Related
GReetings,
So I have searched for a lot of forums to see if there is an answer to this.
So the story goes. I got myself a new phone and put the TP2 in a drawer. After moving, I have a reason to pull it out and get it ready to be used again. However, it wont turn on.
So I figure the battery went dead. I plug it into the charger, the LED lights up, and got to wait a few minutes. After a minute or so, the white HTC screen suddenly comes on the screen, it vibrates one quick, and shuts off again.
I cant power it up, I can get it to boot loader. Really not sure what the problem is here.
Any ideas suggestions would be welcome as I want to put this one back to stock so I can send it to my step-kid for use.
Try charging it for a few hours, while it is closed. If the phone regularly reboots and then switches off, leave it that way.
The idea is to charge the battery enough, so as the phone boots.
had the same prob the other day
what helped here was:
remove the battery and let it out of the phone for a couple of hours (i did it at night). had the battery removed for about 8 hours. put it back in and it worked for me again.
give it a try and let me know!
Ok will try that tonight when I'm heading for bed. Ill leave it to charge while I'm at work because I get tired of hbearing it vibrate every 20 seconds while its charging
kilmarac said:
Ok will try that tonight when I'm heading for bed. Ill leave it to charge while I'm at work because I get tired of hbearing it vibrate every 20 seconds while its charging
Click to expand...
Click to collapse
Did you get it to work? I'm having the same problem. I posted in another thread that had the same problem as you.
Maybe HTC really is pushing an auto kill program.
Sent from my PG86100 using Tapatalk
Unfortunately, it didnt work. I think the phone was probably dropped one too many times and is broken. I cant get it to boot, cant even get into the bootloader. So I have no idea.
Steefje said:
had the same prob the other day
what helped here was:
remove the battery and let it out of the phone for a couple of hours (i did it at night). had the battery removed for about 8 hours. put it back in and it worked for me again.
give it a try and let me know!
Click to expand...
Click to collapse
I also had the same problem I took out the battery and blew on it to get it to cool down and had it sit out of the phone for 10-15mins then put it in the phone and plugged into charger and left it for 30mins then hit the power button.
This reboot cycle happens when my phone dies in android and it works every time for me.
Hope that helps
for future reference, the phone died with a Sim card in it, revived when a Sim card was replaced.
Sent from my cm_tenderloin using Tapatalk
yesterday I had the same problem, boot loader doesn't work. But.... I charged my battery, replaced it, pushed Vol. down + EndCall btn. + Power btn and inserted battery. As a result my boot loader is working now. But after running task 29 and flashing custom firmware my phone doesn't came back alive. I'm looking for solution now. Did anybody have the same problem?
When I'm flashing original firmware the process stops on checking my phone.
Please, give me advice how to solve my problem. Thx.
RHOD*** 32M SS-BC
SPL-0.88.000
MircoP(LED) Wrong Plat(0x0)
MicroP(KEY) Wrong Plat(0x0)
Turbo HW/Turbo SW
TP MFG DATA
501,526 793,854
810,209 211,200
211,855 Calibrated
First off it looks like you are not Hard SPLed so custom ROMs will be a problem for you. Second you have a major error with your keyboard and touch screen. I have a TP2 that took a dip into some water that has the same error - MircoP(LED) Wrong Plat(0x0) and MicroP(KEY) Wrong Plat(0x0). When I first got the phone it would not turn on but would make a noise that sounded like it was crying. I got another TP2 that works fine and swapped the top halfs of the phones because the new one looked like a dog chewed on it. It still worked but in real bad shape. The touch screen that got wet works fine so it is on the TP2 that I use all the time. The wet TP2 will now start up but the keyboard, all of the front buttons but the end key, and touch screen don't work. The touch screen will only register getting touch in one spot. So if you have a software keyboard up only the t will be hit. I Hard SPLed it, ran task 29, and installed a custom rom on it. I have to use My Mobiler to do anything with it. It also will take a battery that has a full charge and drain it to about 50% in about 20 minutes and then claim the battery is dead even on a charger. Something to play with.
With the error you have unless you got it wet you might have a bad flex cable. I would try to fix the error first before trying to change roms.
Thank you for answer.
My phone was HardSPLed and flashed by custom firmware and works fine for half a year. The reason for my situation was broken charger... I think that problem in hardware when I put it on charge, my phone lightly flashed by orange lamp and became can't turn on
You are told that it is looks like it doesn't hacked because I tried to roll it back to original.
Are you sure the phone did not get wet? Everything you describe makes it sound like the phone took a dip. If not, try plugging it into a computer and see if it will charge and turn on.
I resolved my problem krekol, you are right at 100%!!! I took my phone from work-shop and they told me that some water get there, or it was just condensate. As a result oxidation around microphone and some connections.
