Related
Hey there people, nice to see flood of very good roms for our BAs around the forum any beyond. However, some of them do have issues, such as SMS notifications (I try to deal with those using Smiley SMS), but very annoying in some issues is also the alarm clock, which sometimes simply fails to work, and that can be very annoying.
Therefore, does anyone can recommend some good alarm clock application which will work reliably on WM 6 (ROM 5.63.11).
Thanks
whats wrong with the wm06 built in alarm clock?
Try pTravelAlarm http://www.burroak.on.ca/pta.html
For me GS Alarm Clock is the best...and it's free
SPB time 2 its OK
I was lookin' 4 a good alarm for about 2weeks and then I've found its really good. you can choose whole mp3. Pocketalarm http://rapidshare.com/files/18010275/PocketAlarm.v2.16.rar.html
Thanks for good suggestions people, I really had a hard time, since for some stupid reason the built in alarm clock was highly unreliable - sometimes it works and sometimes it didn't even though everything was set correctly (which led to me being late for work and a bug in the ROM cannot be used as an excuse ). It could be because of the ROM I am using. I tried all of those you suggested and GS is really neat.
Thanks everyone for a lot of help.
alsaliho said:
Hey there people, nice to see flood of very good roms for our BAs around the forum any beyond. However, some of them do have issues, such as SMS notifications (I try to deal with those using Smiley SMS), but very annoying in some issues is also the alarm clock, which sometimes simply fails to work, and that can be very annoying.
Therefore, does anyone can recommend some good alarm clock application which will work reliably on WM 6 (ROM 5.63.11).
Thanks
Click to expand...
Click to collapse
There is absolutely no problem with WM6 Alarm system.
I thoroughly checked it up and noticed following correct behavior:
1. System updates registries as soon as any alrm settings are changed
2. Notification queues are issued for the week replacing any other available for the week.
I am positive that system is working correctly.
What must have gone wrong with some of your devices that you must have taken system backup without clearing alarm settings totally and must have later on after hard reset, restored the backup. This would reinstall old queues as well new when you setup new alarms. You can get away with this issue by clearing all those notification queues still residing in the database.
If this works for you, make sure you always takeback with no alarms settings.
Thanks for the info, however, anytime I did new rom upgrade I did it without doing any backup, which means all settings were manually set after the upgrade - which means no backups to mess up the settings. Oh well, not a big deal anyway, as I said in my previous post that GS Alarm Clock, which I took later works perfectly.
Thanks anyway,
hi everyone!
is there a way to add custom sounds for the wm06 built n alarm clock?
and maybe for the reminders too?
if i move wav files to the windows folder, those file names show up in the sounds drop down menu, but wont play....
anyone?
regards,krz
Are you sure they are the correct wav files?
April 1 said:
Are you sure they are the correct wav files?
Click to expand...
Click to collapse
well... at least, i am sure, that they are WAV files and i can play them back in TCMP!
are there certain specifications, that wav files have to meet in order to be used as an alarm clock sound...? (eg.: max. file size, mono/stero, quality,...) ??
is it confirmed,that this should actually work that way (meaning to copy a wav file into windows folder for alarmclock use) ??
answers appreciated!
regards,krz
EDITED TO SAY: okay, it seems, that size, etc. does matter! i just got one working (redalert.wav)
anyone knows the excact secifications for working wav files...? is it just the size? or maybe the length of the file too?
Sound control
The problem i always had with the BA is the fact that the alarm would not go off if the phone is on silent. Which i keep my phone on most of the time, So when i forget to turn it on at night... I get get to yell "Oh Crap, Look at the time" to my wife.
Is there a program that will make sure the alarm goes off even if the sound is silent,
or is there a program that will change the sound at certian times, like at 6am turn sound on, at 9am turn sound off, then at 6pm turn sound on again?
