my phone(tmo g2,rooted running extrahotsauce rom) is flashing the green and orange lights now that its charging...the battery was fine and i was doing a backup using clockword mod recovery and once that occured i rebooted,then rebooted again into recovery and from then on the phone hasn't turned back on. i put it on charge at first and no light,left it on for a bit and now there's green and orange led lights blinking continuosly,any one know the cause? and more important, the solution? any help would be much appreciated, thanks
someone posted in the evo 4g forums saying the phone was overheating? doubt that was the issue. but now that it isn't working,i am hoping it is
Turned on but kept shutting down on its own,somehow got it into clockwork mod recovery,wiped data and cache(after backing it up), wanted to install the mexdroid rom and the phone shut off again at the end of the wipe,now it just turns on at the htc screen.
when i hold volume+power and get to the boot screen,it wont let me scroll up and down using volume,instead it automatically just tries to update.
stuck at htc screen,just wanna try to restore my phone,any help would be great. thanks and sorry for being such a damn noob
Do you have a pc10img on your sd card? If so, you need to get that off of there to get into recovery. Also, it sounds like something is seriously wrong with the battery and you should replace it.
Sent from my HTC Vision using XDA Premium App
found it,its a zip file right? it wont let me delete it though,is there a certain way to do it?
i have a spare battery,just cant seem to locate it at the moment, might need to buy one if i can't find it soon
nvmm figured it out,lets try it
OMG you are the greatest,its working so far...do i need to put the pc10img back on the sd card in order to install a rom or no?well it wouldn't get to the recovery screen with it on the sd card,sorry i need to get some sleep
NVM,i left pc10img off of the sd card installed the rom,but it wouldn't start,just stayed at the htc screen. I put that file back on the sdcard and it's still just stuck at the white htc screen, know what the issue might be? i have a custom boot animation in there,would that matter?
when i get to the boot screen,it says, s-on at the top,is that why?
If you're s-on then you're not rooted or at least truly rooted, like if you did a temp root with visionary. I would suggest finding the tmo post ota ROM in the development section dated from December, it'll be a PC10IMG, and rooting that with gfree from the wiki. When you have done all that, install ROM Manager from the Market. When you open the app click "Flash Recovery"and you'll be ableto install ROM's from ClockworkMod recovery.
I apologize if you already know some of this stuff, but you sound a bit confused. Hope this helps.
Sent from my HTC Vision using XDA Premium App
heybobitsme said:
If you're s-on then you're not rooted or at least truly rooted, like if you did a temp root with visionary. I would suggest finding the tmo post ota ROM in the development section dated from December, it'll be a PC10IMG, and rooting that with gfree from the wiki. When you have done all that, install ROM Manager from the Market. When you open the app click "Flash Recovery"and you'll be ableto install ROM's from ClockworkMod recovery.
I apologize if you already know some of this stuff, but you sound a bit confused. Hope this helps.
Sent from my HTC Vision using XDA Premium App
Click to expand...
Click to collapse
no need to apologize,you're only helping. i told my friend about the issue, and he reccomended a thread on xda that explains how to turn s-off(and root/unroot). it had been rooted, but yeah like you said it was temp rooted using visionary. ill try these methods and post results. thanks alot
http://forum.xda-developers.com/showthread.php?t=890827&highlight=[Guide]+How+to+Root
so that's the link he sent to me, i was skeptical but still went through with it and yet it still says s-on...i need a guide to show me how to fix just that.
i've never used gfree or wiki,nor do i know how or what of them. is there a thread you can direct me to? ill look for it myself but i think if you were to find it,you'd be able to direct me to the right one since im sure there are multiple threads and you seem to know what's happening and what you're doing
ok so i've tried 5 different methods and nothing seems to result with s-off for me. do i need to unroot and reroot?
i know this thread is old but i just got a referb g2 for my wife and it had this same problem. i found this somewhere else and it actually worked:
try taking out the battery and unplug the charger. then press and hold the power button for roughly a min. Then put the battery back in and press the power button. It should work. it worked for me.
i had tried holding the power button for almost a minute with the battery still in with no luck. doing it this way with the battery out worked though.
Related
Hey guys, I tried to perma root my wife's G2 last night using Visionary+ r14 but when it tried to reboot it doesn't get past the green and white "HTC" screen, so now I have a couple of questions.
I bought this phone from someone off of Craigslist and it was working great until I tried to root it so it is technically out of warranty do you think I can get it replaced since everything is still stock?
