Develop Bugs

The Coolest Video Software for Trinity...

Hey guys,
I just had to mention this software that I just ran into yesterday. If you've already seen it, I apologize for bringing it up agian...
I installed it yesterday, and it does the coolest thing. I can broadcast LIVE video from my phone that can be seen from a web browser. Not only that, but it also brings up a google map tracking my position in real time.
Set the phone on your vehicle dash, start broadcasting, Drive around, and people can watch your trip in real time with a map showing your location...
I hope I have not double posted about this, but I really wanted to share.
Ok, I just found it was posted in the Development and Hacking forum, but I still think I'll bring it to the Trinity Forum since I've verified it works on the Trinity.
Website
http://www.ix-m.com/gps
Latest CAB is always available here
www.ix-m.com/downloads/livecam.cab
Install the 'Live Media GPS' software on your phone, and the 'Live Media for Windows' on your computer.
Be sure you have the GPS linked up, or it will not broadcast.
You also have the option of viewing your Desktop Computer Video from your Trinity.
I hope somebody enjoys this as much as I am!

Nice to see you here. Great software.
I'm just watching Live Stream - Motorbike - diterex. Fantastic.
Best regards !

nikitto said:
Nice to see you here. Great software.
I'm just watching Live Stream - Motorbike - diterex. Fantastic.
Best regards !
Click to expand...
Click to collapse
Good to see you too.... We miss you over here in WWE Trinity World.
Another cool feature is that you can send instant Audio Clips to the person viewing the video, or Vice Versa. It only takes seconds to send and receive them.

This sounds awesome. I agree that it's always worth reposting in Trinity to show it works. I'll test it soon.
Best to install it on a lite ROM I imagine (not Manila based)?
Mattster.

Mattster_spv said:
This sounds awesome. I agree that it's always worth reposting in Trinity to show it works. I'll test it soon.
Best to install it on a lite ROM I imagine (not Manila based)?
Mattster.
Click to expand...
Click to collapse
Actually, I'm currently running the g77 Manilla rom, and it installed and works fine. So Far.

Getting Started Tips
If you are interested in trying this, here are a few tips:
1. You need to create two seperate accounts for the Mobile version and the Desktop Version. Then you can link the two accounts as Buddies and view the video back and forth. Using the Buddy option keeps others from seeing your video unless you want them to, in which case you can broadcast to the Public pages.
2. After installing to your Mobile, be sure to go into the 'Settings' and then 'Video Recorder' and turn off 'Direct screen mode' to show your video on the Trinity.
3. I've tried leaving the option 'Video with Audio' on and off. It works both ways, but is better video if audio is off.
4. If you'd like to start Broadcasting on your Wife's/Husbands/Kids Trinity, you can enable the 'SMS Activation' option. By sending a text to the phone with the security code, it will start transmitting automatically.
5. As mentioned in an earlier post, the GPS MUST be synced before the Broadcasting will work. It may take a few minutes in clear skies for it to link up, so be patient. (As with any GPS enabled program on the Trinity)
6. Keep in mind that this is probably a HUGE battery drainer. I have not tested how bad, but it IS using the GPS, Camera, Audio, Network, all at the same time. But, if plugged into a charger while driving, it's not a big deal.
7. If you are not connected using WI-FI, BE AWARE that this will connect your Data Connection and might be charging you $$$. I'm on an unlimited Data Plan, so it's not a problem here.
8. Don't Broadcast any "Adult" content to the Public site, or you will be banned. Whatever you do with your Wife/Girlfriend/Dog/Goat/Etc using the Direct Buddy option is up to you...
8. Don't forget to try the 'Send Voice Message' or on the Mobile "Live Talk" feature. It's pretty quick, and AWESOME audio quality.
9. Have Fun!
For now, that's all I can think of. As I use it more, I'll add things if needed. Feel free to do the same.

great!
it seems gpsgate can do these too, exclude video audio sharing
thx

[APP] Shoutcast Streaming App

Hi guys,
As I don't have an xm account anymore (forum.xda-developers.com/showthread.php?p=2954732) I have created a new streaming app (beta for testing), this time the source is shoutcast, tons of free radios.
The app is written in c++ so it runs pretty fast and compatible with wm 5.0 and up, it works in touch screen phones.
Setup:
Download the cab and install on the device.
Usage:
-------------
1. The Categories screen is shown, choose one category from the list and wait until the list is populated (this process just run once).
2. Choose the radio to play; the radio will start to play and then it will try to display the album art in a thumbnail at the bottom of the screen.
Optional
------------
Tap on the album art thumbnail to get a bigger view of it and also have access to the Add to favourites options an to exit to the app.
Add to favourites:
In the larger album art screen tap in the add icon (plus symbol), the station will be add to the favourites list.
Shortcuts:
-----------
Tap on the top label to back to the categories screen at any time
Tap on the status (the bottom label) to exit the application
cheers,
Hlov

thanx for this!

thanks! works great on HD2. Is there a way to add channels??..I seem to be missing the Trance/Techno stations..

