Develop Bugs

USB detection when connected to computer not working!(*POSSIBLY FIXED*)

- I think I found a fix and it was quite easy to be honest. All I did was reinstall HTC SYNC and my computer is recognizing my phone now. Only thing is, i'm pretty sure if you want to use adb you had to uninstall this.
- Another solution is to update the RADIO on your phone to the newest version. (CREDIT GOES TO HAZAKINS FOR FINDING THIS)
I successfully rooted 2.2 today with the new guide. The first rom I flashed was RevE and noticed that when I plugged in my usb, to my computer, the notification bar would show up with the option of mounting or charging and then disappear after a second. Not only that, the phone didn't charge at all while connected and the notification bar was clear and didn't tell me whether I was charging only, ect even though it usually does.
The only way I am able to access my SD card is strictly through recovery now by mounting the usb. Other than that, there is no other way for me to access my SD card. Let me be clear that YES I have tried more than one USB port and usb cable but still there has been no luck. Let me also add that it was working fine before rooting.
Also, I just flashed to CM R2 successfully and the same issue still exists. I'm not really sure what else to do.
One interesting thing, if this means anything, that I found, was that I saw the My HTC drivers in device manager only when I accessed my SD card through recovery, it never appeared when I tried to connect my phone to my computer outside of recovery.
So, I'm not really sure what else to do. I have rebooted both my phone and my computer and I am really leaning towards the fact that it may have to do with the My HTC drivers. The thing is though, add or remove programs doesn't show My HTC when my phone is connected to the homescreen. But, I did manage to uninstall it while in recovery mode and as soon as I went back to the homescreen the driver installed so fast that I couldn't stop it from installing.
So, I have no idea what to do

I just confirmed that I am not the only one with this issue in IRC. We both narrowed it down to the driver being the issue. I'm not sure how exactly I can delete it though because it only shows up for an instant and then disappears. It isn't even in add or remove programs.

When you connect your phone, try toggling the USB Debugging off and then back on. I had similar problem (not exactly the same) and this is what worked for me.
Sent from my PC36100 using XDA App

I actually had this exact same problem... all the way up until I tried a different usb port... so I guess I got lucky.
But the one port was working fine up until I put the new ROM on it. Then it stopped working. Then I had to use a different port. I was able to do that... But now after phone reboot and PC reboot, 1st usb port works fine.
I hope it starts working for you.

I did same thing having same problem, I even downloaded another rom with rom manager and installed it, still same problem. When I plug in my USB cord it will pop up for a second on the phone to ask my charge or drive the goes away before i can do anything.

mikebeam said:
I did same thing having same problem, I even downloaded another rom with rom manager and installed it, still same problem. When I plug in my USB cord it will pop up for a second on the phone to ask my charge or drive the goes away before i can do anything.
Click to expand...
Click to collapse
basically sums up my issue.

OK Here is the fix, buy a mini sdcard reader copy the pc36img file to your sdcard using this reader, install back in phone boot into recovery and let it update, then startover root process, this worked for me, I haven't update to 2.2 yet, but I got usb back

sombdy said:
When you connect your phone, try toggling the USB Debugging off and then back on. I had similar problem (not exactly the same) and this is what worked for me.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Posting again.
Did you try this? Simple fix.
Sent from my PC36100 using XDA App

My fix was to get rid of the extension USB cable extender I was using. Apparently the signal degrades too much across it. I tried 3 different extender cables too.

sombdy said:
Posting again.
Did you try this? Simple fix.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
I tried that, it was a no go.

I had the same issue. Using Unrevoked states to uninstall the HTC sync drivers. Just reinstall them and it should charge your phone. That worked for me...

weidnerj said:
I had the same issue. Using Unrevoked states to uninstall the HTC sync drivers. Just reinstall them and it should charge your phone. That worked for me...
Click to expand...
Click to collapse
I did that, twice, and the same issue is occurring.

Also having the same problem after the 2.2 down grade.

Same problem
I can't mount my SDcard either. I followed the new video tutorial to get root on phones that came with 2.2. I think something went wrong when i got that out of memory write error. I have tried two different computers and all their usb spots. I have not been able to mount sd card yet. It does charge however. Any ideas as what to do?? Oddly enough i was able to get Amon-ra recovery flashed so doesn't that mean i have full root??

Seems like a good amount of people are having this issue. If someone comes across a fix please share!!!

