Develop Bugs

[Q] "Used" SD Card Causing Problem with Root? Now it's a brick...

I used Unrevoked to root my Incredible with no problems. When I copied some other ROMs to test, the phone wouldn't give me any options. It ran thru the following error message (in high speed...had to take a pic):
INCREDIBLE XD SHIP S-OFF
HBOOT-0.92.0000
MICROP-0417
TOUCH PANEL-ATMELCO3_16ac
RADIO-2.15.00.07.28
Jul 23 2010, 18:06:51
HBOOT
SD Checking...
Loading...[PB21DIAG.zip]
No image!
Loading...[PB31DIAG.nbh]
No image!
Loading...[PB31IMF.zip]
No image!
Loading...[PB31IMG.nbh]
No image or wrong image!​
Upon investigating this I think I realized my problem, but don't know how to resolve it: I pulled the stock SD Card from my new Incredible and dropped in my "used" Eris card (rooted, too). Now I have two sets of directories on the card; one from my old Eris and the new Incredible one. I'm guessing this is confusing the OS. Here's what I've tried:
* deleting the old Eris directories, but to no avail
* when going into Recovery, I have the SLCD problem with the screen not reading right, but since I can't get the phone to recognize another ROM, I can't address that problem
I'm thinking of reformatting the card, but worry that once I do that, how will the phone be able to even boot when it's looking for a ROM?
***UPDATE*** being impatient, a risk-taker and a man of adventure, I have now done myself in, I'm afraid. I went ahead and reformatted the SD card and to my surprise, when I restarted, it found the PB31IMG.zip and updated it. After it completed, it asked if I want to reboot, I selected "Yes" and now it won't boot at all. When I hold the power button it vibrates once and that's it. After that, nothing works. When I do a battery pull and hold power button again, it vibrates once and...nothing more.
Next steps or suggestions from those much smarter than I am?

Can you get into HBOOT, at least? Completely power down, then hold the volume down button while powering up. Also, reformat your SD card to FAT32. Look around the forum for the SLCD recovery.
Sent from my ADR6300 using XDA App

nachoport said:
I used Unrevoked to root my Incredible with no problems. When I copied some other ROMs to test, the phone wouldn't give me any options. It ran thru the following error message (in high speed...had to take a pic):
INCREDIBLE XD SHIP S-OFF
HBOOT-0.92.0000
MICROP-0417
TOUCH PANEL-ATMELCO3_16ac
RADIO-2.15.00.07.28
Jul 23 2010, 18:06:51
HBOOT
SD Checking...
Loading...[PB21DIAG.zip]
No image!
Loading...[PB31DIAG.nbh]
No image!
Loading...[PB31IMF.zip]
No image!
Loading...[PB31IMG.nbh]
No image or wrong image!​
Upon investigating this I think I realized my problem, but don't know how to resolve it: I pulled the stock SD Card from my new Incredible and dropped in my "used" Eris card (rooted, too). Now I have two sets of directories on the card; one from my old Eris and the new Incredible one. I'm guessing this is confusing the OS. Here's what I've tried:
* deleting the old Eris directories, but to no avail
* when going into Recovery, I have the SLCD problem with the screen not reading right, but since I can't get the phone to recognize another ROM, I can't address that problem
I'm thinking of reformatting the card, but worry that once I do that, how will the phone be able to even boot when it's looking for a ROM?
***UPDATE*** being impatient, a risk-taker and a man of adventure, I have now done myself in, I'm afraid. I went ahead and reformatted the SD card and to my surprise, when I restarted, it found the PB31IMG.zip and updated it. After it completed, it asked if I want to reboot, I selected "Yes" and now it won't boot at all. When I hold the power button it vibrates once and that's it. After that, nothing works. When I do a battery pull and hold power button again, it vibrates once and...nothing more.
Next steps or suggestions from those much smarter than I am?
Click to expand...
Click to collapse
Why were you trying to flash a new PB31IMG.zip? To flash a new ROM, you should have booted into recovery and selected "install zip from sd card," navigated to wherever the zip (such as SkyRaider_33_Sense_Final.zip) is located and installed from there.
BTW... those are not error messages. The phone will search for those files whenever you boot into the bootloader. After it cycles through them, you have the option of selecting recovery.

