My keyboard no longer registers the "?" key after I flashed a new ROM when I press it. How can I get it to work again?!
It'll be an error in the rom itself, not a hardware issue.
Maybe check the rom thread for a fix or wait for an update?
-Nipqer
Related
Hey everyone,
I've a problem with my touch Diamond. The Touchscreen doesn't response from any pressure. But the device itself works fine. So first a softreset didn't work out, a hard reset didn't ether. so flased it back to a original rom and. I'm trying to flash to the originel 1.34 spl with this post : http://forum.xda-developers.com/showpost.php?p=2324837&postcount=20 . because i want to send it back, or if someone knows how to solve it keep it ofcource. The device is stuck in the "press on the screen to calibarate". I go to the bootloading menu used the volumedown - reset button. When I flashed the orginel spl it just keep saying 1.40olinex. So how can I get my touchscreen working again or flash back to the original spl.
Btw, sorry for my bad gramma
I've to solve the problem one way or the other, but if they are going to get it monday in this state i've no warrenty.
Hello,
afther an update on my p3600 with an error.
I have only the bootscreen of the rom.
I cant flash any new rom , every time i have connection errors.
is there any chance to correkt the problem or to delet the phone completly?
A Hardreset doesn´t bring anything.
Please help me i cant do anything with my p3600.
take a look:
http://forum.xda-developers.com/showthread.php?t=572747
i read the thread,
but i have tested to update the hard spl but it doesn´t work.
The update software always told me that there is an connection error.
But when i want to install the rom 6.1 manila 2g the software found an connection and start to update but when the software is at 1% the update software told me that the rom is corrupt
This is the reason you should always install HardSPL BEFORE you start flashing any roms at all.
Once you have bricked it, then it is too late to put HardSPL on there.
The whole point of HardSPL is to ensure that you will always be able to get a connection to the device even if you have a broken rom on there.
If the phone is bricked, with no HardSPL on there, your only remaining option would be to try using an unbricking exploit procedure like this:
HTC Trinity Stack Overflow exploit - how to unbrick any Trinity stuck in bootloader!!
^^^ Sorry I have never had to do this myself and have no experience or advice on how to use that exploit utility ... hopefully there is enough help in that thread to get you going again.
Good luck.
EDIT: I thought I'd better just check you do realise that you can get the Tri-colour SPL screen up manually by holding down POWER + CAMERA buttons and 1sec press of STYLUS RESET button. Quickly reading through that splxploit thread I was disturbed to see just how many people didn't even know who to do that
Maybe it's just my paranoia from owning an "i" model but I have never done a single rom flash without first using that 3 button trick to get into SPL screen.
praefke1986 said:
...But when i want to install the rom 6.1 manila 2g the software found an connection and start to update but when the software is at 1% the update software told me that the rom is corrupt
Click to expand...
Click to collapse
Try flashing the Stock ROM that came with your phone. It may get you going again. Can be downloaded from the HTC website.
Sorry If In Wrong Place.
Hi To All Readers,
**** HELP PLEASE ****
I have a Samsung Galaxy W I8150, I downloaded the latest Kies software on my pc, OS. Windows 7 + connected my device + got an option to upgrade to latest version.
I clicked upgrade, followed all the on-screen instructions, by the looks of this matter, it took my old software out, but could not install the New Update on my phone, I even tried the Error connection in troubleshooting menu in Kies, still no joy.
Showing up as device not recognised, I tried this procedure many times, but still same problem.
So I had to unplug my device, but now my device does not boot up, when I switch it on, starts of with a welcome screen: Samsung Galaxy W wonder I8150\ + then a small white box with an yellow arrow pointing towards a green android appears in the middle of the screen.
That is all I keep on getting when I switch my device on, every time.
If I try to plug the charger it stays same except at first a battery image appears in the middle of the screen.
All help appreciated, Thanks
Can you get into download mode? Remove battery then plug it back in.
Then Volume Down + Home + Power.
bajaber said:
Can you get into download mode? Remove battery then plug it back in.
Then Volume Down + Home + Power.
Click to expand...
Click to collapse
Thanks for replying.
Yes I can
Screen Reads:
Warning!!
A custom OS can cause critical problems in phone + installed apps.
If you want to download a custom OS, press the vol up key Otherwise press cancel,
I pressed the up key + it was taking too long to download so I cancelled it, any suggestions???
Thanks
You should take phone to "dowload mode"
look at here
then u should install a rom with "Odin"
you can choose here select your local area
if can't ;
search "how to install a rom in android" via youtube
oh, thank you....i search something on internet 5 hours....sgw was brick and i angry and in this topic a found solution THX
problem with kies
Hello,
I'm getting this error on kies "Your device does not support software upgrading via Kies". I've done some searching around the forums and it seems that changing the CSC resolves this issue.
I'm in saudi arabia and my CSC is KSA which is what it should be but i dont understand why im getting this error on kies?
any help?
Hi!i have same problem and my girlfriend. If u use mac i think dont work.