Try uninstalling My HTC and HTC Installer Drivers (I forgot the exact name) and then reinstalling HTC SYNC.

Got mine to work
on some other forum someone tried flashing the radios to the newest version and fixed the problem. I tried this as well and came back here to let you guys know that it worked for me also.
here is a link to the radio files.
link::::forum.xda-developers.com/showthread.php?t=715485

Easy fix: Uninstall the HTC software, then reinstall it.
This should reinstall the driver for your EVO.

the HTC software uninstall and reinstall didnt work for me. Wish it would have.

hazakins said:
the HTC software uninstall and reinstall didnt work for me. Wish it would have.
Click to expand...
Click to collapse
Mine was working until I booted into recovery. Drivers got installed automatically and now I can't connect my phone to my PC again : /

Rooting help

Hi I have a epic. Rooting for the first time... I have put the phone into debbuging. I have installed the drivers. I have downloaded one click root from xda. I either get phone is not connected or rage the cage file is missing. and is there any way i can pay for the root to get done. Plz help.
Thanks in Advance.... C- Flo

Delete ur current root files, unzip the files again, shut off ur anti virus and try it again. Be patient. It takes a little while. Tomorrow afternoon I will be making a how to video on how to properly root the epic and install a custom rom.
Sent from my SPH-D700 using XDA App

Also if it says phone is not connected make sure the drivers are installed correctly on the pc
Sent From My Evo Killer!

musclehead84 said:
Also if it says phone is not connected make sure the drivers are installed correctly on the pc
Sent From My Evo Killer!
Click to expand...
Click to collapse
Chances are musclehead84 is right, in my personal exprience, I had to reinstall the driver serveral times in order to make it work...
Ohh and something I noticed with my netbook is that only one of the usb ports actually works with my phone, so maybe it is the same for you.
Try this (and please anyone correct me if I'm wrong):
1)re-install the drivers just to make sure everything is okay
2)plug in your phone to all the different usb ports until you actually manage to get your computer to read your phone and you are able to transfer files from your computer to your phone's sd card with the usb cable
3)once you figure out what ports work with your phone, unplug your phone, extract the file again and enable usb debugging via settings>application>development>usb debugging
4)plug in you phone and run the program and BE PATIENT it does take a while...I have already prima-bricked my phone form being impatient and panicing while flashing my phone with odin (not to scare you)
Hope it helps
Sent from my SPH-D700 on the new syndicaterom frozen 1.1.0 with twilight kernel 1.1.0 @ 1.3 ghz!!! using XDA App

Computer does not recognize my Phone HELLLLLLLPPPPPP!!!!

Ok sorry to be posting the same thread again but i cant seem to get any help ive tried asking in other threads but got no help.........so no computer will recognize my phone i need to odin back to stock to take my phone into the sprint store cause i cant hear anyone except through the headset or bluetooth i have
i have tried reinstalling drivers 3 different usb cords and 2 computers one was a PC and the other was a Laptop both used to work now nothing if there isnt a way to get it to recgonize it is there anyway else to get back to stock id really appriciate ur help
btw im on the newest sfr 1.2

thall302559 said:
Ok sorry to be posting the same thread again but i cant seem to get any help ive tried asking in other threads but got no help.........so no computer will recognize my phone i need to odin back to stock to take my phone into the sprint store cause i cant hear anyone except through the headset or bluetooth i have
i have tried reinstalling drivers 3 different usb cords and 2 computers one was a PC and the other was a Laptop both used to work now nothing if there isnt a way to get it to recgonize it is there anyway else to get back to stock id really appriciate ur help
btw im on the newest sfr 1.2
Click to expand...
Click to collapse
I read something about not using a computer to root; but I could not find anything on getting back to stock without a computer (the question was posed on a few different sites).
My only thought would be to have someone on stock rom, to root and do a backup with CWM; then copy that backup folder off their phone to someplace you could download it using your phone (like google documents).
then you could boot to recovery and flash EXT42RFS.zip from :
http://forum.xda-developers.com/showthread.php?t=1109362
then use cwm to restore from that backup and it would put stock ec05 on your phone; seemingly back to stock except for the recovery.

thats what i was thinking also couldnt find a downloadable back up to put on to my phone if any one is willing to help me with a flashable backup for clockwork mod im using version 3.0.0.6 i think

Similar issue.
I am looking into a solution. Let me get right back at you.

