[Q] evo 4g will not boot out of recovery - EVO 4G Q&A, Help & Troubleshooting

I tried to update my phone to Gingerbread rom using this guide
http://forum.xda-developers.com/showthread.php?t=1109272
My problem is that I can not boot out of recovery or boot at all. I still have S-off and can still get into the boot loader. I was using a Unrevoked 3 with stock Froyo before I tried to update. I did a NanDroid backup and it still won't restore the rom I had before.It gives me an error " Error while flashing boot image" . I am using Clockword Mod v2.5.0.1. I tried updating the PC36IMG.zip file in hboot, but still won't boot. I am fully able to get into recover and hboot. Will someone please help!

did you name it pc26img? it should be PC36IMG.

Yeah , it is PC36IMG.zip

bz1906 said:
I tried to update my phone to Gingerbread rom using this guide
http://forum.xda-developers.com/showthread.php?t=1109272
My problem is that I can not boot out of recovery or boot at all. I still have S-off and can still get into the boot loader. I was using a Unrevoked 3 with stock Froyo before I tried to update. I did a NanDroid backup and it still won't restore the rom I had before.It gives me an error " Error while flashing boot image" . I am using Clockword Mod v2.5.0.1. I tried updating the PC36IMG.zip file in hboot, but still won't boot. I am fully able to get into recover and hboot. Will someone please help!
Click to expand...
Click to collapse
Well that was probably the most confusing method you could've tried to update.
The reason you're most likely getting the boot.img error, is because the nandroid backup that you're trying to restore, was created when you were on a different bootloader. If you followed the method that you linked to, I'm pretty sure that the new bootloader would've been installed with that. Since it's a different bootloader, your nandroid backups (from when you were on an older bootloader) will not work. You'll have to get the phone booting, and then start making a 'new set' of nandroid backups. Your old ones will most likely be no good now.
I would suggest that you download a new rom, and try to flash it after performing a full and thorough wipe. I would suggest using Amon Ra to perform a full wipe and do your flashing. I'll attatch a PC36IMG of Amon Ra version 2.3. Put that file on your sd card, then boot to the bootloader, and select yes to let it flash. Then boot to recovery, wipe everything in there, except for your SD card. Then flash a rom from scratch and you should be good

Great will try this right now. I was using rom manager to do all backups and restores also. If that helps any.

bz1906 said:
Great will try this right now. I was using rom manager to do all backups and restores also. If that helps any.
Click to expand...
Click to collapse
I would suggest using Amon Ra from now on, and flash everything manually from within recovery, instead of using ROM Manager. And by the way, the recovery you're going to install will NOT work with ROM manager. You can still download roms using rom manager if you'd like, but don't try to use it to actually flash anything for as long as you're on Amon Ra recovery.
So if you're not familiar with recovery, you should be able to figure it out relatively quickly. Just boot to recovery, selct 'wipe'. Select wipe all user data. Also wipe system and boot, and sd ext if your card is partitioned. Then go back to the main menu in recovery, and select 'flash zip from sd card'. Then find the rom that you loaded onto the sd card, select it and flash it. If its an AOSP rom, don't forget to flash teh gapps. Good luck.
EDIT: I would use one of these ROMS if you're looking for the stock OTA updated.
http://forum.xda-developers.com/showthread.php?t=1110733
http://forum.xda-developers.com/showthread.php?t=1038701

That did the trick . Thanks for all the patience and help.

bz1906 said:
That did the trick . Thanks for all the patience and help.
Click to expand...
Click to collapse
You're very welcome. I'm glad you got it squared away. Good work.

Related

[Q] Rooted and can not Flash A Recovery

I am rooted through Unrevoked 3.21 as of today, I insalled ROM Manager from the Market and I am trying to Flash A ClockworkMod Recovery so I can do a nandroid backup. However when I click t o flash recovery and select my phone a message pops us saying an "error occurred while flashing your recovery" any suggestions or help please. Looking to install some custom roms and kernels but I want to make sure I can recover.
Thanks in advance
Anyone have an idea?
Uninstall, reinstall, reboot
This is the absolute easiest way... works when just about everything else fails...
let me know if it worked for you:
http://forum.xda-developers.com/showthread.php?t=764062&highlight=forever
And actually, this will give you AMON recovery... but that is way better anyway. You can NAND backup from there... and you will actually have wipes that are complete.
Follow the directions for applying the OTA update, but skip the OTA flash.
http://forum.xda-developers.com/showthread.php?t=790394
BTW you can hold up either leg with one foot one the ground...but you cannot hold up both... You can't flash a recovery from a recovery... (it would over-write itself and execution would resume at some random coincidental opcode).
someone in the development section said this was possible... he explained that he flashed clockwork while already in amon recovery. said he was able to make a nandroid backup thorugh the clockwork recovery then when he rebooted he was still on amon's recovery. i thought it was pretty cool.
i am sorry but i cannot remember who it was that said it.

