Related
Hi guys. I have installed loads of ROMs onto my trusty hermes yet today, when trying to flash DuttyThroys Ultra Ultra Lite rom this happened: i downloaded ROM and installed it, it seemed to install fine, got to 100% and then came up with error message stating that Image File was corrupt. Now my hermes is stuck on the multicoloured bootloader screen?!?!?!? I have SPL 2.10. Hard SPL V7 HERM 100 IPL 1.04 (Dont know which of these is relevant to anythin?) .I have read the WIKI on repairing bricks but for my problem it says to reflash any nbh without radio. How is this possible if i cant get my pc to connect to my hermes???
Tried the method of turning off usb connection in active sync, removing battery, reconnecting to usb and running mitty (command SET 14 0) but nothing happens. Mitty says CMD error and active sync doesnt reopen the connection like the guide says! Man i hate this cuz i have now become one of those annoying noobs who has bricked their phone and hassles everyone for help!!!!
Have also tried to flash from sd card but nothing happens, flicks to white screen with LOADING... on it for 2 secons then flicks back to that wonderful multicoloured screen of joy!
Any help will be appreciated guys, cant live without my hermes!!!
Welcome to the fuc... nightmare world of the brick,i'mma in your same situation,now my Tytn is a piece of white stone,and it seems there's no reason to bring it back to live!
I can't stay without my Tytn i do a lot of things with it,Skype,SIP calls,Mail,Messenger,Memo,Internet......i'm in totally despair!!!
you should be able to just reflash a known good rom.
hfam95 said:
you should be able to just reflash a known good rom.
Click to expand...
Click to collapse
Brilliant story! both compelling and rich. But i have already explained that my pc doesnt recognise my hermes so how do you RECOMMEND i flash??
IT could be interesting to make the minimal effort to go and read the wiki.
anyway:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
Better than just cry.
MarcWhittle said:
Brilliant story! both compelling and rich. But i have already explained that my pc doesnt recognise my hermes so how do you RECOMMEND i flash??
Click to expand...
Click to collapse
With the microsd card...
right, its looking good. managed to begin flashing (bar has stopped for ages but having read this is normal im not so scared!) using the SD method. Where my device wasnt superCID i had to use the matching ROM (Orange) to my CID (which incidently i dont know, just downloaded both Orange ROMs).
While im waiting ill try and help you TETSUO! (Im a noob so probably cant!)
Is your device SuperCID??? tell me as much as you can about your device SPL etc
dude, if u read my post u would have seen that i have tried SD method once (sing Black 3.5 not ORANGE ROM), im not crying and im grateful for any help but when i get advice such as 'flash a rom' im gonna be pissed!
And i have read ALL the page on unbricking!!!
It worked!!
One more question, as i have installed a stock Orange ROM do i now need to reinstall HardSPL v7??
Are you on a Win XP or a Vista PC?
XP dude, sorry should have said! and thanks
i went into bootloader, still says 2.10 olipro but when i try to update to new ROM (Black X RC)and pick autodetect it says it says unknown version, use SSPL. it never used to say this so i assume i need to install HardSPL 7 again???
with the tri colour sceen, when you plug the usb cable in does it go from serial to USB ?
what OS have you got ?
just my 2 cents hope it helps.
dude, i have got past that problem and have managed to install an Orange ROM onto it. i only need to know ow whether to install HardSPL v7 again!
sorry slooooooooooooooooow typing
good question hope there an answer,
MarcWhittle said:
dude, i have got past that problem and have managed to install an Orange ROM onto it. i only need to know ow whether to install HardSPL v7 again!
Click to expand...
Click to collapse
just saw your post if ur device is hardspl you just need to supercid your device, If your spl is still showing hardspl and its coming as a error that normally happens to me as well just manually click spl 2.10 and tick (is it hardspl?}
To recap, i have now managed to flash a stock Orange ROM from SD card ( i think the reason it didnt work first time with SD is because device isnt SuperCID and i was trying to flash Black RC, soon as i used Orange ROM (my device is M3100) it worked. I am now back to a fully operational device. I wish to go back to Black but when i AutoDetect what bootloader i have it recommeds SSPL method. Before all my problems it would always automatically pick 2.10?? Does this mean i need to install HardSPL v7 again??
it was HardSPL v7 before all these problems, but im a noob so dont know if it still is?? would installing Orange ROM from SD Card remove HardSPL?? Bootloader still shows SPL as 2.10 oli
MarcWhittle said:
it was HardSPL v7 before all these problems, but im a noob so dont know if it still is?? would installing Orange ROM from SD Card remove HardSPL?? Bootloader still shows SPL as 2.10 oli
Click to expand...