SpyFi said:
I am looking into a solution. Let me get right back at you.
Click to expand...
Click to collapse
that would be appriciated i kno alot of people having this issue would be nice to get a fix the more the better

As far as I know there is no way to unroot without a computer. However you can make it look like stock for the return. When you installed CWM 3.0.0.6 on your phone and it converted to EXT4 it made a nand backup called beforeEXT4conversion or something like that. Restore that nand and do a factory data reset from inside settings>privacy on your phone.

Click on my video link in my signature. I have a way to unroot without a pc video.
Sent from my SPH-D700 using XDA App

Who knows, that may also fix your phone to connect again. Does it make the connection noise on the computer? If so, go into Control Panel, System, Device Manager and look for something connected to your USB or Other. It will probably say Samsung Android. Choose Update Drivers on that and it will take about 10 minutes to get the drivers and install and you should be able to work from the computer again.

qbking77 said:
Click on my video link in my signature. I have a way to unroot without a pc video.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
I need to see that myself....thanks q!

Damn that video on unroot w/o PC is sweet.
Dowloadning those files just incase too.

Ok here's another problem I erased the before EXT4 backup when I formatted my sd cause I thought that could have been an issue....will using another persons back up work???? And if so can someone give me theirs????
Sent from my SPH-D700 using XDA App

and also my computer doesnt make the connection noise
Sent from my SPH-D700 using XDA App

Is anyone able to give me their before EXT4 backup????? Plz lol
Sent from my Nexus S with a keyboard!

PC data transfer issues

I have upgraded to an S3 from having a Vibrant for years. I rooted and flashed several OS's to my Vibrant in those years without an issue ever. I have been trying to get files transferred to my S3 from my computer for 2 weeks now. The computer has the drivers installed correctly. It is recognized by name when I plug it in (it comes up as SGH-T999, Kies will recognize it too). whenever i try to transfer ANYTHING it stops in the middle of the transfer. just sits there with no further progress to be achieved. This is insanely frustrating. I am unable to root this thing because of the inability to actually transfer.
Things I have tried:
Uninstalling/reinstalling Kies multiple times
Uninstalling all USB device drivers multiple times
Reinstalling drivers through Kies and through Samsung's website multiple times
Factory reset on the phone multiple times (****ing aggravating btw)
Using my old Vibrant cable
Changing between MTP and camera mode... several times
Yelling at it
I have been trying to research how to fix this garbage for weeks now. there is no concrete way to remedy this problem that i have found. every thread about this is littered with the usual "uninstall your driver and reinstall it" nonsense that is the most generic response to anything tech related ever.
What I can tell you is that my phone is definitely getting recognized by anything that can do so. Odin, Kies, My computer, etc etc... it appears that the issue lies in the actual data transfer. As I mentioned, transfers initiate but will lock up mid-process and just hang there infinitely. Same goes with Odin when I try to get it to flash into CWM recovery.
Please, help. any time spent trying to fix this issue is greatly appreciated.

Are you uding the usb cable thst came with the phone?
Have you tried different cables? Or on another computer?
Im guessing your not rooted then?
Try installing the drivers ONLY. get them here:
http://forum.xda-developers.com/showthread.php?t=1728605
Uninstall previous versions of everything first.
What version odin are you using? Use 3.07 from above post if you're not already.
Also try this app
http://forum.xda-developers.com/showthread.php?t=1711009
If you are rooted try SwiFTP or another wireless transfer app.
Sorry to mention drivers again but if you're relying on kies to do that for you it could be the issue.
Sent from my SGH-T999 using xda app-developers app
---------- Post added at 01:41 PM ---------- Previous post was at 01:40 PM ----------
Sorry I missed the part where you mentioned drivers and cable. Damn choppy xda app!
Sent from my SGH-T999 using xda app-developers app

Since you've tried everything else might as well follow this guide and install the drivers through the toolkit.
http://forum.xda-developers.com/showthread.php?p=28175575
I'd also run windows update and check if there's a new bios/drivers for your mobo and usb controller.
If you plug another "foreign" usb device does it install fine?

