Related
my UNI after uproom can not start.it only can perform 02 picture.so my UNI now can not be use.i tried to up many different room but it can not active.i hope everybody can held me solve this problem.thanks so much.hope to receive your reply
bestboytq said:
my UNI after uproom can not start.it only can perform 02 picture.so my UNI now can not be use.i tried to up many different room but it can not active.i hope everybody can held me solve this problem.thanks so much.hope to receive your reply
Click to expand...
Click to collapse
Ở HN có dịch vụ thay Disk.On.Chip đó bestboytq, trên này cũng bó tay thôi, chia buồn ***g bạn, con chip đó khoảng 12$. Xem lại trong topic ở MF đi, có người cho địa chỉ đó, nếu ở HCM thì dễ rồi.
Hê hê ! nó là người nước ngoài chứ đâu phải là người việt mà bạn trả lời tiếng việt ! chắc nó đang đi kiếm người phiên dịch đó !
Search and you shall find:
FOR ALL THOSE WHO STUCK IN THE BOOT SCREEN OF UNIVERSAL
(full) http://forum.xda-developers.com/showthread.php?t=259003
(mobile) http://forum.xda-developers.com/archive/index.php/t-259003.html
The MTTY tool enables you to determine whether your internal flashdisk is defective. Once that is confirmed you are out of luck, the device will have to be repaired by the manufacturer.
Have u tried to upgrade through bootloader mode
bac shinechi that la dinh cao.minh tham gia ben MF nhung dao nay MF ko vao dc nen mo len day nho cac chuyen gia giup do,nhung co le cung bo tay roi.minh o HN,bac biet co cho nao thay D-o-C uy tin va chat luong thi chi cho a e voi.thanks
i am sorry everybody,i do not know what is "mtty" i can not find it.if someone know please tell me and held me how to use it.thanks
bestboytq said:
i am sorry everybody,i do not know what is "mtty" i can not find it.if someone know please tell me and held me how to use it.thanks
Click to expand...
Click to collapse
I have attached the program for you.
instructions:
-disconnect USB cable
-disable USB connection in desktop ActiveSync
-connect USB cable
-start mtty
-create new connection and select USB from ports
press enter to see USB prompt in mtty:
USB>
type (dont copy&paste):
task 28
and press enter
If the result is the following then you are out of luck:
flFormatPhysicalDrive:status=23
DOC_format failed!
BTW just for my knowledge i would also like to know wat this mtty is ?
niketkumar said:
BTW just for my knowledge i would also like to know wat this mtty is ?
Click to expand...
Click to collapse
Google, and thou shalt find ..
MTTY is some kind of terminal emulation software, and in this case it is used to communicate to serial and/or USB enabled devices. On the HTC devices (including the Universal) it enables you to issue a selection of commands that allow you to read the status of som eof the components, to clear the bootloader flags, to format the internal flashdisk etc etc
(This program should of course be used with precautions)
In this particular case, the task 28 command issues a format command to the internal DOC=DiskOnChip that hosts the operating system after initialization. When performing a hard reset, so either selecting clear storage/1234 or reset+softkeys/clear storage, the internal flash disk is reinitialized, reformatted, and the OS is put back on the internal flash disk, thus preparing the device for its first use.
The behaviour above indicates a defective internal flash disk, and the task 28 command verifies that. If the result is "format failed" then there is no other solution then to send the device back to qtek/o2/htc etc...
have u ever tried to do with your method.your solution is very good,but can you show me more carefully.thanks so much
Wiz said:
Google, and thou shalt find ..
MTTY is some kind of terminal emulation software, and in this case it is used to communicate to serial and/or USB enabled devices. On the HTC devices (including the Universal) it enables you to issue a selection of commands that allow you to read the status of som eof the components, to clear the bootloader flags, to format the internal flashdisk etc etc
(This program should of course be used with precautions)
In this particular case, the task 28 command issues a format command to the internal DOC=DiskOnChip that hosts the operating system after initialization. When performing a hard reset, so either selecting clear storage/1234 or reset+softkeys/clear storage, the internal flash disk is reinitialized, reformatted, and the OS is put back on the internal flash disk, thus preparing the device for its first use.
The behaviour above indicates a defective internal flash disk, and the task 28 command verifies that. If the result is "format failed" then there is no other solution then to send the device back to qtek/o2/htc etc...
Click to expand...
