Related
I am trying to flash epic back to stock rom, but when i run odin and plug in the phone in download mode it keeps on saying it's been added and then removed repeatedly. Any help?
Windows says this?
You put the phone in download mode, start Odin and then connect the phone to the PC.
I'd check to be sure you're using the usb cable that came with your epic. Using others can have mixed results, even though they fit.
Check the connection to the phone; be sure nothing is in the connector.
Try a different usb on your PC.
Can always try to reboot the PC as well.
Good luck
Now it works, but when i select the 528 pit, it's stuck on Setup Connection, but if i use the 512 pit it just says it failed.
Going to second the try a different usb port, although if you have any other micro-usb cords that have thicker cables than the samsung one, use that for flashing.
Also may want to reset computer after you have it fail. It seems to mess with something in windows or leave a process open that keeps it from working right
Also gonna ask a dumb question, you do have a stock epic rom that you're trying to flash along with the pit and you are clicking repartition in odin right?
Sent from my SPH-D700 using XDA App
I was on the DK28 rom before but now since 2.2 has been released officially i want to flash to stock and then get the official version. The problem is everytime i run it, it's on the SetupConnection part but it never gets past that. no i didnt repartition it.
The only suggestion I can offer other then the usual stuff (check connections, USB ports, drivers, etc) is to redownload everything. It's possible that the download could have been corrupted for whatever reason. It's happened to me once when I was trying to Odin back to stock.
Hope this helps.
So now i got it to run, but the phone it self booted into a green screen, and in the list in Odin it's stuck on modem
cant get into DL mode to Odin back to stock EC05
but i was trying to flash the new ee03 modem and put the .tar file in PDA instead of PHONE by accident and it said it was a success but when mi phone went to reboot it never did now it wont turn on and i get no leds or anything when charging ...any help pleasseeee
bradbutter said:
cant get into DL mode to Odin back to stock EC05
but i was trying to flash the new ee03 modem and put the .tar file in PDA instead of PHONE by accident and it said it was a success but when mi phone went to reboot it never did now it wont turn on and i get no leds or anything when charging ...any help pleasseeee
Click to expand...
Click to collapse
First things first you are supposed to put the modem in the PDA slot, in fact i have seen K0nane say it really doesn't even matter with the modem.
1. Did your battery have some charge left before it died?
2. Have you tried using odin without the battery in?
Try this:
Disconnect USB Cable (if Connected)
Remove Battery
Reconnect USB Cable
Hold 1
Press power
If this doesn't work, then you're probably looking at a hardware replacement.
dtm_stretch said:
First things first you are supposed to put the modem in the PDA slot, in fact i have seen K0nane say it really doesn't even matter with the modem.
1. Did your battery have some charge left before it died?
2. Have you tried using odin without the battery in?
Click to expand...
Click to collapse
*edit *
i had tried but for some reason it worked now ..maybe its alive and knows im on the forum and wants to make me look like an idiot ..but the method of using Odin without the battery in is working now....results in a few mins
potatoboyjs said:
Try this:
Disconnect USB Cable (if Connected)
Remove Battery
Reconnect USB Cable
Hold 1
Press power
If this doesn't work, then you're probably looking at a hardware replacement.
Click to expand...
Click to collapse
i had tried but for some reason it just worked...idk lol
but i want to use the new ee03 rom but i have to flash this modem again ..going to re download modem and try to flash it with my fingers crossed that it doesnt brick again
I have had my Epic for few months now, and have yet to encounter this error. Today both my parents decided to buy the Epic's (woot 3 epics in the house), and so I go and try to Root it for them. I go to the first one, and put CWM 3.1.0.1 on it. Everything goes fine, I reboot into CWM, everything dandy, shutdown and go into download mode (Hold 1 then press power button), done this many times. But here came the problem. Odin has failed during the flash and now the phone shows (Phone ---- ! ---- Computer) display when I try to boot it up or try to go into CWM. So I have tried Odin again with download mode, I did get the yellow download screen, but Odin keeps failing. I have tried different USB ports/cables. Different pit files and modems, including EB13, EC05 and EH06. And I am sure the files work, as I have just tried the second phone, and everything went fine. ... So yeah... uh... Attached are two screenies.