DrmMaster said:
thanks! works great on HD2. Is there a way to add channels??..I seem to be missing the Trance/Techno stations..
Click to expand...
Click to collapse
Hey,
thanks for the feedback, As I have mentioned in my post this is in beta so u can tweak it edit the categories.txt file (make a backup of it first and don't change the first line [favourites]) and add a new line with your preferences, the format is keyword|Display ie: Trance|The best trance
Hope this make sense if not reply me and I'll help u,
cheers,
Hlov

Awesome, might cook it into my roms, with credits to you ofc

Works GREAT on my Palm Treo Pro (850).

I think this app is great! Been looking for one for a long time... One question though... anyway you can make it compatible with the crapload of AAC+ stations out there ? I have the accplus plugin dlls from TCPMP if that would help

This app is great! It is so fast! It needs more channels though

very good app
the best radio app i have ever tried, soo good and fast, wish i could add my own stations..keep the good work up..

okidem said:
wish i could add my own stations..keep the good work up..
Click to expand...
Click to collapse
I second that! Hlov, i would also donate my skin making abilities if you wanted, because i've been waiting for a dedicated SHOUTcast app like this one for ages!
In the meantime i've written MortScripts that query and allow me to auto connect to one of my 4 personal streams with CorePlayer.
Great job! I'll be following this thread like a hawk!

Where does it search with the keywords?
I added the keyword "stern" for howard stern. and on shoutcast.com, i get different results (the ones i want) than through the player.
edit: Nevermind, just found out how to add my favorite station with using the station id in the radios.txt file.
Great app!!

It doesn't show me any back button or other button and whenever i click ready (in the bottom) or nice one (while the song is playing), the application exits.
but i like the application. i have touch pro2.
Thanx for the application

options
great start, how do i add custom shoutcast servers?

hlov said:
Hey,
thanks for the feedback, As I have mentioned in my post this is in beta so u can tweak it edit the categories.txt file (make a backup of it first and don't change the first line [favourites]) and add a new line with your preferences, the format is keyword|Display ie: Trance|The best trance
Hope this make sense if not reply me and I'll help u,
cheers,
Hlov
Click to expand...
Click to collapse
Hi, I am really excited about a shoutcast player for winmo, since I use Spider player radio every day on my computer. Anyway, so I tried to add to the categories.txt and adding known shoutcast genre's worked well. I added "House" and "ambient" and both produced a lot of channels. However when I added something like "piano" it only produced 3 channels. I added a category "skyfm" and it didnt come up with anything.
Can the categories added only be the default shoutcast genres?
Is there anyway to add a search in the program?
Also, For pretty much all the things the search results in the program are different then when doing that search on the shoutcast website
Just a few things I have ran into while using your program. Thanks for all the hard work.
One last thing I remembered after the program does the initial search it caches the results and always pulls those back up. Is there anyway to refresh the results without having to delete the file in the program directory named after the search

works great but it doesnt seem to open all of the folders - like it wont open the "alternative" folder for me...but apart from that great first edition! hopefully you'll refine it some more!
it also seems to automatically shut off when the phone turns off after about 1 minute (yes its the settings) but it ought to play like the music player which runs even when the phone is off.
i have an hd2 btw...

man this is awesome! I didn't think twice before installing and it's better than I imagined! yeee thanks!!

This app is great!!! was looking around for something just like this,

great app are there any hiphop station???

Fast & Just works!
This app is great so far! it is quick, simple, and just works! Keep up the great work.

jasond22 said:
great app are there any hiphop station???
Click to expand...
Click to collapse
I added rap|Rap to the categories.txt and it listed quite a few stations.

[Q] Any luck with torrent apps?

