Related
Hi there.
As the above title says, what happen if I do so?
I do not have recovery version 2.5.1.3 in my ROM Manager anymore(I have no idea know why). Also do not have 3.0.2.5.
The only recovery I have is 2.5.1.4, 3.0.0.5, 3.0.0.6 and 3.0.2.4. Plus I am unable to flash 2.5.1.4 version(it pops up an error)
Some have no issues, but some have experienced issues when trying to restore cwm backups.
Have a look in the LeeDrOiD 2.2.3 thread a few days ago. I have posted methods to manually flash it via a tool or adb commands. I have also provided dl links as well.
Sent from my Desire HD using XDA App
Hi Upintheair
Thanks for the reply. Erm.. do you remember the exact date you post that in LeeDroid's thread? The thread is overloading. I cannot find them. =(
From Index of /cm/recoveries Download recovery-clockwork-2.5.1.3-ace.img
Try one of these 2 tools, instructions are on the threads;
1. Thread: [TOOL][All devices & OS] Fastboot Commander [v.1.1]
Download: Fastboot Commander v1.1
2. Thread: Android Flasher
Download: [UTILITY] Android Flasher(Recovery,splash1,Radio,HBOOT,bootanim)[V1.7.4]
OR
Manually through ADB:
1. Place the image in where fastboot.exe is located.
2. Connect phone to PC with Bootloader FASTBOOT USB
3. Using commands "fastboot flash recovery recovery-clockwork-2.5.1.3-ace.img", then "fastboot reboot", recovery
3. Using commands "fastboot flash recovery recovery-clockwork-2.5.1.3-ace.img", then "fastboot reboot", recovery
Click to expand...
Click to collapse
I tried many threads and find no answer to my question.
On my ubuntu I installed adb and can't remember about fastboot.exe whether it was installed by default or I downloaded it. And know I lost it - deleted accidentally.
1.My ques is where can I find it I mean fastboot? I reconfigured my adb back but there is no fastboot.
2. Can I use fastboot-linux from CWM 3.0.2.8 Installer instead?
It flashed cwm perfectly. But I am not shure about flashing radios and stuff.
Thanks for the links to the Leedroid cwm version
Sent from my DHD using XDA App
kgulruh said:
I tried many threads and find no answer to my question.
On my ubuntu I installed adb and can't remember about fastboot.exe whether it was installed by default or I downloaded it. And know I lost it - deleted accidentally.
1.My ques is where can I find it I mean fastboot? I reconfigured my adb back but there is no fastboot.
2. Can I use fastboot-linux from CWM 3.0.2.8 Installer instead?
It flashed cwm perfectly. But I am not shure about flashing radios and stuff.
Thanks for the links to the Leedroid cwm version
Sent from my DHD using XDA App
Click to expand...
Click to collapse
Warning: Flashing wrong radios or incorrectly can result in a BRICK !!! Your own risk..........
Edit: I would advise flashing through a battery only powered notebook, don't want a power surge or cut 1/2 way through a flash . Also ensure notebook & phone batteries have near full charge.
Fastboot Commander v1.1 is compatabe with Linux, there is instruction how to install the tool in the Dev's thread. It has everything you need in the zip, and no need for the adb / fastboot commands in CMD.
...............The first result Mr. Google gave me with the search string "download fastboot.exe" Choice of platforms; Windoes, Mac, Linux
Once extracted, just copy the files into your SDK folder where adb.exe is located (maybe tools or platform-tools........)
To make sure fastboot is working ok, boot phone into FASTBOOT, connect to PC & it will change to FASTBOOT USB. Open up CMD and navigate (cd\......) to the folder where adb & fastboot.exe is now located. Now type "fastboot devices", if connected & communicating correctly using Fastboot commands -> HTxxxxxxxxx, giving the device serial number.
If you want to use CMD:
Place image inside SDK folder where fastboot & adb.exe are located.
Rename it to radio.img (unless you like to type the whole name again)
CMD type: " fastboot flash radio radio.img", then
"fastboot reboot"
I am not too sure about Linux PCs, always been Windows until Android.
It is strange that CWM is not available to update TO 3.0.2.6 in ROM MANAGER...
this version is compatible with leedroid. you must to have installed ROM manager ver.4.1.0.0 from the android market..
SERGI.3210 said:
It is strange that CWM is not available to update TO 3.0.2.6 in ROM MANAGER...
this version is compatible with leedroid. you must to have installed ROM manager ver.4.1.0.0 from the android market..
Click to expand...
Click to collapse
You'll have to post that question to the ROM Manager Koush.
If you require a CWM Recovery version not listed in ROM Manager, flash through the methods I posted above. Links to Index of /cm/recoveries is there as well as xxxxxxx2.5.1.3-ace.img
OR
CMD: "fastboot flash recovery recovery-clockwork-2.5.1.3-ace.img"
Thanks UpInTheAir
I'll try it later tonight. Guess I will try to manually flash them.
It is exactly how we flash radio using the radio flash tool but this time change the "radio" to "recovery"?? this time im suppose to use back the same tool right?
I just recalled I read it somewhere last time when I was learning how to flash new radio. x)
superstick1 said:
It is exactly how we flash radio using the radio flash tool but this time change the "radio" to "recovery"?? this time im suppose to use back the same tool right?
