hi there. i got a big problem with my phone. ive searched but i couldn find anything.
ok when i press the call button instead of starting the Phone it opens Contacts and Calendar
and when i press the end button opens Calendar.
i dont know what the hell happen. i just froze yesterday and i softreset it (usual stuff) and after that it just happen.
You probably tryied already to softrest it again.
Did you install any new software?
Have you checked the button assignment on options?
If all fails, hardreset :/
there is a new version of AE Button! The Button map application! Any experiences? Is there an improvement for the HD? Let´s test
Anyone tried?
I wish to know too =)
Is it free?
I have this registered.
The unregistered version is actually almost fully functioning and well worth trying.
I choose to register since I found the application useful and it seemed fair to pay the developer.
THANKS, for the new version alert. But, I suspect there is little new as the history details for this version are:
02.02.2009(v2.6.6):
Fixes:
Backlight works on HP 612c now
Languages:
Updated Traditional Chinese resources (thanks to Chow Yuh)
AE Button
I find this software very useful. It completely eliminates the need of locking/unlocking software for me.
I just set double or triple tap to answer and hang up keys. This will prevent accidental key press when taking HD out of pocket. To answer call, simple double/triple tap on answer key or simply slide on screen to answer (built-in screen lock will be unlocked during incoming call).
Set press and hold volume up to toggle wireless and down to toggle bluetooth.
This one single software solved all my screen locking + lack of buttons issues!! Believe me i tried touch lock pro, sensor lock, slide to unlock and what ever you can think of (I didnt like because I think its not really practical for me to be rolling phone 180 degrees or shaking back n fourth in meetings to answer a call.)...I know you guys may argue it has light sensors to unlock, but I'll be in meetings and presentations which might be low light conditions. I do not want to set very small for polling interval either. If you have tried all else, no harm in trying this.
if you guys face the same problem like me, this tiny software might be the right solution for you.
The best combination for me:
Gyrator2 (fine tuned based on my apps) + Lumos + AE Button Plus + Touch Response (for onscreen keypress only).
The only flaw that i could find to complain is that they should really change the icon...it looks like bread/potato/or whatever...
Headset Buttons
Hi there,
is this program able to capture the button press events from a headset wired/wireless?
What I'd like to achieve is, to switch to the next song in Mediaplayer as long there is no incoming or active call.
Is that possible?
Thx in Advance
Steve
noctifer said:
Hi there,
is this program able to capture the button press events from a headset wired/wireless?
What I'd like to achieve is, to switch to the next song in Mediaplayer as long there is no incoming or active call.
Is that possible?
Thx in Advance
Steve
Click to expand...
Click to collapse
Hi, I believe not. I understand the press events from headsets and bluetooth AVRCP are actually trapped in the hardware by HTC and by-pass the operating system and are sent directly to TF3D music or WMP.
If you check on the AEB plus site: http://ae.inc.ru/ it says the app is not for specific applications.
(Also: the AEB+ icon does look like a loaf of bread !!)
Will it allow me to remap the Home button on the Touch HD?
CorruptedSanity said:
Will it allow me to remap the Home button on the Touch HD?
Click to expand...
Click to collapse
Nope. All the others but not the home button.
I have:
1. volume up. 1 press = arrow up, 2 press = volume up, long press = plamp (flash light)
2. volume down. 1 press = arrow down, 2 press = volume down, long press = resco notes recorder (auto)
3. OK / back. 2 press = rotate screen 90 deg
I keep the long press on phone end and long press on phone start handled by the system.
Dave, thanks a lot and you have some very smart short cuts
I may very well adopt them too.
CorruptedSanity said:
Dave, thanks a lot and you have some very smart short cuts
I may very well adopt them too.
Click to expand...
Click to collapse
Thanks, but I'm needing a suggestion for replacing the flash light. Never used this now "for real" so I shall find something else for the long volume up press ...
I have almost identical settings but use the long up as a bluetooth toggle. This is a fantastic program and really eliminates one of the few shortcomings of this phone.
Cheesy Dave said:
long press = plamp (flash light)
Click to expand...
Click to collapse
do you know where i can get this plamp please?
P Lamp v1.5 http://pda.jasnapaka.com/plamp/
Question guys,
How do I map the call button to long press (like the smallest long press ever) to get the Start menu?