[Q] Installing ROMS on Unrevoked.

I'm still pretty new to Android, coming from BlackBerry. Anyway, I just rooted my EVO using Unrevoked3 and I want to flash to the Mikfroyo ROM, but I'm completely lost on what do next. Do I install Unrevoked Forever on top of unrevoked3 and if so, how do I go about doing that. All I've seen searching threads is that I should probably use ROM Installer, but I guess I'm suppose to have S-ON?.. What's my next step after Rooting with Unrevoked3?
No. You are rooted already. All you have to do now is simply download the Rom you want to flash and place it on your SD card. Afterwards, turn off your phone. Simultaneously press the down volume button and the power button until your phone starts. You will enter the bootloader screen. You should see S-OFF. That means your security is off a/k/a you're rooted. Anyway, if you have a PC36IMG.zip file on the root of your SD card, the bootloader will automatically detect it and prompt you to install. Disregard. Anyway, select recovery and then you will be taken to the recovery screen. I'm assuming you have Clockworkmod as your recovery. Anyway, I don't remember the menu structure of it because I use amon RA as my recovery. Anyway, go to the backup/restore menu and create a nandroid backup of your current setup. In case you don't like the Rom you're about to flash, you can always return your device to the way it was prior to flashing by simply restoring the nandroid backup. After you've made your nandroid backup, go to the wipe menu and wipe EVERYTHING except the SD card itself. Afterwards, flash the Rom you chose and then reboot. Be patient during the first boot after flashing. Enjoy your new Rom..
posting & replying via the XDA Premium app
I don't have PC36IMG.zip on my card. Is that gonna be a problem? Is there somewhere I can download it?.. I backed up phone numbers and I used exuninstall (I've used before after wiping my phone) to backup my apps (is that pretty much the same as creating a nandroid?)
x313x said:
I don't have PC36IMG.zip on my card. Is that gonna be a problem? Is there somewhere I can download it?.. I backed up phone numbers and I used exuninstall (I've used before after wiping my phone) to backup my apps (is that pretty much the same as creating a nandroid?)
Click to expand...
Click to collapse
nope actually saves you some annoyance not having that pc36img.zip on there. a nandroid isn't the same as backing up stuff seperately. nandroid copies exactly what is on your phone's flash memory atm onto the sdcard, in .img formats. these are just in case you don't like the rom you flash. MAKE SURE TO HAVE AT LEAST ONE BACKUP OF THE WIMAX PARTITION WIMAX.IMG IS THE ONLY NON-RECOVERABLE PART OF THE PHONE. for backing up, i'd use titanium backup. just hit menu, batch, and select backup all user apps +data. DON'T BACKUP SYSTEM DATA. just backup contacts by going to the people app, hitting menu, and import/export. choose export, and backup whatever you want.
since you used unrevoked, i assume you are using clockworkmod recovery. this is annoying to both you and developers who enjoy writing in amend scripting (cwm 3.0+ only reads edify, ick). http://forum.xda-developers.com/showthread.php?t=705026 downlaod the pc36img.zip (here's where they come in handy) and put it on the root of your sdcard. then boot into bootloader, and accept the update. say no to the reboot. and choose recovery from the menu. next chance you get, remove or rename the pc36img.zip so it doesn't prompt you to update every time you boot into bootloader. now go to backup/restore, and make a nandroid backup. MAKE SURE YOU ALWAYS HAVE AT LEAST 1 OF WIMAX BACKED UP IN SEVERAL PLACES LIKE PHONE, COMP, ONLINE BACKUP, ETC. IT'S IMPORTANT. then, back out to the main screen, and go to wipe. wipe data, cache, and dalvik cache. do this every time you flash a new rom btw. if you flash something ontop of a rom (theme, kernel, anything else, addon, etc) then just wipe cache and dalvik cache.
so now choose flash zip from sdcard, find the zip on your card, and flash it! it'll install. then choose reboot from the menu, and you're all good.
just ask if you have any other questions.
dk
Just wanna make sure about this..
Should I have both PC36IMG.zip and the mikfroyo on my SD at the same time or should I flash the PC36IMG.zip file and then put the ROM on my SD? And just to make sure I got it, the PC36IMG.zip will replace my recovery with a custom recovery, right?