Click to expand...
Click to collapse
If you are referring to the "tool" as in the CMD (Command Prompt)?
If this is what you mean, the answer is Yes & Yes.
Most of the tools, some examples & links I've given, just save you time, not having to use the adb or fastboot commands, cd\ (navigate) to the location of adb.exe or fastboot.exe in the SDK folder etc. These tools can also do a lot more, particularly Fastboot Commander which can be run on Windows or Linux.
I just try it and it says "error: cannot load 'recovery-clockwork-2.5.1.3-ace.img" =(
This is what I do
1) Firstly when i was at the cmd window.. I type "adb reboot bootloader"
2) Then "fastboot flash recovery recovery-clockwork-2.5.1.3-ace.img"
and it pops up that error. =/
superstick1 said:
I just try it and it says "error: cannot load 'recovery-clockwork-2.5.1.3-ace.img" =(
This is what I do
1) Firstly when i was at the cmd window.. I type "adb reboot bootloader"
2) Then "fastboot flash recovery recovery-clockwork-2.5.1.3-ace.img"
and it pops up that error. =/
Click to expand...
Click to collapse
Ensure Fastboot is OFF & USB debugging ON in phone settings
When in FASTBOOT, does it say FASTBOOT USB when phone is connected?
Did you test Fastboot communication by command "fastboot devices"?
Make sure the recovery image is copied to the SDK folder where fastboot.exe & adb.exe is located.
Make sure the name is exact. You could also rename it to recovery.img , and the change the command to "fastboot flash recovery recovery.img" (NO "quotes")
Edit: I see your signature is ENG S-off?, double check in HBOOT Bootloader. If the above still doesn't work, try the Fastboot Commander Tool, maybe your making a typo somewhere........
1. Ensure Fastboot is OFF & USB debugging ON in phone settings
Erm Im not sure about this, but I thought if we want to do anything such as flashing recovery we need to have Fastboot ON? Just to double confirm first before I do anything. ^^
2. When in FASTBOOT, does it say FASTBOOT USB when phone is connected?
How do I check this? =/
3. Did you test Fastboot communication by command "fastboot devices"?
Same as the above. How do I check this?
4. Make sure the recovery image is copied to the SDK folder where fastboot.exe & adb.exe is located.
Yes. Checked.
5. Make sure the name is exact. You could also rename it to recovery.img , and the change the command to "fastboot flash recovery recovery.img" (NO "quotes")
Tried. Did not work. Same error coming out.
I try flashing other recovery such as 3.0.2.6 but still the same error.
superstick1 said:
1. Ensure Fastboot is OFF & USB debugging ON in phone settings
Erm Im not sure about this, but I thought if we want to do anything such as flashing recovery we need to have Fastboot ON? Just to double confirm first before I do anything. ^^
2. When in FASTBOOT, does it say FASTBOOT USB when phone is connected?
How do I check this? =/
3. Did you test Fastboot communication by command "fastboot devices"?
Same as the above. How do I check this?
4. Make sure the recovery image is copied to the SDK folder where fastboot.exe & adb.exe is located.
Yes. Checked.
5. Make sure the name is exact. You could also rename it to recovery.img , and the change the command to "fastboot flash recovery recovery.img" (NO "quotes")
Tried. Did not work. Same error coming out.
I try flashing other recovery such as 3.0.2.6 but still the same error.
Click to expand...
Click to collapse
1. Mine works fine with usb debugging on & fastboot off.
2. Power off phone. HOLD volume down (don't release) & press power button once. Phone will boot into HBOOT, you will see FASTBOOT. Connect to pc with usb cable. Wait a few seconds and HBOOT will change to FASTBOOT USB.
3. Use Cmd (command prompt) in Windows. Pc to navigate to the sdk tools or platform tools folder (where fastboot.exe is located). Now type "fastboot devices", if you are communicating in fastboot, you will get HTxxxxxx (device serial number), and can now proceed with "fastboot flash recovery recovery.img"
If it doesn't work, you have not setup properly, or typo, I would suggest using fastboot commander tool.
Sent from my Desire HD using XDA App
I got my device number of HT0CCRX00128. Guess I've followed the steps you gave me correctly. Lol. But still the same results, error in flashing the recovery.
I will try that fastboot commander tool later tomorrow. It's getting late here and have to wake up early for work. Plus I havent read that thread properly yet. Lol.
Anyway thanks a lot ya.
UpInTheAir said:
You'll have to post that question to the ROM Manager Koush.
If you require a CWM Recovery version not listed in ROM Manager, flash through the methods I posted above. Links to Index of /cm/recoveries is there as well as xxxxxxx2.5.1.3-ace.img
OR
CMD: "fastboot flash recovery recovery-clockwork-2.5.1.3-ace.img"
Click to expand...
Click to collapse
i know, and I understand you, only I say that there are CWM's versions you very validate for flash apart from the recommended ones that work perfectly, I am flashing with the current one (leedroid, coredroid, hd rev ..) and it me works to the perfection and the nandroid also.
Certainly .... which is the meaning of "koush"???
superstick1 said:
I got my device number of HT0CCRX00128. Guess I've followed the steps you gave me correctly. Lol. But still the same results, error in flashing the recovery.