May not have any bearing whatsoever here but do you have usb debugging checked? And I think I mentioned it in the other post but try a different computer if possible.
You said that this happens when using odin too? As in you start the flash with Odin but it doesn't complete? Or it wont even start? Does it give you any message?
When plugged in in download mode, does Odin show your COM port in the upper left?
Plug in the phone and open device manager. Does it show any errors or anything?
Sent from my SGH-T999 using xda app-developers app

I recommend an app called airdroid. I had issues transferring stuff to and from my Mac and haven't had any problems since I started using the program. Besides it's wireless so I don't have to worry about the wires being a problem

psykhotic said:
Since you've tried everything else might as well follow this guide and install the drivers through the toolkit.
http://forum.xda-developers.com/showthread.php?p=28175575
I'd also run windows update and check if there's a new bios/drivers for your mobo and usb controller.
If you plug another "foreign" usb device does it install fine?
Click to expand...
Click to collapse
everything else works fine from my 6 USB ports (2 USB 3.0 ports as well). The tool kit solution still needs Odin to root. The problem is not detecting the device. it is the transferring of data. Data transfers begin but that's about it. Odin gets to "firmware update start" and then "boot.img" and just hangs there forever. no change. nothing else.
Is there a wireless way to do this? I have purchased Rom Manager but since i can't achieve root it is just useless now. The phone is brand new from the Tmobile store. Not once has it been dropped (to put into perspective how careful i am with my devices, I managed to drop my Vibrant once in ~3 years, which caused no damage, what a great phone that was). I have not been able to read about this same issue anywhere else either...generally its an issue with the PC not recognizing the device but when someone gets it to link up correctly, it works. this is the opposite.
thank you for your ideas so far.
DocHoliday77 said:
May not have any bearing whatsoever here but do you have usb debugging checked? And I think I mentioned it in the other post but try a different computer if possible.
You said that this happens when using odin too? As in you start the flash with Odin but it doesn't complete? Or it wont even start? Does it give you any message?
When plugged in in download mode, does Odin show your COM port in the upper left?
Plug in the phone and open device manager. Does it show any errors or anything?
Click to expand...
Click to collapse
Odin shows the "0:COM" like it should, which means it is able to read that the device is there, it just is unable to do anything after "boot.img", everything that is needed for this to work via the toolkit method is checked (USB debug and unknown sources).

I just got the s3 and had transfer issues too. Turns out my s2 drivers wasn't perfect for it even though it recognizes the device. I used the s3 drivers instead and that helped things a bit with accessing my phone's storage. So i ended up formatting my internal storage and that seems to do the trick for me.
If that doesn't work and odin still gets stuck then try different usb ports also try different wires
Sent from my SGH-T999 using xda app-developers app

Try connecting without the external sdcard in.
What build are you currently on. Since you haven't roited or anything im assuming you're still on either UVALEM or UVALG1. If so try initiating the software update. It should download the ota thatll take you up to UVALH2. Maybe that'll help.
Sent from my SGH-T999 using xda app-developers app

DocHoliday77 said:
Try connecting without the external sdcard in.
What build are you currently on. Since you haven't roited or anything im assuming you're still on either UVALEM or UVALG1. If so try initiating the software update. It should download the ota thatll take you up to UVALH2. Maybe that'll help.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Currently do not have an external SD.
Baseband version T999UVLH2 is what i have running after a fresh phone reset.
Teo032 said:
So i ended up formatting my internal storage and that seems to do the trick for me.
Click to expand...
Click to collapse
Did you do that through terminal? doesn't the single partition mean that it would wipe everything?

Make sure the drivers you are using are the same ones that are in my comment (version).
What are you trying to flash through Odin? If the permissions of the files inside the tar file are not correct, the transfer will hang, and do nothing but give a timeout message after a couple minutes. I learned this the hard way.
In summary:
Use a different USB cable.
Download drivers, Odin, and CWM from my signature. After uninstalling the old drivers manually through devman (be sure to delete them during uninstall), reinstall them from the package you downloaded. Then use Odin to flash CWM. All three of these packages are tested and known to be 100% working. Please don't ignore this step. If I can't verify the validity of your installation sources, I can't rule this out for troubleshooting purposes.
If this doesn't work, it is most likely your computer. Are there any BIOS firmware updates that improve USB compatibility, or USB controller driver updates? The USB 3.0 isn't natively supported on =< Win7, so those are third party drivers. But I will assume you are connected to a USB 2.0 port.

