Develop Bugs

Gday, me BA is dead, failed to upgrade..

I did not get the upgrade out of the PDA first, it is in bootloader mode.
By mistake, I picked up a XDA II upgrade instead of PDA III and clicked the sucker, only to get bummed completely. I guess it "deleted" the orig OS, or parts of it.
The BA is from o2, but private buy, no support expected from them.
The BA was in German, there is no "ID" for o2 given in the ID table.
I even tried T-kom's blackberry upgrade (German) gives same error as the 3 WWE SHIPS I tried, 120 "Country ID error"
Anyway to get the needed ROM info with the bootloader only ?
I would not mind the BA_5.1.1700_build_14343_Upgrade Engrish...
Somebody please help bring my new thang into life again

Hi Man,
Do not worry...Just upgrade the ext rom part of any ROM u have and it will be live again...then u can re-upgrade it completely

One problem I recognize I have: how to get DevData...
Thanks for the assuring words. But I have no idea what you mean with :"upgrade the ext rom part of any ROM u have and it will be live again."
I Assume the ext rom is a nbf file ?
I tried several of the ROM linked from this site (without modifiying them) no succes.
The nice guide made, explains how to get devdata on the PDA when working, but how to get that when bootloader mode is only option ? Or is that necessary? Are there ROM's that works anyway ??
The guide says:
"Device data reads:
PH20B 0 B GER R T-MOB101 1.12.00 0 0 1.12.100 1.02.00 02.00"
I do not have any of this info on my PDA Can it be retreived from the PC ?? (with a program)
I might also explain why I wanted to upgrade the ROM and didnt realize how "complicated" it can be. When trying to install a new appl. (Copilot) with a SD-card, the BA gave:
"setup-Fehler
Die datei "\storagecard\\2577\tts.cab ist keine gultige datei fur windows CE setup"
So, I thought the ROM version was ****ty not even knowing CAB files!
Any hints & help much appreciated
Rgds

Okeh..
Learned alot during the day on this site, it RAWKS!
I found the BA_TMUK_14200_112_11300_Ship (ENG)
& the MDAIII_TMDE_14201_116_11300_Ship (GER)
Using the "MaUpgradeUt_noID" I managed to get the GER running
Dropped the RADIO ROM of the GER to the ENG version and tried runnin the MaUpgradeUt_noID from that ROM. It worked!
The "standard" windows theme is NOT in the ENG pack, but in the GER one.
I then try run these Copilot cab files, still no luck ?!?
Tried some other CAB files snagged from the FTP, they worked...
I both tried the SD card install (autorun the cab) and from the install CD (to PC & device) both gives same error ? A little suspicious that none of the 2 install options work. Perhaps copilot is NOT compatible...

Help: Error o2 ROM Upgrade to 1.60.52 GER with own ExtROM

I have a O2 XDA mini S, using O2-de Germanyconnection, It doesent show home zone.
So I read in this form about upgrading
http://forum.xda-developers.com/viewtopic?t=7196#33907
and downloaded the file and installed while I started to Install, in one step it said it will take few mins to erase data and the processes will take a few mins. But it the same time my phone showed a error message
Code:
Es gab ein problem mit
HimaClearJumpCode.exe
and the installation also stoped!
Can any one help me to upgrade it!
Thanks in advance!

HELP! Can't restore original spl 1.93 from olinex1.40

Hi there, I'm Italian I'm here because your'e the only one on this planet who can help me.....so sorry for my english.....
I had some trouble with my diamond, the touch screen is no longer working so I have to send it back to htc, now I have to restore original rom and spl.....
I installed olinex 1.40 and the last original italian rom 2.03....
Now I downloaded my former rom (1.93.772) from italian server, I installed it and everything seemed to be right, (I can't check it because the diamond blocks me at the aligning screen, the touch screen is broken and I can't start the phone...the aligning screen appears to me forever and there's no way to bypass it)...
Then I downloaded the original spl 1.93 from your server...I cant use active sync because I can't start the phone so I have to work in boot mode.....I followed carefully the procedure, that is quite easy, but there is no way to remove the olinex 1.40, the process starts, it reachs 100%, but when i check the spl is always the 1.40 olinex....and restore original spl...I try also the usb trigger mode, with the spl putted as dimndimg.nbh...
Please help me!!!!!!!!! I' going crazy!!!!!
Thank you very much for the attention...
DAVID

do you hear me?

hi
hi, did you check out this? http://forum.xda-developers.com/showpost.php?p=2324837&postcount=20 see if that helps you.