I will try that fastboot commander tool later tomorrow. It's getting late here and have to wake up early for work. Plus I havent read that thread properly yet. Lol.
Anyway thanks a lot ya.
Click to expand...
Click to collapse
Here are two zip files: Recovery 3.0.2.8 & 2.5.1.3.
3.0.2.8 doesn't show in ROM Manager, but version shows when boot into CWM Recovery, so no worries.
Reference Thread: [RELEASE][25/04/2011] ClockworkMod Recovery 3.0.2.8
I downloaded 3.0.2.8 from the above thread, extracted replaced the 3.0.2.8 image with 2.5.1.3 image (renamed recovery.img), and zipped again to upload.
View attachment Recovery_Ace_v2.5.1.3.zip
View attachment Recovery_Ace_v3.0.2.8.zip
Installation:
1. Power off your DHD
2. Put it in bootloader mode; Power+Vol down and select Fastboot from menu.
3. Plug-in the USB cable. (FASTBOOT USB)
4. Extract xxxx.zip
5. Double click on install-recovery-windows.bat if you're using windows, execute install-recovery-linux.sh if you're on linux or install-recovery-mac.sh if MacOSX.
6. Done! The device will be automatically rebooted.
7. If the version doesn't show in ROM Manager, reboot into recovery to check version actually installed.
I tested the windows commands and worked perfect Linux should too!!
I do recommend you read up a bit yourself on adb & fastboot commands, and if you aren't able to do that, use the flashing tools provided by the various Devs, thanks to them, life is much easier.
Thanks UpInTheAir!
I actually managed to get 2.5.1.3 installed and now I can continue flashing ROMs! Lol.
Erm why wouldnt recovery version show in the ROM Manager? My ROM Manager still shows it is 3.0.0.6 but in the recovery it shows as 2.5.1.3. Thats pretty weird isnt it?
Oops. I am trying to flash ARHD now, but halfway through it "stuck" in recovery and says: /tmp/recovery.log was copied to /sdcard/clockworkmod/recovery.log. please open ROM Manager to report the issue.
What happen here? Its getting complex. =/
UpInTheAir said:
Warning: Flashing wrong radios or incorrectly can result in a BRICK !!! Your own risk..........
Click to expand...
Click to collapse
Thanks a lot man, used the one in cwm 3.0.2.8 update tool "fastboot-linux" and it works perfectly just need to rename it for consistency.
For me typing in linux is better then knowing nothing in windows
superstick1 said:
Thanks UpInTheAir!
I actually managed to get 2.5.1.3 installed and now I can continue flashing ROMs! Lol.
Erm why wouldnt recovery version show in the ROM Manager? My ROM Manager still shows it is 3.0.0.6 but in the recovery it shows as 2.5.1.3. Thats pretty weird isnt it?
Oops. I am trying to flash ARHD now, but halfway through it "stuck" in recovery and says: /tmp/recovery.log was copied to /sdcard/clockworkmod/recovery.log. please open ROM Manager to report the issue.
What happen here? Its getting complex. =/
Click to expand...
Click to collapse
I always boot into CWM Recovery menu to flash, and not through ROM Manager (wherever possible).
Try that way.
PHONE: ROOTED HTC DESIRE GSM S-OFF'D Running cm7
Used ROM manager to update Clockwork Recovery in anticipation of installing the newest CM7 which came out yesterday.
Now i can't reboot into recovery just sticks on the splash screen even when i try and access it through FASTBOOT or by turning on holding down BACK + POWER
There is an article here:
http://forum.cyanogenmod.com/topic/...to-reboot-to-recovery/page__p__4343#entry4343
I just need a little help understanding these, particularly option 1
"Solution 1. - Fastboot
Prerequisites:
Dream/G1 devices with DangerSPL, all other devices (MT3G 32A/32B) with an engineering SPL (S-OFF in HBOOT mode).
Users with SDK tools set up.
How to:
Reboot to bootloader holding Back+Power or Vol.down+Power or whatever combination applies to your device.
Attach your device to a USB port and open up a Terminal/Command prompt of choice
Navigate to the folder where your recovery image is, then flash it like so:
fastboot flash recovery recovery_of_choice.img
Reboot to recovery to verify your work. "
Click to expand...
Click to collapse
Not sure how to do this, is this done through SDK??
Attach your device to a USB port and open up a Terminal/Command prompt of choice
Is this something i get from Unrevoked??
fastboot flash recovery recovery_of_choice.img
Sorry for being basic.
Theres a fastboot faq linked in my signature. Tells you all you need to know.
Another thing, NEVER follow instructions for other phones. EVER
Sent from my HTC Desire using XDA App
Thanks RootSU, looks useful. What is it that i actually need to do though? Do i need to reflash something that i did during the root process or just set up adb in order to try and access recovery that way?
Really appreciate your help here.
Thanks
Ben
Forget adb, its something totally different.
Just set up your PC to work with fastboot as per the FAQ.
Download the recovery you want to flash (Ensure it is a desire version)
Boot into fastboot on the phone (Back and power from off)
Then use the command:
Code:
fastboot flash recovery nameofrecoveryfile.img
Its all in the faq.
