Related
Hey guys, i got this in a few days ago so I can verify it fits the MOTOROLA DROID X not the Samsung that the description says.
You can even tell by the part # that it is made for the DROID X. Why Verizon has it screwed up I dont know, but it is the ONLY face-in snap-in holster I have found.
http://www.verizonwireless.com/b2c/store/accessory?action=accessoryDetails&accessoryId=46229
Enjoy, I will post pics of it on my phone in a bit.
They have a better one that comes with a back shel also
It is called shell/holster combo for $30
Sent from my DROIDX using Tapatalk
I have the holster. It's a little flimsy and I'm probably going to replace it with the Seidio. As for the holster shell combo, it sucks. I had it for my incredible and it gets loose.
Sent from my DROIDX
Check out this one...
http://store.androidcentral.com/verizon-shell--holster-combo/4A24A7318.htm
I like that better because it comes with the protective case, and its a clip on.
That's the one I had, it's made by Amzer. It doesn't protect the top of the device either. Mine fell out of the holster and dinged up the top of my phone.
Yourrid said:
Check out this one...
...store.androidcentral.com/verizon-shell--holster-combo/4A24A7318.htm
I like that better because it comes with the protective case, and its a clip on.
Click to expand...
Click to collapse
I have this one and hope it loosens up over time. Right now, it takes two hands to get the phone out of the holster because it's so tight. It works great for me though, no worrying about the phone falling out of the holster.
SW
SideWynder said:
I have this one and hope it loosens up over time. Right now, it takes two hands to get the phone out of the holster because it's so tight. It works great for me though, no worrying about the phone falling out of the holster.
SW
Click to expand...
Click to collapse
I might have to get this one then, if its that tight.
I work at an auto parts store so im constantly moving around, brushing up against greasy things or crawling under people's cars so I need some protection for my phone. How is the quality of the case?
Also, does the case wrap around the front of the phone? I mean if I lay the phone face down will the screen touch or will the case protect it?
Yes, the case does wrap around the front enough to keep the glass off the counter when you lay it down. Both the shell and the hoster are rigid with a rubberized feel.
It doesn't add a lot of bulk to the phone like some cases I've looked at, so the phone is pocketable when you want to go without the holster.
I picked mine up in my Verizon store, so would recommend you stop at one and ask to see it on an X.
SideWynder said:
Yes, the case does wrap around the front enough to keep the glass off the counter when you lay it down. Both the shell and the hoster are rigid with a rubberized feel.
It doesn't add a lot of bulk to the phone like some cases I've looked at, so the phone is pocketable when you want to go without the holster.
I picked mine up in my Verizon store, so would recommend you stop at one and ask to see it on an X.
Click to expand...
Click to collapse
yea im going out tomorrow to buy that thing. it was exactly what I was looking for... I need a good screen protector too, as i usually have dirt and grime on my hands from dealing with car parts. I heard Vzw screen protectors suck and dont even cover the whole glass. Any recommendations?
Yourrid said:
yea im going out tomorrow to buy that thing. it was exactly what I was looking for... I need a good screen protector too, as i usually have dirt and grime on my hands from dealing with car parts. I heard Vzw screen protectors suck and dont even cover the whole glass. Any recommendations?
Click to expand...
Click to collapse
Yes i have this holster. Just picked it up yesterday. And it seems secure and I liked the look and the feel of it in my hand. Just didn't like that it left the top of the phone exposed. In the holster its protected though. Its when you take it out it seems like it could possibly get dinged at the top of the phone if it fell. Otherwise it seems pretty cool. Im looking to see if someone comes out with a holster that includes complete coverage of the phone and holster combo. I think they didn't cover the top because the antenna is located there. Not sure but just a theory.
Yourrid said:
yea im going out tomorrow to buy that thing. it was exactly what I was looking for... I need a good screen protector too, as i usually have dirt and grime on my hands from dealing with car parts. I heard Vzw screen protectors suck and dont even cover the whole glass. Any recommendations?
