Related
*********************************
Jerome! has released a beta rom - see below for details - please help to test
*********************************
I noticed that a P750 Kitchen was released at asusmobile.ru, problem is that it is Russian base.
Using the following steps I was able to compile a rom that worked, abliet one I could not understand
1) grab your preferred kitchen from http://asusmobile.ru/board/viewtopic.php?t=14829 ( I used Manila Version)
2) extract
3) Copy your OEM files to the OEM folder
4) Run Build_ROM.cmd from root
5) When BuildOS comes up select your packages, press play, close when done
6) When prompted to select "B" or "X" to backup or delete dump folder
7) When NB0 Kitchen starts enter password: mrtoto
8) Load ROM and select PegasusP.nb0
9) Fill in and Select ROM version ,ROM date , CPU speed or pagepool size you want and click [Pack Image].
10) Select [XPR Compression] or [LZX Compression] and click [Build NB0]
11) Wait until you see the words "ROM.NB0 complete" in the message box, Exit the nb0 Kitchen and wait until you see its done
12) Open PegasusP.nb0 in a hex editor and change the bytes at offset 00001c5c from 00 10 85 05 to 20 00 00 0a, save.
13) Extract the attached ASUS_P525_NB0_Kitchen ENG.rar, open ASUS_P525_NB0_Kitchen.exe, load your nb0 and choose fix crc.
Flash by copying to root of SD card, hold power up, voice record in, joystick down while pressing reset and the bootloader will initiate a flash.
Next step is to convert to english, I have seen a tut at http://forum.xda-developers.com/showthread.php?t=312704 on how to translate, just wondering if there is an easier way that someone here may know of as with my limited knowledge I am likely to have missed something.
I tried dumping a rom from the guys at pdamobiz.com to use as base but packagetool would not work (no RGU?)
So anyway that is where I am at, if anyone wants to help that would be great as I reckon there is a few people out there that could do with an English P750 kitchen - I intend on getting this working at some point although time is limited.
HAt's off to the tool creators and contributors here at xda-devs, pdamobiz.com (feel like releasing a kitchen Undetect?) and asusmobile.ru.
Oh yeah if you decide to do anything I said and break stuff then don't cry to me, I have had a few bad flash's but each has recovered, YMMV.
dmozk said:
I notoced that a P750 Kitchen was released at asusmobile.ru, problem is that it is Russian base.
Using the following steps I was able to compile a rom that worked, abliet one I could not understand
1) grab your preferred kitchen from http://asusmobile.ru/board/viewtopic.php?t=14829 ( I used Manila Version)
2) extract
3) Copy your OEM files to the OEM folder
4) Run Build_ROM.cmd from root
5) When BuildOS comes up select your packages, press play, close wheen done
6) When prompted to select "B" or "X" to backup or delete dump folder
7) When NB0 Kitchen starts enter password: mrtoto
8) Load ROM and select PegasusP.nb0
9) Fill in and Select ROM version ,ROM date , CPU speed or pagepool size you want and click [Pack Image].
10) Select [XPR Compression] or [LZX Compression] and click [Build NB0]
11) Wait until you see the words "ROM.NB0 complete" in the message box, Exit the nb0 Kitchen and wait until you see its done
12) Open PegasusP.nb0 in a hex editor and change the bytes at offset 00001c5c from 00 10 85 05 to 20 00 00 0a, save.
13) Extract the attached ASUS_P525_NB0_Kitchen ENG.rar, open ASUS_P525_NB0_Kitchen.exe, load your nb0 and choose fix crc.
Flash by copying to root of SD card, hold power up, voice record in, joystick down while pressing reset and the bootloader will initiate a flash.
Next step is to convert to english, I have seen a tut at http://forum.xda-developers.com/showthread.php?t=312704 on how to translate, just wondering if there is an easier way that someone here may know of as with my limited knowledge I am likely to have missed something.
I tried dumping a rom from the guys at pdamobiz.com to use as base but packagetool would not work (no RGU?)
So anyway that is where I am at, if anyone wants to help that would be great as I reckon there is a few people out there that could do with an English P750 kitchen - I intend on getting this working at some point although time is limited.
HAt's off to the tool creators and contributors here at xda-devs, pdamobiz.com (feel like releasing a kitchen Undetect?) and asusmobile.ru.
Oh yeah if you decide to do anything I said and break stuff then don't cry to me, I have had a few bad flash's but each has recovered, YMMV.
Click to expand...
Click to collapse
Just want to let you know I'm working on it, expect some beta ROM's here soon So watch this space!
Hi, i wonder... will this work on O2 Xda Zset , it is made by Asus.
Cheers.
Nice one, I have not had a chance to do anything further. Look forward to seeing your work.
great
Hi is great was looking for one
First screenshots of BETA 0.1
Hi there,
I'm proud to present you the following progress status update:
VGA Windows Mobile 6.1 WWE SYS 21109 / XIP 20933 booting
GSM/3G/WIFI working
99% Interface is in English
20 MB of free RAM after boot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
All credits to
Barin for the original kitchen (Asusmobile.ru )
Sorg for the VGA modification
Calkulin SYS from Diamond
MRtoto/VIVI for the P525 kitchen
More to come soon!
Looks great I have a P750, and i'm looking for a good rom -- can't wait to see what you come up with
Just wondering -- are you planning on implementing Asus`Multihome too?
(http://forum.xda-developers.com/showthread.php?t=481616)
Also since its VGA will you be porting the P522w software over? (Camera, UrTime, etc.??) Just wondering cause Sorg's original one has replacement problems but they weren't as clean as the original
pear-i said:
Looks great I have a P750, and i'm looking for a good rom -- can't wait to see what you come up with
Just wondering -- are you planning on implementing Asus`Multihome too?
(http://forum.xda-developers.com/showthread.php?t=481616)
Also since its VGA will you be porting the P522w software over? (Camera, UrTime, etc.??) Just wondering cause Sorg's original one has replacement problems but they weren't as clean as the original
Click to expand...
Click to collapse
My plan is to make a 'clean' rom soon. All the basics should be working. When this works I'll focus on porting some applications. Feedback and ideas of which it should contain besides the Camera, Urtime, Multihome, let me know.
Again good work, are you planning on releasing your kitchen when stable?
dmozk said:
Again good work, are you planning on releasing your kitchen when stable?
Click to expand...
Click to collapse
Yes, I will, when I finished translating the OEM files, they are still Russian now. Just to make clear, it's not my kitchen, I'm modifying the work of Barin, Vivi etc etc.
Time for a bèta release - testers wanted
To digg out all the bugs I've created a beta release. I will need your help in testing and reporting bugs. Please reply in this thread when you find something odd:
Please note this is a beta release. Not intended for every day use, however, I have been running this build for a week now and it's working well for myself. There might be things that I've broken though.
Also, since this is a bèta release, I will not be held responsible for any problems on your device. Flash at own risk.
How to upgrade:
- Place the PegasusP.nb0 file on a non-sdhc storage card (128 megs or more)
- Plug in power
- Press and hold the following keys when softresetting:
Voice record - Joystick down - Slider button up (e.g. power on button)
Wait until device restarts. Do not interrupt!
File contents:
Asus P750 Rom WWE 6.1 VGA Build 5.2.20933
Download here:
http://www.megaupload.com/?d=EJ0LA3WZ
Used sources (credits to)
Barin's asusmobile.ru kitchen
Mrtoto NB0 Kitchen
BengBeng asuspda.net XIP 20933
Sorg VGA Drivers
Vivi and all the others involved in the P525/p750 stuff
Calkulin's Diamond SYS 20931
Please report any issues you encounter! Except for:
Known issues:
- When clicking on softkey to open a menu e.g. contactsmenu, the size is bigger than normal.
