[Q] Can you paint the Body Glove case - Captivate Accessories

Is it possible to paint/color the case that came from ATT when I bought it I had 2 choices pink(yuck I am not a pink person) or black(acceptable but not preferred). If it is possible to paint it what kind of paint would you recomend?

scooterjes said:
Is it possible to paint/color the case that came from ATT when I bought it I had 2 choices pink(yuck I am not a pink person) or black(acceptable but not preferred). If it is possible to paint it what kind of paint would you recomend?
Click to expand...
Click to collapse
it is hard to say how long it will last but there are many paints out there for plastics krylon fusion cones to mind, you may even be able to use vinyl paint for car interiors.

I had thought of the Krylon plastic paints was just curious if anybody had actually done it yet and if they had what were the results.

I assume you're talking about the body glove mirage case? My guess is that it won't work that well, because the case is rubber(ish), therefore when you put the case on, the stretching would crack the paint. I also see the glossy stripes being a problem for adhesion. Might work if you could find some sort of rubberized paint, but good luck with that.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App

Related

Softtouch backcover replacements?

I find the phone to be quite slippy without any coverings. I don't really want to add a skin or jell case, they will make the phone too thick. I tried fully body screen protectors on my G1 but found they did not last on the body, the edges peeled after a few months on any curved surfaces.
I wondering if anyone made a softtouch back casing, that could replace the one (two) that came with the phone, just something with some grip so the phone does not slip out of your hands so easily...
Other options which could make it even better... it had a think layer of jell for a bit of impact protection... if the side edges extended to cover the metal band on the front, so that it could provide a little screen impact protection too. I maybe asking for a lot, sort of an all in one but it seems like a feasible product.
Everyone is waiting for new backcovers. Samsung will likely make them available, and surely the aftermarket, too. But none are out there, yet.
-bZj
I think it would be cool if they made some metal ones
this is number 1 on my list (rubberized backing)......phone is extremely slippery. number 2 would be anti-glare screen protector, and for 3 i would get a holster from Seidio
If you don't mind sacrificing one of the covers that came with the phone, you could spray it with Plasti-Dip...a readily available rubberized paint. Soft Feel paint from Alsa would probably be much better, but that stuff is only available commercially. If I try the Plasti-Dip, i'll post how it turns out.
jwb009 said:
If you don't mind sacrificing one of the covers that came with the phone, you could spray it with Plasti-Dip...a readily available rubberized paint. Soft Feel paint from Alsa would probably be much better, but that stuff is only available commercially. If I try the Plasti-Dip, i'll post how it turns out.
Click to expand...
Click to collapse
that might be worthwhile since I don't like the purple backcover anyway. Now if i can remember where i put it....
I don't know if you guys noticed but any crunching sound is coming from the battery cover and not the chrome trim. I noticed that on a demo model
I'd LOVE LOVE LOVE an aluminum cover, with plastic cutouts overe the antennas for celluar/WIFI/BT/GPS.
I'd settle for Matte too.
jwb009 said:
If you don't mind sacrificing one of the covers that came with the phone, you could spray it with Plasti-Dip...a readily available rubberized paint. Soft Feel paint from Alsa would probably be much better, but that stuff is only available commercially. If I try the Plasti-Dip, i'll post how it turns out.
Click to expand...
Click to collapse
i was thinking same thing - if you do it first, abrade (sand) the surface fairly rough so it gets a good bite to the surface - just a suggestion
Or just get some 3m di-noc vinyl carbon fiber film. Did it to my EVO back before taking it back. Looks great and has a texture to it. Got the idea from the EVO section here:
http://forum.xda-developers.com/showthread.php?t=703496
That looks pretty nice! The bump is probably hard to do though =/ and wish they had different colors
Sent from my Samsung Vibrant using XDA App
bought Plasti-dip and sand paper, trying it now....
and now i finally understand why Sammy included the 2nd ugly cover w/ Vibrant
disturkis4u said:
That looks pretty nice! The bump is probably hard to do though =/ and wish they had different colors
Sent from my Samsung Vibrant using XDA App
Click to expand...
Click to collapse
They do:
http://www.carbonfiberfilm.com/blog/3m-carbon-fiber-di-noc-now-available-in-7-different-colors/
Broken said:
They do:
http://www.carbonfiberfilm.com/blog/3m-carbon-fiber-di-noc-now-available-in-7-different-colors/
Click to expand...
Click to collapse
i want pink! lol
and for the plasti-dip.. please do post pics when u r done!
this plasti-dip stuff is very nice and looks like from factory. i put 3 coats already. cant comment on durability. ps. i light sanded the cover before just in case.
if this stuff hold well, i am planning on doing the same to my other cover.
Picture taken with Nexus
before doing the second one, you might try checking your signal strength (iirc #*#*4636*#*# ) to see if you're experiencing signal loss with the plasti-dip'd cover
if you don't see any signal loss, an idea for you on the 2nd one - take whatever amount of pasti-dip you'll think it will take, and mix in some media to give it some body or thickness as well as texture - maybe some short 1/4 - 1/2" fiberglass strands, ground up walnut media, ground glass or even sand) - just mix in and stir before painting it on
if you do go that route, might try a little bit first and paint onto something else (something plastic or metal that won't absorb any of the material like wood would) just to see what texture it gives you on the surface as well as what kind of build up it gives
kolyan said:
Picture taken with Nexus
Click to expand...
Click to collapse
Not bad! I might have to try that tomorrow. Hows the grip on it?
Sent from my Samsung Vibrant using XDA App
Looks good dude
Sent from my SGH-T959 using XDA App
disturkis4u said:
Not bad! I might have to try that tomorrow. Hows the grip on it?
Sent from my Samsung Vibrant using XDA App
Click to expand...
Click to collapse
I doubt rubber paint will effect signal. The grip and feel just like other rubberized things. Looks like from factory and was super easy to do. 3 coats with 20 minut intervals and 1 hour to dry, instructions say let dry for 4 hours. Sand with 600-800 sand paper. why 3 coats, well just in case....
ps any one know how to remove the chrome trim ? i wanna paint that too. when all this glossy plastics get oily, i hate the feeling it creates.
Kolyan,
looks great. thanks for trying this and posting pics.
What did you use to apply it? Did you paint or spray it on?