Thanks
Sorry, I don't understand what you want. Is "call button" the "end call" or "start call" ?
Dave, call button is the left-most button that answers/makes a call. If it were colored, it would have been green.
I want to short press it to start menu (heres the tricky part, I have Quick Menu as my start menu).
Basically I miss the Start button from my TyTn II (Kaiser) and the scroll on the top. I have managed to set the volume buttons as scroll up/down and want the start call button to imitate the start menu button when I long press it. But I want to long press it for as little time as possible. So say 1 second as opposed to 3 seconds.
I see. So, two points:
1. Get quick menu
2. Use a "short" long press
I asked because the green/start left button is assignable in the standard settings - button to the <start menu> but I don't know how to do this to quick menu. I guess if you make a short cut to quick menu and drop this somewhere in the Programs folder in windows (or a sub-folder) then the standard settings - button should find it OK.
But, for option 2 I have no idea. Instead of the "short" long press how about using AEB+ with a double press ?
Dave, I see from the options that you can set the delay. I guess this from the "Key Press timeout" menu where you can select units of time starting with 200ms to 900ms. I am guessing that 200ms of time needed for a long press would be the shortest longpress possible.
Any how, how to assign the green button to start menu? It doesnt work for me. I have it as 2 presses or 3 presses or long press for start menu but nothing happens.
one problem it works to rotate(volume up which i assigned) but as soon as i make a call or recieve a call it no longer works untill i soft reset???? im i missing a setting or something? i have duttys rom, please help! : ) thanks!
Hi guys,
My X1 has developed a really annoying fault. It seems the enter key (the optical joystick button) is getting randomly pressed, which totally messes up my texting (it creates a new line) and my calls (it puts the phone in and out of hold).
This is not fixed by using the "disable optical joystick" option, which just stops the joystick functionality, and not the actual press Enter functionality.
Is there some way or App i can use to fiddle with what this key actually does? Im a newb at all this kind of stuff, but it really is life or death for the phone.
Thanks for any help you can give.
John
Give AE Button a try, could probably help you.
(Do not remembre if it is still free, however the idea is: search the forum for a button mapper program)
Hey guys,
I'm on stock Desire ROM and have a question:
I don't know if it irks anyone else, but having to press end call on the screen (which can go away, i know it goes to notifications too, but still a little fiddly for my like) annoys me a little. I'd much rather be able to press a button on the desire to end a call quickly rather than fiddling around finding end call.
Is there any way to map a button so that it ends the current call if one is active?
I know you can assign long press of the search key to actions, can you do this with the back button? Could i long press the back button to end calls?
Thanks in advance
Just gotten your desire? 'Cause I found it a bit annoying in the beginning first, plus it was confusing the hell outta me. But I quickly adapted and now I'm used to it.
I've had it for a few months now, but every phone i've had before has had a hardware hangup so i've become quite attached.
since the gingerbread update the hardware keyboard of my desire z is unusable.
there are some keys that do strange things when I press them, I have not changed any settings since the update.
I'm talking about this:
when I press "G" my phone automatically goes to gmail
when I press "S" my phone goes to my messages
when I press "B" it goes to my browser
I tought about shortcuts but in the menu there I can't see any shortcuts dedicated to this keys.
anybody an idea how to fix?
other people having the same problem?
I've ran into this a couple of times as well, as far as I know it's supposed to be a feature rather than a bug. Try pressing "FN" and then "SYM" and go back to composing your message, this usually fixes things for me.
As this has been answered a bunch of times....
Settings -> Applications -> Quick launch.
Remove every shortcut and you're done
dumraden said:
As this has been answered a bunch of times....
Settings -> Applications -> Quick launch.
Remove every shortcut and you're done
Click to expand...
Click to collapse
While that does address the issue at hand, my question is how did they get activated, I never had this problem before i updated to 2.3.3.
I have no idea either. The quick launch settings are there when you first flash a rom. The strange thing is they go crazy and start working without the need to press the "search" button on the keyboard...
I have been on CM7 for the longest time and haven't updated to a newer nightlies for a the past couple of weeks, but I am having the same issue.
UPDATE:
Tried pressing the search button on the keyboard a couple times and it is now working fine. I guess the search button was "stuck"? Funny because I never used the button before.