[Q] How to change -88dBm wifi dropout. - Desire Q&A, Help & Troubleshooting

Hi people,
Im wanting to know how i can change the -88dBm dropout default for the new gingersense ROM's, I have tried the fix for the HTC Desire HD HERE but it dosent work still dropping at exactly -88dBm.
Is there something else that needs to change in the fix or another fix made? I cant find any files in the ROM that point to dropout defaults or minimum signal etc...
Thanks

Related

WiFi turns off itself

Hello mates
I try to surf by WiFi most of the time when I am at home but unfortunately my Desire deactivates WiFi ramdomly after ~ 1.5 minutes. The connection is not lost, WiFi is really deactivated! If I re-enable WiFi afterwards, the same occurs again
WiFi-Standby-Policy is on "Never" and I currently don't use any other WiFi-managing apps.
The problem is really pi**ing me off as I cannot simply browse that way :[
Here is a short Video:
http://www.youtube.com/watch?v=m2IBU-C6_XA See 0:13
Anyone else having this issue?
What firmware and radio are you running?
Have you tried changing your Router to connect to a different Wi-Fi frequency channel, could be something to do with interference maybe?
FW 2.1-update1
Radio 32.36.00.28U_4.06.00.02_2
Can't imagine that a wrong channel in my router forces my Desire to switch off WiFi... I'm forced to use channel 13 as I would have interferences otherwise
edit: changed it from 13 to 10, didn't change anything.
Could a hardreset solve the problem?
Yes, i was going to suggest you try a hard reset to get rid of any software bugs and set your device back to factory condition.
If that does not work, and if not already done so, then you could try rooting and flashing to a different rom. You could also try a different radio version too as this can improve signal strength of Wi-Fi.
Sent from my HTC Desire using XDA App
Did a hardreset but problem still persists
I am still having this annoying bug In the meantime I did a hardreset 3 times and also bought another router -.-
Please help me!
I've seen a lot of people complaining about one problem or another on here, and it puzzles me greatly why more respondents don't say the bleeding obvious.. if you phone doesn't work, take it back! That's what warranties are for people!
Sent from my HTC Desire using XDA App

[Q] Integerated Internet Calling option

I was wondering if anybody else has noticed that the Droid Incredible 2 has the option of an integrated internet VOIP option in the call settings menu.. been searching it up to see if anybody else has posted/noticed this but to no avail. So has anybody else noticed this and tried it?
As I remember correctly it's on both the sensation rom-Virutous Unity-and also the stock Gingerbread Rom.. You can and also have the choice of answering internet calls through you're phone when set up in the call option menu.
I've also looked at the HTC manual and have yet to find it.. maybe i'm not searching it right.
Thanks

[Q] Need Help - Regarding Virtuous Quattro RC2

I just flashed my Desire Z with Virtuous Quattro RC2. Everything is working fine. Except a few Glitches. Can anybody help me with these:
1. Wifi - I connected to wifi when i run it for the first time. Now i dont see any advanced options for finding wifi networks. Do i need any app for this.
2. Bluetooth - Same problem as wifi. cant find advanced settings for changing name and searching other devices.
3. When playing music and locked screen, the album art shows in 30% of the screen.
pls reply.
somebody reply
Never played with Virtuous Quattro, but ever thought that these could be general bugs, seeing as it is still PRE-RELEASE.
Have you looked in the thread to see if other people are having the same issues?
-Nipqer
I did not have this problems with Wifi and Bluetooth on VQ RC2.
Did you do a full wipe before?
The point with the 30% cover on Lockscreen an issue i also had.
as this is a pre-release this kind of issues can happen.
just check out the topic if anyone has the issues too:
http://forum.xda-developers.com/showthread.php?t=1428866
If you click wifi in the settings it will bring you to the screen that allows you to connect or scan for networks. That is about the extent of the settings (which are all most people need). If you need any more in depth information I suggest getting an app (Wifi Analyzer is a good one).
When you are in the bluetooth menu, if you press the menu key it will allow you to rename your phone and adjust visibility timeout. Again, if you are looking for more advanced settings see if there is an app.
Lockscreen issues are quite common. Try upgrading to the RC3. It has corrected the graphical issues for quite a few people.
The current roms are just the first step in the development of ICS roms. Once all the developers have had a chance to work with the code for a while, I imagine we will see roms with more enhanced features.
Hitting menu in the wifi and bluetooth settings should bring you to advanced settings.
and i think there should be settings in the cyanogenmod settings unless of course I'm thinking of the Andromadus ROM
I don't want to lose time by flashing again, but i have a question : do you still need to synchronize with google everytime you want to had a contact on your phone only?
Thanks for your help
Thanks for your help guys.
The wifi and bluetooth menu were cakewalk. thats why they call us "noobs"
But i have installed CM7 again because of camera and graphics problems with VQ.
The images and text on my phone get scrambled after using VQ for around 4-5 hours. The only solution was to reboot. Therefore, i came back to CM7.
Thanks anyways
30% album art shows for me too. Probably something to do with ics roms right now. I ve tried virtuous quattro rc3, androdmadus v11, and cm9 unofficial. Same on all of them.
Sent from my HTC Vision using XDA App

[Q] I can't make calls when I installed Desire Z HBOOT!?