Also I tried to apply the HTC OTA update to fix it and I still have the problem, is there anything I can do to repair this phone? Thanks in advance guys and mahalo!
Okay pull your battery out and put it back in..after dat press power button and volume down button until you get to the recovery screen and do a factory reset..
Sent from my HTC Vision using XDA App
Thanks for the reply jboiii15. I did a factory reset before I flashed the OTA update and I have factory reset several times but still no go. I appreciate you taking the time to help me out.
Did you try this? http://forum.xda-developers.com/showthread.php?t=842495
aznsnake666 said:
Did you try this? http://forum.xda-developers.com/showthread.php?t=842495
Click to expand...
Click to collapse
I haven't tried it because I can't get ADB to work with the phone the way it is, Fastboot works but ADB just shows nothing there while I'm in recovery or the boot screen. Thank you also for the reply. My wife is pissed lol.
Try to extract the ROM from the official RUU and rename it to PC10IMG.zip. Put this on the root of your SD card and boot into bootloader and leave it to work. This should solve your problem Fingers Crossed
JD
do you have s-off??
I don't have S-OFF as I just started the rooting procedure when it decided to take a dump on me, after this I don't think my wife will want me to root any more of her phones although I know she'll miss it after having a rooted G1 running CM and a rooted Slide running Chromatic. Good thing I didn't sell her Slide yet lol.
I'll try to find information on the PC10IMG.zip method now and see what can be done.
Thank you guys for all the help, I really appreciate it all.
itsmekeoni said:
I don't have S-OFF as I just started the rooting procedure when it decided to take a dump on me, after this I don't think my wife will want me to root any more of her phones although I know she'll miss it after having a rooted G1 running CM and a rooted Slide running Chromatic. Good thing I didn't sell her Slide yet lol.
I'll try to find information on the PC10IMG.zip method now and see what can be done.
Thank you guys for all the help, I really appreciate it all.
Click to expand...
Click to collapse
I think the rooting process has corrupted your kernel or rom, it is rare to get a brick from just the visionary process, but i know there has at least been one that this has happened to.
Report back to tell us if the extracted ROM worked for you, there is still hope;')
JD
Oh man this is just getting worse lol. I had the phone sitting here plugged into my laptop while the phone was in the Hboot screen where you can select Fastboot, Recovery and so on. All of a sudden my here Windows give off the noise as if something was connected or disconnected from my computer and I see the screen shut off on the G2 with a red light blinking. Now the phone doesn't power on and the red light blinks while the phone is plugged into the computer but doesn't power on.
As I was typing this the red light came on solid as if it is charging now, maybe it doesn't charge while in that screen and the battery just died I dunno, strange.
JupiterDroid said:
I think the rooting process has corrupted your kernel or rom, it is rare to get a brick from just the visionary process, but i know there has at least been one that this has happened to.
Report back to tell us if the extracted ROM worked for you, there is still hope;')
JD
Click to expand...
Click to collapse
Well I called T-Mobile and they are sending out a new phone, I'm unsure if I should still mess with it or not. I did flash the TMOUSA OTA update and that didn't help, I didn't unpack it to see if it contained a new Kernel but I'm sure it had a new system.img, still think it is one of those that is messed up?
I'm having a hard time finding the things to get the PC10IMG.zip going, work is calling me in different directions and my A.D.D is kicking in lol.
try this http://forum.xda-developers.com/showthread.php?t=855764 i had the same problem like you, steviewevie told me to do it, if you have problem to connect your g2 with sdk download pda net, it works for me and now i have my g2 back with the new root... just do what it said on that link believe me works...
P.D. I am a androidnoober always have a iphone and this was my first time using sdk adb or whatever name is and I did it
Thanks AndroidNoober, I've seen that link in my search for an answer to my problem. One of the issues that is making this harder is that after the phone "bricked" it lost ADB connectivity. I've tried it on two computers that have a properly working ADB (I test it with my N1 and 3G Slide) and it used to work with the G2 but now I can't get it to see the phone, I've heard Recovery has ADB blocked.
semi bricked attempting permaroot
i attempted permaroot and semi bricked my phone. will not boot past htc screen. i can't get adb to work. i am trying to get pdanet installed but it keeps getting stuck on installing on phone. can it install while phone is in recovery mode? i have had no sucess trying to figure this out on my own and phone is not covered with a warranty
i have gotten the phone to read an update.zip file.
it is reading the pc10img.zip as well.
now i just have to get past the htc screen.
i do have s-on as i had just started the process.
any help would be appreciated
Just rooted my new DINC, got into the main screen. Went into Clockwork and flashed a nandroid from a different device. Now I cant even get back into CWM. If I hold down and power I get hboot, but anything after that gives me 5 vibrations and blinking green lights. wtf?>
I can actually see CWM for a second, then i get the errors. Is there a bootable CWM, like the NookColor?
