Develop Bugs

[Q] Desire Brick with just fastboot

Hello,
I am reading for hours and lost the overview...
My Desire had CM7 installed and had many reboots lately (maby caused by juice defender or the dalvic cache on the ext) but now it just wont boot at all. Not even into recovery.
Bootloader and Fastboot work but I cant flash anything or boot a recovery
S-ON
HBOOt-0.93.0001
RADIO-5.11.05.27
Code:
fastboot flash recovery recovery-clockwork-2.5.1.3-z71.img
sending 'recovery' (3742 KB)... OKAY
writing 'recovery'... INFOsignature checking...
FAILED (remote: signature verify fail)
Code:
fastboot boot recovery-clockwork-2.5.1.3-z71.img
downloading 'boot.img'... OKAY
booting... FAILED (remote: not allowed)
I am using a Mac but could also use a Win7 or Ubuntu maschine if this is necessary...
Please help

Ruu?
Sent from CM7

Is the custom recovery flash failing because the phone is s-on?
If so would it help to run alpharev on it?
Not sure, just a thought!

From what I understood you need to be able to boot to use alpharev or RUU?
I started the RUU .exe and stole the ROM.zip from TEMP but either the CID is not correct (I have VODAP102) or the version is older since CM7 is 2.3.3 I guess.

00droid said:
Is the custom recovery flash failing because the phone is s-on?
Click to expand...
Click to collapse
I guess so. Isn't S-OFF the thing you need to flash custom roms? I had it rooted and installed the recovery with clockwork or so from within OS without changing S-ON.
I got a UK VODA RUU to start at least (SD inside, sim not) but fails with ERROR[170] USB-Connoction Error
Afterwards it booted magically, I could backup data, flash LeeDroid to (what I thought) would solve the instability problem but it crashed again (connected cable is not good). And now its the same all over again but this time I cannot reproduce the luck from the first time.
Should I keep trying and then S-OFF, dwongrade bootloader and upgrade radio? What else could I do.
But I dont think the attepted flashing will work again...

magreet said:
From what I understood you need to be able to boot to use alpharev or RUU?
I started the RUU .exe and stole the ROM.zip from TEMP but either the CID is not correct (I have VODAP102) or the version is older since CM7 is 2.3.3 I guess.
Click to expand...
Click to collapse
Hmm, I think you're right actually, it's been a while since s-off for me!

S-OFF is indeed needed to flash the custom recovery via fastboot.
RUU - so probably you need a branded RUU for your phone (VODA-Germany VODAP102).
Or do the above mentioned method - take the ROM.zip and put it on your SD Card, but RENAME it to PB99IMG.zip.
Since you are branded, you need to create a goldcard, to avoid CID error:
Here's how

The phone needs to boot to create a GoldCard Luckily this happens from time to time.
But since 2.3.3 is newer than the newest 2.2 RUU the GoldCard CID fix wont work in my oppinion...

Even I am struck with the same issue. Only fastboot access with an Orange desire. I do not have a gold card to try out anything.
My phone's CID: ORANG001
Bootloader throws up the following error:
Loading...[PB99DIAG.zip]
No image!
Loading...[PB99DIAG.nbh]
No image or wrong image!
Loading...[PB99IMG.zip]
No image!
Loading...[PB99IMG.nbh]
No image or wrong image!
Any suggestions?

Could you flash a RUU from within Windows? I tried many, at least one of them tried to start and failed but the phone started at least. If a boot loop occurs remove the battery and retry as long as it takes. Worked for me.
Maybe without sim.

Some people reported being able to boot WITHOUT sd in the phone. Try it.