Was hoping to find something like Torrent Fu.
Anyway I installed uView utorrent and FSSI Torrent 7 on a free trial. Couldn't get either to work. Then looked at uController but it needs some .net 4 program on my PC to work.
What the hell is going on. I'm not cheap. I will pay £1.99 for a torrent app that works with isohunt.com. Please help.
What about Torrent Remote and Torrential.
Maybe it's my fault.
In uView settings - Your Torrent host I entered my IP address.

Sorry everyone. Its midnight here in London.
I was running utorrent 2.0.4. Normally it updates itself on startup. But this time it didn't update to 2.2. Got 2.2 now. Everything fine.
BTW what torrent app do you like?

Ogner said:
Sorry everyone. Its midnight here in London.
I was running utorrent 2.0.4. Normally it updates itself on startup. But this time it didn't update to 2.2. Got 2.2 now. Everything fine.
BTW what torrent app do you like?
Click to expand...
Click to collapse
Definitely uController. The service running on your PC makes it stand out above the others.

The service for uController is there to provide additional information above and beyond what you'd normally get with the uTorrent webUI.
Namely 'live' tile updates that show how many torrents are currently downloading (in the current build); and
A toast notification whenever a new torrent is added. You can restrict this this so it doesn't ding between certain hours (in the development build).
Admittedly being the developer of uController, I'm biased, but I think those two things make installing a small service on your PC an acceptable proposition.
uController doesn't allow the addition of torrents right now, but it's already implemented in development (via RSS feeds).

dgaust said:
The service for uController is there to provide additional information above and beyond what you'd normally get with the uTorrent webUI.
Namely 'live' tile updates that show how many torrents are currently downloading (in the current build); and
A toast notification whenever a new torrent is added. You can restrict this this so it doesn't ding between certain hours (in the development build).
Admittedly being the developer of uController, I'm biased, but I think those two things make installing a small service on your PC an acceptable proposition.
uController doesn't allow the addition of torrents right now, but it's already implemented in development (via RSS feeds).
Click to expand...
Click to collapse
Can you just make a Fu Torrent clone? No PC software to install. Stop, remove, and pause of torrents. Search torrents available from Isohunt and TPB within the app. And of course add torrents.
This is all I'm asking for. But I'm willing to pay good money to someone who can deliver.

Ogner said:
Can you just make a Fu Torrent clone? No PC software to install. Stop, remove, and pause of torrents. Search torrents available from Isohunt and TPB within the app. And of course add torrents.
This is all I'm asking for. But I'm willing to pay good money to someone who can deliver.
Click to expand...
Click to collapse
Sorry, i won't be doing it. I built this for my own uses, so I build it to suit my needs.
There are 3 other apps that might suit your needs.

I thought they said the microsoft was going to allow torrent apps in wp7. Only apps allowed would be allowed to view your torrents, but not add new ones.

+1 for uController, the live tile works well and the service running on your main torrent pc isn't a big deal.
Looking forward to the update that will allow the adding of torrents from rss feeds. A question for the developer: does this mean you can view the rss feed and select the torrents you want? Is it the service app or the device app downloading the torrent?
Oh yeah, and two small cosmetic things; when you run the app the "connecting to xxx.xxx" message at the top is overlapping the uController title (it looks a little untidy), and the app doesn't remember which group of torrents you were looking at last time you ran the app (ie downloading, or seeding, or what have you), it always reverts to All Torrents (which is a bit slow when you have a lot of torrents).
Great so far though, you wouldn't know how often the other torrent apps are going to get updated but this one is on version 1.2 already.

wheresmybeaver said:
+1 for uController, the live tile works well and the service running on your main torrent pc isn't a big deal.
Click to expand...
Click to collapse
Thanks for the comment
wheresmybeaver said:
Looking forward to the update that will allow the adding of torrents from rss feeds. A question for the developer: does this mean you can view the rss feed and select the torrents you want? Is it the service app or the device app downloading the torrent?
Click to expand...
Click to collapse
You view the RSS feed on the device, but the downloading is done on your PC. Nothing is downloaded on the device (given how small the storage is on some of them, and no background apps, it would be virtaully impossible anyway).
wheresmybeaver said:
Oh yeah, and two small cosmetic things; when you run the app the "connecting to xxx.xxx" message at the top is overlapping the uController title (it looks a little untidy),
Click to expand...
Click to collapse
Yeah, I know. It is designed to mirror other apps that have the loading information across the top of the page, even if it overlaps with other information. Using the light theme it works better as it has a background tint... I might move it centrally like I have done with the RSS feed progress bars.
wheresmybeaver said:
and the app doesn't remember which group of torrents you were looking at last time you ran the app (ie downloading, or seeding, or what have you), it always reverts to All Torrents (which is a bit slow when you have a lot of torrents).
Click to expand...
Click to collapse
I haven't really thought about doing that, but I can add it as an option.
Great so far though, you wouldn't know how often the other torrent apps are going to get updated but this one is on version 1.2 already.[/QUOTE]
Thanks.

