Related
According to ROM Mgr, I have successfully flashed CWM 3.0.0.8 but when I boot into Recovery, it shows 2.5.0.1. Also when I try to flash a new ROM with ROM Mgr, I get error msg saying to check log. The only way I can flash a new ROM is to do the Update.zip thing. Nandroid seems to work ok. What am I doing wrong?
Sometimes you have to flash it twice to get it to take. Dunno why.
hope that helps.
I've tried that several times. ROM Mgr says that 3.0.0.8 has successfully flashed but Recovery says otherwise. Has to be related to the fact that ROM Mgr will not flash any different ROMs. Flashing with Update.zip doesn't give the option to wipe before reflash which worries me a little. How drastic will I have to get to fix this?
budman 53 said:
I've tried that several times. ROM Mgr says that 3.0.0.8 has successfully flashed but Recovery says otherwise. Has to be related to the fact that ROM Mgr will not flash any different ROMs. Flashing with Update.zip doesn't give the option to wipe before reflash which worries me a little. How drastic will I have to get to fix this?
Click to expand...
Click to collapse
depending on what your flashing needs are, you could try to go to rom manager and flash alternate recovery ra_gnm v1.8.1 I have used it and it worked fine for me. not sure if it supports the new scripting for clockwork after 3.0.0.XX. you could also try flashing the alternate recovery and then flash clockwork back right away see if it sticks that way.
I was having the same problem i would flash in RM and when I booted the phone it will still have the 2.5 version of CW.. but Some one here in the forum gave me this file and it work just fine.... dont flash it in recovery just put it your root sdcard and power off and them power on + Vol - and you should have 3.0.8 hope it works....
I have the exact same problem as described above.... I tried the PB31IMG.zip and had no luck any other suggestions ?
bwickes1 said:
I have the exact same problem as described above.... I tried the PB31IMG.zip and had no luck any other suggestions ?
Click to expand...
Click to collapse
I tried this. No luck. I also tried flashing several alternate CWMs. They all show as being successfully flashed in RM, but when I boot to recovery, 2.5.0.1 still prevails. ???????
budman 53 said:
I tried this. No luck. I also tried flashing several alternate CWMs. They all show as being successfully flashed in RM, but when I boot to recovery, 2.5.0.1 still prevails. ???????
Click to expand...
Click to collapse
See this thread:
http://forum.xda-developers.com/showthread.php?t=970032
The OP contains lots of advice for getting 3.0.0.8 installed and working properly.
Perhaps most importantly, make sure "Erase recovery" is checked in Rom Manager settings.
bwickes1 said:
I have the exact same problem as described above.... I tried the PB31IMG.zip and had no luck any other suggestions ?
Click to expand...
Click to collapse
When flashing in hoot your SD card has to be formatted fat32 or it won't work..... check and see if your formatted correctly..... if not back up your files on your pc then reformat and it should work
Sent from my Incredible using XDA App
Don't know whether you solved your problem in the last 30 days, but my suggestion is DON'T USE ROM MANAGER TO UPDATE CLOCKWORK.
I downloaded the most recent CWM from Doug Piston's site, renamed it to PB31IMG.zip and put it in the root directory of my SD card, booted into Bootloader, when it recognized the update file, I ran the update and got to 3.0.0.8.
Meanwhile, ROM Manager still reports that I have an earlier version of CWM, and I've even gone so far as to update the .settings file to correct it, but ROM Manager blithely goes about its business ignorant of the real recovery.
Since my ROM isn't supported by ROM Manager, I figure I can just leave ROM Manager alone ---- I've never trusted backups run through it anyway; I always run Nandroids from Recovery.
tdiman said:
See this thread:
http://forum.xda-developers.com/showthread.php?t=970032
The OP contains lots of advice for getting 3.0.0.8 installed and working properly.
Perhaps most importantly, make sure "Erase recovery" is checked in Rom Manager settings.
Click to expand...
Click to collapse
I love you!!!
My DINC is latest Gingerbread 2.3.4.
I'm trying to get rid of the awful 'low memory' problems that I'm having on a daily basis.
I'm following this XDA guide
[HOW TO] Fix the "Low on space" problem (in plain English)
The PC drivers got installed fine.
But when I run unrevoked 3.22 it gets stuck on 'Rebooting into recovery'. At that point the phone shows the screen: ClockworkMod Recovery v5.0.2.0 (the screen has 9 selectable options in blue text). I can select the first option 'reboot system now' and the phone seems untouched. I've tried it a few times but keep running into the same problem.
Any ideas??
