so i thought i did the right thing...to start from the top...my old evo broke...got a new evo...didnt update the prl...rooted/flashed a new rom and boom...my internet blows...its stuck on 1x...so..i flashed a sense rom...updated the prl...now im missing something because when i go back to the roms i wanna use...its still stuck on 1x...what am i doing wrong?
phillyzxp said:
so i thought i did the right thing...to start from the top...my old evo broke...got a new evo...didnt update the prl...rooted/flashed a new rom and boom...my internet blows...its stuck on 1x...so..i flashed a sense rom...updated the prl...now im missing something because when i go back to the roms i wanna use...its still stuck on 1x...what am i doing wrong?
Click to expand...
Click to collapse
You're most likely not doing anything wrong. I assume you're using an AOSP rom. Aosp roms show your true signal, if you're on 3g or 1x. Sense roms show 3g all the time, even if you're on 1x. Sense lies to you. Aosp shows the truth. Although there is now a mod that allows you to see true signal on Sense as well now.
Sent from my PC36100 using XDA App
phillyzxp said:
so i thought i did the right thing...to start from the top...my old evo broke...got a new evo...didnt update the prl...rooted/flashed a new rom and boom...my internet blows...its stuck on 1x...so..i flashed a sense rom...updated the prl...now im missing something because when i go back to the roms i wanna use...its still stuck on 1x...what am i doing wrong?
Click to expand...
Click to collapse
A PRL is a "preferred roaming list" and has nothing to do with data speeds unless you're talking about data speeds when you're roaming. Do you mean that you are getting no 3G coverage at all?
phillyzxp said:
so i thought i did the right thing...to start from the top...my old evo broke...got a new evo...didnt update the prl...rooted/flashed a new rom and boom...my internet blows...its stuck on 1x...so..i flashed a sense rom...updated the prl...now im missing something because when i go back to the roms i wanna use...its still stuck on 1x...what am i doing wrong?
Click to expand...
Click to collapse
Are you sure you are getting 3g at all? Sense doesnt tell you when you are on 1x unless you grab an app for that. Are the 1x culprits all aosp and you are just under the impression you are getting 3g on sense when in all reality you are not? Run a few speedtest.net tests and let us know what your speeds are on both on both. I doubt your speed changed.
hmmm...interesting....well im running MIUI...but its weird...because i used to get good signal...i wonder if maybe this is tying in too all the problems it seems a lot of people are having...im gonna run the speed test right now and see
signal and speed arent necessary related, though i believe aosp does calculate that into theirs. On sense it is (almost?) always separate. Anyhow I have only seen a few phones get "stuck" internally at 1x, no worries that would also be fixable.
You may just be having tower issues, thank sprint for that. Another good question is do you get 3g on a diff tower? drive out of the range of your current tower and see what ya get.
yea im gettin a steady 1x from home all the way to work which is about 15 miles away...
my first test:
Ping: 558ms Dl:125 Ul:148
second test:
ping: 807ms Dl: 126 Ul: 140
3rd:
ping: 786ms dl: 126 ul: 143
im not too knowledgable about this stuff....but i feel like the numbers are good right?
No, those are def 1x speeds. Sprint average is 540k. Being that you have used multiple towers i would assume its the phone. Grab easy settings from triforce, luke and see what the settings are. If you cant get back to 3g you may want to grab the 2g/3g toggle from triforce, luke for a buck and set it to hybrid or evdo only and see if that works. Its the only thing that helped me once.
I tried profile restores, other prls, everything. Have you tried any other prls? I wouldnt suggest a profile restore because you dont have 3g and it needs that to provision.
Have you gone into ##3282# (sense rom), and cleared your profile data (top item, then menu IIRC). This will cause the phone to reboot, and do an OTA activation on the subsequent boot.
Have you messed with your 3g settings - meaning, is the device being forced into cdma mode only??
Which rom did you specifically flash?
And I guess most importantly, before you did anything, did you ensure 3g/4g work with the phone in its stock state?
gpz1100 said:
Have you gone into ##3282# (sense rom), and cleared your profile data (top item, then menu IIRC). This will cause the phone to reboot, and do an OTA activation on the subsequent boot.
Have you messed with your 3g settings - meaning, is the device being forced into cdma mode only??
Which rom did you specifically flash?
