Related
Hi All,
I have a problem with my SD card. My phone doesn't recognise SD card after I created ext4 partition through partition magic on windows 7. Here is what happened.
- I have rooted desire running CM 7.0.3.
- I wanted to go back to Starburst 1.4 rom.
- I have class 4 16 gb sd card (fat + ext3) with 512 mb of ext3 and rest fat32 (this was when everything was running good)
- I flashed the new rom through CWM, but only got like 54 mb on sd left.
- So I manually formatted ext3 and changed it to ext4 using partition magic on windows 7 (connected sd card through a reader).
- After that I flashed the new rom, but still got the same size left.
- After that I went back to CM7.0.3 which is working fine for me.
However, at this time, my phone doesn't recognise my SD card.
- I saw that I can't format ext in recovery as i get this error
E:Can't mount /dev/block/mmcblk0p2(File exists)
Error mounting SDEXT: !
I believe I was able to install CM7.0.3 coz it was a small rom was fit directly into phone's internal memory.
At this time, I can't see my SD card on phone. Can't play music or install any files or anything.
Looking for some quick help.
Thanks,
Satyam
Hi,
I had the same problem.
I got someone to format my SD card in there phone, then reverthing worked.
Regards
Matt
topgunmatt said:
Hi,
I had the same problem.
I got someone to format my SD card in there phone, then reverthing worked.
Regards
Matt
Click to expand...
Click to collapse
Hi Matt,
So are you saying that you got your SD card formatted by someone else using Rom Manager ?
- As of now, when I click on the inbuilt ROM Manager in CM7, it says " The SD Card needs to be mounted to use ROM Manager!"
That means my SD card is abviously not read by my phone.
Looking for some help. I don't want to do something silly at this time.
Atleast, as of now my phone is not bricked and is working, just the SD is not.
Any suggestions/comments or link to my problem is more than welcome.
Thank You
Hmmm, i smell another usb brick here, we've had so many these days, and all by people using cwm and flashing gb sense roms...just to prove i'm right, can you connect the phone to your pc? If you're not able to do that, then u have 100% chance it's a usb brick.
OMG !! yeah you're right.. now when I connected my phone using a USB, it doesn't give me the option to "mount USB".
What do to from here ? I don't know what is a USB brick and am pretty poor with linux commands !!!
Plz help.. However I can see a a couple of ROMs through recovery mode in my SD card, but can't flash those which require an EXT.
Plz help !!!!!
sroy001 said:
OMG !! yeah you're right.. now when I connected my phone using a USB, it doesn't give me the option to "mount USB".
What do to from here ? I don't know what is a USB brick and am pretty poor with linux commands !!!
Plz help.. However I can see a a couple of ROMs through recovery mode in my SD card, but can't flash those which require an EXT.
Plz help !!!!!
Click to expand...
Click to collapse
Haha, calm down its'no biggie believe me
Here you can find a tutorial on how to fix it: http://forum.xda-developers.com/showthread.php?t=691639
Feel free to ask if you need further help (bus is farkin boring).
vnvman said:
Haha, calm down its'no biggie believe me
Here you can find a tutorial on how to fix it: http://forum.xda-developers.com/showthread.php?t=691639
Feel free to ask if you need further help (bus is farkin boring).
Click to expand...
Click to collapse
Hi,
Are you saying that formatting SD card and making fresh ext partition through a media reader will not help in this case ?
I am very confused so to say.. I read the link that you posted, it talks about CID which I'm not able to find.. Can't see that option in fast boot (recovery).
Is there some other way to fix all this ?
Any more tricks/ suggestions are more than welcome..
Please see detailed info about my issue in the post
sroy001 said:
Hi,
Are you saying that formatting SD card and making fresh ext partition through a media reader will not help in this case ?
I am very confused so to say.. I read the link that you posted, it talks about CID which I'm not able to find.. Can't see that option in fast boot (recovery).
Is there some other way to fix all this ?
Any more tricks/ suggestions are more than welcome..
Please see detailed info about my issue in the post
Click to expand...