v1.3 has hit the market place, you should see the update available soon. The major additions are the ability to add torrents and push notifications when a new torrent is added.
I relation to your enhancements.
wheresmybeaver said:
Oh yeah, and two small cosmetic things; when you run the app the "connecting to xxx.xxx" message at the top is overlapping the uController title (it looks a little untidy),
Click to expand...
Click to collapse
I've tidied this up a bit by adding some chrome background to the text. I tried it in the middle of the page, but it looked worse. The chrome helps the untidiness I think.
wheresmybeaver said:
and the app doesn't remember which group of torrents you were looking at last time you ran the app (ie downloading, or seeding, or what have you), it always reverts to All Torrents (which is a bit slow when you have a lot of torrents).
Click to expand...
Click to collapse
I added this in, however there was some weird behaviour happening. It would work well on the All, Downloading and Paused pivots but would crash out with the stopped and seeding pivots. There is no obvious reason for it, so I had to take it out to do the release.
I'll try to nut it out.
wheresmybeaver said:
Great so far though, you wouldn't know how often the other torrent apps are going to get updated but this one is on version 1.2 already.
Click to expand...
Click to collapse
1.4 was submitted this morning, but it's only a minor release that improves tombstoning support.

dgaust said:
v1.3 has hit the market place, you should see the update available soon. The major additions are the ability to add torrents and push notifications when a new torrent is added.
Click to expand...
Click to collapse
Grabbed the 1.3 update this morning and have been trying it out over lunch. I added some TV Show RSS feeds to the service app this morning before heading out, and I am happy to report that I can see these RSS feeds on my handset and add the torrents that I want from the feed. Works perfectly. I have also been able to set an upload limit for my torrents, great! If I can add one tiny suggestion, that each torrent in the RSS feed might also show the date it was added to the feed? Just in case I end up downloading an episode from a previous week if there was no new episode this week... or would it even be possible to have a * or some other indicator beside a feed that has a new torrent available? thanks
dgaust said:
I relation to your enhancements.
I've tidied this up a bit by adding some chrome background to the text. I tried it in the middle of the page, but it looked worse. The chrome helps the untidiness I think.
Click to expand...
Click to collapse
That looks much tidier indeed thanks! and the "loading torrents" dialogue is a great addition (it was tricky in previous releases to know if the app was busy or not)
dgaust said:
I added this in, however there was some weird behaviour happening. It would work well on the All, Downloading and Paused pivots but would crash out with the stopped and seeding pivots. There is no obvious reason for it, so I had to take it out to do the release.
I'll try to nut it out.
Click to expand...
Click to collapse
Cheers for giving it a go, but actually this update makes torrents appear much faster at launch, so remembering the previous pivot isn't as much of a big deal IMO?
dgaust said:
1.4 was submitted this morning, but it's only a minor release that improves tombstoning support.
Click to expand...
Click to collapse
1.3 was a fantastic update thanks! But the toast notification for new torrents being added: how does this work? Does the RSS feature automatically add new torrents from the RSS feeds you've used previously and then send a notification?
By the way, I've rated the app on the marketplace but it looks like the marketplace reviews are segmented between regions. I'm in Ireland so there are only about a dozen ratings across the entire Marketplace! Bit of a bummer really since it's not possible to see rating and reviews from other regions.