Click to collapse
If you only flash the orange os.nb only then your hardspl wouldnt have changed so its safe to flash your device just manually choose.
If you want to flash hardspl again then do it on a precaution method
Mark,
First of all well done for getting yourself out of a hole. It seems quite difficult to ask for help these days without being shot to pieces even when you have first tried to help yourself by doing all the right things, which is more than can be said for some who come on here asking for help. So well done again.
Re your question, I would reflash Hard SPL anyway to be sure; however before you do that go to the Mr Vanx's guide on hard SPL (forgot the link but type in www.mrvanx.org and you should be taken there) and follow his instructions.
Good luck.
WB
Hi there. i just rebooted my HTC TYTN and it cant boot up. i get a screen whit 4 colours (red,green,blue and white) and at the top it say this. HERM200 IPL-1.04 and HERM200 SPL-2.03 and then at the bottom it say Serial/USB.
Can you please point me in the right direction to fix this?
xatazch said:
Hi there. i just rebooted my HTC TYTN and it cant boot up. i get a screen whit 4 colours (red,green,blue and white) and at the top it say this. HERM200 IPL-1.04 and HERM200 SPL-2.03 and then at the bottom it say Serial/USB.
Can you please point me in the right direction to fix this?
Click to expand...
Click to collapse
Your in bootloader mode, if you want to flash your original shipped rom, or a cooked rom, see my FAQ (in my sig), all you need to do is plug your phone into your computer, and run the RRU (rom upgrade utility)
veyka said:
Your in bootloader mode, if you want to flash your original shipped rom, or a cooked rom, see my FAQ (in my sig), all you need to do is plug your phone into your computer, and run the RRU (rom upgrade utility)
Click to expand...
Click to collapse
If he can't pass the bootloader, I believe it's safer to try the SD Card flash...
Cheers.
Kevlar-Source said:
If he can't pass the bootloader, I believe it's safer to try the SD Card flash...
Cheers.
Click to expand...
Click to collapse
I have got stuck in bootloader quite a few times over the past few days, to many flashes.
But, yeh, SD card is probs safer
if i download this http://forum.xda-developers.com/showthread.php?t=387990
ANd install it then everything will work again ?
You can't use the sd card method without having Hard SPL on your phone 1st. It just throws up an error message...
xatazch will have to flash a shipped rom then put Hard SPL on the phone.
Cheers...
How do i find a good rom for me? i am going to try to develop .net apps for my wm6 phone. any good advice ?
xatazch said:
How do i find a good rom for me? i am going to try to develop .net apps for my wm6 phone. any good advice ?
Click to expand...
Click to collapse
Depends what your looking for, I have benchmarks on almost all of the roms out atm (doing CRC's12.11 atm and there a lot faster than 12.10), see my sig.
i dont have a sd card right now so i have to use the usb cable. can u please send me the link to the one i need to download?
Current development Version Downloads: Release 12.11:Normal
so if i use this one then?
on my phone it say SPL-2.03 and in your ruu it say SPL-2.02/2.10/2.30 NEW bootloader. is that the one i should use when i install ?
sorry for all the questions. butt in new att all of this =P
ok. what i understand is that i have do have HARD-SPL on my device. i have downloded Hard-SPL-V7 here is the thing. it say that i have to have the device connected to activesync. but i cant do that. my phone dont start up. how do i upgrade my SPL with no sd card and no usb connection to activesync?
Where can i find the original wm 6?
xatazch said:
sorry for all the questions. butt in new att all of this =P
ok. what i understand is that i have do have HARD-SPL on my device. i have downloded Hard-SPL-V7 here is the thing. it say that i have to have the device connected to activesync. but i cant do that. my phone dont start up. how do i upgrade my SPL with no sd card and no usb connection to activesync?
Where can i find the original wm 6?
Click to expand...
Click to collapse
What's the point of having a WIKI, all these volunteers have developed this site for what?
Hi there i am following this guide
http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
And when i try to update my SPL i get a screen that is saying Loading..... and then "00068002" popup in red and the Loading stops. i have used a 2 gb MicroSd memory for this.
Did you format your SD Card in Fat32?
YES
Check SD card for file errors?
yes i did (Properties->Tools->Error Checking)
i have Read this link to and it dont help me in anyway.
