Develop Bugs

Is there anyway to update PRL and Profile on CM9?

I'm running Alpha 6 and wanted to update my the PRL and Profile after installing CM9 because I also updated the radio to FF18.

try reprovisioning the phone?
http://forum.xda-developers.com/showpost.php?p=26131653&postcount=4244

lrrowley said:
I'm running Alpha 6 and wanted to update my the PRL and Profile after installing CM9 because I also updated the radio to FF18.
Click to expand...
Click to collapse
If I'm not mistaken you have to flash back to either stock or a gb rom that allows updating prl and stuff, update then flash back, but I also remember reading something bout long work arounds, you may have to do some Googling to find those
Or here, just found this hope it helps
http://forum.xda-developers.com/showthread.php?p=26792719
sent from my SGS2 running AOKP, eh...

tool2269 said:
try reprovisioning the phone?
http://forum.xda-developers.com/showpost.php?p=26131653&postcount=4244
Click to expand...
Click to collapse
I can confirm that this works.
Sent from my SPH-D710 using xda premium

Venomusdragon said:
If I'm not mistaken you have to flash back to either stock or a gb rom that allows updating prl and stuff, update then flash back, but I also remember reading something bout long work arounds, you may have to do some Googling to find those
Or here, just found this hope it helps
http://forum.xda-developers.com/showthread.php?p=26792719
sent from my SGS2 running AOKP, eh...
Click to expand...
Click to collapse
+1. Used Mobile ODIN to temporary boot to EL29 stock rom just last week & updated my PRL/fixed my GPS lock fine via this method. After watching/rewatching the video just to make sure I had all my files, it took maybe about 10 minutes at the most to do it and reflash back to CM9.
Hope you get that PRL update working OP!

In the future theres a temp el29 that was made a little while ago that'll save you some time and effort, it accomplishes the same thing....
Sent from my SPH-D710 using xda app-developers app

Hey thanks everyone for the tips I really appreciate it!

[Q] Cannot update PRL or profile

I recently reverted back to stock recovery using the toolkit coming from CWM. I tried updating PRL or profile and I get the following error.
The PRL update could not be completed
...
Error: Connection Error (6500)
I used Triangle Away to see if that had something to do with it but no luck. Any suggestions?

Bump. Any suggestions would be appreciated.
Sent from my SPH-L900 using xda app-developers app

iamamutt said:
Bump. Any suggestions would be appreciated.
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
odin to stock, try updating your profile, then prl

i get this same error as well. Tried the odin back to stock but it didnt help.
JD

JudasD said:
i get this same error as well. Tried the odin back to stock but it didnt help.
JD
Click to expand...
Click to collapse
call sprint

skyjedi said:
call sprint
Click to expand...
Click to collapse
I did. They told me to visit my nearest repair center. That is always sprints answer to me because i live within 5 miles of 3 different facilities.
JD

JudasD said:
I did. They told me to visit my nearest repair center. That is always sprints answer to me because i live within 5 miles of 3 different facilities.
JD
Click to expand...
Click to collapse
i would do that then, IF you odin'ed back to stock and it still doesn't work there is something wrong with your phone.

Has either of you with problems tried to reset everything or ##786# reset
Sent from my SPH-L900 using xda premium

iamamutt said:
I recently reverted back to stock recovery using the toolkit coming from CWM. I tried updating PRL or profile and I get the following error.
The PRL update could not be completed
...
Error: Connection Error (6500)
I used Triangle Away to see if that had something to do with it but no luck. Any suggestions?
Click to expand...
Click to collapse
I think its a sprint issue. A lot of times when I flash a new ROM it will do that before data has a solid connection you can try the sprint diagnostics app. All credits go to big rush dog and team eos. I'll post a link for you as soon as I upload it to my drop box. Please visit the team eos thread in the spring gnex forums and thank big rush dog.
Edit: here's your link. Just flash it in recovery, and it will install the app.
http://db.tt/0IJxt0vi
Sent from my Galaxy Nexus using Tapatalk 2

skyjedi said:
i would do that then, IF you odin'ed back to stock and it still doesn't work there is something wrong with your phone.
Click to expand...
Click to collapse
I have the same problem as well...Nuthin wrong with the phone at all...When I reboot I just cancel out and let it reboot...I can update the PRL tho just not Profile...I read that not being to update profile would have an effect on LTE...But we just got LTE where Im at and Im smokin in the mid to high 20's Mbps...so I can see that not updating the Profile had no effect at all...Im doin the new JB Domination Rom 10.2 today...And Im gonna Reodin today just for the Hell of it and do a clean Wipe for the new Rom and see what happens... Ill try to update Profile while at stock before Root and see what happens...But the way Ive been runnin now it dosen't phase me at all...So if it goes back to the way it was...Its really no problem...And like somebody said it could be on Sprints end as well...But theres no way I would return the Phone to the store...

