Hey guys,
I've scoured the forums and was wondering if anyone has any information on unbricking a htc desire, nothing works on it, when plugged into the mains a orange led comes on and when i try and press the power button the led goes out, although when i plug the device into my computer it connects via usb as a adb device i've tried hard resets and fast boots but both dont work. is there a command i could use to kick it out of ADB mode?
anyway thanks guys
Soapysoap93 said:
Hey guys,
I've scoured the forums and was wondering if anyone has any information on unbricking a htc desire, nothing works on it, when plugged into the mains a orange led comes on and when i try and press the power button the led goes out, although when i plug the device into my computer it connects via usb as a adb device i've tried hard resets and fast boots but both dont work. is there a command i could use to kick it out of ADB mode?
anyway thanks guys
Click to expand...
Click to collapse
Please post more data about the phone.
Have you tried booting into hboot or fastboot ?
http://developer.android.com/guide/developing/tools/adb.html
adb shell reboot might get you out of adb.
I don't know but maybe adb logcat might help you diagnose the problem.
Perhaps this is USB brick?
http://forum.xda-developers.com/showthread.php?t=691639
ok i've tried kicking it out of adb mode and that doesnt work it doesnt see the phone, but in device manager it says "android composite adb interface" and i dont know if its a usb brick the phone wont turn on for me to find out
Related
Well, I've been having some issue with signal on my desire so I won't to prove it wasn't the rom I was using. I downloaded the offical htc rom and started flashing it. It got so far then hung waiting on the bootloader... after an hour it was still waiting.
I pulled the battery and now it won't boot. It vibrates but nothing else.
If I remove the battery and put it in again, when I connect the charger the led comes on. If I turn it on with usb connect the pc seems to see it but I con't do anything with it.
ANY IDEAS????
can you connect with adb ?
Never used adb... only ever used fastboot but It won't enter bootloader to get there. If you can let me know what to try i'll give it a go.
googled it,
adb kill-server --> OK
adb wait-for-device --> nothing
adb reboot-bootloader --> nothing
Do a search for SLCD brick. There is a extensive tutorial on how to fix that.
Sent from my HTC Desire using XDA App
So short story, my galaxy nexus's power button doesnt work anymore. It stopped working for no reason yesterday, yet when I plug it into the charger the charging screen comese on. I want to be able to power my phone on so that I can get all the information onto my computer so that I can easily transfer stuff to my new phone (replacement gnex coming tomorrow) Is there a way I can turn on my phone without using the power button? Any help would be much appreciated.
If you've got the SDK or just ADB available, you should be able to use the command of "adb reboot" to get the device to boot up. Could be wrong.
Can someone guide me in the direction I need so I can do this adb reboot?
chantheman525 said:
Can someone guide me in the direction I need so I can do this adb reboot?
Click to expand...
Click to collapse
Download the ADB file (usually bundled with Fastboot) from any one of these guides that requires it. Or just Google for it.
Unzip all of that, use command line to get into it's directory, hook your phone up over USB, and type:
Code:
adb reboot
Again, not sure if this will work when the phone is off. If it will work, I think you had to have USB debugging turned on. Its not working for me currently on OSX. So I don't think it will. Maybe there's a different ADB command that can help you.
Its a long shot. There are probably better options.
I'd agree with adb reboot if your computer will recognize it from this mode...
Use the guide linked in my sig to set up ADB if you need.
I'm a newbie to all this, but I don't think anyone here mentioned the necessary step of downloading and installing your phone's specific ADB drivers to your computer.
So, to recap:
Download your phone's ADB drivers on to your computer and install them.
Plug your phone in.
Go to your command prompt and type 'adb reboot'.
I think. I'm new, as you can see by my post count and thanks meter.
I tried to adb reboot. Unfortunately the galaxy nexus cant be recognized when the phone is off. Disappointing but not the end of the world. Thanks for everyones help.
If adb works in download mode you could make a jig to get you there.
Sent from my Galaxy Nexus using Tapatalk
I rooted my Kindle Fire about a month ago with KFU. Everything was fine until I turned it on one day and I got stuck at the Triangle screen. None of the reboot tricks work. The interesting thing which I think is what is stopping me from being able to successfully use other methods is that when I plug my Kindle Fire into my computer via usb, it connects, and then disconnects (the USB) about 2 seconds later. I've tried different ports, etc. Any help on this issue would be greatly appreciated. I've read over multiple things, but don't see a mention to the kindle being disconnected via usb so quickly, thus stopping me from being able to do anything.
