Stuck on HBOOT screen :/, some help please :) - Desire HD Q&A, Help & Troubleshooting

UPDATE TO MY PREVIOUS POST. I HAVE INCLUDED MUCH MORE DETAIL AS TO WHAT IS WRONG NOW. ANY HELP PLEASE?:
I am stuck in HBOOT currently, Ship s-off and of course my phone is rooted. What happened was my battery died sometime on the weekend and i tried turning it on to see the HBOOT screen. None of the buttons were responding when being pressed, not even the Vol. down + Power button was working... It randomly after a day decided to turn back on, then the next day i was at college and my battery went dead again and i'm now back at the HBOOT screen. I should have kept a check on it but i wasn't aware it would happen for a second time. Anyway...
I downloaded the PD98IMG.zip file and placed it on my goldcard (i'm on T-mobile) and attempted to re flash my device via the phone and left it for 6 hours or so whilst sleeping last night as it said it was parsing files. It sat on the same screen for the whole of the time. Tried flashing via my mac with instructions from a previous thread followed everything correct apart from putting into fastboot as i couldn't select it and thought it was worth a shot anyway Anyway, I came back with a message in terminal saying 'sending 'radio' (24960 KB)... FAILED (status malformed (1 bytes))'... As you could see it said failed. quite fed up now after looking for solutions since monday and i was hoping someone could come up with a fix :/.
If anyone knows whats going on with my DHD let me know ASAP. I am 95% sure its not bricked as its charging and turning on to HBOOT.
THANKS!!!!!

have you pulled the battery? thats what I normally do

Have you switched it back on without the charger plugged in?

Well i eventually got it working some how just after i posted this, but now it has just gone off again! It seems to be every time my battery goes completely dead. I plug it in, turn it on and Hboot screen pops up and repeats the same process each time, i dont know how to stop it doing this and i generally don't know how to get it back on.
I tried the ideas suggested but i've tried these previously and tried them again but no luck... One thing now though, my volume down button doesn't respond. If there is no fix i guess i'll just have to watch my battery usage but if anyone can suggest anything i can do to get it straight back on that would be great

I actually really need my phone to work right now , it ain't happening though, its been on hboot all day once again, it happens when the battery runs out, i press the power button and doesn't even vibrate or anything of the sort, just sits there and then pops up with the green writing after like 5 seconds saying:
SD Checking...
No image
Loading... (PD98IMG)
No image or wrong image
It says something like that, its only very briefly though. If anyone knows what i mean.... my phones on t-mobile so i made a goldcard so i could flash some roms, would that have anything to do with it?
THANKS!

Hi,
What info do you see in bootloader.
SHIP S-ON/OFF or ENG S-OFF
And have you performed Radio S-OFF?

andyharney said:
Hi,
What info do you see in bootloader.
SHIP S-ON/OFF or ENG S-OFF
And have you performed Radio S-OFF?
Click to expand...
Click to collapse
Yea i have ship s-off, which is shown. I can't press the volume buttons on the h-boot screen to scroll through menu either just to add... DO you actually have any clue what this may be?

Yeah, you've messed up your handset.
Letting your battery run completely flat will damage your battery. It shouldn't however harm your handset.
What I'd recommend doing, as you already have a goldcard, download the 1.32.405.6 PD98IMG.zip put that on your card and boot into bootloader. Follow the prompts and restore your handset.

Oh my battery is fine, i know for future reference to not let it run completely dry! will that mean i won't have the rom, which i previously flashed? Do i put the PD98IMG file on the goldcard or on my normal sd that i am currently using?

There is something wrong with your phone. When your battery dies your handset shouldn't lock you in HBOOT.
Put the PD98IMG.zip on your goldcard. You will lose everything that is not backed up.
Its your call, stay stuck in HBOOT or try to recovery it.

I'll give it a try and let you know the out come, thabks! By the way, after this wht should i do to get miui back up and running, the sme as what i previously did ?

I'll go for the recovery of course haha... Thanks anyway though, i'll give it a shot and see how it goes down . I'll let you know if i have any success!