Please help and dont say RTFM or something like that. i dont know where to look anymore.
xatazch said:
Hi there i am following this guide
http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
And when i try to update my SPL i get a screen that is saying Loading..... and then "00068002" popup in red and the Loading stops. i have used a 2 gb MicroSd memory for this.
Did you format your SD Card in Fat32?
YES
Check SD card for file errors?
yes i did (Properties->Tools->Error Checking)
i have Read this link to and it dont help me in anyway.
Please help and dont say RTFM or something like that. i dont know where to look anymore.
Click to expand...
Click to collapse
You cant do SD card flashing without HardSPL, put your phone into bootloader mode and flash hard SPL via Activesync, or you can just flash you carriers shipped rom without flashing hard SPL, see the wiki/my FAQ
Put again:
If you want to flash COOKEd roms you need to flash HardSPL via ACTIVESYNC.
If you want to flash a NON COOKED rom look on the WIKI for "shipped" roms, and get the right one for your phone, stick your phone into bootloader, and run the RRU
But i have a problem there. activesynk dont find the htc tytn. i have tryid to install HTC_TyTN_SVE_3.54.263.2_102_6275_1.47.00.10_108.exe and it show that it is getting installed on the htc but when it get to 100% and i try to use the htc it is the same way.
4 colours (red,green,blue and white) and at the top it say this. HERM200 IPL-1.04 and HERM200 SPL-2.03
how do i do it if activsynd dont register that i have the htc connected?
xatazch said:
But i have a problem there. activesynk dont find the htc tytn. i have tryid to install HTC_TyTN_SVE_3.54.263.2_102_6275_1.47.00.10_108.exe and it show that it is getting installed on the htc but when it get to 100% and i try to use the htc it is the same way.
4 colours (red,green,blue and white) and at the top it say this. HERM200 IPL-1.04 and HERM200 SPL-2.03
how do i do it if activsynd dont register that i have the htc connected?
Click to expand...
Click to collapse
Have you tried hard resting?
"Soft reset: Use the stylus to lightly press and hold the RESET button on the bottom of your device."
If not, put it into bootloader using this:
"Bootloader mode: Hold side OK and POWER buttons together and reset with stylus."
IF this doesnt work, and you cant connect to the pc, use the SD card method to flash the HTC rom.
sorry for this question. but the only one i find is exe files. where do i find "shipped" roms that are .nbh so i can install it with my SD ?
xatazch said:
sorry for this question. but the only one i find is exe files. where do i find "shipped" roms that are .nbh so i can install it with my SD ?
Click to expand...
Click to collapse
Download and install this ROM. http://rapidshare.com/files/46467733/HTC_TyTN_WWE_3.54.255.3_6275_1.48.00.10_108.exe You can start from here. If your phone doesnt sync put into bootloader mode.
xatazch said:
sorry for this question. but the only one i find is exe files. where do i find "shipped" roms that are .nbh so i can install it with my SD ?
Click to expand...
Click to collapse
Extract the file with winrar or winzip, there will be a .nbh in there somewhere
Due to a hardware problem in my Diamond I needed to restore it to manufacturer default. I didn't find a guide to this and since I've done the research anyway I thought I'd put together this little tutorial as the information was somewhat scattered around the forum. I hope this guide will be of use for the community.
My phone was originally branded and sim-locked by 3. After I was through with it, it was SIM-unlocked, security unlocked and had HSPL, custom ROM and a radio ported from another device. The steps below is what I did to restore it to stock. All steps might not be neccessary for you. This procedure might also work for other devices than the Diamond, but of course you need other versions of SPL, ROM etc.
1. Backup everything on your phone to your computer - use activesync, PIMbackup etc and make a copy of your Internal Storage.
2. Make a hard reset (hold vol down + enter and soft reset) and chose to format moviNAND. This step is only neccessary if you want to wipe your Internal Storage before you send the device in for repair, but I recommend it.
3. Go to www.htc.com and download the latest stock ROM (includes stock radio and SPL). You find it under Support and you enter your s/n to get the correct stock ROM for your device, complete with branding for your operator. You can also find stock ROMS here: http://forum.xda-developers.com/showthread.php?t=471699
4. Flash the stock ROM. Now you have stock ROM and Radio on your device. Stock SPL will not be installed until you've replaced HSPL with an older stock SPL and flashed ROM again.