Thanks
Again,
I must advise SPB Time, I do realise it isn't a free app but it's to my opinion the best, define as much alarms as you want, select mp3's or anything, it puts your volume to maximum if you choose so, or play ascending... and my favorite, upon alarm your comploete screen blanks and you have 2 huge buttons snooze and dismiss which you can't miss even with only 1 eye open... ;-)
The best is PocketAlarm. Try it u wont regret it. Link is on the first page. u can choose mp3 files not only wav.
I have just started using SPB Time... its a great program. You can set up as many alarms as you need, have them go off on certain days of the week. Everything is customizable, the repeats, the time it plays, length of snooze.
When the alarm goes off, there are nice large dismiss and snooze buttons.
nobody is talking about program size and memory usage on device, two criterias, which are very important for such a program....
which one is the smallest and lightest?
interessted,
krz
The cab for SPB Time is approx 4.42mb. Memory usage is not really a problem because the program doesn't need to be running for the alarms to work.
Pocket Alarm can not be used if you lock your phone it seems. Phone first has to be unlocked, which is not the case with e.g. ptravelalarm.
Alarm Clock Lite is free
For PPC and SP
CT Alarmclock is free to, only for SP
SpoonAlarm is free too. For all devices also 240*240 screens
I'm looking for a basic countdown timer for the TP2 - e.g. for cooking and short-term reminders. I've tried Conduits Timekeeper but for some reason the alarm doesn't sound.
A free solution would be a bonus - can anyone recommend something that's tried and tested with the TP2??
itm said:
I'm looking for a basic countdown timer for the TP2 - e.g. for cooking and short-term reminders. I've tried Conduits Timekeeper but for some reason the alarm doesn't sound.
A free solution would be a bonus - can anyone recommend something that's tried and tested with the TP2??
Click to expand...
Click to collapse
I use a program called G-Watch. It does a countdown, as well as a stopwatch.
I attached the file, and it's free.
Thanks - this looks great. I have just one question - do you know if there is a way to tell it to start in Countdown mode by default (rather than Stopwatch mode)? I can't see this anywhere in the options.
I only want to use it as a countdown timer, so this would save me a few clicks every time I wanted to use it.
itm said:
Thanks - this looks great. I have just one question - do you know if there is a way to tell it to start in Countdown mode by default (rather than Stopwatch mode)? I can't see this anywhere in the options.
I only want to use it as a countdown timer, so this would save me a few clicks every time I wanted to use it.
Click to expand...
Click to collapse
I tried to see if I could switch it, but I don't think it's possible.
Hi,
I have a small challenge for coders. Nothing complicated I think I was in the situation: walking to the train station running out of time a bit and I want to know what time is it. But pulling out PDA, switching display on a then these actions backwards I get an idea. What about to do a small application that would be running in background(can't be seen in f.e. WkTask... I think you know what I mean) And when I shake the phone it will literally tell me the time. So this is the basic idea. I think It would be also good to add a tab in setting, where you can set the sensitivity(power) of shaking needed. I know it would need some library with these sound, but If you are able able to deliver me the program and how the sound files should be named, I will make my own sound files. So if anyone is able to do this a would do it please email me on [email protected] so we can negotiate on the sound files and other things. Thanks a lot
Vasquez
I seem to recall a program called Vasquez Talk To Me - which was a talking clock program. If memory serves there was a program shortcut that spoke the time out loud (and did nothing else) - so that could be mapped using some other app. to run when the phone is shaken etc.. I'm sure a quick "google" for Vasquez Talk To Me will help you out!
G alarm has a talking clock component that is a separite install, I think ?.... check there website, free to download I think, though obviously u need G alarm, not sure weather this is just talking alarm or clock...?
naa77 said:
G alarm has a talking clock component that is a separite install, I think ?.... check there website, free to download I think, though obviously u need G alarm, not sure weather this is just talking alarm or clock...?
Click to expand...
Click to collapse
G-Alarms is only talking the time during an alarm. So it can´t be used for this request.
thanks guys... going to look on it
As the title says, Im a developer but I dont know anything majorly complicated.
I want YOUR ideas for something to make.