iamamutt said:
I recently reverted back to stock recovery using the toolkit coming from CWM. I tried updating PRL or profile and I get the following error.
The PRL update could not be completed
...
Error: Connection Error (6500)
I used Triangle Away to see if that had something to do with it but no luck. Any suggestions?
Click to expand...
Click to collapse
Try putting your network settings on CDMA only, reboot, try updating profile again...

It was sprint. I was able to update PRL this morning. I had restored my TWRP backup after using odin so my rom/data was not the culprit.
JD

JudasD said:
It was sprint. I was able to update PRL this morning. I had restored my TWRP backup after using odin so my rom/data was not the culprit.
JD
Click to expand...
Click to collapse
Yep you can update PRL...But not Profile...

ronny71 said:
Yep you can update PRL...But not Profile...
Click to expand...
Click to collapse
I was able to update both today.
JD

It turns out my issue was with having AdBlock installed.

iamamutt said:
It turns out my issue was with having AdBlock installed.
Click to expand...
Click to collapse
Yes, I can confirm that AdBlock was the culprit for me as well. I am trying to figure out whether it is also preventing me from downloading MMS in Hangouts.

Need help setting up phone with CM10.0

Just installed CM10.0 on my phone. I used the sprint version, but have a problem.. I do not have any service data or mobile.. is there a way to update your profile like you do with the normal rom that came on the phone, so I can get my service.. Thanks

Also having the same issue. I was gonna post a thread but I figured I'd just search for it when I get home.
That way I don't get yelled at by the forum trolls.
Sent from my Sprint Galaxy S3 using xda premium

You cant update profile on an AOSP (android open source project) rom. Try flashing the CM10 rom again, but this time wipe everything a couple more times before you do that
Sent from my PG06100

To update PRL and Profile you need to nandroid you cm10 flash TW rom update both then restore your nandroid.
I like to break stuff!

doubledragon5 said:
Just installed CM10.0 on my phone. I used the sprint version, but have a problem.. I do not have any service data or mobile.. is there a way to update your profile like you do with the normal rom that came on the phone, so I can get my service.. Thanks
Click to expand...
Click to collapse
eyeisdasteve said:
Also having the same issue. I was gonna post a thread but I figured I'd just search for it when I get home.
That way I don't get yelled at by the forum trolls.
Sent from my Sprint Galaxy S3 using xda premium
Click to expand...
Click to collapse
As was stated, to update profile/prl, when on an AOSP rom, you have to flash back to a TW rom, perform the action, and then flash to your preferred AOSP rom. If you're using a slightly older AOSP rom, you may want to search for the Sprint data handoff link and download it, save it as you would other root files, and flash it after flashing your preferred rom and kernal. I've found the data handoff fix to be very helpful, especially since I'm in a fully lit LTE area.
Good luck.

Factory reset leaves info? Fix?

Hey I'm trying to sell my S3 and after a factory reset and wiping everything in TWRP my name, email address and phone number is still under About device/Status. How do you remove this info? I really don't feel comfortable selling it to a stranger with all that info remaining is there a better wiping method? I'm not finding this anywhere. Thanks in advance.
Sent from my SPH-L710 using xda premium

This gets set when you activate. You may be able to clear it with ##rtn# but you will need your msl.
Sent from my SPH-L710 using xda app-developers app

m20120 said:
This gets set when you activate. You may be able to clear it with ##rtn# but you will need your msl.
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
Is it a hassle to obtain your msl? When I had an HTC evo lte it was as simple as running an app with root permissions.
w
Edit : the only is on MB1 and per this thread http://forum.xda-developers.com/showthread.php?t= I need to downgrade and flash an LJ7 ROM which will let me get the code via terminal. So after I obtain my MSL I just go in the settings and delete my info right?
Sent from my SPH-L710 using xda premium

xbmoyx said:
Is it a hassle to obtain your msl? When I had an HTC evo lte it was as simple as running an app with root permissions.
w
Edit : the only is on MB1 and per this thread http://forum.xda-developers.com/showthread.php?t= I need to downgrade and flash an LJ7 ROM which will let me get the code via terminal. So after I obtain my MSL I just go in the settings and delete my info right?
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
Search on general, there are several pretty easy methods to do it