I wanted to try sense ui so i migrated to the desire Z HBOOT but now i can't make calls! Apparently people can hear me but i can't hear them. I tried updating the radio and rom and that didnt help at all. im still able to send text, browse the web over 3g/4g, etc. Anyone else have a problem like this or a solution? I'll even go back to the G2 HBOOT since this is a T-Mobile G2..
Thanks in advance!

[Q] COS-Bravo-ICS - problem reconnecting with 2G or 3G after Wifi connection

Hi,
I'm using the COS-Bravo - ICS [21-May-2012] on my phone. Since the first version I flashed I've been having the same problem, but as the ROM is under development, I thought the problem would get fixed in some update. It still hasn't so I'm reporting it.
When loosing a WIFI connection, the phone must switch to a 2G or 3G network. This doesn't happen. Mostly the WIFI icon disappears as it disconnects and the signalstatus doesn't change (no Edge, Gprs or Hdspa is added). When I go to Airplane mode and back or when I switch between 2G/3G, the connection is repaired and the data-connection works again.
I've also noticed this problem with other ICS roms (Sanvold and BCM)
Does anybody have a clue what this could be?
Radio
What radio version do you have?
Its recommended to have the latest radio.
You can find the latest radio here: http://forum.xda-developers.com/showthread.php?t=687464
Of course the latest radio. ;-)
I have the same issue. When turning wifi off, my Desire doesn´t get a mobile connection though it´s showing, that i would be connected.
Switching to 3g and back doesn´t work for me.
Peter Pancake said:
I have the same issue. When turning wifi off, my Desire doesn´t get a mobile connection though it´s showing, that i would be connected.
Switching to 3g and back doesn´t work for me.
Click to expand...
Click to collapse
Same problem here with Sandvolds ICS
I have this problem nearly 2 years now on every rom (stock eclair, froyo and cm7) and on every radio version, so I guess it is hardware depended.
Correct me if i am wrong.
What I do is switching to airplane mode and back, so i have to enter my PIN again.
Maybe there is a soltution, cause this is really drving me nuts
Thx
With the newest version (01-06-2012) the problem seems to be solved (for me). Perhaps you should give it a try.
I´ve been glad to hasty. It still does not work. Neither does it to switch between 2g and 3g. But the airplane-"hack" does work for me too.
I have same problem with COS ROM. Mobile internet connection after using telephone as wifi modem do'nt working successfully.... i need reboot phone, airplane mode not solving this problem..
Hi!
Same problem here (HTC Desire Bravo, GSM, Cos-Bravo 1st June, latest radio).
This "bug" is present in every ICS Rom and as well in some GB Roms I tried. So far, the RSK ROM Sense 3.5 with amaze cam doesn't have this issue.
I hope someone will get to it. I'm more than ready to donate if someone will be able to solve this out with next build.
Thanks.
miki007s said:
Hi!
Same problem here (HTC Desire Bravo, GSM, Cos-Bravo 1st June, latest radio).
This "bug" is present in every ICS Rom and as well in some GB Roms I tried. So far, the RSK ROM Sense 3.5 with amaze cam doesn't have this issue.
I hope someone will get to it. I'm more than ready to donate if someone will be able to solve this out with next build.
Thanks.
Click to expand...
Click to collapse
To judge from my own experience - I'm still seeing this problem six months later - it has not been fixed yet. Or does it only affect a subset of Desires?
I'm experiencing it using a GB ROM - Mildwild 4.7, though it was there in 4.6 as well. I can only assume it is in the ROMs, as I get it on two different handsets, a PVT3 running radio-5.17.05.23 and a PVT1 rrunning radio-5.11.05.27.
cheers,
Bryangb
Remove the skipbrokendatacall entry in build.prop file. This will not completely resolve the problem but will make it very much manageable.
Check your APN Settings and try to set APN-Type to default only.
Sent from my A500 using xda app-developers app
xsreality said:
Remove the skipbrokendatacall entry in build.prop file. This will not completely resolve the problem but will make it very much manageable.
Click to expand...
Click to collapse
Thanks, but can't find that in my build.prop file.
kla960 said:
Check your APN Settings and try to set APN-Type to default only.
Click to expand...
Click to collapse
OK, done - now to see if it makes a difference...

Categories

Resources