothing, enters SBL mode
Clear Storage memory (reset phone)
Hold C+B+ Power
Prints a Phone image (and reboots)
Unknown, possibly downgrade the phone to original OS
Hold R+B+ Power
Prints a "reboot" arrow (and reboots)
Was reading up on Fuses, Lock Bits, and idenitified the Samsung moviNAND 8GB is part "KLM8G4DEDD-B101". Using the Samsung's Decoder pdf, found "S3C49VDX01 Controller" so did a google search and found this website
http : / / forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S_Series
There's a few modes on that galaxy phone. The button combinations probably won't work but if you are bored, try them out.
Not so bored but, they dont work. This mobile is a PITA wherever you look at it.
I did the "R+B+power" on my KIN TWOm and i got the reboot screen, then i got a screen saying "Updating modem Please do not remove battery." i got scared and took out the battery. then when i put it back it it said the updating modem thing again and i just let it sit, it finished rebooted then asked me to set up my phone and it was asking me for my windows live email, but it wasnt working so i click setup later. I had the kin studio on my KIM TWOm of course it didnt work but this might help someway.
Interesting, maybe it's a kind of restore hotkey (who knows hehe).
My problem is that it doesnt work removing the battery (removing for a little time) or letting it update (i left it about 2-3 hours updating and autoresetting till the battery died).
Maybe you could connect to verizon and get the OTA update.
If you didnt have the Loop (for kin studio) before, it just mean, as expected, that the kin twom is just a kin two with a software update removing loop and restore-able with this hotkey.
I do not recommend its use though
I now have the original KIN software on my phone using this method. Irritating that it will not sync with my hotmail, most likely because of no cloud server connection. I have lost all of my contacts.(thank god for the facebook phonebook) The spot is convenient. I find it interesting that the phone still retains the original OS.
If the original software is back, can't you use Microsoft Exchange Active Sync to synchronize contacts? Have you lost other stuff, like Zune music, etc?
I have a couple of questions:
Since you now how the original OS on the phone ...
How does it show up on the Verizon network? Is it still being seen as a Kin Twom or the original Kin Two that required data?
Is the Wifi and built in Facebook app working correctly?
Can you forward video through MMS using the Kin Stop?
I just wish there was a way to get some direction from Conflipper. It really did look like he found a way to get deeper into the original OS, even though he said he hadn't found a way to dump the ROM.
amlex said:
I have a couple of questions:
Since you now how the original OS on the phone ...
How does it show up on the Verizon network? Is it still being seen as a Kin Twom or the original Kin Two that required data?
Is the Wifi and built in Facebook app working correctly?
Can you forward video through MMS using the Kin Stop?
I just wish there was a way to get some direction from Conflipper. It really did look like he found a way to get deeper into the original OS, even though he said he hadn't found a way to dump the ROM.
Click to expand...
Click to collapse
Not quite sure of the first question.
The wifi works but the loop does not because I can not finish set up, when trying to sync with my hotmail it displays a message that it cannot connect to windows live.
Yes the Kin Spot works wonderful.
I'd like to add that videos do not work.
Feed Reader will not refresh my feeds.
OTA update does not work almost everything requires a connection to the KIN server that does not exist anymore.
Rebooting Kin ONEm
Update on R+B+Power Button.
1. I performed this on a KIN ONEm, NOT a KIN two. I recommend that the forms be combined as efforts to hack both devices are very similar.
2. To answer a previous question: NO, ACTIVE SYNC DOES NOT WORK WHEN LOADING THE OLD KIN ONE SOFTWARE. HOWEVER, it does not seem to work because an error message pops up and says:
----------------------------------------
NO DATA PLAN
Your plan doesn't support Exchange sync.
----------------------------------------
SO: for people who want it, I would be interested in knowing if anyone with a KIN ONEm does the software reset and then asks Verizon for the plan. It could possibly work.
3. A DISCOVERY: pressing the R+B+Power a second time on boot kicks the software back to the "m" (as in ONEm) mode. I don't know if it's the same for the TWOm... but I bet it is. In any case, if you want to play with the original software, there seems to be a way to get back easily. FYI: It took me a couple times to do it right... and there is a pause before you get the updating modem screen and after you see the return arrow symbol. Be patient and try a couple times.