This is my Odin Print out
And this is the screen I get
NVM, got it to work using this :
kennyglass123 said:
There is still hope. Take out the battery and hold the power button for 30 seconds. Leave the battery out and plug the USB into the computer and then hold the "1" key on the keyboard and then press and hold the power button. It should get you back into download mode.
Click to expand...
Click to collapse
Glad you got it fixed!
(And that you searched, albeit after posting XD)
Posted by Mr. Z's Epic 4G.
Thank you for that post. Kids loaded some stuff on my notebook and it froze during Odin. Just happened to happen on this thread and Viola. Download mode accessed, Odin fixing.
I was about to go to Sprint today.
I love XDA.
Sent from my SPH-D700 using XDA Premium App
Hey that was my quote...YAY!
Glad you got it fixed dude!
Well, the true fix for me is the Battery is bad somehow... I can Odin like nothing if I take the battery out, but the second the battery is in and I try to Odin, it Fails... is this the case for you guys?
shiroimin said:
Well, the true fix for me is the Battery is bad somehow... I can Odin like nothing if I take the battery out, but the second the battery is in and I try to Odin, it Fails... is this the case for you guys?
Click to expand...
Click to collapse
I think that is caused by whether your computer has a powered or non-powered USB port.
no, because I have Odined 2 other Epics on the exactly same cable and same USB port, so it has nothing to do with that. It was truly just the battery.
shiroimin said:
no, because I have Odined 2 other Epics on the exactly same cable and same USB port, so it has nothing to do with that. It was truly just the battery.
Click to expand...
Click to collapse
Did you try swapping the battery from the other Epic and see if it truly is interfering somehow?
Hi everyone, this is my first post, and I'm completely baffled and think I may have bricked my phone. Here is exactly what happened.
I've been running syndicate rom with vision kernel on my samsung epic 4g on sprint for a very long time. I've been getting the upgrade notification for months, so I finally decided it was time to upgrade. Unfortunately, the way I decided to upgrade was to go back to stock, and then let it naturally upgrade. I followed the instructions at:
http://forum.xda-developers.com/showthread.php?t=1052813
and, the first time I tried to odin, it was stuck at "setup connection", so after waiting a very long time, I unplugged, then re-started odin. because I used the instructions at the above link, I had re-partition, auto-reboot, and reset time checked. This time, odin was able to get past "setup connection", and was stuck on "datafs.rfs" in odin, and on the phone, it no longer showed a downloading logo and looked like it was just off. I unplugged again, and this time, I could not easily get the phone into download mode. I tried a few things with the battery in, with it out, and finally, somehow, got it into download mode again. Trying odin 1.61, I tried again, it got stuck on datafs.rfs again, and after waiting a very long time, I unplugged again.
Now, I believe my phone is bricked. The following is true of my phone right now:
it does not turn on
it does not have any lights when plugged in
if plugged in, it will not go into download mode
if on battery, i can take out the battery, then put it back in, then i can go into download mode, but when in this mode, windows reports an unrecognized usb device. if the battery is in from when it was plugged in, it will not go into download mode. the battery must be popped out and then put back in to go into download mode.
terrible timing too, as my wife is expecting, and she'll most likely need to get in touch with me in the next week or two. If anyone can help me get my phone working again, that would be amazing. Thanks in advance for your help.
dmachine2 said:
Hi everyone, this is my first post, and I'm completely baffled and think I may have bricked my phone. Here is exactly what happened.
I've been running syndicate rom with vision kernel on my samsung epic 4g on sprint for a very long time. I've been getting the upgrade notification for months, so I finally decided it was time to upgrade. Unfortunately, the way I decided to upgrade was to go back to stock, and then let it naturally upgrade. I followed the instructions at:
http://forum.xda-developers.com/showthread.php?t=1052813
and, the first time I tried to odin, it was stuck at "setup connection", so after waiting a very long time, I unplugged, then re-started odin. because I used the instructions at the above link, I had re-partition, auto-reboot, and reset time checked. This time, odin was able to get past "setup connection", and was stuck on "datafs.rfs" in odin, and on the phone, it no longer showed a downloading logo and looked like it was just off. I unplugged again, and this time, I could not easily get the phone into download mode. I tried a few things with the battery in, with it out, and finally, somehow, got it into download mode again. Trying odin 1.61, I tried again, it got stuck on datafs.rfs again, and after waiting a very long time, I unplugged again.