If you're in Recovery (oh that sounds so rude lol) press the optical button to select options. The power button functions as the back button while in recovery.
SlimSnoopOS said:
If you're in Recovery (oh that sounds so rude lol) press the optical button to select options. The power button functions as the back button while in recovery.
Click to expand...
Click to collapse
OK...but do you have any idea why I can't complete the process?
citysoundman said:
OK...but do you have any idea why I can't complete the process?
Click to expand...
Click to collapse
Trying to be delicate you're done! you now can download this file from androidsu (removed for it being junk) and then put it on to your SD card and flash it by going to install zip from SD and then find this file and say yes to flash. It will flash the superuser binary and the application effectively rooting your phone. you may also want to flash the s-off tool from unrevoked called unrevoked forever from here to give you the ability to flash alternate radios or splash screens or whatever you decide to!
http://unrevoked.com/rootwiki/doku.php/public/forever
I hope this helps!
EDIT: superuser binary link: http://dinc.does-it.net/Superuser/
nschiwy said:
Trying to be delicate you're done! you now can download this file from androidsu downloads.noshufou.netdna-cdn.com/superuser/Superuser-3.1.3-arm-signed.zip and then put it on to your SD card and flash it by going to install zip from SD and then find this file and say yes to flash. It will flash the superuser binary and the application effectively rooting your phone. you may also want to flash the s-off tool from unrevoked called unrevoked forever from here to give you the ability to flash alternate radios or splash screens or whatever you decide to!
unrevoked.com/rootwiki/doku.php/public/forever
I hope this helps!
Click to expand...
Click to collapse
I'm done? Sorry but I'm a bit confused - The instructions say in the last step:
-Once it's done, unplug your phone and ensure that a "Superuser Permissions" application is inside your app drawer.
Shouldn't I be seeing a new app named 'superuser permissions'? Since there's no app with that name I assumed unrevoked did not complete it's process.
Can I somehow verify that unrevoked was successful?
The fact that it has flashed clockwork is success enough, I know you want to be thorough but I have done this with my own phone as well as a friend's with perfect success of rooting the phone. My Inc now runs ics with perfect ease after completing the process you have. And trust me, the hardest part is behind you. If you download the files I cited above then you will flash them both using your new recovery then you will be set to do endless nods to your phone. My advice though before flashing anything to your phone is to check the Md5 carefully to male sure you don't flash corrupted files to your phone
nschiwy said:
The fact that it has flashed clockwork is success enough, I know you want to be thorough but I have done this with my own phone as well as a friend's with perfect success of rooting the phone. My Inc now runs ics with perfect ease after completing the process you have. And trust me, the hardest part is behind you. If you download the files I cited above then you will flash them both using your new recovery then you will be set to do endless nods to your phone. My advice though before flashing anything to your phone is to check the Md5 carefully to male sure you don't flash corrupted files to your phone
Click to expand...
Click to collapse
Hey thanks for the clarification. I will go ahead and flash the files - I'll post back with the results.
citysoundman said:
I'm done? Sorry but I'm a bit confused - The instructions say in the last step:
-Once it's done, unplug your phone and ensure that a "Superuser Permissions" application is inside your app drawer.
Shouldn't I be seeing a new app named 'superuser permissions'? Since there's no app with that name I assumed unrevoked did not complete it's process.
Can I somehow verify that unrevoked was successful?
Click to expand...
Click to collapse
u can verify by going to google play and download root checker or download whatever app that need root to function.
as for superuser app, sometimes that app just didn't show, in order for it to show is you have to manually flash it in clockworkmod recovery, just like nschiwy say. its actually fine to do that so don't be worried , as a precaution cek the MD5 to make sure you dont flash a bad zip file.
Bonkurei said:
u can verify by going to google play and download root checker or download whatever app that need root to function.
as for superuser app, sometimes that app just didn't show, in order for it to show is you have to manually flash it in clockworkmod recovery, just like nschiwy say. its actually fine to do that so don't be worried , as a precaution cek the MD5 to make sure you dont flash a bad zip file.
Click to expand...
Click to collapse
Thanks guys - your feedback is very much appreciated!
Sorry for all the questions here -
where can I find the md5 for this superuser zip file? I've been searching around but can't find it...
citysoundman said:
Thanks guys - your feedback is very much appreciated!
Sorry for all the questions here -
where can I find the md5 for this superuser zip file? I've been searching around but can't find it...
Click to expand...