wheresmybeaver said:
If I can add one tiny suggestion, that each torrent in the RSS feed might also show the date it was added to the feed?
Click to expand...
Click to collapse
Shouldn't be a problem to add the date. The feed should contain that information already, it's just a matter of putting it into the UI.
edit: Done.
wheresmybeaver said:
1.3 was a fantastic update thanks! But the toast notification for new torrents being added: how does this work? Does the RSS feature automatically add new torrents from the RSS feeds you've used previously and then send a notification?
Click to expand...
Click to collapse
Nice to hear. Basically it just works for any torrent added during the time period. It's mainly designed to capture torrents automatically added via the RSS function built into uTorrent. It doesn't use the feeds you've added into the client.
wheresmybeaver said:
By the way, I've rated the app on the marketplace but it looks like the marketplace reviews are segmented between regions. I'm in Ireland so there are only about a dozen ratings across the entire Marketplace! Bit of a bummer really since it's not possible to see rating and reviews from other regions.
Click to expand...
Click to collapse
Thanks for the rating... there's only been two so far, so if you are lijuen it's shown up,

dgaust said:
Sorry, i won't be doing it. I built this for my own uses, so I build it to suit my needs.
There are 3 other apps that might suit your needs.
Click to expand...
Click to collapse
Then can you provide clear instructions on how to use it as I can't get it to connect.
Do I configure my WebGUI in utorrent as well or what?

lekki said:
Then can you provide clear instructions on how to use it as I can't get it to connect.
Do I configure my WebGUI in utorrent as well or what?
Click to expand...
Click to collapse
To get started, you really need to know how webUI in uTorrent works.
In essence, if you can get uTorrent and WebUI set up to the extent that you are able to:
(a) Access WebUI from any other computer on your home network
(b) Access WebUI from a computer outside your network via an external IP address. ie from your mobile phone, or a computer at work
...then you will have no trouble setting up uController. Bear in mind that all the uTorrent remote access apps on the marketplace will require that you can configure and setup WebUI. See this for instructions on getting set up.
Once that's done, and you can definitely connect to webUI, follow the instructions pdf for uController here and you'll be grand.

lekki said:
Then can you provide clear instructions on how to use it as I can't get it to connect.
Do I configure my WebGUI in utorrent as well or what?
Click to expand...
Click to collapse
Yes, the service connects to the WebUI so it needs to be set up. Instructions are available and linked in the post above.
The pdf needs to be updated to take into account the features added since release, but the setup should be adequately explained. If you're having any specific problems, let me know.

So we have some torrent apps... that says something about Marketplace approval and copywright issues. So where are the emulators?

[APP][BETA] GPS Calculator PRO [R] 11 APR 2012 [V] 5.5

Hello again fellow windows phone 7 users! Once again I’m looking for people willing to participate in the private beta-testing program of my newest app. The app to be released is called “GPS Calculator PRO” and it will be an even more advanced version of the most advanced GPS calculations app “GPS Calculator”. Currently this app can be used to accurately calculate distances, get altitude information from digital elevation models, calculate areas, project locations and convert coordinates between several different formats, including UTM. New version adds an advanced trip computer, track recording and SkyDrive integration and track and waypoints (favorites) import/export using GPX format. GPS Calculator PRO is an old style app that cannot be described using words like social or fun, but can definitely be described as useful, interesting and doing advanced math. Now, if you use SkyDrive, if you hike, bike or run, if you like GPS technology or want to learn more about it – I need your help.
As per usual process please send me your live-id if you want to try this beta app.

Here is a guide: http://lj2.karlson.ru/wp7/gps/guide_en.htm

You can send me a beta link at davor.radman at hotmail.com

d.a.v.o.r said:
You can send me a beta link at davor.radman at hotmail.com
Click to expand...
Click to collapse
Just sent!

can sent to me @ [email protected]

Thank you, sent.

I try to test it in the evening but I\it ask me to uninstall it.

Ttblondey said:
I try to test it in the evening but I\it ask me to uninstall it.
Click to expand...
Click to collapse
This is weird. Maybe I sent you an outdated link accidentally or the live-id you gave me is not the live-id of your phone. Are you sure mibs68 at-mark hotmail dot com is correct? I can generate a new link for you, if you would like too.

Totally Awesome app!!! Very specialised for cartography needs, you'll never lost yourself with that on your device!! Also a pleasant entertainment app if you're curious about your environment...you can compare how big is your field next to the neighbors ones

Will download the new link tonight.

hm, never got an email..

d.a.v.o.r said:
hm, never got an email..
Click to expand...
Click to collapse
Weird. OK, here is the link, try it on your phone:
http://windowsphone.com/s?appid=135ded04-4f12-47b3-a424-088655b8f8c1

[APP][IR][ALPHA] TvTerminator [Testers needed!]