Now, my phone works fine on WM 6.1 (they flashed it) and somewhy I can't flash Jackos S3 JackFULL 1.7.0. and Rhodium-HardSPL_V2_00R3 too
maybe it is effects of oxidation.... I'm trying flash from my flash-card.
AlexeYM007 said:
I resolved my problem krekol, you are right at 100%!!! I took my phone from work-shop and they told me that some water get there, or it was just condensate. As a result oxidation around microphone and some connections.
Now, my phone works fine on WM 6.1 (they flashed it) and somewhy I can't flash Jackos S3 JackFULL 1.7.0. and Rhodium-HardSPL_V2_00R3 too
maybe it is effects of oxidation.... I'm trying flash from my flash-card.
Click to expand...
Click to collapse
You can only HSPL once. If they (or you) relocked the device, you won't be able to unlock it again unless you can get Olipro/cmonex to take pity on you.
Glad I could help. Here is a small warning. Once a phone gets wet it's days are numbered. You might have a week, a month, or a year but the phone will die. I would plan ahead for the phone to die and keep an real close eye on it.
Sent from my HTC Touch Pro 2 running FRX07.1 using the XDA mobile application powered by Tapatalk
AlexeYM007 said:
I resolved my problem krekol, you are right at 100%!!! I took my phone from work-shop and they told me that some water get there, or it was just condensate. As a result oxidation around microphone and some connections.
Now, my phone works fine on WM 6.1 (they flashed it) and somewhy I can't flash Jackos S3 JackFULL 1.7.0. and Rhodium-HardSPL_V2_00R3 too
maybe it is effects of oxidation.... I'm trying flash from my flash-card.
Click to expand...
Click to collapse
If you need to HardSPL a second time, PM me.
My phone has been acting weird lately. Just want to see what the consensus is. phone battery drains ok until I turn on A gps program will be about 90% battery gps will be on for about 5 minutes the phone shuts off restart and battery reads 40%. Then the phone keeps dying. Any thoughts im assuming its the battery but you all might know something i dont.
P.s. The phone is stock rom tilt 2
Thanks
That sounds like battery to me, but that doesn't mean there isn't also an issue with the phone...
If any of your buddies has an EVO or another TP2 (I can't remember what other batteries would work right now...) that you could try in your phone to rule that out?
If not, batteries aren't that expensive. I wouldn't go for the absolute cheapest on ebay either, find something that's got a brand name...
Thank you, a quick add on as to why it may not be the battery. I could'nt type it all out earlier because I was on my gfs phone.
I was away from a charger so just left it off for about 4 hours. Started it out of habit now its showing 80% after no charging. I also didn't mention Ive done a hard reset on it still get the same issue, everything is fine wi-fi for extended periods talking texting but as soon as I use gps it shuts down in about 3 minutes.
This is also a new issue and I have not recently added anything to my phone.
Edit: Update again tried to make a call and it died.. Ill take the suggestions and get a new batt.
MDavisiw said:
Thank you, a quick add on as to why it may not be the battery. I could'nt type it all out earlier because I was on my gfs phone.
I was away from a charger so just left it off for about 4 hours. Started it out of habit now its showing 80% after no charging. I also didn't mention Ive done a hard reset on it still get the same issue, everything is fine wi-fi for extended periods talking texting but as soon as I use gps it shuts down in about 3 minutes.
This is also a new issue and I have not recently added anything to my phone.
Edit: Update again tried to make a call and it died.. Ill take the suggestions and get a new batt.
Click to expand...
Click to collapse
You could also try a hard reset, flash a different ROM, etc.
Thanks for keeping on the thread, Tried the hard reset, the rom is what came with the phone never done a different one
New Battery is on the way. Something is screwy with it but we shall see.. If its not the battery I suppose Ill need to start looking for a replacement or an upgrade. Thank you for your input on the subject.
My defy is barely 2 months old, i am running CM7.1 since it was released and its quite smooth with no problems till now.
But recently i went to a remote place (i made another post somewhere) and switched SIM cards, i switched back SIM again now. Since then, my defy randomly dies sometimes while holding it and most times while in my pocket. My battery percent looks fine (i wiped it just in case).
This happened to me several times, i suspected the battery was loose, so at the beginning i reinserted my battery 2-3 times and it would start again. But now even after reinserting the battery it refuses to turn on, i usually need to connect it to a charger (or USB) and after the LED light turns on, i can switch it back on, disconnect it and use it again.. until it dies again randomly.
I tried inserting a piece of paper as padding to prevent the battery from moving, but didnt help much. When i shake it a bit, it dies too, so it might be a loose battery or some hardware problem, but the reason im baffled is why i cant turn it on again without connecting it to a charger, and also why it dies randomly when i leave it alone and didnt even touch it. Also, i never dropped it even once or mishandle it at all to make the battery be loose, when i insert tha battery, it still snaps/click into place just like when it was new.