4. FACEBOOK and TWITTER and WINDOWS LIVE all do not seem to work either, giving various messages about "try again later" or "cannot connect." I wonder why. I expected the facebook address book to work re: an earlier post. I could not get it to work.
FYI: I decided to keep the "m" software as the studio does not exist anymore. For all of us too cheap to buy the data plan, I guess we don't have a big excuse to be too cheap to go to the verizon store to get our contacts synced up once in a while. To do this, I bitpimed my contacts to my old phone and then brought the old phone in. If anyone can figure out how to renable active sync or simply upload contacts - great, but until then, I may have to switch back to my old phone.
Thanks for the info posted above. It's good to know that this hotkey lets you switch and switch back to the old version (well, "m" version).
The only thing i dont like is the "update modem" (or OTA update) need, cause it probably means that you depend on verizon to get things done (like B+R+Power + get OTA).
R+B+power doesnt work on my phone?
When i try the button combination it just brings up the normal message of "Turn off? your phone will turn off now" It doesn't reboot like everyone says it should? one thing i should add is this phone a little different from the first kin twom, i'm not sure how but when i went to verizon to get a warrenty replacement the lady said "we need to send you a kin twom..two" confused i said "this is the second version?" she said "no its newer.. it's hard to explain" the only difference i can tell so far is that on model number there is no longer a hand stamped M after it. It's printed on the sticker. so maybe i'm stuck with an even more locked down phone?
BenDyer said:
When i try the button combination it just brings up the normal message of "Turn off? your phone will turn off now" It doesn't reboot like everyone says it should? one thing i should add is this phone a little different from the first kin twom, i'm not sure how but when i went to verizon to get a warrenty replacement the lady said "we need to send you a kin twom..two" confused i said "this is the second version?" she said "no its newer.. it's hard to explain" the only difference i can tell so far is that on model number there is no longer a hand stamped M after it. It's printed on the sticker. so maybe i'm stuck with an even more locked down phone?
Click to expand...
Click to collapse
You have to turn your phone off and then turn it on using the button combination to reboot.
mooing said:
Update on R+B+Power Button.
3. A DISCOVERY: pressing the R+B+Power a second time on boot kicks the software back to the "m" (as in ONEm) mode. I don't know if it's the same for the TWOm... but I bet it is. In any case, if you want to play with the original software, there seems to be a way to get back easily. FYI: It took me a couple times to do it right... and there is a pause before you get the updating modem screen and after you see the return arrow symbol. Be patient and try a couple times.
Click to expand...
Click to collapse
Hey I'm wondering if you lost your contacts when you booted back into the kin "m" mode. When you went into the original software, you lost your contacts. Now when you booted back into "m" mode, did you lose your contacts as well? Also, did you lose anything else? I want to test this with my kin twom but at the same time, I don't want to lose everything I have. Thanks
corey124 said:
You have to turn your phone off and then turn it on using the button combination to reboot.
Click to expand...
Click to collapse
oh jesus, all that did was do a factory reset. I lost everything, and it's still the twom software.. now i'm confused
BenDyer said:
oh jesus, all that did was do a factory reset. I lost everything, and it's still the twom software.. now i'm confused
Click to expand...
Click to collapse
It should have given you the original kin software?
I guess that doing it just for fun is kinda stupid.
Be ready to lost everything and/or **** the phone testing random things. You were advised.
corey124 said:
It should have given you the original kin software?
Click to expand...
Click to collapse
I've gotten the same error. It didn't give me the original Kin software. It simply did a hard reset and deleted everything off of the device. It showed the arrow however, afterwards it simply booted up into Kin. Nothing came up hat said upgrading or anything. Could there be a KinTwoM - 2 that doesn't even come with the original Kin Two software? If it'd help I'll post a video on what happens.
fazi13 said:
I've gotten the same error. It didn't give me the original Kin software. It simply did a hard reset and deleted everything off of the device. It showed the arrow however, afterwards it simply booted up into Kin. Nothing came up hat said upgrading or anything. Could there be a KinTwoM - 2 that doesn't even come with the original Kin Two software? If it'd help I'll post a video on what happens.
Click to expand...
Click to collapse
It is possible, I've heard of a second generation kin twom. So maybe you have the unfortunate problem of having one, which may exclude you from future hacks.