The memory card shouldn't have mattered. I used my Eris card on mine with no problems.
Sent from my Virtuous Incredible

i'm actually running into the same exact problem...any help at all would be wonderful

first do a search here on xda for clockworkmod on crack...that file has a fix for your slcd in recovery.download that first and rename it to pb31img.zip put it right on the sdcard not in any folder. now download a rom from one of the forums to a computer, any rom for dinc, put your sdcard into the pc. put the rom u DL on the sd somewhere youll remember. unmount the card put it in your phone, hold vol down and power this takes you to the bootloader. now it will automatically search for pb31img.zip, click yes let it update.normally you click no but this is an exception, now press vol down to select recovery. takes you to recovery, goto install zip from sdcard, choose file on sscard, now goto that rom I said to remember. click yes, should be good to go
Sent from my ADR6300 using XDA App

pete_kowalski83 said:
first do a search here on xda for clockworkmod on crack...that file has a fix for your slcd in recovery.download that first and rename it to pb31img.zip put it right on the sdcard not in any folder. now download a rom from one of the forums to a computer, any rom for dinc, put your sdcard into the pc. put the rom u DL on the sd somewhere youll remember. unmount the card put it in your phone, hold vol down and power this takes you to the bootloader. now it will automatically search for pb31img.zip, click yes let it update.normally you click no but this is an exception, now press vol down to select recovery. takes you to recovery, goto install zip from sdcard, choose file on sscard, now goto that rom I said to remember. click yes, should be good to go
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
the problem i am running into with this is that the screen won't turn on at all. like the OP said, i get a single vibrate and thats it, the screen doesn't turn on. if it did, would be an easy-peasy fix. but since the screen won't turn on, i seem to have run out of options. took it into best buy and they just told me the battery was dead. its been charging for a few hours but to no avail.

ive been trying to help 3 diff ppl wit this problem, if its just doing the vibrate its cuz ur just trying to pwr it on, thats NOT what were trying to do. its easy do exactly what I type
1, take batt out, put it back in
2, hold vol dwn, dont let go, now hold pwr dwn til a white screen comes up, takes a few seconds
3, now if this doesnt work, its b/cu have an slcd and u didnt install correct drivers b4 rooting, and I cant help u nemore after that
sent by Violent J's wicked 6300

[Q] problems trying to get rid of superuser

I am having troble unrooting an evo 4g. I got to the s-on part, but can't get the phone to recognize the PC36IMG.zip file. I've tried a couple of these ruu files, thinking that most of those might not be working properly. The ultimate goal, really, is to get rid of the superuser permissions. I am trying to sent the phone back to Sprint and am afraid that they might see it. I've tried downloading Terminal Emulator. However, everytime i put rm superuser.apk, the response i get is that it can not be done because it's a read-only file. any suggestions?

if the s lock is on you wont be able to get rid of it. How are you trying to get it to read the PC36IMG.zip because if you have it on the root of your sd card and restart into bootloader it will automatically read the zip and ask to flash it if not just do a clear storage and that should solve it

m.dangerfield01 said:
I am having troble unrooting an evo 4g. I got to the s-on part, but can't get the phone to recognize the PC36IMG.zip file. I've tried a couple of these ruu files, thinking that most of those might not be working properly. The ultimate goal, really, is to get rid of the superuser permissions. I am trying to sent the phone back to Sprint and am afraid that they might see it. I've tried downloading Terminal Emulator. However, everytime i put rm superuser.apk, the response i get is that it can not be done because it's a read-only file. any suggestions?
Click to expand...
Click to collapse
You need to run ruu now that you're S on. As was noted already, the PC36IMG must be on the main directoryof your SD card. Also, make sure the file isn't named PC36IMG.zip.zip. If you're using windows, then the file extension is hidden, and the .zip is already there, just hidden. Therefore, if you add a .zip, then its really there twice. So using windows, it should just look like PC36IMG. Once its named correctly, and on the main directory of your SD card, the bootloader should detect it and ask you to update.
Sent from my PC36100 using XDA App

Copy all of the data on your sdcard to your pc desktop and then reformat the card. Now place the RUU file on the root of the sdcard and if the phone doesnt recognize it in the bootloader menu, then it might mean your sdcard isnt "good" enough. I had the same problem with a class 2 card and i had to buy a whole new sdcard for it to work.

I've checked and made sure that the file name is right. When i put the phone in bootloader it doesn't recognize anything. nothing pop up to ask yes/ no.

Like I said, read my previous post. Format the card and try again. If it doesnt work, then try it with another sdcard.

Also, do you think it would be a problem to send in the phone with superuser on it still?
p.s. i tried to get it out after i re-rooted it and the s was off.
Thank you for the helps.