And I guess most importantly, before you did anything, did you ensure 3g/4g work with the phone in its stock state?
Click to expand...
Click to collapse
I had this same issues awhile back and the quoted text is what worked for me.
you can try a profile restore but it may not activate well without 3g. Sprint told me that themselves, so have others...though it did activate for me, i have seen people get stuck though for a bit...
well...from what i understand i guess i have no idea if 3g was working before...i know 4g did work fine...and it still works weather im using the wimax setting on a sense rom or even before i rooted it....so somebody give me a run down of what to try...i read a lot of those suggestions...and to be totally honest...i have no idea what too do...like i said im kinda new to this whole thing
nevermind...i found the thread with the whole step by step process...thanks for your help guys...i got it up and running
Related
i have sense on my evo again because everywhere i went no matter my signal, the bars on cm6 showed 1-2 rarely 3 never 4 and the 3G was painfully slow. ran tests and i got .1 mbps on cm6, flashed sense to see if my phone was the problem and it got 1mbps, ten times faster? can anyone explain the potential problem here? its killing me cuz i love aosp but the 3G is killin me
Always had the same issue here. One of the reasons I stay on a sense based rom.
mic.mayorga said:
i have sense on my evo again because everywhere i went no matter my signal, the bars on cm6 showed 1-2 rarely 3 never 4 and the 3G was painfully slow. ran tests and i got .1 mbps on cm6, flashed sense to see if my phone was the problem and it got 1mbps, ten times faster? can anyone explain the potential problem here? its killing me cuz i love aosp but the 3G is killin me
Click to expand...
Click to collapse
Post in Q&A
And just a suggestion, install a senseless ROM... Built off sense but has sense removed... Will be the closest thing to AOSP but will keep your speeds and 4g working.
The signle meter on CM6 only has 4 bars, the Sense one has like 8. You are getting the same coverage.
Secondly, wrong forum. This is development.
Third. I have slow 3G on CM6 roms too. I have no idea why, and everyone else will tell you it's Sprint. But I can be in the same place, and run speedtests and Sense based ROMs are always faster.
Thread moved to Q&A.
Yup. Sense will always have better 3G signal. Sometimes when I am on CM the signal even drops down to 1x.
Thats irrelevant .. he also posted the speeds he was getting. OP, I don't know what's wrong; doesn't happen to me. Is it on all aosp roms? Try messing round with the settings
A drop of Chuck Norris's semen was placed on the IPhone. We now have the Htc Evo.
oops i thought i posted in q&a, my bad.
and i understand the whole bar ratio but on sense i get like 7 bars out of 8 rather than 1 out of 4. seriously it is almost ALWAYS 1 bar and it drops to 1x a lot! its never faster than about 125kb/s on a speedtest no matter where i am. its almost like theres a governor bogging it down
ALSO: ive flashed gingerbread roms galore, all the same issue.
On a AOSP rom the 4 bars are the 4 low bars outta the 6 in sense, so if u see only two bars then ur short 4 which gives u horrible battery. Also kernels play the biggest role in data if u want to believe it or not...
Sent from Point A to a Point B
mic.mayorga said:
oops i thought i posted in q&a, my bad.
and i understand the whole bar ratio but on sense i get like 7 bars out of 8 rather than 1 out of 4. seriously it is almost ALWAYS 1 bar and it drops to 1x a lot! its never faster than about 125kb/s on a speedtest no matter where i am. its almost like theres a governor bogging it down
ALSO: ive flashed gingerbread roms galore, all the same issue.
Click to expand...
Click to collapse
I had the same problem until I flashed a Sense rom, re-flashed the newest radio after first boot. Updated the profile then restarted the phone. I then could flash any AOSP rom with no speed problems. But every time i go back to a sense rom I must do that again if I want to go back to AOSP...
I don't know if it will work for you, but it did for me...
runningwarrior08 said:
I had the same problem until I flashed a Sense rom, re-flashed the newest radio after first boot. Updated the profile then restarted the phone. I then could flash any AOSP rom with no speed problems. But every time i go back to a sense rom I must do that again if I want to go back to AOSP...
I don't know if it will work for you, but it did for me...
Click to expand...
Click to collapse
thanks. i will try that right now actually.
Home>Menu>Settings>Wireless & networks>Mobile networks
Make sure "Data enabled", "International data roaming", and "National data roaming" are checked, and "System select" is on Automatic.