DroidHam said:
I can actually see CWM for a second, then i get the errors. Is there a bootable CWM, like the NookColor?
Click to expand...
Click to collapse
not really that i know of
best bet is to ruu back to stock and start over
EDIT: first link i sent wont help you
http://d01.megashares.com/index.php?d01=CHoQD3B
put this on your sdcard, rename to PB31IMG.ZIP
boot into hboot, when it asks to apply the update, say yes
give that a shot
for future reference, nandroids from phones are not interchangeable
I dont know how to use ADB, and that tutorial assumes you can run zips via recovery, which I cant...
Isn't there a PMBTG113.zip or whatever file I can boot off of in recovery that will restore my phone to stock
DroidHam said:
Isn't there a PMBTG113.zip or whatever file I can boot off of in recovery that will restore my phone to stock
Click to expand...
Click to collapse
yea sorry, use the new link and destructions instructions i posted, should get ya running
damn, that link wont start the download
Do you have a micro sd card reader that you can put into your pc or laptop? You need to get that PB31IMG on the root of your card. Then get into hboot to flash.
Sent from my ADR6300 using XDA App
Yea, I put it onto the root, applied the PB31IMG and rebooted. Same fcking problem. WTF?!?!
DroidHam,
try pulling the battery, wait around 10 minutes, put the battery in and boot the phone. Yes, it is very important to wait for that long.
Post your results if it booted or not, i had the same issue.
Also let me know if this is a refurbished phone.
ya its a refurb...
I downloaded this:
build-3.26.605.1-release-152016-baseband-2.15.00.07.28-hboot-0.92.0000_PB31IMG
Renamed it and it flashed. Then when I rebooted, it doesn't show me CWM anymore, just the HTC screen, a "popping, kind of electric noise", and then 5 vibrations and blank screen, with green blinking LED.
I downloaded the restore above, and renamed it. It doesn't allow me to flash it. It scans it, but never gives me the option to press up to flash.
Keep in mind, S-ON is now set, whereas it was S-Off before.
Previously I was seeing CWM for a split second then it would crash. I dont see CWM anymore but its still crashing at the same point.
If I copied a nandroid backup onto a different phone, it cant be COMPLETELY ****ed right? Just needs to be rebuilt somehow?
So when I put the battery back in in 10 minutes, should I reflash that RUU I mentioned above, or what?
Any ideas?? Going on day 3 w no phone......
Sent from my LogicPD Zoom2 using XDA App
DroidHam said:
Any ideas?? Going on day 3 w no phone......
Sent from my LogicPD Zoom2 using XDA App
Click to expand...
Click to collapse
I noticed you mentioned that while powering on you say you are holding down...down is diagnostic mode, you should be holding up to get to recovery.
After applying the ruu. Try re rooting
Sent from my ADR6300 using XDA App
How do I root if i can't get past hboot??!
Sent from my LogicPD Zoom2 using XDA App
I attempted to root a new Incredible for a friend and had the same thing happen a few days ago. I was able to create a nandroid backup via CWM recovery, and then flashed CM 6.1. CM then bootlooped when trying to boot for the first time. After this point I was unable to get into recovery. The screen would just go blank and would vibrate multiple times. At one point I did manage to succesfully get into CWM recovery without the screen going blank, but then recovery would not recognize the SD card. I restarted and was never able to get back into recovery.
I then attempted to flash a PB31IMG.ZIP from HBOOT that was supposed to restore it to factory state. At this point the phone when blank in the middle of flashing and would not do anything other than vibrate when I would attempt to power it on.
I told them the phone just inexplicably died and they exchanged it at the Verizon store. Everything went perfect with the replacement phone. I figured what happened was a one time thing, but after reading this I would definately be hesitant to root anyone elses Incredible.
Do all phones have hboot?? I don't wanna get screwed. But this was sent was Asurion.... i really need to fix this. There must be a way please!!!