5. Get RUU-SSPL and stock SPL from HERE:
http://forum.xda-developers.com/showpost.php?p=2324829&postcount=39. I used the stock 1.93 SPL. Some instructions and info about restoring stock SPL is in the linked post by cmonex and due credit goes to her. I will repeat some of that info to keep this guide step-by-step. EDIT: Stock SPL 2.03 can be found here: http://forum.xda-developers.com/showpost.php?p=3359191&postcount=390
6. Put the .nbh file from the SPL you downloaded into the same folder as the extracted contents of RUU-SSPL-withoutNBH.zip and run the RUU. This flashes an old stock SPL.
7. Flash your stock ROM from step 3 again. This step is neccessary to get the correct stock SPL on your device, eg. the one that corresponds with the stock ROM you've downloaded in step 3. It was not installed in step 4, because then you still had HSPL. In step 6 you've installed a stock SPL and now the correct stock SPL will flash along with the stock ROM. After this step I got SPL 2.03 on my Diamond.
8. Remove the Security Unlock from your device using the instructions and Security Relocker by Olinex from this post by cmonex: http://forum.xda-developers.com/showpost.php?p=3299516&postcount=492
Now, my Diamond is still SIM-unlocked. I have not managed to find any info about how to restore the SIM-lock, but it is hopefully not neccessary for warranty. As far as I can tell, the unlock doesn't show anywhere, but of course all they need to do is to try a SIM-card from another operator...
If anyone has info about how to restore SIM-lock, then I'll update this guide with that info.
good job...
moderator make this "sticky"
3dward87 said:
good job...
moderator make this "sticky"
Click to expand...
Click to collapse
I second that, it contains links to stock ROMs, that'll hopefully stop a million topics about it lol.
This does not work for me.. However i have a problem. the touch screen of my device is not working.. so i can't get pass the allign screen part .. and for somereason the ruu won't connect to phone when it is at tha part so i can't install the spl.. the only way i can do that i through bootloader and it flashes fine but when i then look in bootloader to see the spl it still shows 1.40 olinex..
Da9L said:
This does not work for me.. However i have a problem. the touch screen of my device is not working.. so i can't get pass the allign screen part .. and for somereason the ruu won't connect to phone when it is at tha part so i can't install the spl.. the only way i can do that i through bootloader and it flashes fine but when i then look in bootloader to see the spl it still shows 1.40 olinex..
Click to expand...
Click to collapse
You're right, I tried it too. Flashing SPL through bootloader doesn't work.
You can try using JumpSPL instead, I've attached it in this post. I don't think JumpSPL will require any screen prompts on your Diamond. You can read instructions.txt in the zip, but it's just really the .bat file so you get an idea of what it's doing. Run the .bat, press enter at the prompts and run the RUU for your stock SPL instead of HSPL when asked. At your own risk, I have not tried this myself.
where can i read more information about jumpspl, how it works and everything?
eranyanay said:
where can i read more information about jumpspl, how it works and everything?
Click to expand...
Click to collapse
Look in the Xda-wiki, search and google, and not just in the Diamond section.
sticky please
this needs to be a sticky topic.
losdrivare said:
You're right, I tried it too. Flashing SPL through bootloader doesn't work.
You can try using JumpSPL instead, I've attached it in this post. I don't think JumpSPL will require any screen prompts on your Diamond. You can read instructions.txt in the zip, but it's just really the .bat file so you get an idea of what it's doing. Run the .bat, press enter at the prompts and run the RUU for your stock SPL instead of HSPL when asked. At your own risk, I have not tried this myself.
Click to expand...
Click to collapse
I have just tried it and it gets stuck where it should run the JumpSPL.exe on the device. After a few minutes it comes with an error:
"ERROR: CreateProcess failed with Errorcode = 30123
- UNKNOWNERROR: 0x000075ab"
This is not good I just think its wierd that because of a broken screen it is impossible for me to get the stock spl flashed back on.
Da9L said:
I have just tried it and it gets stuck where it should run the JumpSPL.exe on the device. After a few minutes it comes with an error:
"ERROR: CreateProcess failed with Errorcode = 30123
- UNKNOWNERROR: 0x000075ab"
This is not good I just think its wierd that because of a broken screen it is impossible for me to get the stock spl flashed back on.
Click to expand...
Click to collapse
Sorry to hear it and I'm afraid I'm out of ideas. After all, my little tutorial is primarily aimed at those whose Diamonds have working screens...
On another note, my Diamond came back from warranty repair and the repair shop had not noticed anything that would void my warranty. In the meantime I got myself a Topaz and now I've sold my Diamond, but I'll be checking this thread from time to time.
