I have a xda2i and i downloaded the custom rom XDA-developers-SER-v12
and all i get is 2 error messege popups and i get it every time i try.. i even changed the usb device and 2 cradles.. if anyone has any advice i would be greatfull... also trying to unlock my xda2i its a great device just wish it was a great phone too.
Acid... also have included screen shots of the errors
Are you sure, that you have a XDA IIi? These ROM is just for the Wallaby (XDA I) device (Modell PW10).
If you have a Wallaby device, than your installed ROM prohibit flashing via EXE. You have to use SD-Card-flashing via Bootloader.....
Search the Forum and/or wiki, how to do this....
Stefan
hi!! you know if SER v1.2 run on Kaiser (TyTN II)? i try to install this on my htc but i get it error:
ERROR: GetDeviceData - No se puede encontrar el m¾dulo especificado.
error getting devicedata
this is a missing dll? you know if SER use a runtime DLL?
Hi guys, first post, but I've been lurking for a while.
I was updating my Radio form .05 to .08 using the DIAMIMG file and the reset with vol down and back key. It gets to about 80% and freezes. Now when I had to reset it goes to the red green blue and white screen and says:
"Upgrade Rom code error Please try again"
Serial
I have been unable to get a usb connection to the handset.
I think I'm all out of ideas and I have spent the last few hours trying to find a fix
just flash anything else like a os, etc.
I thinks it solves the problem.
It did for me btw.
i flashed org rom update with os and radio and it solved my problem.
the issue is the I can't get diamoncustomruu.exe to find my phone. windows need a qualcomm driver of some sort, although my Ubuntu system gets the hand set to show usb instead of serial, but wine cannout run diamoncustomruu.exe in a windows wrapper. Mayber I'll have better luck in vista instead of xp?
Zoom, would you be able to run through the process you went through to recover please, including the OS and what files you used?
At the minute I have Olinex 1.40 and Dutty 2.5 on here. It is somewhere between radio .05 and .08 lol.
Thanks for any help!
Ive just installed the Official rom update from htc site.
My screen was stuck in the three colored screen with update error but the rom update solved it.
I just run the official update from there (3colored screen).
And in some how it worked.
Then i reinstalled the custom os, radio etc.
btw i have Hardspl 1.93OliNex UnsignedEdition
Hope it will help you, it worked for me, maby not 4 u but if it does congratualtions
i got my diamond bricked no power at all in it no reset and hard reset is not working and cant get to bootloader has any one a solution thanx in advance
I can now get it to boot and show the following:
PSOC-Diam STAGE_PVT v0x32
Upgrade Rom code error
Please try again
USB
windows not detects the devide (i think)
when the phone is stuck in boot load ahev you tried:
1 - soft reset with red button by stylus?
2 - hard reset manually?
3 - turn phone off, plug in to usb, turn on does it still not recognise? reinstall activesync
4 - have you tried flashing radios, other roms, reflashing hard spl?
does your phone just not get recognised at all?
ive had this problem a few times not just with the diamond, and i alwasy managed to fix
also some roms have an option when you download and unpack to just run rom update, it enters mdos and goes straight to rom update, i.e. it doesnt have the on screen prompts, this may bypass the problem too - i think SWTOS or SWIFTfl roms are like this, or try an original rom
if you are really not getting any response try resets
thats about all the info i cazn offer.
last resort, have you insurance?
hackey100 said:
I can now get it to boot and show the following:
PSOC-Diam STAGE_PVT v0x32
Upgrade Rom code error
Please try again
USB
windows not detects the devide (i think)
Click to expand...
Click to collapse
try to reflash from there
when I try to reflash with .08 from Dutty's site i get error 260 Connection in the utility.