And I don't need to flash Unrevoked forever?.. The only thing I've done so far is back up apps & numbers, wiped everything from the bootloader with the Clear Storage option, then rooted with Unrevoked3. (I rooted probably 5 mins before my original post)
x313x said:
Just wanna make sure about this..
Should I have both PC36IMG.zip and the mikfroyo on my SD at the same time or should I flash the PC36IMG.zip file and then put the ROM on my SD? And just to make sure I got it, the PC36IMG.zip will replace my recovery with a custom recovery, right?
And I don't need to flash Unrevoked forever?.. The only thing I've done so far is back up apps & numbers, wiped everything from the bootloader with the Clear Storage option, then rooted with Unrevoked3. (I rooted probably 5 mins before my original post)
Click to expand...
Click to collapse
It doesn't matter. If you want to put them both on your card you can or if you want to install the PC36IMG and then go into recovery and choose usb/ms toggle(or something like that and delete the PC36IMG and then add Mikfroyo you can do it that way. After that just wipe data, cache and davlik cache and then choose flash zip from sdcard then choose zip then scroll to Mikfroyo and install. Use the volume buttons to scroll and the power button to select. If you leave PC36IMG on the sdcard it is not a big deal other than an inconvenience because every time you boot into bootloader it will scan and ask if you want to update.
PC36img.zip is a file name that your bootloader recognizes as an update to install, so the only reason people say to get rid of it or not is if you have a file named that in root of SD, everytime you go into bootloader, it'll ask to install it.
(I didn't quite get that when I first rooted, so I'm just throwing it out there in case you don't either)
Sent from my PC36100 using XDA App
Read this:
http://noobgui.de/wiki/index.php?title=Main_Page
jstalford said:
Read this:
http://noobgui.de/wiki/index.php?title=Main_Page
Click to expand...
Click to collapse
thanx i nearly forgot how to unroot again.. thx. now i can warranty my fone for heating up =)
scottspa74 said:
PC36img.zip is a file name that your bootloader recognizes as an update to install, so the only reason people say to get rid of it or not is if you have a file named that in root of SD, everytime you go into bootloader, it'll ask to install it.
(I didn't quite get that when I first rooted, so I'm just throwing it out there in case you don't either)
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
I'm confused (sry if I'm just not getting it) do I need to flash PC36IMG.zip if I don't need to update? I'm running the latest version of everything. Wouldn't I be able to just make the backup with nandroid, then install the rom? Or is flashing PC36IMG.zip a must no matter what?
x313x said:
I'm confused (sry if I'm just not getting it) do I need to flash PC36IMG.zip if I don't need to update? I'm running the latest version of everything. Wouldn't I be able to just make the backup with nandroid, then install the rom? Or is flashing PC36IMG.zip a must no matter what?
Click to expand...
Click to collapse
First, make sure your battery is AT LEAST at 50% before doing this. You don't want to run out of juice while it is writing or your phone will get bricked.
Secondly, I recommend you use Amon RA recovery. The easiest way to get it is to download ROM manager from the market, and scroll to the bottom of the app options to where it says "flash alternate recovery". This will install Amon recovery over the clockwork recovery that unrevoked installed on your phone. In recovery mode, you use the volume up/down buttons to navigate the menu and the power button to select your choice.
1) Download the rom, and place the zipped file in the root of your SD card.
2) Power off your phone, and power it back while holding volume down to boot into recovery mode.
3) If you haven't already, from here, create a NAND back-up of your phone in case something goes wrong. Make sure you check the box that says Wimax and you back up your Wimax keys, too. (This takes 5-10 minutes; let it finish)
4) From the recovery menu, wipe cache twice, dalvik cache twice, and data. (check advanced for the option to wipe dalvik)
5) From the main recovery menu, choose the "flash zip from SD card" and then look for the rom file you put on your SD card. Highlight it and use the power button to select it and flash it onto your phone. (This will take a while, too.....let it finish)