[DEV] Possible S-OFF using HTCdev for WFS A510e

Hi guys,
A good friend of mine recently requested me to help with rooting her Wildfire S A510e (purchased from SingTel, CID HTC__044). I managed to change her Wildfire S from S-ON to S-OFF via HTCdev. As far as I know, HTCdev isn't supposed to give you S-OFF but only to remove the NAND write locks on certain partitions.
Users: This is NOT for you. This is NOT a tutorial.​I will not be responsible for any bricked WFS.​
Here's what happened, pretty long so I'm gonna break it down into multiple sections. Important points in red.
Replacing SingTel ROM with HTC EU ROM
The phone was originally running Android 2.3.3, ROM version 1.35.707.1, HBOOT 0.90.0000. This ROM version is not supported by HTCdev unlock yet.
Reboot to HBOOT on WFS. Choose FASTBOOT.
Connect WFS to computer via USB.
Downloaded the HBOOT RUU for "hTC Asia India" from HTCdev. Attempted to install the RUU but got a CID error.
Disconnected WFS from computer.
Rebooted normally on WFS.
Connect WFS to computer via USB (Disk Drive).
Created a goldcard by using SimpleGoldCard while WFS is mounted as Disk Drive. (this wipes your SD card)
Disconnect WFS from computer and reboot.
Connect WFS to computer via USB (Disk Drive).
Downloaded RUU_Marvel_S_HTC_Europe_2.13.401.2
Ran the RUU. Went into %temp%, found the relevant directory and copied rom.zip to the goldcard as PG76IMG.zip.
Disconnect WFS from computer.
Turn off WFS and rebooted into HBOOT.
Went into HBOOT -> Fastboot. RUU_Marvel_S_HTC_Europe_2.13.401.2 was installed successfully (Android 2.3.5, ROM version 2.13.401.2, HBOOT 0.90.0000).
Installing HTCdev Unlock
Rebooted WFS into HBOOT.
Connect WFS to computer via USB.
Downloaded the HBOOT RUU from HTCdev for "HTC EU".
Ran the HBOOT RUU. RUU installation gets stuck at 50% ("Flushing radio...") for about 20 minutes.
Decided that the RUU has hung so disconnected WFS from USB and did a battery pull
RUU offered to do a recovery but I clicked "Exit".
Turn on WFS in HBOOT mode.
S-OFF obtained!
I was pretty much at "dafuq?" at this stage. I didn't even need to upload the device identifier to HTCdev to get an unlock key. The device was already S-OFF (HBOOT shows it)!
HBOOT remained at 0.90.0000.
I verified the S-OFF by flashing ClockWorkMod which went without issues.
Possible theory of operation: (just my thoughts)
The HTCdev HBOOT RUU provides a temporary S-OFF in order to unlock the NAND
When the RUU is done, it is supposed to restore S-ON to the device.
However, since the process was hung, the RUU had no chance of restoring the device to S-ON.
Hence the WFS was left at S-OFF.
If there are any adventurous devs around who are willing to try to dissect the RUU, please do so, but standard disclaimer applies. Attempting to interrupt the HBOOT RUU flashing is pretty dangerous and WILL possibly brick your device! I will not be held responsible if you brick your WFS!
This seems to be a case of pure luck.
Addendum:
The HBOOT RUU contains 2 ZIP files: rom_01.zip, rom_02.zip
They are presumably flashed in-order.
rom_01.zip contains Radio_special_MARVEL_MR_47.23b.35.3035_7.54.39.08M_Signed_20111208.img
rom_02.zip contains hboot_1.08.0099_6e20b6fac09.nb0 and radio_47.23a.35.3035H_7.53.39.03M_MR.img
My friend has radio version 47.23b.35.3035_7.54.39.08M. From here, we can tell that rom_01.zip was successfully flashed but rom_02.zip wasn't. Also notice the "special" file name of the first radio image.
Addendum 2:
It appears that both radio ROMs have the same size but different md5sum. Can someone with S-ON try to flash Radio_special_MARVEL_MR_47.23b.35.3035_7.54.39.08M_Signed_20111208.img? (Again, standard disclaimer applies)

i like the very last sentence that you used ...
good job anyway mate !

how do you go about flashing a radio??
---------- Post added at 04:12 AM ---------- Previous post was at 04:09 AM ----------
rom1.zip is 10.370.252
rom2.zip is 10.586.425
ie not the same size

stevie67 said:
rom1.zip is 10.370.252
rom2.zip is 10.586.425
ie not the same size
Click to expand...
Click to collapse
If you look into the ZIP files, Radio_special_MARVEL_MR_47.23b.35.3035_7.54.39.08M_Signed_20111208.img and radio_47.23a.35.3035H_7.53.39.03M_MR.img are both the same size.
Reboot to HBOOT, choose FASTBOOT, connect WFS to computer. Use "fastboot flash radio Radio_special_MARVEL_MR_47.23b.35.3035_7.54.39.08M_Signed_20111208.img".