Click to collapse
if im not mistaken the latest superuser version is "Superuser-3.0.7-efghi-signed.zip" if ur using this then the MD5 would be b897748a40980ec32998a33f42338b5e
Bonkurei said:
if im not mistaken the latest superuser version is "Superuser-3.0.7-efghi-signed.zip" if ur using this then the MD5 would be b897748a40980ec32998a33f42338b5e
Click to expand...
Click to collapse
For some reason your md5 number doesn't match with the md5 I downloaded of either the 3.1.3 zip mentioned in this thread, or the 3.0.7 zip you mention.
Can you provide a link to the md5 info?
citysoundman said:
For some reason your md5 number doesn't match with the md5 I downloaded of either the 3.1.3 zip mentioned in this thread, or the 3.0.7 zip you mention.
Can you provide a link to the md5 info?
Click to expand...
Click to collapse
here's the link http://goo.im/superuser/
I have a bad situation here - my DINC is now stuck rebooting over and over into the white startup screen.
Here's what I did -
I copied to my SD card the 3.1.3 zip file that nschiwy linked in his post. Then I did this:
6.) Power down, then go back to hboot. Use the volume keys to select "Recovery", press power button to select and enter Clockwork. Now select "Install zip from SD card", then "Choose zip from SD card", then navigate to the Superuser zip you placed on the card in step 3. Select and load it. (NOTE: For those that don't typically load zips directly in CWM, use the trackpad button to make selections in CWM, the power button brings you back one menu.)
All this went fine. I used the Recovery command 'power off'. But then when I powered up it now is stuck in reboot. I did flash again from the zip file on the SD card, but same problem.
I see the troubleshooting tips posted here (I will copy it below). Pulling the battery didn't help. And I can't seem to reflash from the unrevoked app because my DINC just keeps boot-cycling...
What shoudl I do??
My phone keeps rebooting over and over and I can't do anything!
Pull out the battery, wait for 15 seconds, and put it back in and turn the phone back on. If it still keeps rebooting, pull out/re-insert the battery again, go into hboot (see above answer) and try the following steps. You can stop as soon as one of them works!
1. Restore a backup that you made in a previous step (if you have one).
2. Reflash the .img file from Step #8.
3. Flash the .img file here: http://dinc.does-it.net/wildstang83_...2_11232011.zip (note: this one will take you back to stock, so you'll have to start the guide over).
Bonkurei said:
here's the link http://goo.im/superuser/
Click to expand...
Click to collapse
Thanks Bonkurei
citysoundman said:
1. Restore a backup that you made in a previous step (if you have one).
2. Reflash the .img file from Step #8.
3. Flash the .img file here: http://dinc.does-it.net/wildstang83_...2_11232011.zip (note: this one will take you back to stock, so you'll have to start the guide over).[/I]
Click to expand...
Click to collapse
if im not mistaken number 3 is an RUU, which mean when u flash it, it will take u back to stock, please cmiiw.
citysoundman said:
Thanks Bonkurei
Click to expand...
Click to collapse
your welcome, btw i think version 3.1.3 is for arm devices, cmiiw.
Bonkurei said:
if im not mistaken number 3 is an RUU, which mean when u flash it, it will take u back to stock, please cmiiw.
your welcome, btw i think version 3.1.3 is for arm devices, cmiiw.
Click to expand...
Click to collapse
Can you please clarify for me - flashing the number 3 means to load it into unrevoked app as a custom image?
I'm not sure how to get unrevoked to recognize my DINC because it just keeps boot-cycling..
Bonkurei said:
your welcome, btw i think version 3.1.3 is for arm devices, cmiiw.
Click to expand...
Click to collapse
So I should try 3.0.7 then...if I can get it onto my SD card...hmmmm
citysoundman said:
Can you please clarify for me - flashing the number 3 means to load it into unrevoked app as a custom image?
I'm not sure how to get unrevoked to recognize my DINC because it just keeps boot-cycling..
Click to expand...
Click to collapse
as far as my understanding of those words, i think its like this :
1. skip cause u dont have 1
2. reflash clockwordmod but since ur phone keep bootloop, i think u gotta flash it in HBOOT.
3. reflash rom by going into clockworkmod recovery and install zip from sdcard.
again cmiiw.
btw can u go to clockworkmod recovery via recovery in HBOOT menu? if u can i think u can skip no 1 and 2 and just go install zip from sdcard in clockworkmod recovery menu.
but idk if its save to do that.
citysoundman said:
So I should try 3.0.7 then...if I can get it onto my SD card...hmmmm
Click to expand...