And before you freak out, all of the EVO plans on Sprint have unlimited roaming.
drmacinyasha said:
Home>Menu>Settings>Wireless & networks>Mobile networks
Make sure "Data enabled", "International data roaming", and "National data roaming" are checked, and "System select" is on Automatic.
And before you freak out, all of the EVO plans on Sprint have unlimited roaming.
Click to expand...
Click to collapse
hahahahaaha thanks i already know all that. and yes its all checked.
well it seems that the radio flash and updating the profile worked some magic. speeds are up above 700kbps
EDIT: nope. back to horrible speeds jk
can i get some feedback from more CM users please? this is so confusing
I had the same problem on cm6. Still don't understand why but I'm sticking with a sense rom. I get the best results on myns roms. Fresh was almost just as bad as cm6 as far as speeds go. Kinda weird imo. Maybe someone can explain?
Sent from my PC36100 using XDA App
If I had to guess, its due to the fact most sense based roms have the carrier spyware built in. (ksoftiq I think is the process name)
But, thats just a guess, I'm probably wrong.
I have the same issue with cm6 and the latest gb asop roms. Not with the display of the bars, but on asop roms only at my work I will bounce between 1x and 3g. I will lose data, then go to 1x, then back to 3g constantly. When holding, the signal isnt too bad, but it is almost as if the phone cannot pick between towers or something. I have tried multiple radio/pri combos and such and have no solution. Also tired switching back to sense and updated profile and prl.
Edit: Could it also be location based? This only happens at work in Burbank, CA. Just about everywhere else I am around LA I do not have this problem.
I suffered from this on cm. On gb I get great speeds for a while then it will act crazy and get slow. I reboot and it goes back to being fast again.
Sent from my PC36100 using Tapatalk
if u ever notice some of those extra processes running in the background of sense like IQRD or IQ agent for example... i believe some of those are qualcomm based programs that help ensure good data transfer speeds. And it's funny that we all hated sense because of those extra background processes that seem to slow the whole system down but some of them are actually helping to keep data speeds up in sense roms. Obviously in AOSP those processes are not present therefore speeds arent always as reliable and may drop in and out. Im just speculating on this and have no concrete proof but i did read up on one of the processes and it points to qualcomm's cdma based technology development so im assuming there is a correlation.
With all the excitement going on with the Wimax being alpha tested in the CM ROM it got me testing my data speeds the last few weeks.
From my understanding 3G speeds should be decent and range between 1 - 3 mbps down, and using Sprints 3G network I am not coming close to that.
I am using the SpeedTest.net app for my results, and I have read from some posts that the app might not be that accurate.
Here are the results that I have been seeing (displayed as Mbps) using the closest server to me (Random Lake, WI - even though other servers are giving me the same low scores):
1/6/11 - .18 down and .37 up
1/6/11 - .16 down and .30 up
1/2/11 - .30 down and .77 up
12/27/10 - .45 down and .27 up
12/27/10 - .34 down and .27 up
12/27/10 - .12 down and .20 up
12/24/10 - .45 down and .70 up
12/24/10 - .15 down and .62 up
As you can see, not close to the 1 - 3 range that I would expect. I am checking that the icon is showing 3G and 1X when doing the test as well. Here is some information to help deduct and (hopefully) solve my issue.
My EVO is from release day, not the 004 hardware
I'm running CM 6.1.1
CM stock kernal that comes with it - 2.6.35.9 [email protected] #1
Theme is Project_Bliss HD (modded by me to include some different emoticons and Batman themed notification shade)
I have flashed all of the latest
*Radio - 2.15.00.11.19
*Wimax - 27167_R01 (even though where I live has no 4G)
*PRI - 1.90_003
*NV - 1.90_003
I have flash a Sense ROM and update Profile and PRL
I live in Appleton, WI area if that matters at all.
So am I just looking at my results wrong? If I'm not, what are some solutions that I can look at to improve my 3G data speed? Any other test I should run or try?
Push come to shove I can always #blameshift!!
JasonK75 said:
With all the excitement going on with the Wimax being alpha tested in the CM ROM it got me testing my data speeds the last few weeks.
From my understanding 3G speeds should be decent and range between 1 - 3 mbps down, and using Sprints 3G network I am not coming close to that.