Now, I believe my phone is bricked. The following is true of my phone right now:
it does not turn on
it does not have any lights when plugged in
if plugged in, it will not go into download mode
if on battery, i can take out the battery, then put it back in, then i can go into download mode, but when in this mode, windows reports an unrecognized usb device. if the battery is in from when it was plugged in, it will not go into download mode. the battery must be popped out and then put back in to go into download mode.
terrible timing too, as my wife is expecting, and she'll most likely need to get in touch with me in the next week or two. If anyone can help me get my phone working again, that would be amazing. Thanks in advance for your help.
Click to expand...
Click to collapse
Windows not recognizing a device means you don't have the proper drivers installed. I'd link them to you but I'm at work on my phone. Search google for samsung epic drivers. Or i believe you can even get them from samsung's website.
And Congratulations on the new baby.
Sent from a CM9 powered Epic.
the link you posted has all the best instructions. Do not skip a step or circumvent any. Use the file links he has provided. And use Odin 1.85.
Take the battery out of your phone let it sit for at least 20 minutes, leave the battery out plug it into computer and attempt to get it into download mode.
Very important your not using the Samsung stock charging cable to do this. You need a good USB cable, one like the Blackberry phones come with, which is designed for heavy data transfer
Good luck.
Sent from my MTD Epic 4G SGS using Tapatalk
The problem and the cause of your woes is a faulty cable. Get a heavy duty blackberry cable and try again. This time leave the battery out, using the cord as power put it into download mode with Odin already up on the computer and make sure to use the same port that it has been working in.
kennyglass123 said:
The problem and the cause of your woes is a faulty cable. Get a heavy duty blackberry cable and try again. This time leave the battery out, using the cord as power put it into download mode with Odin already up on the computer and make sure to use the same port that it has been working in.
Click to expand...
Click to collapse
Hey I said the same exact thing....:thumbup:
Sent from my MTD Epic 4G SGS using Tapatalk
edfunkycold said:
Hey I said the same exact thing....:thumbup:
Sent from my MTD Epic 4G SGS using Tapatalk
Click to expand...
Click to collapse
I know...saw it after I posted...lol. Plus you included the best link..nice!
Sent from my SPH-D700 using xda premium
I actually tried a differnt cable because of the original link the first time, and that didn't work at all (used my wife's evo shift cable). But, I did find yet another micro usb cable in the house, and that one does seem to be working. Although, the odin flash does not seem to be, seems to be hanging (and the phone shows just blue across the entire screen), but that is progress =) Thanks for the tips everyone. I'll post my findings if I am successful in un-bricking. (or post where i get stuck next =P) Thanks again everyone.
When you get stuck again, Odin with the battery and sd card out.
Already took the SD card out. I can't go into download mode with just the cable though (already tried). Any recommendations? To get into download mode currently, I have to:
unplug everything
take out the battery
pop the battery back in
then, 1+power to download mode.
dmachine2 said:
Already took the SD card out. I can't go into download mode with just the cable though (already tried). Any recommendations? To get into download mode currently, I have to:
unplug everything
take out the battery
pop the battery back in
then, 1+power to download mode.
Click to expand...
Click to collapse
Sounds like either the cable still has issues or the USB port is not properly powered. If a desktop, use the USB ports in the rear right on the motherboard. I see you have had different results from different cables already, if you can just get ahold of a heavy duty Blackberry or Palm Pre cable.
How long should I wait before re-trying a new flash? It's been stuck on cache.rfs for the past 2 or 3 hours. I'll try the back usb port instead of front usb ports. I'll also try a palm cable, I think I have one lying around somewhere. Thanks for the tips.
dmachine2 said:
How long should I wait before re-trying a new flash? It's been stuck on cache.rfs for the past 2 or 3 hours. I'll try the back usb port instead of front usb ports. I'll also try a palm cable, I think I have one lying around somewhere. Thanks for the tips.
Click to expand...
Click to collapse
Yeah, it is time to try again with those tips. 15 minutes is max.
SUCCESS!!
Following the original link, what I had to do was:
I plugged into rear usb
still wouldn't go into download mode, so unplugged, popped in battery, went into download mode, plugged in
started odin 1.61 (as in the trouble shooting part of the original link)
Used EC05 rom (as in the trouble shooting part of the original link)
my phone is back from the dead! Thanks for the help everyone.