Should I try MTTY or QMAT and if so, can somebody point me in the direction of how to use these, and where to find them.
thanks for your help so far.
yeaaahhhhhh all fixed,god I hat Vista sometimes
see you all when I'm back on Ubuntu
Since you had it working in Linux (the USB) and you seem to preffereble wanna use Linux . There is a Google Project page with an HTC Flasher for Linux. Also there is a ROM Kitchen Project, among others
http://code.google.com/p/htc-flasher/w/list
hackey100 said:
yeaaahhhhhh all fixed,god I hat Vista sometimes
see you all when I'm back on Ubuntu
Click to expand...
Click to collapse
Maybe you'd like to share with everyone what you did to fix it, to help others?
All I did was run the RUU Upgrade Utility in Windows Vista. Because i was able to detect the USB device in XP but couldn't write to it, I thought that it may be driver related.
Vista detected the handset as a USB device correctly and I was able to flash it with a new radio and then Dutty's new ROM.
I tried minicom and HTCFLASH in Ubuntu and was able to detect the device, but when I tried to write a new rom the progress bar in Linux completed, but the phone didn't change.
It's all good now, I'm just happy it didin't break.
Im glad it worked 4 u =)
always nice 2 could help a little bit
Wow, now there's a headline:
XP FAILS, LINUX LIES. VISTA SAVES THE DAY!
Stop the press!
Tell your friends!
in fairness, it is a windows mobile device so I'm not entirely surprised!
Had the same probs few times with xp (activesync) with Vista everythin goes regulary Now I don´t use xp for flashing anymore
Ciao ragazzi,
vi scrivo per chiedervi aiuto, perché pure il mio Diamond è bloccato.
La situazione è questa: dovendo portare il Diamond (della 3) in assistenza, ripristinai tutto originale (ROM, Radio e HSPL). Poi ieri sera, ho avuto la brillante idea di ripersonalizzarmelo. Flasho l'HSPL 1.37 Olinex, e va tutto bene; flasho la ROM Min.74 Y2 v.2.2 FULL, e va tutto bene; flasho la Radio 1.17.25.09, e mi si bricka il Diamond, riportandomi il seguente messaggio:
DIAM100 64M
SPL-1.37.OliNex
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x32
Upgrade ROM code error
Please try again
Ho provato a fare un soft reset, niente;
Ho spento (togliendo la batteria) sperando che mi passasse da serial a USB, collegandolo al PC, niente;
Ho spento, collegato al PC e riacceso, niente, non va in modalità USB.
Il sistema operativo del mio PC è Windows 7 64bit; sul portatile ho XP: se accendo mentre è collegato al portatile, il portatile lo sente, ma non riesce a trovare i driver Qualcomm ecc.. ecc...
Insomma, ho il telefono bloccato e non so come uscire da questa situazione!
HELP!
--- --- ---
GOOGLE TRANSLATE
Hello guys,
I am writing to ask for help, because even my Diamond is locked.
The situation is this: having to carry the Diamond (of 3) in support, I restored all the original (ROM, Radio and HSPL). Then last night I had the bright idea of repersonalization. Flash the HSPL Olinex 1:37, and all is well, flash the ROM v.2.2 FULL Min.74 Y2, and all is well, flash the Radio 1.17.25.09, and I blocked the Diamond, returning the following message:
DIAM100 64M
SPL-1.37.OliNex
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x32
Upgrade ROM code error
Please try again
I tried to do a soft reset, nothing;
I turned off (by removing the battery) and hope that I might pass from serial to USB, PC connection, nothing;
I turned off, connected to the PC and turned on, nothing in USB mode.
The operating system on my PC is Windows 7 64bit, I have XP on the laptop: if I turn on while connected to the laptop, the laptop feels, but can not find drivers Qualcomm etc...
In short, I have the phone locked and I can not get out of this situation!
HELP!