I am using the SpeedTest.net app for my results, and I have read from some posts that the app might not be that accurate.
Here are the results that I have been seeing (displayed as Mbps) using the closest server to me (Random Lake, WI - even though other servers are giving me the same low scores):
1/6/11 - .18 down and .37 up
1/6/11 - .16 down and .30 up
1/2/11 - .30 down and .77 up
12/27/10 - .45 down and .27 up
12/27/10 - .34 down and .27 up
12/27/10 - .12 down and .20 up
12/24/10 - .45 down and .70 up
12/24/10 - .15 down and .62 up
As you can see, not close to the 1 - 3 range that I would expect. I am checking that the icon is showing 3G and 1X when doing the test as well. Here is some information to help deduct and (hopefully) solve my issue.
My EVO is from release day, not the 004 hardware
I'm running CM 6.1.1
CM stock kernal that comes with it - 2.6.35.9 [email protected] #1
Theme is Project_Bliss HD (modded by me to include some different emoticons and Batman themed notification shade)
I have flashed all of the latest
*Radio - 2.15.00.11.19
*Wimax - 27167_R01 (even though where I live has no 4G)
*PRI - 1.90_003
*NV - 1.90_003
I have flash a Sense ROM and update Profile and PRL
I live in Appleton, WI area if that matters at all.
So am I just looking at my results wrong? If I'm not, what are some solutions that I can look at to improve my 3G data speed? Any other test I should run or try?
Push come to shove I can always #blameshift!!
Click to expand...
Click to collapse
i noticed this with a lot of people lately. ive started to notify a lot of people including cyanogen himself
mic.mayorga said:
i noticed this with a lot of people lately. ive started to notify a lot of people including cyanogen himself
Click to expand...
Click to collapse
Thanks for letting Cyanogen know that. So it sounds like I'm not alone in this?
Are you having any issues?
Sent from my EVO (CM6.1.1) using XDA App
A lot of those results look like they could be from when you were connected at 1x speeds. Sometimes it seems like the status bar icon doesn't update quickly for the change in network type. Also, how strong of signal do you have. If you're at the edge of data coverage, the rate might be low because a lot of packets are getting lost in transmission. Have you seen what your speeds look like in other locations? In my home town I regularly get over 2mb, but when I was traveling a few weeks ago in some places I could barely pull 300k.
I have check all over town since my apartment is further away and gets lower strenght. Im getting the same results close or far away from a tower.
Sent from my EVO (CM6.1.1) using XDA App
i started noticing this with my evo aswell, actually about yesterday, my stats are about the same in the OP, i live less then a mile from the 4g tower, i've even been about 200 yards away and gotten crappy 4g signal, anywhere from only 3-4 dl, and barely 1 ul.
Hopefully this helps. I was also experiencing 1x speeds although the phone indicated 3G. I upgraded to an EVO after modding my Hero for the past year. Thus I was pretty comfortable with rooting, installing roms, etc. within 24 hours of getting my EVO I decided to root it and try out some of the roms available.
Almost immediately after rooting using unrEVOked I noticed signiffigantly slower data speeds. (I'm not pointing any fingers, only documenting what led up to this) I first tried out the latest CM6 rom. Upon booting it indicated 1x speeds though posts that I read stated that you are actually recieving data at 3G speeds. I think that CM6 may actually be reporting the data connection accurately while the sense rom is not. Using speedtest.net's app (I know it dosen't report speeds accurately) I was consistently recieving between 80-160 kbs download and 60-100 kbs upload. I then downloaded the same app to my wifes unrooted EVO and ran a side by side comparison. Using the same server and within seconds of testing each her EVO was downloading at 800-1600 kbs download and 600-1000 kbs upload while mine was still recieving at the afore mentioned speeds. I tried updating PRL, profile, running the stock rom to no avail. I then tried RUU and unrooting without any change.
I was convinced that either Sprint was throttling my connection or the transmitter in the phone was defective or damaged. I was ready to return the phone to Radio Shack where I purchased it last week but I decided to call Sprint and inquire about the throttling issue first. Sprint assured me I was not being throttled and they also thought I may have a defective phone but they asked if I would perform a ##DATA# before returning it. Amazingly enough this worked and my data speeds have returned to 3G speeds of around 1000-1400 kbs download.