xbmoyx said:
Is it a hassle to obtain your msl? When I had an HTC evo lte it was as simple as running an app with root permissions.
w
Edit : the only is on MB1 and per this thread http://forum.xda-developers.com/showthread.php?t= I need to downgrade and flash an LJ7 ROM which will let me get the code via terminal. So after I obtain my MSL I just go in the settings and delete my info right?
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
You are correct about the downgrade to get the MSL. There is a root app but it stopped working a while ago. I know that under the ##rtn# screen there is an option to Reset the activation data but I am not positive that will clear the phone number.

m20120 said:
You are correct about the downgrade to get the MSL. There is a root app but it stopped working a while ago. I know that under the ##rtn# screen there is an option to Reset the activation data but I am not positive that will clear the phone number.
Click to expand...
Click to collapse
Yeah I'm not certain either yet but under edit in ##DATA# or ##rtn# it seems like you able to maybe add all 0's (I hope) for my cell and make a fake email.
Sent from my SPH-L710 using xda premium

Ahh so simply flashing an LJ7 ROM while currently on MB1 doesn't downgrade? I've found this http://www.android.gs/downgrade-sprint-galaxy-s3-jelly-bean-stock-rom/ and it says to use ClockworkMOD recovery but im currently on TWRP. Will TWRP work or is there an easier way to execute this? I flashed an old The Peoples ROM but it still shows me being on MB1. Will flashing a firmware only zip fix this?
Sent from my SPH-L710 using xda premium

xbmoyx said:
Ahh so simply flashing an LJ7 ROM while currently on MB1 doesn't downgrade? I've found this http://www.android.gs/downgrade-sprint-galaxy-s3-jelly-bean-stock-rom/ and it says to use ClockworkMOD recovery but im currently on TWRP. Will TWRP work or is there an easier way to execute this? I flashed an old The Peoples ROM but it still shows me being on MB1. Will flashing a firmware only zip fix this?
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
I've done this before to sell my Sprint S3 and can confirm that the dialer method does not work when rooted. In oder to do what you're requesting you'll need to transfer your account to another device. After doing this, the best way to clear out your info on the S3 and sell it is to
1) download the app "Get My MSL". It will most likely give you an error when tapping the "Get My MSL" option in the app at first.
2) open dialer and enter ##DATA#
3) When prompted to enter MSL code just choose any single digit number and enter it 6 times
4) once the popup message appears go immediately back into the "Get My MSL" app and select the option again and it will give you your MSL code. Make sure to save the code somewhere safe.
5) Now that you have your code, ODIN your phone back to complete 100% stock with the LJ7 stock tar file.
6) Once done, skip through the setup wizard upon first boot up and go straight into your dialer and enter ##786#
7) select "Reset" then enter MSL and hit "OK" .
8) select "OK" again on the "Reset to manufacture defaught" popup. It will reboot your phone.
9) Let it do it's thing in stock recovery and once booted up cancel the hands free activation and everything should be cleared out in "About Phone" in settings.
Sent from my Nexus 4 using xda premium

LuigiBull23 said:
I've done this before to sell my Sprint S3 and can confirm that the dialer method does not work when rooted. In oder to do what you're requesting you'll need to transfer your account to another device. After doing this, the best way to clear out your info on the S3 and sell it is to
1) download the app "Get My MSL". It will most likely give you an error when tapping the "Get My MSL" option in the app at first.
2) open dialer and enter ##DATA#
3) When prompted to enter MSL code just choose any single digit number and enter it 6 times
4) once the popup message appears go immediately back into the "Get My MSL" app and select the option again and it will give you your MSL code. Make sure to save the code somewhere safe.
5) Now that you have your code, ODIN your phone back to complete 100% stock with the LJ7 stock tar file.
6) Once done, skip through the setup wizard upon first boot up and go straight into your dialer and enter ##786#
7) select "Reset" then enter MSL and hit "OK" .
8) select "OK" again on the "Reset to manufacture defaught" popup. It will reboot your phone.
9) Let it do it's thing in stock recovery and once booted up cancel the hands free activation and everything should be cleared out in "About Phone" in settings.
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
Awesome thanks! I'm selling my phone with it rooted though can I do this and wipe all information and just flash a stock ROM? Do I have to ODIN back to stock LJ7 to completely wipe my phone and email address or can this be done with MB1? I was on The Peoples ROM MB1 and flashed an old LJ7 ROM but it still says MB1 baseband in the settings, will this still work? I don't have WiFi access to check if this worked I will this afternoon. Thanks for your help!
Sent from my SPH-L710 using xda premium