6) Reboot your phone and enjoy your new rom!
You can follow this process to flash just about any zip file, including custom kernels, miscellaneous fixes, certain themes, custom boot animations, etc. It is recommended that you flash one item at a time. Do not flash a bunch of things without rebooting the phone; do one at a time.
REMEMBER TO DO A NAND BACK-UP FIRST! If anything happens, this will make your life MUCH easier to get your phone back to how it is now without going on a much bigger mission.
I kinda figured that about the battery, cause when I used to flash CFW on my PSP I had to have the battery at least 75%... But what has me confused is the PC36IMG.zip. It wasn't on my SD after rooting, and I'm not trying to update anything, so do I still need to download and flash it or can I just go right to backing up nandroid and instill the rom?
x313x said:
I kinda figured that about the battery, cause when I used to flash CFW on my PSP I had to have the battery at least 75%... But what has me confused is the PC36IMG.zip. It wasn't on my SD after rooting, and I'm not trying to update anything, so do I still need to download and flash it or can I just go right to backing up nandroid and instill the rom?
Click to expand...
Click to collapse
The PC36IMG.zip file is named that way so your bootloader can recognize it. However, you are booting into a custom recovery, not the bootloader, so it doesn't matter if you have that file on your SD card or not. From the way you are talking, it doesn't sound like you even know what is inside that PC36IMG.zip, so I would just delete it. Or is it the rom file itself that is named that way? If so, you can still flash it via recovery even if it's named PC36IMG.zip......that's not a problem.
Just make a NAND back up, wipe and flash the rom. If something goes wrong, you can always power the phone on holding volume down to boot into the recovery to restore your NAND and start over.
x313x said:
I kinda figured that about the battery, cause when I used to flash CFW on my PSP I had to have the battery at least 75%... But what has me confused is the PC36IMG.zip. It wasn't on my SD after rooting, and I'm not trying to update anything, so do I still need to download and flash it or can I just go right to backing up nandroid and instill the rom?
Click to expand...
Click to collapse
Okay, I'm going to try to give it a shot.
For right now, forget the PC36IMG.zip. It was needed to switch recoveries, but it seems like it might be confusing you. Anything that flashes through the bootloader has to be named that, not just recoveries. It is suggested to use Amon Ra because some ROMs won't flash with Clockwork, which is what unrevoked puts on your phone. Amon Ra, in my opinion (and obviously other's) is a better alternative. To get Amon Ra - to avoid any problems with flashing - download Rom Manager if you haven't already. Choose "flash alternate recovery". When it's done, power off your phone then boot into the bootloader. Choose recovery, then do your backup. In Amon Ra, just keep the boxes checked, and then choose backup. After that's finished, go back to nandroid backup & uncheck the boxes that are already checked (with the power button), then check Wimax only and backup again. Once you're finished backing up, wipe & flash.
You don't have to use Amon Ra, it's just highly suggested. It's better to go ahead and do it now, since Ra won't restore backups made with Clockwork and vice versa - it'll save you from having to go back/forth later. Plus, I'm not sure how/if Clockwork backs up your wimax.
Good luck!
PlainJane is right. Forget about the PC36IMG.zip. In my post, I stated, "if" you have a PC36IMG.zip on the root of your hard drive, the bootloader will automatically recognize it and to simply disregard. If you had one, fine and if you didn't have one, fine. Disregard, either way. Remember, I don't know what you may have attempted to flash or the contents of your SD card. I was simply trying to be as thorough as I could. Everyone who has replied to your post has basically told you the exact same thing. Now, disregard any mention of the PC36IMG.zip file and follow the remaining steps and you will be fine.
posting & replying via the XDA Premium app
plainjane said:
Okay, I'm going to try to give it a shot.