Hey thanks bro..!! I need to give mine for reparing..
I have a hardware problem with the reset button.. Do you think I should flash my diamond back to stock? (I don't think they'll check the software right?)
donsalari said:
Hey thanks bro..!! I need to give mine for reparing..
I have a hardware problem with the reset button.. Do you think I should flash my diamond back to stock? (I don't think they'll check the software right?)
Click to expand...
Click to collapse
I would restore it to stock anyway. Some workshops actually look for excuses/reasons why the warranty won't apply so I say you'd definitly be taking a risk if you didn't.
losdrivare said:
I would restore it to stock anyway. Some workshops actually look for excuses/reasons why the warranty won't apply so I say you'd definitly be taking a risk if you didn't.
Click to expand...
Click to collapse
Very true!!! Ok cool... Flashing back to stock!!
Thanks..
Damn.. Hmm anyway then i will have to try the risk and sending it in with hardspl on it.. ! I Hope they won't see it.
Da9L said:
Damn.. Hmm anyway then i will have to try the risk and sending it in with hardspl on it.. ! I Hope they won't see it.
Click to expand...
Click to collapse
Another idea: maybe you can find some a VNC program that also works the "other way" with windows mobile, so that you can get a window on your PC with the screen of your device?
Hi. I'm an orange user and i dont know what SPL i should use to send back to warranty!
DOes anyone can recommend it please?
My Orange ROM is RUU_Diamond_HTC_WWE_1.93.405.1_Radio_Signed_Diamon d_52.29.25.12_1.00.25.05_Ship
UPDATE - i flashed the new rom and i tried to put the original SPL, however it still showing 1.40 Olinex in the bootloader and it still says security unlocked.
Any help please...
Hi I m singapore user i dont know what is the original spl 1.23 ??? i 4get leh can u tell me
bro i try 1.23.000 that version are u sure this is offical stockspl
as i remember it shld be SSPL not SPL somemore when running the tri-boot colour is diffferent from the offical 1
1 . Press volume up restore factory default bla bla bla ..
2 . Press volume down restore factory default and format the internal storage
3 . Press any button to cancel
Where is 2 n 3 ??? gone oridi
herpez said:
Hi. I'm an orange user and i dont know what SPL i should use to send back to warranty!
DOes anyone can recommend it please?
My Orange ROM is RUU_Diamond_HTC_WWE_1.93.405.1_Radio_Signed_Diamon d_52.29.25.12_1.00.25.05_Ship
UPDATE - i flashed the new rom and i tried to put the original SPL, however it still showing 1.40 Olinex in the bootloader and it still says security unlocked.
Any help please...
Click to expand...
Click to collapse
k3nnyboiboi said:
Hi I m singapore user i dont know what is the original spl 1.23 ??? i 4get leh can u tell me
Click to expand...
Click to collapse
If you manage to install ANY stock SPL and then flash the correct ROM for your country and operator then you automatically get the correct SPL too, since stock ROMs include SPL. If you go to htc.com and type in your s/n then you automatically get the latest ROM for your device and operator.
k3nnyboiboi said:
bro i try 1.23.000 that version are u sure this is offical stockspl
as i remember it shld be SSPL not SPL somemore when running the tri-boot colour is diffferent from the offical 1
1 . Press volume up restore factory default bla bla bla ..
2 . Press volume down restore factory default and format the internal storage
3 . Press any button to cancel
Where is 2 n 3 ??? gone oridi
Click to expand...
Click to collapse
I only link to the SPLs provided by olipro and cmonex in the hard-SPL thread. If you need closer info about SPLs I suggest you ask there. I only tried to revert back to stock SPL 1.93 myself and it worked just like described in first post.
Thanks Op
Managed to restore it no problem, but took ages
Hi all,
How to upgrade rom via bootlaoader menu (after pressing the camera and hardreset)? If it's possible could you tell me which ROM i can use to upgrade a HTC advantage x7500/ATHENA-C9 with these info on bootloader menu:
ATHE100
IPL-v1. 00
ATHE100
SPL-v1. 07. 0000
Thanks for help!
Hi marius
I read your other post today and seeing no one else has replied , I will try to help you.
Have you tried a hard reset ?
If you have and had no luck , try to find an original shipped rom consistent with your spl and flash while in bootloader .
Don't try to flash any of the doctored roms, either spl 1.2 or 3.5 as you will not be able.
It is a long time since I have used the unlocker but I think if you read through the later posts , the authors used a wrapper program that requires an initial activesync connection to work.
