App for enter key disabling/changing? - XPERIA X1 Themes and Apps

Hi guys,
My X1 has developed a really annoying fault. It seems the enter key (the optical joystick button) is getting randomly pressed, which totally messes up my texting (it creates a new line) and my calls (it puts the phone in and out of hold).
This is not fixed by using the "disable optical joystick" option, which just stops the joystick functionality, and not the actual press Enter functionality.
Is there some way or App i can use to fiddle with what this key actually does? Im a newb at all this kind of stuff, but it really is life or death for the phone.
Thanks for any help you can give.
John

Give AE Button a try, could probably help you.
(Do not remembre if it is still free, however the idea is: search the forum for a button mapper program)

Related

Lock single buttons

Hi,
I've been looking for an application that would enable you to select which buttons should be locked when the device is off. Right now, the only options are "none" or "all but the power button".
I'd like to lock all the hardware buttons except the "record" key (which I have mapped to MS Voice Command). That one isn't easily pressed by accident, so it wouldn't turn my device on all the time and waste battery life, and I'd be able to start MS VC without pressing the power button first.
Any ideas?
Don't want to be pushy but... *bump*!
Anyone heard of an application that does this? Or any developers interested in making one? I'm thinking... Vijay?
I think it could possibly be done, using a low level keyboard driver hack, but I'm thinking it'd be a little bit messy to program right now, I've got a few other things to finish first.
I'll try to test some ideas, but can't promise to release anything very soon
V
Hey, thanks for your reply! You don't have to promise anything... I was just trying to inspire you. But you have to admit it would be a useful app!

[Q] Atom Life wake up with other buttons

I used to have an XDAII (the very first) where the unit could be woken up by pressing any button. There was a setting in the control panel that allowed you to set it to only recongnize the power button or have the other buttons wake it up. Naturally I set it to the power button, but after a while, that button got worn down and stopped "working" so I naturally set it to recognize any other button.
This experience has taught me the hard way, that its a good choice to have (or maybe even a necessity in some cases) that other buttons to wake the unit up in case of situations like this.
I've just bought an Atom life and unfortunately it ONLY recognizes the power button to wake the unit up. Is there any hack or software out there that could enable the other buttons (or better yet, allow selection of which buttons can turn the unit on)?
I'd like to use the large middle button on the front if possible, since that button seems more "sturdy" than the power button. I may be able to save that poor power button from years of wear and tear.
just realized i posted in the wrong section. Moderators, feel free to move it to the parent Atom section, and my sincerest apologies
Hi, nargalzius
I have been search for decade, but i still cannot find the way to assign other button for waking up da device......
same problem here...
anybody out there figured this one out already?
bump
did anybody find a hack for this?
I have just the opposite problem. I use the headphones that come
with the Atom Life - the button on it not only turns on the device.. if
you bang the mouth piece on something (without hitting
the button), it turns it on too!! I'd love a solution to that
I use O2 Flame and got the same setting, no other hard key than the power button can wake up the device from sleep. Anyone knows the tricks or registry hacks, please share. Thank you very much.
Atom Life Wakeup Button
Hi guys, there doesn't seem to be an answer on here and I assume the reason is as follows - Atom Life also wakes up by pressing the "end" key... (I think this is a general hardware setup)
I was also a bit weary of the power button being worn out, so I did some experimentation and found that the end button works a treat if you have the same concern "end - s2u"... swweeet!
Hope this helps.
vishaal said:
Hi guys, there doesn't seem to be an answer on here and I assume the reason is as follows - Atom Life also wakes up by pressing the "end" key... (I think this is a general hardware setup)
I was also a bit weary of the power button being worn out, so I did some experimentation and found that the end button works a treat if you have the same concern "end - s2u"... swweeet!
Hope this helps.
Click to expand...
Click to collapse
You mean when the phone is in standby mode and you press the END key, the phone will come out of standby? Beats the whole purpose of standby then
I do echo the same "problem" of not being able to change the mapping of the power button to the front button.. ( as I was able to do with my XDA II)
I 'm confused about the "end" key solution..
Anyone finding a solution ?
Thank you all
Nearest program might be MORT saver? it allows you to specify the button that put the device in to MORT stand by and therefore the same button that will awake the device. Not exactly the power button option that you talk of wanting but at least MORT also stops the device from waking up when any of the buttons around the action button are pressed.