- Core systems settings as Power, Device info, Brightness still in Russian.
- Some ASUS apps still in Russian like Asus switcher, CPU mode, Asus profiles, Wakeupsource
- Sometimes after first boot "unknown usb driver" message appears. Reflash the rom to resolve.
Nice one - testing now.
Jerome - any chance of uploading elsewhere, can't seem to grab anything from megaupload today for some reason..
dmozk said:
Jerome - any chance of uploading elsewhere, can't seem to grab anything from megaupload today for some reason..
Click to expand...
Click to collapse
Here's your RS link:
http://rapidshare.com/files/201120253/PegasusP.nb0
MicMeo said:
Here's your RS link:
http://rapidshare.com/files/201120253/PegasusP.nb0
Click to expand...
Click to collapse
Thankyou kind sir.
Got it flashed, on boot stuck in endless align screen page loop - soft/hard reset no good. Have reverted to previous rom, for what its worth my bootloader reads as below:
2007/12/05 20:06:37
IPL: iplPegP_4H3
dmozk said:
Got it flashed, on boot stuck in endless align screen page loop - soft/hard reset no good. Have reverted to previous rom, for what its worth my bootloader reads as below:
2007/12/05 20:06:37
IPL: iplPegP_4H3
Click to expand...
Click to collapse
Anyone else experienced the same? I've flashed mine more than 50 times and never had this kind of error. There is a lang unlock tool available. Perhaps it has got to do with that?
I've upgraded from an Extreme Ultralite Rom VGA WWE 3.1.0.7. Perhaps you can flash this one too and check if the same error occurs?
The bootloader of my device is exactly the same. This is a radio/bootloader/gps/free ROM update, just the OS.
thanks for the same
it seems great till now
well i just wanted to ask you is there anyway we can have a manila version in vga p750.
just asking .
cause it take a lot of memory installing it with cab.
if it can be done on the Rom itself it will be great.
prioin said:
thanks for the same
it seems great till now
well i just wanted to ask you is there anyway we can have a manila version in vga p750.
just asking .
cause it take a lot of memory installing it with cab.
if it can be done on the Rom itself it will be great.
Click to expand...
Click to collapse
Doing some testing on OEM packages for the Diamond in the P750 kitchen now...
Jerome! said:
Doing some testing on OEM packages for the Diamond in the P750 kitchen now...
Click to expand...
Click to collapse
hi ,
that will be just brilliant,
Keep up the good work
looking forward for the same
see if i am of any help.
Regards
Prio
ported emui3.0 from p6 unicom based on android 4.4.2 for mate 1
original post :http://cn.club.vmall.com/forum.php?mod=viewthread&tid=1745404&extra=page%3D1%26filter%3Dtypeid%26typeid%3D236%26typeid%3D236
rom download link :pan.baidu.com/s/1i3Gbuip
kernel download link:pan.baidu.com/s/1bnlf1FL
kernel is for obtaining root access as it mentioned in original post.
notice that this rom is for unicom mt1-u06 and its chines and English support .
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
google translate:
ROM Name: EMUI 3.0 transplant first edition
ROM size: 512M
Adapter Version: MATE-U06
Test models: MATE-U06 _2G version
About the Author: HRT team _ycjeson
Support Forum: Pollen Club ( http://cn.club.vmall.com )
Release date: 2014/11/23
Transplant Huawei P6 11.19 EM released UI 3.0 firmware using XDA's gold-concert Great God 4.4 kernel, to express my heartfelt thanks! [Update log] 1. To improve the quality jpg 100% 2. Dial-up time is reduced to reflect the increase scrolling 3. Touch 4. To improve the overall response optimization 5. Battery 6. fix some application problems 7. Stagefright allow faster video and music 8. Rendering GPU 's UI 9. streamlined system applications, improve fluency 10. 5.0 using transition effects, making the system more smooth appearance (it is recommended to set up - Developer Options - window animations, excessive animation, duration is set to 0.5 the better) 11. on the basis of stability, a lot of useless system files to streamline streamline cust 12. 13. streamline lib library files useless shield 14. Update host ad code, shielding a lot of advertising
15. Join Sony video engine
16. TS optimization enabled by default
JIT acceleration 17. Open
18. modified 240 DPI, enjoy great vision
19. I did not experience a bit fever phenomenon, playing games do not know
20. Due to the revised DPI desktop ugly, so join millet desktop
21. modify models for mate
22. kernel root comes [Application] 1. Pollen club 2.re Manager 3. shutdown restart [bug] known as non-modified DPI 320 system will be applied after the dislocation, temporarily can not be repaired, the proposed set the system / bulid in the last line of 241 to 320 restart. Occasionally sex splash screen, not the probability [Note]
1. This package is suitable for Huawei MT1-U06 Unicom version, do not brush into other models
2. Brush the recommendation of a double clear
3. Brush after the proposal on "Developer Options" in the "Disable HW overlay" will greatly enhance fluency, but this function will fail to restart, you need to re-open.
[Brush tutorial]
1. Do not extract the ROM package will be downloaded directly on the external SD card
2. After the success of the third-party recovery brush off, hold down the power + volume + on the volume does not let go until you get to the third-party recovery
3. Choose to recovery wipe-format data input yes click Go
4. Return to the main interface, select install
5.external_sd the external sd card in there and find your choice below Brush Pack slider will slide from left to right starts Brush
6. Brush select reboot system after the completion of
Disclaimer: brush into this ROM willing to bear all the unpredictable consequences, I will not take any issue except the ROM. Depending on whether the brush into the personal wishes. Reproduced / modified, please indicate the source. Thanks!
Please BUG feedback or comments in the form of micro-blog, please support, scoring points praise. Download please look: ycjeson, other addresses downloading problems I have nothing.
Hide the contents of this post
pan.baidu.com/s/1i3Gbuip
Please replace the kernel of this brush to brush the bag into the kernel to obtain root privileges
Hide the contents of this post
pan.baidu.com/s/1bnlf1FL
Click to expand...
Click to collapse
is it safe to flash this one?
[REC Firmware] mate Mobile EMUI3.0 Andrews Brush Pack version 4.42. Solve the problem screen flash DPI250
switched kangVIP greatly in P6 hair pack, write new mate on this grand movement boot.img thanks!
This version is based on the official EMUI 3.0 version of the B706 make modifications , and make appropriate streamlined.
New features using inline code mode, with the original Emui style blend.
Disclaimer: Please respect the outcome of labor prohibited on this ROM for secondary packaging! ! !
EM UI 3.0 official code changes a lot, a lot of resources can not decompile, modify, greatly increased the difficulty,
do this ROM spent more than N effort.
Favorite local friends like him to support ^ _ ^
---------------------------------------- ------------------
Features:
. Automatic call recording, and remove recording tone
added split-screen multitasking switch (not compatible with split-screen mode to run the program (for example:. Ch ROM e), you can close the split-screen mode)
to revise the notification bar invisible switch:
You can select the ranks left / center / right home.
Tap / long press has the following options: flashlight | Shortcut menu | Screenshots | Locker | suspension program | Advanced Settings | Voice Assistant |
end of the current program | return key | Home key | Menu key | add volume | volume reduction | No Action
An operator Custom
Time centered option
kernel supports init.d script (which has built-in root).
The status bar displays the real-time speed.