Click to expand...
Click to collapse
The screen protectors we talk about in this thread (the SGP Crystal Clear ones) are the best by far, and they also have the anti-fingerprint ones too.
http://forum.xda-developers.com/showthread.php?t=738601
Returned the hard silicon one they sell and got me the shell/holster combo. Awsome!
Sent from my DROIDX using XDA App
SideWynder said:
I have this one and hope it loosens up over time. Right now, it takes two hands to get the phone out of the holster because it's so tight.
Click to expand...
Click to collapse
I had a girlfriend like that once
OneStepAhead said:
I had a girlfriend like that once
Click to expand...
Click to collapse
+1 for Hilarity
GoldenCyn said:
Returned the hard silicon one they sell and got me the shell/holster combo. Awsome!
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
I have that one too but the matte black finish is peeling off very ugly as it does. Love the function exactly what I wanted, but the shiney plastic under the finish looks terrible. Just my two cents.
Sent from my DROIDX using XDA App
I had an idea for a holder that works as a belt buckle a few years ago hahaha
Sent from my DROIDX using xda premium
i use this case it is great i have another similar one for my razr HD
Im looking for a flip case where you can detach the 'flip' part of the case. At the moment im using the Samsung Flip case (instead of a screen protector) within a cheap TPU case that has a kickstand. Im finding the camera tricky to use with the flip part of the case getting in the way, so it would be good if i could take it off when needed, then reattach it. :good:
I've done a DIY mod on the flip case - cut off the 'flip' part and stuck it to the TPU with velcro - as you could imagine its far from perfect...
I've been searching for a while but nothing so far.....
Well here's something the case makers seriously have to do.
Imagine something as convenient as the Microsoft tablet detachable keyboard?! But a detachable flip.
I would buy one without thinking twice.
Sent from my GT-N7000 using Tapatalk 2
Check this out...
http://www.ebay.com/itm/New-OEM-Pro...Accessories&hash=item3cc828af01#ht_3059wt_724
Jrob2k said:
Check this out...
http://www.ebay.com/itm/New-OEM-Pro...Accessories&hash=item3cc828af01#ht_3059wt_724
Click to expand...
Click to collapse
that's a normal flip case......he's looking for a flip case where the cover is detachable.
Sent From My Paranoid Powered Note Baby!
http://www.ebay.com/itm/Samsung-Gal...034417?pt=PDA_Accessories&hash=item3f159520b1
Hope this helps.
s4sixty said:
http://www.ebay.com/itm/Samsung-Gal...034417?pt=PDA_Accessories&hash=item3f159520b1
Hope this helps.
Click to expand...
Click to collapse
Looks like a practical solution.
However it has a magnetic clasp. If I understood correctly, this is bad for the Note, because it interacts with the digitiser ?
peseta said:
Looks like a practical solution.
However it has a magnetic clasp. If I understood correctly, this is bad for the Note, because it interacts with the digitiser ?
Click to expand...
Click to collapse
U didn't indicate u want one without a magnetic clasp. :silly:
I have a normal wallet style flip case and it has a magnet, doesn't interfere my GNote's digitizer or wacom sensor.
Sent from my GT-N7000 using Tapatalk 2
Is there any flip cover that only the front one like apple ipad one? So could use any hardcase...
Thanks for the input.
The Mercury colour case looks good, i'll bear it in mind. There a couple of youtube vids knocking about so i'll do some more research.
As usual, you need a woolly coat to get the things you want...
Detachable front cover case for the iPhone A larger case for the Note would work well.
----
There must be a demand for such a case? I can't be the only one who prefers not to use screen protectors, but finds a flip case gets in the way of using the phone, especially the camera!?
The search continues....