I will look in here occasionally to see if you get it sorted or you can pm me if you have a question.
regards michael
Hello Lakeman,
if i write you it's because i read your reply below and i'm very happy.
1rst, i tried hard reset but it didn't work.
In fact, here is my story:
My HTC x7500 crashes after startup so i can't use it but when i tried to flash it i received the error 294:Invalid Vendor Id because i used the wrong ROM. where can i get it please?
Many thanks!
I asume you already read the Wiki, if not here it is!:
http://wiki.xda-developers.com/index.php?pagename=HTC_Athena
I´m sure it can help you a lot
Good luck,
hi all,
thank you orb3000, i read the wiki and i found in the ATHENA x7500 manual that it's possible to Upgrade OS through SD Card in bootloader menu but it seems like the download OS image link http://htcscm10.htc.com.tw/SDO is no longer available. Please could someone help me found it?
Thanks a lot!
Hi all,
i tried to upgrade my HTC x7500 via SD card using a .nbh file found in ap3.rar
but it didn't work. After enter in the bootloader, it displays "loading..." and "00068002" and after few seconds it's going back to the colored screen displaying the Rom version 1.07.0000
What does the "0068002" mean? i suppose it's an error code.
Please could somebody help me get a image file version earlier than 1.07.0000?
thnks!
marius.alain said:
Hi all,
i tried to upgrade my HTC x7500 via SD card using a .nbh file found in ap3.rar
but it didn't work. After enter in the bootloader, it displays "loading..." and "00068002" and after few seconds it's going back to the colored screen displaying the Rom version 1.07.0000
What does the "0068002" mean? i suppose it's an error code.
Please could somebody help me get a image file version earlier than 1.07.0000?
thnks!
Click to expand...
Click to collapse
Hi marius
I assume you read
[/QUOTE]
Rename the .NBH file to ATHEIMG.nbh and copy it to your miniSD card. Press camera+com manager+soft reset to bootloader and wait for reading ATHEIMG.nbh from SD. Remember, the miniSD card must be formatted with a FAT32 filesystem before copying the file ATHEIMG.nbh to your miniSD. After finished, do a soft reset.
[/QUOTE]
sometimes sd flashing wont work with an sdhc card
but in any case you have not unlocked the rom yet.
You need spl 1.2 to flash the ap3 rom
I cant remember if you are the guy trying to find a dutch rom but try and find an original rom for your athena and then flash that.
once it is working you can apply the unlocker and then flash any rom
Hi lakeman,
Unfortunately i can't use the spl 1.2 to unlock my HTC X7500 because it crashes just after startup (when displaying desktop) preventing me from using. Is there a possibility to use the spl 1.2 via the miniSD card? I'm not using the sdhc card.
Thanks for help!
hi again
youmust unlock the athena before flashing an spl1.2 rom
you can flash your original rom from the bootloader menu to get a working rom ,
once you have done this you can use the unlocker and then flash any 1.2rom
Hi,
i tried to flash my ROM with this: Advantage_HTC_WWE_2.21.405.2_1.50.00.00_Ship found in the Wiki but it failed, i received ERROR 294: INVALID VENDOR ID. i get this error many times while trying to flach my ROM.
My ROM version is 1.07.0000, please do you know where i can find the same version or one which will work?
Thanks.
marius.alain said:
Hi,
i tried to flash my ROM with this: Advantage_HTC_WWE_2.21.405.2_1.50.00.00_Ship found in the Wiki but it failed, i received ERROR 294: INVALID VENDOR ID. i get this error many times while trying to flach my ROM.
My ROM version is 1.07.0000, please do you know where i can find the same version or one which will work?
Thanks.
Click to expand...
Click to collapse
Marius you need to get the original language rom that came with your athena
I don't know for sure but i think spl 1.07 is the dutch rom which is nowhere to be found at present
i suggest doing a search for this or contacting htc or the original supplier of your phone.
Alternatively post a request in xda but I would do it in the general section to get a wider audience
Hello,
Thanks Lakeman. I tried to get it from HTC Support in vain, as you recomended, i'll post a new thread on xda concerning the spl1.07 (my ROM language is English not dutch).
Regards.
marius.alain said:
Hello,
Thanks Lakeman. I tried to get it from HTC Support in vain, as you recomended, i'll post a new thread on xda concerning the spl1.07 (my ROM language is English not dutch).
Regards.
Click to expand...
Click to collapse
I had another thought.