Click to collapse
i think u can try it, before flash that stock rom.
do you have a card reader?
if u dont have 1, can you go to clockworkmod recovery menu?
if u can go to clockworkmod recovery menu, just go to mounts and storage and then mount USB storage plug the cable and voila it will detect ur sdcard.
Bonkurei said:
as far as my understanding of those words, i think its like this :
1. skip cause u dont have 1
2. reflash clockwordmod but since ur phone keep bootloop, i think u gotta flash it in HBOOT.
3. reflash rom by going into clockworkmod recovery and install zip from sdcard.
again cmiiw.
btw can u go to clockworkmod recovery via recovery in HBOOT menu? if u can i think u can skip no 1 and 2 and just go install zip from sdcard in clockworkmod recovery menu.
but idk if its save to do that.
i think u can try it, before flash that stock rom.
do you have a card reader?
if u dont have 1, can you go to clockworkmod recovery menu?
if u can go to clockworkmod recovery menu, just go to mounts and storage and then mount USB storage plug the cable and voila it will detect ur sdcard.
Click to expand...
Click to collapse
Yes I can get to Recovery via HBOOT, and yes I can mount USB storage - that is great thanks! I will try to flash the 3.0.7 zip from Recovery. If it doesn't work then I can try and flash the Tip #3 zip file from Recovery.
citysoundman said:
Yes I can get to Recovery via HBOOT, and yes I can mount USB storage - that is great thanks! I will try to flash the 3.0.7 zip from Recovery. If it doesn't work then I can try and flash the Tip #3 zip file from Recovery.
Click to expand...
Click to collapse
great, just do that. i hope ur device would be working flawlesly again .
Hi all, I was on AKOP's milestone ROM before trying to flash their newest one. I did not do anything to the kernel or anything by the way.
I'm using ClockworkMod Recovery v6.0.2.7 and I rebooted into recovery and flashed super dark side wipe and then JB-MR1 and then gapps.
I went through the entire start up process with inputting your information and then finally I got into the actual home screen. I clicked around to see how the UI looked and then decided to reboot through the menu.
It was in the rebooting animation icon for at least 30 min before I decided to pull the battery. I want to wipe and start again but my cwm recovery isn't installing anything.
EDIT: The phone still works as I can boot into the phone and use it. I'm trying to reboot now: power button hold>reboot, but its taking ages still...need help on this reboot thanks
Any help here?
EDIT 2: Pretty much phone is "functional" but any method of trying to reboot or reboot into recovery fails
Thanks all!
Check the Md5 hash to make sure it is a good download.
Otherwise it sounds like it is CWM that can be causing issues.
Which version of gapps are you flashing?
8Fishes said:
Check the Md5 hash to make sure it is a good download.
Otherwise it sounds like it is CWM that can be causing issues.
Which version of gapps are you flashing?
Click to expand...
Click to collapse
Checked the Md5 with an app and it matches up perfectly with akop's main website.
I'm running 6.0.2.8 cwm. Is it even possible that its cwm? I used the same version to flash AKOPs new ROM.
and im flashing gapps-jb-20121212-signed.zip
Does it have anything to do with my kernel?
You aren't supposed to use super wipe with cwm 6. That is probably your problem.
meekrawb said:
You aren't supposed to use super wipe with cwm 6. That is probably your problem.
Click to expand...
Click to collapse
Thanks so much for pinpointing the problem! Is there a fix to this?
And is this the recommended method of flashing? (Taken from http://forum.xda-developers.com/showthread.php?t=1926754):
1. Wipe factory data/reset
2. Wipe cache
3. Go into mounts and storage
4. Format /system
5. Format /data
6. Format /cache
7. Enter advanced
8. Wipe dalvik
9. Flash ROM then gapps
10. Reboot and let the ROM settle for 5-10 minutes if flashing TW ROMs, this step is unnecessary for AOSP based ROMs.
11. (Optional) if flashing a new radio flash AFTER the ROM has been initially booted for the first time. No wipes are necessary when flashing a new radio but it HAS to be flashed after the ROM is loaded and settled in. Flashing a radio first and then a ROM has caused issues like the phone not even recognizing there is a network for it. ( phone remains in emergency mode )
Edit:
Pretty sure my phone is bricked now... in a continuous boot up loop... BUT i can still access recovery
Ostyrion said:
Thanks so much for pinpointing the problem! Is there a fix to this?
Edit:
Pretty sure my phone is bricked now... in a continuous boot up loop... BUT i can still access recovery
Click to expand...
Click to collapse
Yes, those are the proper flashing instructions for CWM6.