Sent from my LogicPD Zoom2 using XDA App
Just got off work... do the battery pull, wait 10 min, then the start phone see what happens.
I'm not sure at what point you are with the RUU image at this point so take out your sd card just to be safe.
You are getting into the Qualcomm diagnostic mode, which is basically 5 buzzes and then the green light keeps flashing green correct?
I will be on and off for the next few hours to see your results.
DroidHam said:
ya its a refurb...
I downloaded this:
build-3.26.605.1-release-152016-baseband-2.15.00.07.28-hboot-0.92.0000_PB31IMG
Renamed it and it flashed. Then when I rebooted, it doesn't show me CWM anymore, just the HTC screen, a "popping, kind of electric noise", and then 5 vibrations and blank screen, with green blinking LED.
I downloaded the restore above, and renamed it. It doesn't allow me to flash it. It scans it, but never gives me the option to press up to flash.
Keep in mind, S-ON is now set, whereas it was S-Off before.
Previously I was seeing CWM for a split second then it would crash. I dont see CWM anymore but its still crashing at the same point.
If I copied a nandroid backup onto a different phone, it cant be COMPLETELY ****ed right? Just needs to be rebuilt somehow?
So when I put the battery back in in 10 minutes, should I reflash that RUU I mentioned above, or what?
Click to expand...
Click to collapse
5 vibrate = defective usb plug/phone... time for nother refurb. theres a couple posts on it, happened to me.
I don't know much.. but I'm pretty sure this thread is in the wrong section. Mods should move this to Q&A or General...
Hi I'm new to the mytouch slide family coming from a Motorola Defy and I'm having a hard time going into the recovery mode. Everytime I try get the red triangle warning. I've watched videos, read ROM bible and other post and still no luck. My slide is rooted by VISIOnary Temproot but with root at boot selected. I've been at this for 3 days trying not to bother anyone on the forum for a solution but now I need help!!!! Also I have ROM Manager and loaded Clockwork Recovery through ROM Manager.
Thanks-
Under ROM manager the 2nd option says reboot into recovery. Im pretty sure you tried that right? You can also get to this by turning off the phone and hold the vol down button and press power.
Oops. then select recovery
hoped this helped
htccraze said:
Under ROM manager the 2nd option says reboot into recovery. Im pretty sure you tried that right? You can also get to this by turning off the phone and hold the vol down button and press power.
Oops. then select recovery
hoped this helped
Click to expand...
Click to collapse
Thanks for the quick reply but yes I've done the the power button with the down vol button and once I select recovery I get the same outcome (Red Triangle). I've even selected the boot into recovery from ROM Manager and the same thing happens (Red Triangle).
Sorry i couldn't be of any help. I did a quick search on yahoo and found this. Seems you aren't alone. Maybe you'll find what you need here.
http://www.droidforums.net/forum/droid-hacks/28278-cant-get-into-recovery.html
http://androidforums.com/evo-4g-all-things-root/181591-red-triangle-explanation-mark.html
htccraze said:
Sorry i couldn't be of any help. I did a quick search on yahoo and found this. Seems you aren't alone. Maybe you'll find what you need here.
http://www.droidforums.net/forum/droid-hacks/28278-cant-get-into-recovery.html
http://androidforums.com/evo-4g-all-things-root/181591-red-triangle-explanation-mark.html
Click to expand...
Click to collapse
Thanks I'll take a look.
Still no luck. Someone please help!
Ive never heard of that root method. Are you sure youre rooted? You did say you used a temp root method. Every time you power down youre probably breaking root. First, download an app that needs root, like titanium backup. If it fails to load, you dont have root and that will be why you get a red triangle everytime. I would try rooting using a full proof way listed in the development section. Also, i dont use rom manager but i've heard of issues using that to get recovery.
Sent from my T-Mobile myTouch 3G Slide using XDA App
guitarist5122 said:
Ive never heard of that root method. Are you sure youre rooted? You did say you used a temp root method. Every time you power down youre probably breaking root. First, download an app that needs root, like titanium backup. If it fails to load, you dont have root and that will be why you get a red triangle everytime. I would try rooting using a full proof way listed in the development section. Also, i dont use rom manager but i've heard of issues using that to get recovery.
Sent from my T-Mobile myTouch 3G Slide using XDA App
Click to expand...
Click to collapse
VISIONary is used to temp root the G2. With VISIONary you can select to temp root your phone on boot, so that's what I selected.I tried it on my slide and it worked. May I ask what method you use? I will try the full proof way.