I'll detail the procedure but I make no guarantees this will work for anyone else. Also you'll need your MSL, there are guides that detail how to obtain this or you can all Sprint and ask nicely. Also I did this while stock and unrooted and I haven't tried to reobtain root again yet so if this works for you while rooted let me know. Finally I believe you'll have to perform this using the stock dialer as I don't believe that the CM dialer will work for this.
Procedure is as follows:
Open dialer and type ##3282#. (##DATA#)
You should now be taken to the epst prompt. Choose "Edit Mode"
You will now be asked for your password. This is your MSL
Next you want to choose "Data Profile"
While in Data Profile hit the "Menu" button at the bottom of the phone.
Next choose "Restore" and allow the phone to reprovision.
Let me know if this works if you try it while rooted as I'd like to reroot again but I'm a little gun shy now that it's fixed again.
I'll give that I try and see what happens. I have to flash a stock ROM first and hope that any changes follow me along back to CM ROM. I am also going to try the Wimax kernal to see if that helps since that ks reporting to be a possibility.
Sent from my EVO (CM 6.1.1) using XDA App
priceaw1 said:
Hopefully this helps. I was also experiencing 1x speeds although the phone indicated 3G. I upgraded to an EVO after modding my Hero for the past year. Thus I was pretty comfortable with rooting, installing roms, etc. within 24 hours of getting my EVO I decided to root it and try out some of the roms available.
Almost immediately after rooting using unrEVOked I noticed signiffigantly slower data speeds. (I'm not pointing any fingers, only documenting what led up to this) I first tried out the latest CM6 rom. Upon booting it indicated 1x speeds though posts that I read stated that you are actually recieving data at 3G speeds. I think that CM6 may actually be reporting the data connection accurately while the sense rom is not. Using speedtest.net's app (I know it dosen't report speeds accurately) I was consistently recieving between 80-160 kbs download and 60-100 kbs upload. I then downloaded the same app to my wifes unrooted EVO and ran a side by side comparison. Using the same server and within seconds of testing each her EVO was downloading at 800-1600 kbs download and 600-1000 kbs upload while mine was still recieving at the afore mentioned speeds. I tried updating PRL, profile, running the stock rom to no avail. I then tried RUU and unrooting without any change.
I was convinced that either Sprint was throttling my connection or the transmitter in the phone was defective or damaged. I was ready to return the phone to Radio Shack where I purchased it last week but I decided to call Sprint and inquire about the throttling issue first. Sprint assured me I was not being throttled and they also thought I may have a defective phone but they asked if I would perform a ##DATA# before returning it. Amazingly enough this worked and my data speeds have returned to 3G speeds of around 1000-1400 kbs download.
I'll detail the procedure but I make no guarantees this will work for anyone else. Also you'll need your MSL, there are guides that detail how to obtain this or you can all Sprint and ask nicely. Also I did this while stock and unrooted and I haven't tried to reobtain root again yet so if this works for you while rooted let me know. Finally I believe you'll have to perform this using the stock dialer as I don't believe that the CM dialer will work for this.
Procedure is as follows:
Open dialer and type ##3282#. (##DATA#)
You should now be taken to the epst prompt. Choose "Edit Mode"
You will now be asked for your password. This is your MSL
Next you want to choose "Data Profile"
While in Data Profile hit the "Menu" button at the bottom of the phone.
Next choose "Restore" and allow the phone to reprovision.
Let me know if this works if you try it while rooted as I'd like to reroot again but I'm a little gun shy now that it's fixed again.
Click to expand...
Click to collapse
this sorta helped me a bit, but i just also ended up flashing back to 1.77pri and nv, though i still have the latest wimax and radio and 60674prl on myn's rls5, however i'm still experiencing way below average data speeds as compared to what i used to, i have a release day evo with 0002 hardware, and .76 hboot, even my 4g's are slower then what they used to be.
FWIW, I experienced a drop in speed as well. I used to get 1-2 Mbps easy. Now all I get is around 500. Very strange.
detusueno said:
FWIW, I experienced a drop in speed as well. I used to get 1-2 Mbps easy. Now all I get is around 500. Very strange.
Click to expand...
Click to collapse
humm, something is ary here, possible throttling, or over crowded network?
tomh1979 said:
humm, something is ary here, possible throttling, or over crowded network?
Click to expand...
Click to collapse
I think with all the new phones sold over christmas the network is being hammered.