I read everithing and now I'm a sort of diamond technician, but I cannot solve this problem, I can only flash in bootloader mode cause the telephone cant initialize windows, it' blocks in the aligniment screen and can't go on, so maybe the bootloader mode isn't strong enough to by pass the write protection of the 1.40 olinex and overwrite the hardspl...HELP HELP HELP

I'got the same issue, you have to install a rom !! and use ActiveSync in order to get the SPL1.93 ! I think in bootloader mode, you can't change the SPL!
Good luck

Freaky, I have the same issue it will not remove no matter what.
HTC have sent mine back, they say the HardSPL 1.40 OliNex damages the mainboard and causes touch screen failure! They want £230 for a new one
If you find out how to remove let me know, I've flashed all sorts and no luck it still says it.
Andrew

PS) I have activesync working with a failed touch screen (stuck on the align screen window), copying and running stock 193 in /internal doesn't change it. When I try:
http://forum.xda-developers.com/show...7&postcount=20
it sits at 0% then fails. The other program they mention to force it uinto bootloader I can' run obviously because the touch screen is broke.

miscioidi said:
Hi there, I'm Italian I'm here because your'e the only one on this planet who can help me.....so sorry for my english.....
I had some trouble with my diamond, the touch screen is no longer working so I have to send it back to htc, now I have to restore original rom and spl.....
I installed olinex 1.40 and the last original italian rom 2.03....
Now I downloaded my former rom (1.93.772) from italian server, I installed it and everything seemed to be right, (I can't check it because the diamond blocks me at the aligning screen, the touch screen is broken and I can't start the phone...the aligning screen appears to me forever and there's no way to bypass it)...
Then I downloaded the original spl 1.93 from your server...I cant use active sync because I can't start the phone so I have to work in boot mode.....I followed carefully the procedure, that is quite easy, but there is no way to remove the olinex 1.40, the process starts, it reachs 100%, but when i check the spl is always the 1.40 olinex....and restore original spl...I try also the usb trigger mode, with the spl putted as dimndimg.nbh...
Please help me!!!!!!!!! I' going crazy!!!!!
Thank you very much for the attention...
DAVID
Click to expand...
Click to collapse
In order to switch from 1.40 to 1.93 HARD SPL, you must you the jump spl program. It's in my signature. Also read the txt included for the instructions.
Let me know how it goes...

band27 said:
In order to switch from 1.40 to 1.93 HARD SPL, you must you the jump spl program. It's in my signature. Also read the txt included for the instructions.
Let me know how it goes...
Click to expand...
Click to collapse
>> prun JumpSPL.exe ...
ERROR: CreateProcess failed with errorcode = 30123
- UNKNOWNERROR: 0x000075ab

snoopy20 said:
>> prun JumpSPL.exe ...
ERROR: CreateProcess failed with errorcode = 30123
- UNKNOWNERROR: 0x000075ab
Click to expand...
Click to collapse
First plug phone into computer via active sync....
Then:
Copy the following files to the Diamond root directory
"Copy JumpSPL.exe & "copy SSPL"& sspl-1.01-reloc-mod.nb
Then: "execute Diamond SPL now - screen may trun black"
Then: "run DiamondCustomRUU.exe to flash any HardSPL

What is "copy SSPL" ??

snoopy20 said:
What is "copy SSPL" ??
Click to expand...
Click to collapse
Copy means either to right click and select copy to then past it to the root of the diamond directory or you can choose to drag this file to the diamond directory. Then continue to copy the other files.
Another way is to just start with the Diamond-SSPL.exe file and it will tell u to copy these files one by one. Make sure that you are activesynced prior to started this.

What I mean is WHAT IS sspl.exe
It's not in your magic zip file.
And when I find it, how can (I / We) execute it with failed touchscreens?

Still getting ...
>> prun JumpSPL.exe ...
ERROR: CreateProcess failed with errorcode = 30123
- UNKNOWNERROR: 0x000075ab

I'm having the same problem tryng this stuff...does't work at all....I sent 2 private message to olipro but no response....Is there someone out there who can hepl me??????

is there any absurd rom using just the button of the pda excluding the touch screen??????

You must flash in bootloader mode and run ROMUpdateUtility.exe in "C:\ROM" with file "RUU_Signed.nbh" 1.93 version in his directory (C:\ROM).
Use Windows XP and cable miniUSB original and Activesync of course.
1)Use Activesync conected.
2)Copy ROMUpdateUtility.exe and RUU_Signed.nbh (HardSPL 1.93)
3)Enter in bootloader mode
4)From "C:\ROM" run ROMUpdateUtility.exe

Leoarg....I can't activesync the diamond in bootloader mode....I can activesync only if I start the diamond in normal mode....when it reaches the aligniment screen it stops and sinconize

miscioidi said:
Leoarg....I can't activesync the diamond in bootloader mode....I can activesync only if I start the diamond in normal mode....when it reaches the aligniment screen it stops and sinconize
Click to expand...
Click to collapse
mmmm, Ok. What problem!