How long does it take for it to Parse the package? it automatically started doing it so.
Update: Well I have had this going for quite some time now and its continued to show the following...
Parsing...(SD ZIP)
Bootloader
Boot
Recovery
System
UserData
Splash1
Splash2
TP
TP
TP
TP
Radio_V2
Radio_Cust
Would really appreciate any help ASAP as to why this has just been in the same position for quite some time, obviously something is not right?

Im guessing this isn't very common is it? nobody seems to know what to do

wow.. stuck in the same situation... ive rooted and unlocked my partners DHD from telus... just about a week ago, it just suddenly went to the white HBOOT screen. Since then, ive been able to somehow get into clockwork by pulling the battery out, plugging in the usb cable, then inserting the batter, it would somehow take me to the clockwork mods menu screen. I was using an outdated version tho. I would be able to reboot from that menu which would start regularly booting the phone. One interesting thing tho is that the volume - button stopped working around that time.... Ive been pulling my hair out trying to make a goldcard (did it once, but havent been able to do it since i started trying again) so i can reflash the stock telus ruu. For some reason, the goldcard program im using isnt finding the mm2... just the mm1 and mm0... any ideas why? im formating a 8gb class 4 micro sd card... fat32, ive tried 32 and 64kb sector sizes... any suggestions?

Aidanio said:
How long does it take for it to Parse the package? it automatically started doing it so.
Update: Well I have had this going for quite some time now and its continued to show the following...
Parsing...(SD ZIP)
Bootloader
Boot
Recovery
System
UserData
Splash1
Splash2
TP
TP
TP
TP
Radio_V2
Radio_Cust
Would really appreciate any help ASAP as to why this has just been in the same position for quite some time, obviously something is not right?
Click to expand...
Click to collapse
I´m in the same situation.I think the PD98IMG file don´t match with previously installed ROM (radio,hboot?)...I come from a MIUI ROM,android 2.3.4 version.

I´m proudly to inform you that I did it!
All the thing was (I think) the ROM manager who flashed a wrong recovery.
How I recovered it?
Without adb drivers,without goldcard,without downgrade.
Simply I downloaded a PD98IMG file,I unzipped it and I changed the recovery.img with a 3.0.2.6 recovery version.Ahh,I deleted the radio.img,too(I don´t know if matter or not).After this,I zipped the files again and I renamed the file to PD98IMG.Copy to sdcard,wait to process PD98IMG and finally the power and volume buttons revives!
Good bye!