It sounds like you have a soft brick. I think your best bet is to Odin back to stock. Have a look here:
http://forum.xda-developers.com/showthread.php?t=1858435
Good luck.
meekrawb said:
Yes, those are the proper flashing instructions for CWM6.
It sounds like you have a soft brick. I think your best bet is to Odin back to stock. Have a look here:
http://forum.xda-developers.com/showthread.php?t=1858435
Good luck.
Click to expand...
Click to collapse
You sir are a saving grace!
I'll try this at once!!
I have 2 questions though.
1. in regard to kernels. Do i need to do anything (aka change my kernel?) Or is the stock kernel suitable for 4.2.1?
2. If i cant boot into my phone to get to my SD card, how do i download and put files onto my phone?
Ostyrion said:
You sir are a saving grace!
I'll try this at once!!
I have 2 questions though.
1. in regard to kernels. Do i need to do anything (aka change my kernel?) Or is the stock kernel suitable for 4.2.1?
2. If i cant boot into my phone to get to my SD card, how do i download and put files onto my phone?
Click to expand...
Click to collapse
Stock kernel is just fine.
Odin will flash the stock OS to your phone from the computer. Make sure to read the Odin directions a few times before trying it because it could hard brick if something goes wrong.
meekrawb said:
Stock kernel is just fine.
Odin will flash the stock OS to your phone from the computer. Make sure to read the Odin directions a few times before trying it because it could hard brick if something goes wrong.
Click to expand...
Click to collapse
I'm trying to read through the thread you gave me but its kinda cluttered and its hard finding exactly where to start...pointers?
From the first post of that thread you will need
1. The prerequisites
-Odin
-Drivers
-Kies(dunno if this is mandatory but I guess it couldn't hurt.)
2. T-Mobile t989 uvlhi stock ROM(Odin)
You will need some type of zip software to extract the files from this.
3. Follow the steps under Installation - Odin installation(skip step 1)
After you get the stock ROM running you can install custom recovery and then flash your custom ROMs.
meekrawb said:
From the first post of that thread you will need
1. The prerequisites
-Odin
-Drivers
-Kies(dunno if this is mandatory but I guess it couldn't hurt.)
2. T-Mobile t989 uvlhi stock ROM(Odin)
You will need some type of zip software to extract the files from this.
3. Follow the steps under Installation - Odin installation(skip step 1)
After you get the stock ROM running you can install custom recovery and then flash your custom ROMs.
Click to expand...
Click to collapse
IT WORKS!!!! I LOVE YOU!! THANK YOU SO SO SO SO SO MUCH!!
THANK YOU THANK YOU THANK YOU!!
So now that I'm back on stock ROM, is my phone still rooted? Or do i need to reroot?
Edit: Downloaded a root checker. Looks like I need to reroot. Thank you again SOOOOO much!!!
Ostyrion said:
IT WORKS!!!! I LOVE YOU!! THANK YOU SO SO SO SO SO MUCH!!
THANK YOU THANK YOU THANK YOU!!
So now that I'm back on stock ROM, is my phone still rooted? Or do i need to reroot?
Click to expand...
Click to collapse
You are welcome. You are now unrooted so you have to download the recovery of your choice to the internal SD card and flash it from the stock recovery. After you reboot back into recovery you can flash a ROM and you will be rooted.
meekrawb said:
You are welcome. You are now unrooted so you have to download the recovery of your choice to the internal SD card and flash it from the stock recovery. After you reboot back into recovery you can flash a ROM and you will be rooted.
Click to expand...
Click to collapse
So in essence, once i have cwm/twrp on my phone, i have "root"?
Just to check:
1. download cwm recovery
2. via usb put onto phone.
3. reboot into recovery
4. flash cwm
5. restart phone
6. copy AOKP ROM onto phone
7. reboot into recovery
8. flash AOKP ROM?
Again, i cant thank you enough!
Ostyrion said:
So in essence, once i have cwm/twrp on my phone, i have "root"?
Just to check:
1. download cwm recovery
2. via usb put onto phone.
3. reboot into recovery
4. flash cwm
5. restart phone
6. copy AOKP ROM onto phone
7. reboot into recovery
8. flash AOKP ROM?
Again, i cant thank you enough!
Click to expand...
Click to collapse
That should do it. You won't be rooted until you install a custom ROM though(they come already rooted).
meekrawb said:
That should do it. You won't be rooted until you install a custom ROM though(they come already rooted).
Click to expand...
Click to collapse
Apparently stock recovery doesn't allow to install via internal SD card so I need odin to flash cwm dont i?