Thanks-
I cant give you a link since im not at a computer, but its called " [UTIL] New Root Method as of 8/13! -> UPDATED 12/30 for NOOBS! <- " and its stickied in the development section. I used this the second time i rooted my phone (decided to update with tmobile's ota and it broke my first root).
Sent from my T-Mobile myTouch 3G Slide using XDA App
I think I may have found the solution to my problem but I'm looking for the HTCsync.zip that I cannot find. If somebody know where I could find please let me know.
Thanks-
Htc sync? What would you need that for. As long as you phone is visible to the computer you shouldnt need htc sync. I know i have never used it
Sent from my T-Mobile myTouch 3G Slide using XDA App
at the red triangle screen you push vol up + power I believe -- can't remember exactly and no longer have stock recovery to check with. But it is just another button combination.
HTH
Temp root apps don't root your phone, regardless of boot settings. You need to have the eng build flashed through hboot to be able to get into a recovery that will flash self signed zips such as clockwork. No matter what you do, without fully rooting using a method in the development section, you will not be able to flash clockwork or any custom rom. Temp root only allows you to run root apps inside of android.
Sent from my T-Mobile myTouch 3G Slide
Thanks I finally got it rooted!
guitarist5122 said:
Htc sync? What would you need that for. As long as you phone is visible to the computer you shouldnt need htc sync. I know i have never used it
Sent from my T-Mobile myTouch 3G Slide using XDA App
Click to expand...
Click to collapse
As for that, it's the easiest way of obtaining the ADB drivers for the slide, as the slide is only plug n play as far as mass storage, not its adb interface. I'm sure there are other methods, but installing HTC sync is the easiest.
Need help!!! Recovery
I have succesfully root my girlfriends slide and s-off. but i tried to flash cwm 2.5 thru fastboot and now cannot get into recovery neither factory with triangle or cwm. How do i fix this or will i have to unroot bascially and start over to get the recovery .img again? Also, who can help with permanently flashing cw recovery so that i do not have to use the update.zip method.?
poor2rican1 said:
I have succesfully root my girlfriends slide and s-off. but i tried to flash cwm 2.5 thru fastboot and now cannot get into recovery neither factory with triangle or cwm. How do i fix this or will i have to unroot bascially and start over to get the recovery .img again? Also, who can help with permanently flashing cw recovery so that i do not have to use the update.zip method.?
Click to expand...
Click to collapse
Did you try to fastboot flash the update.zip? That's not good, you should've flashed the cw2.5 .img file. No, you don't have to reroot or res-off, but download the .img file for the latest clockwork recovery on koush's website, for our device. Then, on your computer, while in fastboot mode and plugged into usb, type
fastboot flash recovery filename.img
obviously replacing filename.img with the actual file name/location.
Please help me figure this out...
I also cannot get into recovery mode. Here's my story:
I have a rooted (Supersonic EVT2-2 SHIP S-OFF; HBOOT-0.93.0000) EVO (I know that this is a MyTouch thread, but I couldn't find any similar issues at the EVO thread) that I'm running Warm 2.2 RLS 4 on. I have it set up the way that I wanted and it is running perfect (enough for me).
Yesterday, I caught a glimpse of the MIUI ROM that has an iPhone theme so I wanted to try it out. So, I used Titanium to back up my apps and data to my SD card (8GB with 3GB open). Then, I went to ROM Manager to back up my ROM. I saw that there was an update for the ClockworkMod Recovery so flashed it up to 3.0.0.5. Then I went to Backup Current ROM, kept the suggested name, and hit OK. After a few seconds, the Splash Screen briefly shows, the phone buzzes and then I'm on the initial Bootloader menu screen (with the three Androids at the bottom).
I highlight Bootloader, then I hit the Power button to go to the next set of menus, and the phone does it's checks. After the checks, I push the Volume Down button to go to Recovery, then hit the Power button. The splash screen (white HTC EVO 4G) shows again, the phone buzzes, and I'm back at the initial Bootloader screen.
Whether I use the Quick Boot app, the ROM Manager app, or the Power and Volume Down method, I cannot get past the Bootloader screen to get into Recovery. All I get is Splash, buzz, then the initial Bootloader. Warm 2.2 RLS4 is a nice stable ROM, but I am starting to feel limited, which is why I rooted the phone a few months ago.
