Develop Bugs

Broken 4G, tried a bunch of things

So I have a 4g problem. In Santa Clara, CA.
I get a decent signal and it holds fine, no disconnects, but there is not data transfer.
Things I tried:
- Checked MAC and it matches the case.
- Deleted tree.xml
- Reflashed Radio and Wimax
- Updated PRL, Profile
No luck with any of them.
4G worked a while ago, then I flashed CM6, then back to stock 2.2.
Current setup: Stock 2.2, netarchy's kernel 4.1.8-cfs.
Any suggestions? Did I miss any fix possibilities?

you're keys are most likely gone.

Last-Chance said:
you're keys are most likely gone.
Click to expand...
Click to collapse
Oh no, who's gonna let me in the house
Seriously though, what does that mean?
Also, more importantly, is there a way to fix it?

Did you check your connection with speed test? Is the 4G problem restricted only to Web browsing?
I ask because the Ad Free app will block 4G Web browsing, but not 4G anything else and not 3G Web.
Sent from my PC36100 using XDA App

Maxy6 said:
Did you check your connection with speed test? Is the 4G problem restricted only to Web browsing?
I ask because the Ad Free app will block 4G Web browsing, but not 4G anything else and not 3G Web.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
No AdFree here. Can not connect to the web or use mail.
So no connection of any sort.

install alogcat and see what wimax errors show up

TeknoJnky said:
install alogcat and see what wimax errors show up
Click to expand...
Click to collapse
So, installed alogcat, run it. I'm guessing I'm looking for "E/Wimax ....."
When filter by "E/Wimax", I get the following
"E/Wimax ( 730):<DC CONNECT> IO Error:msg='/127.0.0.1:7771 - Connection refused"
Also
"E/Wimax ( 730)<DCP> Bad return status 0xffffffff"
Does that mean anything?

fua1 said:
So I have a 4g problem. In Santa Clara, CA.
I get a decent signal and it holds fine, no disconnects, but there is not data transfer.
Click to expand...
Click to collapse
didn't see this part. Disregard my last comment.
Also keys = rsa keys. When you delete them you're not able to connect to 4g at all.

I had this problem for a while and it was because I was on an old radio and couldn't get the new one to flash properly without wiping thee cache first
Sent from my PC36100 using XDA App

abaileyb said:
I had this problem for a while and it was because I was on an old radio and couldn't get the new one to flash properly without wiping thee cache first
Click to expand...
Click to collapse
Thanks.
I thought that might be the case. So I flashed the new radios, and as far as I can tell they're up to date.
Baseband: 2.15.00.07.28 (from phone info settings)
Wimax: 26023 (from wimax_mtd)
The interesting things is that it appears to be connected, and even get's IP issued, just no data transfer...

I was having the same problem. I did everything u listed above n nothing still didn't work. I was running vael Rom with kings bfc #9 kernel. I didn't know what else to do so I Decided to start from scratch....did a full wipe flash the radio, the wimax and vael Rom again still no luck. So I told myself **** it....then I decided I wanted to try Fresh Rom. So I wipe everything again n flash Fresh on to my phone and now my 4g is working again....I don't knowing that would help u but it did it for me. Hope u get it figure out.
Update: ok so I thought about flashing a new kernel. So I made a NAND backup and flashed netarchy-toastmod kernel. After flashing my 4g stop working again.
Did a NAND restore. Then this time I wipe the delvik cache. Then flash the kernel and 4g is working...

kcsoldier said:
I was having the same problem. I did everything u listed above n nothing still didn't work. I was running vael Rom with kings bfc #9 kernel. I didn't know what else to do so I Decided to start from scratch....did a full wipe flash the radio, the wimax and vael Rom again still no luck. So I told myself **** it....then I decided I wanted to try Fresh Rom. So I wipe everything again n flash Fresh on to my phone and now my 4g is working again....I don't knowing that would help u but it did it for me. Hope u get it figure out.
Update: ok so I thought about flashing a new kernel. So I made a NAND backup and flashed netarchy-toastmod kernel. After flashing my 4g stop working again.
Did a NAND restore. Then this time I wipe the delvik cache. Then flash the kernel and 4g is working...
Click to expand...
Click to collapse
Thanks for the info. Looks like I better get wiping and flashing.
Did you wipe data as well or just the caches?