different battery cover for samsung vibrant?

Since the vibrant comes with two different battery covers, where are all the third party ones? Are battery covers, especially with the vibrant/galaxy s chin on the bottom, hard to make? I was hoping to get a nice rubbery one like how the battery cover of the garminfone has.
Not yet OP. But there might be in the future.
The phone was only released 20 some days ago. It takes a some time for third party accessories to get made, but with the popularity of the galaxy s phones I'm sure some will be made.
Sent from my SGH-T959 using XDA App
Put www in front since I can't post links seeing as how I'm mostly a reader of this forum.
karendeals.com/For-Samsung-Vibrant-FROST-Hard-Back/M/B0041MLRLO.htm?traffic_src=froogle&utm_medium=CSE&utm_source=froogle
it would be awesome if some one made metal/ aluminum back cover for vibrant. It might make the phone a little bit heavier.
tritran18518 said:
it would be awesome if some one made metal/ aluminum back cover for vibrant. It might make the phone a little bit heavier.
Click to expand...
Click to collapse
You have no idea how much I've been hoping for and searching for this exact thing. I would love a back such as this not only for a slightly heavier phone but it just feels less cheap and easy to break and feels more, I don't know, sturdy in the hand. Less slippery too than plastic.
Google is your friend!
Closest to metal back plate i have found is here...
It doesn't say if any of those backs are aluminum/metal. I assume they are all just the same plastic crap that comes with the phone -- if so, not interested!
I have that case from daydeal and the back is metal but doesn't add to much weight to it. And it scratches kinda easy so just be careful. But overall im happy with it.
Sent from my SGH-T959 using XDA App
shadrage said:
It doesn't say if any of those backs are aluminum/metal. I assume they are all just the same plastic crap that comes with the phone -- if so, not interested!
Click to expand...
Click to collapse
it says "1-piece hard plastic & aluminum cover with a stunning machined circular pattern."
I have that case from daydeal and the back is metal but doesn't add to much weight to it. And it scratches kinda easy so just be careful. But overall im happy with it.
Click to expand...
Click to collapse
is it a case or a back cover only?
It's somewhat a case, very similar to the casemate barely there case.
I also have the aluminum case. It's pretty nice, and I didn't see a drop in GPS reception with it - but my GPS is terrible regardless. I like the cae, even if it isn't a back-plate.
I swap my cases around, so I'm using a simple clear/argyle TPU cover over a white back-plate right now.
-bZj
Sent from my SGH-T959 using XDA App
Metal Cases
I have found two different cases available. One is all metal, the other is a mix of plastic and aluminum. Here are the links to eBay auctions.
All Metal Case
Aluminum and Plastic Case Available in Silver, Red, Black and Blue.
The Aluminum and Plastic case says I-9000, but also says it is for the Vibrant.
A simple eBay search of Vibrant Metal Case will pull up the same results I found.
jnp1974 said:
I have found two different cases available. One is all metal, the other is a mix of plastic and aluminum. Here are the links to eBay auctions.
All Metal Case
Aluminum and Plastic Case Available in Silver, Red, Black and Blue.
The Aluminum and Plastic case says I-9000, but also says it is for the Vibrant.
A simple eBay search of Vibrant Metal Case will pull up the same results I found.
Click to expand...
Click to collapse
Has anyone had these and can give feedback?
Sent from my SGH-T959 using XDA App