Sent from my PC36100 using XDA App
baknblack said:
I think with all the new phones sold over christmas the network is being hammered.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
i really hope your right, i mean the other day with cmWimax i nailed a 7.61, now i'm lucky if im even in the 3 range for moar gee's, lol, even with reg sense rom's i'm barely in 3 range as well, i have a tower that is only about 200 yards away that is 4g and it still suxor's.
I haven't had a chance to test the above, I'm about to start to do that.
I did try out Sprints Network Speed Test and got results from it above 1.0 finally. Then I tried using the speed test app and it was giving me location in Europo to test? This morning it is back to normal and both the speed test app and Sprints website both were giving the same results - around .80.
I'm going to flash the Wimax for CM and see if that helps out. If not, then I'm going to flash a Sense ROM and do the #DATA# trick listed above.
Here is the website for Sprints speed test website. You'll need the latest Flash installed from the market for it to work.
http://www6.sprint.com/landings/speedtest/?ECID=vanity:speedtest
JasonK75 said:
I haven't had a chance to test the above, I'm about to start to do that.
I did try out Sprints Network Speed Test and got results from it above 1.0 finally. Then I tried using the speed test app and it was giving me location in Europo to test? This morning it is back to normal and both the speed test app and Sprints website both were giving the same results - around .80.
I'm going to flash the Wimax for CM and see if that helps out. If not, then I'm going to flash a Sense ROM and do the #DATA# trick listed above.
Here is the website for Sprints speed test website. You'll need the latest Flash installed from the market for it to work.
http://www6.sprint.com/landings/speedtest/?ECID=vanity:speedtest
Click to expand...
Click to collapse
ok, so using the sprint site, i/m actually where i should be as before, back above 7 for 4g, not tested 3g yet, but working on it.
EDIT: wow, my 3g still blows, lol.
tomh1979 said:
ok, so using the sprint site, i/m actually where i should be as before, back above 7 for 4g, not tested 3g yet, but working on it.
EDIT: wow, my 3g still blows, lol.
Click to expand...
Click to collapse
Glad to hear that 4G is back to where it should be. Are you on a Sense or AOSP ROM like Cyanogen?
JasonK75 said:
Glad to hear that 4G is back to where it should be. Are you on a Sense or AOSP ROM like Cyanogen?
Click to expand...
Click to collapse
myn's rls5, so yeah back on sense right now, more stable to use for using both 3/4g.
tomh1979 said:
myn's rls5, so yeah back on sense right now, more stable to use for using both 3/4g.
Click to expand...
Click to collapse
Nothing wrong with that. I'm going to start my tests this afternoon.
Sent from my EVO (CM 6.1.1) using XDA App
JasonK75 said:
Nothing wrong with that. I'm going to start my tests this afternoon.
Sent from my EVO (CM 6.1.1) using XDA App
Click to expand...
Click to collapse
i have noticed though with this release of myn's that i do keep dropping 4g and reconnecting, something that i have never did before on other dev's rom's.
Well, both attempts to fix it didn't work. The new Wimax for CM didn't give me faster speed and the flashing to Sense ROM to do the ##DATA# didn't help either.
Anyone else have any ideas?
Rooted the phone and lost 3g. I still have data the data signal says 1x. Can't for the life of me figure this out. when I switch back to rooted stock 3G comes back. help?
You were probably on 1x the whole time. Sense lies and doesn't show 1x. It only shows 3g all the time, even when you're not actually on it. AOSP ROMs accurately portray what data you're on.
So I should probably try an aosp rom and see if it changes? it was really really slow everywhere we went. We have great 3G coverage here and it was turtle slow consistantly.
CM7 is AOSP. There's a change that your 3g isn't working properly, but when you were on sense, there was really now way to tell by looking at the signal what your data connection was. Only by how fast your internet was.
You can try doing a speed test, then in the same place, restore/flash a Sense ROM and test it again to be sure. CM7 and other AOSP can be finicky with data. If you find you actually should be getting better data exactly where you are, you can try doing a full wipe and reflashing CM7.
What version of CM7 are you using?
On a sense rom, try typing ##3282#
You will need your MSL - download MSL reader from the market.
Then pick data profile, push menu and hit restore.
this worked for me when I first got my EVO.
Good luck.