Click to collapse
Thanx for the info.
stuck
dude i also had the same problem. my phone was working perfectly fine. i dont kno what tickeled my ass nd i tried upgrading the radio with the original club-imate rom upgrade file. upgrade was successful but when i tried the hard reset thing i got stuck at the blue color booting screen nd now ma phone is not completing the boot. i have a jasjar. as mentioned in this forum i downloaded the mtty utility nd tried running task 28. unfortunately the result is "format failed". as per niketkumar my phone is ****ed now. niket do i have some other remedy bro rather than going to the workshop. my exams are goingon nd the workshop here is in new delhi which is aroound 600 miles from jodhpur where m studying presently. is there any other way out. do u have ne idea as to what would this fixing up cost me coz my phone is outa warranty period nd its a second hand one. with my figers crossed m waiting 4 a reply.................................
hitesh8263 said:
dude i also had the same problem. my phone was working perfectly fine. i dont kno what tickeled my ass nd i tried upgrading the radio with the original club-imate rom upgrade file. upgrade was successful but when i tried the hard reset thing i got stuck at the blue color booting screen nd now ma phone is not completing the boot. i have a jasjar. as mentioned in this forum i downloaded the mtty utility nd tried running task 28. unfortunately the result is "format failed". as per niketkumar my phone is ****ed now. niket do i have some other remedy bro rather than going to the workshop. my exams are goingon nd the workshop here is in new delhi which is aroound 600 miles from jodhpur where m studying presently. is there any other way out. do u have ne idea as to what would this fixing up cost me coz my phone is outa warranty period nd its a second hand one. with my figers crossed m waiting 4 a reply.................................
Click to expand...
Click to collapse
Dont worry at all try to reflash it back with the complete ROM upgrade and if it is not detected by ur comp. then try it in the Bootloader mode .
niket
niket, i have tried it several times brother. i have upgraded/reflashed the rom version available at the clubimate site several times but the results are same. no success. i have done it in the bootloader mode only. my bootloader update has been successful. it shows that v1.01 has bee uploaded to my device. when i reflash the rom it every time stucks at the blue color boot screen and then there is no change. as suggested in the forum i had downloaded the mtty utility software and ran task 28. it shows document format error or some crap like that. according to the forum participants my device has a corrupted flash card and i need to get it fixed. in india we have the service center at delhi nd when i told them about ma problem they have also suggeted me to get it changed sice it is corrupted nd of no use now. they say that no matter how many times i run the upgrade now it wont help me. they gave the following reason:
since the flash card is corrupted, though the upgrade will be successful as the whole flash card is overwitten but when i will boot my device the boot files wont be read by my device bcoz of corrupt flash card and hence the device wont boot my os. they say its a hardware problem nd the sofwares have nothing to do with it.
if you have a remedy for me then plz do reply. is it possible to fix the card by formatting it and if yes then how to run the format on internal flash drive.
m badly stuck man. if nuthin works i will get it replaced this sunday i.e. 12/11/06.
hitesh8263 said:
though the upgrade will be successful as the whole flash card is overwitten but when i will boot my device the boot files wont be read by my device bcoz of corrupt flash card and hence the device wont boot my os. they say its a hardware problem nd the sofwares have nothing to do with it.
if you have a remedy for me then plz do reply. is it possible to fix the card by formatting it and if yes then how to run the format on internal flash drive.
m badly stuck man. if nuthin works i will get it replaced this sunday i.e. 12/11/06.
Click to expand...
Click to collapse
Sorry, the internal DiskOnChip is divided in three parts, the part where the rom goes, the part where extended_rom goes and the part where your operating system will end up for first use. It is that last part that has become corrupted. You can flash perfectly to area 1 and 2, but it is area 3 that you will ultimately need. That 3rd area is what is initialized when you select clear storage or press the two soft keys+reset.
Since the error code is format failed, there is no solution but to send it back to the manufacturer of supplier ...
hitesh8263 said:
if nuthin works i will get it replaced this sunday i.e. 12/11/06.
Click to expand...
Click to collapse
So wats the news ? Got it fixed , How much did it cost to u ?
Wiz said:
I have attached the program for you.
instructions:
-disconnect USB cable
-disable USB connection in desktop ActiveSync
-connect USB cable
-start mtty
-create new connection and select USB from ports
press enter to see USB prompt in mtty:
USB>
type (dont copy&paste):
task 28
and press enter
If the result is the following then you are out of luck:
flFormatPhysicalDrive:status=23
DOC_format failed!