What boxes do i need checked besides the PDA checkbox?
Ostyrion said:
Apparently stock recovery doesn't allow to install via internal SD card so I need odin to flash cwm dont i?
What boxes do i need checked besides the PDA checkbox?
Click to expand...
Click to collapse
If you download the flashable zip from the first post here:
http://forum.xda-developers.com/showthread.php?p=30497342
you should be able to flash it from stock recovery. If it doesn't work I will have to look up how to install it with Odin.
meekrawb said:
If you download the flashable zip from the first post here:
http://forum.xda-developers.com/showthread.php?p=30497342
you should be able to flash it from stock recovery. If it doesn't work I will have to look up how to install it with Odin.
Click to expand...
Click to collapse
I actually got cwm 5.0.2.7 on my phone through odin. I just need root now to upgrade it to the most recent version.
I've been seeing busybox paired with superuser.
Do i need busybox? Or can i just flash superuser through cwm recovery 5.0.2.7?
Ostyrion said:
I actually got cwm 5.0.2.7 on my phone through odin. I just need root now to upgrade it to the most recent version.
I've been seeing busybox paired with superuser.
Do i need busybox? Or can i just flash superuser through cwm recovery 5.0.2.7?
Click to expand...
Click to collapse
Why do you need root? You should be able to just flash the newer cwm zip.
Here is a superuser zip that I used successfully on my t989:
meekrawb said:
Here is a superuser zip that I used successfully on my t989:
Click to expand...
Click to collapse
Thanks for the file!
I downloaded cwm from this site:
http://www.clockworkmod.com/rommanager
but it comes as an img file...and I dont seem to be able to flash that from recovery
Can anyone help.....
I have tried to flash a few custom roms but everytime I go to install it says installation aborted (BAD). I have downloaded the same rom a couple of times in case it was a bad download, but still get the same result. I flashed the leaked 4.3 via odin before trying to install custom roms, could this be the problem?. I am using philz recovery.
Anybody got any ideas what I'm doing wrong?.
Thanks in advance
Scotty
tuktukscotty said:
Can anyone help.....
I have tried to flash a few custom roms but everytime I go to install it says installation aborted (BAD). I have downloaded the same rom a couple of times in case it was a bad download, but still get the same result. I flashed the leaked 4.3 via odin before trying to install custom roms, could this be the problem?. I am using philz recovery.
Anybody got any ideas what I'm doing wrong?.
Thanks in advance
Scotty
Click to expand...
Click to collapse
go with a clean wipe,system included and flash the rom. make sure u verify the md5 of the rom downloaded and use latest philz version and make a backup of rom just to be safe before flashing anything, the latest philz support 4.3 flashing
shhbz said:
go with a clean wipe,system included and flash the rom. make sure u verify the md5 of the rom downloaded and use latest philz version and make a backup of rom just to be safe before flashing anything, the latest philz support 4.3 flashing
Click to expand...
Click to collapse
I did a full wipe before trying to install. Cleared cache etc. The rom I really want to install is Dr Ketan's. I don't understand how/what you mean by checking the md5??
tuktukscotty said:
I did a full wipe before trying to install. Cleared cache etc. The rom I really want to install is Dr Ketan's. I don't understand how/what you mean by checking the md5??
Click to expand...
Click to collapse
http://www.winmd5.com/ download this locate the downloaded rom file and it will calculate the md5 and then go to the link from where u downloaded v3 ketan rom u will see md5 details there just paste at the bottom and verify to see if it matches fine if not your file download is corrupt.
are u on latest philz recovery
shhbz said:
http://www.winmd5.com/ download this locate the downloaded rom file and verify it will calculate the md5 and then go to the link from where u downloaded v3 ketan rom u will see md5 details there just paste at the bottom to see if it matches fine if not your file download is corrupt.
are u on latest philz recovery
Click to expand...
Click to collapse
I'm using philz touch 4.6.4
tuktukscotty said:
I'm using philz touch 4.6.4
Click to expand...
Click to collapse
use this http://d-h.st/iII i
i hope u have n7100 international version as u wish to flash keten rom
after flashing latest philz make a backup of rom and flash http://d-h.st/fWr u lose everything from internal it will reboot back to recovery.
procced with v3 install and just wipe cache and dalvik before restart after flashing
shhbz said:
use this http://d-h.st/iII i
i hope u have n7100 international version as u wish to flash keten rom
after flashing latest philz make a backup of rom and flash http://d-h.st/fWr u lose everything from internal it will reboot back to recovery.
procced with v3 install and just wipe cache and dalvik before restart after flashing
Click to expand...