ANy help suggestions will be appreciated. Sorry for the long post, just wanted to provide a detailed account.
I found an almost similar problem but no answer here http://forum.xda-developers.com/showthread.php?t=1109429
Firstly, check if your setVsel settings is all ok and not too low down specially the voltages settings. If you're not using SetVsel, then check your 2nd-ini in system - overclock settings, see if it enable and check those individual settings which might be too low that caused the phone under power/voltage and triggered self shut down.
Another option to narrow down your issue is trying another battery. Buy or borrow from a friend. If the case of random shut down still occur, then it might be hardware issue in your Defy mainboard. BUT.. I would flash it to another rom to make 100% sure before sending it back to the shop.
Thanks a lot for the reply, im not sure if its an overclock or vsel issue because it even dies sometime while booting up if i move it around, so im guessing battery or mainboard issue?? Ill have to check with another battery first then... hoping its not a mainboard issue coz the nearest service centre is miles away from where i live
So I'm watching tv, and I plug in my phone to charge it a bit because the GPS had gotten stuck on this morning and I burned my battery down to 40%. All of a sudden I hear it buzzing over and over again...like a reboot loop.
So I pull it out of the charger, pull the battery and let it try to boot. Gives the samsung screen for a moment, then flickers, and again to the reboot loop. Holding down power for 10 sec makes it do the same thing, I can't force it into recovery or DL mode without it bootlooping either! At one point I was able to get to the download mode screen, but just 3 seconds and the screen goes black, and back to bootlooping.
I literally did nothing to it. Only thing I did different today was the GPS got stuck (which it has done before), I rebooted the phone, then when it booted again I went ahead and just shut off the GPS. But this was like 20 minutes before this started happening.
So what can I do? Right now its plugged into my computer charging while off, seems to be the only thing it can do without bootlooping.
Running CM9.1 Nightly 9/3 with included kernel and LC8 radio (I think)
zander21510 said:
So I'm watching tv, and I plug in my phone to charge it a bit because the GPS had gotten stuck on this morning and I burned my battery down to 40%. All of a sudden I hear it buzzing over and over again...like a reboot loop.
So I pull it out of the charger, pull the battery and let it try to boot. Gives the samsung screen for a moment, then flickers, and again to the reboot loop. Holding down power for 10 sec makes it do the same thing, I can't force it into recovery or DL mode without it bootlooping either! At one point I was able to get to the download mode screen, but just 3 seconds and the screen goes black, and back to bootlooping.
I literally did nothing to it. Only thing I did different today was the GPS got stuck (which it has done before), I rebooted the phone, then when it booted again I went ahead and just shut off the GPS. But this was like 20 minutes before this started happening.
So what can I do? Right now its plugged into my computer charging while off, seems to be the only thing it can do without bootlooping.
Running CM9.1 Nightly 9/3 with included kernel and LC8 radio (I think)
Click to expand...
Click to collapse
My first guess is your battery is shot. i was gonna recommend the power button failure but if its staying off it might not be that. but id let it charge fully then try to boot up.
Thanks, oddly after a bit of messing around finally got it to boot up. Immediately backed up in CWM....seems to be acting OK now. Idk what happened...
i'll guess, the USB connector got short-circuited when you plugged in, and it caused a cascade failure that fried the SD card or something else inside the phone
there was a factory defect back then with the old SGS 1 (i9000m) model, they fixed that after the 3rd batch, everyone with an old phone from 1st and 2nd release batches, were able to exchange i for a new one.
however in your case, that's not a factory defect, but you plugged it wrong (my guess)
because it has happened to me before when i plugged it in, but the battery was still not charging even after several minutes, yet the phone was getting really really hot
then i unplug, and plug it back in and got the sound feedback "tuu tuud" and then it was actually charging after a few minutes
the first time around even though the charging icon changed, there was no feed back sound, and that was the key, it was not plugged in properly.
so after that time, i always made sure to verify to make sure the phone was plugged in properly and not just relay on he visual icon.
check back after a few minutes, to make sure the phone doesn't get very hot, and it actually increased 1%
It happened again today! After a full charge overnight and no problems for the day up to a little while ago, I opened my email app, it froze, then proceeded to start boot looping. I'm in class so I don't have my computer to try to bring it out of it...so yeah that sucks...
I do remember when I got it to charge yesterday it showed it was charging for 20-30 minutes, but after I "revived" it, I found it hadn't charged at all.
I have been using a Nokia USB cable to charge my phone since I got it, because it was longer than the cheapie Samsung cable that came with it...but it hasn't ever caused problems before. And it charged just fine last night.
How long is the warranty on these things thru tmobile? I may just swap it out while I still can.
Also on an unrelated note, I upgraded to the LG3 radio because I was meaning to anyways...