Managed to get it up and running, downloaded clockwork recovery then followed the instructions here:
Thanks
Before you start, you will need to set up your computer to properly recognize the phone. You probably did this when rooting originally, but just in case... Install SDK tools for Android, Java runtime, and HTC Sync.
About HTC Sync: The only reason you need HTC Sync installed is for the USB drivers that come with it. But the program itself has been known to cause conflicts. Make sure that HTC Sync is not running in the background by opening Task Manager in Windows and killing it if you find it lurking in there.
Here we go:
1. Download the correct RUU (ROM Update Utility) for your device from androidfiles.org. Make sure you download a Primo_C RUU for a CDMA device (no sim card) or a Primo_U RUU for a GSM device (uses a sim card)!! Also make sure you get the correct RUU for your carrier.
2. Charge the battery above 50% or for at least one hour. If the battery dies during the flashing process, you could hard brick the phone!
3. Run the RUU until the wizard comes up. While the RUU wizard is open, find the temporary folder it created. (Open Explorer in Windows and type %temp% in the navigation bar.) There will be two folders with long encrypted names. In one of them you will find ROM.zip. Open it with 7zip and extract recovery.img or recovery_signed.img. Put it in the location were you've installed Android SDK tools. This is the stock HTC Recovery and it is needed to run the RUU.
4. Boot the phone into bootloader (power off, hold down volume and press power) and highlight FASTBOOT using the volume rocker and pressing power. Then connect the USB cable. You should see FASTBOOT USB.
5. Open a command prompt in Windows and navigate to the folder where you installed Android SDK tools. Flash the stock recovery extracted in step 3 above using the following command:
Code:
fastboot flash recovery recovery.img
or
Code:
fastboot flash recovery recovery_signed.img
6. Relock the bootloader using the following command:
Code:
fastboot oem lock
7. Re-run the RUU. It will restore the device to it's original condition, locked (though *** RELOCKED ***) and unrooted.
Once the install is done you'll have unlock the bootloader again using the token you already have from the first time, reflash CWM Recovery and re-root. All this will be 10x easier than the first time.
If you do re-root your phone, be 100% you backup the stock ROM in ClockworkMod Recovery before making changes!
Hi
Thanks for that perfect decsription exactly when I needed it
I just had a weired effect with my new windows 7 laptop that I want to share.
I installed the USB drivers and "fastboot devices" showed my HTC fine
but even flashing the stock recovery image was not working.
So it was stucking in the "Sending" part and never continued.
I then moved to my old laptop with Vista did exactly the same things
and there it worked without problems.
I disabled virus scanner, checked for htsync and used the original USB cable
without success.
But now I know why I normally never touch Windows and only
work on linux
Regards
max
---------- Post added at 11:19 PM ---------- Previous post was at 10:33 PM ----------
Hi
CafeKampuchia said:
If you do re-root your phone, be 100% you backup the stock ROM in ClockworkMod Recovery before making changes!
Click to expand...
Click to collapse
I have done that now - compared to my first "try"
Regards
max
hi. thanks for the tips.
however when i do this, i get an error "FAILED <remote: signature verify fail>
Any suggestions?
ur RUU and CID is diff...
ryanlow134 said:
ur RUU and CID is diff...
Click to expand...
Click to collapse
and... how do i make them the same?
lcavada said:
and... how do i make them the same?
Click to expand...
Click to collapse
Use the correct RUU package for your device
regards
max
Another way of saying it is that you downloaded the wrong RUU for your device.
not working
it keeps on saying waiting for device n does not proceed further
i tried installing the drivers again but that doesnt help either
pls help me out
I use fastboot flasher for this.. this tool is good .
sush93 said:
it keeps on saying waiting for device n does not proceed further
i tried installing the drivers again but that doesnt help either
pls help me out
Click to expand...
Click to collapse
"Waiting for Device" at fastboot usually related to bootloader driver. You need Android USB Driver
See : http://developer.android.com/sdk/win-usb.html
Hi folks,
I've bought my One V in late may and I had 2.08 ROM.
Now I've tested some roms and I wanted to revert back to stock rom.
I've downloaded RUU_PRIMO_U_ICS_40A_HTC_Europe_2.08.401.2_Radio_20.72.30.0833U_3831.17.00.18_M_release_263376_signed, and got recovery_signed and boot_signed images. Then I've went to fastboot, did flash recovery and boot partitions, and oem locked bootloader. Afterwards I booted my phone and entered PIN. Then I fired up RUU*.exe file, and I have 155 error. What the heck? Something I missed?
greetings!
run the ruu in hboot..
Sent from my HTC One V
thevilish said:
Hi folks,
I've bought my One V in late may and I had 2.08 ROM.
Now I've tested some roms and I wanted to revert back to stock rom.
I've downloaded RUU_PRIMO_U_ICS_40A_HTC_Europe_2.08.401.2_Radio_20.72.30.0833U_3831.17.00.18_M_release_263376_signed, and got recovery_signed and boot_signed images. Then I've went to fastboot, did flash recovery and boot partitions, and oem locked bootloader. Afterwards I booted my phone and entered PIN. Then I fired up RUU*.exe file, and I have 155 error. What the heck? Something I missed?
greetings!