Congrats man!
nice!
+10 char
Just got back here and I also am glad you got it going. Congrats! These Epics are almost unbrickable...
Sent from my MTD Epic 4G SGS using Tapatalk
I can get into download mode, but odin doesn't recognize, the only other screen i get too sdays "Firmware upgrade encountered an issue. Please select recovery mode in kies and try again, but Kies cant connect to it, am i screwed? Please help this all happened from changing my screen density, i cant find anyway too restore, i'm not a noob and am in desperate help, i'm gonna be soo bummed if i brick, but i have a feeling if i can get too download mode, there must be a way too restore it.
BbbYou say no recovery, but you should have at least stock recovery I think. Try holding volume up and power, is you can get in, restore to stock from there.
If doesn't work I would start by reinstalling the drivers or try a different computer.
You'll be fine.
Also you should state you rom, what you did before, rooted, etc
Sent from my SPH-D710 using Tapatalk
I flashed the newest version of Roman BB's AOKP CM9 Kang and tried to change the density, i went too restore my nandroid and it froze before it finished, I tried odin and the first 2 times it recognized but both froze before the end. im kinda couch surfing so now i'm incredibally screwed without a phone, please help.
badname said:
BbbYou say no recovery, but you should have at least stock recovery I think. Try holding volume up and power, is you can get in, restore to stock from there.
If doesn't work I would start by reinstalling the drivers or try a different computer.
You'll be fine.
Also you should state you rom, what you did before, rooted, etc
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
Roman bb's most updated AOKP, i changed the screen density and when i went to reboot it bootlooped, so i tried restoring a nandroid wich failed, tryed again, and now i cant get too recovery, i can only get too download mode, so i tried using odin too go back too stock, it failed almost at the end, twice, now i cant get odin to recognize my phone and it wont turn on, the only thing i can do is get too download mode, and too the thing saying use kies recovery, which does nothing because it won't connect. I'm at a total lost, i'm so scared i lost my only source of income, at this point in my life, if i dont have a phone, i dont have work or food or a warm place too sleep. Please anyone with any ideas please help.
I hate to be the one to tell you this but you're probably bricked. The giveaway is if you have problems in Odin at data.img:
http://forum.xda-developers.com/showthread.php?t=1504808
Will recommend that if you have further questions to post in that thread.
When going from ICS to anything else you should use ODIN to go back to stock. Anything else and you're risking a brick. More here:
http://forum.xda-developers.com/showthread.php?t=1525495
Hope this helps.
One quick question - which phone are you using and which usb cable for odin?
Be sure that using the original usb cable during odin.
kobridge said:
One quick question - which phone are you using and which usb cable for odin?
Be sure that using the original usb cable during odin.
Click to expand...
Click to collapse
I've never heard that one before. What do you think is unique about the stock micro-usb cable?
micro usb cable is not unique. There's standard size of micro usb and pin numbers, etc. But based on the product, it's not fit well each other.
One example is old LG micro usb cable is not going well with Samsung phones.
Of course, I tried this by myself and it always fails. But original micro usb cable which comes together with phone, it never failed.
garwynn said:
I hate to be the one to tell you this but you're probably bricked. The giveaway is if you have problems in Odin at data.img:
http://forum.xda-developers.com/showthread.php?t=1504808
Will recommend that if you have further questions to post in that thread.
When going from ICS to anything else you should use ODIN to go back to stock. Anything else and you're risking a brick. More here:
http://forum.xda-developers.com/showthread.php?t=1525495
Hope this helps.
Click to expand...
Click to collapse
i didnt go from ics to anything else, i changed the screen density, and it seems no one in those threads can get into download mode, i just cant get my odin to recognize my phone.
simple
TimidRat said:
i didnt go from ics to anything else, i changed the screen density, and it seems no one in those threads can get into download mode, i just cant get my odin to recognize my phone.
Click to expand...
Click to collapse
use a different cable and uninstall drivers and reinstall reboot computer also
kobridge said:
micro usb cable is not unique. There's standard size of micro usb and pin numbers, etc. But based on the product, it's not fit well each other.
One example is old LG micro usb cable is not going well with Samsung phones.
Of course, I tried this by myself and it always fails. But original micro usb cable which comes together with phone, it never failed.
Click to expand...