Could someone PLEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEZZZZSSSSSSEEEEE help me with this? I am far from a comp engineer, but I can follow instructions pretty well.
Thanks a million!
njgoodfella2199: You're really going to be better off asking in the EVO forums. Good luck!
Yeah, we don't know much about the evo or how it works compared to our gsm phones. The way rom manager updates it may be different. You might be able to use the same solution, find the img file of the latest clockwork and fastboot flash it, but ask on the evo q&a.
Sent from my T-Mobile myTouch 3G Slide
Please help! I've been trying to find answers and trying to fix my G2 this whole week and, to even add how much im working/reading on how trying to fix it, i even stayed up a WHOLE night reading about things but still no-go
G2 is semi-bricked because my brother was going to permanently root the G2 and right when the process finished, is when the phone was semi-bricked because he "forgot" a step (great -_- human error)
Just a few things:
Yeah i can go into recovery (VOL down + Power Button) but, im a noob at recovery things, so i dont know how or what to use or do like i said, i've researched a lot and done the steps that i read online and still nothing, so i rather get answers/help from great people in here (i heard this forum is really smart/good at Android stuff)
please help!
XvideogamerX said:
Please help! I've been trying to find answers and trying to fix my G2 this whole week and, to even add how much im working/reading on how trying to fix it, i even stayed up a WHOLE night reading about things but still no-go
G2 is semi-bricked because my brother was going to permanently root the G2 and right when the process finished, is when the phone was semi-bricked because he "forgot" a step (great -_- human error)
Just a few things:
Yeah i can go into recovery (VOL down + Power Button) but, im a noob at recovery things, so i dont know how or what to use or do like i said, i've researched a lot and done the steps that i read online and still nothing, so i rather get answers/help from great people in here (i heard this forum is really smart/good at Android stuff)
please help!
Click to expand...
Click to collapse
explain your semi bricked status... how do you know its semi bricked? which step did he miss?
also you be better off asking in guide how to recover semi bricked phone rather than asking in Q & A....experienced mods usually follow that thread and reply to ppl who have queries
it wont go into the Android OS, it just stays stuck at HTC. No further. And he didnt tell me, but he watched a video on youtube.
and ohhh darn -_- stupid me
XvideogamerX said:
it wont go into the Android OS, it just stays stuck at HTC. No further. And he didnt tell me, but he watched a video on youtube.
and ohhh darn -_- stupid me
Click to expand...
Click to collapse
here is the link to the desire z /G2 wiki...
http://forum.xda-developers.com/wiki/index.php?title=HTC_Vision
go straight to the rooting section and try to find out which method was he using to root your phone... when you narrow that down try to find which step he missed.....when all thats done than either post here exactly which method was he using and which step he missed.....or post in the semi bricked page.....
right now the most current recommended method is using Gfree...
also try to see if you have access to your recovery and if clockworkmod recovery is installed or not....
for that take out your battery and put it back in.... hold volume down and power button....
it will boot into boot loader
give it few seconds to display that "waiting for SD card Pb10.img not found"
than use volume down button to navigate to recovery and use power button as click selection..... if it boots up into clockworkmod recovery than you have custom recovery installed
Yeah i dont have CWM installed, just checked. And what my brother told me is that he was "temporary rooted" then he tried to "perm root", but actually, he didnt go to youtube, he tried to perm root using the VISIONary method.
XvideogamerX said:
Yeah i dont have CWM installed, just checked. And what my brother told me is that he was "temporary rooted" then he tried to "perm root", but actually, he didnt go to youtube, he tried to perm root using the VISIONary method.
Click to expand...
Click to collapse
check wiki for htc vision ... for how to fix errors during rooting.....
also if you wanna root gfree is recommended software lately..... check wiki to confirm.....
also try factory reset.... by turning phone off... than holding power button and volume up and down button .... i think.....confirm via wiki
Well i also cant do any adb steps because adb doesnt detect my G2 (although it detects it when im in recovery (the menu with a phone and red exclamation point) but it says its offline) i can only use fastboot
and btw my G2 is S-ON
and i have done factory resets and nothing
I'm not as experianced as a lot of the but have you tryed the pc10img via fast boot? That might work scince everything is stock on your phone
/edit have you gone the the adb guides it took me a few times but I finally got it...adb looks the best way to go
Sent from my T-Mobile G2 using XDA Premium App
yeah but when i use PC10IMG it just says main version is older (or something like that) and says update failed.
and yeah i have seen tons of ADB guides, but still doesnt work what guide did you use? how'd you do it?