ok i tried to flash this radio i put the .img file on my sdcard went to fastboot then recovery,install from sdcard and there was nothing there so i put the rom1.zip folder on my sdcard went to fastboot,install from sdcard,rom1.zip and got this
CWM-based Recovery v5.0.2.6
-- Installing: /sdcard/rom_01.zip
Finding update package...
Opening update package...
E:Can't open /sdcard/rom_01.zip
(bad)
Installation aborted
did i do something wrong??

You must flash the radio with fastboot command. But this wont work, bc the hboot will check if the file is signed. And that isn't.
But try, maybe i'm not right.
Sent from my HTC Wildfire S A510e using XDA App

and the fastboot command is??
and the file says its signed

Reboot to HBOOT, choose FASTBOOT, connect WFS to computer. Use "fastboot flash radio Radio_special_MARVEL_MR_47.23b.35.3035_7.54.39.08M_Signed_20111208.img".
Click to expand...
Click to collapse
He said it
Sent from my HTC Wildfire S A510e using XDA App

My phone wouldn't update using the HTC method so I extracted the two ROMs from the RUU and flashed them seperately. After the first one (radio) I noticed that the phone was S-OFF but when I'd flashed the second it was S-ON again and I couldn't go back.

WOW, you have S-OFF after flashing radio via
fastboot flash radio radio.img
???
And now you can't go back?

I extracted the htcdev ruu and tried to flash the radio image. but it is not possible, signature check fails. so if the bootloader is already unlocked, it is not possible to obtain s-off this way

Have u test it with
fastboot oem lock
first and then to flash the radio.img?
Or to try to downfrade hnoot with the tutorial here in forum and then flash the new radio.

not yet. Will try that and report again
did relock phone using oem lock.
*** RELOCKED ***
Tried flashing 1st radio from htcdev ruu
flashing successful, but still S-ON

Hmm, and can u try to downgrade to Hboot 0.9 or Hboot 1.08?

I'm a noob so it's possible I made a mistake but I'm pretty sure I was S-OFF after the first flash. I was on Hboot 0.09.0000. Unfortunately I didn't realise the significance at the time so proceeded anyway.

I will try

I will try too, but earliest tomorrow, then i have my windows pc

this is what i get with or without bootloader locked
C:\Android>fastboot flash radio Radio_special_MARVEL_MR_47.23b.35.3035_7.54.39.0
8M_Signed_20111208.img
sending 'radio' (23936 KB)...
OKAY [ 5.375s]
writing 'radio'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 13.063s

stevie67 said:
this is what i get with or without bootloader locked
C:\Android>fastboot flash radio Radio_special_MARVEL_MR_47.23b.35.3035_7.54.39.0
8M_Signed_20111208.img
sending 'radio' (23936 KB)...
OKAY [ 5.375s]
writing 'radio'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 13.063s
Click to expand...
Click to collapse
I extracted the rom1.zip and renamed it PG76IMG.zip and flashed via hboot. this worked when the phone was re-locked

theq86 said:
I extracted the rom1.zip and renamed it PG76IMG.zip and flashed via hboot. this worked when the phone was re-locked
Click to expand...
Click to collapse
so are you now s-off??

[Q] Can't Unlock Bootlader, signature verify fail

Hello,
I try to Unlock the Bootloader of my HTC Desire HD.
I do the method of HTCDev, but, when I do this command:
fastboot flash unlocktoken Unlock_code.bin
I have this message:
sending 'unlocktocken' (0 KB)... OKAY [ 0.013s]
writing 'unlocktocken'... INFOsignature checking...
FAILED (remote: signature verify fail)
finished. total time: 0.017s
I try to re-dowload a Unlock_code.bin, but it doesn't change my probleme...
I put a PD99IMG for test if it do sth but my version is older, so the zip is unseless...
Can you help me?
***LOCKED (OOW)***
ACE PVT SHIP S-ON RL
HBOOT-2.00.0029
MICROP-0438
RADIO-26.14.04.28_M
eMMC-boot
Dec 22 2011