Hi @ all
As already mentioned in the "3rd party ir app" thread, I'm working on a TV-B-GONE like app for the HTC One.
The app should be capable to:
• Sync tv-off-codes with an online database
• Send all known (in database) codes out through IR blaster
• Learn an off code and upload to database for other users
All these features maybe already work, but I can't test it as I don’t have my HTC ONE yet!
So if you wanna try, download it from and here and give me some feedback in the thread
• There is a good chance that the app doesn’t even start – I can't test any of the IR blaster related functions! – That’s why I need you until I get my phone :laugh:
• The app sends bug reports to me using bugsense – you can disable this feature in the options if you don't want to send reports! If you disable and get an force close -> please send me the logcat
• The database view is not fully implemented, you can list vendors and search for models but if you click on vendor / model nothing will happen
• Database sync on startup can be disabled in settings
• The Database is EMPTY now(except of one vendor), so don’t wonder if nothings getting synced
Used permissions:
• INTERNET -> For online syncing
• ACCESS_NETWORK_STATE -> To pre-check if sync is possible (not in flight mode)
Future:
• Making the app fully work.
• Making a universal remote app with database sync. So any user can scan his codes (not only power off codes), tag them, create remote layouts, upload schemes for a device, etc. Usable for any IR device (tv, hifi, Roomba, etc)
Changelog
(04.05.2013) Version 0.5:
• old IR blaster control
• send code when click on model name in model search box
(03.05.2013) Version 0.5:
• debug toasts
• new IR blaster control
• send all codes on main thread
(03.05.2013) Version 0.4:
• Bugfix where local recorded codes were not sent out
• Removed test buttons
• Learn-Timeout can be adjust in app settings
(03.05.2013) Version 0.3:
• New Send command used, maybe works now with "all off"
• Some test buttons to debug
(02.05.2013) Version 0.2:
• New Code format (sorry, had to purge the whole database). Old Version will not work anymore.
• Some Bugfixes
• Update check on startup
Download link of version 0.6
http://goo.gl/sjXzi

I'll take the plunge
Will let you know how it goes.

Theres already a new entry for a "dreambox" so recording codes (can) work.
Thx for trying!

antifish said:
Theres already a new entry for a "dreambox" so recording codes (can) work.
Thx for trying!
Click to expand...
Click to collapse
Ok. So given her a spin.
nothing happened lol.
installed fine. I have a LG tv and a virgin TiVo digital box (made by Cisco)
when you go to the search box, enter just moves down to the next line. it doesn't "enter" if that makes sense.
See attached pics anyway.
Hope it helps.

Thanks for the info.
That was excepted - you see vendors "sony" (dummy vendor by me) and vendor "" (empty, ill catch that in the next version) which someone who uploaded a code for a dreambox. As mentioned before, database view is not fully implemeted, you only see vendors ("Sony" and "") and models("dreambox") which other ussrr uploaded until now. Please try recording an offcode for one of your devices

Cool.
Sorry, I must of originally miss understood. Thought you had just added Dreambox to the list of others.
Ill keep an eye out for when you add LG on there
Keep up the good work though. What exactly is the end purpose of the app?
From what I can see, it would be a perfect app for me to prank friends and family whilst at home messing with the TV "quickly" instead of going through setting up the tv first.
:victory:

Downloaded.
Was going to try with the TV at my office but its LG also.
Ill test at home with a Samsung and a Panny.

Hi and thanks for this app, i was able to learn 2 codes, it turned off my TVs when using "Test Code (ir)" button before uploading, but once uploaded (the Panasonic one and a Samsung one are mines) i can't use "all off!" command, i'm still stuck at "Sending codes : 4/10" and then it FC ...
Maybe you could add a tool to try code from database (when pushing on a brand name, sending all codes for this brand) and to avoid duplicates ...
ps : sorry for my english