For right now, forget the PC36IMG.zip. It was needed to switch recoveries, but it seems like it might be confusing you. Anything that flashes through the bootloader has to be named that, not just recoveries. It is suggested to use Amon Ra because some ROMs won't flash with Clockwork, which is what unrevoked puts on your phone. Amon Ra, in my opinion (and obviously other's) is a better alternative. To get Amon Ra - to avoid any problems with flashing - download Rom Manager if you haven't already. Choose "flash alternate recovery". When it's done, power off your phone then boot into the bootloader. Choose recovery, then do your backup. In Amon Ra, just keep the boxes checked, and then choose backup. After that's finished, go back to nandroid backup & uncheck the boxes that are already checked (with the power button), then check Wimax only and backup again. Once you're finished backing up, wipe & flash.
You don't have to use Amon Ra, it's just highly suggested. It's better to go ahead and do it now, since Ra won't restore backups made with Clockwork and vice versa - it'll save you from having to go back/forth later. Plus, I'm not sure how/if Clockwork backs up your wimax.
Good luck!
Click to expand...
Click to collapse
I also just recently rooted for the first time with Unrevoked, did the back up with Clockwork and can confirm that the folder with the backup has a file called wimax.somecode.img if that's what you're thinking of.
x313x, that page jstalford posted has some great info, and downloading Rom Manager, Titanium Backup and Busybox (was needed for one of those programs, don't remember which) made things much easier.
dougjamal said:
PlainJane is right. Forget about the PC36IMG.zip. In my post, I stated, "if" you have a PC36IMG.zip on the root of your hard drive, the bootloader will automatically recognize it and to simply disregard. If you had one, fine and if you didn't have one, fine. Disregard, either way. Remember, I don't know what you may have attempted to flash or the contents of your SD card. I was simply trying to be as thorough as I could. Everyone who has replied to your post has basically told you the exact same thing. Now, disregard any mention of the PC36IMG.zip file and follow the remaining steps and you will be fine.
posting & replying via the XDA Premium app
Click to expand...
Click to collapse
Alright, cause right after you someone told me I should download it and gave me a link. That's why I was so confused..
Wait, I just went back to that link and I think the PC36IMG.zip he linked me to is Amon RA (http://forum.xda-developers.com/showthread.php?t=705026)
I tried to use ROM Manage to switch from clockwork, but it wont let me push Flash Alternative Recovery. It says: No Alternative Recovery Available
x313x said:
Alright, cause right after you someone told me I should download it and gave me a link. That's why I was so confused..
Wait, I just went back to that link and I think the PC36IMG.zip he linked me to is Amon RA (http://forum.xda-developers.com/showthread.php?t=705026)
I tried to use ROM Manage to switch from clockwork, but it wont let me push Flash Alternative Recovery. It says: No Alternative Recovery Available
Click to expand...
Click to collapse
I understand. Anyway, if you want to flash amon RA, simply download the zip file and place it on the root of your SD card and then power off. Simultaneously press the down volume button and the power button until your EVO starts. The bootloader will automatically detect the zip file and prompt you to install it. Follow the easy prompts to install. Installation of amon RA takes less than 10 seconds. Afterwards, reboot into recovery or to your homescreen.
posting & replying via the XDA Premium app
ok, i think i'll step out of this thread after this (the dude's got you) but just going to try and clarify what a pc36img.zip is.
a pc36img.zip is what bootlaoder recognizes as an update. it can contain anything. a system, a kernel, a recovery, anything. maybe even everything. so keep them organized. they are all different. like the one i was telling you to flash installed amon-ra recovery. it's helpful to then delete or rename the file, so bootloader doesn't ask you to update next time you boot to bootloader.
is that any better? hah it's sorta hard to explain.
I got it up and running a little bit ago and it's running great with no problems. And it really was as easy as you all said. You guys are awesome, thanks for putting up with me