Related

3 Mobile UK RUU Bricked. Help needed.

Hi guys, Well after trawling through the wealth of information on this site and reading till my eyes bleed I honestly cant seem to fix this.
I was hoping and preying some amazingly talented expert here could maybe point me in the right direction.
Ok so heres whats going on. Got my HTC Desire, Told me there was a system update. So I chose to install ofcourse. Then BAM! for no reason half way through installation the phone dies. Vibrates 7 times and black screen (Searched this too) - nothing.
So pulled battery, waited for a few minutes and put in, power on. Phone gets to HTC (white screen) the freezes. Or even sometimes just switches off and vibrates 7 times again!
So I found An RUU for 3 mobile - RUU_Bravo_H3G_UK_1.22.771.1_Radio_32.36.00.28U_4.06.00.02_2_release_127568_signed
Tried running it with the phone in fastboot usb
All was going well then reached about 80% and gave me an error code 110. Telling me to download a complete RUU for my device.
Now when I power on the screen is just black, however I know it still has some functionality as I can hear the sound for device connection in Windows when I Power on holding down Vol-
now I thought I would be clever and seeing as whilst my phone was working it downloaded the "correct" update. So checked the sd card and found it in the Downloads folder. Renamed it to PB99IMG and tried booting the phone holding down the back key. But still nothing.
By the way the phone isnt rooted and is very very very new. On 3 mobile UK network.
Can anybody please give me some pointers on how I may be able to go about fixing this? Im sure there has to be some way as it still has "some functionalty" (I think lol)
Also tried the adb method of connecting or re-flashing but device is not found.
Cheers all
Sounds like the RUU is corrupt - what is the file size?
Also, is that the one your Desire came with? If not, that won't work anyway
Also, an OTA shouldn't be named PB99IMG as that's only for RUU files - you rename an OTA update.zip and flash it in recovery. Looks like you've not read enough
Hi, thanks for the quick reply.
The RUU I tried installing that failed was from:
http://forum.xda-developers.com/showthread.php?t=695667
RUU_Bravo_H3G_UK_1.22.771.1_Radio_32.36.00.28U_4.06.00.02_2_release_127568_signed.exe
Filesize is 153mb. It matched the version number that my htc shipped with and even says when running the RUU that both versions are the same. But as it failed I tried the Update from my network provider that I found on the SD card by renaming to PB99IMG.zip and holding Back and Power down.
Looks like Im buggered I suppose. Im still trying to get my phones CID as Im guessing then I can install any RUU for my phone?
I just cant access anything to get the CID
The PB99IMG can ONLY be used when extracting it from an RUU
The one you got OTA (Over The Air) isn't a full ROM - it's just a 30MB-odd update
Download the RUU from here:
http://www.4shared.com/get/t2SsuYNF...sionid=2D4E782FB44E2CF020622A15F76C1A5A.dc278
(Shipped-ROMs.com can lead to corrupt downloads)
And then follow the guide I attached to this post - it's how to extract the PB99IMG from an RUU:
http://forum.xda-developers.com/showpost.php?p=10509780&postcount=102
Thank you so much! Will try now and let you know how it goes.
Thanks again
Still no good. Its tricky as I cant see the screen to select the options. But Ive followed the guide allowing it enough time to load before choosing yes etc and still no joy. Im not even sure the PBIMG99.zip is loading.
I've even tried running the RUU again from the PC after Holding vol - and Power down and waiting for the sound in windows that its connected. But gives me error code 110 again saying it cannot read files.
Loos like Im going to have to send it back to my supplier. Although Im sure they will blame me for everything and refuse me a new handset! lol
Once you have the correct PB99IMG file, you copy it onto the root of the SD card (not in any folders) and then turn the phone on holding volume down. You don't have to do anything else as it'll find the file and ask if you want to use it
To try the RUU turn the phone on holding the BACK button to get into FASTBOOT, connect to the PC and when it says FASTBOOT USB on the screen of the phone run the RUU
Out of interest, when you boot into HBOOT when info do you see at the top of screen?
Thats the problem. My screen is blank. I used to be able to get into Hboot and fastboot and see the screen. Now I dont see anything. But Im sure its still going into hboot etc as I hear the connection sound windows makes when holding vol and power.
Hope that makes sense?
Edit. I do know that before all went wrong I had hboot 93 or something like that.
Right, sounds like you've flashed a ROM for an AMOLED Desire onto an SLCD one...
Oh! poooooooh. Well thanks for trying. I never even got to use the stupid thing! lol
There is a thread on here to try and use to sort it out - look through the Q&A section
have u fixed it please ?? I got the same problems now......
thx
SK
vyeshaun said:
Hi guys, Well after trawling through the wealth of information on this site and reading till my eyes bleed I honestly cant seem to fix this.
I was hoping and preying some amazingly talented expert here could maybe point me in the right direction.
Ok so heres whats going on. Got my HTC Desire, Told me there was a system update. So I chose to install ofcourse. Then BAM! for no reason half way through installation the phone dies. Vibrates 7 times and black screen (Searched this too) - nothing.
So pulled battery, waited for a few minutes and put in, power on. Phone gets to HTC (white screen) the freezes. Or even sometimes just switches off and vibrates 7 times again!
So I found An RUU for 3 mobile - RUU_Bravo_H3G_UK_1.22.771.1_Radio_32.36.00.28U_4.06.00.02_2_release_127568_signed
Tried running it with the phone in fastboot usb
All was going well then reached about 80% and gave me an error code 110. Telling me to download a complete RUU for my device.
Now when I power on the screen is just black, however I know it still has some functionality as I can hear the sound for device connection in Windows when I Power on holding down Vol-
now I thought I would be clever and seeing as whilst my phone was working it downloaded the "correct" update. So checked the sd card and found it in the Downloads folder. Renamed it to PB99IMG and tried booting the phone holding down the back key. But still nothing.
By the way the phone isnt rooted and is very very very new. On 3 mobile UK network.
Can anybody please give me some pointers on how I may be able to go about fixing this? Im sure there has to be some way as it still has "some functionalty" (I think lol)
Also tried the adb method of connecting or re-flashing but device is not found.
Cheers all
Click to expand...
Click to collapse
The thread Eddy referred to, was probably this..You should be able to do it even if blindfolded