Click to collapse
I have a UK bought note 2
tuktukscotty said:
I have a UK bought note 2
Click to expand...
Click to collapse
yes that's fine if ur box says n7100 and below battery check
shhbz said:
yes that's fine if ur box says n7100 and below battery check
Click to expand...
Click to collapse
Yes defo says GT-N7100
tuktukscotty said:
Yes defo says GT-N7100
Click to expand...
Click to collapse
you are good to proceed with the link file
shhbz said:
you are good to proceed with the link file
Click to expand...
Click to collapse
I have installed the later philz recovery. Just going to try and flash again
tuktukscotty said:
I have installed the later philz recovery. Just going to try and flash again
Click to expand...
Click to collapse
Nope!.
Still unable to install. It says:
-- Installing: /sdcard/DrKetan_Custom_ROM_V3Hybrid.zip
Finding update package...
Opening update package...
E:Can't open /sdcard/DrKetan_Custom_ROM_V3Hybrid.zip
(bad)
Installation aborted
press any key to continue.
What am I doing wrong????? This is really so frustrating. Have I done something when installing the leaked version of 4.3 which is now stopping anything working??. Anybody got any ideas???.
Someone out there must know what I'm doing wrong...........please help.
shhbz said:
you are good to proceed with the link file
Click to expand...
Click to collapse
I tried and tried and tried but couldn't get it to install. I then decied to reflash back to 4.1.2 stock via odin. Then tried to install Dr's again but still wouldn't work. I then flashed the leaked 4.3 via odin and repeated the Dr's install and it worked!!!!!!.
Thanks for the advice.
Scotty.
Hi.
I'm trying to unlock my bootloader on Xperia S in order to flash CM11 ROM.
I followed this website: unlockbootloader.sonymobile.com/instructions and I'm stuck at #9.
Download and unzip this file. This is the standard android_winusb.inf-file, with a few lines of code added to enable Fastboot to support Sony and Sony Ericsson devices. Make sure you are running Google USB Driver package revision 4 or higher in your Android SDK. You can see current Google USB Driver package revision in the SDK Manager.
Click to expand...
Click to collapse
As I'm using MAC, I don't have Google USB Driver and website doesn't mention anything for MAC users.
I can't fastboot my phone. :crying:
Please help.
Thanks.
eros101 said:
Hi.
I'm trying to unlock my bootloader on Xperia S in order to flash CM11 ROM.
I followed this website: unlockbootloader.sonymobile.com/instructions and I'm stuck at #9.
As I'm using MAC, I don't have Google USB Driver and website doesn't mention anything for MAC users.
I can't fastboot my phone. :crying:
Please help.
Thanks.
Click to expand...
Click to collapse
Did you download android sdk? and in sdk manager did you download everything you need?
Pablosch23 said:
Did you download android sdk? and in sdk manager did you download everything you need?
Click to expand...
Click to collapse
Yes, I managed to download android SDK and everything except the Google USB Driver, because it doesn't exist on MAC.
Anyway, I managed to solve my own problem using a FlashTool here: flashtool.net/download.php
Now my problem is solved. The bootloader is finally unlocked!! :victory:
My next problem: I would like to flash CM11 KitKat. Is there a step-by-step guide?
I found some threads in the development section on what to download etc etc, but it doesn't tell me how to install or run it.
I'm an absolute noob at this.
eros101 said:
Yes, I managed to download android SDK and everything except the Google USB Driver, because it doesn't exist on MAC.
Anyway, I managed to solve my own problem using a FlashTool here: flashtool.net/download.php
Now my problem is solved. The bootloader is finally unlocked!! :victory:
My next problem: I would like to flash CM11 KitKat. Is there a step-by-step guide?
I found some threads in the development section on what to download etc etc, but it doesn't tell me how to install or run it.
I'm an absolute noob in this.
Click to expand...
Click to collapse
Install a recovery and wipe data, cache partition and dalvik cache, flash the ROM and then the google apps "gapps"
Pablosch23 said:
Install a recovery and wipe data, cache partition and dalvik cache, flash the ROM and then the google apps "gapps"
Click to expand...
Click to collapse
Thanks for your reply.
I'm afraid that's a bit too advanced for me. Do you have a link to a step-by-step guide (preferably for MAC)?
Do I still need to install a recovery, since my phone data is already gone while unlocking the bootloader?
How do I flash the ROM on Xperia S? Is there a guide for this?
edit: I wanted to install this http://forum.xda-developers.com/showthread.php?t=2555243 but I don't know how. I downloaded the .zip file. What's next?
eros101 said:
Thanks for your reply.