Stuff I know:
Things to do with the file system - copy, paste, delete, create etc
Read/write/create text files
Simple or even more complex UIs (nothing too extreme though)
most of the basic stuff
Heres a video of stuff Ive done before:
http://www.youtube.com/watch?v=g3_5xBqf-eQ
If you have any idea for simple apps, please let me know and Ill tell you if I can make them or not
Thanks
Maybe a new app to replace and improve SmileySMS ( development is stopped, and on windows mobile we can't have smileys in sms without this buggy app).
I wish a prog for my HD2, very simple : Use Webradio (with url) as ringtone !
Hi Cris,
I am looking for an app that can do the following:
Disable the touchscreen.
Why?
It's annoying when you watch movies and accidentaly touch the screen (especially with core player).
The app would have to disable the touchscreen after a set time, so you have enough to start the movie (or other application).
A certain area of the screen would have to be defined as touchable, so that you can disable again. Maybe with a gesture? ie. swipe from bottom left hand corner to top right???
just an idea
idea
it would be amazingg if you could make an application that allows the drag down notifications panel like android has
antdawg702 said:
it would be amazingg if you could make an application that allows the drag down notifications panel like android has
Click to expand...
Click to collapse
you know what, im gonna look into this one.
I cant promise anything.
I cant say I have any idea how to do that.
but I can say that im gonna look into it ^_^
wm7
can you make a windosmobile7series for nontouchscreen windowsmobile.need help with it.its just navigaating threw it with the arrow keys
Hi Cris,
Can I suggest a application that can do 2 things which I can't find something similar to this (suggestion).
To create a application for both "Shopping List" + "Inventory".
Let me know if you interested, I can share the idea ..
Hope you can consider it .. thanks
antdawg702 said:
it would be amazingg if you could make an application that allows the drag down notifications panel like android has
Click to expand...
Click to collapse
do you have a screenshot?
how about an application like e-mail and walk for the iphone..........so that wed be able to type and walk at the same time with the background being whats in front of us fed by our camera....
I would like a app that does the following:
All for the Sense music tab!
When NOT in a call:
Long press : Play / pause
Pressed twice : Next song
(If possible:
Pressed three times: previous song
pressed shot : call)
When you are being called:
short press: pickup / hangup
PLUS
The hardware buttons (buttons on the PHONE) MUST be disabled,
But ONLY when the headset is plugged in!
With no headset plugged in everything should be as normal!
Could some developer please make this?
Maybe you can use code from the following:
http://forum.xda-developers.com/showthread.php?t=502881
http://forum.xda-developers.com/showthread.php?t=556801
Great Greet Giblet
I've actually been pitching this one around but no luck yet ... A small GPS toggle cmd app. Here's an OSS project that may have usefull code.
What I would like it to have is:
1- Commands to toggle GPS on or off
2- Stay running and output number of connected satellites and connection status (position fixed/not fixed) as a reg name/value
3- Maybe other stuff (like coordinates, hour/date, update system time... but what I really want is the first point 1 and 2).
Why would I want such an app? To add a GPS connection manager to my today screen HS++ skin (also maybe make a script that will only launch my device navigation software when it has a position fix).
PS:
Other stuff I'd like to see are either other small cmd apps or small updates/fixes of some OSS apps like GSFinder+ or even emulators (small stuff like adding onscreen controls using existing sources, emulate mutli touch or improving controls by mixing the use of oncreen keys with hw ones or minor GUI standardization and fixes related with new devices screen resolution).
cris_rowlands said:
As the title says, Im a developer but I dont know anything majorly complicated.
I want YOUR ideas for something to make.
Stuff I know:
Things to do with the file system - copy, paste, delete, create etc
Read/write/create text files
Simple or even more complex UIs (nothing too extreme though)
most of the basic stuff
Heres a video of stuff Ive done before:
http://www.youtube.com/watch?v=g3_5xBqf-eQ
If you have any idea for simple apps, please let me know and Ill tell you if I can make them or not
Thanks
Click to expand...