Wipe data and cache when flashing a new Rom.
Wipe dalvik cache when flashing a new kernel

Same thing happened to me. I ended up flashing the RA Recovery because I heard CW wasn't wiping cache's correctly. So you might want to try that as well.
I tried wiping both caches 1-2 times multiple times and it never worked. Then one time I wiped both caches 3 times and it worked.

Mr. Monkey said:
Same thing happened to me. I ended up flashing the RA Recovery because I heard CW wasn't wiping cache's correctly. So you might want to try that as well.
I tried wiping both caches 1-2 times multiple times and it never worked. Then one time I wiped both caches 3 times and it worked.
Click to expand...
Click to collapse
Do you mean just wipe and it worked, or wipe then flash radios?
Thanks.

Last-Chance said:
didn't see this part. Disregard my last comment.
Also keys = rsa keys. When you delete them you're not able to connect to 4g at all.
Click to expand...
Click to collapse
any idea how to get them back? I cant connect at all. flashed radio, wimax, stock kernal, stock all in one rom, nothing gets it back.

ajk511 said:
any idea how to get them back? I cant connect at all. flashed radio, wimax, stock kernal, stock all in one rom, nothing gets it back.
Click to expand...
Click to collapse
Maybe this will help somehow:
http://forum.xda-developers.com/showthread.php?t=716694

fua1 said:
Maybe this will help somehow:
http://forum.xda-developers.com/showthread.php?t=716694
Click to expand...
Click to collapse
Can't try it right now but it looks like that will be my fix. Thank you for the link.
Sent from my PC36100 using Tapatalk

I have tested my 4G datacard from Sprint in that area (top of Palo Alto), where I had 1-2 bars of 4G signal.
Because they are still testing there, I was unable to connect...
This might be your case -- they are still testing, and probably turn connections on/off during this period.
Best of luck though!

This 4G problem happened to me...i dug around in my backups and found a wimax.img from nandroid folder on sdcard. You need to find an older wimax image that was created during a back up...these wimax.imgs that are an image of your phone HAVE YOUR WIMAX KEYS

No 3G or 4G - 1x only - No Nandroid Backup HELP!

So my friend rooted his Evo with Unrevoked. I verified s-off.
He copied a PC36IMG onto his SD which turns out was some 2.1 rooted stock ROM. After doing that his phone could not make/receive calls/text or connect to 1x/3G/4G. Basically an expensive phone that has no phone functions. Everything else works (WiFi included). He flashed http://link.geekfor.me/rootedromzip onto his phone from http://forum.androidcentral.com/htc...vo-install-clockwork-recovery.html#post165998.
When I looked at it, he still did not have a custom recovery so I flashed Amon RA PC36IMG. Full factory wiped data/cache/dvalik. Flashed Synergy RC1. Phone still could not make/receive calls and was getting Error 16 when trying to call. Called Sprint and they reprovisioned phone and fixed calls and texting. Noticed his phone is stuck on 1x and cannot connect to 3G when my phone next to his works fine. Did not test 4G yet since I have poor 4G coverage in my area. Cannot update his profile - just sits there like something is happening but it never completes.
What are his options here? Is it a bad radio or something that we can fix? Can we flash a stock rooted ROM and regain 3G? Remember, no nandroid was made unfortunately.

I would try flashing the latest radios just to be sure. And tell your friend to always make a nandroid backup to avoid this problem in the future.

Well his first time flashing. I think he mistakenly thought the PC36IMG as a custom recovery but it was actually an entire ROM.
Didn't have a chance to nandroid. I'm instructing him how to update newest radio combo and seeing what happens.
Update: Flashed latest combo radio. Updated profile and PRL. Still stuck on 1x even after reboot. Is he hosed? Does Sprint have to do something on their end to fix his EVDO? 4G isn't working either by the way.
Update 2: Wimax Keys Checker - https://market.android.com/details?id=com.joeykrim.wimaxkeys says that RSA Key is present. Relieved that he didn't lose his RSA key. Just can't figure for the life of me why he can't connect to 3G or 4G. Not sure where to go from here? Maybe trying to flashing latest stock rooted RUU? http://forum.xda-developers.com/showthread.php?t=1110733

Bumping for some attention.