Click to collapse
Nope: i'm sorry but there is no other way...the problem lies in the misc partition, and that one doesn't get touched by simply toying with your sd, it's on nand, and no rom flashing/nandroid restore can touch it either. This process is the only way to go. CID can be obtained via adb command, i hope you'll have it installed and set up correctly.
i just fixed my brick lol . i found out bcuz i coulnt enable bluetooth
vnvman said:
Nope: i'm sorry but there is no other way...the problem lies in the misc partition, and that one doesn't get touched by simply toying with your sd, it's on nand, and no rom flashing/nandroid restore can touch it either. This process is the only way to go. CID can be obtained via adb command, i hope you'll have it installed and set up correctly.
Click to expand...
Click to collapse
Hi,
Okay I get it.. I need to fix my nand partition, now question -
1) I can figure out the 1st step "Find out your CID. Go into fastboot mode, and do 'fastboot oem boot" - Nothing happens when I click on fast boot option in recovery mode. The other method CID generator also asks for CID.. how do I get that.. that's my biggest question.
2) How can I see the rom version.
I know, I might me sounding stupid, but I'm not a pro.. used to love flashing new ROMs earlier and this time I just messed it up.
Need some step-by-step help.. I might be asking for too much, but I trust this forum and believe Android has too many fans hooked to it.. so I will get some help
sroy001 said:
Hi,
Okay I get it.. I need to fix my nand partition, now question -
1) I can figure out the 1st step "Find out your CID. Go into fastboot mode, and do 'fastboot oem boot" - Nothing happens when I click on fast boot option in recovery mode. The other method CID generator also asks for CID.. how do I get that.. that's my biggest question.
2) How can I see the rom version.
I know, I might me sounding stupid, but I'm not a pro.. used to love flashing new ROMs earlier and this time I just messed it up.
Need some step-by-step help.. I might be asking for too much, but I trust this forum and believe Android has too many fans hooked to it.. so I will get some help
Click to expand...
Click to collapse
Also just want to let the forum know that I'm running a custom ROM (CM 7) and don't see the option of software info under Settings>About phone. Any other way to find out rom version ???????/
Ok, sorry man, i was out for a ride
To see the CID you have to type "fastboot oem boot" in the terminal, after navigating to the path where you have the sdk, for example:
"cd c:/sdk/tools"
"fastboot oem boot"
Then you should get all the info, together with the CID ofc...obviously you need to have adb installed and working in order to do that (there ia a lot of tutorials for that, just use the search function).
As to rom version, you don't need it, just download the mtd0.img, open it with the hex editor and mod it with your CID, then go for the next step
I dont believe you have bricked your phone, i think you have created a partition on it without making it a primary partition along with the fat32 parition.
boot into recovery and mount your SD card to your PC. Reformat the whole card and then it should work again, you may just be able to go into your partition software and amend to show 'primary' on each, if not read on. Couple of options then, download ROM manager from the market and reformat the ext3 using rom manger if not do it via your windows software but make sure both partitions are set to 'Primary'.
vis-tec said:
I dont believe you have bricked your phone, i think you have created a partition on it without making it a primary partition along with the fat32 parition.
boot into recovery and mount your SD card to your PC. Reformat the whole card and then it should work again, you may just be able to go into your partition software and amend to show 'primary' on each, if not read on. Couple of options then, download ROM manager from the market and reformat the ext3 using rom manger if not do it via your windows software but make sure both partitions are set to 'Primary'.
Click to expand...
Click to collapse
It's a usb brick, not a plain brick: when you plug it to pc the phone usually doesn't even light up the led.
sorry, i read that he had full use of his phone bar the SD card
- I saw that I can't format ext in recovery as i get this error
E:Can't mount /dev/block/mmcblk0p2(File exists)
Error mounting SDEXT: !
Click to expand...
Click to collapse
hi, seems you got bad partition on your sd card, since it s normal that you can't mount sd while plug on usb.
did you already put out your sd card out the phone and try to read it with a usb scard reader plug on your computer??
cid error mean you have messed-up your misc partition which is the one in your nand where the recovery is located... didn't see any error about this in your thread...
in the boot, should fail with error misc partiton cid unknown etc...
have a try about sd card reader it's easer than misc error fix
give a try on this site and try using gparted cd live... don't need to be expert in linux command (it s a graphical interface) should you know that FIRST FAT32 PRIMARY partition and LAST EXT3 (is less fast but really more stable and relyable fs) PRIMARY partition
hi, still me sorry for spamming, just found a nice TUT using gparted on xda http://forum.xda-developers.com/showthread.php?t=535914
fragargon said:
hi, seems you got bad partition on your sd card, since it s normal that you can't mount sd while plug on usb.
did you already put out your sd card out the phone and try to read it with a usb scard reader plug on your computer??
cid error mean you have messed-up your misc partition which is the one in your nand where the recovery is located... didn't see any error about this in your thread...
in the boot, should fail with error misc partiton cid unknown etc...
have a try about sd card reader it's easer than misc error fix
give a try on this site and try using gparted cd live... don't need to be expert in linux command (it s a graphical interface) should you know that FIRST FAT32 PRIMARY partition and LAST EXT3 (is less fast but really more stable and relyable fs) PRIMARY partition
Click to expand...