Multitasking split-screen mode.
a modified version of the screen assistant to make more practical, use more smoothly:
All the keys are long press action to choose from, there are the following options:
flashlight | Shortcut menu | Screenshots | Locker | suspension program | Advanced Settings | Voice Assistant |
end of the current program | volume plus | volume down | menu key | Minimize screen assistant | No action
to increase the screen helper function minimization (via long press to achieve), watching movies or playing games can be displayed as a small dot
screen memory assistant position, reopened after closing (also the case after the restart the phone) before the position is consistent with the close
Join ZTE screenshots (via long press to achieve), when shots directly matting, graffiti and other
navigation bar to join the lock screen button, you can adjust the height and completely hidden.
Home key, back key, task keys, menu key, press the function selection
has the following options:
flashlight | Shortcut menu | Screenshots | Locker | suspension program | Advanced Settings | Voice Assistant |
end of the current program | volume plus | volume down | Menu key | No action
lock screen button when you need to display the menu button will automatically hide, the key position does not move, keep beautiful.
...
----------------------------------------------- -------------------------------------------------- -----
new features and optimized as follows:
1, the navigation bar to join the lock screen button, Home, return, tasks, long press function key menu options
2, the navigation bar height of their choice (24/36/40 / and completely hidden by default), modified with immediate effect.
3, the battery icon set, with the following options:
default
does not display percentages.
show only a percentage.
Hide percentage and icons.
Circular battery icon.
4, the status bar displays real-time network traffic, has the following options:
Hide
Show only upload traffic.
Show only download traffic
also shows upload / download traffic.
5, modify the ZTE screen assistant (see the specific effects of photo):
All keys long press operation can be selected
6, adding close up tone switch, disable google services and other options
7 Restart menu option added reboot to Recovery / Fastboot mode.
8, the power to customize menus and add flashlights and screenshots option
9, the pull-down notification bar calendar display
drop-down notification bar:
Click time to enter the alarm settings, press enter date settings
. Click on a date into the calendar, press to enter the date setting
10 time position to join the notification bar invisible power button, you can customize whether to use.
11, joined the operator to customize the display settings.
12, the new volume key wake-up option (no need to modify any key)
13, joined APP window operation mode, you can also start multiple app windows, and you can move the zoom window size and position.
(Mainly transplanted from mokee, part reference code F major, big thank F)
After starting in windowed mode, the program will appear in the left three buttons:
Press and hold the button on the bottom of the window size can be scaled
and hold the center button to move window position
click on the top of the button to close the current window
to modify DPI method:
Open with RE manager to edit mode system directory build.prop, add the following command:
DPI Vision: ro.sf.lcd_density = 250
single-handed operation: ro.config. hw_singlehand = 1
icon size: find ro.config.app_big_icon_size = 128, 128 into the 112 for the convenience of pollen, I had to modify the interface of 250 DPI, brush machine is that you can then modify your own! 5 * 5 because the problem can not be modified to decompile!
What BUG can self-test, the package itself is to jiyou early adopters, non-stable version, now everything is normal, no obvious BUG.
Modified suspension with large kang assistant perfect run!
http://pan.baidu.com/s/1gdGLyAf third party REC, must brush into running a batch file after unpack, Chinese show!
http://pan.baidu.com/s/1sjoGE9v Brush Pack
PS: Brush ago must double clear, after the first full start, double clear once again return to REC, you are prompted to restore ROOT permissions, select No. After skipping all the way into the system, and then restart again! Experience smooth power of 3.0 bar!
This package is a mobile version, you can extract the boot.img Unicom Unicom version Brush Pack brush into the can!
Click to expand...
Click to collapse
darkado said:
is it safe to flash this one?
[REC Firmware] mate Mobile EMUI3.0 Andrews Brush Pack version 4.42. Solve the problem screen flash DPI250
Click to expand...
Click to collapse
dude i really don't know.i flashed hrt version just now and every thing are working fine yet.if i see any bug i let you know.
I wanted to flash this one because it looks like it has kangvip features which I love on b929 and the one you posted looks like plain p6 rom. I'm backuping my phone now and I'm gonna flash this and post results.
darkado said:
I wanted to flash this one because it looks like it has kangvip features which I love on b929 and the one you posted looks like plain p6 rom. I'm backuping my phone now and I'm gonna flash this and post results.
Click to expand...
Click to collapse
that rom is just for mobile version not unicome.all out of china phones are unicome.it may harm your device or at least not workes properly.
I'm gonna use the kernel from the rom you posted.
The other rom doesnt work. So I installed the one you posted. Any idea how to center the nav bar so it's not all the way left. One bug I noticed imidiately is that when you hide the nav bar it doesnt always respond to your swipe to make it show again.
gave up on this rom. no way to clear defaults so no nova as default home. i guess i'll wait a little to install kitkat.
darkado said:
The other rom doesnt work. So I installed the one you posted. Any idea how to center the nav bar so it's not all the way left. One bug I noticed imidiately is that when you hide the nav bar it doesnt always respond to your swipe to make it show again.
Click to expand...
Click to collapse
this rom natively is in 320 dpi.i changed the dpi in system/build.prob from 241 to 320 and many deformations like navbar corrected.also navbar keys become just like lollipops :laugh: .
the rom is stable yet.
you can remove unwanted apps from kinguser tool.its wonderful:good:
as you may figure out this rom didnt came with gapps.i used this one : http://forum.xda-developers.com/showthread.php?t=2547250
Yeah but 320 is like three icons on the whole 6.1 inches Installed gold concerts cm, loving it for now.
Hello, I tested this ROM.
This is a multilingual ROM.
NFC is not supported.
Missing SIM conection method for wireless network 802.1xEAP
I can not move applications to the SD card.
The GAPPS installed without problem.
Everything else works fine for now.
need installation step by step procedure
i tried installing this rom twice bt ended up in logo stuck at bootloader....plz help.....
shaun100689 said:
i tried installing this rom twice bt ended up in logo stuck at bootloader....plz help.....
Click to expand...
Click to collapse
First you must unlock bootloader and flash a new recovery (twrp2.7).
Use the mate tookit by acbka (http://forum.xda-developers.com/showthread.php?t=2776084)
Reboot on recvovery
Wipe all.
Instal the ROM in the first page of the post
Wipe dalvin chache
Reboot.
Be patient, for 2 minutes
Reboot on recvovery
install the gapps for 4.4
Wipe dalvin chache
Reboot
Good luck
I assumed that it is fast, but sometimes it freezes ... ;-(
installed & working fine
installed & working fine...needs many UI related modifications....
one doubt--> in device details its showing my device name as "P6-C00" while in all screenshots uploaded shows "MT1-U06"
also my screen layout is 4x4 while in screenshot its 5x6
how to adjust screen DPI..?
shaun100689 said:
installed & working fine...needs many UI related modifications....
one doubt--> in device details its showing my device name as "P6-C00" while in all screenshots uploaded shows "MT1-U06"
also my screen layout is 4x4 while in screenshot its 5x6
how to adjust screen DPI..?
Click to expand...
Click to collapse
flash it again.i have no problem with my device but performance and in 320 dpi screen layout is 4x4.
changed the DPI to 320......everything seems normal.....
no data connectivity
no data connctivity....plz help
No switching default storage to SD card
No data connection
Great ROM i've try on my HAM....but i got problem on cellular data connection, it wont connect except using wifi
please help...
tarakus said:
Hello, I tested this ROM.
This is a multilingual ROM.
NFC is not supported.