[Q] HELP: Flashing with S-ON

Hello
First off: I'm not an D Inc user myself (i'm an x10) but I am trying to fix a friends verizon dInc
Second: I have tried searching for hours(plus yesterday) and have not come up with a solution.
My problem: The phone was in a bootloop that was stuck in the HTC Incredible splash screen.
Research/Tried Methods:
- I have tried hboot: it is version .92 and radio is 2.0.15 S-ON
- I have used doug piston's original BP31IMG stock rom on hboot
- Have tried RUU but won't recognize the device at all because i can't really turn the phone on
- Have tried to flash CWM recovery 2.5 and 3.0 but its just stuck on "Checking BP31IMG.zip" using hboot and still nada ( Could i be using the wrong files? )
-hboot problem: Phone finds the BP31IMG.zip checks, parses, and asks me to "Update" --> i press vol+ to yes...
I then see a blue dot on [1]Bootloader then quickly after BLACKSCREEN
The phone doesnt boot after that. I've tried it multiple times but to no avail.
Can anyone please point me to the proper steps.
Thank you very much!
-
From past experience, I know that you can use the RUU in hboot. If you haven't yet, give that a whirl.
just attempted your pointer
But now that i boot into hboot, the setup from where it left off is continuing.
EXCEPT: Radio_V2 FAILED...this doesn't sound good but scared to stop the setup
EDIT: Said Partition Update Failed
Perhaps try pulling the battery and retrying. After just throwing my own phone into hboot, I realized that it was actually fastboot that I meant to say works (first option in hboot). But if not that, I'd say something is fried. Did your friend mess up a radio update because thats a sure way to brick a phone.
Edit: After a little googling, here is something a person with a desire said fixed it for them.
http://forum.xda-developers.com/showthread.php?t=767749
KyleBS said:
Perhaps try pulling the battery and retrying. After just throwing my own phone into hboot, I realized that it was actually fastboot that I meant to say works (first option in hboot). But if not that, I'd say something is fried. Did your friend mess up a radio update because thats a sure way to brick a phone.
Edit: After a little googling, here is something a person with a desire said fixed it for them.
http://forum.xda-developers.com/showthread.php?t=767749
Click to expand...
Click to collapse
That won't work fastboot option only allow you to reboot on the Dinc...Make sure that the Pb31Img is @176mb and it should ask you to update after it reads the file
yup im sure its @176MB from doug pistons site
it did ask me to update..everything worked except radio_v2 which failed
rendering the whole update a fail
and now it wont even boot hboot :'(

[Q] Unique problem(Stuck at splash screen.Cannot get into recovery mode, only Hboot