I pulled it out of it again! This time I held the power button while putting the battery in, when it vibrated I let go, it vibrated again, showed the Samsung logo, and then booted like normal
May I ask what rom are you currently on?
datrapstar said:
May I ask what rom are you currently on?
Click to expand...
Click to collapse
CM9.1 nightly 9/3 with included kernel
It did it a third time during class while it was in my pocket, the power button trick didn't work this time, I had to pull the battery after the samsung logo, plugging it back in to get it to boot...but...
near the end of the CM9 boot animation, when it vibrates and the auto brightness kicks in, it started it again! I have yet to revive it...
This is a bit upsetting because I had just got CM9 the way I liked it and I don't exactly have the time right now to mess with warranty and a new phone...I would like to fix it.
There are about 20 different threads on here on how to revert to stock...let me as a last ditch try to revert to stock and see if it keeps doing it...unless somebody has any ideas...
I was working in recovery mode, i super-wiped my phone to see if installing a ROM from scratch would help, and my phone even does it in recovery mode. Warranty time.
So whats the fastest way to restore to stock? Who knows how long I will have after reviving it before it breaks again.
zander21510 said:
I was working in recovery mode, i super-wiped my phone to see if installing a ROM from scratch would help, and my phone even does it in recovery mode. Warranty time.
So whats the fastest way to restore to stock? Who knows how long I will have after reviving it before it breaks again.
Click to expand...
Click to collapse
Here you go!!
http://forum.xda-developers.com/showthread.php?p=30832325
Sent from JMT Goodness
Well, finished playing stupid for T-Mobile, in two weeks I will have my replacement T989. Now all that's left is returning this thing to stock before it starts acting up again.
And my temporary replacement phone?
HTC Dream, aka the G1, the first Android phone! Lol what a difference...GB feels like a dinosaur...
http://forum.xda-developers.com/showthread.php?t=1513359
[HOWTO]Restore to Stock/Recover from a Bad Flash. Could try the last 3 pages on this thread. That will help you go back to stock without an issue. Hell might make you wanna keep your phone if you can get it to work again.. good luck
Sent from my SGH-T989 using xda app-developers app
datrapstar said:
http://forum.xda-developers.com/showthread.php?t=1513359
[HOWTO]Restore to Stock/Recover from a Bad Flash. Could try the last 3 pages on this thread. That will help you go back to stock without an issue. Hell might make you wanna keep your phone if you can get it to work again.. good luck
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Thanks! got it all done, back to ugly, ugly stock lol...and just when I thought maybe I would have to brick it myself it did the reboot thing again...so pulled the battery and there it sits factory reset.
Hello guys
i got a little problem here
since a few days ago, my phone is always reboot on its own
at first i thought its a ROM problem, so i reinstall it yesterday
but it still happening, even right now.
just a few minutes ago i realized whats wrong. sometimes i like to "drop" my phone, not like from 1 meter height, its just when i want to put it on the table, i dropped it maybe from 2-3 cm height. just did this a few minutes ago and my phone reboot on its own.
i tried it a few times and sometimes the phone isnt rebooting, it went off, and i need to turn it on again.
i pick up my phone and i hit the back of it with little power, and yes it restarted again.
my question is, is this a hardware problem, or just a battery problem?
i dont have any spare battery, but if anyone suggesting it i will buy a new one.
i know xperia arc is an old phone but i hope it wont come to a hardware problem
any suggestion/replies will be very appreciated
thanks guys
coldmalice said:
Hello guys
i got a little problem here
since a few days ago, my phone is always reboot on its own
at first i thought its a ROM problem, so i reinstall it yesterday
but it still happening, even right now.
just a few minutes ago i realized whats wrong. sometimes i like to "drop" my phone, not like from 1 meter height, its just when i want to put it on the table, i dropped it maybe from 2-3 cm height. just did this a few minutes ago and my phone reboot on its own.
i tried it a few times and sometimes the phone isnt rebooting, it went off, and i need to turn it on again.
i pick up my phone and i hit the back of it with little power, and yes it restarted again.
my question is, is this a hardware problem, or just a battery problem?
i dont have any spare battery, but if anyone suggesting it i will buy a new one.
i know xperia arc is an old phone but i hope it wont come to a hardware problem
any suggestion/replies will be very appreciated
thanks guys
Click to expand...
Click to collapse
Your phone's battery may be loose.
僕のLT18iから送られてきた
popthosegaskets said:
Your phone's battery may be loose.
僕のLT18iから送られてきた
Click to expand...
Click to collapse
really?
so it isnt something inside the phone?
coldmalice said:
really?
so it isnt something inside the phone?
Click to expand...
Click to collapse
Yeah, it's possible because you keep saying that the phone turns off when you drop it, indicating that the battery may have came loose and caused the phone to turn off. You can solve it by stuffing some paper under the battery so it is much closer to the contacts.