WM 6.1, change key mapping Back to End

My End key (the red button) stops working. Does anyone know how to change the key mapping so that I can use a different button (let say the back button) as the END/Stop button. The phone is working fine however, I can't end the conversation because the button is not working. It's driving me nut. Please help. Thanks
xlenh said:
My End key (the red button) stops working. Does anyone know how to change the key mapping so that I can use a different button (let say the back button) as the END/Stop button. The phone is working fine however, I can't end the conversation because the button is not working. It's driving me nut. Please help. Thanks
Click to expand...
Click to collapse
AE Button plus will do it. You can set it to any key you want, with single, double, or triple press, or even a long press. It cost 7.99, but much cheaper than a phone.
maybe I need to go this route. Thanks
Does anyone know which button is which number? Like to change the wheel into a volume control is it key 6?
I'm an idiot... not in the kaiser forum... damn search lol

AE Button 2.6.6 - 2.2.09 - Experiences

there is a new version of AE Button! The Button map application! Any experiences? Is there an improvement for the HD? Let´s test
Anyone tried?
I wish to know too =)
Is it free?
I have this registered.
The unregistered version is actually almost fully functioning and well worth trying.
I choose to register since I found the application useful and it seemed fair to pay the developer.
THANKS, for the new version alert. But, I suspect there is little new as the history details for this version are:
02.02.2009(v2.6.6):
Fixes:
Backlight works on HP 612c now
Languages:
Updated Traditional Chinese resources (thanks to Chow Yuh)
AE Button
I find this software very useful. It completely eliminates the need of locking/unlocking software for me.
I just set double or triple tap to answer and hang up keys. This will prevent accidental key press when taking HD out of pocket. To answer call, simple double/triple tap on answer key or simply slide on screen to answer (built-in screen lock will be unlocked during incoming call).
Set press and hold volume up to toggle wireless and down to toggle bluetooth.
This one single software solved all my screen locking + lack of buttons issues!! Believe me i tried touch lock pro, sensor lock, slide to unlock and what ever you can think of (I didnt like because I think its not really practical for me to be rolling phone 180 degrees or shaking back n fourth in meetings to answer a call.)...I know you guys may argue it has light sensors to unlock, but I'll be in meetings and presentations which might be low light conditions. I do not want to set very small for polling interval either. If you have tried all else, no harm in trying this.
if you guys face the same problem like me, this tiny software might be the right solution for you.
The best combination for me:
Gyrator2 (fine tuned based on my apps) + Lumos + AE Button Plus + Touch Response (for onscreen keypress only).
The only flaw that i could find to complain is that they should really change the icon...it looks like bread/potato/or whatever...
Headset Buttons
Hi there,
is this program able to capture the button press events from a headset wired/wireless?
What I'd like to achieve is, to switch to the next song in Mediaplayer as long there is no incoming or active call.
Is that possible?
Thx in Advance
Steve
noctifer said:
Hi there,
is this program able to capture the button press events from a headset wired/wireless?
What I'd like to achieve is, to switch to the next song in Mediaplayer as long there is no incoming or active call.
Is that possible?
Thx in Advance
Steve
Click to expand...
Click to collapse
Hi, I believe not. I understand the press events from headsets and bluetooth AVRCP are actually trapped in the hardware by HTC and by-pass the operating system and are sent directly to TF3D music or WMP.
If you check on the AEB plus site: http://ae.inc.ru/ it says the app is not for specific applications.
(Also: the AEB+ icon does look like a loaf of bread !!)
Will it allow me to remap the Home button on the Touch HD?
CorruptedSanity said:
Will it allow me to remap the Home button on the Touch HD?
Click to expand...
Click to collapse
Nope. All the others but not the home button.
I have:
1. volume up. 1 press = arrow up, 2 press = volume up, long press = plamp (flash light)
2. volume down. 1 press = arrow down, 2 press = volume down, long press = resco notes recorder (auto)
3. OK / back. 2 press = rotate screen 90 deg
I keep the long press on phone end and long press on phone start handled by the system.
Dave, thanks a lot and you have some very smart short cuts
I may very well adopt them too.
CorruptedSanity said:
Dave, thanks a lot and you have some very smart short cuts
I may very well adopt them too.
Click to expand...
Click to collapse
Thanks, but I'm needing a suggestion for replacing the flash light. Never used this now "for real" so I shall find something else for the long volume up press ...
I have almost identical settings but use the long up as a bluetooth toggle. This is a fantastic program and really eliminates one of the few shortcomings of this phone.
Cheesy Dave said:
long press = plamp (flash light)
Click to expand...
Click to collapse
do you know where i can get this plamp please?
P Lamp v1.5 http://pda.jasnapaka.com/plamp/
Question guys,
How do I map the call button to long press (like the smallest long press ever) to get the Start menu?
Thanks
Sorry, I don't understand what you want. Is "call button" the "end call" or "start call" ?
Dave, call button is the left-most button that answers/makes a call. If it were colored, it would have been green.
I want to short press it to start menu (heres the tricky part, I have Quick Menu as my start menu).
Basically I miss the Start button from my TyTn II (Kaiser) and the scroll on the top. I have managed to set the volume buttons as scroll up/down and want the start call button to imitate the start menu button when I long press it. But I want to long press it for as little time as possible. So say 1 second as opposed to 3 seconds.
I see. So, two points:
1. Get quick menu
2. Use a "short" long press
I asked because the green/start left button is assignable in the standard settings - button to the <start menu> but I don't know how to do this to quick menu. I guess if you make a short cut to quick menu and drop this somewhere in the Programs folder in windows (or a sub-folder) then the standard settings - button should find it OK.
But, for option 2 I have no idea. Instead of the "short" long press how about using AEB+ with a double press ?
Dave, I see from the options that you can set the delay. I guess this from the "Key Press timeout" menu where you can select units of time starting with 200ms to 900ms. I am guessing that 200ms of time needed for a long press would be the shortest longpress possible.
Any how, how to assign the green button to start menu? It doesnt work for me. I have it as 2 presses or 3 presses or long press for start menu but nothing happens.
one problem it works to rotate(volume up which i assigned) but as soon as i make a call or recieve a call it no longer works untill i soft reset???? im i missing a setting or something? i have duttys rom, please help! : ) thanks!