Why remove the 1.40 is so hard?????.....why flashing in bootloader mode doesn't bypass the overwriting protection?? why olipro is not answering my private message?

[Q] Artemis (MDA3C) dead - only red light

Can anyone please help me?
I own an artemis aka MDA3C (T-Mobile, GER) and it won't turn on.
no responce from the device, except for a constantly flashing red led when connecting to wall charger or any mini-usb cable. it doesn't turn orange or green,
I won't turn on nor even load the bootloader.
What can i try to reanimate it? Maybe hardware error, like a broken fuse?
Battery is in perfect working order, i tried 3 different ones with a spare o2 xda orbit.
Many thanks in advance

jeffhanneman said:
Can anyone please help me?
I own an artemis aka MDA3C (T-Mobile, GER) and it won't turn on.
no responce from the device, except for a constantly flashing red led when connecting to wall charger or any mini-usb cable. it doesn't turn orange or green,
I won't turn on nor even load the bootloader.
What can i try to reanimate it? Maybe hardware error, like a broken fuse?
Battery is in perfect working order, i tried 3 different ones with a spare o2 xda orbit.
Many thanks in advance
Click to expand...
Click to collapse
remove and replace the battery , insert the device into bootloader then you re-flash rom the device !!!
>>>HR<<<

I'd like to do so, but the device doesn't start or boot the bootloader - even with a new battery

jeffhanneman said:
I'd like to do so, but the device doesn't start or boot the bootloader - even with a new battery
Click to expand...
Click to collapse
Resetting Your Pocket PC Phone
Occasionally, you may need to reset your device. A normal (or soft) reset of your device clears all active program memory and shuts down all active programs. This can be useful when your device is running slower than normal, or a program is not performing properly. A soft reset is also necessary after the installation of some programs. If a soft reset is performed when programs are running, unsaved work will be lost.
You can also perform a hard reset (also known as a full reset). A hard reset should be performed only if a normal reset does not solve a system problem. After a hard reset, the device is restored to its default settings — the way it was when you first purchased it and turned it on. Any programs you installed, data you entered, and settings you customized on your device will be lost. Only Windows Mobile software and other pre-installed programs will remain.
To perform a soft reset
• Use the stylus to press the RESET button found on the lower left side of your device. Your device restarts and displays the Today screen. To perform a hard reset
1. Press and hold the Left SOFT KEY and the Right SOFT KEY, and at the same time, use the stylus to press the RESET button at the lower left side of your device.
2. Release the stylus, but continue pressing the two soft key buttons. Release them only when you see the following message on your device screen: “Press Send to restore manufacturer default, or press other keys to cancel.“
3. Press on your device. Warning! Your device will be set back to factory default settings. Please ensure any additional installed programs and/or user data have been backed up before a hard reset is performed.

Thanks for your advice, but the device doesn't reset.
No soft- or hardreset. it's just dead except for a red glowing led, as quoted in the first post.
I need further assistance, no hint on doing a soft or hardreset

jeffhanneman said:
Thanks for your advice, but the device doesn't reset.
No soft- or hardreset. it's just dead except for a red glowing led, as quoted in the first post.
I need further assistance, no hint on doing a soft or hardreset
Click to expand...
Click to collapse
HTC Artemis (P3300) hard reset
Resetting Your Pocket PC Phone
Occasionally, you may need to reset your device. A normal (or soft) reset of your device clears all active program memory and shuts down all active programs. This can be useful when your device is running slower than normal, or a program is not performing properly. A soft reset is also necessary after the installation of some programs. If a soft reset is performed when programs are running, unsaved work will be lost.
You can also perform a hard reset (also known as a full reset). A hard reset should be performed only if a normal reset does not solve a system problem. After a hard reset, the device is restored to its default settings — the way it was when you first purchased it and turned it on. Any programs you installed, data you entered, and settings you customized on your device will be lost. Only Windows Mobile software and other pre-installed programs will remain.
To perform a soft reset
• Use the stylus to press the RESET button found on the lower left side of your device. Your device restarts and displays the Today screen.
Hard reset Soft reset
To perform a hard reset
Hard reset Soft reset
Press and hold the Left SOFT KEY and the Right SOFT KEY, and at the same time, use the stylus to press the RESET button at the lower left side of your device.
Release the stylus, but continue pressing the two soft key buttons. Release them only when you see the following message on your device screen: “Press Send to restore manufacturer default, or press other keys to cancel.“
Press on your device. Warning! Your device will be set back to factory default settings. Please ensure any additional installed programs and/or user data have been backed up before a hard reset is performed.

Hi,
have you tried booting without battery ? Have you removed additional cards like SIM or Storage card ? Then try to start or enter bootloader. The contacts (pins) touching the battery are clear without any mess or rust ?