Have you tried flashing the dopod roms from here
ftp://ftp.xda-developers.com/Athena/Shipped_Complete_Updates/
or does your machine have tmobile branding , in which case you could try the tmobile roms
regards michael
lakeman said:
I had another thought.
Have you tried flashing the dopod roms from here
ftp://ftp.xda-developers.com/Athena/Shipped_Complete_Updates/
or does your machine have tmobile branding , in which case you could try the tmobile roms
regards michael
Click to expand...
Click to collapse
hello,
when trying to connect to ftp://ftp.xda-developers.com/Athena/Shipped_Complete_Updates/ i get this message: 503 Permission denied. I suppose i haven't rights to access the Ftp server, could you tell me how can i do to get the dopop roms?
Thanks!
Hi
I´m in trouble with my Desire and need professional help.
It´s a (was a?) 093.0001 with root and s-off
I´ve installed Leedroid V3.07 (Gingerbread) incl. Custom HBoot for data++ and the Radio 32.56.00.32U_5.17.05.08
I´ve tried to flash it back to original by using the orig. 2.2 Stock Rom from HTC. As far as I know should this be enough to bring it back to original.
Now there is the following problem:
The update breaks with the message, I´ve got to use an other RUU. The phone hangs with a black screen and triangles in it.
I can not start it in BL mode. It hangs with a partition failure.
Is this a fullbrick or is there a way to fix it? Does the radio make this problems? How can i create a higher radio number to overflash it?
What woulda real specialist do now?
Thanks for help...
[email protected] said:
Hi
I´m in trouble with my Desire and need professional help.
It´s a (was a?) 093.0001 with root and s-off
I´ve installed Leedroid V3.07 (Gingerbread) incl. Custom HBoot for data++ and the Radio 32.56.00.32U_5.17.05.08
I´ve tried to flash it back to original by using the orig. 2.2 Stock Rom from HTC. As far as I know should this be enough to bring it back to original.
Now there is the following problem:
The update breaks with the message, I´ve got to use an other RUU. The phone hangs with a black screen and triangles in it.
I can not start it in BL mode. It hangs with a partition failure.
http://forum.xda-developers.com/showthread.php?t=695
Is this a fullbrick or is there a way to fix it? Does the radio make this problems? How can i create a higher radio number to overflash it?
What woulda real specialist do now?
Thanks for help...
Click to expand...
Click to collapse
Hi Patrick,
This happens usually with branded phones. In this thread you'll have to find the appropriate RUU, the RUU designed for your phone's original carrier. Did you make a goldcard ?
No, I did not make a goldcard.
I thought, Goldcard is not longer needed, so I dind´t make one...
But I´m a step closer (or did I make a sep back?)
I had acces via fastboot and tried to flash an other stock ROM via fastbootcommander...
Now I have the old HBOOT 0.93.0001 and my old radio. I´n not root anymore, and s-on is now printed in the display - but the flash stops with an partition failure again...
Is the partition failure the point to search for branded roms?
[email protected] said:
No, I did not make a goldcard.
I thought, Goldcard is not longer needed, so I dind´t make one...
But I´m a step closer (or did I make a sep back?)
I had acces via fastboot and tried to flash an other stock ROM via fastbootcommander...
Now I have the old HBOOT 0.93.0001 and my old radio. I´n not root anymore, and s-on is now printed in the display - but the flash stops with an partition failure again...
Is the partition failure the point to search for branded roms?
Click to expand...
Click to collapse
Do you have any idea if your phone is branded ?
No, I have no idea... bevore I start rooting i did not have seen any signs for a branding.
Mostly the desire shows an own startlogo from the carrier, isn´t it?
My problem is, the update is starting, but it aborts at ~50% with this failure...
All other updates won´t start, just this one RUU goes up to 50 percent...
[email protected] said:
No, I have no idea... bevore I start rooting i did not have seen any signs for a branding.
Mostly the desire shows an own startlogo from the carrier, isn´t it?
Click to expand...
Click to collapse
I didn't see any ROM for a German provider. Which RUU did you try to flash ?
paul.c said:
I didn't see any ROM for a German provider. Which RUU did you try to flash ?
Click to expand...
Click to collapse
I try this one:
RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00.32U_5.11.05.27_release_159811_signed
Is there a way to dump a firmware from a running desire?
[email protected] said:
I try this one:
RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00.32U_5.11.05.27_release_159811_signed
Is there a way to dump a firmware from a running desire?
Click to expand...
