I'm having problems with the so called "sleep of death".
I make all my profiles and leave the defaults for conservative. Minimum is set to 200mhz and max for screen off is 600.
It seems like no matter what I set the clocks to my phone never wakes up from sleep. I have to pull the battery to turn it back on.
Running SFR1.1.1.
Sent from my Epic 4G via Tapatalk
Edit
Is it the screen off profile?
If you're using the included kernel for SRF 1.1.1 don't use a screen off profile, set it to conservative, and minimum cpu at 200mhz. It should be fine with those settings.
Its on the first page of the SRF thread.
Sent from my SPH-D700 using XDA App
Switch to paid version of Voltage Control. It's optimized for us now.
Having issues with setcpu freezing up my phone even with no profiles.
If voltage control is optimized for epics I may buy it. Underclocking really boosts battery life.
Sent from my Epic 4G via Tapatalk
Ron_91 said:
Having issues with setcpu freezing up my phone even with no profiles.
If voltage control is optimized for epics I may buy it. Underclocking really boosts battery life.
Sent from my Epic 4G via Tapatalk
Click to expand...
Click to collapse
Are you set to conservative?
Sent from my armed and operational battle station.
All profiles were set to conservative, yes.
Sent from my Epic 4G via Tapatalk
Ron_91 said:
All profiles were set to conservative, yes.
Sent from my Epic 4G via Tapatalk
Click to expand...
Click to collapse
What was your lowest freq set to? Some phones don't like 200 at all
Sent from my armed and operational battle station.
Wasn't Conservative deemed buggy for the Epic? And ondemand was the better option?
The new twilight kernel, which is included in SRF 1.1.1 is fine with conservative.
There is a free version of voltage control too. Uninstall set cpu and try that first and see how that works for you... if that doesn't help, maybe you should flash a different kernel.
Sent from my SPH-D700 using XDA App
Sprintguy1376 said:
The new twilight kernel, which is included in SRF 1.1.1 is fine with conservative.
There is a free version of voltage control too. Uninstall set cpu and try that first and see how that works for you... if that doesn't help, maybe you should flash a different kernel.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Yup. I believe this is posted a few times on the ACS thread. Go with Genocide or Vision. Now on demand will drop below 200 even if its set at your minimum but may very well still work.
Sent from my SPH-D700 using XDA Premium App
Someone correct me if I am wrong, but I thbought there were also problems by using profiles at all.
Have you tried getting rid of the profiles? (After backing them up, of course)
Sent from my SPH-D700 using XDA Premium App
I use the Vision kernel with SetCPU to ondemand with NO issues at all I had profiles enabled at one point but it seemed redundant because I had it set to ondemand. If you have it set to anything other than ondemand then I can see using profiles.
Related
Now I am not blaming the app I am just wondering... everynow and then, when I wake my phone up, it doesn't want to wake up or when I turn it on and try to unlock it freezes... was wondering if anyone else was getting the same thing.
Rooted using the one-click method.
Screen off setting is min 400 max 400.
Sent from my SPH-D700 using XDA App
SetCPU issues
I have been having the same issues myself. Mine was set low to 100min/max: screen off just as a test today and it did that to me a on a few seperate occasions. Not sure why, just ended up battery pulling after 10-15 seconds of no response from the phone.
The cpu is set too low on screen off, go for 245 or so
setcpu does not play nice with r phones. i had problems witth it on every kernal i played with. right now im using the mix up kernal. i used setcpu to 1.2ghz max and 100mhz min. conservative governore. i have yet to find a set up to use while the screen is locked with no issues. what i do know is galaxy s phones only like the conservative setting. maybe a 400mhz max 100mhz min with conservastive governore would work?
Make sure setcpu is set to conservative. I set my lowest to 200mhz and max at 1200. No issues here other than sometimes the notification pull down bar is laggy but it does that stock anyway.
Sent from my SPH-D700 using Tapatalk
I'll try out those settings tomorrow. Thanks guys =)
Any1 know how to get to 1.4 ghz? my max is 1.2 on setCPU and i have voodoo kernel flashed
Try this to hit 1.4.
http://forum.androidcentral.com/epic-4g-roms-hacks/36554-emergency-rom-alert-baked-snack-1-0-a.html
zetterwing said:
Try this to hit 1.4.
http://forum.androidcentral.com/epic-4g-roms-hacks/36554-emergency-rom-alert-baked-snack-1-0-a.html
Click to expand...
Click to collapse
thanx dude i really appreciate it but still only 1.2 for sum reason
II5StarII Swag said:
thanx dude i really appreciate it but still only 1.2 for sum reason
Click to expand...
Click to collapse
There's a kernal that allows you to hit 1.4ghz its the overclocked one from baked snacks
Sent from my SPH-D700 using XDA App
mysteryemotionz said:
There's a kernal that allows you to hit 1.4ghz its the overclocked one from baked snacks
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
thats the rom i switched from dude both only allowed up to 1.2ghz thanxs for replying
II5StarII Swag said:
thats the rom i switched from dude both only allowed up to 1.2ghz thanxs for replying
Click to expand...