Missing SIM conection method for wireless network 802.1xEAP
I can not move applications to the SD card.
The GAPPS installed without problem.
Everything else works fine for now.
Click to expand...
Click to collapse
you don't need to move apps to sd card, Huawei knows that this mate 1 has tiny internal storage, so the rom given an option to set your default storage location in external sdcard. Go to settings > Storage, and you will see the option.
i have this one on my device and i think its smoother and more stable than previous post plus kang features.
to enable one hand ui modify the following line in /system/build.prob
ro.config.hw_singlehand = 2
Link: pan.baidu.com/s/1o6MCOR4
Password: 21nu
thanks to google translation :
ROM Name: Mate EMUI 3.0 B706
ROM size: 707 M
Adapter Version: EM UI 3.0 B706
Test models: MT1-U06
About the Author: HRT team _KangVIP
Support Forum: Pollen Club ( http://cn.club.vmall.com )
Release date: 2014/11/27
This version is based on the official P6 EMUI 3.0 B706 transplant modify production , and make appropriate streamlined.
New features using embedded code mode, with the original Emui perfect blend of style.
So the hardware are working.
From the XDA Mate CM11 kernel version (thank the original author)
Disclaimer: Please respect the outcome of labor prohibited on this ROM for secondary packaging! ! !
EMUI3.0 official code changes a lot, a lot of resources can not decompile, modify, greatly increased the difficulty,
do this ROM spent more than N effort.
Favorite local friends like him to support ^ _ ^
---------------------------------------- ------------------
Features:
. Automatic call recording, and remove recording tone, you can choose whether to display a message recording (audio file is saved in: sd card / record directory )
added split-screen multitasking switch (not compatible with split-screen mode to run the program (eg: Ch. ROM e), you can close the split-screen mode)
to revise the notification bar invisible switch:
You can select the ranks left / center / right home.
Tap / long press has the following options: flashlight | Shortcut menu | Screenshots | Locker | suspension program | Advanced Settings | Voice Assistant |
end of the current program | return key | Home key | Menu key | add volume | volume reduction | No Action
An operator Custom
Time centered option
kernel supports init.d script (which has built-in root).
The status bar displays the real-time speed.
Multitasking split-screen mode.
a modified version of the screen assistant to make more practical, use more smoothly:
All the keys are long press action to choose from, there are the following options:
flashlight | Shortcut menu | Screenshots | Locker | suspension program | Advanced Settings | Voice Assistant |
end of the current program | volume plus | volume down | menu key | Minimize screen assistant | No action
to increase the screen helper function minimization (via long press to achieve), watching movies or playing games can be displayed as a small dot
screen memory assistant position, reopened after closing (also the case after the restart the phone) before the position is consistent with the close
Join ZTE screenshots (via long press to achieve), when shots directly matting, graffiti and other
navigation bar to join the lock screen button, you can adjust the height and completely hidden.
Home key, back key, task keys, menu key, press the function selection
has the following options:
flashlight | Shortcut menu | Screenshots | Locker | suspension program | Advanced Settings | Voice Assistant |
end of the current program | volume plus | volume down | Menu key | No action
lock screen button when you need to display the menu button will automatically hide, the key position does not move, keep beautiful. Modify the size of desktop icons for 96dpi look more beautiful when the occasional splash screen, the screen brightness can be adjusted manually
...
---------------------- -------------------------------------------------- ------------------------------
new features and optimized as follows:
1, the navigation bar to join the lock screen button, Home, Returns tasks, long press function key menu options
2, the navigation bar height of their choice (24/36/40 / default and completely hidden), modified with immediate effect.
3, the battery icon set has the following options:
Default
does not display percentages.
show only a percentage.
Hidden percentage and icons.
toroidal power icon.
4, the status bar displays real-time network traffic, there are the following options:
Hide
Show only upload traffic.
Show only download traffic
also shows upload / download traffic.
5, modified ZTE screen assistant (see the specific effects of the drawings):
All the action can long press the button to select
6, adding close up tone switch, disable google service options
7 Restart menu option added to restart Recovery / Fastboot mode.
8, the power to customize menus and add flashlights and screenshots option
9, the pull-down notification bar calendar display
drop-down notification bar:
Click time to enter the alarm settings, press enter date settings
. Click on a date into the calendar, press to enter the date setting
10 time position to join the notification bar invisible power button, you can customize whether to use.
11, joined the operator to customize the display settings.
12, the new volume keys wakeup option (no need to modify any key)
13, joined APP window operation mode, you can also start multiple app windows, and you can move the zoom window size and position.
(Mainly transplanted from mokee, part reference code F major, big thank F)
After starting in windowed mode, the program will appear in the left three buttons:
Press and hold the button on the bottom of the window size can be scaled
and hold the center button to move window position
click on the top of the button to close the current window
split-screen multitasking currently still in WIP (work in progress) Some app does not support, follow-up will continue to follow up ...
...
others do not remember ^ _ ^
Click to expand...
Click to collapse
Drawings (from the telecommunications Edition) and a brief description:
Continuous Click the version number to open the "Developer Options"
split-screen multitasking start method:
(off by default, you need to open the Advanced Settings)
in the task bar long as needed The program started in windowed mode, and click the Start window mode, the program will open a window mode, and the emergence of three buttons on the left, hold down the button below the zoom window size, press and hold the center button to move the window position, click on the uppermost button to close the current window.
Enabling suspension program: Press-screen menu button (you can define your own specific key), the pop-up shortcut menu and select the program to the suspension
of new features, mainly in the "Advanced Settings" inside.
If some buttons do not appear to enter: Advanced Settings> Reset the system interface reset once.
The default screen, long press the return key aide, aide screen icon changes to a point, can be restored to their original length by
default long press the screen button to start the task assistant screenshots (specific buttons can be customized button)
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Brush risk, please make a backup before Brush!
Many local friends test feedback, Unicom | Mobile Edition can be directly brush, normal use!
-------------------------------------------------- -------------------------
Brush require third-party REC, you can download the following link REC (REC official support brush back)
CWM Chinese version REC: pan .baidu.com / s / 1mgj1rS0
: Perform inside Run.bat, then follow the prompts. -------------------------------------------------- ------------------------------
has brush into third party Recovery (CWM, TWRP, etc.) of the local Friends of the following cards can brush brush Version:
card brush version Download:
Hide the contents of this post
Links: pan.baidu.com/s/1o6MCOR4
Password: 21nu
Card brush package without decompression, the direct use of third-party REC brush into the can! ! !
-------------------------------------------------- ---------------------------------------
brushing can be no double-wipe, can not boot or then you can have a double wipe baffling problem.
-------------------------------------------------- ---------------------------------------
As many resources can not be decompiled, some resources with 16 ary modified. Do this ROM spent more than N effort.
Some built-in software, you can enter streamlined according to their needs.
Unwanted apk, you can uninstall or to your / system / app to delete (KangVIPTools.apk mainly used to implement advanced settings function, you can not delete) the / directory.
Note: Do not modify the system version number information, so as not to appear abnormal.
1. This ROM is published by Huawei pollen club HRT team, please indicate.
2. Brush risk, the process need to be cautious. Please strictly follow the instructions or tips related to the consequences of the operation, the brush caused by the owner's own commitment has nothing to do with the team and individuals.
3. If bug or a private letter, please reply to the thread
4. The final interpretation of all pollen club
Click to expand...