HELP! Boot loop on stock ROM

Hi guys!
I am sorry if this has already been answered somewhere, but I searched pretty thoroughly and I couldn't find a solution
I am trying to S-OFF an HTC Desire for a friend of mine and install CyanogenMod using this guide http://forum.xda-developers.com/showthread.php?t=1016084.
We rooted the phone without any issues, but before going through Alpharev I decided to make a nandroid backup through the phone's original recovery image (just as advised on Alpharev's site: "We try to leave the current ROM and datastructures completely intact. It is, however, advised to ALWAYS nandroid backup your phone before you run this procedure.
You will then always have a correct/current backup to fall back on in case something breaks."). So I just went into the Backup and Recovery menu and I chose backup.
Unfortunately after backing up, the phone went into a boot loop. We tried taking-out the battery and even doing a hard reset but nothing helped. Eventually we flashed the original RUU from O2 (it's an O2 Germany phone) and this fixed the issue.
I am a bit concerned since I wasn't able to find anyone who had the same problem and it is a bit weird that the phone should go into a boot loop without even installing another ROM or anything - just trying to do a backup of the stock ROM. I am thus a bit hesitant to go on with the S-OFF...
Any help would be deeply appreciated!
Well, first of all, you don't need to be S-Off to install CyanogenMod7. Only root. Usually, people do S-Off so they can change the Boot Splash image.
Make a Gold Card for your SD. Some Desire's need it, some don't. Better safe than sorry.
Secondly, after root, I would goto the market and install ROM Manager. Then flash to the latest Clockwork Recovery.
Then,I would make sure I have a recent Recovery image (NandBackup)
Download Gapps.zip to the root of the SD.
Download the CyanogenMod7 to the root of the SD, boot phone to recovery, Wipe cache memory, also goto Advanced and wipe the Delvik memory.
Then Install from SD, do the CM7, then after it finishes, Select Install from SD again, and install the Gapps.zip
Why your backup failed, who knows. I suppose you were using Unrevoked?
Thanks! Do you know why the boot loop could happen?
Moscow Desire said:
Well, first of all, you don't need to be S-Off to install CyanogenMod7. Only root. Usually, people do S-Off so they can change the Boot Splash image.
Make a Gold Card for your SD. Some Desire's need it, some don't. Better safe than sorry.
Secondly, after root, I would goto the market and install ROM Manager. Then flash to the latest Clockwork Recovery.
Then,I would make sure I have a recent Recovery image (NandBackup)
Download Gapps.zip to the root of the SD.
Download the CyanogenMod7 to the root of the SD, boot phone to recovery, Wipe cache memory, also goto Advanced and wipe the Delvik memory.
Then Install from SD, do the CM7, then after it finishes, Select Install from SD again, and install the Gapps.zip
Why your backup failed, who knows. I suppose you were using Unrevoked?
Click to expand...
Click to collapse
I suppose, there was some code that didn't get deleted due to the rooting process, if you used unrevoked. Although it rarely happens, sometimes it does.
Or maybe it didn't like some Application. Who knows. All it takes, is 1 peice of bad code.
With AlphaRev, although many use it, I believe it changes your bootloader code.
And, you can sometimes have problems as well.
But follow the steps I mentioned, and you should be ok.
Just make sure you create and use the Gold Card first.
The boot loop is a common issue with the first nandroid. All you had to do was restore the nandroid you just made.
Sent from my HTC Desire using XDA Premium App
TheGhost1233 said:
The boot loop is a common issue with the first nandroid. All you had to do was restore the nandroid you just made.
Sent from my HTC Desire using XDA Premium App
Click to expand...
Click to collapse
Right - I thought about that, but then I was hesitant, because I figured if it went into a boot loop then it probably did not create the backup image properly... So can I still restore the backup image now? It is saved on the sdcard so it should be intact after the RUU, right?
It "should be", but, one can only assume so.
Typically, I make a couple of backups each week. One never knows. Yeah, it will tell you successsful. but, better safe than sorry.

Can't install ROMs anymore?