Aerowinder said:
Make sure the drivers you are using are the same ones that are in my comment (version).
What are you trying to flash through Odin? If the permissions of the files inside the tar file are not correct, the transfer will hang, and do nothing but give a timeout message after a couple minutes. I learned this the hard way.
In summary:
Use a different USB cable.
Download drivers, Odin, and CWM from my signature. After uninstalling the old drivers manually through devman (be sure to delete them during uninstall), reinstall them from the package you downloaded. Then use Odin to flash CWM. All three of these packages are tested and known to be 100% working. Please don't ignore this step. If I can't verify the validity of your installation sources, I can't rule this out for troubleshooting purposes.
If this doesn't work, it is most likely your computer. Are there any BIOS firmware updates that improve USB compatibility, or USB controller driver updates? The USB 3.0 isn't natively supported on =< Win7, so those are third party drivers. But I will assume you are connected to a USB 2.0 port.
Click to expand...
Click to collapse
None of that worked. I did find a BIOS upgrade for my mobo that i didnt know was released, flashed it, and transfers still hang. i tried everything from your sig to no avail. i DON'T have access to another computer... BUT i do have Ubutnu running on my comp in conjunction with Win 7 Ultimate 64. can't seem to find too much on non-international S3 stuff for linux.
this has consumed my entire day and i am so frustrated.

Try in safe mode? This sounds really frustrating. I gave up when this happened with my mac. I think someone said it already but I always recommend Airdroid. It's just simpler.

psykhotic said:
Try in safe mode? This sounds really frustrating. I gave up when this happened with my mac. I think someone said it already but I always recommend Airdroid. It's just simpler.
Click to expand...
Click to collapse
airdroid for music transfers, got it. im screwed on the root thing though.

I didn't do it through terminal. I just connect it to the computer. Right click phone's internal storage and clicked format. It was a very quick format.
Sent from my SGH-T999 using xda app-developers app

Teo032 said:
I didn't do it through terminal. I just connect it to the computer. Right click phone's internal storage and clicked format. It was a very quick format.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
so let me get this straight... you plugged the phone in, right clicked on it in a browser window, clicked on format, selected yes to the "hey, this is going to erase everything on the device" warning pop up, and you were able to transfer files no problem after that? no adverse side effects came from this? it sounds like it would brick the phone...

Spaldino said:
so let me get this straight... you plugged the phone in, right clicked on it in a browser window, clicked on format, selected yes to the "hey, this is going to erase everything on the device" warning pop up, and you were able to transfer files no problem after that? no adverse side effects came from this? it sounds like it would brick the phone...
Click to expand...
Click to collapse
Yep that's what i did. That's only the storage partition. There's a system partition that isn't viewable on window explorer
Sent from my SGH-T999 using xda app-developers app

Teo032 said:
Yep that's what i did. That's only the storage partition. There's a system partition that isn't viewable on window explorer
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
didn't work either. i give up. MTP is garbage.

Different computer?
Sent from my SGH-T999 using xda app-developers app

I had these frustrations as well. I finally move where I was connecting the cables. First instinct was the easiest access on my computer. It always failed. I finally decided to try my back usb and it worked it also picked up as a mass storage as well.
Sent from my SGH-T999 using xda app-developers app

Yeah I'm starting to think you might need to use a different computer. Odin detects so it's not drivers.
From my experience with the hangs when i was on the s2. Many also reported this but what helped was different usb ports, wires, or an entirely different computer.
Sent from my SGH-T999 using xda app-developers app

Stuck in boot loop with no USB option

I just inherited a t-mobile phone that was rooted. I installed the latest version of TWRP and tried to re-root it but now it's in a boot loop and on top of that I can't connect the phone to a computer b/c I get the "USB Device Not Recognized" message. I've re-installed the drivers and I've tried the toothpick trick. Nothing is working. What are my options?

jconway1968 said:
I just inherited a t-mobile phone that was rooted. I installed the latest version of TWRP and tried to re-root it but now it's in a boot loop and on top of that I can't connect the phone to a computer b/c I get the "USB Device Not Recognized" message. I've re-installed the drivers and I've tried the toothpick trick. Nothing is working. What are my options?
Click to expand...
Click to collapse
First wrong section...second I'd say flash a different Rom/kernel pair... or redo your recovery from Odin
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

bmg002 said:
First wrong section...second I'd say flash a different Rom/kernel pair... or redo your recovery from Odin
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
First, I believe this is the correct section - the phone I am working with is a T-Mobile Galaxy S II... Second, I can't Odin because I don't have a working usb connection. I've tried several different ROMS from this fine section and I get the same result... Boot Loop