Well R-B-Power works.....but you lose everything
So curiosity got the best of me last night and I tried the r-b-power method to update the modem and then boot into the original kin os with the kin spot and everything. The only down side is that I lost everything on my phone. Which really, other than a few photos (and the pain of having to add all my contacts again) really isn't that bad. By the way, my Kin is the Kin TWOm with a hand-stamped "m" underneath the battery, so I guess it would be called "first gen Kin twom". It booted back to the normal kin os after I did r-b-power and my phone was still activated. So anyone with a 1st gen Kin twom can try this, just be warned that you lose EVERYTHING.
EDIT: THIS IS NOT ACCURATE! If YOU use this process to repair phone make sure to choose your correct model. Sorry, apparently the rep I spoke with was a bit overzealous about me returning the phone, or was mistaken. NO ICS yet. it merely restores gingerbread. It was neither confirmed nor denied to hit in November.
Dear Adam,
Thank you for contacting Sony Xperia™ Online Support.
To unlock your phone from the Pattern Lock, please follow the steps below:
Download PC Companion
Turn the phone off and disconnect it from the computer. Run the Software.
1. No matter what the program says do not connect the phone until you complete step 9.
2. In the welcome screen if asked click on Start, next you will be shown what Media Go offers, click on "next" then you will see a presentation on what Support Zone offers, click on "Finish".
3. In the next section from "Support Zone” and "Media Go" new select “Support Zone" and click on start.
4. On the next page select "Software Update" and click on "Start".
***At this point if you get an error stating that "unable to install update components" or "server is busy”, please proceed to step 12.
5. The program will say that there is no phone connected and will ask you to connect but disregard that and instead choose the option to "Repair Phone". (The program will issue you a warning on the content that you will lose during the update). Please be aware that any data saved only in your phone memory will be erased as part of the Phone Repair.
6. Choose Continue.
7. After that, the program will download the necessary information (several minutes) and it will present you with a list of phones.
8. Choose the X10 from the list (close to the bottom of the list) by clicking on the icon for the phone. Then click on "Next". Then you will see a new section telling you how to connect the phone. (Don't connect it yet!).
At this point the phone must be off and disconnected from the PC.
9. Connect the cable to the PC but not to the phone, then while pressing and holding the back key (the one on the lower right part of the screen that has the icon of an arrow pointing to the left on top) Connect the cable to the phone and keep holding the back key until the program says "The update of your phone has started..." (In some cases a message of "Installing drivers" will appear before the message of "The update of your phone has started..." is shown.).
10. If the steps were not followed exactly the phone will turn on and it will request that you "Proceed with the following steps, slide down the notification bar". If this happens disconnect the phone from the cable, turn it off and repeat from step 9).
11. If PC Companion proceeds correctly with the update it will tell you to release the back key. Wait for the update to finish and follow instructions on the screen.
12. If you receive the message: “Unable to install update components".
a. Close PC Companion.
b. Install Java
c. Start Pc companion again and try to do the software unlock process once more
As part of Sony Mobile's commitment to excellent customer service, we offer a wide variety of mobile products to suit your lifestyle. If you require more information, or have any other questions, please visit NOLINKSALLOWED or call us at 1-866-766-9374.
Kind Regards,
Joseph
Sony Xperia US Customer Services
Apparently these are the instructions to update to ICS, directly from Xperia support. I managed to brick my phone having it plugged in before step 9. I am currently waiting on a callback for a walkthrough of the process from the same rep. He has the LT28at and ICS already. He told me he was having me update to ICS when I told him I was just going to return the phone and wait for an ICS release device. ICS on the LT28at is available through sony, just not at&t yet. Hope this helps everyone who was as frustrated as I am with battery life and many other UI issues.
Well let us know if you get ICS on yours I think you may brick yours because you chose X10
Will do. still waiting on the callback. All I know is those were the instructions he sent me. I will post the results for sure. He should be calling in about an hour or so. I'll try to post the results before I go out tonight.
If he said it worked for him I'm down to go home and try it out..
Sent from my LT28at using xda app-developers app
Just spoke with another rep. The previous rep was mistaken about the public availablility of ICS, while sony employees are allowed to have ICS on the Ion. Consumers are not. Sorry for the mistake. Easy to get excited about this stuff.
What was the solution they gave u for ur pretty brick?