Click to expand...
Click to collapse
i had the result below
:
flFormatPhysicalDrive:status=23
DOC_format failed!
what should i do ???
Wiz said:
Sorry, the internal DiskOnChip is divided in three parts, the part where the rom goes, the part where extended_rom goes and the part where your operating system will end up for first use. It is that last part that has become corrupted. You can flash perfectly to area 1 and 2, but it is area 3 that you will ultimately need. That 3rd area is what is initialized when you select clear storage or press the two soft keys+reset.
Since the error code is format failed, there is no solution but to send it back to the manufacturer of supplier ...
Click to expand...
Click to collapse
When I issue the task 28 command the format is successful but I am still stuck at the splashscreen.
Wiz said:
I have attached the program for you.
instructions:
-disconnect USB cable
-disable USB connection in desktop ActiveSync
-connect USB cable
-start mtty
-create new connection and select USB from ports
press enter to see USB prompt in mtty:
USB>
type (dont copy&paste):
task 28
and press enter
If the result is the following then you are out of luck:
flFormatPhysicalDrive:status=23
DOC_format failed!
Click to expand...
Click to collapse
hey sorry to bump an old topic.
Im trying to troubleshoot / fix my Harrier (and my PDA2k is playing up as well ffs) and I'm having problems following these instructions.
I open up mtty, but there doesnt seem to be any option to select USB as a connection. There is only COM1 and COM2 ports.
Where do i go from here?
im using v1.42 on WinXP pro.
The screen alignment problem comes back this morning to my HTC Tytn.
It hangs on the calibration screen. Nothing helps...scratching...itching etc.
Now i must flash back to WM5 to change the device at Vodafone Germany. Can i make this with the official file from the vodafone germany website?
At this moment on my Tytn is:
The new Shaps WM6 ROM (German, FULL Version from 28.07.2007)
Radio 1.48
Olipro 2.10
Or did i have to work with any ROM Kitchen? I have read the instructions on MrVanx site and other people says that i only have to flash the original Vodafone update file from the website.
sorry for my terrible english...
I hope you understand what i want....
I also have sceen alignment issues using Schaps WWE ROM. I had mine in for service earlier and do not believe it is hardware related this time, as some WM6 roms seem to give me the problem occasionally (I've tried them all..). I have no problems using Jasjammings black roms, so what it may be beats me... Hopefully there will be a fix.
EDIT... I've done a new flash with the latest Schap ROM, I believe it is better than the one I tried before. I tried Sleuth's as well, but it was too giving me alignment issues. The new ROM seems good so far.
Trieoner said:
The screen alignment problem comes back this morning to my HTC Tytn.
It hangs on the calibration screen. Nothing helps...scratching...itching etc.
Now i must flash back to WM5 to change the device at Vodafone Germany. Can i make this with the official file from the vodafone germany website?
Click to expand...
Click to collapse
I might be wrong but wasn't the screen alignment issue the alignment changing after being set due to problems in hardware with the screen itself?
This sounds like a software fault only that a new ROM would probably fix. (or was the problem that something presses on the screen which stops it calibrating?)
(i never suffered it so havent looked into it)
sambartle said:
I might be wrong but wasn't the screen alignment issue the alignment changing after being set due to problems in hardware with the screen itself?
This sounds like a software fault only that a new ROM would probably fix. (or was the problem that something presses on the screen which stops it calibrating?)
(i never suffered it so havent looked into it)
Click to expand...
Click to collapse
I had a terrible screen alignment issue on my Wizard. It is a hardware failure.
As for the OP's question on downgrading, check out MRVANX's AWESOME GUIDE.
Many thnks 4 the support!
Many thanks todd_jg! This is what i am searching for. I have found another guide but this was i found where an old version of this.
Many many thanks. I will try this guide on weekend.
BTW: Its my third Tytn from Vodafone, the screen alignment problem is definitly a hardware bug as HTC official related in February this year.
Next problem....damn
Ok. the flashing of the original Vodafone Germany ROM is fullfilled! It works...
BUT:
Now i am sticking in the first calibration screen after the first boot (after flashing)!
Because my Tytn has a calibration problem i am unable to do the first calibration to get in the next step of setting up Win Mobile 6 (time and date i think).
AND:
In the (perfect!!!) guide posted above there is an extra guide to downgrade the spl.
