Related
Has anyone been able to set up Gizmo VOIP on AT&T's 3G? I have tried everything and cannot get it to connect. Gizmo and VoipStunet works fine on WiFi; also, VoipStunt CONNECTS on 3G but doesn't work properly. Is AT&T blocking Gizmo and if so is there any way around it? I've considered Fring but the lack of DTMF support renders it useless with Grand Central... and the Gizmo5 Midlet seems like a dirty attempt to play into the hands of the service providers (i.e.- AT&T)...
Any advice??
[EDIT] BTW-using Schap's 4.3
Sounds crazy, I know you've already tried it, but....
Proxy is off if using wap.cingular?
ISP setup is isp.cingluar to get a real ip (not 10.whatever...)
Ive used the wap.cingular for everything but that and have had no problems
(slingbox, orb, etc.)
I only use wap.cingular. With no prxy obviously.
I, too, have been able to use everything else with no problem.... but cannot figure this one out...
What softphone do you use? Here is some softphone to try, I test them all on my hermes. They are all working.
lax2tlv said:
Has anyone been able to set up Gizmo VOIP on AT&T's 3G? I have tried everything and cannot get it to connect. Gizmo and VoipStunet works fine on WiFi; also, VoipStunt CONNECTS on 3G but doesn't work properly. Is AT&T blocking Gizmo and if so is there any way around it? ... Any advice??...
Click to expand...
Click to collapse
Exactly what symptoms / behavior occurs when you try to dial VOIP over AT&T's data connection? Does it connect? What's the error message? Can you NOT send / receive audio?
This seems like a common issue. So far I haven't found anything decisive in the forums to indicate anyone is successfully using VOIP with AT&T's data network (Edge or 3G) on the Hermes. That is, when using the integrated phone dialer.
Even when the same VOIP configuration works with WiFi, for whatever reason it fails on AT&T's network. When I had the Wizard I did have this working with a Faria ROM. But since switching to the Hermes I've had no success. I don't really think it has anything to do with AT&T blocking any services, ports, traffic. I'm almost certain of it since VOIP will work on AT&T's network if you use a 3rd part VOIP application like SJPhone or XLite.
Mil3 said:
What softphone do you use? Here is some softphone to try, I test them all on my hermes. They are all working.
Click to expand...
Click to collapse
Tested all 3 of them and, while they can make calls, none of them ring/receive incoming calls...weird...
So nothing at all??
Title says it all. When I'm talking on the phone I'm unable to use wifi data. Browsing, apps which require data, maps, nothing workings while on a call.
I am running CM6 stable but this issue has been around for a while that I can remember.
Is there a work around? Could I be doing something wrong?
Thanks
Someone correct me if i'm wrong, but as far as i'm aware you can't use data and calls at the same time unless if your using 4g, which of course MC6 doesn't yet support.
tomh1979 said:
Someone correct me if i'm wrong, but as far as i'm aware you can't use data and calls at the same time unless if your using 4g, which of course MC6 doesn't yet support.
Click to expand...
Click to collapse
You cannot use 3g data while on a call but I cannot see why you cannot use WIFI while on a call. I will test this on Stock Rooted and let you know in a few minutes.
It must be and issue with CM6 as I am able to make a call and surf the web, access the market, etc.. using WIFI at the same time with stock rooted..
tgruendler said:
It must be and issue with CM6 as I am able to make a call and surf the web, access the market, etc.. using WIFI at the same time with stock rooted..
Click to expand...
Click to collapse
Thanks for the confirmation. I've wondered this as well but I haven't noticed any other CM6 user complain about this issue. Maybe there's something in the settings I need to enable?
Its not cm6 or whatever I am having the same issue. No email or surfing while on the phone and simultaneously connected to wifi. Like the first post "title says it all". I am on Stock sprint rom. Just updated to the 3.70, but this problem has been going on noticably for a week prior maybe longer. I was hoping the update would fix it. Any thoughts? or answer?
You can use wifi whiles on a call to browse internet and use apps that require data. I been doing so since I first got a evo months ago. I only used it on one asop rom and that's cm 6.0 rc2 it worked fine when my gf was annoying me with her boring convo lol so i put on the bluetooth headphones and acted like i was paying attention whiles i was one facebook.
When is the last time you tried? I have been trying to use it on a calls all day, with no luck. Only time Wifi connects is when I hang up.
Scenario a: Wifi is turned off; I initiate call; try to turn on Wifi; Wifi will not connect .
Scenario b: Wifi is on; I initiate call; Wifi will not allow surfing until the phone is hung up.