You can't send the phone in rooted period. Flash that unrevoked s-on utility again to get it back to s-on. Borrow somebodies sdcard and put the RUU file on it. Then flash the RUU in bootloader when the phone recognizes it. I STRONGLY believe that its your sdcard acting funny because it happened to me too.

knowledge561 said:
Like I said, read my previous post. Format the card and try again. If it doesnt work, then try it with another sdcard.
Click to expand...
Click to collapse
I agree. If the OP is sure the file is on the main directory of his card, and its named properly, yet it wont read it...then formatting the card would also be my recommendation.
Sent from my PC36100 using XDA App

Stuck on bootloader

When I try to go in ty o recovery, it just comes back to bootloader. Last thing I did was reboot after fix permissions. On cm7.0.2.
Is there a way out of this?
Im pretty new to rooting but is my first issue in about a month. Thanks in advance
Sent from my PC36100 using XDA Premium App

Reflash your recovery from the bootloader screen and I suggest you flash amon RA v2.3.
posting & replying via the XDA Premium app.

dougjamal said:
Reflash your recovery from the bootloader screen and I suggest you flash amon RA v2.3.
posting & replying via the XDA Premium app.
Click to expand...
Click to collapse
Thanks for responding. Everytime I choose recovery, it just brings me back to the white screen with hboot, bootloader, recovery, fast load, etc...
Is there something that I am not seeing? I tried downloading a rom on another SD card from a different EVO and then using that SD card to flash on my EVO...but still stuck on the the same white screen....

That is not what I meant. Go to the link below and download the PC36IMG.zip file for amon RA recovery v2.3 and place it on the root of your SD card (not in any folder).
http://forum.xda-developers.com/showthread.php?t=705026
Afterwards, shut down your device. Simultaneously press the DOWN volume button and the power button until your device starts. After a short pause, a few lines of text will scroll across the screen and then the bootloader *should* automatically detect the zip and prompt you to install it. Follow the prompts to install. Installation will take less than 10 seconds. Afterwards, reboot into your new recovery and then go to the wipe menu and wipe EVERYTHING in it EXCEPT your SD card. After that, flash the rom you want to use. Be patient during the initial boot after flashing the rom.
posting & replying via the XDA Premium app.

Posted in error!

I've never flashed anything from anywhere but the recovery so I'm a bit lost. I downloaded the ADB tools and now trying to figure out how to use them. I will try and put RA recovery through ADB....Thanks again for your help and I will let you know if I can figure out ADB.

illmatic11 said:
I've never flashed anything from anywhere but the recovery so I'm a bit lost. I downloaded the ADB tools and now trying to figure out how to use them. I will try and put RA recovery through ADB....Thanks again for your help and I will let you know if I can figure out ADB.
Click to expand...
Click to collapse
It doesn't get any easier than the instructions posted in my previous post. All you have to do is download the file from the link I posted and put the file on the root of your SD card. Then boot into the bootloader screen. The bootloader will basically do it for you. Anyway, I hope everything works out for you. If not, let us know and we will continue to try to assist. Take care.
posting & replying via the XDA Premium app.

Thanks...It sounds easy enough. The only thing I do not know how to do is put the file on the root of my SD card...Is that what ADB is for? Do I need to do anything special to install ADB? Sorry, just brand new to this.

Attach your device to your computer via USB, when your computer recognizes the device, you should see an additional disk drive showing in your computer's file explorer. If you have a Mac, a disk drive will appear on the desktop. Simply copy the file over to it. Do not put it in any folder. It is that simple, my friend.
posting & replying via the XDA Premium app.

Gotcha...My pc is not recognizing my EVO...nothing pops up when I plug in. I am downloading the drivers now...maybe that will fix it?

illmatic11 said:
Gotcha...My pc is not recognizing my EVO...nothing pops up when I plug in. I am downloading the drivers now...maybe that will fix it?
Click to expand...
Click to collapse
The hboot drivers from unrevoked should let the pc detect the evo.

Thank you for helping teh roxxorz. I really appreciate it. I'm in the middle of packing for my move back to Orlando before dawn in the morning and I would appreciate it if you could take over from here. I've been trying to assist the OP between breaks but now I need to finish up before forcing myself to get to bed early. Thanks again and take care.
posting & replying via the XDA Premium app.

dougjamal said:
Thank you for helping teh roxxorz. I really appreciate it. I'm in the middle of packing for my move back to Orlando before dawn in the morning and I would appreciate it if you could take over from here. I've been trying to assist the OP between breaks but now I need to finish up before forcing myself to get to bed early. Thanks again and take care.
posting & replying via the XDA Premium app.
Click to expand...
Click to collapse
-Tags you out-
Yea I can take over...also, have a safe move.

you could also take the sd card out of ur evo... and put it in a micro sd adapter and stick it right in ur computer, (thats if u have a card reader and a microsd adapter) but then u can put the file on the sd card that way, then stick it back in ur evo and bam, follow the instructions

Thanks again for your help...I'm a lot further than I was last night. I installed the htc drivers and still cannot see my SD card anywhere on my pc. I don't have a micro SD adapter.
Is there something I should download from unrevoked?