I've installed Roms before but it is no longer working and I have no idea why. I do the usual, wipe data/cache/dalvik and then when I choose to install zip from sd card I get "finding update package....opening update package....installing update package" no matter what ROM i try. I've tried 3 and none of them are working anymore. Anybody know what's going on? Right now I'm stuck with stock.
I should also mention I'm on clockwork 2.5, I tried everything to switch to RA but to no avail.
I'm not sure what the question is.
The "finding update package, opening update package, etc" is normal. What happens when you reboot into the ROM? If you're still using CWM, are you making sure to use "Install zip from sdcard" instead of "Install update from sdcard"? The latter looks for an update.zip in the root of your sdcard.
If you want to switch to Amon Ra, the easiest way is to use ROM Manager and "Flash Alternate Recovery".
kingme23 said:
I've installed Roms before but it is no longer working and I have no idea why. I do the usual, wipe data/cache/dalvik and then when I choose to install zip from sd card I get "finding update package....opening update package....installing update package" no matter what ROM i try. I've tried 3 and none of them are working anymore. Anybody know what's going on? Right now I'm stuck with stock.
I should also mention I'm on clockwork 2.5, I tried everything to switch to RA but to no avail.
Click to expand...
Click to collapse
You can flash Amon Ra manually through the bootloader, but if when these fail you're restoring a backup, those backups will not work with Amon Ra. You'll need to either make a backup with Amon Ra or flash back to ClockworkMod to restore.
Download the PC36IMG.zip of Amon Ra and put it on the root of your SD card. Boot into the bootloader, wait for it to scan, choose yes to update. Don't reboot when it asks you. When it takes you back to the bootloader, choose recovery and try again. As I said, you may want to make a backup.
You can download Amon Ra here:
http://db.tt/WP0beNa
Don't rename the file.
If you still can't flash anything, connect your phone to your computer using the USB/MS toggle in Amon Ra. Copy everything over, then repartition your card through recovery. Move everything back, including the rom you want to flash, and try again.
(from... Evo/MIUI/Tapatalk)
Have you tried installing the latest AMON RA using the PCIMG36.ZIP on bootloader method? Also are you sure that your phone is still properly rooted?
If you're flashing any current ROM, it uses a new type of syntax for performing updates. Try flashing the newest Clockwork from ROM Manager and giving that a go.
nivron said:
I'm not sure what the question is.
The "finding update package, opening update package, etc" is normal. What happens when you reboot into the ROM? If you're still using CWM, are you making sure to use "Install zip from sdcard" instead of "Install update from sdcard"? The latter looks for an update.zip in the root of your sdcard.
If you want to switch to Amon Ra, the easiest way is to use ROM Manager and "Flash Alternate Recovery".
Click to expand...
Click to collapse
That's all that happens. It then says update installed but I can't reboot into the ROM because the ROM never actually installed. All I get is "update installed" but the ROM never flashes, the whole process takes about 1 minute.
I've tried switching to amon ra that way but was unsuccessful. It said I successfully switched but when I boot into recovery it still goes to clockwork. I also tried the bootloader method the other two users suggested, even trying out several different zips thinking one may have been corrupted but once again nothing, it boots into clockwork and does not read the pc36img file. I'm thinking viper could be correct because all the ROMs I've tried flashing so far have been fairly recent (cm7, kings 5)
It could be your SD card. Try formatting/repartitioning your SD card. Backup your files first, as everything will be erased. I'm not sure if you can mount through ClockworkMod. If not, you'll need to use an adapter to put your card directly into your computer.
Here's a newer version of ClockworkMod in PC36IMG form. If you can get it to flash, and your problem is the newer roms (amend/edify issues), then you should be able to flash a new rom. Amon Ra will flash both newer and older roms, but if you prefer CWM then use that. If you don't want to format your card, you can always try flashing an amend scripted rom first through your current ClockworkMod version.
Here's the newer CWM: http://db.tt/9sksyTK
(from... Evo/MIUI/Tapatalk)

[Q] evo stuck on white screen

I was on the energy rom (12/25/2011) and went into recovery and tried to restore one of my backups and was getting the md5 mismatch error. Then i tried using amon recovery instead of clockwork and still didnt succeed. Then I went into terminal emulator and did a fix for md5 error and tried to flash again after wiping and now im stuck on white boot screen. No matter which backup i try to use. Please help!!!! Thx
your best bet is to probably use Amon Ra to wipe everything (Except SD Cardthen reflash your rom
how do i get back on amon if i can only get into clockwork? Last time i was amon i went through rom manager and flashed it that way.
Don't use ROM Manager. I have a detailed explanation and a link to the file you need in my guide. Click the link in my signature
Rickbo7 said:
how do i get back on amon if i can only get into clockwork? Last time i was amon i went through rom manager and flashed it that way.[/Q
its ok use clockworks just wipe 3 times with clockworks and then install a fresh copy of the rom instead of a backup then ull be past the white screen //.... its not the recoveries issue its the backup itself then flash amons recovery and never go back to cwm
Click to expand...
Click to collapse
OK, it's Clockwork, not clockworks, Amon, not Amons and clockwork does NOT wipe properly.
Just do as I posted and you'll be fine
HipKat said:
OK, it's Clockwork, not clockworks, Amon, not Amons and clockwork does NOT wipe properly.
Just do as I posted and you'll be fine
Click to expand...
Click to collapse
Ok, so I was able to flash amon from your link (thx) and now I can't flash my backups. Am I supposed to download another stock rom and start from fresh again or will I be able to still use my backups that I made on clockwork?
Dude your backups are done. You couldn't flash them before, either.
You should delete your backups, flash the stock/Rooted ROM, and make a Nandroid of that, then do the wipe process again, and flash the custom ROM you want.

Categories

Resources