Edit; Found another one;
Luxury window flip case- not sure where the 'luxury' element of the case comes in as to be fair, it looks cheap and nasty!
maybe you can try modding one using valcro
akromatic said:
maybe you can try modding one using valcro
Click to expand...
Click to collapse
I did, it looked naff! Ive gone back to using screen protectors without a flip case until i find what im looking for.
kbm said:
Im looking for a flip case where you can detach the 'flip' part of the case. At the moment im using the Samsung Flip case (instead of a screen protector) within a cheap TPU case that has a kickstand. Im finding the camera tricky to use with the flip part of the case getting in the way, so it would be good if i could take it off when needed, then reattach it. :good:
I've done a DIY mod on the flip case - cut off the 'flip' part and stuck it to the TPU with velcro - as you could imagine its far from perfect...
I've been searching for a while but nothing so far.....
Click to expand...
Click to collapse
I have one of these : http://www.ebay.co.uk/itm/AIO-BLACK..._MobilePhonesCasesPouches&hash=item2570d08d2f
You can remove the phone relatively easy when you need to use the camera, is a bit fiddly to get to the stylus (but I have large fingers)
the magnetic clasp locks around the rear of the case/phone so does not affect the digitizer.
Hope this helps
I was also looking for a detachable flip casing .....the normal flip casing is uncomfortable feels weird when capturing pictures & recording videos
I bought a blue flip case says official from amazon, it was fine for the first month, but after that, I just took it off, its so uncomfortable to use. any suggestions for some others
I've got one of these - Amazon Link and it's just the job.
Easy to detach and the corners have save my note a couple of times now.
hey u guys ever try buying from http://list.qoo10.sg/item/Q100/406210991?sellerview=on?
pretty cheap...i bought a so call Korean brand flip case..for sgd$9? will be waiting for it..
here is a detachable flipcase on ebay here is the link for a youtube video i know it is for iphone but still http://www.youtube.com/watch?v=8CVG4czXcIs
here is the link for the case for the note it is a tpu case with detachable flip http://www.ebay.com/itm/Samsung-Gal...919296?pt=PDA_Accessories&hash=item4d03b8b880
it has a magnet but it doesn't damage the screen it is a very nice case
Hi guys.
I work on sites that can get very dusty and was after a case that would protect my phone from dust getting into my phone.
There's a lot of rugged cases that protect the ports/plugs with silicon plugs, but nothing that will also protect the 2 front speakers from dust.
At one stage I was looking at waterproof cases like the Seidio OBEX, Lifeproof, Otterbox Armor, but it doesn't look like these companies will be making these cases for the HTC ONE .
Does anyone know of any case that I could use to protect my ports/plugs/speakers (all) from dust?
ps. I don't want to use those waterproof bag cases.
AFAR85 said:
Hi guys.
I work on sites that can get very dusty and was after a case that would protect my phone from dust getting into my phone.
There's a lot of rugged cases that protect the ports/plugs with silicon plugs, but nothing that will also protect the 2 front speakers from dust.
At one stage I was looking at waterproof cases like the Seidio OBEX, Lifeproof, Otterbox Armor, but it doesn't look like these companies will be making these cases for the HTC ONE .
Does anyone know of any case that I could use to protect my ports/plugs/speakers (all) from dust?
ps. I don't want to use those waterproof bag cases.
Click to expand...
Click to collapse
only one. otter-box defender. but u r phone might look pregnant.
The otterbox defender and Trident Kraken both have speaker cutouts in their inbuilt screen protector.
I also don't care how bulky/fat/pregnant it looks as I'll only be using it at work.
AFAR85 said:
Hi guys.
I work on sites that can get very dusty and was after a case that would protect my phone from dust getting into my phone.
There's a lot of rugged cases that protect the ports/plugs with silicon plugs, but nothing that will also protect the 2 front speakers from dust.
At one stage I was looking at waterproof cases like the Seidio OBEX, Lifeproof, Otterbox Armor, but it doesn't look like these companies will be making these cases for the HTC ONE .