Click to expand...
Click to collapse
Flashing RUU to revert to stock
- you must have the correct RUU for your device.
- if you are not sure, download CID Getter from Play Store and run it, it will show your CID.
- with your CID, you may be able to find a correct RUU for your device
then (even though some people may not agree with this, but this will bring no harm and it is noob-proof) do this:
1- flash a stock recovery.img
fastboot flash recovery recovery_signed.img
fastboot reboot-bootloader
fastboot erase cache
2- flash a stock boot.img
fastboot flash boot boot_signed.img
fastboot reboot-bootloader
fastboot erase cache
3- re-lock bootloader
fastboot oem lock
fastboot reboot-bootloader
fastboot erase cache
4- flash RUU
NOTE: There is no boot/reboot and enter pin in between.
paarthdesai said:
run the ruu in hboot..
Sent from my HTC One V
Click to expand...
Click to collapse
I've done this before and didn't succeeded, but now it works! Magic
Thanks a lot!
help
CafeKampuchia said:
Before you start, you will need to set up your computer to properly recognize the phone. You probably did this when rooting originally, but just in case... Install SDK tools for Android, Java runtime, and HTC Sync.
About HTC Sync: The only reason you need HTC Sync installed is for the USB drivers that come with it. But the program itself has been known to cause conflicts. Make sure that HTC Sync is not running in the background by opening Task Manager in Windows and killing it if you find it lurking in there.
Here we go:
1. Download the correct RUU for your device from Football's Primo Shipped ROM Collection.
2. Charge the battery above 50% or for at least one hour. If the battery dies during the flashing process, you could hard brick the phone!
3. Run the RUU until the wizard comes up. While the RUU wizard is open, find the temporary folder it created. (Open Explorer in Windows and type %temp% in the navigation bar.) There will be two folders with long encrypted names. In one of them you will find ROM.zip. Open it with 7zip and extract recovery.img or recovery_signed.img. Put it in the location were you've installed Android SDK tools. This is the stock HTC Recovery and it is needed to run the RUU.
4. Boot the phone into bootloader (power off, hold down volume and press power) and highlight FASTBOOT/B] using the volume rocker and pressing power. Then connect the USB cable. You should see FASTBOOT USB.
5. Open a command prompt in Windows and navigate to the folder where you installed Android SDK tools. Flash the stock recovery extracted in step 3 above using the following command:
Code:
fastboot flash recovery recovery.img
or
Code:
fastboot flash recovery recovery_signed.img
6. Relock the bootloader using the following command:
Code:
fastboot oem lock
7. Re-run the RUU. It will restore the device to it's original condition, locked (though *** RELOCKED ***) and unrooted.
Once the install is done you'll have unlock the bootloader again using the token you already have from the first time, reflash CWM Recovery and re-root. All this will be 10x easier than the first time.
If you do re-root your phone, be 100% you backup the stock ROM in ClockworkMod Recovery before making changes!
Click to expand...
Click to collapse
PLEASE HELP!
The 5th point does not work for me. I can not run the code.
What can i do?
what do you mean by navigate to the folder where you installed sdk?
brandoncoronado said:
what do you mean by navigate to the folder where you installed sdk?
Click to expand...
Click to collapse
It means that if you installed SDK in c:/android, then u must type.in the command prompt: cd c:/android and hit enter
Cheers
Sent from my HTC One V using xda app-developers app
brandoncoronado said:
what do you mean by navigate to the folder where you installed sdk?
Click to expand...
Click to collapse
where the fastboot.exe is located and stock recovery must be in the same folder for the command to work
[ask] Error 155
hey guys, ive been reading all tutorial for reverting to stock RUU.
the first time i tried, it works prefectly.
then after a few weeks, i tried to revert to stock RUU, it failed .
it show error 155.
i already flash the boot , recovery that i found inside the stock RUU, also I've relock the phone.
but when i relock the phone, it show "info Lock successfully , status read failed no such file / directory"
when i enter bootloader, it show that my device already "relocked"
does the relocked proses is successfully ?
iam running PrimoU 2.09.707.1 with stock bootloader, CWM recovery, and rooted ..
I did exactly as it is mentioned but at the end where there is vertical progress bar it gives me an error of customer Id... Failed to update. What shud i do. How do I check what my customer Id is I can't Download it from play store coz can't boot into normal screen... How do I make ruu and cid same.
Sent from my Galaxy Nexus using xda app-developers app
Hi
I bought my wfs in poland (sorry for my english and mistakes). I have problem because I updated my phone to 2.26.401.3 in phone jumped message about new soft and I update. Now I unlocked bootloader with htcdev and when I go into recovery (cwm installed by rom manager) I have black screen and under screen leds are light. I tried this but this isn't working now i downgraded phone to 2.13.401.3 and recovery (cwm) still not working. I tried another recovery but no one working. I want install new rom. What do? Can I install custom rom without recovery? or any solutions of this problem?
I had very similar problems, and could not find any solution, so I created custom recovery.img with appropriate kernel. Download attached recovery.img and using fastboot burn it:
$ fastboot flash recovery recovery,img
Phone needs to be in "fastboot usb" mode. Let me know if you have problems with it. Works for me.
lanaczko said:
I had very similar problems, and could not find any solution, so I created custom recovery.img with appropriate kernel. Download attached recovery.img and using fastboot burn it:
$ fastboot flash recovery recovery,img
Phone needs to be in "fastboot usb" mode. Let me know if you have problems with it. Works for me.
