Related
i see a lot of people who ask for the original htc rom. not the dopod or the softbank one..
i am asking everyone in the forum who has that device. please help and dump your rom for us.
my problem is that my device freeze on the windows mobile screen. its unlock and thats why i can't install a dopod rom. i cant open it beacuse it freezes and i can't confirm hard spl..
thanks guys..
halliva said:
i see a lot of people who ask for the original htc rom. not the dopod or the softbank one..
i am asking everyone in the forum who has that device. please help and dump your rom for us.
my problem is that my device freeze on the windows mobile screen. its unlock and thats why i can't install a dopod rom. i cant open it beacuse it freezes and i can't confirm hard spl..
thanks guys..
Click to expand...
Click to collapse
Follow my guide and use method 3. This will flash back a factory ROM, Dopod or whatever.
http://forum.xda-developers.com/showthread.php?t=540478
hello okkba
thanks for your help and your quick reply. i see that you help a lot of people around here so bless you.
i tried step 3 already.. the problem is that i don't have a "factory rom" that suitble for my device so i tried it with the dopod rom and i get an error cause my device isn't cid unlock. that's why i'm asking for the actual factory rom of htc.
halliva said:
hello okkba
thanks for your help and your quick reply. i see that you help a lot of people around here so bless you.
i tried step 3 already.. the problem is that i don't have a "factory rom" that suitble for my device so i tried it with the dopod rom and i get an error cause my device isn't cid unlock. that's why i'm asking for the actual factory rom of htc.
Click to expand...
Click to collapse
If you "Goldcard" or SuperCID the phone, you can flash ANY factory signed ROM, even the Dopod ROM. I did the same to my phone when I bricked it. Follow the steps closely and copy the RUU_Signed.nbh to the "Goldcard" as CACAIMG.nbh, insert the SD card, turn on the phone and enter bootloader.
hello again..
on the second stage you described:
"You will need a working Donor HTC device with a microSD slot and a microSD card that is smaller than 1GB (will be formatted) to create "goldcard" image using QMAT tools as described below "
maybe the problem is that i don't have a working htc donor device with the original software? the donor htc i have has cooked rom.. do i have to "goldcard" on an original software if the bricked htc isn't super cid?
cause i tried it again exactly as you say but i don't understand whats the problem..
halliva said:
hello again..
on the second stage you described:
"You will need a working Donor HTC device with a microSD slot and a microSD card that is smaller than 1GB (will be formatted) to create "goldcard" image using QMAT tools as described below "
maybe the problem is that i don't have a working htc donor device with the original software? the donor htc i have has cooked rom.. do i have to "goldcard" on an original software if the bricked htc isn't super cid?
cause i tried it again exactly as you say but i don't understand whats the problem..
Click to expand...
Click to collapse
It doesn't matter what OS, software, or device you use. As long as it's Windows Mobile. Cooked, factory, smoked, modded, doesn't matter. The point is to write the Goldcard image to the SD card. Thats all. nothing else matters.
ok.. i'll try again tomorrow and see if it works..
thanks for your patience..
ookba said:
If you "Goldcard" or SuperCID the phone, you can flash ANY factory signed ROM, even the Dopod ROM. I did the same to my phone when I bricked it. Follow the steps closely and copy the RUU_Signed.nbh to the "Goldcard" as CACAIMG.nbh, insert the SD card, turn on the phone and enter bootloader.
Click to expand...
Click to collapse
hello again okkba
i did exactlly as you told and it still didn't work. after i enter bootloader mode, i see on the screan "loading" and than "checking"
after that i see "not alow" with the number "00028002"
do you know what this error means?
can somebody help me in this situation??
halliva said:
can somebody help me in this situation??
Click to expand...
Click to collapse
Sounds weird. Where do u live? Send me the Cav and I'll try to fix it. ?
I tried to update it OTA and now my phone is hanging on HTC logo .
When I enter boot I get :
HBOOT-0.93.0001
RADIO-5.11.05.27
How can I revive it ?
Thanks !
Thanks to the great description i would say boot in to bootloader to see if you can do a factory reset, if you can't or it doesn't change anything run a RUU. You will lose all the data on the phone when doing so, sd is not affected as is all the stuff that is synced with google.
I tried factory reset . It doesn't change anything .
How can I run a RUU ? How to put it in RUU ?
PS : I don't care about tha data .
Ok i searched for 13 hours straight and finally found the solution...
You will have to make a gold card for it. Search on internet and you will get the procedure.