Does anyone know of any case that I could use to protect my ports/plugs/speakers (all) from dust?
ps. I don't want to use those waterproof bag cases.
Click to expand...
Click to collapse
ppl who work on sites dont carry such phones on-sites.. and they use Bluetooth. your looking for wrong thing, look for bluetooth and emails and texts can wait while working on sites.
jags_the1 said:
ppl who work on sites dont carry such phones on-sites.. and they use Bluetooth. your looking for wrong thing, look for bluetooth and emails and texts can wait while working on sites.
Click to expand...
Click to collapse
Some of them do some of them don't. I see iPhone, android phones aswell as windows phones, blackberrys, palm, flip phones, sliders and bt headsets on construction sites all the time. People use what they got n what they want.
(edited to not sound like a d**k) XD
Sorry op. Ive got no clue. I don't really use cases. Something like a life proof case for the One would be what your looking for, but I think they only make cases for iPhones.
Get a phone sock or a little zip case with belt loop on it. You have to think differently if you want your phone to stay clean and safe. I work on site and all you can really do is keep it clean and safe. Another tip is put it in an old pair of cut down tights or stockings what woman wear and then put your case on the phone to help keep dust out.
Sent from my HTC One using xda app-developers app
Honestly, when i know i will be in a dusty or wet environment, i usually just put my phone in a ziploc bag. Your screen taps are still recognized and people can still hear your voice through it.
Yeah I'm currently using a ziplock bag.
It's not ideal, but it definitely works a treat.
I've looked quite a bit and cant really find any good cases that are like otterbox. Its not that i want an otterbox. I just would like something similar that covers up all the ports on the phone. There only seem to be 3. Maxboost hybrid, trident and i bason i think. But they seem to be cheap and dont fully cover the ports. I already have the maxboost, witch is ok, but its pretty cheap, and every time i pull it out of my pocket the bottom half slides off and i have to slide it back in place. Why is there no otterbox? They got something against the N5?, they even got a moto g case. Its all about the $$$
Andromendous said:
I've looked quite a bit and cant really find any good cases that are like otterbox. Its not that i want an otterbox. I just would like something similar that covers up all the ports on the phone. There only seem to be 3. Maxboost hybrid, trident and i bason i think. But they seem to be cheap and dont fully cover the ports. I already have the maxboost, witch is ok, but its pretty cheap, and every time i pull it out of my pocket the bottom half slides off and i have to slide it back in place. Why is there no otterbox? They got something against the N5?, they even got a moto g case. Its all about the $$$
Click to expand...
Click to collapse
http://blog.shopandroid.com/ballistic-sg-maxx-case-nexus-5-otterbox-rival/
Stealyourface said:
http://blog.shopandroid.com/ballistic-sg-maxx-case-nexus-5-otterbox-rival/
Click to expand...
Click to collapse
I just bought this, from fleabay, Cant really tell you too much, never had an otterbox..
I can tell you its pretty cool, and the front screen protector is nice, doesnt hinder touch too much
The problem you are going to most likely have with the ballistic (because I certainly do) is the need to remove it once a week or so due to the level of dust that somehow manages to transfer from inside your pocket or anywhere else to under the protector. Unlike an otterbox which actually tries to keep dust out at the top, this is a wide open door. Also, it takes some getting used to looking at the case because of how much the 4 corners bulge out - definitely not the prettiest case around.
But I fully appreciate this case for what it does do right - I have dropped my N5 on concrete numerous times and it's sometimes funny to show off how good of a case it is to people I meet by just saying "oops" and dropping it from shoulder height onto pretty much any surface below. See the looks on peoples faces - worth the money right there. Lol
Stealyourface said:
http://blog.shopandroid.com/ballistic-sg-maxx-case-nexus-5-otterbox-rival/
Click to expand...
Click to collapse
Ya thats one i saw also. It isnt very appealing.