Click to expand...
Click to collapse
Dint work for me dude. Recovery is still a blank screen.
rajanand made a thread about this last time look for it and it works
ngoralph said:
rajanand made a thread about this last time look for it and it works
Click to expand...
Click to collapse
Thankyou! Found his post. I shall give it a shot now. Cheers
it dint work for me .. do you know any other way to get rid of this black screen on recovery.. or atleast findout the reason behind such a thing.
[TUTORIAL] How to Install ClockworkMod Recovery on wildfire s
I Hope you have SDK tools for Android, Java runtime, and HTC Sync installed on your Windows PC. After unlocking the bootloader and rooted your device follow this:
(Note: You only need to install HTC Sync for the drivers that come with it. But the program sometimes causes conflicts, so during this procedure, make sure it is not running. Open Task Manager in Windows and kill it. If you don’t use HTC Sync, you may also open Control Panel and uninstall it without uninstalling the drivers.)
[OPTIONAL] Update Android software version to 2.3.5
If you have a Marvel/A510e, It is recommended updating to 2.3.5 before proceeding (if possible), though you can root a 2.3.3 device. If you decide to root 2.3.3 now and install 2.3.5 later, you’ll loose your root, cwm and have to do it again.
Make sure the phone is connected in Charge only mode. Enable USB debugging by going to Settings > Applications > Development > USB. Also Disable "Fast boot" by go to Settings>Power>uncheck "Fast boot".
1. Download the official 5.0.2.8 image at ClockworkMod’s index of recoveries here: http://www.clockworkmod.com/rommanager/
Make sure you choose the right one for your device whether Marvel or MarvelC. If you downloaded the zip version, extract the img file from the zip you just downloaded.
2. Boot the phone into HBOOT. After it scans for PG7610.zip, select 'FASTBOOT' and press the <Power> button then connect the USB cable. The word 'FASTBOOT' will change into 'FASTBOOT USB'. If not, then either your USB drivers for the Wildfire S or Android SDK Tools is not installed properly.
3. Open command prompt in Windows and navigate to the folder where you extracted the recovery image in step 1.
4. Type the following command: fastboot flash recovery [image name.img]. For example:
c:\android\>fastboot flash recovery recovery-clockwork-5.0.2.8-marvel.img
Try the above method, if it fails then go down:
It's a full version, so just download the .zip put it in sdcard then replace battery, press <power> with Vol Down.
http://forum.xda-developers.com/showthread.php?t=1213229
____________________________________________
Hope this may be useful. (If really, Just press 'Thanks').
http://forum.xda-developers.com/showthread.php?t=1781105 this will work i bet ya dont say thanks just click it
cant work for me dear senior
Senthamil said:
I Hope you have SDK tools for Android, Java runtime, and HTC Sync installed on your Windows PC. After unlocking the bootloader and rooted your device follow this:
(Note: You only need to install HTC Sync for the drivers that come with it. But the program sometimes causes conflicts, so during this procedure, make sure it is not running. Open Task Manager in Windows and kill it. If you don’t use HTC Sync, you may also open Control Panel and uninstall it without uninstalling the drivers.)
[OPTIONAL] Update Android software version to 2.3.5
If you have a Marvel/A510e, It is recommended updating to 2.3.5 before proceeding (if possible), though you can root a 2.3.3 device. If you decide to root 2.3.3 now and install 2.3.5 later, you’ll loose your root, cwm and have to do it again.
Make sure the phone is connected in Charge only mode. Enable USB debugging by going to Settings > Applications > Development > USB. Also Disable "Fast boot" by go to Settings>Power>uncheck "Fast boot".
1. Download the official 5.0.2.8 image at ClockworkMod’s index of recoveries here: http://www.clockworkmod.com/rommanager/
Make sure you choose the right one for your device whether Marvel or MarvelC. If you downloaded the zip version, extract the img file from the zip you just downloaded.
2. Boot the phone into HBOOT. After it scans for PG7610.zip, select 'FASTBOOT' and press the <Power> button then connect the USB cable. The word 'FASTBOOT' will change into 'FASTBOOT USB'. If not, then either your USB drivers for the Wildfire S or Android SDK Tools is not installed properly.
3. Open command prompt in Windows and navigate to the folder where you extracted the recovery image in step 1.
4. Type the following command: fastboot flash recovery [image name.img]. For example:
c:\android\>fastboot flash recovery recovery-clockwork-5.0.2.8-marvel.img
Try the above method, if it fails then go down:
It's a full version, so just download the .zip put it in sdcard then replace battery, press <power> with Vol Down.
http://forum.xda-developers.com/showthread.php?t=1213229
____________________________________________
Hope this may be useful. (If really, Just press 'Thanks').
Click to expand...
Click to collapse
cant work for me dear
i have a marvel unlocked s on wildfire s.
i can't root my phone because when i go into the recovery mode, the black screen comes up with the 4 lighting keys. i don't know what to do. i read the related posts but nothing seems to help. could you guys please help.. i unlocked my phone for rooting and now i can't do anything.