MaloZ said:
Hello,
I try to Unlock the Bootloader of my HTC Desire HD.
I do the method of HTCDev, but, when I do this command:
fastboot flash unlocktoken Unlock_code.bin
I have this message:
sending 'unlocktocken' (0 KB)... OKAY [ 0.013s]
writing 'unlocktocken'... INFOsignature checking...
FAILED (remote: signature verify fail)
finished. total time: 0.017s
I try to re-dowload a Unlock_code.bin, but it doesn't change my probleme...
I put a PD99IMG for test if it do sth but my version is older, so the zip is unseless...
Can you help me?
***LOCKED (OOW)***
ACE PVT SHIP S-ON RL
HBOOT-2.00.0029
MICROP-0438
RADIO-26.14.04.28_M
eMMC-boot
Dec 22 2011
Click to expand...
Click to collapse
Why are You trying to unlock the bootloader? It Is useless. Anyway, the bootloader Is PD98IMG not PD99

glevitan said:
Why are You trying to unlock the bootloader? It Is useless. Anyway, the bootloader Is PD98IMG not PD99
Click to expand...
Click to collapse
I want unlock the bootloader for S-OFF and root my phone, and install a Rom Costum.
In the Advanced Ace Hack Kit manuel, it is write: Unlock the bootloader using the HTC DEV bootloader unlock process.
Do you know an other average to do that?

MaloZ said:
I want unlock the bootloader for S-OFF and root my phone, and install a Rom Costum.
In the Advanced Ace Hack Kit manuel, it is write: Unlock the bootloader using the HTC DEV bootloader unlock process.
Do you know an other average to do that?
Click to expand...
Click to collapse
No. but that only applies if you have the last 2.3.5 update in your inspire. Then, you are in the right way, if not there's no need to unlock it. Regarding the fail message, seems that the file unlock token is not ok. Do you have a md5sum to check?

dont know if this is relevant, but my dhd was on 2.3.5 when i ran the hack kit and i didnt use htc dev, yet im rooted and s-off

willstanners said:
dont know if this is relevant, but my dhd was on 2.3.5 when i ran the hack kit and i didnt use htc dev, yet im rooted and s-off
Click to expand...
Click to collapse
No it is not relevant. You are not supposed to unlock the bootloader. That is just for Inspire's running the lastest at&t build. All other builds are mainly supported.

glevitan said:
No it is not relevant. You are not supposed to unlock the bootloader. That is just for Inspire's running the lastest at&t build. All other builds are mainly supported.
Click to expand...
Click to collapse
Well, I'm going to test put S-OFF and root my HDH With Advanced Ace Hack Kit without unlock
Edit:!
I try, but it Fail: AAHK say to me: Read the Effen Manuel! Don't Watch the TV!
Have I to unlock the bootloader or not?
I am on Android 2.3.5, Sense 3.0.

So, now, I can run the AAHK, but he says to me: You have to Dowgroad.
When I put the PD98IMG on my SdCard and run into the bootloader, my HDH says: Update fail! Main Version is older!
What can I do >< ?

MaloZ said:
So, now, I can run the AAHK, but he says to me: You have to Dowgroad.
When I put the PD98IMG on my SdCard and run into the bootloader, my HDH says: Update fail! Main Version is older!
What can I do >< ?
Click to expand...
Click to collapse
Did you say that you were rooted and S-OFF earlier? If so why are you running AAHK?

All it's work, now it's good ^^!
Just be the Downgroad with AAHC and it works!
Thank you all!