If you flashed TWRP 2.6.3, that's your problem.
Flash 2.6.1

This is the wrong section because it has nothing to do with ROM development.
With that being said if you can still boot into twrp you still have hope. Try loading a different ROM into an SD card using a converter and slide back in the phone to properly wipe first then re flash.
I don't understand why you can't get a proper USB connection going but above suggestion may solve it.
Sent from my SGH-T989 using xda app-developers app

You could always get a SD card reader, connect t to ur PC, DL a flashable twrp 2.6.1.0 and flash the recovery, then flash a ROM an u should be back in action, but above mentioned is right this is the wrong forum u need q&a
Sent from my -T989 using XDA Premium 4 mobile app

jconway1968 said:
First, I believe this is the correct section - the phone I am working with is a T-Mobile Galaxy S II... Second, I can't Odin because I don't have a working usb connection. I've tried several different ROMS from this fine section and I get the same result... Boot Loop
Click to expand...
Click to collapse
Just to confirm a few things: where do you not have the working USB connection? in download mode? If so, I'd try reinstalling the drivers.
Also, I see in your sig that you state your phones are:
Asus Nexus 7
Sprint Galaxy Note 2
Neither of which is a SGH-T989. Are you sure you are flashing the correct ROM/Kernel for your device?
also you said it came rooted but you re-rooted it. What process did you use to re-root it?
One last thing: you say you got it second hand, are you sure it is a T-Mobile galaxy S 2? May want to check under the battery for a "T989" or "i9100". The i9100 is NOT a T-Mobile galaxy S 2. It should be SGH-T989 if they didn't give you incorect info about the phone.
You could also try a different USB cable or hub. I've had USB extension cables give me grief and the front ports on my PC don't like my phone.

bmg002 said:
Just to confirm a few things: where do you not have the working USB connection? in download mode? If so, I'd try reinstalling the drivers.
Also, I see in your sig that you state your phones are:
Asus Nexus 7
Sprint Galaxy Note 2
Neither of which is a SGH-T989. Are you sure you are flashing the correct ROM/Kernel for your device?
also you said it came rooted but you re-rooted it. What process did you use to re-root it?
One last thing: you say you got it second hand, are you sure it is a T-Mobile galaxy S 2? May want to check under the battery for a "T989" or "i9100". The i9100 is NOT a T-Mobile galaxy S 2. It should be SGH-T989 if they didn't give you incorect info about the phone.
You could also try a different USB cable or hub. I've had USB extension cables give me grief and the front ports on my PC don't like my phone.
Click to expand...
Click to collapse
Thanks for your help. Here are the answers to your questions:
I think there is something wrong with the micro USB input on the phone. I have reinstalled the drivers several times. I have tried different cables and different computers. I even tried the toothpick trick. No luck.
I do have a GN2. The SG2 is for my daughter...
It is a genuine SGH-T989 I checked under the battery.

soupysoup said:
You could always get a SD card reader, connect t to ur PC, DL a flashable twrp 2.6.1.0 and flash the recovery, then flash a ROM an u should be back in action, but above mentioned is right this is the wrong forum u need q&a
Sent from my -T989 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Where do I find and how do I put a flashable twrp 2.6.1.0 on my micro sd card? I've always used goomanager in the past but obviously that won't work in this case...

jconway1968 said:
Where do I find and how do I put a flashable twrp 2.6.1.0 on my micro sd card? I've always used goomanager in the past but obviously that won't work in this case...
Click to expand...
Click to collapse
Everything I've found requires a computer connection. I need to be able to flash it back from v2.6.3.1 using TWRP to do it. Is that possible?

soupysoup said:
You could always get a SD card reader, connect t to ur PC, DL a flashable twrp 2.6.1.0 and flash the recovery, then flash a ROM an u should be back in action, but above mentioned is right this is the wrong forum u need q&a
Sent from my -T989 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
One more piece of information that might be helpful... When I try to wipe the cache I get this message "Formatting Data using make_ext4fs function" and it stays stuck there. I've left it for over 30 minutes and it doesn't ever move from that screen. Hope that helps... I really need some help here.