Care to elaborate on what "reboot tricks" you've used?
What version of Windows are you using?
soupmagnet said:
Care to elaborate on what "reboot tricks" you've used?
What version of Windows are you using?
Click to expand...
Click to collapse
I've tried the rebooting the Kindle while trying to reset the kindle to booting "normally" within the KFU. I've tried holding down the power button on a reset, then pushing it again until it is orange, none seem to work. I'm confident I could get it to work again if the kindle did not disconnect from my computer so quickly. By this I mean I hear the "usb chime" when I plug it in, then within seconds the disconnect chime plays. During the brief few seconds it is connected, it shows up on my devices list, but obviously when the usb disconnect chime plays, it disappears off of the device list.
edit: I'm using windows 7 Ultimate.
Can anyone help me? I may add that My Kindle Fire was originally rooted with the KFU and worked perfectly fine. I literally turned it on one day, and it got stuck at the triangle screen. The connection issue of it disconnecting so quickly is what is stopping me from fixing it I believe. Please help.
ErikV55 said:
Can anyone help me? I may add that My Kindle Fire was originally rooted with the KFU and worked perfectly fine. I literally turned it on one day, and it got stuck at the triangle screen. The connection issue of it disconnecting so quickly is what is stopping me from fixing it I believe. Please help.
Click to expand...
Click to collapse
Read the first 3 posts here...
http://forum.xda-developers.com/showthread.php?t=1552547
Figure out what device drivers are getting loaded when the connect "chimes" sound in Windows. If you confirm that they are correct based on the contents above, you must stop the temporary fastboot, set the bootmode to normal using fastboot, and restart the device.
I suspect you've got more issues than just getting stuck on the bootloader though... If you are getting disconnect tones in the bootloader, that means it's attempting to boot into something, but obviously unable to do so.
kinfauns said:
Read the first 3 posts here...
http://forum.xda-developers.com/showthread.php?t=1552547
Figure out what device drivers are getting loaded when the connect "chimes" sound in Windows. If you confirm that they are correct based on the contents above, you must stop the temporary fastboot, set the bootmode to normal using fastboot, and restart the device.
I suspect you've got more issues than just getting stuck on the bootloader though... If you are getting disconnect tones in the bootloader, that means it's attempting to boot into something, but obviously unable to do so.
Click to expand...
Click to collapse
The disconnect tones are from my computer, the same tone when you unplug a usb (since the kindle is plugged in via usb) I can't change the bootmode because the usb disconnect chime happens literally 2 seconds later, and the kindle is disconnected, all the while the kindle is still on and showing the triangle screen.
ErikV55 said:
The disconnect tones are from my computer, the same tone when you unplug a usb (since the kindle is plugged in via usb) I can't change the bootmode because the usb disconnect chime happens literally 2 seconds later, and the kindle is disconnected, all the while the kindle is still on and showing the triangle screen.
Click to expand...
Click to collapse
Have you checked to see what drivers are getting loaded? Do you know what device should appear in the device manager? Have you tried to stop the temporary fastboot countdown? Do you know how to stop the temporary fastboot countdown?
If you aren't willing to try out my suggestions, there's not much else I can do.
kinfauns said:
Have you checked to see what drivers are getting loaded? Do you know what device should appear in the device manager? Have you tried to stop the temporary fastboot countdown? Do you know how to stop the temporary fastboot countdown?
If you aren't willing to try out my suggestions, there's not much else I can do.
Click to expand...
Click to collapse
Yes to all those things. The device does indeed pop up in the device manager but only for the brief 2 second window before it disconnects. I've tried multiple usb ports on my pc with the same result. The kindle does not power off in any way when the it disconnects from the pc.
ErikV55 said:
Yes to all those things. The device does indeed pop up in the device manager but only for the brief 2 second window before it disconnects. I've tried multiple usb ports on my pc with the same result. The kindle does not power off in any way when the it disconnects from the pc.
Click to expand...
Click to collapse
What is the device name that comes up?
What command did you send to stop the countdown?
What did it output as a result of the command?
What makes you think that it should power off when you disconnect from the PC?
kinfauns said:
What is the device name that comes up?
What command did you send to stop the countdown?
What did it output as a result of the command?
What makes you think that it should power off when you disconnect from the PC?
Click to expand...