Click to collapse
mazi_v said:
i have this one on my device and i think its smoother and more stable than previous post plus kang features.
to enable one hand ui modify the following line in /system/build.prob
ro.config.hw_singlehand = 2
Link: pan.baidu.com/s/1o6MCOR4
Password: 21nu
thanks to google translation :
Rom is very smooth, thank you! Just curious, does anyone know how to change the DPI? I can't find the usual command line in the build prop.
Edit: solved. Just added the command line.
Click to expand...
Click to collapse
does this rom support english language ?
Javadn said:
does this rom support english language ?
Click to expand...
Click to collapse
Yes.
would one of you guys upload this rom to some other uploading web services and let us who cant download from baidu get this wonderful rom ?
EDIT : downloaded , installing the rom ATM ! will tell you the results
EDIT2 : its working Smoothly , beware that this rom is not 4.4.4 its 4.4.2
how about cellular data connection..is it working?
Sent from my HUAWEI MT1-U06 using XDA Free mobile app
zlazfazkazda said:
how about cellular data connection..is it working?
Sent from my HUAWEI MT1-U06 using XDA Free mobile app
Click to expand...
Click to collapse
I was running it on the European version. 2 GB and no NFC and I had a perfect cellular data connection.
thx dude...i'll download and try to install on my HAM
Sent from my HUAWEI MT1-U06 using XDA Free mobile app
I've installed this rom but still the problem is celular data connection that won't connect..over all this ROM is very beautiful
Sent from my HUAWEI P6-C00 using XDA Free mobile app
zlazfazkazda said:
I've installed this rom but still the problem is celular data connection that won't connect..over all this ROM is very beautiful
Sent from my HUAWEI P6-C00 using XDA Free mobile app
Click to expand...
Click to collapse
I'm running my HAM on the Wind Network in Canada and I'm not having any data connection problems at all. I have the European Variant without NFC.
i don't know what is wrong, i've followed the brush procedure using TWRP...i tried 3 different MIUI3.04.4.2 ROM with INDONESIA TELKOMSEL provider but the problem still the same, do you use first model of HAM or with 2GB RAM??
zlazfazkazda said:
i don't know what is wrong, i've followed the brush procedure using TWRP...i tried 3 different MIUI3.04.4.2 ROM with INDONESIA TELKOMSEL provider but the problem still the same, do you use first model of HAM or with 2GB RAM??
Click to expand...
Click to collapse
Mine is the the European 2 GB variant with no NFC.
---------- Post added at 02:15 PM ---------- Previous post was at 01:54 PM ----------
zlazfazkazda said:
i don't know what is wrong, i've followed the brush procedure using TWRP...i tried 3 different MIUI3.04.4.2 ROM with INDONESIA TELKOMSEL provider but the problem still the same, do you use first model of HAM or with 2GB RAM??
Click to expand...
Click to collapse
Maybe you need to add the APN?
i already did add the apn but not working...i'll wait for the developer wondering to solve the problem
Mine is Indian version 2gb ram wid no NFC.....4 days no data connection on...only on wlan
Sent from my HUAWEI P6-C00 using XDA Free mobile app
shaun100689 said:
Mine is Indian version 2gb ram wid no NFC.....4 days no data connection on...only on wlan
Sent from my HUAWEI P6-C00 using XDA Free mobile app
Click to expand...
Click to collapse
That's strange. Mine works great for data connection, aside from the fact that I couldn't customize using xposed and gravitybox. Maybe its because my network is Wind Canada and we run off of an AWS frequency? Not sure, well sorry about your luck people. I wish I had an answer to help you guys. Oh, plus it ate my battery 3 to 4 times faster when using as a daily driver.
This ROM is great!!! One day in and so far everything works for me (everything I've tried out that is). Only issue so far is a delay on incoming calls before the screen comes up allowing you to answer. I actually missed 2 calls waiting for it to come up.
Also, calendar force closes, but I think I caused that, I tried to restore my data using Titanium Backup from my previous B930 ROM. Going to reflash calendar using the aroma GApps installer and see if that fixes it.
Great job on this ROM man!!!!
Sent from my MT1-U06 using Tapatalk 2
Password.
Please!
Anyone know the password?...
Thank You.
hasbrone said:
Please!
Anyone know the password?...
Thank You.
Click to expand...
Click to collapse
YES! Everyone who read the 5 line on the FIRST post!
huggy_72 said:
YES! Everyone who read the 5 line on the FIRST post!
Click to expand...
Click to collapse
Thank You.
But, asked for the password to unzip the zip...
Anyone know ...
You can edit the build.prop to change the DPI (to 241)?
This is my screenshot: (see attached)
hi all. kang emui 3.0 b708 port for mate1 unicom.
download Links: pan.baidu.com/s/1qWHjSMo
Password: ni3x
ROM Name: Mate EMUI3.0 B708 stable version
ROM size: 698 M
Adapter Version: EMUI3.0 Standard Specification for
Test models: Mate-U06
About the Author: HRT team _KangVIP
Support Forum: Pollen Club ( http://cn.club.vmall.com )
Release date: 2014/12/29
This version is based on the official (P6) EMUI 3.0 stable version Standard Specification for making modifications , and make appropriate streamlined.
Desktop icon size is amended as 96dpi, icon arrangement 5X5.
New features using embedded code mode, with the original Emui perfect blend of style.
Disclaimer: Please respect the outcome of labor prohibited on this ROM for secondary packaging! ! !
Favorite local friends like him to support ^ _ ^
---------------------------------------- ------------------------------------------
thank: XDA gold-Concert compiled v5 version of the core, improve the splash screen problem.
-------------------------------------------------- --------------------------------
------------------ ----------------------------------------
12.29 update Description:
The upper corrected version bug
The update package to the official end of the stable version B708
Modify navigation lock screen button, click the drop-down notification bar, press the lock screen. According to their need to modify the advanced settings other do not remember ...
----------------------------------- ----------
new features and optimized as follows:
kernel support init.d script, and has built-in root privileges
to join the game mode (pull-down shortcut buttons), after opening the game can improve fluency.
condition. Bar time option, can be centered and hidden.
. Join automatic two-way conversation recording, and remove the recording tone can be set to automatically record calls end, the message does not display the recording
navigation bar to join the lock screen button, you can adjust the height and completely hidden.
Home key, back key, task keys, menu key, press the function selection
has the following options:
flashlight | Shortcut menu | Screenshots | Locker | suspension program | Advanced Settings | Voice Assistant |
end of the current program | volume plus | volume down | Menu key | No action
is required when the lock screen button to display the menu button will automatically hide
the status bar double-click action:
The following options are available:
flashlight | Shortcut menu | Screenshots | Locker | suspension program | Advanced Settings | Voice Assistant |
end of the current program | return key | Home key | Menu key | Volume plus | volume reduction | No action
button long press options, vibration intensity settings, etc.
Long press function has the following options:
flashlight | Screen assistant | Screenshots | Locker | suspension program | Task List | voice assistant |
end of the current program | Power Menu | add volume | volume reduction | No action
battery icon set has the following options:
Default
does not show the percentage of
display only the percentage of
the hidden percentage and icon
optional battery icon (two kinds)
top-linear power
. The status bar displays real-time network traffic, there are the following options:
Hide
Show only upload traffic.
show only download traffic.
At the same time show the upload / download traffic.