jconway1968 said:
One more piece of information that might be helpful... When I try to wipe the cache I get this message "Formatting Data using make_ext4fs function" and it stays stuck there. I've left it for over 30 minutes and it doesn't ever move from that screen. Hope that helps... I really need some help here.
Click to expand...
Click to collapse
In twrp settings change it to use rm instead of formatting
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

jconway1968 said:
Everything I've found requires a computer connection. I need to be able to flash it back from v2.6.3.1 using TWRP to do it. Is that possible?
Click to expand...
Click to collapse
If u go to the dev section on this phone and look around a bit, u will find the twrp thread, in that thread is a flashabke copy of 2.6.1.0, if u can't find it pm me, I have a copy, all u would need to do is put the zip file on any micro SD card then put it in the phone and flash it with the twrp u have now, it will revert it back to 2.6.1.0 and that should fix ur prob, but like I said of u can't find it pm me and I'll shoot u a copy
Sent from my -T989 using XDA Premium 4 mobile app

soupysoup said:
If u go to the dev section on this phone and look around a bit, u will find the twrp thread, in that thread is a flashabke copy of 2.6.1.0, if u can't find it pm me, I have a copy, all u would need to do is put the zip file on any micro SD card then put it in the phone and flash it with the twrp u have now, it will revert it back to 2.6.1.0 and that should fix ur prob, but like I said of u can't find it pm me and I'll shoot u a copy
Sent from my -T989 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Ok so I Flashed it and now it's stuck on the Blue Teamwin screen???

jconway1968 said:
Ok so I Flashed it and now it's stuck on the Blue Teamwin screen???
Click to expand...
Click to collapse
Let it sit on the TeamWin screen for a minute or so... I find it sometimes takes a little bit.
If it doesn't ever get past there, try hooking it up to a PC and see if you can get ADB to load (presuming you have ADB installed and ADB drivers installed). If you can, try to do an "adb pull /proc/last_kmsg" and a "adb logcat > logcat.txt" and zip those up and toss them on here.
If you CAN'T get into adb, I would try hooking the phone up to Kies and see if it will do anything for you.
Or you could try following this guide as you have the T-Mobile SGH-T989 (not the Telus SGH-T989D):
http://forum.xda-developers.com/showthread.php?t=1513359
BUT make sure to grab the correct stock image file for whatever version your android currently is (ie if you are on Android 2.3.6, then make sure to get the T-mobile KL1 2.3.6 stock image).
Also, what ROM did you flash? was it a 4.3 ROM? If so, did you update your radio before you flashed the ROM? I think 4.1+ needs the updated radio to function properly.
I know you said you can't connect through ODIN, but I'm hoping it is because of some odd driver or odd ODIN version. That thread has the stuff to make it all work I believe.
I'm really hoping you can get ADB to work. If you can pull a logcat of your bootup process, it will be much easier to figure out what went wrong.

bmg002 said:
Let it sit on the TeamWin screen for a minute or so... I find it sometimes takes a little bit.
If it doesn't ever get past there, try hooking it up to a PC and see if you can get ADB to load (presuming you have ADB installed and ADB drivers installed). If you can, try to do an "adb pull /proc/last_kmsg" and a "adb logcat > logcat.txt" and zip those up and toss them on here.
If you CAN'T get into adb, I would try hooking the phone up to Kies and see if it will do anything for you.
Or you could try following this guide as you have the T-Mobile SGH-T989 (not the Telus SGH-T989D):
http://forum.xda-developers.com/showthread.php?t=1513359
BUT make sure to grab the correct stock image file for whatever version your android currently is (ie if you are on Android 2.3.6, then make sure to get the T-mobile KL1 2.3.6 stock image).
Also, what ROM did you flash? was it a 4.3 ROM? If so, did you update your radio before you flashed the ROM? I think 4.1+ needs the updated radio to function properly.
I know you said you can't connect through ODIN, but I'm hoping it is because of some odd driver or odd ODIN version. That thread has the stuff to make it all work I believe.
I'm really hoping you can get ADB to work. If you can pull a logcat of your bootup process, it will be much easier to figure out what went wrong.
Click to expand...
Click to collapse
You guys are great!!! I really appreciate all the help. No matter what I do, ADB, Kies, different cables, different computers, nothing gets past the "USB Device Not Recognized" pop up. I let it sit for 15 minutes, twice. Still no love... I loaded TWRP_2.6.1.0_Hercules and then reboot and that's when it got stuck. Prior to that I had loaded TMobileT989UVMC6RootedDeodexed Rom. I forget where I got it. I'm pretty sure it was a 4.1.2 based rom.