Sent from my LT28at using xda app-developers app
Hmm maybe I'll try this when I get home from work.
DON'T DO IT. I verified from another sony rep it would have bricked the other one. As for the first brick, they replaced it. Free of charge. But they had verified he gave me bad instructions. And the phone had a bad processor, only had it for 3 days, couldn't even charge it while the phone was on at all.
Has anyone else had issues charging their Ion when it is on? Both of mine would drain when charging even if it was powered on screen off.
Mine seem to take a while to charge up. In an hour, it only reaches ~30-40%. Maybe defective? This is both from my pc and from a power outlet.
I am currently using AnTuTu battery saver. which "seems" to be working, though I haven't verified that yet. It also seems that with every charge it holds a bit more juice. Likely due to it being Lithium Polymer as opposed to Lithium Ion. I can see that with ICS the phone has alot of potential. Does your Camera Quick Launch work though? Additionally alot of videos are displayed improperly, operating as if it were displaying HDMI, most of the image stretched or off screen.
Ok its not note2 specific just that I have a note 2....
I need to create an app that can read a text, send a text, and read/write a file from an external usb stick, it sounds easy but.....
So I'm open to suggestions as to what IDE/toolchain I should be aiming at, I have wrote ''an app'' that does this, but its actually in picbasic and runs on a pic 18f2550 with a serial modem and internal flash
I want to do away with the pic/modem and just an android phone.
One other thing, the file on the usb stick, the usb stick isnt, its actually a controller for other hw devices, i just make the controller appear to usb as mass storage as that makes a simple text file an easy way for it to communicate, if its possible...I'd sooner make the controller appear as a serial coms device like the 9600 8n1 standard but I dont know if i could get away with that via OTG where as I know OTG can read write a text file..
I haven't started playing with it yet, but you might find Intellij Idea to be a tool you can learn to use.
For Open Source Projects it's free.
Grant Barker said:
I haven't started playing with it yet, but you might find Intellij Idea to be a tool you can learn to use.
For Open Source Projects it's free.
Click to expand...
Click to collapse
Thanks, I'm not too bothered what I write it in anything from C to zx81basic would do the job, its just getting it into a form the phone can execute
..
Just wondering if you tried using google for your question.
-----
I would love to help you, but help yourself first: ask a better question
http://www.catb.org/~esr/faqs/smart-questions.html
If I were you, I would check out Tasker on the play store. Theres a huge following with tons of available and customizeable profiles.
If you haven't heard of it, it's an extremely powerful app that allows you to write (or apply) various profiles to automate almost anything, whether youre a beginner or advanced user.
http://tasker.dinglisch.net
spycedtx said:
Just wondering if you tried using google for your question.
-----
I would love to help you, but help yourself first: ask a better question
http://www.catb.org/~esr/faqs/smart-questions.html
Click to expand...
Click to collapse
I half agree, but for a generic question like this, it's much more effective to ask in a community of mobile enthusiasts who might have a little more insight. Imo.
Sent from my SGH-T889 using Tapatalk 2
Thanks guys, I just had a look at app inventor and it made me want to cry...
I'm used to c/basic/asm (dare I say cobol, well i am 46....) so anything drag and drop I find infuriating/restrictive/non intuative, even tough there supposed to simple to use, I find them not...
you will no doubt be aware of such apps as prey, find my droid, wavesecure, they all can read an incoming text for a keyword and if present perform an action, thats similar to what i am trying to achive, well its part of it etc
easiest way to simplify this is imagine a lighthouse for boats, I need to be able to send a message to my phone at the top of a lighthouse, to turn the light on. I also need to be able to query the light status.
now doing this with a arduino/pic and a bag of relays was no biggy, what was the issue was the phone was connected via its connector running serial data at 9600 and modem AT protocols from the 1970's....
this all worked fine, 100% working, but the phones had the issue that after a random amount of days they would stop responding to commands, but would say 'ok' to every command given...
so replaced with a modem module and a seperate 2 line lcd, this worked fine, but put the cost up....
so decided that as old android phones with damaged screens are often very cheap, and most support OTG, the way is open to try doing this once again, using the phone to receive a text, reply to the text, and control the light by writing out a txt file to the ''usb mass storage stick'' thats simply light.txt and is a txt file containing the word 'on' 'off' or 'status'
The pic controller which is happy to pretend to be USB storage, and look for this file, and take the required action, if it sees 'on' or 'off' it simply toggles a pin to on or off, if its 'status' it sense the light, and creates a file of answer.txt with 'yes' or 'no' as content
the app can look for the answer.txt, and depending on it being 'yes' or 'no', send a replay text with 'ok' or 'bring a spare bulb'
of course I dont have a lighthouse, but you see what i'm trying to achive with an android phone over the old working but unreliable T68i (I have a few of them about a dozen left I think, all have same firmware bug)
Wow. I hope you're not making anything dangerous. SMS text `cancel'. SMS text `bang'.