Hey, happened to me a couple of times, it will come back. Maybe wipe everything again, have you tried ##data# and entering msl key, wait... Have you updated his data profile in settings
Sent from my PC36100 using XDA Premium App

Hello.....did that work for ya?
Sent from my PC36100 using XDA Premium App

Ok, was on the road when I had wife reply...lol.. When you rebooted the phone,did you wipe cache,and dalvik. Then try updating profile? It sounds weird,but has worked for me,without even updating profile. I have had no coverage before after flashing a Rom,also,did just that,and it came back. If rsa keys are present,that is good. If you would be kind enough to reply,whether fixed or not,would appreciate it,anyway,gonna move on...
Sent from my PC36100 using XDA Premium App

Cares said:
So my friend rooted his Evo with Unrevoked. I verified s-off.
What are his options here? Is it a bad radio or something that we can fix? Can we flash a stock rooted ROM and regain 3G? Remember, no nandroid was made unfortunately.
Click to expand...
Click to collapse
Did he try updating his profile & prl
Sent from my criffvo

Updating profile and PRL doesn't work. It keeps attempting to update but it is never successful.
I haven't had a chance to get his phone to just try reflashing a new ROM or stock ROM to see what will happen though.
He says using ##data# and entering his MSL code and changing EVDO to automatic doesn't work either.

Cares said:
Updating profile and PRL doesn't work. It keeps attempting to update but it is never successful.
I haven't had a chance to get his phone to just try reflashing a new ROM or stock ROM to see what will happen though.
He says using ##data# and entering his MSL code and changing EVDO to automatic doesn't work either.
Click to expand...
Click to collapse
I would start over again ... wipe completely with Calkulin's "fomat all" zip and flash a rooted stock rom like xhausx. Once the phone boots up, call Sprint and have them walk you through provisioning everything. Once all is well, then move into whatever custom stuff he wants.

wmdunn said:
I would start over again ... wipe completely with Calkulin's "fomat all" zip and flash a rooted stock rom like xhausx. Once the phone boots up, call Sprint and have them walk you through provisioning everything. Once all is well, then move into whatever custom stuff he wants.
Click to expand...
Click to collapse
You took the words from my mouth!
Is he Flashing the RUU's or just running them through the computer? Normally, you sync your phone or through hBoot and then start the program, try flashing stock Froyo and then factory reset once flashed, it helps clear out traces of old roms etc. If you need anymore help feel free to ask, I would be more than happy!

I don't think it worked.
Calkulin's Format, flashed Odexed http://forum.xda-developers.com/showthread.php?t=1133379.
It showed 3G but I think it was misleading. Wiped and flashed to evodeck and it went back to showing 1x. My phone has 3G showing on evodeck next to his so he definitely has 3G coverage.
I guess it's just time to call Sprint for a re-provision? Does it have to be on a Sense ROM for them to reprovision?

Cares said:
I don't think it worked.
Calkulin's Format, flashed Odexed http://forum.xda-developers.com/showthread.php?t=1133379.
It showed 3G but I think it was misleading. Wiped and flashed to evodeck and it went back to showing 1x. My phone has 3G showing on evodeck next to his so he definitely has 3G coverage.
I guess it's just time to call Sprint for a re-provision? Does it have to be on a Sense ROM for them to reprovision?
Click to expand...
Click to collapse
you dont need Sprint to provision, just get your MSL code and do it your self plus I would do a search for people who may of had similar issues and see what they did. Now if that does not work then why dont you check what your network settings are.. See if its set to CDMA(Auto) I remember my Touch Pro I could of set it to 1x maybe something is getting stuck. I think its in ##3282 you check it and I also remember an app on the market called network that did it for you as well.
If that does not work then flash 3.70 radios and then a 3.70RUU and start from scratch.

He already tried ##data#. He can change his EVDO to automatic but it doesn't stay that way.