Modify the ZTE-screen assistant (see the specific effects of the drawings):
All keys long Press the action has the following options:
flashlight | Shortcut menu | Screenshots | Locker | suspension program | Advanced Settings | Voice Assistant |
end of the current program | volume plus | volume down | menu key | Minimize screen Assistant | No action
to increase the screen assistant minimization function (via long press to achieve), watching movies or playing games can be displayed as a small dot
screen memory assistant position, consistent reopen after closing (also the case after the restart the phone) and a closed position before
adding ZTE shots (by length a realization), when shots directly matting, graffiti
. Join shut up tone switch, disable google services and other options
. pulldown restart restart option added to Recovery / Fastboot mode.
. Power menu customization and add flashlights and screenshots options
drop down notification bar calendar display
Click time to enter the alarm settings, press enter date setting
Click on a date into the calendar, press to enter the date set
notification bar added invisible button:
you can select Left / center / right home.
Tap / long press has the following options:
flashlight | Shortcut menu | Screenshots | Locker | suspension program | Advanced Settings | Voice Assistant |
end of the current program | return key | Home key | Menu key | add volume | volume reduction | No Action
. Join operators to customize the display settings.
Added volume keys wakeup option (no need to modify any key)
. added split-screen multitasking mode, you can also start multiple app windows, and you can move the zoom window size and position.
(Mainly transplanted from mokee, part reference code F major, big thank F)
After starting the split-screen mode, the program will appear in the left three buttons:
Press and hold the button on the bottom of the window size can be scaled
and hold the middle button moving window position
click on the top of the button to close the current window
is currently split-screen multitasking is still in WIP (work in progress) Some app does not support, follow-up will continue to follow up ...
...
others do not remember ^ _ ^
Drawings and brief description:
Continuous Click the version number to open the "Developer Options"
split-screen multitasking start method:
In the task bar window mode press and need to start a program, and click the Start window mode, the program will be windowed mode open, and the emergence of three buttons on the left, hold down the button below the zoom window size, press and hold the center button to move the position of the window, click on the uppermost button to close the current window.
Enabling suspension program: Press-screen menu button (you can define your own specific key), the pop-up shortcut menu and select the program to the suspension
of new features, mainly in the "Advanced Settings" inside.
If some buttons do not appear to enter: Advanced Settings> Reset the system interface reset once.
The default screen, long press the return key aide, aide screen icon changes to a point, can be restored to their original length by
default long press the screen button to start the task assistant screenshots (specific buttons can be customized button)
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Brush risk, please make a backup before Brush!
-------------------------------------------------- -------------------------
Brush require third-party REC, you can download the following link REC (official support brush back 3.0 REC)
CWM Chinese version REC: pan.baidu.com/s/1o6kIZHo
: Perform inside Run.bat, then follow the prompts. -------------------------------------------------- ------------------------------
has brush into third party Recovery (CWM, TWRP, etc.) of the local Friends of the following cards can brush brush Version:
card brush version Download:
Links: pan.baidu.com/s/1qWHjSMo
Password: ni3x
Card brush package without decompression, the direct use of third-party REC brush into the can! ! !
-------------------------------------------------- ---------------------------------------
NOTE: The recommendation is based on EMUI 3.0 version Brush! ! !
Brushing can be no double-wipe, when you can not boot or baffling question then double wipe can be.
-------------------------------------------------- ---------------------------------------
As many resources can not be decompiled, some resources with 16 ary modified. Do this ROM spent more than N effort.
Some built-in software, you can enter streamlined according to their needs.
Unwanted apk, you can uninstall or to your / system / app to delete (KangVIPTools.apk mainly used to implement advanced settings function, you can not delete) the / directory.
Note: Do not modify the system version number information, in order to avoid abnormal situation! ! !
1. This ROM is published by Huawei pollen club HRT team, please indicate.
2. Brush risk, the process need to be cautious. Please strictly follow the instructions or tips related to the consequences of the operation, the brush caused by the owner's own commitment has nothing to do with the team and individuals.
3. If bug or a private letter, please reply to the thread
4. The final interpretation of all pollen club
Click to expand...
Click to collapse
Edit: figured it out.
Can i change the launcher?
It's using Gold-Concert Angel Kernel v5 3.0.8
anyone knows if it supports ext4 or not ?
This ROM is great. Having one problem though. The call answering screen takes too long to come up. By the time it comes up sometimes the call has already gone to voicemail.
Is there a fix for this?
Sent from my MT1-U06 using Tapatalk 2
Awsome :good::good::good:
Guys? How do I install this ROM?
Currently downloading the file and it says 10h remaining, so while i'm waiting I was reading the instructions but i can't figure what all the "brushes" mean.
I assume this text was translated from chinese but I don't understand. Is it just flashing in TWRP or has it something to do with that REC?
Bartcore3 said:
Guys? How do I install this ROM?
Currently downloading the file and it says 10h remaining, so while i'm waiting I was reading the instructions but i can't figure what all the "brushes" mean.
I assume this text was translated from chinese but I don't understand. Is it just flashing in TWRP or has it something to do with that REC?
Click to expand...
Click to collapse
Brushing means wipe, you nave to wipe data,cust,system,cache and dalvik and if you have no important data you can also wipe internal storage.
Then you can flash this ROM and Gapps.
---------- Post added at 08:55 PM ---------- Previous post was at 08:51 PM ----------
Bartcore3 said:
Guys? How do I install this ROM?
Currently downloading the file and it says 10h remaining, so while i'm waiting I was reading the instructions but i can't figure what all the "brushes" mean.
I assume this text was translated from chinese but I don't understand. Is it just flashing in TWRP or has it something to do with that REC?
Click to expand...
Click to collapse
Brushing means wipe, you nave to wipe data,cust,system,cache and dalvik and if you have no important data you can also wipe internal storage.
Then you can flash this ROM and Gapps.
One reply was enough
And that makes sense now (brush = wipe)
I've wiped internal storrage to but no progress. What version of TWRP do you use? I have 2.6.3.0 I think but i saw there's a 2.6.3.3 now.
Also, download failed after 20h of downloading and i don't feel like trying to retry. Someone has a copy?
Bartcore3 said:
One reply was enough
And that makes sense now (brush = wipe)
I've wiped internal storrage to but no progress. What version of TWRP do you use? I have 2.6.3.0 I think but i saw there's a 2.6.3.3 now.
Also, download failed after 20h of downloading and i don't feel like trying to retry. Someone has a copy?
Click to expand...
Click to collapse
I am using this modified version by @gold-concert http://hdgrp.blogspot.it/2014/12/teamwin-recovery-usb-otg-supprot-huawei.html?m=1
If you want to try this ROM there is one (based on b708)from another server:
http://hdgrp.blogspot.it/2014/12/huawei-mate-emui-3-android-44-b708.html?m=1
hi guys
after i install Gapps and restart my phone,this error show up: "unfortunately,google Play services has stopped"
what should i do
i install this gapps:
http://forum.xda-developers.com/showthread.php?t=2547250
At the bottom of the article MounirHero sent me, you'll find a link for GAPPS.
Try this one
Bartcore3 said:
At the bottom of the article MounirHero sent me, you'll find a link for GAPPS.
Try this one
Click to expand...
Click to collapse
thank u
what should i do?
i install this one on this installed gapps?
Did you allready installed other apps? (I'm assuming you're on the b708 now?)
Bartcore3 said:
Did you allready installed other apps? (I'm assuming you're on the b708 now?)
Click to expand...
Click to collapse
right now
i do this:
Reboot on recvovery
Wipe all.
Instal the ROM in the first page of the post
Wipe dalvin chache
Reboot.
Reboot on recvovery
install the gapps for 4.4
Wipe dalvin chache
Reboot
nothing else
Sound like you're doing nothing wrong. what ROM is it? The one OP posted or the one from MounirHero?