Click to collapse
Yeah now that you mention it I realized my nook color micro usb cable has a longer metal end-piece than my E4GT, and won't connect properly. I thought the length of the metal prong would have also been standardized. Go figure.
TimidRat said:
I flashed CM9. i went too restore my nandroid.
Click to expand...
Click to collapse
This is the problem unless you flashed a gb kernel/recovery first. You should not do anything in ICS recovery.
kobridge said:
micro usb cable is not unique. There's standard size of micro usb and pin numbers, etc. But based on the product, it's not fit well each other.
One example is old LG micro usb cable is not going well with Samsung phones.
Of course, I tried this by myself and it always fails. But original micro usb cable which comes together with phone, it never failed.
Click to expand...
Click to collapse
Its true not all cables are the same, but the funny part is from the beginning of OG Epic days we figured out quick the only thing you should do with the stock cable is charge... its garbage. Maybe the new model is better, havent tried it, but it looked pretty much the same, thin little thing... I use my 4 year old BBerry cable, about as thick as a cat-5... never had an issue. But yeah, try new drivers, cable, diff PC, use a USB that is physically part of the Motherboard of the PC (desktop)... all these things help with the shoddy drivers, etc... you may get lucky...
TimidRat said:
i didnt go from ics to anything else, i changed the screen density, and it seems no one in those threads can get into download mode, i just cant get my odin to recognize my phone.
Click to expand...
Click to collapse
But you said you did attempt a restore through CWM after the bootloop, correct? If you did and you're having problems you *may* have bricked. Using ODIN is a surefire way to confirm whether you did or not. If you didn't attempt anything through CWM while having CM9 installed then you may not be bricked but are obviously still having issues. As it has been said before - and quite often - CWM at your own risk; ODIN is believed to be the safest option.
Regardless, if you're having problems and the USB cable doesn't fix it I'll still recommend trying to get back to a GB stock ROM by ODIN. At the worst you've lost what you have done since the last backup, since you can restore that from the backup once you get back to GB. With so many bricked phones lately it may be best to err on the side of caution this time...
I've tried everything mentioned, except a different pc, i tried linux, on my pc odin doesntr recognize my phone, , but i just went and plugged a flash fdrive in so now im thinking my computer is having usb problems, so im gonna try another computer, i also made a usb jig to reset the odin counter too take it too sprint but it didnt work... i'm so confused and screwed without my phone. Thank you everyone for trying too help. Any more ides are greatly appreciated! Thanks soo much guys!
ive had this problem before and basically my phone would turn on but no signal sd card didnt work wouldent read in computer but if you cant get it to work and have fifty bucks u can go to mobiletechvideos.com and it will take about mabe 3-4 days mine took a week since i sent on a friday but it costs fifty bucks and the only thing when i came back that wasnt working 100% was the picture gallery. true him if it comes down to it
Well, since you're getting the firmware upgrade error, I'm gonna bet your phone is bricked. That happened to me, I finally took it to the Spring repair center and they couldn't fix it, so they swapped my phone out.
Sent from my Zack Morris brick phone
blackroseMD1 said:
Well, since you're getting the firmware upgrade error, I'm gonna bet your phone is bricked. That happened to me, I finally took it to the Spring repair center and they couldn't fix it, so they swapped my phone out.
Sent from my Zack Morris brick phone
Click to expand...
Click to collapse
Yup that's what theyre doing for me, i'll get it tomorrow or tuesday, cant complain too much im gonna get one with no scratches.
Thank you everyone who replied, im set egtting my new one, im gonna try and swindle kepping the bricked one cause im sure it could be of major use too a dev....
Sprint Epic 4G Touch Appears Bricked
My Sprint Samsung Galaxy S II Epic 4G Touch will no longer connect to my computer (also tried another computer and different usb cable), after a failed attempt to upgrade to ICS 4.0. The phone will not load up now to 'normal' operating mode.
It will only come up to the message:
"Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." I can no longer get into Recovery or Download modes. At least none that work. (See below)
I also built and tried the USB jig solution, which does power on the phone, but it then comes up and says:
FACTORY MODE
PRODUCT NAME" GT-19100
CUSTOM BINARY DOWNLOAD: YES (2 counts)
CURRENT BINARY: SAMSUNG OFFICIAL
Downloading...
Do not turn off target!!
But connecting to my PC still fails. Any ideas?