xbmoyx said:
Awesome thanks! I'm selling my phone with it rooted though can I do this and wipe all information and just flash a stock ROM? Do I have to ODIN back to stock LJ7 to completely wipe my phone and email address or can this be done with MB1? I was on The Peoples ROM MB1 and flashed an old LJ7 ROM but it still says MB1 baseband in the settings, will this still work? I don't have WiFi access to check if this worked I will this afternoon. Thanks for your help!
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
The build number for the firmware (aka modem/radio) is separate from the build number of the rom itself. Go into the dev section and search for a the LJ7 modem and flash that

xbmoyx said:
Awesome thanks! I'm selling my phone with it rooted though can I do this and wipe all information and just flash a stock ROM? Do I have to ODIN back to stock LJ7 to completely wipe my phone and email address or can this be done with MB1? I was on The Peoples ROM MB1 and flashed an old LJ7 ROM but it still says MB1 baseband in the settings, will this still work? I don't have WiFi access to check if this worked I will this afternoon. Thanks for your help!
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
Follow the procedure above actually to the dot. Why? because If you try doing this while being rooted I GAURANTEE you will have problems and will wind up coming back here asking for help again but this time with another issue. To save you the trouble I highly recommend following the steps above. ODIN back to complete 100% stock LJ7. I've heard of some people not having much success trying this on MB1 but I haven't tried it myself as I am no longer with Sprint but I still support the forums. The last I have tried it on was on LJ7 and I along with many others have had success on that build so LJ7 would be your best bet. Modem and build are separate but flashing a tar file through ODIN will update everything, including the modem back to LJ7. If you wanna sell the phone rooted on the latest firmware then again follow the steps and after you've gotten through the last step, make sure to be connected to wifi so you may receive the MB1 update and then FINALLY root it. It may sound like a lot to do but it's really not.. so long as you know exactly what you're doing. Following this procedure is not only your safest way in selling a phone but it's also the BEST way to fully clear your ESN! (even after deactivation) Like I said I did this and my buyer was 100% satisfied.
Good luck!
Sent from my Nexus 4 using xda premium

LuigiBull23 said:
Follow the procedure above actually to the dot. Why? because If you try doing this while being rooted I GAURANTEE you will have problems and will wind up coming back here asking for help again but this time with another issue. To save you the trouble I highly recommend following the steps above. ODIN back to complete 100% stock LJ7. I've heard of some people not having much success trying this on MB1 but I haven't tried it myself as I am no longer with Sprint but I still support the forums. The last I have tried it on was on LJ7 and I along with many others have had success on that build so LJ7 would be your best bet. Modem and build are separate but flashing a tar file through ODIN will update everything, including the modem back to LJ7. If you wanna sell the phone rooted on the latest firmware then again follow the steps and after you've gotten through the last step, make sure to be connected to wifi so you may receive the MB1 update and then FINALLY root it. It may sound like a lot to do but it's really not.. so long as you know exactly what you're doing. Following this procedure is not only your safest way in selling a phone but it's also the BEST way to fully clear your ESN! (even after deactivation) Like I said I did this and my buyer was 100% satisfied.
Good luck!
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
Ok cool. I flashed the LJ7 modem as well as being on an LJ7 ROM. If I still can't receive my MSL and complete the wipe via ##data# or ##rtn# I will ODIN back to stock as you said. Thanks everyone for the help!
Sent from my SPH-L710 using xda premium

xbmoyx said:
Ok cool. I flashed the LJ7 modem as well as being on an LJ7 ROM. If I still can't receive my MSL and complete the wipe via ##data# or ##rtn# I will ODIN back to stock as you said. Thanks everyone for the help!
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
I had a BIG problem doing this while rooted so if you do this while already rooted I wish you the best of luck but just know that I am not responsible for anything that may happen to your device.
Sent from my Nexus 4 using xda premium