I thought I had it all figured. Root, with Clockwork Recovery, Rom Manager. Nothing could go wrong. Now I am stuck at the splash screen with no Clockwork Recovery.
I searched fourum after forum to find a solution, but mine seems to be different. Just so you know I am 21, and a freelance computer technician so I am not afraid of the command line
What have I done to my device:
=Originally it had 2.1
=I rooted the phone via exploid method
=I installed CyanogenMod 6.1.1
+My computer only recognized my phone in HBoot mode, I think usb debugging is turned off though because I cannot acces my sd while it is in my phone.
I do have a microsd card reader
+I tried Esprimg.zip updates. It works .but I still cannot get into recovery mode.
For extra precaution, I backed up all of my sd card data on my pc.
Symptoms and problems:
+I am stuck at the white My tough slide 3g splash screen.
Holding up and power for at least 30 seconds does not get me in recovery mode. All I see is the white My tough slide 3g splash screen. No Black screen with a triangle(Biggest Problem)
+Holding down and power does get me into the HBoot.
+The recovery option will make the Mytouch slide reboot, but it will freeze at the splash screen.
+The clear storage option executed, but it did not solve my problems.
+I have also removed the battery, sim, and sd card.
Summuaray-
I need to get Into Recovery mode, but when I press up and power it does not work. I only see a white.I never though there would be a day where I could not get into recovery.
Also, I constantly charge the device so it wont turn off during an update.
Do you have S-OFF? If you do it should not be hard to recover.
If you don't I can't think of any other method now. But just to make sure which Esprimg.zip method did you tried? Because that should work in the first place.
Mine says S-On
Esprimg.zip
I used my microsd card reader to put esprimg.zip on the sd card. Boot the device while holding down and power. I let the phone check for the esprimg.zip and then the update was successful.
Conclusion:
I hold up and power and i cannot access recovery mode.
Possible causes:
By doing the clear storage, would that change my device to s-on. Honestly I never noticed s-on until now. However, I was able to root and get clockword mod 6.1.1 and it ran smoothly for a weeks.
darko4 said:
By doing the clear storage, would that change my device to s-on.
Click to expand...
Click to collapse
No. Only by flashing another bootloader will you get S-ON back. You probably did not have S-OFF before anyways but FYI Esprimg.zip does flash the bootloader so you're stuck on S-ON for now.
If the Esprimg.zip update method was successful it should have flashed back the stock recovery for you. I can't think of anything that could go wrong at this point except that u have a bad or corrupted Esprimg.zip. Did you use the champion build or the ENG build? If me I'd try to download it again and give it another go.
Good luck!
Ok so Esprimg.zip may be bad, and pretty much that is my only saviour;ok I understand.
I was using Esprimg.zip from other guides. Those were 137 mb
This time I used the one from here.
HOW-TO * Flash the Eng-Release to the Slide *6/15/2010
http://forum.xda-developers.com/showthread.php?t=703076
I am going to assume this the the eng build. It was 137.1 mb.
If this does not work the I guess I have to go champion build.
------------------------------------------------------------------
Failed
Champion build esprimg.zip is next.
A few more ideas.
manually install the recovery using fastboot.
troubleshooting without simcard?
My spl s-on so would that be possible?
Is there a way to maybe re root?
I read in one post that a guy sold it on ebay..i would hate to do that with just a month of ownership. would Htc make a warranty request even though I bought it used. Besides you only see bootloader and hboot spl s-on so how could they tell?
So you reach the screen where it asked you whether you want to install the update, you choose "yes" and it goes on to flash everything, radio, bootloader, yada yada, and it fails to boot?
Basically with S-OFF you can boot into fastboot and run
fastboot flash recovery recovery.img
in this case recovery img is CWM recovery. With S-ON fastboot flash is disable so it's not possible.
EDIT: If you do have the champion build on it's basically stock.
I have this exact same issue right now, I've tried the champion and engineering builds of ESPRIMG but with no success. I can't think of anything else that would be causing this in the first place, which is making it so difficult to troubleshoot. The only difference is that I was using CM7 instead of 6, but the exact same thing is going on. I have tried everything that the OP has with no luck. The only possible cause I can think of is that something was somehow corrupted while the phone was on and sitting on my table...because when I picked it back up, it was off and when I tried to boot, I got splash screen... Any other ideas?? I'm all out and just sitting here waiting for some genius light bulb to go off....attic's kinda dusty though..