snowblind2142 said:
Cool.
Sorry, I must of originally miss understood. Thought you had just added Dreambox to the list of others.
Ill keep an eye out for when you add LG on there
Keep up the good work though. What exactly is the end purpose of the app?
From what I can see, it would be a perfect app for me to prank friends and family whilst at home messing with the TV "quickly" instead of going through setting up the tv first.
:victory:
Click to expand...
Click to collapse
michael.s.under said:
Downloaded.
Was going to try with the TV at my office but its LG also.
Ill test at home with a Samsung and a Panny.
Click to expand...
Click to collapse
scarabe17 said:
Hi and thanks for this app, i was able to learn 2 codes, it turned off my TVs when using "Test Code (ir)" button before uploading, but once uploaded (the Panasonic one and a Samsung one are mines) i can't use "all off!" command, i'm still stuck at "Sending codes : 4/10" and then it FC ...
Maybe you could add a tool to try code from database (when pushing on a brand name, sending all codes for this brand) and to avoid duplicates ...
ps : sorry for my english
Click to expand...
Click to collapse
Thanks guys for downloading and testing.
I think there is a little misunderstanding here -> i dont add vendors or devices or codes (at least not until i get my HTC ONE finally).
Its you, the useres, which upload codes. If you enter a model or a vendor which is unknown for the database, it will be created and then usable for everybody else.
@scarabe17
Thanks for the feedback. The force closes is becasue there are some wrong ir codes (data is invalid) in the database from failed uploads. will be fixed in the next version.
I have a lot of ideas what to implement in the app, and as mentioned before, the "tv-b-gone" functionalty (send all known off-codes) will be only a "special function".
The end purpose is an universal IR remote app, with community driven code uploads for all kind of devices and codes (not only power off).
There will be a "layout editor" where you can create your own layout with custom buttoms mapped to custom functions, and you will can share that with other users.
regards
antifish

This will be something cool

Please note, there is version 0.2 now!
Dont use 0.1 anymore, new codes will not work and upload will not be possible!
I had to purge the whole database (sorry to you who already uploaded a code) the format in database was a bad choice.
(details: i used java objectwriterstream to serialize the IR data, and if HTC will change something in that class it cant be serialized back without some trouble, so i changed to a json format)
also there should (hopefully) be less force closses.
and there is a check for updates, so you will notice when i upload the next version

uploaded my panasoic tv model
would be nice here to keep an update of model list cause apps, only show sony.
Also you should add a Vol + button cause at the end its more annoying in shops to set volume to the max than turn tv off

nocomp said:
uploaded my panasoic tv model
would be nice here to keep an update of model list cause apps, only show sony.
Also you should add a Vol + button cause at the end its more annoying in shops to set volume to the max than turn tv off
Click to expand...
Click to collapse
Thanks for the upload!
Can you please sync the database (with the sync icon in the actionbar). At least the Panasonic should apper now, as you uploaded it!
(Sony + Pansonic are the only two venors in the database now)

db synced, model showing, but not working.
you should apply for htc ir api for get codes, cause if you fill the db only with ppl having a htc one member of xda, i doubt you ll reach 50 models

Tried to learn my LG Remote. Got 3 different error-messages.
"Out of Frequ"
"Timeout"
and something with "Pulse"

nocomp said:
db synced, model showing, but not working.
you should apply for htc ir api for get codes, cause if you fill the db only with ppl having a htc one member of xda, i doubt you ll reach 50 models
Click to expand...
Click to collapse
what do you mean with "not working"? The database view actually does nothing when clicking on a model or vendor, thats not integrated yet. The only thing which should happen is that when you press "all off" it should turn off your tv :fingers-crossed:
I have the HTC IR API but it does not provide access to the integrated code database (or i don't know how). I'll decompile a ROM to look after the codes when i have time, maybe i find something! Its no easy to try these things as i dont have a HTC ONE at the moment (still waiting)...
I hope that the next HTC models will all have the IR blaster integrated! And when the app is ready i hope that it gets more response and codes in the play store.
When i got time and be in the mood i'll have a look at the galaxy S4, as it have an IR blaster integrated too, and it would be nice to have an app that support every pontetial model.

s60mike said:
Tried to learn my LG Remote. Got 3 different error-messages.
"Out of Frequ"
"Timeout"
and something with "Pulse"
Click to expand...
Click to collapse
how often did you tried to learn the code?
I'll make the timeout variable in the next version.
Maybe it works better in a darker room?

Ola, lemme know if i can help
When i say not working, it means my tv doesnt turn off
Envoyé depuis mon HTC One avec Tapatalk

nocomp said:
Ola, lemme know if i can help
When i say not working, it means my tv doesnt turn off
Envoyé depuis mon HTC One avec Tapatalk
Click to expand...
Click to collapse
Okay, maybe the data is corrupt (in the database), the scanning of the IR code is not as good on the ONE
as desired, or there is a bug in sending the codes.
Can you please learn the code 2..3 times again? I'll can compare the data then and see if the scanned data is
always the same

Oki i ll try
Envoyé depuis mon HTC One avec Tapatalk