LuigiBull23 said:
I had a BIG problem doing this while rooted so if you do this while already rooted I wish you the best of luck but just know that I am not responsible for anything that may happen to your device.
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
In that case haha I'm going to unroot and return to stock. Seems easy enough and thanks for the forewarning. I'm having problems finding a thread on here exactly showing how to restore back to stock LJ7. I don't want to seem incapable of finding it I'm just coming up dry do you have this thread saved to your favorites that you could share? I appreciate all the help!
EDIT: http://theunlockr.com/2012/07/28/how-to-unroot-sprint-samsung-galaxy-s3/ that guide seems like what I need.
Sent from my SPH-L710 using xda premium

xbmoyx said:
In that case haha I'm going to unroot and return to stock. Seems easy enough and thanks for the forewarning. I'm having problems finding a thread on here exactly showing how to restore back to stock LJ7. I don't want to seem incapable of finding it I'm just coming up dry do you have this thread saved to your favorites that you could share? I appreciate all the help!
EDIT: http://theunlockr.com/2012/07/28/how-to-unroot-sprint-samsung-galaxy-s3/ that guide seems like what I need.
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
That link doesn't exactly provide the firmware you're looking to flash. I have the correct one for you on my pc. I can upload you a mirror if you'd like.
Sent from my Nexus 4 using xda premium

LuigiBull23 said:
That link doesn't exactly provide the firmware you're looking to flash. I have the correct one for you on my pc. I can upload you a mirror if you'd like.
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
That would be nice of you man I appreciate it. Exactly which firmware do I need? I don't just need the original stock ROM to pull the .tar file? I had no problem rooting but unrooting sounds a little more difficult.
Sent from my SPH-L710 using xda premium

xbmoyx said:
That would be nice of you man I appreciate it. Exactly which firmware do I need? I don't just need the original stock ROM to pull the .tar file? I had no problem rooting but unrooting sounds a little more difficult.
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
not difficult at all. You can unroot back to any of the stock firmwares that have been released on the Sprint S3. The problem is that many of the links here are broken and I'm trying to prevent you from unrooting all the way back to an ICS stock firmware requiring you to accept 1 too many OTAs. So Like I said I recommend LJ7 but I just realized I actually did wind up deleting the LJ7 file on my pc when I switched to T-Mobile. My apologies but I did manage to find one of my subscribed threads that will return you back to stock MB1 without a pc. They are flashable zips, just like flashing any ROM, and the op says the MB1 issues have been fixed. Again, I wasn't able to test this out but it's intended to do the same work as ODIN so it's worth a shot and a much easier approach. Report back with your results and good luck!
http://forum.xda-developers.com/showthread.php?t=1904099
Sent from my Nexus 4 using xda premium
---------- Post added at 12:27 PM ---------- Previous post was at 12:19 PM ----------
LuigiBull23 said:
not difficult at all. You can unroot back to any of the stock firmwares that have been released on the Sprint S3. The problem is that many of the links here are broken and I'm trying to prevent you from unrooting all the way back to an ICS stock firmware requiring you to accept 1 too many OTAs. So Like I said I recommend LJ7 but I just realized I actually did wind up deleting the LJ7 file on my pc when I switched to T-Mobile. My apologies but I did manage to find one of my subscribed threads that will return you back to stock MB1 without a pc. They are flashable zips, just like flashing any ROM, and the op says the MB1 issues have been fixed. Again, I wasn't able to test this out but it's intended to do the same work as ODIN so it's worth a shot and a much easier approach. Report back with your results and good luck!
http://forum.xda-developers.com/showthread.php?t=1904099
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
Oh and as always do a nandroid backup
Sent from my Nexus 4 using xda premium

LuigiBull23 said:
not difficult at all. You can unroot back to any of the stock firmwares that have been released on the Sprint S3. The problem is that many of the links here are broken and I'm trying to prevent you from unrooting all the way back to an ICS stock firmware requiring you to accept 1 too many OTAs. So Like I said I recommend LJ7 but I just realized I actually did wind up deleting the LJ7 file on my pc when I switched to T-Mobile. My apologies but I did manage to find one of my subscribed threads that will return you back to stock MB1 without a pc. They are flashable zips, just like flashing any ROM, and the op says the MB1 issues have been fixed. Again, I wasn't able to test this out but it's intended to do the same work as ODIN so it's worth a shot and a much easier approach. Report back with your results and good luck!
http://forum.xda-developers.com/showthread.php?t=1904099
Sent from my Nexus 4 using xda premium
---------- Post added at 12:27 PM ---------- Previous post was at 12:19 PM ----------
Oh and as always do a nandroid backup
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
Ok so with my current state I'm on a LJ7 ROM and flashed the LJ7 modem, after I get my MSL number I should flash the Stock MB1 ROM method you just posted then continue with resetting back to manufacture settings in ##DATA# and I should be gold correct? I thank you once again for your help!
Sent from my SPH-L710 using xda premium