Try to boot in bootloader mode the phone,and from there connect to usb and try to flash original radio
If you succed flash hard spl 1.40 or 1.93
I managed to get my hands on a couple of old Data Messenders, but I'm not having any luck upgrading the firmware on them. The Product ID for them is FA123T#ABA - I'm a newbie, so correct me if I'm wrong, but AFAIK that's basically something that describes the configuration - does it have a cam, how much memory, etc. - is that right? So if I can get an image from a unit with a different product ID, (HP site has updates, but nothing for a unit with my ID) do I risk bricking the unit, or is it more likely just that there might be something that doesn't work right? I'd come across a tool called Bootloader_GUI.exe on a PDA site that seemed to possibly be something that might work, it at least understands to look for *.nbf files, but it doesn't want to flash my phones. Any other tools out there that'd let me update my firmware? What I'm running does have some glitches (voice mail icon never dissapears despite getting the message) and if I'm not mistaken there's improvements for battery life.
Here's the version info from asset viewer:
Version
Product Revision Level :
ROM Date : 2008-08-03
ROM Revision : 0.30.15-484-WWE
Extended ROM Version :
OS Version : 6.1
Bootloader Version : 1757
XIP Version : 1.0.0.0
I've attached the whole thing as an attachment.
OK, now I'm even more motivated to get the ROM in these units upgraded - I was able to get TomTom running on a model with a newer ROM version (12/08) with the same setting that don't work on this one. If I can't tweek the product id to let the latest from hp on them, can anyone walk me through dumping the newer ROM to sd, and how to load it onto the older machines. I've googled looking for how to put the units into boot loader mode, no joy. Did find something for a USB composite mode here in the "iPAQ Data Messenger - Anyone working on a WM6.5 ROM" thread, I'll try it when I get home.
Help!!!
Still looking for a way to upgrade these units - I remember on some older iPaqs that you could start the upgrade without power plugged into the iPaq, then when it complained, swap some files, and plug in power, and the upgrade would complete - anyone know the details for how that works and if there's a way to use the same trick? I suppose it could connect using bluetooth, but I'm a bit leary of flashing via bt. Anyone? Bueler?
ayuda....
hola, oye tengo el mismo id de la hp ipaq data messenger pero quiero actualizarla y me pregunto si tu ya conseguiste eso, pues aun no encuentro la manera de ponerlo en modo bootloader sera k me puedes ayudar?
hello from puerto rico! i have a problem with mytouch slide with stereo jack! the problen is the signal is very very bad! and said in ocacions no service! i search in the web and i see some problems similar with radio out of update my phone is rooted and i need only instructions for made the update of the radio! and i have that radio update in my sd card 7.09.35.10 dor made the updte! ..my english is no perfect but i tried for understand
victorx said:
hello from puerto rico! i have a problem with mytouch slide with stereo jack! the problen is the signal is very very bad! and said in ocacions no service! i search in the web and i see some problems similar with radio out of update my phone is rooted and i need only instructions for made the update of the radio! and i have that radio update in my sd card 7.09.35.10 dor made the updte! ..my english is no perfect but i tried for understand
Click to expand...
Click to collapse
puede arrancar en la recuperación de reloj e instalar postal de SD.
Download the radio here:
http://www.mediafire.com/?p17q721zc5emzsq <--- I linked to the wrong one, the one I linked to will only work through fastboot (needs s-off). This you will flash through clockwork or ROM manager
and put it on your SD card (or push it through ADB if you know how to do that)
Run ROM manager and install it just like you would with a ROM.
gregb7677 said:
puede arrancar en la recuperación de reloj e instalar postal de SD.
Click to expand...
Click to collapse
ok me puedes dar los pasos! porfavor! para solo darle el update al radio
ok i haved files in zip in the folder
i have rom manager
but i dont know what is s-off
i think the instructions is
1.open rom manager
2.reboot into recovery
3.wipe data &factory reset
4.install from sdcard
5.choose new radio.
6and download
7.rebot system
is that true?
http://forum.xda-developers.com/showthread.php?t=923878 este es el nuevo radio desde 1/21/2011 habre rom manager y haz click donde dice reboot into recovery,despues escoger zip file desde sd card y escoje el nuevo radio,luego deja q instale y cuando acabe haz un reboot desde el menu de recovery.