Click to collapse
I see. How does the error sound exactly ?
Maybe this RUU would help: http://shipped-roms.com/download.ph...io_32.30.00.28U_4.05.00.11_release_121684.exe
Edit: check this out: http://oxygenrom.com/viewtopic.php?f=5&t=190
Edit: this is a slightly older WWE RUU: http://shipped-roms.com/download.ph...9.00.32U_5.11.05.27_release_151783_signed.exe
this rom does nor work for me... I tried it a few times theis night...
The Error sounds [Error 131] - This Rom Update Utility can not update this Android Phone - Get the right ROM Update Utility Program and try again.
Sorry, I´m not very good in translating things, but Error 131 is the Problem for now...
Bevore this it told me there was a partition failure (step 6)...
[email protected] said:
this rom does nor work for me... I tried it a few times theis night...
The Error sounds [Error 131] - This Rom Update Utility can not update this Android Phone - Get the right ROM Update Utility Program and try again.
Sorry, I´m not very good in translating things, but Error 131 is the Problem for now...
Bevore this it told me there was a partition failure (step 6)...
Click to expand...
Click to collapse
Have you installed HTC Sync and drivers ?
I have installed the correct drivers, HTC Sync is not installed anymore...
I wonder that I have no access to my bootloader, just this black screen. But if I pull off the cable from my desire, i have the white bootloader screen, just without any entrys...
[email protected] said:
I have installed the correct drivers, HTC Sync is not installed anymore...
I wonder that I have no access to my bootloader, just this black screen. But if I pull off the cable from my desire, i have the white bootloader screen, just without any entrys...
Click to expand...
Click to collapse
You need HTC Sync. Start your phone in fastboot (back button + power), connect you phone and run RUU.
I´ve tried it a serval times, as admin, without admin rights, various combinations of rights and versions and have everytime the same problem...
I cann not see the phone starting in fastboot, even if I try to boot, the phone hangs with this black pic...
If I disconnect the cable from the phone I see the white page, but the last Entry is ruu, nothing more... there is nothing I can navigate to.
[email protected] said:
I´ve tried it a serval times, as admin, without admin rights, various combinations of rights and versions and have everytime the same problem...
I cann not see the phone starting in fastboot, even if I try to boot, the phone hangs with this black pic...
If I disconnect the cable from the phone I see the white page, but the last Entry is ruu, nothing more... there is nothing I can navigate to.
Click to expand...
Click to collapse
Try this: http://forum.xda-developers.com/showthread.php?t=921398&highlight=create+goldcard
Hey [email protected] . . 1st check if your pc is recognising your phone.
Connect to pc and check in device manager what is it showing.. should be adb or bootloader interface.. if not try to install adb driver...
than once its done.
try to run this RUU
http://shipped-roms.com/download.ph...9.00.32U_5.11.05.27_release_151783_signed.exe
basically error 131 is for CID.. so you will require a goldcard for that.. just try your luck .. remove both memory card and simcard.. and run the RUU..
Let us know the results
Allright everybody - It works! Feels like birthday @ christmas together, including a final blowjob and a cold beer togeter
What did I do? I´ve created a new goldcard on a second desire, used this card and started the final RUU again - That was all... Little think, big Impression
I thought all the time, the goldcard was specific for the telephone, but it was specially for the memory card.
Thanks a lot for all of your help! I know, there were many help for this stupid guy
But you all have saved the live of my desire... Thanks
[email protected] said:
Allright everybody - It works! Feels like birthday @ christmas together, including a final blowjob and a cold beer togeter
What did I do? I´ve created a new goldcard on a second desire, used this card and started the final RUU again - That was all... Little think, big Impression
I thought all the time, the goldcard was specific for the telephone, but it was specially for the memory card.
Thanks a lot for all of your help! I know, there were many help for this stupid guy
But you all have saved the live of my desire... Thanks
Click to expand...
Click to collapse
I'm glad for you. This is how you learn, stupidity has nothing to do with it.
paul.c said:
I'm glad for you. This is how you learn, stupidity has nothing to do with it.
Click to expand...
Click to collapse
Yes, you´re right... I´ve tryes a lot, I´ve learned even more tonight...
OK, second shot - I´m going to root & s-off my phone again...
[email protected] said:
Yes, you´re right... I´ve tryes a lot, I´ve learned even more tonight...
OK, second shot - I´m going to root & s-off my phone again...
Click to expand...
Click to collapse
Don't forget your glodcard. Keep it safe.