You can root your phone by using the HTC super tool, just google for it.
I assume you have stock recovery on your phone, then you actually can't really use that recovery. You should try to root it with supertool
and then install CWM with ROM Manager
I hope this came in handy for you!
Sent from my VegaCream RC2 using xda premium
MrGuyFawkes said:
You can root your phone by using the HTC super tool, just google for it.
I assume you have stock recovery on your phone, then you actually can't really use that recovery. You should try to root it with supertool
and then install CWM with ROM Manager
I hope this came in handy for you!
Sent from my VegaCream RC2 using xda premium
Click to expand...
Click to collapse
i tried the supertool but it doesn't work. i tried everything even the clockworkmode recovery, the flashing of cwm works perfectly fine but the recovery mode doesn't show up so that i can install from sd card. only a black screen with key lighted comes up. i tried the things given in the black screen recovery article of xda .. but nothing seems to help. could you help me out to see through this. my moms htc wildfire s which is one year old works perfectly fine but the problem is with my new one.. i also heard that lot of people are experiencing the same.
After unlocking, you have to root the device first then install CWM and take a nandroid backup thru Recovery option.
For rooting you can also use root.zip method. just google it.
To flash CWM, goto Hboot menu and select fastboot, then goto cmd (command prompt) on pc try using fastboot commands to flash boot.img, system.img and recovery.img.
Hope this may be useful.....
Senthamil said:
After unlocking, you have to root the device first then install CWM and take a nandroid backup thru Recovery option.
For rooting you can also use root.zip method. just google it.
To flash CWM, goto Hboot menu and select fastboot, then goto cmd (command prompt) on pc try using fastboot commands to flash boot.img, system.img and recovery.img.
Hope this may be useful.....
Click to expand...
Click to collapse
bro,
i tried the root.zip method. i copied the zip file on the memory card and then went to hboot. but then i found the error which is : CID ERROR
PRESS POWER BUTTON TO REBOOT.
this is what i get.
i have a s-on unlocked marvel a510e. please help..
ok. now try this way! which helped me to solve the same issue.....
forum.xda-developers.com/showpost.php?p=21891784&postcount=1
hope this may be useful......(if really, press thanks).
Senthamil said:
ok. now try this way! which helped me to solve the same issue.....
forum.xda-developers.com/showpost.php?p=21891784&postcount=1
hope this may be useful......(if really, press thanks).
Click to expand...
Click to collapse
bro, this time i flashed the PG76IMG.zip files but when i go into the recovery to flash install from root.zip, the same black screen comes up. this is the problem which i have been having.. the black screen on recovery which makes us do nothing at all..
i think a new custom recovery has to be made for the htc wildfire s inorder to prevent the black screen on recovery. or does anyone know how to root wildfires without the need to go into any custom recovery mode. please help .. this has become a real problem.. i really wish there was a way.
aryan41 said:
bro, this time i flashed the PG76IMG.zip files but when i go into the recovery to flash install from root.zip, the same black screen comes up. this is the problem which i have been having.. the black screen on recovery which makes us do nothing at all..
Click to expand...
Click to collapse
Maybe you need to downgrade your stock ROM (if you still can boot it up so to say).
Look for a RUU for WFS and try to downgrade/upgrade HBOOT and such to an older/newer version.
Sorry that I can't post any links too RUUs, I'm on my phone.
But there is a tread with these in the Dev section I think, but if they don't work you can just google for them.
tbh I have a similar problem with my bro's WFS, I can't even unlock it because of wrong versions a such so I think your problem could be related to this.
Sent from my VegaCream RC2 using xda premium
Choose the right recovery image....
aryan41 said:
i think a new custom recovery has to be made for the htc wildfire s inorder to prevent the black screen on recovery. or does anyone know how to root wildfires without the need to go into any custom recovery mode. please help .. this has become a real problem.. i really wish there was a way.
Click to expand...
Click to collapse
I think you you've chosen the wrong cwm. Chose the right one here :
http://forum.xda-developers.com/showthread.php?t=1213229
download PG76IMG.zip and you need to install it using fastboot, it will not work using the zip file from your sd card. Make sure you delete that file before attempting what is below (adapted from CafeKampuchia's guide on rooting).
You will need SDK tools for Android, Java runtime, and HTC Sync installed on your Windows computer. Install the SDK tools in a directory named something like c:\android. Put the recovery image in this directory, too, not the zip file.
Boot the phone into HBOOT by turning the phone off, removing the battery, replacing the battery then holding down the power key and volume button. After it scans for PG7610.zip, select FASTBOOT and press the power button then connect the USB cable. The word FASTBOOT will change into FASTBOOT USB. If not, then either your USB drivers for the Wildfire S or Android SDK Tools is not installed properly.
Open a command prompt in Windows and navigate to c:\android
Type the following command: fastboot flash recovery [image name.img]. For example:
c:\android\>fastboot flash recovery recovery-clockwork-5.0.2.8-marvel.img
Hope this will install ClockworkMod recovery properly. (If really press 'thank').