I'm afraid that's a bit too advanced for me. Do you have a link to a step-by-step guide (preferably for MAC)?
Do I still need to install a recovery, since my phone data is already gone while unlocking the bootloader?
How do I flash the ROM on Xperia S? Is there a guide for this?
edit: I wanted to install this http://forum.xda-developers.com/showthread.php?t=2555243 but I don't know how. I downloaded the .zip file. What's next?
Click to expand...
Click to collapse
Yes you need a recovery to flash the zip you downloaded, I've never used Mac to root/install recovery.., but here you have some guides that you can follow to install a recovery http://forum.xda-developers.com/showthread.php?t=2308493&highlight=unlocked
http://forum.xda-developers.com/showthread.php?t=2302393 good luck
Pablosch23 said:
Yes you need a recovery to flash the zip you downloaded, I've never used Mac to root/install recovery.., but here you have some guides that you can follow to install a recovery http://forum.xda-developers.com/showthread.php?t=2308493&highlight=unlocked
http://forum.xda-developers.com/showthread.php?t=2302393 good luck
Click to expand...
Click to collapse
Thanks again for your reply. Please bear with me. I'm done with recovery using the RecoveryX Tool, and I managed to root my phone!! Yay!! :good:
Now, how do I flash the .zip file that I downloaded here? http://forum.xda-developers.com/showthread.php?t=2555243
Do I use the FlashTool to flash this .zip?
another problem, I can't get into the recovery mode.
I tried rebooting the phone while pressing the volume button, also tried pressing the back key, and tried tapping the screen. Didn't work.
edit: I've read many sources that say wait until purple LED light blinks or wait until android logo shows etc etc, but my phone doesn't show any LED blinks at startup, nor does it have any android logo. Only the words Xperia and Sony appear.
eros101 said:
another problem, I can't get into the recovery mode.
I tried rebooting the phone while pressing the volume button, also tried pressing the back key, and tried tapping the screen. Didn't work.
edit: I've read many sources that say wait until purple LED light blinks or wait until android logo shows etc etc, but my phone doesn't show any LED blinks at startup, nor does it have any android logo. Only the words Xperia and Sony appear.
Click to expand...
Click to collapse
Try reinstalling the recovery, don't know I would recommend you to use doomlord's guides bro U can't fail
To flash the rom, go to recovery / install zip/ install zip from sdcard0 , select and flash it , don't forget to do a factory reset, wipe cache and dalvik cache which is in advanced option in recovery
Pablosch23 said:
Try reinstalling the recovery, don't know I would recommend you to use doomlord's guides bro U can't fail
To flash the rom, go to recovery / install zip/ install zip from sdcard0 , select and flash it , don't forget to do a factory reset, wipe cache and dalvik cache which is in advanced option in recovery
Click to expand...
Click to collapse
Mate, I'm stuck. For recovery, I refer to DoomLord http://forum.xda-developers.com/showthread.php?t=1594828 and he said,
The recovery in integrated into the kernel! so when u flash the kernel it will contain the recovery!
Click to expand...
Click to collapse
so a kernal is needed. I think he directed the downloads to this thread: http://forum.xda-developers.com/showthread.php?t=1557452
which he said,
[ how to install my kernel ] (v02 onwards) {NEW}
1. download the kernel package update.zip (it contain the updated wifi modules)
2. save the package update.zip to sdcard (on phone)
3. reboot phone and enter recovery
4. flash the kernel package update.zip
5. reboot phone and enjoy the kernel
Click to expand...
Click to collapse
Step 3 says enter recovery. How do I enter recovery? Just paste the .zip file into the SDcard and it will work??
eros101 said:
Mate, I'm stuck. For recovery, I refer to DoomLord http://forum.xda-developers.com/showthread.php?t=1594828 and he said,
so a kernal is needed. I think he directed the downloads to this thread: http://forum.xda-developers.com/showthread.php?t=1557452
which he said,
Step 3 says enter recovery. How do I enter recovery? Just paste the .zip file into the SDcard and it will work??
Click to expand...
Click to collapse
You can't enter to recovery if you don't have one whoa, You need to install the kernel which contains the recovery via fastboot(you need fasboot binaries you can find them in Sdk/platform-tools). Give me your hangouts if you need more help
I managed to flash the kernel using the FlashTool, managed to get CM11 KitKat on my phone!! Yay! First time ever!! :good::good:
How do I restore the data I had before? I can't find the backup app.