Also when running speed test while on phone will produce very low speeds less than 64k when my speed should be around 12mbps. Again once phone is hung up the speeds return to normal. The speeds resemble a connection that is being throttled.
Are you connected to a Bluetooth headset while in a call?
Just noticed the blue tooth issue. Thanks for the response, but what gives. Surfing used to work while on bluetooth/phone call. For a while that was my only way to listen to music through my BT headset. I had to initiate a call to voicemail and play Iheart.
timsmooth said:
Just noticed the blue tooth issue. Thanks for the response, but what gives. Surfing used to work while on bluetooth/phone call. For a while that was my only way to listen to music through my BT headset. I had to initiate a call to voicemail and play Iheart.
Click to expand...
Click to collapse
Heh, it's hit and miss for me.
What i've discovered is......
-If WiFi and the Bluetooth device are connected before initiating the call, it should work fine.
-Sometimes, the Bluetooth device can be connected later, as long as WiFi is connected to a network before call is initiated.
-You can disconnect the Bluetooth device during a call, turn on speaker [or not] to continue the call, and WiFi will connect, but will probably disconnect when you reconnect the Bluetooth device.
-Using method above, you can sustain WiFi connectivity whilst Bluetooth device is connected if you start to browse a website or launch a data required app such as an IM or online radio app, then while it's in the middle of connecting to one of those, reconnect the Bluetooth device.
Lot of trouble? Hell yes. I'm not sure if this is a problem with HTC's software or a hardware problem with having WiFi/Bluetooth on the same chip.
I was about to post this question up on the Hero forum but I found this thread. I have the same problem. Wifi will connect unless on a call but......sometimes if you are already connected before initiating call wifi will stay on FOR A BIT. After a while, wifi will disconnect on its own and if you are lucky it will reconnect later on. Note this is not alway the case. It ussually stays off. I just dont understand why this happens.
Ok so I flashed the deodexed (Whitehawkx version) stock rooted T-Mobile update with wificalling. I was super excited for it to be released blah, blah, blah then I went to send an mms. No go. Just hung. So I figured it must be because I'm on a deodexed rooted rom. I asked friend (thanks doc) who had just updated using the T-Mobile method to tey sending an mms while on wificalling. No dice. I'm wondering how many of us have this problem. It seems to be a T-Mobile issue, but I'm no dev. Just a big fan.
Thanks
DARKSIDE
It seems to work for me but it takes forever to send the images/media - unless the phone finally decided to use edge to sent the message while still connected to wifi calling. Though, I assumed once it's connected to wifi calling, it only uses wifi. Can anyone confirm this?
KaneHusky said:
It seems to work for me but it takes forever to send the images/media - unless the phone finally decided to use edge to sent the message while still connected to wifi calling. Though, I assumed once it's connected to wifi calling, it only uses wifi. Can anyone confirm this?
Click to expand...
Click to collapse
I can't answer that for sure. Hmm maybe I don't give it enough time, for me and doc it doesn't send until right after we disconnect from wifi. Thanks for the feedback.
DARKSIDE
This is a problem with the Wifi calling feature. It disables MMS and does this on multiple phones. I had this same problem on my Mytouch 4g as well.
There is a response from a Tmobile employee on the Tmobile support boards for wifi calling and the G2 which says http://support.t-mobile.com/message/4487.
This is normal. WiFi Calling registers through your wifi and disables the mobile networks to do so. Some T-Mobile apps have the ability to temporarily force a GPRS connection to verify you. The only away to avoid this is to disable or turn off WiFi Calling.
This is also why calls drop when leaving your wifi network's signal range. It needs to disconnect and re-register on the T-Mobile network.
Click to expand...
Click to collapse
i have a gs2 in one hand and a mt4g in the other. wifi calling on on both. the gs2 sends instantly without ever connecting to data, the mt4g connects to data and takes ~10 seconds to send. maybe depends on things like your router or something.
mikeyinid said:
i have a gs2 in one hand and a mt4g in the other. wifi calling on on both. the gs2 sends instantly without ever connecting to data, the mt4g connects to data and takes ~10 seconds to send. maybe depends on things like your router or something.
Click to expand...
Click to collapse
Mms? Crazy. I have a mytouch4g also and did the same thing and the mytouch4g sent and gs2 not at all. Haha. Oh well thanks.
DARKSIDE
raycaster3 said:
Mms? Crazy. I have a mytouch4g also and did the same thing and the mytouch4g sent and gs2 not at all. Haha. Oh well thanks.
DARKSIDE
Click to expand...
