On my Kaiser I always set word correction to be T9 (pop up list of suggestions) rather than XT9.
I did the change using advanced config utility. The advanced config utility I have for the TP2 does not have this feature.
Who know how to adjust the registry to enable T9 instead of XT9?
Not sure if this is what you're looking for but here goes...
Go to "Settings" tab in TF3D
Tap "All Settings"
Go to "Personal" tab
Tap "Input"
With "Touch Input" selected, tap "Options..."
Go to "XT9 Settings" tab
Uncheck "Auto-Substitution"
ohyeahar said:
Not sure if this is what you're looking for but here goes...
Go to "Settings" tab in TF3D
Tap "All Settings"
Go to "Personal" tab
Tap "Input"
With "Touch Input" selected, tap "Options..."
Go to "XT9 Settings" tab
Uncheck "Auto-Substitution"
Click to expand...
Click to collapse
Thanks for the reply but that's not it.
In XT9 the default, word suggestions appear in a row across the screen.
In T9 the word suggestions appear in a pop up block on the screen.
samsat said:
On my Kaiser I always set word correction to be T9 (pop up list of suggestions) rather than XT9.
I did the change using advanced config utility. The advanced config utility I have for the TP2 does not have this feature.
Who know how to adjust the registry to enable T9 instead of XT9?
Click to expand...
Click to collapse
Has anyone figured out how to enable T9 instead of XT9 on the TP2?
I think the answer to your question is found in the thread:
http://pocketnow.com/tweaks-hacks/bring-classic-word-completion-back
I'm not very sure as I don't know what the T9 is supposed to look like...
Gr.
kurtfimmers said:
I think the answer to your question is found in the thread:
http://pocketnow.com/tweaks-hacks/bring-classic-word-completion-back
I'm not very sure as I don't know what the T9 is supposed to look like...
Gr.
Click to expand...
Click to collapse
Many thanks, that worked.
kurtfimmers said:
I think the answer to your question is found in the thread:
http://pocketnow.com/tweaks-hacks/bring-classic-word-completion-back
I'm not very sure as I don't know what the T9 is supposed to look like...
Gr.
Click to expand...
Click to collapse
T9 is a text predictive input method found mostly on mobile phones, where you use numeric keys to enter letters (hence the letters on each key) and the software predicts the word by the sequence in which you press the keys. This input method is present on my Dopod D810.
The word completion function being discussed is not a part of T9, but a Pocket PC/Windows Mobile feature that has always been present on PPC devices (way before these PDA convergence phones) but has been replaced by HTC to give a different behaviour and appearance.
I think I have the problem figured.
Once you do the reg tweaks T9 pop up word suggestion works great until you try and do a new contact.
When you move from a text field to a number field the keypad automatically changes to numeric and after that it will not change back again at all for any text field.
Some clever person out there needs to work out what other registry change needs to be made to re-enable the auto switching of the keyboard between text and numeric fields while still maintaining the T9 word suggestion.
I have an HTC Touch Pro2 from T-Mobile running WinMo 6.1. It seems that under Settings, Personal, Input, the "Word Completion" tab is missing between "Input Method" and "Options" that was there on my previous WinMo 5 device. Is this feature missing from WinMo 6.1 in general, or has it been disabled by T-Mo? if it's been disabled, is there a way to enable it?
yeah it's missing in my Tmo TP2 too. I do miss the auto correction feature that was on that tab.
edit : I did not reading the message right sorry
mloamiller said:
I have an HTC Touch Pro2 from T-Mobile running WinMo 6.1. It seems that under Settings, Personal, Input, the "Word Completion" tab is missing between "Input Method" and "Options" that was there on my previous WinMo 5 device. Is this feature missing from WinMo 6.1 in general, or has it been disabled by T-Mo? if it's been disabled, is there a way to enable it?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=4014852&postcount=6
tkalli said:
http://forum.xda-developers.com/showpost.php?p=4014852&postcount=6
Click to expand...
Click to collapse
now will that enable the tab to change the settings in the Input settings or just enable the options? I want the word completion, but not the word suggestion.
tkali is right- they are one and the same. Word completion and word correction are both linked to disabling T9
http://www.fuzemobility.com/autocorrect-and-autocompletion-solved/
Quick question about the reg edit. I havetriededitthe first valeu but it tells me access is denied. Is there something I am missing?
I made the registry edits mentioned in the other thread (copied below for reference) but I still don't have the missing Word Completion tab even after a soft reset.
From the other thread referenced above:
Diable eT9. Enable COMP IME. This is a registry edit.
Go to: HKLM\System\CurrentControlSet\Control\layouts\e001 0409
Edit: Ime File = \Windows\compime.dll
Layout Text = COMP IME
Go to: HKLM\Software\Tegic\eT9
Edit: XT9SupportMSSip= 0
That will bring you back to the good old word suggestion and dynamic auto completion.
yeah unfortunately it doesn't bring back the word completion tab, which i was hoping.