Then download the same RUU that you had in your mobile... like i had 2.29.405.5 and i could only restore on the same version.
Thats the only way in the world to solve it...
But it will happen again, because its basically edge that causes the problem. So you will either have to sale it or stop using 3G or edge :s
dewanusman said:
Ok i searched for 13 hours straight and finally found the solution...
You will have to make a gold card for it. Search on internet and you will get the procedure.
Then download the same RUU that you had in your mobile... like i had 2.29.405.5 and i could only restore on the same version.
Thats the only way in the world to solve it...
But it will happen again, because its basically edge that causes the problem. So you will either have to sale it or stop using 3G or edge :s
Click to expand...
Click to collapse
You dont need a gold card when you flash the original ruu, i.e. the Rom, that was installed out of the box. (branded/unbranded).
Try to boot your phone without sd-card. Did you flash a new rom? A A2SD rom without creating an ext-partition beforehand?
I don't know what version was before ...
Thank you for your patience !
Before you did the ota, did you flash a custom rom?
If yes, did you need a goldcard for that? If no, your phone is unbranded and you need to flash a wwe-ruu.
No , I didn't .
Can you link me , please , to that flash ?
Thanks !
here you go
http://forum.xda-developers.com/showthread.php?t=869048
I tried searching first and couldn't find anything, I've been running MIUI without any problems, but when I just restarted my phone it freezes at the bootloader and won't let me choose any options. If i put a pc36img on the sd card it reads it but doesn't give me any options to flash it..any help would be appreciated so I don't have to do a warranty claim.
help anyone? i cant take it in to a service center because i have s-off and i really don't want to spend another 100 to get a replacement
dw0783 said:
help anyone? i cant take it in to a service center because i have s-off and i really don't want to spend another 100 to get a replacement
Click to expand...
Click to collapse
Have you tried running a RUU?
well the pc36img one won't work because it freezes while reading it, and i can't find an exe ruu to download anywhere
edit...i found an exe but it requires the phone booted up..so neither will work
Make sure you have the latest image and check that the download wasn't corrupt (the md5 I think)
Sent from my PC36100 using Tapatalk
Hi
I´m in trouble with my Desire and need professional help.
It´s a (was a?) 093.0001 with root and s-off
I´ve installed Leedroid V3.07 (Gingerbread) incl. Custom HBoot for data++ and the Radio 32.56.00.32U_5.17.05.08
I´ve tried to flash it back to original by using the orig. 2.2 Stock Rom from HTC. As far as I know should this be enough to bring it back to original.
Now there is the following problem:
The update breaks with the message, I´ve got to use an other RUU. The phone hangs with a black screen and triangles in it.
I can not start it in BL mode. It hangs with a partition failure.
Is this a fullbrick or is there a way to fix it? Does the radio make this problems? How can i create a higher radio number to overflash it?
What woulda real specialist do now?
Thanks for help...
[email protected] said:
Hi
I´m in trouble with my Desire and need professional help.
It´s a (was a?) 093.0001 with root and s-off
I´ve installed Leedroid V3.07 (Gingerbread) incl. Custom HBoot for data++ and the Radio 32.56.00.32U_5.17.05.08
I´ve tried to flash it back to original by using the orig. 2.2 Stock Rom from HTC. As far as I know should this be enough to bring it back to original.
Now there is the following problem:
The update breaks with the message, I´ve got to use an other RUU. The phone hangs with a black screen and triangles in it.
I can not start it in BL mode. It hangs with a partition failure.
http://forum.xda-developers.com/showthread.php?t=695
Is this a fullbrick or is there a way to fix it? Does the radio make this problems? How can i create a higher radio number to overflash it?
What woulda real specialist do now?
Thanks for help...
Click to expand...
Click to collapse
Hi Patrick,
This happens usually with branded phones. In this thread you'll have to find the appropriate RUU, the RUU designed for your phone's original carrier. Did you make a goldcard ?
No, I did not make a goldcard.
I thought, Goldcard is not longer needed, so I dind´t make one...
But I´m a step closer (or did I make a sep back?)
I had acces via fastboot and tried to flash an other stock ROM via fastbootcommander...
Now I have the old HBOOT 0.93.0001 and my old radio. I´n not root anymore, and s-on is now printed in the display - but the flash stops with an partition failure again...
Is the partition failure the point to search for branded roms?
[email protected] said:
No, I did not make a goldcard.
I thought, Goldcard is not longer needed, so I dind´t make one...
But I´m a step closer (or did I make a sep back?)
I had acces via fastboot and tried to flash an other stock ROM via fastbootcommander...