Click to collapse
Fixing misc doesn't take more than a minute if you have a working adb...repartitioning micro sd card takes loads of time instead, especially if it's big, coz you have to backup all of your data then copy them back, and that's a pain, especially if the sd isn't very fast.
Anyway you might be right there, just the other day a guy had a similar issue caused by multiple ext partitions not being recognized properly. I just thought it was a usb brick coz it's very common since the new gb sense roms rolled out and people started partitioning like crazy with cwm (which really SUCKS at that), and this either cause misc corruption or messed partitions on sd card: i'd suggest everyone to partition with amon them flash back any 3.0+ cwm to flash the rom, if you don't have the chance of using linux live cd (but you really should).
All sorted --------- RESLOVED !!!!
Okay Listen all Desire Owners-- I was able to fix this USB brick without having to go through all which was available on internet..
What I did -
1) Came home and formatted my EXT4 to ext3 and simply reflashed cm7 rom
All worked like charm - Now My SD card is mountable and works perfectly
Good for you
Anyway make sure you set up adb properly on your pc, it will save your life some day: it takes a while but it's worth it...i wouldn't get inti the rom flashing thing without it. Just a suggestion
Bests.
Hi Guys.
Basically, I was running Leedroid 3.0.8.2 and fancied checking out his new HD Rom (LeeDrOiD HD V3.3.1-Port-R2). I did a Nandroid backup and copied everything over to my computer.
I then formatted my SD as I needed a 1gb ext 3 partition and I only had a 512mb. I tried doing this is Mini Tool Partition Wizard. It seemed successful but whenever I try to flash the rom it doesn't work, and in Recovery it won't mount sd ext.
I've currently just got my 8GB SD Card formatted and ready to go, but without partition as I don't know what else to do.
All my phone does now is start up, and get stuck at a screen flashing an Android logo. I CAN get into recovery.
I've tried flashing an RUU from Fastboot but it always says either wrong RUU or no usb connection.
I've tried unrooting but it does not find the phone over usb as I cannot boot it up properly.
My info is:
BRAVO PVT1 SHIP S-ON
HBOOT-0.93.0001
MICROP-031D
RADIO - 5.17.05.08
Don't know what else to do!
Thanks for any help
Sam
Smithyster said:
Hi Guys.
Basically, I was running Leedroid 3.0.8.2 and fancied checking out his new HD Rom (LeeDrOiD HD V3.3.1-Port-R2). I did a Nandroid backup and copied everything over to my computer.
I then formatted my SD as I needed a 1gb ext 3 partition and I only had a 512mb. I tried doing this is Mini Tool Partition Wizard. It seemed successful but whenever I try to flash the rom it doesn't work, and in Recovery it won't mount sd ext.
I've currently just got my 8GB SD Card formatted and ready to go, but without partition as I don't know what else to do.
All my phone does now is start up, and get stuck at a screen flashing an Android logo. I CAN get into recovery.
I've tried flashing an RUU from Fastboot but it always says either wrong RUU or no usb connection.
I've tried unrooting but it does not find the phone over usb as I cannot boot it up properly.
My info is:
BRAVO PVT1 SHIP S-ON
HBOOT-0.93.0001
MICROP-031D
RADIO - 5.17.05.08
Don't know what else to do!
Thanks for any help
Sam
Click to expand...
Click to collapse
You've USB bricked your phone.
Start your phone in fastboot (back button + power) and issue fastboot enableqxdm 0 command.
When you partition your SD make sure that Fat partition is first and that both FAT and ext partitions are primary.
paul.c said:
You've USB bricked your phone.
Start your phone in fastboot (back button + power) and issue fastboot enableqxdm 0 command.
When you partition your SD make sure that Fat partition is first and that both FAT and ext partitions are primary.
Click to expand...