Alright I don't know how I fixed it but it's fixed.
Just cannot get 4G now. Wimax keys are present. It keeps scanning and cannot get connect. Previously could get 4G at these locations.

I am running EVO as donor/target phone, my is only 1x speed, no matter which rom I try
Synergery, Mik, Stock-Rooted, differ kernal, different PRL, check the data profile Automatic, Try restore but can not cat automatically update, still need to go qpst to update my profile. I have been working on this for two weeks. I went back to my orig phone, it show ev most of time, the speed is must faster than my evo. Searc all over from goole, still no luck, Anyone any idea to try

sitlet said:
I would try flashing the latest radios just to be sure. And tell your friend to always make a nandroid backup to avoid this problem in the future.
Click to expand...
Click to collapse
+1
i know this post is somewhat old. but Making a back up wont take hardly and extra time! always always make one unless you have 100% reliable roms already backed up.

No data/web while using 3.0 roms? Please help

Ok here's the scoop.. I have a Sprint EVO 4G and I am using Metro PCS I have flashed it and have had mms and 1x working on it since day 1 I first started with metroid 2.2 and moved to Cyanogen nightly I have also had it working on Miui and for some reason when I flash. Synergy or the kingdom red that's in rom manager they all use the 3d 3.0 sense I first get this upfating thatvsays hands free network updating and when its done it breifly says 3g but the web doesn't work and that quickly goes away and leaves nothing. I did breifly try the verizon hack with the prl which gave me verizons *2 but no 3g so I put the metro 2004 prl back using the ##775# and got my metro and phone back not sure if this effected anything but thought I should mention it. I HAVE GOOGLED my ass off with no reward. Please someone help me I really want to use the synergy RC2
Thanks
Sent from my PC36100 using XDA Premium App

ACTUALY! It appears to be all sense roms which all use to work before I did this stupid verizon prl evo hack thing so that's the culprit someone please help me because I have tried flashong an ruu I have tried all the metro prls 2001 2003 2002 and the aws. I wouod really lile my data to work with sense roma again lile I said when Infirst flash the rom it will now go into this hands free finding network thing and then it won't find it and simply errors oit I have tried to update the network and prl through the system updates and I get errors

oh did you clear your Dalvik & Dalvik cache? go clear your Dalvik & Dalvik cache and get back with us.

I have cleared Dalvik as well as data, system you name it. My data works with cyanogen miui but no longer any sense roms it happened somewhere between sybergy rc2 abd verizon prl hack tried everything even reprograming settings with qtsp
Sent from my PC36100 using XDA Premium App

oK sorry for the title come to.find out it is all sense for me now it use to be I had a 1x no matter what ROM I used and at first was always sense now I can only get it to breifly say 3g if I update the pro but data web still does not work at all I also tried all the web mms packages to get web going with no success.

I don't know if this works on Metro PCS, but you could try updating the profile in the phone and see if everything comes back.
Under Gingerbread, it is System Updates -> Update Profile.
adambomb_13 said:
oK sorry for the title come to.find out it is all sense for me now it use to be I had a 1x no matter what ROM I used and at first was always sense now I can only get it to breifly say 3g if I update the pro but data web still does not work at all I also tried all the web mms packages to get web going with no success.
Click to expand...
Click to collapse

sadly, the one thing you likely don't want to do. is a restore. lol. back what you can up. for texts I use "SMS Backup & Restore" AND OMG IT WORKS GREAT!
but anyway, find a restore point and just keep going back one at a time until you find one that works.

runcool said:
sadly, the one thing you likely don't want to do. is a restore. lol. back what you can up. for texts I use "SMS Backup & Restore" AND OMG IT WORKS GREAT!
but anyway, find a restore point and just keep going back one at a time until you find one that works.
Click to expand...
Click to collapse
I don't think I am familiar with restore points. Is it like Windows system restore? I would gladly do it! I also.want to mention I put the method sense Rom back and it has the 1x data working perfectly so I'm not sure where or what I lost but the one thing I can hypothisise is it might be an apn issue I can't seem to make the metro alms stick or they don't show up not sure but I looked at the alms on the metrodroid Rom and It was not there either on the other domain they have 2 Sprint1 apns

I hope you installed RA and did backups. FULL backups. lol. you did backups right? I won't even flash a wireless N fix without doing a full backup.