AE button plus - question

Hi,
I have the following problem with AE Button plus with my Touch HD.
I had the problem with closing the phone during i was taking it out of my pocket.
I installed AE Button plus and assigned only to the Red button a function. All is OK, when the phone is ringing the Red button is not working, but the problem is, that when i pick up, it is not working again and i have to end the call with the touch screen button and it is very annoying.Is it possible this Red button function to work only up to the moment i have answered and after that to have normal button functionallity?
PS. Sorry for my bad English!
AE Button Plus - please help
Please, help me with the above issue!
Thanks in advance!
why is it annoying to use the touch screen to end the call?
I would suggest to leave alone the single click of red button but instead map a double click function you want to the red button.
I've had this problem previously. I love AEBPlus and think it is probably the best app on the phone. You need to uncheck the option under 'other options' for 'drop on red key'. Paradoxically this should not be checked. When checked I cannot drop on red key but when unchecked I can end call using this hardway end key. Let me know how you get on!
The AE Button Plus didn't seem to work on my Blackstone (HD). It would work after being reset but after a while, the mapping has no effect anymore. I want to map the volume up/down button to "Up/Down Arrow" and the Long Press of the Volume Up button to run the S2U2 application. Anyone has similar issues?
I have problems with AEButton too. I assign "volume up" to turn display on/off at one click. Sometimes, it works. Sometimes, it brings up the voume control. Annoying.
tatou said:
I have problems with AEButton too. I assign "volume up" to turn display on/off at one click. Sometimes, it works. Sometimes, it brings up the voume control. Annoying.
Click to expand...
Click to collapse
That is exactly my problem. I should not have paid for the software if I knew that it works intermittently.
Do you have some taskbar installed? Try to remove.

Categories

Resources