XvideogamerX said:
yeah but when i use PC10IMG it just says main version is older (or something like that) and says update failed.
and yeah i have seen tons of ADB guides, but still doesnt work what guide did you use? how'd you do it?
Click to expand...
Click to collapse
it might be because you tried the 1.12 verison pc10img.zip and your phone came with updated 1.19 version
PC10IMG_Vision_TMOUS_1.19.531.1_Radio_12.21.60.09b _26.02.01.15_M2_release_149459_signed.zip
try this one by putting in your sd card. your phone should flash it and it shouldnt say version is older...
download from here
http://shipped-roms.com/index.php?category=android&model=Vision
when you put it in sd card rename it to just PC10img.zip and reboot into bootloader and when it asks you to flash. let it flash
I'll try that right now, but I think I did use the 1.19 one but can't recall.
I'll edit this post to tell you if it works
EDIT:It still says Main Version is Older...you think i need to use the 1.12 one?
BTW here is my G2 info (radio version etc.)
VISION PVT SHIP S-ON
HBOOT-0.82.0000
MICROP-0425
RADIO-26.03.02.26_M
eMMC-boot
Sep 2 2010, 17:59:38
I'm on my phone so I canot link but under the stickies you will see a thread about un rooting your phone now you will need to do the hex editing step and replace it then try the pc10img and see if that will work
Sent from my T-Mobile G2 using XDA Premium App
This is a link to the latest update for Tmobile G2. Give this a try and see if it works for you.
http://android.clients.google.com/p...US_1.22.531.8-1.1.19.531.1_release_signed.zip
# Rename the file to “update.zip” (If you don’t see the file extension, assume it’s already in zip format and just name the file ‘update’)
# Transfer the file to the root of the SD card (in no folder)
# Turn G2 off.
# Turn G2 on by holding power and holding volume down. Once it boots, you’ll be given a white screen with Androids skateboarding. Wait for the green text to flash on the screen, and then by using your volume up and down keys, go to recovery and press the power button,
# The phone will reboot itself into recovery, and you will see a black screen with a phone and a red triangle with an exclamation mark in the middle. We need to see the text in the recovery, so at the same time press the power button and volume up. It may take a few tries.
# Once the text appears, using the volume rocker, navigate to Apply sdcard:update.zip
# Let it install and reboot your phone.
EdKeys said:
This is a link to the latest update for Tmobile G2. Give this a try and see if it works for you.
http://android.clients.google.com/p...US_1.22.531.8-1.1.19.531.1_release_signed.zip
# Rename the file to “update.zip” (If you don’t see the file extension, assume it’s already in zip format and just name the file ‘update’)
# Transfer the file to the root of the SD card (in no folder)
# Turn G2 off.
# Turn G2 on by holding power and holding volume down. Once it boots, you’ll be given a white screen with Androids skateboarding. Wait for the green text to flash on the screen, and then by using your volume up and down keys, go to recovery and press the power button,
# The phone will reboot itself into recovery, and you will see a black screen with a phone and a red triangle with an exclamation mark in the middle. We need to see the text in the recovery, so at the same time press the power button and volume up. It may take a few tries.
# Once the text appears, using the volume rocker, navigate to Apply sdcard:update.zip
# Let it install and reboot your phone.
Click to expand...
Click to collapse
Alright ill try this as well, and tell you if it works
EDIT: yeah i updated it, and it worked fine, but im still stuck on the HTC logo
dakkywantstodocrazysht said:
I'm on my phone so I canot link but under the stickies you will see a thread about un rooting your phone now you will need to do the hex editing step and replace it then try the pc10img and see if that will work
Click to expand...
Click to collapse
ill try that if the method on top of your quote doesnt work
thank you both for helping,ill thank your guys post
EDIT: i read the guide (at least i think its the one your talking about, there are a ton of guides out there of how to unroot) and it says i need to get the misc.img from my phone....i cant because i cant adb since it doesnt detect my phone (but fastboot does)
XvideogamerX said:
Alright ill try this as well, and tell you if it works
EDIT: yeah i updated it, and it worked fine, but im still stuck on the HTC logo
Click to expand...