xbmoyx said:
Ok so with my current state I'm on a LJ7 ROM and flashed the LJ7 modem, after I get my MSL number I should flash the Stock MB1 ROM method you just posted then continue with resetting back to manufacture settings in ##DATA# and I should be gold correct? I thank you once again for your help!
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
First of all, in this case don't worry about flashing any modems. Also, ##DATA# is what you'll need in the beginning to obtain your MSL. ##RTN# or ##786# is what you'll be entering at the end to return to manufacture default. To keep it simple for you, just follow the same step by step procedure I posted in the previous page BUT once you get to step 5, replace that with the MB1 post above and once done proceed to step 6 and so on. As long as you follow my instructions correctly you should have no issues.
Sent from my Nexus 4 using xda premium

LuigiBull23 said:
First of all, in this case don't worry about flashing any modems. Also, ##DATA# is what you'll need in the beginning to obtain your MSL. To keep it simple for you, just follow the same step by step procedure I posted in the previous page BUT once you get to step 5, replace that with the MB1 post above and once done proceed to step 6 and so on. As long as you follow my instructions correctly you should have no issues.
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
Sounds good! When I get home and have WiFi access I'll hook all this up and report back! Thanks a lot.
Sent from my SPH-L710 using xda premium

No data metropcs?

ive tried EVERYTHINGin qpst tht i was supposed to do to get data but i still yet dont have any data this phone is flashed to metropcs and i tried every single version of android and still no data can someone please help or inbox me with help?? maybe we can do this through team viewer i need major help please!

felix787 said:
ive tried EVERYTHINGin qpst tht i was supposed to do to get data but i still yet dont have any data this phone is flashed to metropcs and i tried every single version of android and still no data can someone please help or inbox me with help?? maybe we can do this through team viewer i need major help please!
Click to expand...
Click to collapse
Have you tried an updated modem?
Sent from my SPH-D710BST using xda premium

im on cm10.1 GB27 baseband

Anyone help please??!?

felix787 said:
im on cm10.1 GB27 baseband
Click to expand...
Click to collapse
There's your problem. Flash an ICS baseband.
Sent from my SPH-D710 using xda app-developers app

as a metter fact i just went to an ics rom and is ics baseband still no data =/

felix787 said:
as a metter fact i just went to an ics rom and is ics baseband still no data =/
Click to expand...
Click to collapse
What rom, what baseband?
Sent from my SPH-D710BST using xda premium

Phantom rom and ff18

felix787 said:
Phantom rom and ff18
Click to expand...
Click to collapse
Hmmm, have you tried going back to stock everything?
Sent from my SPH-D710BST using xda premium

Yes everything el29 and evrything :/

felix787 said:
Yes everything el29 and evrything :/
Click to expand...
Click to collapse
Not to insult your intelligence, just trying to help, but is your 3g/4g toggled to on in your settings and or pulldown? And try flashing stock jellybean Rom and modem and update your prl and profile(unless you've done that already)
Sent from my SPH-D710BST using xda app-developers app

Yeh i downloades stock jelly bean from samsung and nothing metropcs prl latest prl is 3033 and yes 3g is toggled :/

Probably need to check your QPST settings again bro, I'm on CM10.1 like you and my 3g works fine AFTER flashing alt-carrier data fix.

eliteone1 said:
Probably need to check your QPST settings again bro, I'm on CM10.1 like you and my 3g works fine AFTER flashing alt-carrier data fix.
Click to expand...
Click to collapse
I haven't messed with Metro since last year when I set up my wife with my a Sprint S2 on Caulkins ROM. I recall having to mess with setting manual APN settings to get data to work.
Is that still the case with these newer roms?

dkd711 said:
I haven't messed with Metro since last year when I set up my wife with my a Sprint S2 on Caulkins ROM. I recall having to mess with setting manual APN settings to get data to work.
Is that still the case with these newer roms?
Click to expand...
Click to collapse
Not really, APN settings these days are usually in regards to getting MMS to work. I do recall losing my Metro flash while flashing ROM's around on my Droid 2 back in the day. Not sure if there's any situation in which the Metro flash could possibly be wiped with the Epic 4g Touch but that might be a thought to keep in mind. Good luck!