[Q] [SOLVED] Stuck on 1x

Hey, I'm running cm7 and I've been stuck on 1x for only god knows how long. I know there is 3g around because when I first got the phone it worked. After flashing different roms it seems to not want to connect to 3g anymore at all. Why is this?
Sent from my PC36100 using Tapatalk

call sprint and see if there is an outage

Are you somehow stuck on roam only?
You might need to reset your phone through obtaining your MSL code. I flashed my friend's phone incorrectly in the past before lost his 3G.

Cares said:
Are you somehow stuck on roam only?
You might need to reset your phone through obtaining your MSL code. I flashed my friend's phone incorrectly in the past before lost his 3G.
Click to expand...
Click to collapse
I think this may be my problem. I do roam sometimes when I never had before. What should I do in order to fix this?

I am pretty sure there isn't an outage because my friend on sprint has been tooling around on 3g.
I'm able to toggle between the 1x and 4g, but I can't connect to 3g. :-/
Sent from my PC36100 using Tapatalk

Bump.
I'm still having the same issue. Can anybody guide me through getting back to 3G? Would be much appreciated.
Sent from my PC36100 using Tapatalk

+1 .

If I just switched to the stock kernel and then back to the savaged zen one I'm using now, could this fix my error? Just a thought.

Seandeezy said:
If I just switched to the stock kernel and then back to the savaged zen one I'm using now, could this fix my error? Just a thought.
Click to expand...
Click to collapse
I had this exact sh_t happen to me after a flight from Portland to Boston. What I had to do was flash Sense, wipe, then re-flash CM7 (I think it was Deck's ROM).
See if that helps

swagstr said:
I had this exact sh_t happen to me after a flight from Portland to Boston. What I had to do was flash Sense, wipe, then re-flash CM7 (I think it was Deck's ROM).
See if that helps
Click to expand...
Click to collapse
Stock kernel as well?
Sent from my PC36100 using Tapatalk

Seandeezy said:
Stock kernel as well?
Sent from my PC36100 using Tapatalk
Click to expand...
Click to collapse
Eh.. I mighta been usin' Tiamat (this was like 4 mos ago).

This really works!
I had the same exact problem and this worked for me. I found it on goodandevo.net
After following these directions I upgraded to the latest prl and maintain 3g.
'Turn off your GPS. Dial ##3282#, and select Edit. Enter your MSL, then go to Data Profile. Push the menu button, then tap on Restore. Push OK to reboot. Allow the phone to go through hands-free activation, but WATCH YOUR PHONE CAREFULLY AND PRESS CANCEL WHEN IT BEGINS TO UPDATE PRL.'
Found this in the comments here: http://www.goodandevo.net/2011/09/stuck-at-1xrtt-on-your-htc-evo-3d-heres-how-to-get-3g-back.html
Obviously, first you will have to flash a ROM that has working EPST, after restoring 3g, it should hold thru all following flashes.

I have this problem occur on CM7 randomly as well. I just turn off mobile data for about 5 mins then turn it back on and it seems to fix the problem. Least till the next time.

mchristian said:
I had the same exact problem and this worked for me. I found it on goodandevo.net
After following these directions I upgraded to the latest prl and maintain 3g.
'Turn off your GPS. Dial ##3282#, and select Edit. Enter your MSL, then go to Data Profile. Push the menu button, then tap on Restore. Push OK to reboot. Allow the phone to go through hands-free activation, but WATCH YOUR PHONE CAREFULLY AND PRESS CANCEL WHEN IT BEGINS TO UPDATE PRL.'
Found this in the comments here: http://www.goodandevo.net/2011/09/stuck-at-1xrtt-on-your-htc-evo-3d-heres-how-to-get-3g-back.html
Obviously, first you will have to flash a ROM that has working EPST, after restoring 3g, it should hold thru all following flashes.
Click to expand...
Click to collapse
I've followed your instructions and I read up on that website. I've dragged the two files on to my SDcard and placed the one it told me to in system/app. Rebooted my phone and tried to type in ##3282# and nothing happens. It just dials the number. There isn't an option for me to press edit and type in a MSL code. I press menu and there isn't even an option similar to that. I read up that it's probably due to me using a third party dialer. I am using cm7, so is there a way for me to just show the stock dialer for a second to do this and then go back to the dialer that is set for cm7?