1-remove kies and install again (If you're still on version 2.3.5, try and install an software update. It should bring it to version 2.3.6)
2-if dont work again try flashing the phone ( and try again kies)
3- if dont work try odin
If i help give me a thanks
tanveer55 said:
Hello,
I'm getting this error on kies "Your device does not support software upgrading via Kies". I've done some searching around the forums and it seems that changing the CSC resolves this issue.
I'm in saudi arabia and my CSC is KSA which is what it should be but i dont understand why im getting this error on kies?
any help?
Click to expand...
Click to collapse
try update via FOTA which is go to
setting>>about phone>>software update>>update (need some registration on this menu)
hope this will help
i tried the OTA update method but i guess there is no update in my region.
Btw ive flashed the custom rom by kezra successfully and it has been working fine till now.
I just want to change the CSC code now because i lost the arabic language support. I dont use it as my default language in the phone but i do receive some messages in arabic and they are unreadable.
I got the same "custom OS" screen just a few minutes ago as niceguy15. I pressed volume down & it booted up normal. Is kies to blame? I've never used it. I have an unrooted Samsung stratosphere.
Hi guys I'm new posting here but can't find the solutions anywhere...
My HTC Desire HD is stuck to boot image ( http://forum.xda-developers.com/showthread.php?t=1673652 ) which I flashed two weeks ago without problems, is mounting the JellyTime R10 rom ( http://forum.xda-developers.com/showthread.php?t=1778202 ) from like a month without any problem since yesterday when I'd travel to a vacation and let the DHD at home to found it back stucked as I'm come back.
The problem is there is no USB Debug, which I searched without finding it when the DHD was ok, the Volume Down is brocken and I'm able to enter the recovery only by attacking the DHD to an energy sources.
Unfortunately when I chose an option like "whipe" for example, it restart immediately and then get stuck.
I've tried to re-flash the recovery but it says "error device not found" so I guess is cause of the USB Debug...
Any ideas ? I like the phone and found nicely from about 2 1/2 years so I' wasn't planning to change it at all :/
I've probably solved the problem.
I've attacked the DHD to the charger in order to enter the recovery and than used the physical buttons (home, menu, back, search ) and not the volume and power button to enter the wipe options. it worked without restarting. I've cleaned the cache and it stopped looping.
Now I'm reinstalling the clockwork and a new 2.3.x rom. hopping it will be really stable unlike the other I've tried.
If someone can please link me a stable rom for my DHD it would be really a nice guy unlike other 74 who read and skipped the question until now !
PROBLEM NOT SOLVED.
I solved only the loop thing, the phone still don't hard resect and is invisible to the computer, may be because if I attack it at a power source it turns on in recovery and then crash, I've unlocked the developers section in the settings and turn on the USB Debug but the phone is still invisible.
I really need help about that, is there any way to solve that problem ? I need to factory resect it to solve the problems.
Can you reflash a recovery from fastboot? Have you tried running a RUU?
bananagranola said:
Can you reflash a recovery from fastboot? Have you tried running a RUU?
Click to expand...
Click to collapse
hi, sorry for the late answer I've lost the hope XD
I bought a note 2 but still REALLY interested in saving my DHD.
Unfortunately I can't access the phone from a pc because if I attach it to the mini usb it immediately turn on in recovery mode, and can't change anything by the recovery mod, it start but it just don't change anything :/
bimbows said:
I've probably solved the problem.
I've attacked the DHD to the charger in order to enter the recovery and than used the physical buttons (home, menu, back, search ) and not the volume and power button to enter the wipe options. it worked without restarting. I've cleaned the cache and it stopped looping.
Now I'm reinstalling the clockwork and a new 2.3.x rom. hopping it will be really stable unlike the other I've tried.
If someone can please link me a stable rom for my DHD it would be really a nice guy unlike other 74 who read and skipped the question until now !
Click to expand...
Click to collapse
I'm running this: http://forum.xda-developers.com/showthread.php?t=840040 (Sense 3.5)
very stable, all working fine
Maybe the USB-Port on the phone is dirty or a metalpiece in it or try another cable
I've searched for this issue for a while but nothing comes up. If i missed it or this post is redundant . I apologize in advance.
Last week, My Sony xperia Z1c screen broke ,so i changed a new one. After that a few hour, I locked phone and when i wake it up, Touch screen wasn't respond. I mean phone is still functional ,you can see new notification coming up, but can't touch anything. Until I hard reset my phone, it was back to normal, touch screen is working, JUST FOR A WHILE. And this issue keep coming back.
I went back to a shop that changed my broken screen in the first place. They changes a new screen for me again, But the issue was still there.
I've no idea what's happens to my phone. Does anybody having a same issue? Please Help me.
Did you try to flash other firmware and check if this still persist?
Madtung said:
I've no idea what's happens to my phone. Does anybody having a same issue? Please Help me.
Click to expand...
Click to collapse
perhaps there needs to be a calibration process after the screen has been installed.
If it were my phone I would try and flash with the latest firmware for your area/provider.
I would recommend IaguCool's thread on Xperia Firmware Downloader & Checker, if you have flashtool installed you can make your own ftf that is exactly right for your phone.