Click to collapse
the reasom i suggest it being router is that at work on company wifi, cant send or receive mms w/wifi calling on. at home it sends no problem, and here on the hospital wifi it sends fine also, idk
mikeyinid said:
the reasom i suggest it being router is that at work on company wifi, cant send or receive mms w/wifi calling on. at home it sends no problem, and here on the hospital wifi it sends fine also, idk
Click to expand...
Click to collapse
I'll check at some diffferent places to see what's up. I appreciate the info.
DARKSIDE
raycaster3 said:
I'll check at some diffferent places to see what's up. I appreciate the info.
DARKSIDE
Click to expand...
Click to collapse
Did you update your baseband to the most recent one. That could be a problem.
Sent from my SGH-T989 using xda premium
Killbynature said:
Did you update your baseband to the most recent one. That could be a problem.
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
No, but the other person who had the problem did update everything including the baseband and he had the issue.
DARKSIDE
Mine will not mms on wifi either. It doesn't even send once you get back on cell. It just says sending. My vibrant was the same way!! Fck! Annoying!
escrowdog said:
Mine will not mms on wifi either. It doesn't even send once you get back on cell. It just says sending. My vibrant was the same way!! Fck! Annoying!
Click to expand...
Click to collapse
Yeah I'm not too thrilled either since it worked on sensation and mytouch4g and mytouch4g slide. What gives?
DARKSIDE
mikeyinid said:
the reasom i suggest it being router is that at work on company wifi, cant send or receive mms w/wifi calling on. at home it sends no problem, and here on the hospital wifi it sends fine also, idk
Click to expand...
Click to collapse
You need to remember that the firewall settings are different from place to place. As an example I use a Cisco router at home and WiFi calling will connect but I could not hear the person on the other end initially. I had to look at what the router was doing, figure out what the firewall was blocking and unblock it.
It's likely the firewall at your work is letting some, but not all of the necessary traffic through. You could ask the IT guys if they can look and see what their firewall is blocking from your phone and ask them if they'll unblock it... They may or may not want to help and they may use the information to completely block your phone from being able to connect to the tmobile servers on the other side.
Hi all,
I searched the forums for this topic and haven't been able to find anything that addessess this exactly...
I have a rooted SGS2 with Whitehawkx's rom installed. I have been using it for over a week now and noticed that even if wifi calling is enabled, I often get an "unable to connect" error, then when I actually get the Wifi calling to work, the call quality is really bad.
Has anyone else experienced this? If so is there any kind of fix or work-around?
Thanks!
Madi
Are you using the sim card that came with the device? That could be the problem.
Sent from my SGH-T989
I got a new SIM card when I bought the phone. It does "work" meaning I can usually get wifi calling enabled after a few tries, although not always.
When I call comes in the wifi calling icon goes from blue to green, like it's supposed too, but the calls sounds like the person on the other end has a very bad stutter, so I miss half the conversation...
Madi
In that case I don't know what could be causing that problem. IM currently running juggernaut 4.0 with the new modem and wifi calling is working perfectly. I hope someone can help!
Sent from my SGH-T989
How is the quality of your internet connection?
Sometimes poor internet or local isp might be the problem.
Try running speedtest.net test and report
Sent from my SGH-T989 using XDA App
I am getting 5424 kbps download and 356 kbps upload...
Call quality on Wifi calling could be because of ANYTHING , network related, it is a VOIP based service.
The things that could be causing it,
Internet Connection (not just speed but packet loss)
Router (the type of router , including firewall, and stateful packet inspection, UPNP)
Wireless Access Point, try changing the channel on your AP
and many more things , related to network traffic ..
My call quality bounces from great to crappy depending on what is going on, on my network.
Hi thanks for the info. Tried connecting to a different router, was using my new Cisco, Burr had better quality when connected to my old Belkin. It's stool not great but it's better.
Thanks
Sent from my SGH-T989 using XDA App
just wanted to bump this thread as I am having the same problems stated in the OP.
Info in sig. got a new sim card from tmobile today. got home, connected to wifi calling, worked for about an hour with choppy quality then disconnected. tried connecting again later on and keep getting the "Error REG99 Unable To Connect" message
Tmobile support forums say this is a known issue with the SGS2 but am just wondering if others are experiencing the issue and weather its rom related or the service is down altogether.
i also tried flashing different kernel just in case (faux to darkside) but no results
anybody insight or suggestion are appreciated
will also try flashing Blaze LB7 radio
I have an unrooted Galaxy S4 Spark. I always connect, but the voice is totally unuseable.
It's not my network. I can run video calls on Skype while downloading large files at the same time.
I don't think Sprint has their heart in Wi-Fi calling. I also suspect they have allocated VERY LITTLE bandwidth to support it.