With S-ON fastboot flash is disable so it's not possible.
So basically these are my options
esprimg.zip (if that does not work then use different)
Hboot clear memory,
with S-ON I have limited option
and keep it charged.
Although with fastboot and s-on is there something I could do?
Would rerooting be an option
darko4 said:
Would rerooting be an option
Click to expand...
Click to collapse
I don't see a root method in the forum that does not involve booting into a usable system.
Wait, you guys were able to flash the esprimg.zip right? Because in the guide when it says it requires root it's for flashing the mtd0.img first before rebooting into HBoot. Since you don't have a working system you cannot do that and if HBoot refuse to take your esprimg.zip then you need to do the Goldcard method. Otherwise I don't see why having root will make a difference.
So at this stage of the game I should do this..
1.get on my knees
2.put my hands together.
3.and just pray?
ok all jokes aside. Continue to try Esprimg.zip and update(all are successful but I still get splash)
I can't change my recovery since I have s-on
and no way of getting s off since i cant get in the phone, not even recovery,just h boot
So in a sense i have a lovely soft bricked mytouch 3g slide.
Later I might compose a list of the programs i had on the device, but i doubt that would make a difference. I appreciate the help and assistance, I am going to click the thank button for you gents.
In the mean while i got a tmobile comet for 136 one day shipping..No rooting on this one cause finals are coming and I do not have time to troubleshoot for hours. I love android cause of custom roms, but not being able to get in recovery mode...ah say no more. I am going to be one of those people who just downloads free software and complain to phone carriers about OTA.
Same here. I held off rooting and all until my exams were over because I know I'm going to go all the way until I get S-OFF.
I know many discourage S-OFF because it can potentially brick during the process but if you do read up and follow instructions very carefully it is really not that risky. And it'll be very useful in situations like this.
I'm sorry to hear you have a soft-brick. Maybe a dev will stumble upon and provides new insights but I afraid this is all we have in the forum for now.
to be honest i skimmed through the post, and im sure you did try this but just want to ask have you tried the official RUU update to see if you can get things back up running that way?
yeah I understand following directions carefully, but when you follow all of directions and get it working,and make backups, but then you turn the phone off and then turn it on. Then all of this happens.
ah let me stop my whining and download more esprimg.zip .
I just want to know what caused it. was it an application, cause if that is the case then I want to know so no one else get hurt.
(one interesting note, avg antivirus said my device was infected with viruses. It said with the apps, I did not clean it. i uninstalled avg. I presumed it was a false alarm cause the phone is rooted with applications with high privileged) Oh well
---------------------------------------------------------------------------------------------------------------------------------------------------
oh well. back to the esprimg.zip
never tried RUU, if it comes in a esprimg.zip then i guess i can try. if not then i do not know how to use it with mine in its current state
S on (so no advanced fast boot options
Hboot only
no recovery.
clear memory
only productive thing is successful esprimg.zip updates
its the official update to froyo, and need HTCsync and the RUU from htc how the installs procces goes i dont really know, but im sure there is a RUU update that you can use to update via bootloader,
ok i got htc sync
and the official exe.
my pc only detects the device in hboot. The device will read usb hboot.
1 might fiddle around for 20 mins to see whats what.
.
If it was like a esmprimg.zip then it would seem more feasible.
goood luck hope you get your phone back up and running
well a week ago it finally booted. I felt that it was a fluke so I pressed the power button to reboot. I tried to turn it back on then it was stuck at the splash screen.
I am now starting to think it is a hardware problem. Either way the unrooted tmobile comet,yes it is small, is doing wonders. The battery life is way better then a iphone 3g.
Just remember guys, if you get an android phone, make sure it is a popular one. That way you are more likely to get support because of the bigger fan base. Oh well it was fun while it lasted. The only thing I hate is that i could have gotten an xbox 360 for the same price. oh well, thanks for the assistance. i will lets you know any further updates.