Now I have the old HBOOT 0.93.0001 and my old radio. I´n not root anymore, and s-on is now printed in the display - but the flash stops with an partition failure again...
Is the partition failure the point to search for branded roms?
Click to expand...
Click to collapse
Do you have any idea if your phone is branded ?
No, I have no idea... bevore I start rooting i did not have seen any signs for a branding.
Mostly the desire shows an own startlogo from the carrier, isn´t it?
My problem is, the update is starting, but it aborts at ~50% with this failure...
All other updates won´t start, just this one RUU goes up to 50 percent...
[email protected] said:
No, I have no idea... bevore I start rooting i did not have seen any signs for a branding.
Mostly the desire shows an own startlogo from the carrier, isn´t it?
Click to expand...
Click to collapse
I didn't see any ROM for a German provider. Which RUU did you try to flash ?
paul.c said:
I didn't see any ROM for a German provider. Which RUU did you try to flash ?
Click to expand...
Click to collapse
I try this one:
RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00.32U_5.11.05.27_release_159811_signed
Is there a way to dump a firmware from a running desire?
[email protected] said:
I try this one:
RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00.32U_5.11.05.27_release_159811_signed
Is there a way to dump a firmware from a running desire?
Click to expand...
Click to collapse
I see. How does the error sound exactly ?
Maybe this RUU would help: http://shipped-roms.com/download.ph...io_32.30.00.28U_4.05.00.11_release_121684.exe
Edit: check this out: http://oxygenrom.com/viewtopic.php?f=5&t=190
Edit: this is a slightly older WWE RUU: http://shipped-roms.com/download.ph...9.00.32U_5.11.05.27_release_151783_signed.exe
this rom does nor work for me... I tried it a few times theis night...
The Error sounds [Error 131] - This Rom Update Utility can not update this Android Phone - Get the right ROM Update Utility Program and try again.
Sorry, I´m not very good in translating things, but Error 131 is the Problem for now...
Bevore this it told me there was a partition failure (step 6)...
[email protected] said:
this rom does nor work for me... I tried it a few times theis night...
The Error sounds [Error 131] - This Rom Update Utility can not update this Android Phone - Get the right ROM Update Utility Program and try again.
Sorry, I´m not very good in translating things, but Error 131 is the Problem for now...
Bevore this it told me there was a partition failure (step 6)...
Click to expand...
Click to collapse
Have you installed HTC Sync and drivers ?
I have installed the correct drivers, HTC Sync is not installed anymore...
I wonder that I have no access to my bootloader, just this black screen. But if I pull off the cable from my desire, i have the white bootloader screen, just without any entrys...
[email protected] said:
I have installed the correct drivers, HTC Sync is not installed anymore...
I wonder that I have no access to my bootloader, just this black screen. But if I pull off the cable from my desire, i have the white bootloader screen, just without any entrys...
Click to expand...
Click to collapse
You need HTC Sync. Start your phone in fastboot (back button + power), connect you phone and run RUU.
I´ve tried it a serval times, as admin, without admin rights, various combinations of rights and versions and have everytime the same problem...
I cann not see the phone starting in fastboot, even if I try to boot, the phone hangs with this black pic...
If I disconnect the cable from the phone I see the white page, but the last Entry is ruu, nothing more... there is nothing I can navigate to.
[email protected] said:
I´ve tried it a serval times, as admin, without admin rights, various combinations of rights and versions and have everytime the same problem...
I cann not see the phone starting in fastboot, even if I try to boot, the phone hangs with this black pic...
If I disconnect the cable from the phone I see the white page, but the last Entry is ruu, nothing more... there is nothing I can navigate to.
Click to expand...
Click to collapse
Try this: http://forum.xda-developers.com/showthread.php?t=921398&highlight=create+goldcard
Hey [email protected] . . 1st check if your pc is recognising your phone.
Connect to pc and check in device manager what is it showing.. should be adb or bootloader interface.. if not try to install adb driver...
than once its done.
try to run this RUU
http://shipped-roms.com/download.ph...9.00.32U_5.11.05.27_release_151783_signed.exe
basically error 131 is for CID.. so you will require a goldcard for that.. just try your luck .. remove both memory card and simcard.. and run the RUU..
Let us know the results
Allright everybody - It works! Feels like birthday @ christmas together, including a final blowjob and a cold beer togeter
What did I do? I´ve created a new goldcard on a second desire, used this card and started the final RUU again - That was all... Little think, big Impression
I thought all the time, the goldcard was specific for the telephone, but it was specially for the memory card.