I'm not at home FTM but I'll try to test it as soon as possible
Bartcore3 said:
Sound like you're doing nothing wrong. what ROM is it? The one OP posted or the one from MounirHero?
I'm not at home FTM but I'll try to test it as soon as possible
Click to expand...
Click to collapse
i install the one OP posted
this link:
pan.baidu.com/s/1qWHjSMo
thanks bro
Try this one, will you? That's all I can think of for now..
(Don't forget to click the thanks button)
Bartcore3 said:
Try this one, will you? That's all I can think of for now..
(Don't forget to click the thanks button)
Click to expand...
Click to collapse
Ok i will download it
thanks
pooya.king said:
Ok i will download it
thanks
Click to expand...
Click to collapse
I got home and installed this ROM and they both work fine! No problem with GAPPS.
the only thing I'm trying to figure out is his to change the dpi settings. It's a huge screen and everything is zoomed in!
Use as always at your own risk!
This Rome is for the MT7-L09, but originally comes from MT7-L10 (Asia). According to previous experiences it only runs on the Asian MT7 - L10 and the MT7 - L09. KangVIP offers Rome but also for other versions.
So if a MT7-L09 has can use it.
Since I have no Mate 7 more, I can not even try! Experience has shown that it should run. Here I would welcome feedback.
Also running again with Vodafone.
Prerequisite:
The bootloader must be open.
TWRP
GApps
Source
New:
MT7-TL10 B357 Kangvip
(Only the Rom, then restart, then flash the patch.)
Old:
MT7-TL10 B354 Kangvip V3A
UI Patch
(Update on V3a. What has changed, I can not say. Who has the V3 plan, should the patch no longer need, who comes from another already. Is this as an extra download.)
MT7-TL10 B354 Kangvip V3
(Only the Rom, then restart, then flash the patch.)
MT7-TL10 B354 Kangvip v2A
(Only the Rom, then restart, then flash the patch.)
MT7-TL10 B354 Kangvip v2
(Only the Rom, then restart, then flash the patch.)
MT-TL10 B354 Kangvip
(Only the Rom, then restart, then flash the patch.)
MT7-TL10 B351 Kangvip v2
Mate7 EMUI3.1 B351
Content:
- Mate7 EMUI3.1 B351.zip
- TWRP
Installation:
- Load Rome and the Mate7.
- Mate 7 switched to the PC, go to the folder and run TWRP .bat. Thus TWRP is installed. If it does not want in the Fastboot, then switch off the appliance and run while holding Vol. Softly to the PC and then .bat.
- Ins TWRP boot and make a backup.
- Make factory reset.
- Now the Mate7 install EMUI3.1 B351.zip.
- Restart the device.
Changelog:
Code:
Again, the navigation bar height adjustment, button icons with changes in altitude change. Click on the drop-down notification bar Collapse return key
, Link click / long press (including the button, invisible button, the screen wizard, etc.) to open the custom program
, Join the status bar for the second time, day of week, and refinement show (morning, evening, midnight, chenshi etc.)
, Add the list of animations (magic fun animation) (Advanced Settings> Advanced Settings)
, Join the signal bar on the left / right of abode Options / Hide
, Connect the navigation task on UDFs long press. Join the navigation bar button, invisible button to start the slide key assistant the custom program function
, Join dpi switch setting. Alternatively, 480 (default), 460 440 420, is less dpi, the larger the field of view.
Dpi screen is displayed in a small and delicate feeling cleaner ^ _ ^
If small dpi, fast pull-down button layout automatically switches to 5 line.
Specific effects we all experience!
, Join a wifi password to see the function (Advanced Settings> Kangvip information)
, Join the navigation bar button, invisible button to start the slide key assistant the custom program function
, Join the navigation task by a long-click to select the Custom Functions
, Connect the call automatically recording, and remove the recording sound, you can set call recording ends, the recording will not receive a message
, Join calls, Flash function, you can adjust the flash frequency
The kernel supports init.d script, and has built-in root privileges
Status Bar Time option can be centered, the hidden left and right of abode and.
, Join The status bar shows the number of icon set
, Connect goggles feature, you can start from the dropdown shortcut button, or press the corresponding button to start the definition
, Join the Lunar lock screen display (in the Advanced Settings> lock screen settings on / off)
After adding the lock screen bright screen, double-click the flashlight function to open. (In Advanced Settings> lock screen settings on / off)
, Connect desktop weather calendar display
, Connect set the action to drop, by default the drop-down notification bar
The navigation bar buttons added to the lock screen, you can adjust the height and completely hidden.
Home button, back button, menu button, hidden buttons, Lock Screen button Function selection long
You have the following options:
Flashlight | Context Menu | Screenshots | Locker | Suspension program | Advanced Settings | Voice assistant |
Exit the current program | Goggle | Drop-down notification bar | more volume | Volume | Menu buttons | No action | optional program
Lock Screen button when you need to hide the display menu button automatically
Double-click the Status Bar action:
There are the following options:
Flashlight | Context Menu | Screenshots | Locker | Suspension program | Advanced Settings | Voice assistant |
Exit the current program | Goggle | Return key | Home button | Menu buttons | more volume | Volume | No action | Special programs
, Battery icon set, with the following options:
default
The percentage not show the
Only percent
Percent symbol and Hide
Top linear performance
Top percent linear performance +
The status bar displays real-time network traffic, with the following options:
Conceal
Single-line display
Also shows upload / download traffic
Change the resurgence Wizard screen (see the specific impact of the drawings):
All keys are long press action the following options:
Flashlight | Context Menu | Screenshots | Locker | Suspension program | Advanced Settings | Voice assistant |
Exit the current program | Goggle | more volume | Volume | Menu buttons | Minimize screen wizard | No action | optional program
Minimize Increase Screen Wizard function can look (by pressing the implementation), movies or play games appear as a small dot
Location assistant screen, consistent after closing (also the case after the restart of the phone) and a closed position before re-open
Join ZTE screenshots (by pressing the implementation) when shooting directly mats, graffiti etc.
Restart Options Join quick restart | Recovery Mode | Fastboot mode.
The notification bar added invisible button:
You can choose left / center / right of abode.
Tap / long press, you have the following options:
Flashlight | Context Menu | Screenshots | Locker | Suspension program | Advanced Settings | Voice assistant |
Exit the current program | Goggle | Return key | Home button | Menu buttons | more volume | Volume | No action | Special programs
, Join operator to adjust the display settings.
Added wake volume Option keys down key when the lock screen is occupied by the snapshot camera, so that only the increase in volume can activate the screen.