But thru the sticking in the first calibration screen i am unable to downgrade cause the update (downgrade is the better name i think) says not connected to device.
Does anybody have an idea to solve this tricky problem?
BTW: changing the device at vodafone i have to wait 17 work days because they have a little delivery problem. I think they dont have any device thats work probaly.... But I can wait.
I hope you understand what i want...sorry i come from Germany...
Have you tried waiting a while for the calibration screen. Sometimes after a new ROM has loaded, it seems to take a while to get the screen to respond to the calibration.
Also, you should be able to do the SPL downgrade as it is explained in Mrvanx guide, except you can start in bootloader mode, instead of starting with the phone on.
Und, dein Englisch ist echt gut. Ueberhaupt keine Probleme dich zu verstehen
I have waiting a very long time after the first boot. Because i have to think about what i do now.
And i have pressed all buttons on the phone and i have punished it for a while cause i am a little bit angry about this sh!t. Nothing helps.
In bootloader mode the downgrade says that there will be a problem with getting contact with the device.
Hier nochmal auf deutsch:
Ich starte das Teil, Vodafone screen..nochmal Vodafone screen...dann WM5 Startbildschirm...dann "Bitte den screen berühren zum einrichten"...dann weißer Bildschirm mit dem Scheiß Kreuz...und dann kann ich es 1000 mal kalibrieren und nix passiert...egal ob aufgeschoben oder nicht.
Wenn ich es im Bootloader das Update starte, dauert es wenn er anfangen will ne ganze Weile und er schmeißt mich raus mit Device ist nicht angeschlossen. Wenn ich das Telefon normal booten tue (WM5 wird gestartet) fängt er an zu synchronisieren und ist verbunden trotz dem Kalibrierbildschirm. Auch da bricht er den downgrade ab.
Ich hoffe ja das Vodafone das Ding gleich wegschmeißt ohne den Versuch einer Reparatur. Wenn einer in den Bootloader schaut gibts bestimmt Ärger denke ich. Aber ich bekomm ja erst den neuen und die dann erst den alten!
Was tun sprach Zeus...
If all else fails, you can try to reflash with the SDCard method. No USB connection needed.
The instructions are in here somewhere.
USB methos is going like this:
Format Your card to FAT32. Rename RUU_signed.nbh to HERMIMG.NBH. Copy this to Your card. Put card in to device and softreset holding Power and Ok button.
You should see grey screen witch question. Press Power button and wait untill process ends. When You see Updated Succed, reset with stylus.
Copied this from another thread (just remembered I read this recently)
Olioaglio
I did this like you have said but when i am entering the bootscreen (4 color screen, i see shortly the grey screen (0,1 sec!) and nothing to see except the screen with ipl 1.04 and spl 2.10olipro.
I copied my files to my computer (nothing on the card) and copied the .nbh file from the downgrade to 1.10 olipro (link in the manual from you) without the .exe file on my card. Then i inserted the card and enter the bootloader screen with power button ok button and softreset.
EDIT: After i had formatted my card it works...
BUT after flafshing the 4 colour screen says: Herm200 IPL-1.04 HERM200 SPL-2.10.Olipro
I copied the file RUU_signed.nbh from the folder HERM_SPL1.1ooli_only_customRUU to the card and renamed it into HERMIMG.nbh
The grey screen appears after the softreset...i push the power button...the update was sucessfully...i sofreset...it boots to the calibration screen from WM5...i get into the bootscren with holding OK Power and Softreset and there are : Herm200 IPL-1.04 HERM200 SPL-2.10.Olipro
What happend wrong? Where I am so stupid? God Damnmnmnmnmnmn....
Hey again!
Try this thread. It may help you to.
Essentially, you will do the following:
* Fire up Custom_RUU
* Manually select the correct SPL (Oli 2.1 and HardSPL option)
* Put the phone in bootloader mode
* THEN plug into USB
* Press continue
Oftentimes, this gets past the cannot connect error.
todd_jg said:
Hey again!
Try this thread. It may help you to.
Essentially, you will do the following:
* Fire up Custom_RUU
* Manually select the correct SPL (Oli 2.1 and HardSPL option)
* Put the phone in bootloader mode
* THEN plug into USB
* Press continue
Oftentimes, this gets past the cannot connect error.
Click to expand...
Click to collapse
OK...i think you and oliaglio are the right guys to help me!
This method above works!