What exactly does it do then? I didn't notice any change.
it should enable it so that when you're typing, it'll give you 4 (changeable) suggested words as well as auto-correct some words. (type comming & it'll change to coming)
I like the auto-correct feature on the Tilt/MDA because you could type contractions without the apostrophe & the phone would auto-correct it for you. I hate the word suggestion & always had that turned off.
I don't know why they'd take this tab & feature out of the input settings/phone.
I'm still not getting any suggested words; I used to get them when using the Letter Recognizer (WinMo 5), but I don't get them with that or the QWERTY. I may have inadvertently set the # of words to suggest to 0; do you happen to know the registry setting for that?
I have a friend who has a WinMo 6.1 phone, but not from T-Mobile, and the Word Suggestion tab is visible. Seems there must be a setting for that somewhere that T-Mo disabled for some reason.
Maybe I'm misunderstanding your question, but I got Word Completion/Suggestion working just fine on my T-Mo Touch Pro 2 by pressing the XT9 button on the soft keyboard
Doesn't work while using the hardware keyboard though, which may be what you're asking about
yeah, we're talking about the function working with the hardware keyboard
Gotcha! Ignore me then
OK got the word completion to work but now I have no "space" instead I have ".com" there. Anyone have this problem?...Thanks
Does anyone have the factory settings?
I was actually referring to the on-screen input methods, not the slide-out keyboard. On my previous WinMo 5 device, the suggested words appeared regardless of which method I used - Letter Recognizer, QWERTY, etc. That's what was I looking for.
I also discovered what I did wrong - I had an "n" instead of an "m" in the name of the DLL. I corrected that, did a soft-reset and Viola! I have the suggested words now. It's hard to distinguish an "n" and "m" on that small screen.
The tab is still missing under Settings, Input - I would still like to have that visible if anyone figures out how to enable it.
Thanks for the help.
does anyone have the qwerty reg settings, now i no longer have that function all i have is regular keyboard or when qwerty is selected i have just numbers...thanks
Problem solved T-mo Word completion/no space bar
OK here is what I did on my T-mobile TP2 to get word completion working with the space bar (Mine (space bar) disappeared after I did the reg hack) I put these settings in and now I have word completion and the space bar back.
I went to
HKLM\System\CurrentControlSet\Control\layouts\e001 0409
Edit: Ime File = \Windows\compime.dll
Layout Text = eT9 IME
Go to: HKLM\Software\Tegic\eT9
Edit: XT9SupportMSSip= 0
Now on MY T-mo TP2 I have word Comp and a space bar also. Hope this helps someone...Tj
@TrekkerJmm does SYM on your hardware keyboard still work? (ALT + ,)
Hi all,
I am trying to build my first (Senseless) ROM. And for nof I got pretty far. I have one "problem" yet to solve.
It has something to do with the "Word Prediction / Input Method" and Language screens.
My native language is Dutch. As posted in the screenshots below, you can see it
My question is as follow.
The first screenshot is the "Sndroid Settings Screen" and it is perfectly in Dutch language.
The second screenshot is the "Language & Keyboard" screen in the settings screen. Here it becomes strange, The second option is "Touch input" which you should think als had to be in dutch language. Only the description field is dutch...
The third screenshot is the "Tochs Input" submenu and is in fully english language. Before I "overupload" screenshots all those settings are in dutch input method.
Now it gets more strange!
The fourth screenshot is "typing a message" and the word prediction is in english. I can't get the system put on the dutch word prediction list.
Everything else is in dutch... (or any language you want).
To make the question short...
What files, or which settings have influence on the language system? I loked closely to A LOT of settings in the rom, but I cant find it.
Maybe a fresh look or suggestion may help me in the good direction. I am seeking too much, therefore I may overlook some settings.
Thanks in advance for any answer
Hi,
Is there a way to disable the XT9 spellcheck?
thanks
settings - language & keyboard - HTC sense input - advanced settings - untick word prediction.
you may also want to untick word completion
if you don't want underline the mis-spelled word, off the Post spelling check.
hi, thanks for the reply, but for some reason Web Prediction on my phone is grayed out and cannot be unchecked.
Any possibility the Trace keyboard in On ? If yes, turn it off, do you selection and On again the Trace keyboard if you want to.
this way it worked, but now but swipe is not working.
I would like that when swipe is used (english) spellcheck is enabled and when not spellcheck is disabled.
or at least a shortcut on the keyboard to switch spellcheck on/off would be good too.
I have a few keyboards on my Tab S, but i can't find a way of switching between them.
I can see in my settings that i have Swiftkey, swype and the default samsung one, which it is stuck on. .. i can select either in the settings>General> Language but it doesn't affect the actual keyboard when i come to write things. .. is there a shortcut, or a setting to change the keyboards?
Otherwise, it seems the only way would be to uninstall, then reinstall. .. which seems bonkers. .
Help .. Thanks
I can change my keyboard just fine. Settings, general, language and input, then I just touch the box next the the keyboard i want and then hit default (above the samsung keyboard and pick the one i want. Heres a pictures. Maker sure you change the default to the keyblard you want.
ahh.. the default button... Obviously! Yeah.
Doh!
Thanks..