Senthamil said:
I think you you've chosen the wrong cwm. Chose the right one here :
http://forum.xda-developers.com/showthread.php?t=1213229
download PG76IMG.zip and you need to install it using fastboot, it will not work using the zip file from your sd card. Make sure you delete that file before attempting what is below (adapted from CafeKampuchia's guide on rooting).
You will need SDK tools for Android, Java runtime, and HTC Sync installed on your Windows computer. Install the SDK tools in a directory named something like c:\android. Put the recovery image in this directory, too, not the zip file.
Boot the phone into HBOOT by turning the phone off, removing the battery, replacing the battery then holding down the power key and volume button. After it scans for PG7610.zip, select FASTBOOT and press the power button then connect the USB cable. The word FASTBOOT will change into FASTBOOT USB. If not, then either your USB drivers for the Wildfire S or Android SDK Tools is not installed properly.
Open a command prompt in Windows and navigate to c:\android
Type the following command: fastboot flash recovery [image name.img]. For example:
c:\android\>fastboot flash recovery recovery-clockwork-5.0.2.8-marvel.img
Hope this will install ClockworkMod recovery properly. (If really press 'thank').
Click to expand...
Click to collapse
i dont think that would work i've tried every recovery i've found here and still black screen you may want to downgrade your kernel after unlock of bootloader then use superoneclick. if not working look for my post before which uses taco root to root the device
Senthamil said:
I think you you've chosen the wrong cwm. Chose the right one here :
http://forum.xda-developers.com/showthread.php?t=1213229
download PG76IMG.zip and you need to install it using fastboot, it will not work using the zip file from your sd card. Make sure you delete that file before attempting what is below (adapted from CafeKampuchia's guide on rooting).
You will need SDK tools for Android, Java runtime, and HTC Sync installed on your Windows computer. Install the SDK tools in a directory named something like c:\android. Put the recovery image in this directory, too, not the zip file.
Boot the phone into HBOOT by turning the phone off, removing the battery, replacing the battery then holding down the power key and volume button. After it scans for PG7610.zip, select FASTBOOT and press the power button then connect the USB cable. The word FASTBOOT will change into FASTBOOT USB. If not, then either your USB drivers for the Wildfire S or Android SDK Tools is not installed properly.
Open a command prompt in Windows and navigate to c:\android
Type the following command: fastboot flash recovery [image name.img]. For example:
c:\android\>fastboot flash recovery recovery-clockwork-5.0.2.8-marvel.img
Hope this will install ClockworkMod recovery properly. (If really press 'thank').
Click to expand...
Click to collapse
first u need adb.exe, adbwinapi.dll, fastboot.exe in that c:\android\
u need a command in cmd to navigate. "cd c:\android"
yeah other than that its pretty complete. See the post he referring to. I remember using this post to root mine.
androidforums.com/wildfire-s-all-things-root/480954-guide-how-root-wildfire-s-s-finally.html
Try my all in one tool here: http://forum.xda-developers.com/showthread.php?t=1697985
It will work
Senthamil said:
I think you you've chosen the wrong cwm. Chose the right one here :
http://forum.xda-developers.com/showthread.php?t=1213229
download PG76IMG.zip and you need to install it using fastboot, it will not work using the zip file from your sd card. Make sure you delete that file before attempting what is below (adapted from CafeKampuchia's guide on rooting).
You will need SDK tools for Android, Java runtime, and HTC Sync installed on your Windows computer. Install the SDK tools in a directory named something like c:\android. Put the recovery image in this directory, too, not the zip file.
Boot the phone into HBOOT by turning the phone off, removing the battery, replacing the battery then holding down the power key and volume button. After it scans for PG7610.zip, select FASTBOOT and press the power button then connect the USB cable. The word FASTBOOT will change into FASTBOOT USB. If not, then either your USB drivers for the Wildfire S or Android SDK Tools is not installed properly.
Open a command prompt in Windows and navigate to c:\android
Type the following command: fastboot flash recovery [image name.img]. For example:
c:\android\>fastboot flash recovery recovery-clockwork-5.0.2.8-marvel.img
Hope this will install ClockworkMod recovery properly. (If really press 'thank').
Click to expand...
Click to collapse
i used the exact same version of clockworkmode recovery. the problem is not with the recovery i think its with my phone. and i tried downgrading the hboot using ruu but the problem still exists ... that is the black screen on recovery.
rezo609 said:
Try my all in one tool here: http://forum.xda-developers.com/showthread.php?t=1697985
It will work
Click to expand...
Click to collapse
bro, my wildfire s is the new one with the black screen on recovery problem, are u sure this utility will work the new phones also..?
rezo609 said:
Try my all in one tool here: http://forum.xda-developers.com/showthread.php?t=1697985
It will work
Click to expand...
Click to collapse
bro, i tried this but failed. i can't get the recovery screen where i have to select install from sd card. this is my problem .. i don't get the recovery screen instead i get a black screen.
Is your phone a marvelc ?
no it is marvel
i wish some one could come up with custom recovery which doesn't lead into this black recovery screen. please help.. isn't there any other way ?
please help rezo
rezo609 said:
Is your phone a marvelc ?
Click to expand...
Click to collapse
bro, isn't there any other way to root my wildfire s.. without ending up in the black recovery screen.. please help.. i am losing all hope..