...
you must buy a "brand new" battery (not a spare).
1) put the new battery in your device
*do not turn it on.
2) charge the device untill green led
robke99 said:
Thnx,I stuck a brand new battery in it.
Click to expand...
Click to collapse
raving_nanza said:
did it work?
Click to expand...
Click to collapse
robke99 said:
I think so. Thnx for your advice!
Click to expand...
Click to collapse
if you still have the constant red led when charging the brand new battery.
DO THIS AT YOUR OWN RISK
i will not, under any circumstances, be to blame if you break your device doing this so be warned!:
3) in my experience the pins on the device mini usb were not connecting properly to the mini usb lead (to the pc usb cable).
* the best way to "quickfix" this is to open the device and bend them back into place (inwards) - be carefull because these can break easily.
(not easy to fix when broken)
* you wont need to bend the pins much.
* unplug your mini usb and check that the pc mini usb cable goes into the device mini usb before putting the device back together.
(so you know you have not bent them too much)
*i think you will need to do step 3.
*be carefull
Rn

Hallo,
weiß nicht ob es die aehnliche Situation ist wie schon mehmals gelesen habe, aber das Artemis hat eine Schwäche - CPU Lötkontakte. Manchmal läuft es, manchmal nicht...
Im Netz gibt es Beschreibungen - ich glaube ein Schweizer hat es mit Heissluft bearbeitet... mit sehr guten Bildern (Beschreibung auf Englisch)
Ich würde das PDA vor dem Hard-Reset erwärmen (ca. 40grd. C), bzw. ein bisschen drücken. Wenn es dann starten sollte ist der Grund klar.
Der Akku kann gemessen werden - an '+' und '-' sollten zw. 3,8 bis 4,1V anliegen. Die Ladung wird im Akku selbst gesteuert. Das PDA selbst stellt nur die Stromversorgung fuer die Ladung bereit.
Gruss
K.

...
ENGLISH ???

Danke für den Hinweis. Gibt's eine Quelle zu dem Tip?
An welcher Stelle müsste man am Mainboard direkt ansetzen?
Akku ist OK und geladen..
danke und gruss!!
kamial said:
Hallo,
weiß nicht ob es die aehnliche Situation ist wie schon mehmals gelesen habe, aber das Artemis hat eine Schwäche - CPU Lötkontakte. Manchmal läuft es, manchmal nicht...
Im Netz gibt es Beschreibungen - ich glaube ein Schweizer hat es mit Heissluft bearbeitet... mit sehr guten Bildern (Beschreibung auf Englisch)
Ich würde das PDA vor dem Hard-Reset erwärmen (ca. 40grd. C), bzw. ein bisschen drücken. Wenn es dann starten sollte ist der Grund klar.
Der Akku kann gemessen werden - an '+' und '-' sollten zw. 3,8 bis 4,1V anliegen. Die Ladung wird im Akku selbst gesteuert. Das PDA selbst stellt nur die Stromversorgung fuer die Ladung bereit.
Gruss
K.
Click to expand...
Click to collapse

[Q] haret.exe stopped working (htc touch pro2)

Hello all,
First off, i tried to access the FAQ questions posted in Froyo build thread but that keeps coming back with either an 500 internal error or 400 error and google + search here did not yield me that much information (either that or i am completly blind at this hour of day)
I had followed the instructions to install the Froyo bundle on my HTC touch Pro 2 and it worked for about an hour, then i suddenly heard my phone reboot and when it came back up i tried to start haret again but was met with this error:
"The file 'HARET' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. You might need to reinstall or restore this file."
Now i tried to format my SD card and put the whole bundle on there again but that was a no go.
As for some silly reason Activesync does not work correctly in combination with my laptop (vista x64 if it matters) i could also not edit the registry as was suggested in another thread. Because of this a ROM update on my phone seems out of the question too (it keeps saying there is no connection with the phone to be found.. -_-)
I am pretty much at a loss of what i could try right now and was hoping that anyone has an idea what i could try next?
Thank you in advance

Hi,
I've got the same problem.. tryed that done that..
Its still NOT working
A,, for dutch people it sais:
HARET.EXE
Het bestand 'HARET' kan niet worden geopend. Het is niet ondertekend met een vertrouwd certificaat of een van de componenten is niet gevonden. U moet dit bestand wellincht opnieuw installeren of herstellen als dit probleem zich blijft voordoen..
thanks,

You...
...both need to reformat you sdcard
and start from scratch
i've done that myself many times
and had to resort to a full reformat of the card
I would suggest to not get attached to the data you have on the sdcard
if you do you'll find yourself loosing it all the time due to an error on your part and start fresh all over againg
as of now i have my rhod300 working flawlesly
bluetooth, wifi, 3g
it took me a long time to get it done, but stick to it and you too will have a working rhod...