BUT: After the selfmade softreset from the RUUwrapper.exe WM5 boots normally...then i get into the bootloader4colorsscreen and there it was...
ipl 1.04 and spl 2.10olipro
why? please god...change the spl into 1.10...
Trieoner said:
OK...i think you and oliaglio are the right guys to help me!
This method above works!
BUT: After the selfmade softreset from the RUUwrapper.exe WM5 boots normally...then i get into the bootloader4colorsscreen and there it was...
ipl 1.04 and spl 2.10olipro
why? please god...change the spl into 1.10...
Click to expand...
Click to collapse
OMG - I remember I had that problem once. That was a ***** to solve. In fact, it was so tough that MrVanx made a SPECIAL GUIDE FOR SPL DOWNGRADE. We are lucky for this.
Oh yeah, and the reason that it won't change the SPL is because that is exactly what HardSPL does - it protects the SPL from being overwritten, since THAT is what bricks phones. Trust me, it is for your own good (and mine too - notice my avatar!). Make sure that the SPL downgrade is the last flash operation you perform.
What does your text mean? I dont understand what you have written.
Is it possible for me to downgrade or not? when i use the guide it doesnt work for me. I am a little bit confused....
My school english is so terrible...****.
No more ideas todd and oliaglio?
Please help me...
The downgrade guide hould work if done properly. Use the files in the links in the downgrade guide. It is hard to replace Oli 2.1 - everything will work except that. Just like you described. But this step:
The first step is to dowgrade to SPLversion 1.10.oli. Firstly download this archive and extract the files to a temporary folder, connect your device up via the USB port and allow it to connect to activesync. Run "RUUWrapper.exe" which will fire up the RUU program.
Click to expand...
Click to collapse
is most important. That will write over Oli 2.1 and get it to Oli 1.1. After that, you can put whatever SPL you want on there. Be sure to use the Oli 1.1 link in the thread.
so actually by following the guide, I can choose SPL 1.11 instead of the listed SPL's 1.04 and 1.06 ?
Is it like, if I install the swedish ship version, the spl will go back to 1.11? And after I have done that, I can install the official norwegian WM6 ROM?
Hi,
I tried to upgrade my XDA using Ranju's latest updater, the whole process failed and now I'm stuck at the BL screen "USB" at the top (when connected, otherwise it says "serial") and "v1.00" at the bottom.
My PC, SyncCentre and Windows Mobile Device Centre (I'm using Vista) all show the device as being disconnected (up until trying to upgrade everything had been fine).
As it's not showing up on my PC all of the software options for recovering it dont fail, all end with a plethora of USB not connected errors etc
I've tried the how-to on the wiki: http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader_Serial to no avail.
Does anybody have any ideas? Greatly appreciated,
Thanks,
Lee
with jasjar-bl1.01-ruu-v1.2 I always restart my JJ Leave your uni in bl and start the application Good luck......
I think the Vista is not the problem this upgrade don't use AS or "in italian centro gestione dispositivi WM"
Bye
M.C.
Well, I flashed my Qtek a while ago, it failed to flash (using Vista) and doing a hard reset after it whas hanging at the startupscreen(the one with all the rom/radio numbers). No matter what I tried, following the instructions on Vista windows mobile center all failed... The good news is that your computer and your PDA still see when it is connected, ie USB/Serial, like in my case!
I then tried it on my desktop/XP, it flashed without a problem...
The funny bit is that I flashed my herald (WM6) 2 times using Vista without any problem...
I cannot explain but if U have the possibility, try and see if it works on XP...!
Good luck!
are you trying to flash it WITH your SIM card and / or SD card inside? If so, try taking them both out! It worked for me a few times!
I would start by getting rid of vista !
i had the same xprience
the different was i downgrade from wm6 to wm5 (i need the vcall)
failed in vista, succeed in xp
-> my advice : try in xp !! don't forget to remove the sd card
Manual for how to flash a rom in Vista
Read this post, you have the solution to the problem here:
http://forum.xda-developers.com/showthread.php?t=313001
You need to update the driver manually, if not, will not be able to install the driver.
You need to do this without sd/sdhc and without the sim.
If you follow these instructions, you can flash with success.
Greetings.
Kali.
Hi All,
I did some search, but it seems there's no Error 270 topic for a Touch Diamond. And surprisingly that's the problem I have. Here's the deal.