I downloaded and installed the unrevoked hboot drivers and still cannot see the SD card on my PC. I can hear it connect and disconnect but cannot access or even see it. Any ideas? Thanks for your help.

illmatic11 said:
I downloaded and installed the unrevoked hboot drivers and still cannot see the SD card on my PC. I can hear it connect and disconnect but cannot access or even see it. Any ideas? Thanks for your help.
Click to expand...
Click to collapse
Here, try this. > http://forum.xda-developers.com/showthread.php?t=695243

[Q] Help with Virtuous Unity

I've been trying to flash the Rom onto my phone, however every time I try It goes through all the install processes and says that is complete, but when I reboot the system it shows me the HTC Splash screen goes black shows me the splash screen again and then throws me back into Clockwork. I have cleared the cache and did a factory reset. So does anyone know what could be the problem?

I had the same problem... you actually need th DZ h-boot..
Im currently changin the boot but im having a problem with it.. ill let you know how it goes after im done with this problem.

I found something about the DZ H-Boot, but I have no Idea how to use ADK to get it on my phone, is there a guide that doesn't assume you know how to use it, or a way to do it without ADK?

www.virtuousrom.com
read it. follow directions.
to learn more about the SDK, check the wiki. there's a complete guide on how to install/set up your computer for ADB push.

I searched all over the wiki and can not find anything about setting up for a ADB Push.

just Google it or Bing it or duck it . there are guides all over the internet for different platforms .
Sent from my HTC Vision using XDA App

Tierehl said:
I found something about the DZ H-Boot, but I have no Idea how to use ADK to get it on my phone, is there a guide that doesn't assume you know how to use it, or a way to do it without ADK?
Click to expand...
Click to collapse
You don't necessarily need ADB to flash the DZ hboot to the G2 I tried this method and it worked flawlessly...
Credit to codemonkey10 for the step by step process..
You need the DZ H-Boot... the rom wont run or install unless you have it. here is how to install it on your phone (guessing its a g2) without having to use adb... (and here is the dz hboot download... http://files.virtuousrom.com/vision/misc/PC10IMG.zip)
Do a full nandroid backup before any of this, and you will need an sd card reader....
Download the h-boot and move it to the root of your sd card.
Turn the phone off and turn it back on by holding volume down and power.
You’ll be ask if you want to update, press volume up to proceed.
After your done you be asked press power to reboot, press it.
You should will see the white HTC screen, wait 5-10 seconds then pull battery.
Pull sd card out of phone, and place in a card reader.
Delete the PC10IMG file (dz hboot) and put the sd card back in the phone.
Then hold volume down and power to go to bootloader
Once in bootloader go to recovery
Do not wipe anything because the new h-boot wiped everything
In recovery go to install zip from sd card
Then, choose zip from sd card
Find the Virtuous Unity Rom in the sd card.
Choose it and wait for it to install
Once it is finished choose reboot now.
Sent from my HTC Vision using XDA Premium App

Thanks csuf, instead of using an Micro SD Reader (because I don't have one) I used my old Sidekick Slide, and it worked perfectly

Tierehl said:
Thanks, csuf instead of using an Micro SD Reader (because I don't have one) I used my old Sidekick Slide, and it worked perfectly
Click to expand...
Click to collapse
That's great to hear...glad I could help...
Sent from my HTC Vision using XDA Premium App

[Q] Stock Incredible in BootLoop

A friend was trying to transfer contacts or some nonsense from her incredible 2 to her old incredible and got a boot-loop.
The phone was totally stock.
Now I can get into the bootloader but no matter what i do from there: Bootloop.
can't get into safemode either.
I have only ever softbricked my One X after I had rooted and installed a custom recovery, so i am not sure what to do here.
Should i just RUU? If so can someone provide me with a link to a TUT or a DL. I don't even know what Version of the Stock ROM she had or anything.
(In case you can't tell i know virtually nothing about the incredible)
Cheers

ashayden said:
A friend was trying to transfer contacts or some nonsense from her incredible 2 to her old incredible and got a boot-loop.
The phone was totally stock.
Now I can get into the bootloader but no matter what i do from there: Bootloop.
can't get into safemode either.
I have only ever softbricked my One X after I had rooted and installed a custom recovery, so i am not sure what to do here.
Should i just RUU? If so can someone provide me with a link to a TUT or a DL. I don't even know what Version of the Stock ROM she had or anything.
(In case you can't tell i know virtually nothing about the incredible)
Cheers
Click to expand...
Click to collapse
Have you tried a factory reset from hboot? If so or if it dosent work try an ruu http://dinc.does-it.net/Stock_Images/4.06.605.3/PB31IMG.zip.