jconway1968 said:
You guys are great!!! I really appreciate all the help. No matter what I do, ADB, Kies, different cables, different computers, nothing gets past the "USB Device Not Recognized" pop up. I let it sit for 15 minutes, twice. Still no love... I loaded TWRP_2.6.1.0_Hercules and then reboot and that's when it got stuck. Prior to that I had loaded TMobileT989UVMC6RootedDeodexed Rom. I forget where I got it. I'm pretty sure it was a 4.1.2 based rom.
Click to expand...
Click to collapse
weird... I am not sure why it is being so fussy with your phone.
Hopefully somebody has a better suggestion than I do, but my next thought is to try ebay-ing the phone in hopes that somebody gives you a few bucks for it. It sounds to me like the internal memory module is dying and the USB port is shot.
Is your water damage sticker pink/red or missing? It should be under the battery.
I hate thinking that the phone is just dead, but without being able to connect it to the PC in either recovery or download mode and not being able to boot into a ROM or recovery, I think the next step is to scrap it and hope somebody can send you a few bucks... or if you have experience soldering, maybe try replacing the USB connector?
I could be wrong mind you... The only time I had issues like that it was due to a badly flashed recovery and I needed to use ODIN to get back up and running. As a thought, do you have a Windows XP 32-bit computer you could try plugging the phone into? And while the phone is plugged in, can you check device manager for all devices? maybe try installing the drivers manually? I suggest windows XP 32bit because that is what I use the majority of the time with my phone. I've also used Windows 7 64-bit and it worked.

bmg002 said:
weird... I am not sure why it is being so fussy with your phone.
Hopefully somebody has a better suggestion than I do, but my next thought is to try ebay-ing the phone in hopes that somebody gives you a few bucks for it. It sounds to me like the internal memory module is dying and the USB port is shot.
Is your water damage sticker pink/red or missing? It should be under the battery.
I hate thinking that the phone is just dead, but without being able to connect it to the PC in either recovery or download mode and not being able to boot into a ROM or recovery, I think the next step is to scrap it and hope somebody can send you a few bucks... or if you have experience soldering, maybe try replacing the USB connector?
I could be wrong mind you... The only time I had issues like that it was due to a badly flashed recovery and I needed to use ODIN to get back up and running. As a thought, do you have a Windows XP 32-bit computer you could try plugging the phone into? And while the phone is plugged in, can you check device manager for all devices? maybe try installing the drivers manually? I suggest windows XP 32bit because that is what I use the majority of the time with my phone. I've also used Windows 7 64-bit and it worked.
Click to expand...
Click to collapse
Thanks again for your time and suggestions... I've always been very impressed with the xda community. I actually got this phone, used, from Swappa. And I am in the process of returning it for a refund. But the seller is being difficult and is trying to stick me with the phone. I was just trying to salvage it on my own, just in case... Thanks again.

jconway1968 said:
Thanks again for your time and suggestions... I've always been very impressed with the xda community. I actually got this phone, used, from Swappa. And I am in the process of returning it for a refund. But the seller is being difficult and is trying to stick me with the phone. I was just trying to salvage it on my own, just in case... Thanks again.
Click to expand...
Click to collapse
that sucks. I've heard good things about Swappa, but living in Canada I can't use it. My opinion it sounds like you got a dud and based on how hard the guy is fighting to not give you a refund, I wouldn't be surprised if he knew it was doa and just fluked out and get it running before he sold it. Or maybe it got water damaged and he knew it would fail soon so he sold it before it completely quit.
I hope you get it all sorted out.
Good luck and sorry I couldn't be more helpful.

bmg002 said:
that sucks. I've heard good things about Swappa, but living in Canada I can't use it. My opinion it sounds like you got a dud and based on how hard the guy is fighting to not give you a refund, I wouldn't be surprised if he knew it was doa and just fluked out and get it running before he sold it. Or maybe it got water damaged and he knew it would fail soon so he sold it before it completely quit.
I hope you get it all sorted out.
Good luck and sorry I couldn't be more helpful.
Click to expand...
Click to collapse
You were great!!! Thanks again...