[Q] [HELP] Desire messed up after alpharev

Hi there,
I had a very nice trip with my rooted desire with a miui rom on it for now maybe, 1 year smthg.
Recently, i bought a new µSD and wanted to prepare it for my phone ; i downloaded rom manager, and tried the "partition SD" functionality, which told me that i would have to update my clockworkmod, which i tried with the "update recovery" in it, which failed.
After a while, i found that i forgot to S-OFF my phone, and that was the reason why i couldn't update the recovery. So i decided to S-OFF. Unfortunately, my phone didn't went to the last step, and stayed stuck at the boot screen until its battery died, maybe an hour after.
I began a long journey trying to figure out if my phone was bricked or not, since i wasn't able to boot it up ; only the hboot was responding. I tried MANY ways, MANY posts, i tried to flash with a nand backup without success ('access denied'), i tried to flash just the recovery (same or 'signature failed'). I tried to put a PB99IMG.zip file from alpharev into my phone without any success...
BUT. I succeed in recovering my phone with putting a stock PB99IMG.zip from shipped-roms and it boots up very well on a crappy sense rom.
From that, i tried hard to root it again since i want to try again to S-OFF it, and after that, return back to my beloved miui rom. I'm stuck because of a mysterious problem into my phone. It looks like it doesn't like the third step which (i guess) requires a boot script. So nothing happens to it, it freezes to the bootscreen, while unrevoked says "waiting for reboot..." endlessly.
I succeeded once (only) in passing this step, but then unrevoked said to me something like : "Internal error: failed to unlock NAND flash?" which seems crazy since i'm in a 0.93 HBOOT (since the RUU reset). I hadn't any Superuser app nor signs of rooting ("su" command failed in terminal).
For now, i'm trying to root it via the Visionary app, but i don't think it will work.
If anyone has any suggestion in making things better, i'll be pleased to hear !
PS : I'm writing this post because i feel it could be full of useful infos for anyone else stuck with a "bricked" phone.
use this guide to S-OFF, install custom recovery and root.
read all the instructions, several times.
oh and rom manager is often not recommended for this phone as it can often cause usb bricks. once s-off you can flash different recoveries via fastboot or android flasher.
use gparted or 4EXT recovery to partition your sd card.
Unfortunately, it seems like the time for me to change phone has come.
While i was doing an other time a RUU reset because of loopboot created by an unrevoked related bug, my phone decided to stop, and die. The battery is still charged — i can feel the fuzz with putting my tongue on it — but the phone just doesn't turn on ; it doesn't show the charging led when i put it on charge...
I'm currently looking for an other device, such as the Desire S (because of the size, mainly ; others blockbusters are too big)
If someone has an idea to make my Desire turn on again, anything i can do, i will do.
Thx for the answer, the guide link, and all !
ynk said:
Unfortunately, it seems like the time for me to change phone has come.
While i was doing an other time a RUU reset because of loopboot created by an unrevoked related bug, my phone decided to stop, and die. The battery is still charged — i can feel the fuzz with putting my tongue on it — but the phone just doesn't turn on ; it doesn't show the charging led when i put it on charge...
I'm currently looking for an other device, such as the Desire S (because of the size, mainly ; others blockbusters are too big)
If someone has an idea to make my Desire turn on again, anything i can do, i will do.
Thx for the answer, the guide link, and all !
Click to expand...
Click to collapse
don't just go flashing RUU's randomly, you may get amoled/slcd incompatibility for instance, which is what this might be.
try reading the troubleshooting guide, you can probably save your phone.
read carefully before you do anything in future...this situation could probably have been avoided
Thanks a lot again
I should be more patient when trying to do things, but it's kinda annoying not to have it working...
Btw, i wasn't acting *that* randomly (at least, for me) : since anytime i was using unrevoked was blocking the phone onto the boot screen, the only way i found to restore it was flashing it again. But yeah, maybe it was done too randomly though...
The guide you gave me is full of good advices, but the only thing that could be matching for my case is a bad RUU flashing ; this doesnt look to be my case, since even if i put my phone on charge, the charging led doesn't turn on. The phone doesn't warm after pressing the power button... It looks like there's something related to electricity inside that have been broken somewhere... Don't you think so ?
[EDIT] I found some guys having my (new) problem here : http://www.htcdesireforum.com/htc-d...h-on-or-respond-to-a-charger-what's-happened/ I'm quite relax since it's not a "0day" problem : lots of people are talking about it, so i have some solutions : wait and pray, if not, try another battery, or let it dead.
ynk said:
Thanks a lot again
I should be more patient when trying to do things, but it's kinda annoying not to have it working...
Btw, i wasn't acting *that* randomly (at least, for me) : since anytime i was using unrevoked was blocking the phone onto the boot screen, the only way i found to restore it was flashing it again. But yeah, maybe it was done too randomly though...
The guide you gave me is full of good advices, but the only thing that could be matching for my case is a bad RUU flashing ; this doesnt look to be my case, since even if i put my phone on charge, the charging led doesn't turn on. The phone doesn't warm after pressing the power button... It looks like there's something related to electricity inside that have been broken somewhere... Don't you think so ?
[EDIT] I found some guys having my (new) problem here : http://www.htcdesireforum.com/htc-d...h-on-or-respond-to-a-charger-what's-happened/ I'm quite relax since it's not a "0day" problem : lots of people are talking about it, so i have some solutions : wait and pray, if not, try another battery, or let it dead.
Click to expand...
Click to collapse
that problem sounds different as that was posted ages ago, and they weren't messing around with rooting and RUUs...
i don't think you should 'wait and pray, try another battery, or let it dead'
can you get to recovery/bootloader/fastboot at all? please post more details. if you can then it's probably not bricked.
i'm unsure of whether you've actually tried anything in the troubleshooting guide. try [2] advanced boot problems, S-ON. create a goldcard and try the WWE RUU
if none of it makes sense ask directly in that thread
and if you get the RUU to boot, don't use unrevoked...follow my 1st reply...
I stopped all the things i was doing when i had your reply, trust me !
As i said, i can't get the device to be powered on ; since, i'm not able to have any access to hboot, fastboot, nor adb. The phone does not charge when plugged to a charger neither to a computer. The led stays black, and the battery doesn't get warm (which normally does when charging).
Since the phone doesn't turn on, the guide you gave me is useless (but i learnt a lot from it, so thanks for that). The only section which *could* have been useful was the one talking about wrong RUU flashing with SLCD off ; but since my screen was working, and the symptoms are different (my phone is not recognized by the computer), this is not describing my problem definitly.
Be sure that if i can boot that phone once again, i'll follow your 1st reply and won't use unrevoked on it ever...
I'm trying now to find an other battery, to know which from the battery xor the mobo of the phone is dead. If battery, i'll just buy a new one ; if mobo, i'll buy a Desire S, since my phone reached the warranty limit, and i would have to pay to repair it...