[Q] My HTC Desire showing S-OFF But I Can't Access Through CMD prompt

Hi,
I've just bought a HTC Desire handset and I tried to Root it. From two days I am trying to do it but not succeeded.
Yesterday I used unRevoked 3.32 but in the end of whole procedure it gave me following error message:
"Error : failed to get root. Is your firmware too new?"
After that I tried to install ClockWorkMod 2.5.0.7 to take backup but when I am connecting my mobile in HBOOT mode my PC is detecting the device but I cant access the device through cmd prompt (e.g: adb shell or adb devices) it is showing : "error device not found"
Following are my mobile specs:
BRAVO PVT3 SHIP S-OFF
HBOOT-0.93.0001
MICROP-051d
TOUCH PANEL-SYNT0101
RADIO-5.09.05.30_2
Aug 10 2010, 17:52:18
Andriod version
2.2
baseband version
32.44.00.32U_5.09.05.30_2
KERNEL VERSION
2.6.32.15-gd96f2c0
[email protected] #1
Build number
2.13.707.2 CL274424 release-keys
Software number
2.13.707.2
Browser version
WebKit 3.1
Kindly help me because I searched and I cant find the solution of my problem in the old posts.
Awaiting for quick response.

u have to put ur phone in fastboot, (phone off then hold back button + power) if u have fastboot drivers installed it should say "FASTBOOT USB" on ur phone.
to flash recovery in fastboot comnand window the command is
fastboot flash recovery c:\recovery.img
(put recovery.img in ur c:\ drive on P.C)
theres a good step by step guide in my sig.
Sent from my HTC Desire

recovery.img?
Thank you so much for your quick response, I was not expecting this type of response, it is truly appreciable.
Kindly tell where can I find recovery.img file? is this a general file which i can download from internet or anything else?
Kindly help.

hammad.mohsin said:
Thank you so much for your quick response, I was not expecting this type of response, it is truly appreciable.
Kindly tell where can I find recovery.img file? is this a general file which i can download from internet or anything else?
Kindly help.
Click to expand...
Click to collapse
heres the link, u can do it the PB99IMG method, just follow the instructions or download PB99IMG.zip and extract it then flash recovery.img. either way u have a guide
http://forum.xda-developers.com/showthread.php?t=1751258
Sent from my HTC Desire

Not Working
jmcclue said:
heres the link, u can do it the PB99IMG method, just follow the instructions or download PB99IMG.zip and extract it then flash recovery.img. either way u have a guide
http://forum.xda-developers.com/showthread.php?t=1751258
Sent from my HTC Desire
Click to expand...
Click to collapse
I've copied PB99IMG.zip file in my sdcard and rebooted the mobile but it is giving following error for one second and again comes to HBOOT screen.
HBOOT
SD Checking...
Loading... [PB99DIAG.zip]
No image!
Loading... [PB99DIAG.nbh]
No image or wrong image!
Loading... [PB99IMG.zip]
No image!
Loading... [PB99IMG.nbh]
No image or wrong image!
After that I executed
C:\android-sdk-windows\tools>fastboot devices
HT07RPL08054 fastboot
C:\android-sdk-windows\tools>fastboot flash recovery c:\PB99IMG\recovery.img
sending 'recovery' (3786 KB)... OKAY [ 0.577s]
writing 'recovery'... FAILED (remote: not allowed)
finished. total time: 0.577s
C:\android-sdk-windows\tools>
Kindly what I've to do now?
I Know I am bothering you but you don't know how much I am grateful to you.

make sure the PB99IMG is not in any folder on ur sdcard and try again.
also if u do it fastboot method, extract the PB99IMG.zip file so ur left with the 2 files (android-info.txt and recovery.img) put just the recovery.img in ur c:\ drive then
fastboot flash recovery c:\recovery.img
Sent from my HTC Desire

same result
jmcclue said:
make sure the PB99IMG is not in any folder on ur sdcard and try again.
also if u do it fastboot method, extract the PB99IMG.zip file so ur left with the 2 files (android-info.txt and recovery.img) put just the recovery.img in ur c:\ drive then
fastboot flash recovery c:\recovery.img
Sent from my HTC Desire
Click to expand...
Click to collapse
I checked the file PB99IMG.zip, it is saved on main directory of sdcard.
I copied recovery.img file on c: and then executed command again but it again gave me following message:
C:\android-sdk-windows\tools>fastboot flash recovery c:\recovery.img
sending 'recovery' (3786 KB)... OKAY [ 0.562s]
writing 'recovery'... FAILED (remote: not allowed)
finished. total time: 0.562s
C:\android-sdk-windows\tools>
I Cleared my Both Phone and SD Card memory but still i am getting same results.