Just received this hybrid a couple days ago and do far loving it. Tight fit, no play, covers all ports, not lint magnet, nice hard tpu inner and a decent built-in screen protector.
http://www.fosmon.com/product/hybo-snap-series-for-google-nexus-5/
Multiple colors.
I got it on amazon for around $6.50 us on amazon.
Sent from my Nexus 5 using XDA Free mobile app
Hey i saw that too but couldnt find a black one. Thanks
Andromendous said:
Ya thats one i saw also. It isnt very appealing.
Click to expand...
Click to collapse
None of them are appealing to me. Even otterbox. On any phone. Just ugly.
Sent from my Nexus 5 using Tapatalk
Andromendous said:
I've looked quite a bit and cant really find any good cases that are like otterbox. Its not that i want an otterbox. I just would like something similar that covers up all the ports on the phone. There only seem to be 3. Maxboost hybrid, trident and i bason i think. But they seem to be cheap and dont fully cover the ports. I already have the maxboost, witch is ok, but its pretty cheap, and every time i pull it out of my pocket the bottom half slides off and i have to slide it back in place. Why is there no otterbox? They got something against the N5?, they even got a moto g case. Its all about the $$$
Click to expand...
Click to collapse
Spigen Slim Armor, I have been using it for months. Looks great, protects well, and doesn't add much size to the phone. $15 for the smooth black, great deal
http://www.spigen.com/nexus-5-case-slim-armor.html
Looks arent as important to me, im just worried about the protection of the phone and ports
Most people haven't heard of it but Siedio makes amazing full body protective cases.
Search Google for the Seidio Convert Combo Case Nexus 5. (I'd give you a link but I have 2g right now)
The case makes your nexus 5 a little bulky, but not much heavier ime. It has covers for the ports and its a 3 layer case with a good quality screen protector included.
Honestly, I believe that the Spigen Slim Armor is quite overpriced for what you get. i say this having actually bought one myself. The software is totally rubbish. Also, since it depends on using the proximity sensor to activate the screen, it causes numerous issues with that as well. you could always use it without the software, but it still doesn't change the fact that you just paid $45 for a piece of plastic with a hinge.
+1 on the seidio convert case. I just got it from the android central store during one of their last sales and I love it. It comes with the seidio surface hard shell case with kickstand which is pretty slim and protective on its own, but it also comes with the thicker rubber outer case and hard shell for structure and more protection (and protects/covers the ports), plus it comes with a locking holster that you can switch mounting attachments on between the standard belt clip, or the car mount, running arm band, bike handle bar mount (sold separately).
The case is awesome, I couldn't say more good things about it, great shock protection, great dust protection, light water protection, great button response, and the ability the simply use the surface case in its own right makes this well worth the money!
Sent from my Nexus 5 using Tapatalk
lotherius said:
Honestly, I believe that the Spigen Slim Armor is quite overpriced for what you get. i say this having actually bought one myself. The software is totally rubbish. Also, since it depends on using the proximity sensor to activate the screen, it causes numerous issues with that as well. you could always use it without the software, but it still doesn't change the fact that you just paid $45 for a piece of plastic with a hinge.
Click to expand...
Click to collapse
Thanks for the input. Was just browsing this particular case and was considering getting one
Thanks for the suggestions all, I think ill be gettin me a seidio!!
I really need some advice, I usually swear by OtterBox but they have of course not released any cases for the 10 and if you listen to them they say that they don't have it in their plans. So my question is what is the best case I get as an alternative to an OtterBox? I'm looking for something with a similar level of protection. I tried the unicorn beetle pro but I don't like it because there's plastic on the back of the case that makes it very slippery when placed on a surface, I miss the grip that the OtterBox had on the back of the case. Also I need a belt clip.