Seriously though, I'm 44. So respect to any middle-aged dudes in the house. :good:
Grant Barker said:
Wow. I hope you're not making anything dangerous. SMS text `cancel'. SMS text `bang'.
Seriously though, I'm 44. So respect to any middle-aged dudes in the house. :good:
Click to expand...
Click to collapse
Lol no its a replacement for a circuit that of all things originally started with a motorola startac and a relay across button '5' to dial help
I dont want to be too open about the 'final design' as I want to present it to the forum as a working prototype that others can copy/use and dont want beating to the finish etc.
I've put many years of work into this on and off, even bought 20 2nd hand phones for the 'beta test' which then 'cancelled' due to the phones not being able to be left on 24/7 without locking up, and i killed a few making them 'battery free' and some more making a reboot circuit that just pulled power which they didnt like happening too often, so I abandoned it till now, I now think I'm onto a winner with the new 'design'
Hello, I really hope somone can help with this problem - I know the obvious answer is to get the screen repaired but I cant afford it. I've tried looking at other posts as well but am not getting anywhere.
Last year the screen went on my OP3 after being dropped and the screen is now blank with quite a few cracks. The phone still works - all the buttons work and I think I've even managed to enter the PIN. I now need to retrieve a file from the phone.
The phone hasn't been rooted or modded in any way (it's as it came from the factory). When I plug it into my PC i can see the drivers folder and the 5 files in there, but nothing else.
I was hoping I could access the phone remotely but OTG was not enabled, though I did in the past enable developer options. I believe hope is not lost, as the phone can be put into fastboot (or something like that - I'm not terribly techy but can work things out) but without being able to see the screen..... I've looked ADB devices and there's nothing after "list of devices attached".
Is there any way of being able to do something? I've looked for screenshots to see if I can operate the phone blind, but can't find anything. I am patient and will keep trying until i get it or save the money for a repair, but I really need the file asap. The phone itself isn't important to me (I've replaced it since) - only the data on it.
Very grateful for any help anyone can offer.
edit: Wifi enabled solutions are not an option sadly as I've changed my ISP since so can't amend the settings on the phone (unless I get extremely lucky)
You're screwed, just buy another screen.
It will be easier to just lend a money.
Rwjk said:
Hello, I really hope somone can help with this problem - I know the obvious answer is to get the screen repaired but I cant afford it. I've tried looking at other posts as well but am not getting anywhere.
Last year the screen went on my OP3 after being dropped and the screen is now blank with quite a few cracks. The phone still works - all the buttons work and I think I've even managed to enter the PIN. I now need to retrieve a file from the phone.
The phone hasn't been rooted or modded in any way (it's as it came from the factory). When I plug it into my PC i can see the drivers folder and the 5 files in there, but nothing else.
I was hoping I could access the phone remotely but OTG was not enabled, though I did in the past enable developer options. I believe hope is not lost, as the phone can be put into fastboot (or something like that - I'm not terribly techy but can work things out) but without being able to see the screen..... I've looked ADB devices and there's nothing after "list of devices attached".
Is there any way of being able to do something? I've looked for screenshots to see if I can operate the phone blind, but can't find anything. I am patient and will keep trying until i get it or save the money for a repair, but I really need the file asap. The phone itself isn't important to me (I've replaced it since) - only the data on it.
Very grateful for any help anyone can offer.
edit: Wifi enabled solutions are not an option sadly as I've changed my ISP since so can't amend the settings on the phone (unless I get extremely lucky)
Click to expand...
Click to collapse
Unless you enable 'USB Debugging' in Developer Options and install the required drivers, your phone will not be 'seen' by your PC. Without your phone being 'seen' by your PC, nothing can be done.