I love the phone and having the hardest time resisting turning the phone back in. I'm on my 2nd S3 and my third Sim card. Everything appears to be going well but I noticed that when my phone is in WiFi calling mode, incoming calls go straight to voice mail. I don't get an alert or anything. If they leave a voicemail, I get that. I searched other phones that have had this issue not just the S3. I am running stock OS but I am rooted.
Can anyone else verify that there incoming calls are working on Wifi Calling ? Any ideas on what I could try ? outgoing calls work fine.
EDIT: Sometimes calls go through, sometimes it doesn't. When it does go through, I can't swipe the green button to answer. It goes through the swipe motion but nothing happens. When I am off of WiFi calling, I can receive calls correctly and I can properly swipe to answer them
soljaofjesus said:
I love the phone and having the hardest time resisting turning the phone back in. I'm on my 2nd S3 and my third Sim card. Everything appears to be going well but I noticed that when my phone is in WiFi calling mode, incoming calls go straight to voice mail. I don't get an alert or anything. If they leave a voicemail, I get that. I searched other phones that have had this issue not just the S3. I am running stock OS but I am rooted.
Can anyone else verify that there incoming calls are working on Wifi Calling ? Any ideas on what I could try ? outgoing calls work fine.
EDIT: Sometimes calls go through, sometimes it doesn't. When it does go through, I can't swipe the green button to answer. It goes through the swipe motion but nothing happens. When I am off of WiFi calling, I can receive calls correctly and I can properly swipe to answer them
Click to expand...
Click to collapse
Ah-ha, you just solved a mystery for me! I like to have my phone automatically connect to any wifi in my usual hangouts to save data. I kept wondering why I was missing calls without hearing my ringtone. I have a theory on what is happening. Back on my old Vibrant, wifi-calling could not work on slower networks. I could get it to initialize but never could it actually make a call. I noticed this when up in the mountains at a lodge that had very slow internet. Maybe it's the same issue? Hopefully others will chime in.
Not sure if this a slow network issue or and ICS issue. My S3 does this also and is frustrating since I auto connect to wifi at home and work. Keep missing damn calls. My S2 started doing the same thing when I updated from GB to ICS. Maybe its a Samsung and ICS thing now that I think about it because the wife and kids all run ICS on HTC Amaze without issue.
Click to expand...
Click to collapse
Disappointing. Are you on T-mobile? (I expect yes as this, to my understanding, is the only US network licensed to use wifi calling?)
I am thinking of buying an S3 but I have to have wifi calling working on UK operator orange.
Click to expand...
Click to collapse
I think most of these threads are locked because XDA is trying to separate them all. Anyways, this is the only way I could respond. Since my first post, I have had more positive experiences with wifi-calling. I think it may be a little of both, slow connection and this newer implementation. On a slow connection it definitely wont work correctly which is what I would expect. What I mean is you can't successfully answer or make a call as the phone app will just hang. Going straight to Voicemail is another mystery altogether. I have 4g internet at home so there is no reason I can think of for that to happen. But like I said since my first post I have successfully made and answered several calls from home using wifi-calling and even a few from a location that had decent internet. Call quality was decent for what it is.
Guys, take a look at this thread. It concerns wifi signal dropping and re-enabling. That would certainly explain why some of the calls made to me when I was at home on wifi went to Voicemail even though I have 4g. I did notice some of this last week.
http://forum.xda-developers.com/showthread.php?t=1790187
Not sure if this a slow network issue or and ICS issue. My S3 does this also and is frustrating since I auto connect to wifi at home and work. Keep missing damn calls. My S2 started doing the same thing when I updated from GB to ICS. Maybe its a Samsung and ICS thing now that I think about it because the wife and kids all run ICS on HTC Amaze without issue.
Wifi Calling
sflagg73 said:
Not sure if this a slow network issue or and ICS issue. My S3 does this also and is frustrating since I auto connect to wifi at home and work. Keep missing damn calls. My S2 started doing the same thing when I updated from GB to ICS. Maybe its a Samsung and ICS thing now that I think about it because the wife and kids all run ICS on HTC Amaze without issue.
Click to expand...
Click to collapse
Disappointing. Are you on T-mobile? (I expect yes as this, to my understanding, is the only US network licensed to use wifi calling?)
I am thinking of buying an S3 but I have to have wifi calling working on UK operator orange.
This happens on sprint phones as well...