thnx
cmlusco said:
Have you tried a factory reset from hboot? If so or if it dosent work try an ruu http://dinc.does-it.net/Stock_Images/4.06.605.3/PB31IMG.zip.
Click to expand...
Click to collapse
Factory reset does nothing. I will try an RUU. Is this one completely stock?

also...
NOOB question-->
The only time i have ever RUUed (ha) it was an executable... this is a .zip
do i just uncompress it to find the .exe ???

ashayden said:
NOOB question-->
The only time i have ever RUUed (ha) it was an executable... this is a .zip
do i just uncompress it to find the .exe ???
Click to expand...
Click to collapse
place the .zip on the root of the SD card and make sure it is named "PB31IMG.zip" and the SD is formatted to FAT32 then boot into hboot and go to bootloader and it will scan for the file and when it finds it it will ask you if you want to flash it, you just need to click the vol. up button to update and then it will flash it and then you will need to click vol. up to reboot I believe. if the RUU was successful it should boot into stock HTC android without problem.

thanks but...
nschiwy said:
place the .zip on the root of the SD card and make sure it is named "PB31IMG.zip" and the SD is formatted to FAT32 then boot into hboot and go to bootloader and it will scan for the file and when it finds it it will ask you if you want to flash it, you just need to click the vol. up button to update and then it will flash it and then you will need to click vol. up to reboot I believe. if the RUU was successful it should boot into stock HTC android without problem.
Click to expand...
Click to collapse
but... i can only get into the bootloader... i tried putting the .zip on the external SD card and HBOOT couldn't find it.
is there a way to put the .zip on the internal???

ashayden said:
but... i can only get into the bootloader... i tried putting the .zip on the external SD card and HBOOT couldn't find it.
is there a way to put the .zip on the internal???
Click to expand...
Click to collapse
As far as I know there is no way to flash things using the internal memory. I could be wrong but this is what I suggest for you:
If hboot couldn't find it then you need to do two things:
1. Make sure your file is called PB31IMG.zip not PB31IMG.zip.zip
2. Format SD to FAT32 File System Format
a. Make a backup of files on SD
b. Format to FAT32 using windows explorer
c. return files to SD card
Also an important note is to check the MD5 sum of the file. The MD5 for the file you downloaded is:
25EC451E08CD98C9495971BCB37E6582
This is important because flashing bad files through hboot can permanently brick the phone.
If you have mini-adbinc on your computer you just need to navigate to the directory of mini-adbinc in Command Prompt and then use the command:
Code:
md5sums C:/Folder/Folder/Folder/PB31IMG.zip
(where Folder/Folder/Folder is the series of folders to the location of PB31IMG.zip)
If you don't have these resources on your computer then there are several MD5 checkers online that can do the work for you and have more of a graphical UI instead of command prompt.

ashayden said:
but... i can only get into the bootloader... i tried putting the .zip on the external SD card and HBOOT couldn't find it.
is there a way to put the .zip on the internal???
Click to expand...
Click to collapse
There is a way to put it on the internal drive, but hboot wont look for it there. Did you try backing up the sd to a pc, then format the card fat32, then put the ruu file on the sdcard in no folders. Make sure its named EXACTLY caps and all PB31IMG.zip, it shouldnt need to be renamed though. Boot to hboot, it should find it.

update fail!
so i formated to fat 32.
It recognized the image tired to flash but ultimately said...
Main Version is older!
Update Fail!

ashayden said:
so i formated to fat 32.
It recognized the image tired to flash but ultimately said...
Main Version is older!
Update Fail!
Click to expand...
Click to collapse
Try this one:
http://www.mediafire.com/?1ovb6959r9qyg6w
I am not actually sure that it is different than the one cmlusco gave you but it worked for someone else when I helped them so it can't hurt to try!

.zip??
nschiwy said:
Try this one:
http://www.mediafire.com/?1ovb6959r9qyg6w
I am not actually sure that it is different than the one cmlusco gave you but it worked for someone else when I helped them so it can't hurt to try!
Click to expand...
Click to collapse
Thanks, do i need to extract the files and put each of the .img files on there individually? Or, what do I do with the .zip?

Remember to extract the pb1img. It's inside the zip folder that was really confusing for me a couple years back
Sent from my ADR6300 using xda app-developers app