For a whole duration of the day I've been trying to upgrade to 2.03 ROM, which would my first ROM upgrade. I tried the ROM from the phone's importer site, the HTC site, xda site, all lof them with the same result. After the RRU reaches 100% the mobile goes to Tricolor with "Upgrade ROM code error" message and the RRU shows says Error 270.
I searched the forum and saw that some of the people suggested to burn different HardSPL versions, so I tried burning the 2.03 with various HardSPL versions, 1.24, 1.30, 1.93 are the few I remember, there were more, both signed and unsigned, the last is SPL-1.93.OliNex unsigned -> all of them installed nicely, with a clean reset after them but the following upgrade to 2.03 failed every time the same way, Error 270, as usual.
I use an original USB cable and an XP OS that, at the moment of RUUing, runs nothing but the RUU.
By the way, I also tried doing the upgrade from the internal storage. I renamed the ~100MB file to the name specified in the Noob Guide (DIAMIMG.NBH) and put it at the root of the storage device, but the bootloader gray screen says no image found (or something similar and goes directly to trying to find a USB host).
OK an Update (for whoever gets this problem after me).
I'm not sure why the installation from PC failed time after time - this is something for smarter people to find out.
I solved it by eventually managing to copy one of the numerous RUU_signed.nbh I tried, to the Internal storage, renaming it to the DIAMIMG.NBH and running the bootloader procedure.
Why didn't this work for a 6-10 times I did this before, I donno, the important thing that now it did, and I'm going to enjoy my diamond starting this moment.
Error Code 270
Dear Hunter_I
i have HTC Touch Diamond
i m facing the same problem. and i even dont know how to find the file and how to copy it in HTC internal storage
it is totally un accessible for me
can u help me in this regard
regards
Khurram
Dear Hunter_I
i have HTC Touch Diamond
i m facing the same problem. and i even dont know how to find the file and how to copy it in HTC internal storage
it is totally un accessible for me
can u help me in this regard
regards
Khurram
Hello,
I'll be happy to help to the extent I can.
But can you please specify where you stand right now?
I mean, what steps did you take already and where did you stop?
For example,
Do you have Hard SPL installed already?
What's the ROM you currently have?
Can your phone boot up correctly? Can it sync with your PC?
Is your phone locked?
Let me know some details.
Getting MTP application crash when connecting with USB..
annychange of downloading it somewhere ?
Can't use odin/kies.
do0fusz said:
Getting MTP application crash when connecting with USB..
annychange of downloading it somewhere ?
Can't use odin/kies.
Click to expand...
Click to collapse
This doesn't belong in the development section.
As for your answer:
You do not need the MTP application to connect to odin (READ the FAQ!)
As for the application, it will probably work if you flash new firmware. Alternatively, if you don't want to do that, return the phone to your retailer.
/solved
On JG1 the app is crashing..
i'm sorry for asking developers if they concure the problem or have any idea..
without MTP i'm not able to connect with USB..
so, i can't flash, or update, or....
do0fusz said:
i'm sorry for asking developers if they concure the problem or have any idea..
Without mtp i'm not able to connect with usb..
So, i can't flash, or update, or....
Click to expand...
Click to collapse
You DO NOT need mtp to flash!
Het is echt heel simpel de tutorials te volgen. Die MTP applicatie is alleen in android. Maar android staat UIT als je flasht!
do not need... depends.
if you like the simple way, (update.zip) yes.. you do.
the pc wont reconize SGS without the application.
en ja, de tutorials lees ik aandachtig.
en ik gebruik ook de search optie..
You never need it..
If you put the mobile into the download mode, start KIES and the drivers will be installed (or choose reinstall from menu).
And if you want to use update.zip then you are connected via adb-bridge..
So no need for MTP! MTP is just for syncing and with FW JG1 it was dead (infinite start of the app).
Also MTP will not start on other launchers, except of TouchWiz!
Well we said you should flash your device. We didn't say anything about installing an update. The update will most likely not solve your problem. A flash definitely will.
true..
syncing the SGS with outlook is a b*tch..
gonne try a diffrent way, maybe true the gmail account
Yeah!
A good syncing utility like iTunes for the iPhones would be great for android devices..
thE_29 said:
A good syncing utility like iTunes for the iPhones would be great for android devices..
Click to expand...
Click to collapse
Well iTunes has its problems too ... but in most cases it does what it should. Something that cannot be said about Kies.
In JP3 the MTP application is working again.