Click to collapse
Thanks for your reply.
Not sure what you mean though. It's in fastboot and I type in that command, but it does not give me access to the sd card, and what do I do after?
Smithyster said:
Thanks for your reply.
Not sure what you mean though. It's in fastboot and I type in that command, but it does not give me access to the sd card, and what do I do after?
Click to expand...
Click to collapse
Check this out: http://forum.xda-developers.com/showthread.php?p=15120208#post15120208
paul.c said:
Check this out: http://forum.xda-developers.com/showthread.php?p=15120208#post15120208
Click to expand...
Click to collapse
I've tried partitioning with Mini Tool again, and it again says "e can't mount dev block mmcblk0p2"
One important thing you have to note during partition via MINI TOOL. .. is that.. when you create partition.. please make sure your both partitions are PRIMARY .. try this and flash the ROM again.
Thanks for your reply.
Just managed to Partition with Gparted. I had been selecting primary partitions with Mini Tool, but the phone could never find the partition for whatever reason.
Just tried intalling the Leedroid HD rom again, and have got to setup. FIngers Crossed
Isn't the HD ROM solely for the Desire HD and not the Desire Bravo though?
So i installed http://forum.xda-developers.com/showthread.php?t=1040121
i rooted my phone yesterday and today tried install that rom i installed it with
http://theunlockr.com/2010/09/21/how-to-load-a-custom-rom-on-the-htc-desire-2/ guide after install it said it was succesfully installed and i tried reboot it and now i cannot open it normally.
I can go recovery mode by pressing power + volume down
Can some1 help me what should i do?
In most circumstances it is because your sd card is not properly formatted or you have flashed the wrong data table. I think it is probably becuase of the sd card, make sure you format with a fat 32 and a ext4 partition. You can do this very easily with your recovery program or with gparted. If this fails I would flash a simple rooted rom to get the phone up and running and then read the forum. I assure you that is is not as complicated as it all seems
can some1 give me link for guide to format with a fat 32 and a ext4 partition
or simple rooted rom to i can get my phone back to work?
This is a rooted stock rom
http://forum.xda-developers.com/showthread.php?t=833310
Download this, put it on your sd card and flash it exactly as you flashed your previous rom, this will get the phone working again. I would then simply download and install Clockwork Mod recovery or 4ext recovery, both these will sort you sd card out. You simply want a fat32 with a 1gb ext 3 partition. Once this has been done you can then look at installing more complex roms.
If you get stuck lt me know and I will try and help, I was in the same place a year ago!!!!
Sorry, use this rooted rom as the other link requires sd ext
http://forum.xda-developers.com/showthread.php?t=741775
everything u need is in this thread, videos too (ext4 with Gparted, see Step 5)
http://forum.xda-developers.com/showthread.php?t=1016084
denatwork said:
everything u need is in this thread, videos too (ext4 with Gparted, see Step 5)
http://forum.xda-developers.com/showthread.php?t=1016084
Click to expand...
Click to collapse
how that will help when i cannot even open my phone exept recovery mode
tonil92 said:
how that will help when i cannot even open my phone exept recovery mode
Click to expand...
Click to collapse
.... because you're partitioning your SD-CARD.. and as far as I know that can be taken out of the phone no?
you can use gparted or minitool partition wizard (google the names). Most ROMs require a minimum of 512mb EXT Partition but 1GB is advisable. EXT3 is preferable, as the faster EXT4 is not compatible with all ROMS
u've asked for the link... i'gave u the link...
use a cardreader and boot not from ur smart, but from usb and do the same steps as in video described
Hi!
I got some question related to Partition SD card.
Running RCMix S v2.0 CM7
Right now i have 6.42 Gb fat32 and 1Gb Ext 3.
I partition this using CWM-Alpharev recovery 2.5.1.8
When i try to use Gparted to partition to Ext 4 while am on Rcmi. The rom wont able to read the sd and it restart. After it got stuck at "why so serious" screen so i pulled battery out and get into recovery to flash the rom again. Thats when i ran you another problem i get cant mount error. "E:Can't mount /dev/block/mmcblk0p1 (or /dev/block/mmcblk0) (No such file or directory) E: Can't mount SDCARD:" I has tried all the usb fix thing but no luck. The only way i fixed it turn it back to 1 Gb Ext 3 partition.
My question is!