CM7 stable. Ill try the MSL trick, any version of a sense rom in particular this works on?
This is my first time doing anything on a sprint phone. My personal phone is on T-Mo. This is my roomates EVO. Everything up to this point has worked flawless, just this slooow data has me concerned.
Digitaldreamer7 said:
CM7 stable. Ill try the MSL trick, any version of a sense rom in particular this works on?
This is my first time doing anything on a sprint phone. My personal phone is on T-Mo. This is my roomates EVO. Everything up to this point has worked flawless, just this slooow data has me concerned.
Click to expand...
Click to collapse
Naw, it'll work on any sense rom, the ##3282#.
teh roxxorz said:
Naw, it'll work on any sense rom, the ##3282#.
Click to expand...
Click to collapse
It should on any sense that is based off the EVO rom. Ported roms like Warm Z or these new gingersense roms with sense 2.1 don't seem to work. Just slap on sprint lovers and then nandroid restore back to your AOSP rom.
Much thanks guys, I'll try all this when I can get longer with his phone lol.
Stuke00 said:
On a sense rom, try typing ##3282#
You will need your MSL - download MSL reader from the market.
Then pick data profile, push menu and hit restore.
this worked for me when I first got my EVO.
Good luck.
Click to expand...
Click to collapse
My god I can't believe I never tried this. Went from 100 kb/s to 600 kb/s, often hitting 900.
Still sub-par to other carriers, but so much better than before at least.
have you done the 3g speed tweak? Helps some people:
http://forum.xda-developers.com/showpost.php?p=11859422&postcount=3
jstalford said:
have you done the 3g speed tweak? Helps some people:
http://forum.xda-developers.com/showpost.php?p=11859422&postcount=3
Click to expand...
Click to collapse
will doing so make it much faster?
Some people see noticeable improvement.
jstalford said:
have you done the 3g speed tweak? Helps some people:
http://forum.xda-developers.com/showpost.php?p=11859422&postcount=3
Click to expand...
Click to collapse
jstalford said:
This only works on a sense rom, but download msl reader from the market and get your msl. Then in the dialer enter ##3282# and click edit mode. Enter your msl when it prompts you.
When the menu comes up, click a advanced. Scroll to the bottom and change the one that says 8085 to 0. Then change the one that says pd.vog.sprintpcs.com to 0.0.0.0
Originally posted by avalaunchmods in the dev section under 3g speed fix or something.
Click to expand...
Click to collapse
What exactly does this tweak do?
Update.
So I could not get sprint lovers to flash. I tried flashing both ways with both roms (full you flash from the bootloader and simple without radio from recovery) and it failed both times. I went ahead and flashed the rooted stock and tried the ##3282# and the dialer locked up.. home button worked, the pull down worked, the dialer didnt work. So i waited about 5 minutes and still no menu or pop up or anything like that. What am I doing wrong.
Edit: Speed test shows 0.5-0.7 down 0.5 was in my apartment 0.7 was out in the open in a known location to get great 3g signal.
try restoring it back to sense on clockwork mod. and do the tweak. after let the phone reboot. Let it do its hands free Activation. and afte that you shoul hav 3g on cm7. worked for me a few hours ago. i got 1.5 mbs in miami florida with 3 bars of 3g on cm7. very happy =]
hello forum..i been having a problem getting 3G on my evo i dont know what else to do i been looking online for fixes and no success so far (obviously) sometimes i get 3G for a few minutes other times it shows 3G but its greyed out but most of the time theres just no service at all...i am in a 3G area i can connect to 4G but very little (not really in my area) and i connect to wifi...im rooted but im on the stock sense rom till i figure this out..i called sprint and did a few resets but it didnt last after i hung up (of course) ...please help..any information would be appreciated
p.s. let me know if you need anymore info
Well, are you in an area where Sprint's 3g network is overloaded [therefore slow]?
The switches at the towers are set to send phones to 1x [to reduce the load] in times where it's necessary.
That sounds like it's what's happening to you.
Especially since you sometimes get 3g.
i wish it was but the other evos in this house have full 3g -__- im hoping perhaps theres a way to refresh or restart my 3g if thats even possible?
I don't how much help this would be but if you call Sprint they can send refresh signals to your phone. Maybe try that? Edit: Not sure if these are the resets your talking about.