Click to collapse
The rom don't control the cpu speeds. The kernal does. You cab run any rom kernal combo you would like. In order to hit the 1.4ghz you want you need to run a kernal that is capable of doing so
Sent from my SPH-D700 using XDA App
Is SetCPU really necessary anymore? If you run a kernel that's not locked into performance mode it will scale on it's own even without SetCPU. I haven't installed it on my Epic yet and when monitoring the phone with SystemPanel I see my CPU go down to 200mhz when idle and scale up when processes are running.
Where is the kernel for 1.4? I have baked snack rom max is 1.2 i know kernel is the part that "controlls" speed but I'm stuck. Any help
Sent from my SPH-D700 using XDA App
specialk0324 said:
Where is the kernel for 1.4? I have baked snack rom max is 1.2 i know kernel is the part that "controlls" speed but I'm stuck. Any help
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Last I knew it was on the baked snacks website
Sent from my SPH-D700 using XDA App
Is it ok to use setcpu with a rom like myns warm two point two or is it not necessary?
Sent from my PC36100 using XDA Premium App
Certainly OK, but useful... you'll get a lot of answers. I'll say it can be
Sent from my PC36100 using XDA App
If your happy with the way your phone is running then why mess with it? Setcpu will work with it no problems but if you want to overclock then you will need to change kernels
Sent from my Evo while i should be working
Yeah I wasn't planning on issuing for overclocking, but for underclocking when the screen is off.
Sent from my evo using XDA Premium App
huludical said:
Yeah I wasn't planning on issuing for overclocking, but for underclocking when the screen is off.
Sent from my evo using XDA Premium App
Click to expand...
Click to collapse
SetCPU is useful regardless of ROM or Kernel. The ability to select different profiles and CPU settings based on need or battery life is always nice. I would set my default to "On Demand" and max 998 min 128. Then enable profiles and set it up how you like. I perfer to drop my cpu way down while charging, wayyy down for screen off, and hero style 528 for 50% or less battery.
If you do opt for a different kernel make sure it is one that is listed in Myn's post, otherwise it will bork your Spare Parts app.
ducats said:
SetCPU is useful regardless of ROM or Kernel. The ability to select different profiles and CPU settings based on need or battery life is always nice. I would set my default to "On Demand" and max 998 min 128. Then enable profiles and set it up how you like. I perfer to drop my cpu way down while charging, wayyy down for screen off, and hero style 528 for 50% or less battery.
If you do opt for a different kernel make sure it is one that is listed in Myn's post, otherwise it will bork your Spare Parts app.
Click to expand...
Click to collapse
Ok thanks for the info! I'll play with it and see if I get better battery.
Sent from my evo using XDA Premium App
I'm running back into the problem of custom Roms freezing on me, no FC's, just the phone freezing and requiring a battery pull to re-boot. I odin EC05 plus, let it boot and sit for a few minutes, reboot, let it convert, flash cwm purple, wipe, then flash whatever rom, and eventualy they all freeze.
The only roms to never give me that problem is CM7, MIUI and true stock.
Tried everything, except for not using the stock cable, but even still, cm7 and miui have no problem.
Sent from my SPH-D700 using XDA App
I've had the same problem with SRF 1.2...and I linked the problem to certain SetCPU settings like on demand and userspace and to undervolting to much in the higher OC'd frequency ranges...even though I've experimented wih these settings and found a somewhat stable medium...I still get the random freezes once in a blue...I don't know what else it could be.
Sent from my rooted, suited, & booted Epic 4G kno dat!
Right now I'm on SRF with the 1.1.1 Kernel, using setCPU 200-1000, cfq, and no undervolting at all. I was on the 1.1.0 Kernel using voltage control when I had it freeze. I've uninstalled voltage control and galaxy tuner. Oddly enough setcpu dosent fc when I go into the voltages, which it did a few flashes back.
Sent from my SPH-D700 using XDA App
What problems do you think Galaxy tuner was giving you...I'm using it right now?
Sent from my rooted, suited, & booted Epic 4G kno dat!
I wasn't sure, but I figured with using setcpu it would be best to uninstall it so there wasn't any sort of conflicts between the two.
Sent from my SPH-D700 using XDA App
I'm not sure I follow where the conflict btwn those 2 apps would be...once controls cpu speed, governing, and voltage...and the other controls screen brightness and sound attributes...not trynna be a smart ass I'm just trynna make the connection?
Sent from my rooted, suited, & booted Epic 4G kno dat!
In galaxy tuner there is some options for overclocking, as well as IO scheduling.
Sent from my SPH-D700 using XDA App
At any rate. Ill sell you my phone fully uv and tweaked for max battery and speed
Sent from my SPH-D700 using XDA Premium App
You didn't read my OP, I have no problems at all with FC's, my problem is the phone freezes and I have to pull the battery to restart.
Custodian said:
At any rate. Sounds like your phone is garbage. Make sure you enable journaling to help mend the fc's.
Sent from my SPH-D700 using XDA Premium App
Click to expand...