hammad.mohsin said:
I checked the file PB99IMG.zip, it is saved on main directory of sdcard.
I copied recovery.img file on c: and then executed command again but it again gave me following message:
C:\android-sdk-windows\tools>fastboot flash recovery c:\recovery.img
sending 'recovery' (3786 KB)... OKAY [ 0.562s]
writing 'recovery'... FAILED (remote: not allowed)
finished. total time: 0.562s
C:\android-sdk-windows\tools>
I Cleared my Both Phone and SD Card memory but still i am getting same results.
Click to expand...
Click to collapse
very strange.. ur s-off so should work. i just downloaded the PB99IMG.zip put on my sdcard then with phone off, held volume down + power and bootloader found it and asked to update recovery... so it works, whatever is going wrong is on ur part.

I am scared
jmcclue said:
very strange.. ur s-off so should work. i just downloaded the PB99IMG.zip put on my sdcard then with phone off, held volume down + power and bootloader found it and asked to update recovery... so it works, whatever is going wrong is on ur part.
Click to expand...
Click to collapse
I was reading other posts and I downloaded revolutionary software, it was installed sucessfully on my device.
In the recovery menu I selected backup/restore option from the list, after selection only "REVOLUTIONARY" is appearing on the screen from past 5 minutes.
Kindly tell, is this normal (if yes) then how much time it will take, (if not) then what should I do. Can I interrupt the process by pressing any key(which i don't know) . Does it make any problem if i reboot my mobile during this procedure.
Kindly tell I am really scared.

dear , I did something wrongly,
after i got s-off i can see only HTC logo when its on, even if i wanna open recovery mod still the same,
If i try to flash in CMD Its says <Failed : Remote not Allowed >
BRAVO PVT4 SHIP S-OFF
HBOOT-0.93.0001
MICROP-051d
TOUCH PANEL-SYNT0101
RADIO-5.11.05.27
Please help

[Q] After downgrade touch don't work

My HTC wildfire touch don't work after downgrade from 2.34.186.1 to from 2.34.186.1.
The branding ist 1und1. After this i try to find the original OTA 2.34.186.1 to upgrade
to the old one that was on the phone before. - no way - i don't found
After this i unlocked the bootloader and i think that there is a way to upgrade any firmware
but its not possible.
My bootscreen:
*** UNLOCKED ***
BUZZ PVT SHIP S-ON
HBOOT-1.02.0000
MICROP-0622
RADIO-3.35.15.31
Dec 13 2011,12:08:54
The HTC boot normaly to the lock screen but the touch don't work.
Anyone an idea to solve my problem an install another rom?

Here is another thread that discusses a similar issue.
Hope it'll help.
http://forum.xda-developers.com/showthread.php?t=1056767
Sent from my G9 using Tapatalk

Pretendde said:
My HTC wildfire touch don't work after downgrade from 2.34.186.1 to from 2.34.186.1.
The branding ist 1und1. After this i try to find the original OTA 2.34.186.1 to upgrade
to the old one that was on the phone before. - no way - i don't found
After this i unlocked the bootloader and i think that there is a way to upgrade any firmware
but its not possible.
My bootscreen:
*** UNLOCKED ***
BUZZ PVT SHIP S-ON
HBOOT-1.02.0000
MICROP-0622
RADIO-3.35.15.31
Dec 13 2011,12:08:54
The HTC boot normaly to the lock screen but the touch don't work.
Anyone an idea to solve my problem an install another rom?
Click to expand...
Click to collapse
Hmmm. This is going to be hard to get out of as you upgraded your Hboot. Does the phone still register fastboot commands? Also what downgrade thread did you follow?
Sent from my HTC Sensation using Tapatalk

It dont work at update with ruu shows the version 2.46.0.0 of the divece rom....
The update prozess stops and there is " FEHLER [155] : ABBILD-UPDATE-FEHLER " (IMAGE UPDATE ERROR)
The same with the PC49IMG.zip on microsd card:
RUU
Security fail!
Update Fail!