I just ordered one of these
http://www.amazon.com/Holster-Protec...ilpage_o00_s00
What worries me however is that cheap price
What recommendations do you guys have? Thank you so much in advance
Mark112887 said:
I really need some advice, I usually swear by OtterBox but they have of course not released any cases for the 10 and if you listen to them they say that they don't have it in their plans. So my question is what is the best case I get as an alternative to an OtterBox? I'm looking for something with a similar level of protection. I tried the unicorn beetle pro but I don't like it because there's plastic on the back of the case that makes it very slippery when placed on a surface, I miss the grip that the OtterBox had on the back of the case. Also I need a belt clip.
I just ordered one of these
http://www.amazon.com/Holster-Protec...ilpage_o00_s00
What worries me however is that cheap price
What recommendations do you guys have? Thank you so much in advance
Click to expand...
Click to collapse
The Amazon side seems to be unavailable already...
Well, I'm an otterbox fan too. Sad there are no news about an otterbox for the 10. Check out the specific thread about cases... Just found something similar to Otterbox there...
http://www.amazon.com/SUPCASE-Full-...etle htc 10&qid=1462899739&ref_=sr_1_1&sr=8-1
Maybe that will cover our needs until there will be an otterbox in the future.
I ordered also an Incipio dual pro case, which is really nice but not so good like otterbox. I still don't have the device.. But the cases :laugh:
What I can't recommend is oeago double layer case... Ordered that too, but this is really hard plastic and I guess the device will get scratches easily with that one.
Edit... Just reread your post :angel:... Didn't saw your review about the Unicorn... Just ordered that one... So you don't recommend it?
Get this, you'll thank me later: http://www.amazon.com/SUPCASE-Full-...qid=1463161450&sr=8-1&keywords=htc+10+supcase
Only thing I would recommend you do is remove the screen protector from the case (it's just held on with glue) that way you can use whatever protector you choose. These cases are WAY better than Otterboxes.
i have the unicorn beetle ( above post links) its just a good as a otter box you will not be disappointed. best case I found for the 10 so far imo
In my original post I said that I have already tried that case
I tried the unicorn beetle pro but I don't like it because there's plastic on the back of the case that makes it very slippery when placed on a surface, I miss the grip that the OtterBox had on the back of the case
Click to expand...
Click to collapse
I had high hopes for that case but unfortunately it's not as good as it appears to be
afuller42 said:
i have the unicorn beetle ( above post links) its just a good as a otter box you will not be disappointed. best case I found for the 10 so far imo
Click to expand...
Click to collapse
Weird question, but can you put the phone in the belt clip with the screen facing out?
Hopefully that works, second question does it hold well?
Matt
Sent from my HTC_M10h using XDA-Developers mobile app
dtswk said:
Weird question, but can you put the phone in the belt clip with the screen facing out?
Hopefully that works, second question does it hold well?
Matt
Sent from my HTC_M10h using XDA-Developers mobile app
Click to expand...
Click to collapse
The belt clip holds absolutely fine, I'm pretty sure that you can put the phone in the case either way but I think it's specifically designed to be put in with the screen facing inward. The only complaint I have the back of the phone is not 100% all silicone. The back of the case has hard plastic on it that makes it slide across surfaces very easily
It's worth mentioning that the phone does not clip into the belt holster as firmly as OtterBox's do, I think it's pretty clear that the case is considered a clone. Be careful because I would say that if you drop the phone from more than about maybe 10 feet in the air it may pop out of the belt clip
Mark112887 said:
The belt clip holds absolutely fine, I'm pretty sure that you can put the phone in the case either way but I think it's specifically designed to be put in with the screen facing inward. The only complaint I have the back of the phone is not 100% all silicone. The back of the case has hard plastic on it that makes it slide across surfaces very easily
It's worth mentioning that the phone does not clip into the belt holster as firmly as OtterBox's do, I think it's pretty clear that the case is considered a clone. Be careful because I would say that if you drop the phone from more than about maybe 10 feet in the air it may pop out of the belt clip
Click to expand...