Click to collapse
OK here is an idea for a simple but useful application please would you consider making this
http://forum.xda-developers.com/showpost.php?p=5711236&postcount=1
Slide2Action
Hi cris, How about a simple slide to do anything? Just a scrollable list of blank sliders that you can assign a function too, eg launch an app, blank screen, reset, close all, new message, WiFi, bluetooth etc. the list could be endless. Just a scrollable action screen with sliders instead of buttons. Transparency would be a bonus for a nice visual.
well folks, youve given me plenty of ideas.
A few of them ill try to work on, sadly many of your ideas are a little beyond me
Anyway, Ive got some stuff to be doing so I wont be checking out this thread anymore.
If any developers feel they want to take up any of these, please feel free ^_^
zinconnu said:
Maybe a new app to replace and improve SmileySMS ( development is stopped, and on windows mobile we can't have smileys in sms without this buggy app).
Click to expand...
Click to collapse
I was going to make this same suggestion. I hope somebody with the skills stumbles upon this and can continue the development for this.
cris_rowlands said:
well folks, youve given me plenty of ideas.
A few of them ill try to work on, sadly many of your ideas are a little beyond me
Anyway, Ive got some stuff to be doing so I wont be checking out this thread anymore.
If any developers feel they want to take up any of these, please feel free ^_^
Click to expand...
Click to collapse
Hi Cris,
if you can consider my suggestion to develop a "shopping List" + "Inventory" apps I think is not that difficult to develop. It almost similar to like any shopping list app & you be able to keep track of the inventory list maybe with photo or pic is good enough.
pls do consider this apps, as both iPhone & WinMo still do not have such app yet. If you do build up, you will be the 1st to come out with.
Lockscreen Slider
Please try to do a Lockscreen Slider for WM 6.5
http://forum.xda-developers.com/showthread.php?t=638230
Thanks
salo1 said:
Please try to do a Lockscreen Slider for WM 6.5
http://forum.xda-developers.com/showthread.php?t=638230
Thanks
Click to expand...
Click to collapse
yes let's steal some more apple patents!!! The idea is great! Few months ago I already asked this topic in the S2U thread but no response, probably my request got overseen or the guy is just too busy with other stuff.
Hi everyone
i've had nothing but good things happen so far with the threads on doing custom ringtones, but on the same token, i was wondering if it was possible to do the same thing to the alarms and alerts,
say what you will about the factory alarm tones, nothing is more effective in the morning than Time by Pink Floyd
wanderfaner said:
Hi everyone
i've had nothing but good things happen so far with the threads on doing custom ringtones, but on the same token, i was wondering if it was possible to do the same thing to the alarms and alerts,
say what you will about the factory alarm tones, nothing is more effective in the morning than Time by Pink Floyd
Click to expand...
Click to collapse
I've figured it out. I'll do a write up later...
eternalemb said:
I've figured it out. I'll do a write up later...
Click to expand...
Click to collapse
already, that's fantastic, a big thanks on behalf of everyone!
Items required:
Unlocked (with ChevronWP7 or Developer unlocked) WP7 device
ChevronWP7 Ringtone Installer
MS Expression Encoder or other audio conversion software
XAP Installer (Tom XAP or WP7 SDK Application Deployment)
TouchXplorer: http://forum.touchxperience.com/download/file.php?id=44&sid=5129675be033d863b931bdc3bee51b36
1. Choose files to use as alert/alarm sounds. If in WMA format already skip to step 3.
2. Using MS Expression or equivalent, convert files to WMA.
3. Rename desired alert tones to Alert-01.WMA (you can subsitute the number based on what sound you'd like to replace, because we will be overwriting the corresponding sound) or for alarms it'd be Alarm-01.WMA (or corresponding). NOTE: You will be overwriting the sounds so make sure you review all sounds and make sure you don't mind not having them anymore if you're overwriting them.