Click to collapse
I've tried to reset the bootmode via the KFU method recommended in the guide posted here (normal, 4000 and trying to reset when it says waiting for device) The device pops up in the device manager as an "unknown device" which may be a problem with the version of the drivers im DLing. I'm using KFU version 0.9.6
When I first DLed them it seemed as if the drivers were installing correctly, when I plugged in the Kindle is said drivers were being installed but it failed because the device disconnected after the 2 seconds.
Rapid disconnects are nothing unique, they're simply driver or USB problems. Any malfunctioning USB device will give you that same sequence. Anyways, it's difficult to get out of a boot-loop without ADB so let's try to get that USB working again.
First, do you have a bootloader (like FFF) or a recovery (like TWRP) loaded? I'm not sure the USB driver will work during boot without at least one of those installed.
Second, boot into TWRP, then try to fix the USB from the computer end. Uninstall the drivers, download a fresh batch, reinstall drivers, reboot. Use explorer to check %userprofile%\.android\adb_usb.ini and make sure 0x1949 is there. Also check Kindle Fire Utility\drivers\kindle\android_winusb.inf and make sure whatever hardware ID is showing up in device manager is in there.
BTW, what device IS showing in Device Manager after the disconnect? Use right click, scan for hardware changes.
Third, the USB cable or ports themselves may be at fault. Try a different cable, and try a different computer. Also, reboot often.
hunterhk said:
Rapid disconnects are nothing unique, they're simply driver or USB problems. Any malfunctioning USB device will give you that same sequence. Anyways, it's difficult to get out of a boot-loop without ADB so let's try to get that USB working again.
First, do you have a bootloader (like FFF) or a recovery (like TWRP) loaded? I'm not sure the USB driver will work during boot without at least one of those installed.
Second, boot into TWRP, then try to fix the USB from the computer end. Uninstall the drivers, download a fresh batch, reinstall drivers, reboot. Use explorer to check %userprofile%\.android\adb_usb.ini and make sure 0x1949 is there. Also check Kindle Fire Utility\drivers\kindle\android_winusb.inf and make sure whatever hardware ID is showing up in device manager is in there.
BTW, what device IS showing in Device Manager after the disconnect? Use right click, scan for hardware changes.
Third, the USB cable or ports themselves may be at fault. Try a different cable, and try a different computer. Also, reboot often.
Click to expand...
Click to collapse
Thanks for your response, I will go through these and report back when I get back home from class.
ok, now I have my kindle being recognized by my computer as "android phone" with the sub of "android adb interface." If I have read the guide correctly that means it is in fastboot mode. However when I open kfu it says the kindle is offline.
If someone would be willing to help me out through Skype I would gladly appreciate it. I'm really at a lose as to what to do at this point.
and no stupidly I do not have FFF or TWRP loaded, since I first rooted it when I was a super noob. The usb driver seems like it should be able to work according the the Kindle fire beginners guide, but KFU does not recognize the kindle even though my computer does.
hey guys,
im fairly new to this kind of topics, but i coulndt find anyone with my problem on the forums
here is the deal:
ive installed the abd drives onto my htc wildfire s, so i wanted to get it working with htcdev so i could put cwm on it.
but if i go into my bootscreen, and after that put in my usbcable in it, the red letters that should say "usb fastboot" according to instructions. but if i put in my cable it says "usb fastboot" then "fastboot", its a random thing, cause every time there is a different combination of times and durations it flickers. then after a random time of flickering it just changes to "fastboot" and stays that way until i replug the cable and the sceme start again. ive tried other cable but it still does the same.
ps: if im not in my bootscreen my device manger sees "andriod adb device" but when im in bootscreen my device manger calls it a "undetecteble usb device"
pc is running on 64x bit windows 8.1
pleas help if you know what to do with it,
greetz maarten
Fastboot is known not to work properly on Windows 8.1. But a solution has been posted, just follow the steps in the thread linked below.
http://forum.xda-developers.com/htc-wildfire-s/general/driver-finally-how-to-fastboot-to-t2857536
Click to expand...
Click to collapse
Hi there,
strugggling to get the xa2 into fastboot mode so I can flash a new boot.img and root. I've enabled OEM unlocking and installed the USB drivers. the command 'adb reboot fastboot' doesn't work, just reboots the phone. adb over usb works fine. The official method to get into fastboot 'plug in USB whilst holding vol up/down' also doesnt allow me to get itno fastboot mode, phone just stays blank with a notification LED. I use 'fastboot devices' to see it if it connected. I've tried this on 2 PCs now to no avail
I'm thinking maybe the fastboot drivers are wrong?