Click to collapse
Would you mind testing it does clip in face out please. Then I can order one.
Sent from my HTC_M10h using XDA-Developers mobile app
dtswk said:
Would you mind testing it does clip in face out please. Then I can order one.
Sent from my HTC_M10h using XDA-Developers mobile app
Click to expand...
Click to collapse
I would but unfortunately I do not have the case anymore, I returned it this morning out of frustration. As good as they try to be the sad truth is there is just no replacement for an OtterBox. I guess this is just the consequence of buying a phone so early, I'm hoping that within the next few months OtterBox releases a defender series Case for this phone, as soon as they do I'm all all over it
I'll try to explain as best I can, the belt clip on the beetle does not snap in, it is more of a friction fit I'm almost certain that you can put the phone in with the screen facing outward however when you do you will have to touch the screen with your fingers in order to get it out of the belt clip. The case is really a knockoff of the OtterBox defender, I had high hopes for it when I ordered it as well and despite the fact that I tried to get myself to like it I just couldn't
it says it will damage it if you do it face forward. waiting for jcase to return my phone so couldn't try it
Mark112887 said:
I would but unfortunately I do not have the case anymore, I returned it this morning out of frustration. As good as they try to be the sad truth is there is just no replacement for an OtterBox. I guess this is just the consequence of buying a phone so early, I'm hoping that within the next few months OtterBox releases a defender series Case for this phone, as soon as they do I'm all all over it
I'll try to explain as best I can, the belt clip on the beetle does not snap in, it is more of a friction fit I'm almost certain that you can put the phone in with the screen facing outward however when you do you will have to touch the screen with your fingers in order to get it out of the belt clip. The case is really a knockoff of the OtterBox defender, I had high hopes for it when I ordered it as well and despite the fact that I tried to get myself to like it I just couldn't
Click to expand...
Click to collapse
You really returned it because it would slide around on it's back? Are you usually on a boat or something that would cause things that are laying on a flat surface to slide around on their own cause I honestly don't understand why that would be an issue, but in the past there would be pads of TPU on the corners of the phone so it would never have been able to do something like that.
Anyway, if a belt clip wasn't so important I would recommend Supcase's Unicorn Beetle Hybrid case (once it finally comes out) It's the other's little brother and is my absolute go-to for my past 4 or so devices. It is similar to the UAG cases, but they look and feel much better.
To be honest the protection that your case and the Otterbox offers is complete overkill. Btw, I absolutely hate the rubber material that Otterbox uses... talk about junk.
tkoreaper said:
You really returned it because it would slide around on it's back? Are you usually on a boat or something that would cause things that are laying on a flat surface to slide around on their own cause I honestly don't understand why that would be an issue, but in the past there would be pads of TPU on the corners of the phone so it would never have been able to do something like that.
Anyway, if a belt clip wasn't so important I would recommend Supcase's Unicorn Beetle Hybrid case (once it finally comes out) It's the other's little brother and is my absolute go-to for my past 4 or so devices. It is similar to the UAG cases, but they look and feel much better.
To be honest the protection that your case and the Otterbox offers is complete overkill. Btw, I absolutely hate the rubber material that Otterbox uses... talk about junk.
Click to expand...
Click to collapse
I understand your point of view don't get me wrong. Yes I really returned it because it would slide around on its back, I need a casecase with some kind of grip. I don't go on a boat or anything but I'm in a wheelchair and I've had several instances where things started sliding around whenever I'm doing what I need to do. To be honest I've been using OtterBox's for so long that I've gotten used to them. I know where you're coming from when you talk about the silicone but to be honest I've never had any issue with OtterBox giving me a hard time about replacing it for me when need be
Some people consider the protection that an OtterBox defender offers as being overkill but I remember back in 2015 I accidentally ran over my OtterBox and I'll tell you what after that I was convinced that the case had just paid for itself, I had to get a new one because the case was broke but the phone was completely fine