4. Using ChevronWP7 Ringtone Installer deploy these files to your device through an XAP Installer.
5. Install TouchXplorer by deploying XAP to device.
6. Using TouchXplorer navigate to My Documents>My Ringtones and highlight desired alert/alarm sound. Bring up the menu and copy it. Navigate back to root menu and go into Windows. Paste alert/alarm sound; it will ask if you wish to overwrite, click yes. Done. Repeat for all other alert or alarm sounds.
NOTE : I believe this will only work on HTC phones ATM, since TouchXplorer only works on HTC devices for now.
Why cant I just use the windows deployment tool (on focus) , renaming the files , I tried installing an alert using the chevron and it sent it to the ringtone folder , I made the alert, Alert-11 since they were all in sequence, but I'll try just renaming the files , if I have to use Toms Ill try that, but I cant use the touchexpress (and theres no equivelent that i know of for samsung,yet)
It does allow me to install touchexpress , but all I is the "My Device" search , not sure if it works or needs certain parameters to use to find anything, also I dont know the file structure in this phone anyway, it does have all menu items but grayed out, so it might get an update later on and work
I guess Microsoft doesnt want this on the device !
" TouchXplorer has been Revoked by Microsoft , you'll have to re-install it, but it just stays on for a minute before getting revoked again!
Download the alarm clock w/ weather app...lets you assign any song you have in Zune as an alarm tone (touchxplorer only works with htc devices)...plus it acts as a nice bedside clock with weather information
it might be worth getting the app just to see how they import the songs!
Vintage144 said:
I guess Microsoft doesnt want this on the device !
" TouchXplorer has been Revoked by Microsoft , you'll have to re-install it, but it just stays on for a minute before getting revoked again!
Click to expand...
Click to collapse
Your device re-locked itself, nothing was revoked.
This is great!!!
Hack my ringtones is succesfull, tomorrow i will try to rewrite some alert tones.
@eternalemb - thanks for the tip! i successfully added my rooster alarm and much louder txt msg and email tones!
I did it too
R2D2 as my text tone
Thanks for your time and good work!!!
Anyone figure out how to do it without an HTC Device. I have the DVP and the alarms that come with the device are no way near loud enough to wake me up. My old alarm was set to Chop Suey by System of a Down! WAKE UP!!!! I have a developer account as well if that will help.
Kloc said:
Anyone figure out how to do it without an HTC Device. I have the DVP and the alarms that come with the device are no way near loud enough to wake me up. My old alarm was set to Chop Suey by System of a Down! WAKE UP!!!! I have a developer account as well if that will help.
Click to expand...
Click to collapse
Unlike for ringtones, there's no function for adding them in the OS (ringtones use Microsoft.Phone.Media.Extended I think) other than using file manipulation, or registry tweaks, both of which can only be done on HTC devices at the moment.
This is great!!! Worked a treat for the alerts. Just need to do the alarms now.
Just one question..... There seems to be a limit on the number of alerts. Has anyone else come across this? Originally there are 10 alerts so I created an 11th but this doesn't seem to get picked up at all.
chubnut said:
This is great!!! Worked a treat for the alerts. Just need to do the alarms now.
Just one question..... There seems to be a limit on the number of alerts. Has anyone else come across this? Originally there are 10 alerts so I created an 11th but this doesn't seem to get picked up at all.
Click to expand...
Click to collapse
Any ideas on this guys?
chubnut said:
This is great!!! Worked a treat for the alerts. Just need to do the alarms now.
Just one question..... There seems to be a limit on the number of alerts. Has anyone else come across this? Originally there are 10 alerts so I created an 11th but this doesn't seem to get picked up at all.
Click to expand...
Click to collapse
The alerts are listed in the registry by name, you're replacing one of the built in ones, so no changes are needed there, adding an extra alert will only work if you can edit the registry.
l3v5y said:
The alerts are listed in the registry by name, you're replacing one of the built in ones, so no changes are needed there, adding an extra alert will only work if you can edit the registry.
Click to expand...
Click to collapse
Thanks for that. Explains a fair few things.
i did all.but my phone did not give any sound..
i want to ask a question: is the bit rate important ?
for example i use 16 bit rate
must it be higher or ???
thanks..