Is there a a way to partition to Ext 4? and is Ext 4 better than Ext 3. Can i stay with Ext 3 since the ROM am using a2sd doesn't work since i keep getting Low on internal storage.
Also, I cant make gold card since i cant put new sd card in phone. The phone wont boot up after it get stuck at "why so serious."
hi try to flash different recovery and format (not wipe) all partitions and flash it again... at the moment im using 4ext recovery:
http://forum.xda-developers.com/showthread.php?t=1154221
or RMD recovery:
http://forum.xda-developers.com/showthread.php?t=1137763
what hboot you using?
Does RcMixS boots if you are using ext3? If yes, stick with it. Ext4 is just faster than ext3, but you should not get any problems. RcMixS requires only an ext partition, not a special type.
Hboot-0.93.0001
Bravo PVT3 SHIP S-OFF
Radio-4.08.00.09
and yes RcMixs work fine with ext3 and that only ext that work with the recovery.
It is safe to flash new recovery?
It depdends. Are you S-OFF? If, then yes. If not, then no.
Bravo PVT3 SHIP S-OFF
It said it off so that mean it safe?
And if it is. How can i flash new recovery?
If you how what you do when using fastboot and check the md5 after downloading the recovery.img, I would say: Yes, it's save.
Flashing new recovery via fastboot is very easy:
1.) Download the recovery you want. In my opinion 4EXTRecovery and RMD Recovery are currently the best ones.
2.) After downloading, check the md5!
3.) Install adb on your computer. An installation can be found in my signature.
4.) Boot your phone into fastboot mode (Turn it off, press and hold back and power button a few seconds until a white screen with FASTBOOT in red highlighted letters appears).
5.) Connect your phone to your computer via USB (FASTBOOT should change to FASTBOOT USB).
6.) Open cmd in computer (I assume you are using windows) and enter
Code:
fastboot devices
The output should say
HT********** fastboot devices. The **** are placeholders for numbers. If you get this output, fastboot sees your phone.
7.) Now type
Code:
fastboot erase recovery
to delete the recovery.
8.) When finished, type
Code:
fastboot flash recovery C:\recovery.img
I assume the recovery image you want to flash is stored on partition C: and named recovery.img.
9.) You are done.
Thanks you so much. It worked. I got a another questions. It regard of updating radio. My current radio version is 4.08.00.09. It is important to update to latest version or am fine at current radio?
You only really need to update your radio if there are problems. So if you really need to update your radio, make sure your hboot has >40 mb on cache partition. Otherwise, it will fail and can cause big problems. But mostly nothings happens. So if you have a /cache partition with <40 mb, you have to flash radio via fastboot. A guide can be found here on xda.
Do you know how to check if hboot have more than 40 mb or less on cache partition?
There no problem right now. I just want to know just in case later in future something wrong, and i know what to do.
And thank you very much for helping out.
Download quick system info pro from market.
SwiftKeyed from dGB using Transparent XDA App
One last question. Sorry for so many questions.
Do you know how make goldcard? I tried to make one following instructions on web but it said i need put spare SD card in phone and boot up but the thing is the current rom am using. Which is RCmix 2.0 it need sd ext to boot up or phone will get stuck at S-OFF screen.
Creating a goldcard is very easy:
http://android.modaco.com/topic/308798-pc-application-goldcardtool/
Put the microSD card in your device and boot it.
That part i got stuck at. The thing is went i put a new sd card in phone and boot up. It wont boot into the phone just get stuck at the splash screen. Like i said before. I believe the rom am currently using (RCmix 2.0) need sd-ext to run.
Overread that, my bad. You are right, RcMixS needs ext partition to boot up. Configure your sd card appropriate.
What do you mean configure my sd card? You mean to make my spare sd fat 32 and ext 3 but dont i need copy the content from ext 3 on my other sd card to the spare one?
Configure=partition. I thought you were not be able to start the rom? So there won't be any data on sd-ext because this partition is only for apps. All other content have to be copied to FAT32 partition.
Ok ill try that then. Does it matter if there contents and ext 3 partition in sd card while make a goldcard?
Partitioning a card will break gold as it rewrites the boot of the card, where the goldcard.img is. Although I haven't tried it myself, I believe creating a gold card after partitioning should be fine.
Well that what i mean partition so phone boot up and create the phone. Can i also make one using Sd card reader to make goldcard rather than put sd card in phone and make it there?