Sent from my PC36100 using XDA App
beezo23 said:
i wish it was but the other evos in this house have full 3g -__- im hoping perhaps theres a way to refresh or restart my 3g if thats even possible?
Click to expand...
Click to collapse
You can turn the radio off and on via settings > wireless & networks > mobile networks > data enabled
It's important to note that, just because other phones are getting 3g and you're only sometimes getting it, it could still be the switches at the tower.
You can try updating your radio to the newest version.
http://forum.xda-developers.com/showthread.php?t=715485
Or wiping and reflashing/ruu your rom/kernel.
Sprint could also completely reset your line [on their end] and cause the phone to re-provision.
thank you i will definitely try this ...but how do i flash the radio? in recovery?
beezo23 said:
thank you i will definitely try this ...but how do i flash the radio? in recovery?
Click to expand...
Click to collapse
That is correct.
does it mean anything if i flashed the radio and it started loading and went to the main recovery part like like where it says reboot, install from sd, ect?
beezo23 said:
does it mean anything if i flashed the radio and it started loading and went to the main recovery part like like where it says reboot, install from sd, ect?
Click to expand...
Click to collapse
It just prepared it.
Now you have to restart the phone and it will go to a screen and you have to sit and wait for it to finish.
DO NOT TAKE THE BATTERY OUT.
It can take a few.
''/ still no luck...but thank you
Still need help...btw my battery is shot could this possibly be a culprit? my battery does last more then 3-4 hours
Let me first start by saying I am testing another Evo 4g as well as an Evo 3D at the same time next to each other. My phone gets around .3 everytime while the other phones receive .6-1.8 on avg. The Evo 3D is stock, unrooted and the other Evo 4G is running CM7 currently.
I was originally on CM7, then I tried 3G turbocharger script. Then I moved to MikG (currently running 3.1) and additionally tried ##3282# method, but it was already at all 0's when I first launched it on MikG.
I am looking to find out if anyone knows a specific area that I may have messed something up or some other way to fix this issue. It isn't fixed by AOSP/Sense, and the 3G turbocharger/##3282# method is not affecting my speeds.
Thanks in advance if anyone has any help to this. All I seem to find time and time again is the ##3282# method when I search, but my phone has had that as the default setting all along...
Welcome to Sprint, where unlimited 3g means you get dial-up speeds from 1998.
Does it say 1x or 3g?
i have had that problem before with the evo 4g it happens sometimes because sprint updates there PRL and Profile updates to connect too cell towers and with a lot of custom roms you cant update these things like on the official firmware.This causes loss of service in some areas and in some cases no service at all.
I live in a 4g area but when I get to a spot that it coverts to 3g I hate life....slow is a kind work for the speeds.....suck would be more appropriate
Yes, but like I was saying, the speeds on the phones next to me running custom CM7 and unrooted are both pulling in similar DL speeds that usually more than quadruple mine. I just can't figure out how to match theirs... I want to know what is different btwn our phones and where to find that information.
The only 2 options I see are trying to install the sprint based ROM and if that doesn't work, unroot my phone, try that, and next step would be to get them to trade it in...
I just hope there is a way I can change settings; it would save tons of time and effort.
Ok what is your current Dl speed? on the evo?
with that info i can probably find more ways to help you.
it ranges from .1-.4mbps on average. The other phones in the area achieve .6-1.8 or so... I spend a lot of time in the .27 range -sigh-
I am getting the new Ford Focus in a couple of weeks and I want to stream media to it while I drive, sooooo I would really like this resolved b4 my car arrives.
In that case i would reccomend,
flashing the evo back to stock sprint firmware and when you get done go to system update and update PRL and the Profile if that doesn't help let me know and we can try other options and if it does work you can put your custom firmware back on if you chose.
Updating the PRL and Profile in MikG doesn't work even though it looks the same and says it updated?
i actually just flashed a new rom today
it was the mikg kinged shooter 3d rom i was having problems myself so the best bet would go to stock because some features in mikg rom might not install those updates properly .
I will post back the results tonight or tomorrow when I get time. Thank you.
any time.
any questions feel free to ask
Last night i installed http://forum.xda-developers.com/showthread.php?t=1319881 and did the prl update and profile update. I nandroided back to MikG, and I don't think it helped. I will only know for sure on monday when I can test the other sprint phones next to mine.
At this point it is probably the hardware, right?