Click to collapse
Sent from my SPH-D700 using XDA App
Skimp Killah said:
You didn't read my OP, I have no problems at all with FC's, my problem is the phone freezes and I have to pull the battery to restart.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
If you aren't undervolting and are having this issue on multiple ROMs, it sounds like a conflict between some apps like you suspected. That or something is not right with your phone. Freezes happen to me when undervolting too much but you aren't doing that....edit...maybe your phone just doesn't like the 200 minimum that well. If I remember right, stock values are 1000 max and 400 min.
Sent from my SPH-D700 using XDA Premium App
I'm wondering if maybe the 200mhz is whats doing it then, I always figured 200-1000 was stock, and the phone would only freeze when the screen was off. Right now I'm using setCPU with it set at 200-1000 with cfq IO scheduling. If I have more freezes I will try bumping up to 400-1000.
JohnCorleone said:
If you aren't undervolting and are having this issue on multiple ROMs, it sounds like a conflict between some apps like you suspected. That or something is not right with your phone. Freezes happen to me when undervolting too much but you aren't doing that....edit...maybe your phone just doesn't like the 200 minimum that well. If I remember right, stock values are 1000 max and 400 min.
Sent from my SPH-D700 using XDA Premium App
Click to expand...
Click to collapse
im currently undervolted with the aosp rom from dub with genocide's final kernel...200mhz is perfectly fine...if 200 is underclocked too low or other frequencies are too low...sod or freezes will happen with the frequency with the wrong voltage is reached..i have setcpu and voltage control together but mainly use the new setcpu...when idling, i see a 1 percent draw in 2 hours and 6 minutes...and use stability test whenever you underclock to see if it safe to use...just my 2 cents...
I'm having trouble finding a CPU app that works perfectly with this phone. I've tried setcpu, CPU master, system tuner, and nstools. What's everyone using to oc this thing?
Sent from my SGH-T989 using xda premium
Depends on which rom your running but in general...you should use none. Most roms already uv and oc and if u use an app it'll butt heads.
Sent from my SGH-T989 using XDA
My issue is that it seems like my phone is skipping steps all over the place. I'm using cpuspy and the usage jumps between Max/min clocks. I'm kinda not digging that. Its the same with every rom i flash.
Sent from my SGH-T989 using xda premium
RushAOZ said:
My issue is that it seems like my phone is skipping steps all over the place. I'm using cpuspy and the usage jumps between Max/min clocks. I'm kinda not digging that. Its the same with every rom i flash.
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
That's not an issue with your cpu app. It has to do with your governor (the thing that controls how your CPU scales). Most ROMs come with ondemand by default which pretty much does exactly that, which is jump from min to max as needed. If you want something that scales more, you should look at conservative (for better battery life) or lagfree/interactive (for better performance). Lagfree/interactive are only available on select kernels though (whereas conservative is almost universally available). Streamline definitely has them and I think synergy does too.
Also CPU apps don't butt heads with the ROM/kernel default settings, it just overrides the default settings.
Yea I figured that but this is the first phone I've had where on demand performs that way. I've had a nexus s, epic 4g, evo, and a g2 and they all scaled across the steps ondemand. Ondemand on this phone works like the min/max governor. But your right conservative scales across the steps well. Just a bit choppier. About to install nstools and mess with the threshholds and whatnot.
Sent from my SGH-T989 using xda premium
What is the best app out there for tweaking cpu and stuff? Tegrak, extweaks, setcpu or what?
Sent from my SPH-D710 using xda premium
I've used antutu CPU master in the past but nowadays the ROMs I use have that function built in so there's no need for a 3rd party app. Anyway, I liked antutu bcuz u can tweak the scheduler as well as the CPU and governor.
Sent from my Nexus S 4G using xda app-developers app
Extweaks is pretty good. No-frills gets the basic job done.
Tappin' Typin'
Well. Depending on what ROM I'm running. I use the following
SetCPU
Voltage Control
Pimp my CPU
Tegrak Ultimate
ExTweaks
Out of all of them. ExTweaks has the most options but it is kernel specific. For just undervolting and adjusting the clock speed and governor and such I personally use SetCPU if the kernel supports undervolting and if it doesn't I use Tegrak Ultimate.
scarmon25 said:
Well. Depending on what ROM I'm running. I use the following
SetCPU
Voltage Control
Pimp my CPU
Tegrak Ultimate
ExTweaks
Out of all of them. ExTweaks has the most options but it is kernel specific. For just undervolting and adjusting the clock speed and governor and such I personally use SetCPU if the kernel supports undervolting and if it doesn't I use Tegrak Ultimate.
Click to expand...
Click to collapse
I can't get setcpu to work on stock. Causes my phone to reboot as soon as it goes to sleep. I overclock while in sleep mode but nothing crazy.
Sent from my SPH-D710 using Tapatalk 2
crawrj said:
What is the best app out there for tweaking cpu and stuff? Tegrak, extweaks, setcpu or what?
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Tegrak Ultimate gets my vote.
I've used tegrak, setcpu, and voltage control. I like the voltage control interface better.
Sent from my SPH-D710 using XDA
Tegrak!!!! Lol
Sent from my SPH-D710 using Tapatalk 2
I use no frills
Sent from my SPH-D710 using XDA