Hard case or Gel case?

Just curious if any of your guys are using any particular hard or gel cases for the MT4G that you are happy with so far? I need to get one for my wife's phone and want to see what the community is using thus far...
Im using one and it fits nice and tight. It came packaged with a screen protector and a microfiber cloth with the mytouch logo on it. I really like gel covers, it kinda absorbs drops. I had one on my cliqxt at it kept it looking brand new with no battle scars
Sent from my HTC Glacier using XDA App
I got the same one, problem I have with it is it picks up dust so easily. It goes from being a black gel case to grey. I did see one at T-Mobile I really liked, a thin grey gel skin with a hard white back that went over it.
i find hard cases to be more for logo's/styles... its hard to find a hard case thats actually tight and protective from all angels, most the time when its dropped it just pops right off... gel cases absorbs the shock but also doesn't pop off so prevents scratching... TPU cases are nomally not as "sticky" as gel cases where fibers from your pocket will stick to them... all in all its personal preference
kitsunisan said:
I got the same one, problem I have with it is it picks up dust so easily. It goes from being a black gel case to grey. I did see one at T-Mobile I really liked, a thin grey gel skin with a hard white back that went over it.
Click to expand...
Click to collapse
http://www.dropbox.com/gallery/6408333/2/mt4g/Wplastic-Grubber?h=ad75a1
Yup I love mine.
NexVision said:
http://www.dropbox.com/gallery/6408333/2/mt4g/Wplastic-Grubber?h=ad75a1
Yup I love mine.
Click to expand...
Click to collapse
This is the one I use and I LOVE IT! Soft on the inside, hard on the outside! Slides EASILY in and out of case/pocket and NO LINT/DIRT collection on it like with bare GEL covers.... Pricey at $30 but worth it!
That case does look sick on the phone (thanks for the pic's) but does it make the phone thick? I usually end up taking my case off just because I prefer thin phones... I would imagine this would be like using 2 cases hence doubling the thickness?
The gel case is very thin, doesn't add a whole lot of bulk to it. It winds up being about as thick as a standard case.
pack said:
That case does look sick on the phone (thanks for the pic's) but does it make the phone thick? I usually end up taking my case off just because I prefer thin phones... I would imagine this would be like using 2 cases hence doubling the thickness?
Click to expand...
Click to collapse
Very thin much better then the gelskin and sits almost flush with the screen so its real easy to type on the edges.
surfnhawaii808 said:
This is the one I use and I LOVE IT! Soft on the inside, hard on the outside! Slides EASILY in and out of case/pocket and NO LINT/DIRT collection on it like with bare GEL covers.... Pricey at $30 but worth it!
Click to expand...
Click to collapse
Do they have this in black? Exactly what I'm looking for.
Sent from my HTC Glacier using XDA App
no, all i saw was white/grey and lavender/lilac...
eww
i want black/grey or maybe some blue or green colors
edit:
thats what was at one of the stores in my area, will poke around town and see what else i find
ESKIMOn00b said:
no, all i saw was white/grey and lavender/lilac...
eww
i want black/grey or maybe some blue or green colors
edit:
thats what was at one of the stores in my area, will poke around town and see what else i find
Click to expand...
Click to collapse
who sells the cases? and where i can i buy one
NexVision said:
http://www.dropbox.com/gallery/6408333/2/mt4g/Wplastic-Grubber?h=ad75a1
Yup I love mine.
Click to expand...
Click to collapse
That's the one I have. Actually, that particular case is what decided for me whether to get the Black/Red model or the White one (which I chose).
Had they had this exact setup in Black/Red, I would have gone that way. But as it stands, I really like it. Plus, it has the "MyTouch" logo on the back, which adds to it's "Not-from-some-mall-kiosk" appearance.
T-mo stores...
my only gripe is how hard the case is to get on properly, which would be no problem exept you cant dock it with it on...
If they had the grey/black combo I'd have bitten the bullet and gotten it. Of course, vinyl dye would work pretty well, as long as you give it a few days to cure.
ESKIMOn00b said:
T-mo stores...
my only gripe is how hard the case is to get on properly, which would be no problem exept you cant dock it with it on...
Click to expand...
Click to collapse
You got the case from TMO store?
jjlean said:
You got the case from TMO store?
Click to expand...
Click to collapse
Yup got mine at a T-mo Store too and love it...I have the Case-Mate Tough Case on my Nexus and this is hands down way thinner and sexier!
Went to the tmo store yesterday and looked at the cases. Every single one of them covers the dock buttons, so if you're planning on docking it, you'll have to take it out of its case, dock it, put it back in etc...etc... What a pain. If they make a car dock, that's going to be even worse.
I can just see my typical day... wake up, take out of dock, slip into case, get to car, slip out of case, on to car dock, get to work, get out of car dock, slip into case, get to desk, slip out of case, put into desk dock, go to lunch, slip into case, etc... OMG!
The only one I saw that wouldn't be too bad is the plastic holster that just cradles the front and leaves the back open.
thats what i wound up with for the exact same reason!... that plus a phantom skin when they drop will probably be what covers mine
Wow i really like that case.... is it anywhere online? I just freakin spent 20 bucks online on a gray rubber/clear plastic bodyglove on ebay... It should come any day now I just hope it doesnt clash with my red phone lol but yeah.... Is that case available online or only at tmobile?
Sent from my HTC Glacier using XDA App