Pretendde said:
It dont work at update with ruu shows the version 2.46.0.0 of the divece rom....
The update prozess stops and there is " FEHLER [155] : ABBILD-UPDATE-FEHLER " (IMAGE UPDATE ERROR)
The same with the PC49IMG.zip on microsd card:
RUU
Security fail!
Update Fail!
Click to expand...
Click to collapse
That's not what I mean, to unlock your bootloader you would have had to issue the command fastboot OEM unlock, or fastboot flash OEM unlock unlock_token.bin or something similar. These types of commands are the ones I'm interested in I want to see if you can flash clockworkmod recovery pal.
Sent from my HTC Sensation using Tapatalk

I downgraded with the standard buzzdowngrade.zip package, step1 but the goldcard-step fail.....i flashed after hboot downgrade RUU_Buzz_Vodafone_DE_1und1_1.19.186.3_Radio_13.45.55.24_3.35.15.31_release_133745_signed.exe
Than was the problem with the touch ... it dont work.
After this i tryed many ruu's ....no way.
Than i downloaded from htcdev - PC4910000_Buzz_Froyo_hboot_1.02.0000_R3.exe and flashed and unlocked with Unlock_code.bin
I was thinking i would be able to unlock and update every rom

Pretendde said:
I downgraded with the standard buzzdowngrade.zip package, step1 but the goldcard-step fail.....i flashed after hboot downgrade RUU_Buzz_Vodafone_DE_1und1_1.19.186.3_Radio_13.45.55.24_3.35.15.31_release_133745_signed.exe
Than was the problem with the touch ... it dont work.
After this i tryed many ruu's ....no way.
Than i downloaded from htcdev - PC4910000_Buzz_Froyo_hboot_1.02.0000_R3.exe and flashed and unlocked with Unlock_code.bin
I was thinking i would be able to unlock and update every rom
Click to expand...
Click to collapse
Ok so fastboot works, good good. Do you have clockworkmod recovery installed? If not follow my thread for rooting hboot 1.02.0000 and install clockworkmod but go no further.
Also just for your information the ruu will not install because of
1. Your honor is higher than the ones in the RUU,
2 your bootloader is unlocked.
We need to downgrade you to the WWE rom with hboot 1.01.0001 and hopefully that will restore your touch panel to working order
Sent from my HTC Sensation using Tapatalk

Clockworkmod recovery is installed, rooting hboot 1.02.0000 o.k.
and now?

Pretendde said:
Clockworkmod recovery is installed, rooting hboot 1.02.0000 o.k.
and now?
Click to expand...
Click to collapse
ok so what we want to do know is downgrade your hboot to 1.01.0001 so to do that we need your misc partition to be edited. as such i would like you to boot the phone into clockworkmod recovery and connect it to the pc with a usb cable. windows should install the drivers if it has not done so already.
next you will need to set up your command prompt for using adb/fastboot commands.
then we will pull a copy of your misc partition to your sdcard and then copy it into your windows adb folder.
then you will upload that image to me, i will make the necessary changes and then re-upload for you.
then you will flash it to the phone all going well, re-lock your bootloader and then downgrade your hboot and rom and hopefully regain touch input
then as an extra if you want to use a rooted version of that german ruu you were trying to flash i can make you a "safe to flash" version
ok, so....
step 1. Connect your wildfire up to your pc In clockworkmod recovery mode.
step 2. open a command prompt within your adb/fastboot folder. (the same one you used to flash clockworkmod recovery)
step 3. enter the following commands one at a time. copy paste is recommended.
Code:
adb shell
su
cat /dev/mtd/mtd0 > /sdcard/misc.img
exit
exit
adb pull /sdcard/misc.img misc.img
step 4. Upload this file to somewhere like dropbox or media fire and then send me a link to it.

in command prompt
su
/sbin/sh: su: not found
what i do wrong?