Hi i am using my desire fir nearly 2 yrs and have flash many roms with all hboot. Now when i'm trying to flash a rom with either cm7 or cm7r2 hboot , the phone won't boot. I have fllow the instruction on this thread http://forum.xda-developers.com/showthread.php?t=1192984 but still the same. can anyone help me to sort it out.
Thanks in advance
What hboot you have now and what is the rom in question?
SwiftKeyed from my HTC Desire using XDA App.
I have the same problem..
I'm trying to use sebastian15's Runnymede 4.8 ROM.
Any ideas?
I flashed the CM7r2 hboot, wiped data, cache, dalvik, rebooted to recovery, flashed ROM, rebooted, now I'm stuck at HTC splash screen.
Yorba said:
I have the same problem..
I'm trying to use sebastian15's Runnymede 4.8 ROM.
Any ideas?
I flashed the CM7r2 hboot, wiped data, cache, dalvik, rebooted to recovery, flashed ROM, rebooted, now I'm stuck at HTC splash screen.
Click to expand...
Click to collapse
I guess you should partition your SD card: the most common is 1gb ext, rest is fat.
I already did that using gparted. 1gb ext4 and rest fat32
Set both partitions primary? Created first FAT and then EXT partition?
SwiftKeyed from dGB with Transparent XDA App
ya both are Set primary partitions . I have created the fat partition first and then ext 4.
rajesh1108 said:
ya both are Set primary partitions . I have created the fat partition first and then ext 4.
Click to expand...
Click to collapse
Same here guys,
CM7r2, 1GB EXT4, 7GBFAT32. Used Aurora 0.41, decided to change to insertacoin as aurora wasn't very stable and looked like partition wasn't working correctly. Pus, EXT4 partition is gone aswell
My sd card isnt readable on Recovery either (recognisable on pc though).
I've tried fastboot oem enable qxdm 0 - Still nothing. Card gives "unable to mount" message. Been at this for 8 hours now....
BUT, when i insert different sd card - seems fine...
vidrom said:
Same here guys,
CM7r2, 1GB EXT4, 7GBFAT32. Used Aurora 0.41, decided to change to insertacoin as aurora wasn't very stable and looked like partition wasn't working correctly. Pus, EXT4 partition is gone aswell
My sd card isnt readable on Recovery either (recognisable on pc though).
I've tried fastboot oem enable qxdm 0 - Still nothing. Card gives "unable to mount" message. Been at this for 8 hours now....
BUT, when i insert different sd card - seems fine...
Click to expand...
Click to collapse
OHHHHHH,
Finally looks like i'm all working.
I had to use my spare sd card to load Oxygen http://forum.xda-developers.com/showthread.php?t=971904
This enabled me to reformat my sd card (that was unrecognisable previously) on my phone - after rebooting the phone twice to recognise the card ( mounting and dismounting).
Card is now back to full capacity of 8GB. I've applied EXT4 1GB again, loaded Insertcoin and it's all GOOD!!!!
In terms of faulty EXT4 - performing fastboot oem enable qxdm 0 seemed to erase all the partitions and bring the card to factory state.
Hope some of you will find it useful.
Good luck to yall and MASSIVE thanks to those posting advice on this forum!!!
The case of vidrom is not the same as mine. see the first post it state clearly that i can't flash rom with cm7 or cm7r2 hboot. nothing to do with card can't recognise. I'm still searching for a solution.
Hey rajesh1108,
Have you tried flashing with Android Flasher ?
http://forum.xda-developers.com/showthread.php?t=794638
I found it to be the easiest way to getting around flashing.
I was once stuck with at boot load and basically redid everything from the beginning using a different guide. Try following this:
http://androidforums.com/desire-all...all-about-rooting-updated-21-july-2011-a.html
Sorry i cant be specific - i'm quite new to all this.
GOOD LUCK!
What rom are you trying to flash?
@vidrom:
Excuse me, but how should your post help the OP?
I solved my problem! Updated my recovery to a new version of Clockwork using ROM Manager.
i'm trying to flash runnymede 4.8.
Yorba which version of recovery are u using. how did u proceed. updated recovery and then flash hboot(cm7r2) and then flash your rom?
I would flash Hboot, recovery and then rom. Are you sure you wiped everything? Created an ext4 partition with at least 512 MB?
ya i have flash the same way you have mention and my ext 4 is 1gb