Pouch that will accommodate Rock Quicksand case?

Hi guys,
Just wondering if any of you using a Rock Quicksand case with your S3 have found a leather pouch that the duo will fit in?
I was thinking of buying the official case and hoping it will stretch, but any advice would be much appreciated.
Cheers
Chris
ChrisH87 said:
Hi guys,
Just wondering if any of you using a Rock Quicksand case with your S3 have found a leather pouch that the duo will fit in?
I was thinking of buying the official case and hoping it will stretch, but any advice would be much appreciated.
Cheers
Chris
Click to expand...
Click to collapse
I bought one of these to try > http://www.amazon.co.uk/gp/product/B007X2IOQA/ref=oh_details_o00_s00_i00
Simply because the reviewer said it was loose, it is. Probably enough to get the phone+Rock on with a bit of work. Accepts mine no problem with a flip cover, which has a wider case back and the front flap. Not bad quality either.
Thanks for the reply! In the end, I took a chance and ordered the genuine Samsung Galaxy Note pouch which fits the combo perfectly.
Absolutely delighted.
Chris
ChrisH87 said:
Thanks for the reply! In the end, I took a chance and ordered the genuine Samsung Galaxy Note pouch which fits the combo perfectly.
Absolutely delighted.
Chris
Click to expand...
Click to collapse
I did the same lol, did you go for the white one?
Sent from my GT-I9300 using xda premium
I went for the blue pouch. Wasn't sure if the white would stay that colour over time!
Sent from my GT-I9300 using Tapatalk 2
ChrisH87 said:
I went for the blue pouch. Wasn't sure if the white would stay that colour over time!
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
You guys mind taking some shots of the S3 in note's pouch? I wanna see how snugly it fits into the pouch, and how easy it will be to take out.
I'm using the rock quicksand as well and I have been looking for comfort fit neoprene pouch, nothing skin tight.
Thanks!
Here you go!
The phone fits firmly in the note case but is also extremely easy to remove - if you squeeze the edges of the pouch together, the phone slips out freely.
Couldn't ask for more!
Chris
ChrisH87 said:
Here you go!
The phone fits firmly in the note case but is also extremely easy to remove - if you squeeze the edges of the pouch together, the phone slips out freely.
Couldn't ask for more!
Chris
Click to expand...
Click to collapse
Nice! but it looks like it's made of leather (or faux leather). what's the inside like? same material? suede? I'm just paranoid of how it may scratch my screen. hence I've been looking for neoprene materials all these while. my nillkin protector is dry application hence doesn't cover everything. you reckon it'll be safe from scratches?
Looks like they don't have it locally though. Gonna need to order online....
redder95 said:
Nice! but it looks like it's made of leather (or faux leather). what's the inside like? same material? suede? I'm just paranoid of how it may scratch my screen. hence I've been looking for neoprene materials all these while. my nillkin protector is dry application hence doesn't cover everything. you reckon it'll be safe from scratches?
Looks like they don't have it locally though. Gonna need to order online....
Click to expand...
Click to collapse
The inside is a suede type material so shouldn't scratch the phone.
Chris
redder95 said:
Nice! but it looks like it's made of leather (or faux leather). what's the inside like? same material? suede? I'm just paranoid of how it may scratch my screen. hence I've been looking for neoprene materials all these while. my nillkin protector is dry application hence doesn't cover everything. you reckon it'll be safe from scratches?
Looks like they don't have it locally though. Gonna need to order online....
Click to expand...
Click to collapse
Youre worried about the 2 millimeter space around the screen protector that is of no actual use anyway? (which is also made of gorilla glass 2 and I have to assume it can withstand some soft suede)
Does the speaker hole line up?
futaris said:
Does the speaker hole line up?
Click to expand...
Click to collapse
No it doesn't, but isn't a problem volume wise.
Sent from my GT-I9300 using Tapatalk 2
i dont have a rock case, or a s3 in my possession yet, but i bought one of these.
i plan to not buy a case, and use this exclusively.
http://wrappers.typepad.com/ipod/2011/12/samsung-galaxy-s3-alcantara-sleeve-1900-plus-350-pp.html
I think I'm going to get the Krussell Luna 4XL pouch. I already have a KaysCase and I think the 3XL pouch would fit my phone only but with the case on it I think the 4XL would be a better fit.
http://www.amazon.com/Krusell-Premium-Leather-Samsung-SmartPhones/dp/B006VAMZLA/ref=sr_1_1?s=wireless&ie=UTF8&qid=1341019454&sr=1-1&keywords=krusell+luna+4xl
Hi,
any experience with the Luna 4XL yet? Got a Quicksand merely out of curiosity and I am so much impressed of the haptics it adds, don't want to return it. Still, more important to me is a pouch that protects the phone, especially the screen when it's in my pocket, laptop case, backpack, etc.
I hab pretty good experiences, case-wise with the Noreve on my HD2, but the S3 with the Quicksand so far did not fit into any of the pouches I tried. Placed an order for the Krusell, even though the Quicksand is thicker than the specs for the Luna are (10.8 vs 10 mm). We'll see how it fits...
Solemn

[Q] Leather care for the G4

So I was thinking about applying some mink oil on my brown leather G4. Anybody has better ideas on how to take care of the leather back?
I read the leather treatment is a 14 week process similar to Louie V. Bags and leather is same quality so I'm sure you would take care of it similar to those items i mentioned.
I just sprayed some nanosealant/leather care spray over the back. Should be fine, if not then on to the proper leather care products that I use for my jackets and boots.
forzanetti said:
So I was thinking about applying some mink oil on my brown leather G4. Anybody has better ideas on how to take care of the leather back?
Click to expand...
Click to collapse
I use a case
I'll probably use either coconut oil or the same stuff I use on my jacket and boots.
Yea, I have some leather balm for my car seats. Might give it a try on the phone.
Just let it get that natural rugged wear and tear
That's how I treat my boots and leather jackets
Here is the link to the LG site and the care of the leather. It does not tell you much on how to care for it. Just thought I would share it.
http://www.lg.com/us/support/product-help/CT10000003-CT10000027-1433215391097
tried to moisten up the leather using some extra virgin olive oil but cololite leather balsam for smooth leather did a better job. my leather back now shines! LOL
Would it be good idea to use the armorall leather wipes on the leather back of the g4
Sent from my LG-H811 using XDA Free mobile app
Also, similar post here, if it helps anyone.

Categories

Resources