, Join On / Off option Mute on and off Google Services options (Advanced Settings> Advanced Settings)
Original:
重新修改导航栏高度调整，按钮图标随高度变化而变化。点击返回键收起下拉通知栏
.加入按键点击/长按（包括按键，隐形按钮，屏幕助手等）打开自定义程序
.加入状态栏时间显示秒钟，显示星期，和细化显示（凌晨，傍晚，子时，辰时等）
.加入列表动画（魔趣动画）（高级设置>更多设置）
[B].加入信号栏居左/居右/隐藏选项
.加入导航栏任务键点击很长按自定义功能选择. 加入导航栏按键，隐形按钮，屏幕助手按键启动自定义程序功能
.加入 dpi 切换设置。可选择 480(默认)，460，440，420，dpi 越小可视面积越大。
在小dpi时显示画面感觉更干净细腻 ^_^
小dpi时，下拉快捷按钮布局会自动切换为5个一行。
具体效果大家自己体验！
.加入wifi 密码查看功能（高级设置>Kangvip 信息）
.加入导航栏按键，隐形按钮，屏幕助手按键启动自定义程序功能[B].加入导航栏任务键点击很长按自定义功能选择
.加入通话自动录音并去除录音提示音，可以设置通话录音结束，不显示录音提示信息
.加入来电闪光功能，闪光频率可以调整
.内核支持 init.d 脚本，并已经内置 root 权限
.状态栏时间选项，可以居中，居左，居右和隐藏。
.加入状态栏显示图标个数设置
.加入护目镜功能，可以从下拉快捷按钮启动，或者定义长按相关按键启动
.加入[URL="http://club.huawei.com/forum.php?mod=forumdisplay&fid=455&filter=typeid&typeid=1497"]锁屏[/URL]界面农历显示（在高级设置>锁屏设置 进行开/关）
.加入锁屏界面亮屏后，双击打开手电筒功能（在高级设置>锁屏设置进行开/关）
.加入桌面天气农历显示
.加入下滑动作设置，默认为下拉通知栏
.导航栏加入锁屏按钮，高度可以调整和彻底隐藏。
Home 键，返回键，菜单键，隐藏键，锁屏键长按功能选择
有如下选项：
手电筒 | 快捷菜单 | 屏幕截图 | 锁屏 | 悬浮程序 | 高级设置 | 语音助手 |
结束当前程序 | 护目镜 |下拉通知栏 | 音量加 | 音量减 | 菜单键 | 无动作|自选程序
锁屏按钮在需要显示菜单键时会自动隐藏
.双击状态栏动作：
有以下选项：
手电筒 | 快捷菜单 | 屏幕截图 | 锁屏 | 悬浮程序 | 高级设置 | 语音助手 |
结束当前程序| 护目镜 |返回键|Home 键|菜单键|音量加 | 音量减 | 无动作|自选程序
.电量图标设置，有如下选项：
默认
不显示百分比
只显示百分比
隐藏百分比和图标
顶部线形电量
顶部线形电量+百分比
.状态栏实时网络流量显示，有如下选项：
隐藏
单行显示
同时显示上传/下载流量
.修改了中兴屏幕助手（具体效果看附图）：
所有按键长按动作均有以下选项：
手电筒 | 快捷菜单 | 屏幕截图 | 锁屏 | 悬浮程序 | 高级设置 | 语音助手 |
结束当前程序 |护目镜 | 音量加 | 音量减 | 菜单键 | 最小化屏幕助手 | 无动作|自选程序
增加屏幕助手最小化功能（通过长按实现），在看电影或玩游戏时可以显示为一个小点
记忆屏幕助手位置，关闭后重新打开位置与关闭前一致（重启手机后也如此）
加入中兴截图（通过长按实现），截图时可以直接抠图，涂鸦等
.重启选项加入 快速重启 |Recovery 模式 | Fastboot 模式。
.通知栏加入隐形按钮：
可以选择居左/居中/居右。
点击/长按均有以下选项：
手电筒 | 快捷菜单 | 屏幕截图 | 锁屏 | 悬浮程序 | 高级设置 | 语音助手 |
结束当前程序| 护目镜 | 返回键|Home 键|菜单键|音量加 | 音量减 | 无动作|自选程序
.加入运营商自定义显示设置。
.新增音量键唤醒选项，锁屏时音量减键被相机快拍占用，所以只有音量加可以唤醒屏幕。
.加入开/关机静音选项和关闭Google相关服务选项（高级设置>更多设置）
If you must back on a Stock Recovery, simply .bat in TWRP perform folder and choose. 2
As it is written, I would appreciate feedback.
IT WORKS
It is working really good on my MT7-L09, nice ROM it fixes the bugs that B324 had... the only thing its that there is no Gapps and there is a lot of chinese stuff... easy to unistall anyway....
It really is for the Chinese market, but quickly resolved. Thanks for the feedback.
Soo is it possible to flash Gapps on this rom? Are there problems with network?
On Kang roms there are always some things still in chinese, how is it in this one?
Would you consider this rom as better than Stock Kitkat?
Which model do u have. (didn't see that you already wrote it)
Sorry for asking so many questions, but I don't want to risk bricking this device
because there aren't many experts here who could help me in the worst case.
You can flash open gapps (not pa gapps) without any problem, i have not any network problems, everything is in spanish in my case except chinese apps, i think it is a little better, but if you are ok on kitkat this is not that different... it is almost the same...
Tazmaniiac said:
Soo is it possible to flash Gapps on this rom? Are there problems with network?
On Kang roms there are always some things still in chinese, how is it in this one?
Would you consider this rom as better than Stock Kitkat?
Which model do u have. (didn't see that you already wrote it)
Sorry for asking so many questions, but I don't want to risk bricking this device
because there aren't many experts here who could help me in the worst case.
Click to expand...
Click to collapse
dirty flash in 324, everything works fine, a lot of chinese apps but removed with root privilegies.
Any diff over 324
many thanks for this rom.
is there any differences between 324 ( features,battery life and smoothness).
I tested this rom yesterday. The rom has a lot of nice features, however, there are too many Chinese apps. If someone could remove all the Chinese apps this rom would be awsome.
Good rom, but after having changed the langage settings some things stay in chinese.
How can I change this ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Envoyé de mon JAZZ en utilisant Tapatalk
gui3gui said:
Good rom, but after having changed the langage settings some things stay in chinese.
How can I change this ?
Envoyé de mon JAZZ en utilisant Tapatalk
Click to expand...
Click to collapse
The one in the right of the date is moon phases, you can disable it in advance settings->Lockscreen settings.
The bottom one i dont know, i think it is slide to unlock or something like that, in some themes is in english and in other in chinesse
Unfortunately, this can not be changed. In this issue you have to open it manually and rewrite.
Maybe someone could port some of the awsome features of this rom. For example, the ability of changing the DPI setting without altering the navigation bar position. Also, the option of resizing the navigation bar. Another cool feature is that you can add the network speed to the notification bar.
thanks...
Fooox1 said:
Unfortunately, this can not be changed. In this issue you have to open it manually and rewrite.
Click to expand...
Click to collapse
Thank you for this rom......everything works fine ...only thing is the chinese stuff.......can u help with what you said to open it manually and
rewrite....i mean how to do that.....
Get rid of chinese language
Got rid off those chinese stuff using the below methods.
1. Used tb to freeze those chinese apps.
2. There is some chinese writing still present on lock screen .to stop that follow the below step.
Settings-advanced settings-lock screen and desktop settings---untick the lunar calendar--done.
before you install make sure you make a backup.its works great!!!
Well, I've installed several times and nothing ... It seems all right, but stays stuck or a screen lock or unlock asks me sim ... ?
Sent from my HUAWEI MT7-TL10
Enviado desde mi HUAWEI MT7-TL10
Will it be possible to make this ROM based on L09 firmware? Maybe only a copy/paste apk's and a few little edition is needed.
That way we won't have all the Chinese stuff and maybe the rom would be lighter
Enviado desde mi HUAWEI MT7-L09 mediante Tapatalk
You can help me please? THX
Enviado desde mi HUAWEI MT7-TL10
There's a new version (v2) on chinese forum. Can we flash this on our L09? Thanks! @Fooox1
Yes you can, everything runs on the TL10 is running, on the 09.
http://cn.club.vmall.com/forum.php?...=page=1&filter=typeid&typeid=1368&typeid=1368
@blackjack_la
The V2 I add tomorrow with.