Does anyone have any other suggestions or help?
Thanks
jaw2floor said:
Hi there,
strugggling to get the xa2 into fastboot mode so I can flash a new boot.img and root. I've enabled OEM unlocking and installed the USB drivers. the command 'adb reboot fastboot' doesn't work, just reboots the phone. adb over usb works fine. The official method to get into fastboot 'plug in USB whilst holding vol up/down' also doesnt allow me to get itno fastboot mode, phone just stays blank with a notification LED. I use 'fastboot devices' to see it if it connected. I've tried this on 2 PCs now to no avail
I'm thinking maybe the fastboot drivers are wrong?
Does anyone have any other suggestions or help?
Thanks
Click to expand...
Click to collapse
Hi
Install "5 seconds adb drivers"
Connect the turned off phone to PC via USB just pressing volume down button (no power) and keep pressing it until you see the LED turning green or blue.
Here u have! :highfive:
faby GT said:
Hi
Install "5 seconds adb drivers"
Connect the turned off phone to PC via USB just pressing volume down button (no power) and keep pressing it until you see the LED turning green or blue.
Here u have! :highfive:
Click to expand...
Click to collapse
Hi thanks for getting back to me,
I assume you meant the '15 second installer', which I just did just install successfully. I am still unable to see the device with 'fastboot devices' command.
Other info: I have factory reset the phone, made sure oem unlock is checked, tried the same process on another computer. I can get adb mode to work fine, but the command 'adb reboot fastboot' just reboots the phone as usual
jaw2floor said:
The official method to get into fastboot 'plug in USB whilst holding vol up/down' also doesnt allow me to get itno fastboot mode, phone just stays blank with a notification LED.
Click to expand...
Click to collapse
That is the correct behaviour.
Blue LED = Fastboot mode
Green LED = Flash mode (for reflashing stock firmware with XperiFirm in case EVERYTHING is broken)
Install these drivers:
https://adb.clockworkmod.com/
When in Fastboot mode, go to device manager, there is an Android device in there (may also be called MTP device).
In the device manager, install a new driver for that and use the ADB driver from C:\Program Files (x86)\ClockworkMod\Universal ADB Driver
Windows will tell you that it's the wrong driver. Install it anyway and Fastboot will recognize your XA2 now.
schmatzler said:
That is the correct behaviour.
Blue LED = Fastboot mode
Green LED = Flash mode (for reflashing stock firmware with XperiFirm in case EVERYTHING is broken)
Install these drivers:
https://adb.clockworkmod.com/
When in Fastboot mode, go to device manager, there is an Android device in there (may also be called MTP device).
In the device manager, install a new driver for that and use the ADB driver from C:\Program Files (x86)\ClockworkMod\Universal ADB Driver
Windows will tell you that it's the wrong driver. Install it anyway and Fastboot will recognize your XA2 now.
Click to expand...
Click to collapse
If it won't work, after that just go to devices and printers and delete Xperia XA2. It will work.
Else, after installing 15 seconds, inside device manager, update the driver of your phone (or mtp device), select local, then Android device, then fastboot. Disconnect the phone and reconnect as before (volume down)
Fastboot is VOL. UP (on this device)! (Not vol. down)
So basically turn off the device, hold Vol. UP and simply connect to USB, hold Vol. UP until LED is steady blue and you are set.
Note: VOLUME UP activates fastboot and VOLUME DOWN enables flashmode and/or recovery mode
Similar trouble here.
1. VOL UP + plug in USB: Blue led blinks once, then phone shows it's charging (turned off)
2. adb reboot bootloader: Phone just turns off
Corias said:
Similar trouble here.
1. VOL UP + plug in USB: Blue led blinks once, then phone shows it's charging (turned off)
2. adb reboot bootloader: Phone just turns off
Click to expand...
Click to collapse
I had the same issue with my XA2.
The solution (at least for me) was: different USB cable and different USB-port. As it turns out, my cable was somehow worn out (though data transfer and charging was working quite well). Going into fastboot, the blue led lit very short time and then the phone restarted. Furthermore on my PC it somehow only worked on the one USB port and not the other (both USB 3.0).
--> Maybe trying the most obvious might help also some of you
BoernMe said:
I had the same issue with my XA2.