Pretendde said:
in command prompt
su
/sbin/sh: su: not found
what i do wrong?
Click to expand...
Click to collapse
OK just skip that and move onto the next bit.
Sent from my Nexus 7 using Tapatalk

I attached this file here, i hope it is o.k.
It takes a while until i found out to mount the SD card before

Pretendde said:
I attached this file here, i hope it is o.k.
It takes a while until i found out to mount the SD card before
Click to expand...
Click to collapse
okey dokey, here is your new misc image. extract it into your adb folder.
i have edited this so it will re-lock your bootloader automatically once you have flashed it. one problem solved
also download this package, it has some tools you will need and the WWE rom you need to flash
lastly we need to make a goldcard. this will be hard given that your touch screen is non-functional. as such you will need a different, working android phone and YOUR sdcard. this trick is sdcard specific so dont swap them about
ok once you are ready with the right stuff, do these steps.
step 5. now we need to make a gold card. if you already have one, you can skip this part. first using your working android phone, download and install Goldcard helper from the android market. Run the app and copy down your SD cards reverse cid. double check it
step 6. now go to this website here and enter in your reverse cid. it will then let you download a goldcard.img.
step 7. now go back to the package you downloaded earlier with the WWE rom (named 1.01.zip) in it and run the goldcardtool.exe, this will flash the goldcard to your sd card. Warning! this will format your card!! in order to achieve this you will have to mount the sdcard from clockworkmod recovery to the computer, use mount usb storage and not mount sdcard.
step 8. once that is done we are now ready for the final push

Now the gold card is ready, i leave al the data on the goldcard, its not been formatted. Goldcard tool says, G: Goldcard is now ready.
The new misc image, must be copy to the phone ?

Pretendde said:
Now the gold card is ready, i leave al the data on the goldcard, its not been formatted. Goldcard tool says, G: Goldcard is now ready.
The new misc image, must be copy to the phone ?
Click to expand...
Click to collapse
ok from here copy the Nmisc.img to your sdcard and do not rename it, leave it on the sd card within no folders.
then connect up the phone in clockworkmod recovery again, and mount the sdcard with mount sdcard and not usb mass storage.
lastly make sure that the 1.01.zip is in your adb folder.
issue the following commands.
Code:
adb shell
(your shell symbol should be a #)
flash_image misc /sdcard/Nmisc.img
exit
(now it should not be a #)
adb reboot bootloader
The phone should not reboot into bootloader and should say at the top locked OOW.
This is ok, if it does not say this then your misc image was not flashed.
if all is well issue these commands.
Code:
fastboot oem rebootRUU
fastboot flash zip 1.01.zip
This will state an error, and that it needs to be reflushed. this is what we want, if any other issue your goldcard may have failed.
repeat the last command to reflush.
Code:
fastboot flash zip 1.01.zip
(this will take a while.)
fastboot reboot
the phone should reboot into the WWE stock rom and hopefully your touch screen will be working again. if it is proceed to s-off with revolutionary here ignore all but revolutionary and then if you want the german ruu as a safe flash rom send me a link to the ruu and I will make it. but it make take a few days.
im at work atm so my replys will be delayed pal, good luck

INFOsignature checking...
INFOzip header checking...
INFOzip info parsing...
INFOchecking model ID...
INFOchecking custom ID...
FAILED (remote: 42 custom id check fail)
finished. total time: 63.656s
i flashed 3 times....

Pretendde said:
INFOsignature checking...
INFOzip header checking...
INFOzip info parsing...
INFOchecking model ID...
INFOchecking custom ID...
FAILED (remote: 42 custom id check fail)
finished. total time: 63.656s
i flashed 3 times....
Click to expand...
Click to collapse
Your gold card has failed. Format the sdcard and then reissue the fastboot commands.
Sent from my HTC Sensation using Tapatalk

Yes the goldcard was bad, now its okay but n ow a new error :
INFOsignature checking...
FAILED (remote: not allowed)
finished. total time: 56.078s
flashed 5 times ...same error

Pretendde said:
Yes the goldcard was bad, now its okay but n ow a new error :
INFOsignature checking...
FAILED (remote: not allowed)
finished. total time: 56.078s
flashed 5 times ...same error
Click to expand...
Click to collapse
Does your bootloader still say locked?
Sent from my HTC Sensation using Tapatalk

heavy_metal_man said:
does your bootloader still say locked?
Sent from my htc sensation using tapatalk
Click to expand...
Click to collapse
yes
*** locked (00w) ***