Seandeezy said:
I've followed your instructions and I read up on that website. I've dragged the two files on to my SDcard and placed the one it told me to in system/app. Rebooted my phone and tried to type in ##3282# and nothing happens. It just dials the number. There isn't an option for me to press edit and type in a MSL code. I press menu and there isn't even an option similar to that. I read up that it's probably due to me using a third party dialer. I am using cm7, so is there a way for me to just show the stock dialer for a second to do this and then go back to the dialer that is set for cm7?
Click to expand...
Click to collapse
I think the simpliest thing to do would be to flash a stock rom and make your changes and then flash back to your prefered rom. Thats what I did. Flash the stock rom, use EPST and then flash back to CM7. You should have working 3g.

mchristian said:
I think the simpliest thing to do would be to flash a stock rom and make your changes and then flash back to your prefered rom. Thats what I did. Flash the stock rom, use EPST and then flash back to CM7. You should have working 3g.
Click to expand...
Click to collapse
Thanks man! I have obtained 3g and it held through the flash of cm7. For all others who have this problem, just do as his said. The rom I used to flash to properly obtain the correct PRL is located here. So glad I have my 3g back, that 1x speed **** was pissing me off.

Seandeezy said:
Thanks man! I have obtained 3g and it held through the flash of cm7. For all others who have this problem, just do as his said. The rom I used to flash to properly obtain the correct PRL is located here. So glad I have my 3g back, that 1x speed **** was pissing me off.
Click to expand...
Click to collapse
Yeah, I was pulling my hair out too. Happy it worked for you.

[Q] PARANOIDKANGDROID 2.01 MMS not Working

i Recently flashed my ATT samsung galaxy S3 to the Newest ParanoidKANGdroid ROM (2.01) and i Cant seem to receive MMS. Please Help. Tried Everything (almost everything) but im sure there's a fix out there. Help is EXTREMELY Appreciated. THANKS:good:

wordplaydopeaf said:
i Recently flashed my ATT samsung galaxy S3 to the Newest ParanoidKANGdroid ROM (2.01) and i Cant seem to receive MMS. Please Help. Tried Everything (almost everything) but im sure there's a fix out there. Help is EXTREMELY Appreciated. THANKS:good:
Click to expand...
Click to collapse
Without know what "almost everything" there isn't much to suggest...
Can you send MMS?
Cab you make a call?
Did you clean flash?
Is it only on that ROM?
Is your imei still there?
Did you check your APN settings?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

KorGuy123 said:
Without know what "almost everything" there isn't much to suggest...
Can you send MMS?
Cab you make a call?
Did you clean flash?
Is it only on that ROM?
Is your imei still there?
Did you check your APN settings?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Just had to flash back to Stock since i couldn't quite get it right. I Could make calls, i checked my APN Settings and everything looked normal,my Imei was still there but i never tried sending MMS(although i knew i couldn't receive them). If i ever wanna flash back to this Rom(not sure if i did it right the first time) any good tips on how to do it correctly without having this problem again? Thanks.

without knowing what caused the problem we can't tell you anything new to help you prevent it.
you're going to keep hearing "clean flash, full wipe, see if the problem's there still" because we don't know everything about your phone and what could be causing your problem, and a full wipe solves many problems.
sent from my i747 with xda-premium

cehf said:
without knowing what caused the problem we can't tell you anything new to help you prevent it.
you're going to keep hearing "clean flash, full wipe, see if the problem's there still" because we don't know everything about your phone and what could be causing your problem, and a full wipe solves many problems.
sent from my i747 with xda-premium
Click to expand...
Click to collapse
i Did a Full wipe. Flashed back to ParanoidKangDroid and problem still persists... what Vital information could i share to help me fix this?
i Personally LOVE this rom and would like to keep it but this MMS issue is definitely a problem. if Logcat is needed ill try to post one. Im still a little noobish so please bear with me.
**NOTE. Last night when i flashed it i was able to send and recieve mms. & now i Can't. This Also happened yesterday afternoon before i posted this thread. It seems like it only works when it wants to...