Thanks a lot for all of your help! I know, there were many help for this stupid guy
But you all have saved the live of my desire... Thanks
[email protected] said:
Allright everybody - It works! Feels like birthday @ christmas together, including a final blowjob and a cold beer togeter
What did I do? I´ve created a new goldcard on a second desire, used this card and started the final RUU again - That was all... Little think, big Impression
I thought all the time, the goldcard was specific for the telephone, but it was specially for the memory card.
Thanks a lot for all of your help! I know, there were many help for this stupid guy
But you all have saved the live of my desire... Thanks
Click to expand...
Click to collapse
I'm glad for you. This is how you learn, stupidity has nothing to do with it.
paul.c said:
I'm glad for you. This is how you learn, stupidity has nothing to do with it.
Click to expand...
Click to collapse
Yes, you´re right... I´ve tryes a lot, I´ve learned even more tonight...
OK, second shot - I´m going to root & s-off my phone again...
[email protected] said:
Yes, you´re right... I´ve tryes a lot, I´ve learned even more tonight...
OK, second shot - I´m going to root & s-off my phone again...
Click to expand...
Click to collapse
Don't forget your glodcard. Keep it safe.
Hey ,
I have HTC Desire
When I turn on my phone I got this message Process Acore has stopped also Nothing work exapt botton
I instal some Officiel RUU but all of them didnt Work
Also I use PB99IMG.ZIP but the same problem
Could you please Help me
Thanks so much
YassineTad said:
Hey ,
I have HTC Desire
When I turn on my phone I got this message Process Acore has stopped also Nothing work exapt botton
I instal some Officiel RUU but all of them didnt Work
Also I use PB99IMG.ZIP but the same problem
Could you please Help me
Thanks so much
Click to expand...
Click to collapse
Help plz
Bortak's troubleshooting guide, stickied to the top of Q&A
You'll likely need to use the 2.3.3 RUU, you can also find it in PB99IMG.zip format from users here.
eddiehk6 said:
Bortak's troubleshooting guide, stickied to the top of Q&A
You'll likely need to use the 2.3.3 RUU, you can also find it in PB99IMG.zip format from users here.
Click to expand...
Click to collapse
That didnt Work bro still the same problem
You need to give more information: "that didn't work" or "all of them didn't work" isn't good enough to help us troubleshoot the problem....
- How are you trying to install the RUUs? Are you plugging them in and running them? Or using PB99IMG.zip method, does it find the zip file when booted into bootloader?
- Did the RUU fail to install? Did it come up with any error messages? If so could you tell us...
- Did the RUU install, can you boot into your phone and use it, but still getting the "process.acore has stopped" error?
Also it's useful to know your ultimate aim: are you going to sell the phone after RUU, or continue to use it?
Was your phone previously rooted? Do you want another ROM (obviously without the error). Why didn't you backup and try a different ROM? RUU tends to be last resort...
The more details you tell us, the more it becomes easier to help...
eddiehk6 said:
You need to give more information: "that didn't work" or "all of them didn't work" isn't good enough to help us troubleshoot the problem....
- How are you trying to install the RUUs? Are you plugging them in and running them? Or using PB99IMG.zip method, does it find the zip file when booted into bootloader?
- Did the RUU fail to install? Did it come up with any error messages? If so could you tell us...
- Did the RUU install, can you boot into your phone and use it, but still getting the "process.acore has stopped" error?
Also it's useful to know your ultimate aim: are you going to sell the phone after RUU, or continue to use it?
Was your phone previously rooted? Do you want another ROM (obviously without the error). Why didn't you backup and try a different ROM? RUU tends to be last resort...
The more details you tell us, the more it becomes easier to help...
Click to expand...
Click to collapse
Yeah Brother I use Ruu and succed instal and also the other zip file succed instal
And still the same problem
YassineTad said:
Yeah Brother I use Ruu and succed instal and also the other zip file succed instal
And still the same problem
Click to expand...
Click to collapse
Still not quite answering many of my questions..
So the 2.3.3 RUU successfully installed, did you restart the phone and does it get past the first screen?
Do you try to use the phone normally, but the Process.Acore error keeps constantly appearing?
eddiehk6 said:
Still not quite answering many of my questions..
So the 2.3.3 RUU successfully installed, did you restart the phone and does it get past the first screen?
Do you try to use the phone normally, but the Process.Acore error keeps constantly appearing?
Click to expand...
Click to collapse
Yeah successfully installed but didnt work still the same problem
I wanna change the wall system