Click to collapse
Sorry that didn't work for you. Here's another method and zip you can try...its worked for some others:
http://forum.xda-developers.com/showpost.php?p=10583834&postcount=33
Alright ill try that out thanks
EDIT:Hmm...thats strange. Right after it checks the PC10IMG.zip ,it doesnt tell me anything else, it just goes back to the recovery menu (where it shows Fastboot, Recovery, Factory Reset etc.) shouldnt it say if i wanted to update?
Well I think it loads the pc10 and then auto does it it might ask first tho I'm not sure...there have been issues with windows 7abd what os are you running?
XvideogamerX said:
Alright ill try that out thanks
EDIT:Hmm...thats strange. Right after it checks the PC10IMG.zip ,it doesnt tell me anything else, it just goes back to the recovery menu (where it shows Fastboot, Recovery, Factory Reset etc.) shouldnt it say if i wanted to update?
Click to expand...
Click to collapse
Sent from my HTC Vision using XDA App
dakkywantstodocrazysht said:
Well I think it loads the pc10 and then auto does it it might ask first tho I'm not sure...there have been issues with windows 7abd what os are you running?
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
Windows 7, and i read about that too -_-
and auto does it? like it automaticly flashes it??
Yeah it automaticaly might..are you running 32 or 64 bit os?
XvideogamerX said:
Windows 7, and i read about that too -_-
and auto does it? like it automaticly flashes it??
Click to expand...
Click to collapse
Sent from my HTC Vision using XDA App
dakkywantstodocrazysht said:
Yeah it automaticaly might..are you running 32 or 64 bit os?
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
How would I know that? No conformation message or anything comes up :/ and 64-bit (which I read is the one that has the most problems)
i have purchased a 2nd hand desire z from someone, i noticed it has clockwork and rom manager installed, i think it also has super user rights. I also noticed that the rom is Virtuous 1.0.1. Thinking this meant that the phone was already rooted, i used rom manager to download and install CM7, however it caused the phone to be semi bricked, then i also realised that the phone was also S-ON.
Fortunately i managed to reboot the phone into CWM and restored the previous image, so now the question is, what is wrong?
PS. new to this whole android thingy..
hmmm... sounds like MAYBE you had a temp root?? Is you had superuser you definitely had some form of root, however, i am not sure you can flash a new rom if you dont have S-off (but i could be TOTALLY wrong here)
I have an Evo (and dont have this temp root issue), but i am helping a friend with a similar problem with his G2.
Can you get into recovery? (while phone is off, hold the volume down and power on the phone) If you can, do you have Clockwork recovery or stock android (says 3e at the top i think)?? If you have CW, just enable USB, download a CM7 through your computer, put it on your SD and flash it. SHould be good to go.
If you have stock recovery and S-on.. WELCOME TO MY BOAT... I am trying to find a solution to this for my friends phone. If i figure it out, i can let you know (please do the same??)
I am having the same problem, with the same rom. I can use all root apps, but it says S is ON? I can't put any other rom on my phone with out it going into boot loop or just staying on, HTC screen. Some one please help us, I know there are many phone guru's on this site. Any help would be over the top. O-yeah and I can not get the wifi to connect either says error or turns it self off after scanning? Please please please help. Thank you in advance.
Sent from my SGH-T959 using XDA App
[email protected] said:
I am having the same problem, with the same rom. I can use all root apps, but it says S is ON? I can't put any other rom on my phone with out it going into boot loop or just staying on, HTC screen. Some one please help us, I know there are many phone guru's on this site. Any help would be over the top. O-yeah and I can not get the wifi to connect either says error or turns it self off after scanning? Please please please help. Thank you in advance.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
If you can boot to an OS, you are WAY ahead lol. Here is description of my problem: http://forum.xda-developers.com/showthread.php?t=1009593
CHeck the links in that post. MAY be able to help if you can boot to OS?
frettfreak said:
Can you get into recovery? (while phone is off, hold the volume down and power on the phone) If you can, do you have Clockwork recovery or stock android (says 3e at the top i think)?? If you have CW, just enable USB, download a CM7 through your computer, put it on your SD and flash it. SHould be good to go.
Click to expand...
Click to collapse
tried using CW to flash CM7 again.. no go.. just stuck at HTC screen after rebooting...
i was also reading thru the goldcard portion of the guides. Should i create one so that i can downgrade my phone back to an earlier ROM? Would appreciate some help to get permaroot.
ok.. i have managed to downgrade to an older rom and did a full root after that.. finally managed to get cm7 working..
was using this guide all the way..
http://forum.xda-developers.com/showthread.php?t=905261