wordplaydopeaf said:
i Did a Full wipe. Flashed back to ParanoidKangDroid and problem still persists... what Vital information could i share to help me fix this?
i Personally LOVE this rom and would like to keep it but this MMS issue is definitely a problem. if Logcat is needed ill try to post one. Im still a little noobish so please bear with me.
**NOTE. Last night when i flashed it i was able to send and recieve mms. & now i Can't. This Also happened yesterday afternoon before i posted this thread. It seems like it only works when it wants to...
Click to expand...
Click to collapse
Are you using a third party messaging app or the stock one?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

KorGuy123 said:
Are you using a third party messaging app or the stock one?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
i Used both ChompSMS and Stock messaging. As Of right now Everything appears to be working im Able to send and receive (FOR NOW, Atleast) ... Earlier i went into CWM and WIPED ALL DATA (Factory Reset and Dalvik Cache) and Rebooted my phone. Not sure if thats what got it to work... but usually the MMS stop working (from what ive noticed). Will continue testing Sending\Receiving mms throughout the day. Thanks. Ill be back if problem Re emerges.:good:
***UPDATE. Spoke WAYYY too soon, Problem Persists -__-**
Seems like after i Got all my Apps setup and running MMS fails.. idk if im Correct but just an observation. I can Make Calls,Use data,receive/send SMS. but Cant send or Receive MMS.

wordplaydopeaf said:
i Used both ChompSMS and Stock messaging. As Of right now Everything appears to be working im Able to send and receive (FOR NOW, Atleast) ... Earlier i went into CWM and WIPED ALL DATA (Factory Reset and Dalvik Cache) and Rebooted my phone. Not sure if thats what got it to work... but usually the MMS stop working (from what ive noticed). Will continue testing Sending\Receiving mms throughout the day. Thanks. Ill be back if problem Re emerges.:good:
***UPDATE. Spoke WAYYY too soon, Problem Persists -__-**
Seems like after i Got all my Apps setup and running MMS fails.. idk if im Correct but just an observation. I can Make Calls,Use data,receive/send SMS. but Cant send or Receive MMS.
Click to expand...
Click to collapse
This may sound tedious but I'd reinstall an app at a time and try to send a message. Something is interfering. Are you restoring through Google or titanium backup? Are you restoring system data if you are using titanium? That can cause problems...
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

you could try Settings > More > Mobile Networks > APN and choose Reset to default (which should be read off your sim). Restart your S3 and test your data connections.
i'm assuming you're not using straight talk or anything but at&t on your phone, correct? mms dont send over wifi

KorGuy123 said:
This may sound tedious but I'd reinstall an app at a time and try to send a message. Something is interfering. Are you restoring through Google or titanium backup? Are you restoring system data if you are using titanium? That can cause problems...
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Ive been restoring through Google... Tedious but worth a Try. Thanks for that suggestion. Hopefully i can get to the bottom of this.. i Just went back to Stock. Will try again later when i have a more time to keep playing with it. hmmm i Wonder what could be interfering

xBeerdroiDx said:
you could try Settings > More > Mobile Networks > APN and choose Reset to default (which should be read off your sim). Restart your S3 and test your data connections.
i'm assuming you're not using straight talk or anything but at&t on your phone, correct? mms dont send over wifi
Click to expand...
Click to collapse
Correct. Ive messed around with the APN settings on previous installs (Reset to Default and Reboot) and the problem is still there... Might have to give it another try after i flash this rom again. Although there was an Occasion where i did that (Reset to Default and Reboot) and it worked but only for a short amount of time then MMS fails again.

wordplaydopeaf said:
Correct. Ive messed around with the APN settings on previous installs (Reset to Default and Reboot) and the problem is still there... Might have to give it another try after i flash this rom again. Although there was an Occasion where i did that (Reset to Default and Reboot) and it worked but only for a short amount of time then MMS fails again.
Click to expand...
Click to collapse
PROBLEM SOLVEDc:good: No longer having issues, Thanks for all the Help.