The solution (at least for me) was: different USB cable and different USB-port. As it turns out, my cable was somehow worn out (though data transfer and charging was working quite well). Going into fastboot, the blue led lit very short time and then the phone restarted. Furthermore on my PC it somehow only worked on the one USB port and not the other (both USB 3.0).
--> Maybe trying the most obvious might help also some of you
Click to expand...
Click to collapse
Did solve this by connecting to different PC. No cable/port/hub change did help. Looks like there was some trouble with drivers (though the same PC fastboots Z3 Tablet Compact perfectly).
Same
I'm also having the same issue with my Xperia XA2 Ultra. (boy that's a mouthful)
Phone model is H3223.
Host OS is Windows 10 Pro v. 2004.
Using latest Android SDK tools (i.e. ADB and Fastboot platform tools): platform-tools_r30.0.5-windows. Got it directly from Android site.
I think I had a previous driver for Android already installed or somehow Windows got it. ADB worked, Fastboot didn't. Read online about someone on this forum getting it to work by using XZ2 driver from Sony as they evidently don't have a published driver for this device. The person who posted this solution had reported problems with this driver recently. I tried it anyway.... ADB commands work and my phone shows up when listing devices. Reboot into fastboot mode and the only thing my phone does is show a blue light indicator... no splash screen or logo. To me this means it's starting fastboot but my driver isn't working with it to recognize it as any commands for fastboot return nothing or fail. It doesn't show up under fastboot devices command.
Does anyone have a clue as to what to do?
that_random_guy said:
Same
I'm also having the same issue with my Xperia XA2 Ultra. (boy that's a mouthful)
Phone model is H3223.
Host OS is Windows 10 Pro v. 2004.
Using latest Android SDK tools (i.e. ADB and Fastboot platform tools): platform-tools_r30.0.5-windows. Got it directly from Android site.
I think I had a previous driver for Android already installed or somehow Windows got it. ADB worked, Fastboot didn't. Read online about someone on this forum getting it to work by using XZ2 driver from Sony as they evidently don't have a published driver for this device. The person who posted this solution had reported problems with this driver recently. I tried it anyway.... ADB commands work and my phone shows up when listing devices. Reboot into fastboot mode and the only thing my phone does is show a blue light indicator... no splash screen or logo. To me this means it's starting fastboot but my driver isn't working with it to recognize it as any commands for fastboot return nothing or fail. It doesn't show up under fastboot devices command.
Does anyone have a clue as to what to do?
Click to expand...
Click to collapse
I have the exact same problem, have not managed to find a solution trying with 3(!) different laptops and 2 different cables. No idea what could go wrong. I checked the device and it says that unlocking is okay. Really frustrating.
Edit: I actually found a way! Once you manage to enter the fastboot mode (light is permanently blue) go to the device manager in windows, click on the unknown android device, and install custom drivers (either by selecting from the list or by picking the universal adb driers from a local folder). These custom drivers should be adb drivers. Once they are installed, fastboot should work.
I had the same problems with my device XA2 H3113 and Win10.
My solution: Try it with Ubuntu. Just grab an 8GB usbstick, install Ubuntu via usb-installer, boot ubuntu and open a terminal
sudo apt update
sudo apt install adb fastboot
LolRoll said:
I have the exact same problem, have not managed to find a solution trying with 3(!) different laptops and 2 different cables. No idea what could go wrong. I checked the device and it says that unlocking is okay. Really frustrating.
Edit: I actually found a way! Once you manage to enter the fastboot mode (light is permanently blue) go to the device manager in windows, click on the unknown android device, and install custom drivers (either by selecting from the list or by picking the universal adb driers from a local folder). These custom drivers should be adb drivers. Once they are installed, fastboot should work.
Click to expand...
Click to collapse
Hey can you please provide me a link to the drivers? as I've been trying so many drivers and they don't work.
LolRoll said:
I have the exact same problem, have not managed to find a solution trying with 3(!) different laptops and 2 different cables. No idea what could go wrong. I checked the device and it says that unlocking is okay. Really frustrating.
Edit: I actually found a way! Once you manage to enter the fastboot mode (light is permanently blue) go to the device manager in windows, click on the unknown android device, and install custom drivers (either by selecting from the list or by picking the universal adb driers from a local folder). These custom drivers should be adb drivers. Once they are installed, fastboot should work.
Click to expand...
Click to collapse
works for me