I see this thread is open again. My experiences with wifi-calling have bore out what I thought: A weak signal will cause problems. I only wish that every call went to voicemail. What happens often with me is that wifi-calling will partially work, as in I can answer a call but the person can't hear me at all and I may catch one or two words from them. If they terminate the call, the phone app is fine, but if I terminate the call, the phone app hangs and freezes everything! Today it was so bad I had to pull the battery and reboot. Maybe wifi calls going to voicemail is an imperfect function that Samsung or rather T-Mobile built into the app. It kinda makes sense as this app could never complete a wifi call if you were connected to slow internet when it was a separate app. In any case I would rather have my wifi calls go straight to voicemail (and get a pop-up notification) than have the app try to work but wind up hanging my phone. What do you guys think?
I don't know about slow networks. I've already exchanged one T-Mobile S III because of Wi-Fi calling problems. My replacement works much better on my work network than it does on my home network and it is much, much slower than my home network is.
dcugooner said:
I don't know about slow networks. I've already exchanged one T-Mobile S III because of Wi-Fi calling problems. My replacement works much better on my work network than it does on my home network and it is much, much slower than my home network is.
Click to expand...
Click to collapse
This isn't particularly good news for me. If it isn't software problem that manifests when coupled with a slow network then a future update won't fix it. That's what I was hoping the problem would turn out to be. If its hardware, then the time I have to do something about it is limited as I dropped my first phone and the replacement has a limited warranty, I think. Plus, I've paid to have invisi-shield placed on the front and back and would have to eat that cost if I get another replacement.
Epic Fail
I have this issue and am at my wits end to resolve it. Wifi calling is a major feature that worked fine(except echo) with my Vibrant. However, nothing I have tried will fix my ability to answer calls on WiFi. I have the SIM from the GS3 box. My E911 address exists since my bb8900. WiFi Power Save is off. All routers I use, Linksys E4200 and Linksys WNR1000, Linksys 614. Wireless N and G. T-mo CS could not help. I understand that the WiFi calling changed from UMA to IMS. No separate app. GS2 users with same issue. Anyone with a clue? Please help.
IrieBro said:
I have this issue and am at my wits end to resolve it. Wifi calling is a major feature that worked fine(except echo) with my Vibrant. However, nothing I have tried will fix my ability to answer calls on WiFi. I have the SIM from the GS3 box. My E911 address exists since my bb8900. WiFi Power Save is off. All routers I use, Linksys E4200 and Linksys WNR1000, Linksys 614. Wireless N and G. T-mo CS could not help. I understand that the WiFi calling changed from UMA to IMS. No separate app. GS2 users with same issue. Anyone with a clue? Please help.
Click to expand...
Click to collapse
how did you turn off the wifi power save?
I experience the bad quality calls on wifi, at my workplace it is perfect, but at my home, its terrible.
my home network is faster than my workplace.
I think this is something to do with the firewall as well.
and I couldn't find the way to turn off firewall on the dam verizon fios actionnet router.
---------- Post added at 01:27 PM ---------- Previous post was at 01:27 PM ----------
you can also try to broadcast the wifi on channel 3 only, that helped me in my case.
WPSM
There is a link earlier in this thread to another XDA thread. Phone app --> *#0011# --> menu button --> WiFi--> Press WPSM On/Off button.
My GS3 would drop a WiFi signal 3 inches from the router at work and 3 feet from the router at home. At least THAT is fixed now. However, I don't seem to get the same WiFi signal range as my Vibrant did using the same routers Trying the channel 3. I do have a few setting set to auto at least on my home router.
-greenboy- said:
how did you turn off the wifi power save?
I experience the bad quality calls on wifi, at my workplace it is perfect, but at my home, its terrible.
my home network is faster than my workplace.
I think this is something to do with the firewall as well.
and I couldn't find the way to turn off firewall on the dam verizon fios actionnet router.
---------- Post added at 01:27 PM ---------- Previous post was at 01:27 PM ----------
you can also try to broadcast the wifi on channel 3 only, that helped me in my case.
Click to expand...
Click to collapse
when my wifi calling was giving me issues i had to go on the tmobile site and set my area for 911 calls for the wifi calling. after that it worked flawlessly
duhitsrandy said:
when my wifi calling was giving me issues i had to go on the tmobile site and set my area for 911 calls for the wifi calling. after that it worked flawlessly
Click to expand...
Click to collapse
Yes, that's required, but not the underlying issue of the thread.
I've had wifi calling weirdness too. I called my sisters Verizon cell and there was no tone but after xx seconds it got her voicemail. When I call my phone on my house phone (Comcast) my phone rings but there's no tone on the house phone!
I NEVER get a ring. Just someone picks up our voicemail does.
Sent from my SGS3 Stock Rooted & Odexed
I love this thing!