[Q] Boot loop? Help

Ok, so I have an old droid incredible that has not been used in years, I charged it up and when I turned it on, all it would show is the droid incredible logo and it will vibrate, then turn on and repeat.
On hboot it states this
IncredibleC XC SHIP S-ON
HBOOT -0.92
and some other stuff
Ive tried doing recovery, clear storage, factory reset, but they all lead to the same loop again as if nothing happened.
I have also tried installing some other recoveries but all that happens is that it states something like wrong name or not found (something like that)
Anyways, Im like 80% sure that this phone worked before it was sent to sleep till I decided to use it again.
And im 100% sure that this phone was completely stock, no root, nada, probably one of the most squeaky clean phones, at least I hoped it was. Its my bro's and he doesn't root any of his android devices.
sasdas said:
Ok, so I have an old droid incredible that has not been used in years, I charged it up and when I turned it on, all it would show is the droid incredible logo and it will vibrate, then turn on and repeat.
On hboot it states this
IncredibleC XC SHIP S-ON
HBOOT -0.92
and some other stuff
Ive tried doing recovery, clear storage, factory reset, but they all lead to the same loop again as if nothing happened.
I have also tried installing some other recoveries but all that happens is that it states something like wrong name or not found (something like that)
Anyways, Im like 80% sure that this phone worked before it was sent to sleep till I decided to use it again.
And im 100% sure that this phone was completely stock, no root, nada, probably one of the most squeaky clean phones, at least I hoped it was. Its my bro's and he doesn't root any of his android devices.
Click to expand...
Click to collapse
Do an ruu thru hboot. Download this file http://dinc.does-it.net/Stock_Images/4.08.605.15/PB31IMG.zip, and place it on your sdcard in no folders named exactly how it is (PB31IMG.zip). Boot to hboot, wait a few secs and it should find the file, parse it, and then prompt you to press vol up to install. Once done it will prompt you to press vol up to reboot. If hboot says it cant find the file, you may need to reformat your sdcard fat32 with a pc and then try again.
Ok, so it seemed to had found it, and a bar on the right appear and it said loading, but once that was done, it would state checking that zip, and then it just showed the hboot screen again.
sasdas said:
Ok, so it seemed to had found it, and a bar on the right appear and it said loading, but once that was done, it just showed the hboot screen again.
Click to expand...
Click to collapse
What radio (baseband) version does it say in hboot? Try this one http://dinc.does-it.net/Stock_Images/4.08.605.2/PB31IMG.zip.
cmlusco said:
What radio (baseband) version does it say in hboot? Try this one http://dinc.does-it.net/Stock_Images/4.08.605.2/PB31IMG.zip.
Click to expand...
Click to collapse
This one didnt do anything, stating something like not found, but im unable to reformat the card again since its late now, the previous one worked I believed because I reformat it before I even tried it.
Anyways, the radio states
RADIO-2.15.10.07.07
sasdas said:
This one didnt do anything, stating something like not found, but im unable to reformat the card again since its late now, the previous one worked I believed because I reformat it before I even tried it.
Anyways, the radio states
RADIO-2.15.10.07.07
Click to expand...
Click to collapse
sorry for double posting, anyways it turned on and it was loading and everything, it even showed the lockscreen, and just as I was about to unlock it, it went back to boot loop.

Categories

Resources