Develop Bugs

Need a Guide to get from stock GB to CM10

I have a stock glide on gingerbread and want to test out the CM10 in the development section.
If anyone could help with a step by step guide it would really be appreciated. I know there are
other posts which describe each part but I am having trouble find them. Thank You.

EGGrollBEAST said:
I have a stock glide on gingerbread and want to test out the CM10 in the development section.
If anyone could help with a step by step guide it would really be appreciated. I know there are
other posts which describe each part but I am having trouble find them. Thank You.
Click to expand...
Click to collapse
Odin stock ics leak
Odin CWM recovery
wipe data
wipe cache
wipe dalvik cache
format data
format cache
format system
choose zip and flash
Flash Gapps!
from http://forum.xda-developers.com/showthread.php?t=1940677 OP

Thank you for your reply. I am a total noob. how do I use Odin??
Sent from my SAMSUNG-SGH-I927 using xda app-developers app

BEFORE YOU START. I AM NOT RESPONSIBLE FOR ANY DAMAGE OR DATA LOSS ANY OF THESE STEPS MAY CAUSE. ALWAYS FLASH AT YOUR OWN RISK.
Note: Suggestions, comments & questions are welcome. Will improve as much as needed.
1. BACKUP. There are many apps you can find to backup any data. Backup all data you'll want to keep until you're 100% satisfied then move it to a folder on your PC. Personally, I use Titanium Backup Pro and backup everything to Google Drive.
2. DOWNLOAD. A GB kernel, rooted AT&T ROM/Rogers ROM, stock ICS leak, CWM, and then go to the CM10 thread and grab the latest build of the ROM & Gapps. So you should have 6 files total. To make your life easier, put them all in 1 folder.
3. ROOT. Turn off your phone. Hold the top part of the volume rocker and turn on the phone. It should boot into download mode if done correctly. Connect phone to PC via USB. On your PC, install & open Odin. Click on PDA and locate your GB kernel. Then click start & wait. If successful, you should see green and you'll be rooted. I believe whenever you use ODIN, it is called a 'flash.' I hope someone will correct me if I'm wrong. Anyway, go back into download mode and now place the rooted ROM in the PDA section followed by clicking start again. When the phone is done booting, go to the Play store and get Superuser app. This allows you to give permission to operations that require root. Make sure it is updated!
4. CLEAN. Now you'll want to wipe your phone to minimize the chances of anything going wrong. Instead of holding the top part of the volume rocker, you'll hold the bottom. Then hold it as you start the phone. This is the stock recovery menu. I don't remember precisely what the options are called but you will want to wipe cache, dalvik, data and system.
5. UPDATE OS. Time to open up that stock ICS leak. When open, it should appear similar to Odin. Make sure your phone is in download mode again, connected via USB and click start again. You'll notice that your phone might take a while to boot up. It'll be updating files and apps so be patient.
6. CWMR. After it's all booted up, time to go back to download mode again. In ODIN, you'll want to click on PDA again and this time flash the CWMR file. Click start and you're done in no time.
7. CLEAN AGAIN. Now you'll want to turn off your phone and boot the phone holding the bottom of the rocker. You'll boot into CWMR. Time to wipe and format again. You'll find the first 2 wipe options on the first page. The wiping of dalvik cache will be in the ADVANCED menu. Then you'll want to go into the MOUNTS AND STORAGE menu. Format system, cache & data.
8. CM10. Now while still in CWMR, you'll need to go into the MOUNTS AND STORAGE menu and select MOUNT USB STORAGE. You'll want to connect your phone to your PC with the USB. Place the CM10 and Gapps files in the main directory of your PHONE'S INTERNAL STORAGE. Select UNMOUNT on your phone, disconnect from USB and now you'll want to go to the option INSTALL ZIP FROM SDCARD.. then go to the CHOOSE.. option and select the final fruit of your labor, CM10. When it's done doing it's thing, REBOOT SYSTEM. Be patient and let everything load.
9. GAPPS. After everything has loaded, you want to turn off the phone and boot into CWMR one last time. Go to INSTALL ZIP FROM SDCARD, CHOOSE ZIP and flash that Gapps file. Then REBOOT SYSTEM.
10. RESTORE. Reinstall the app you used to backup your stuff, move your backup files you put on the PC back to it's rightful place and restore. You should be good to go.

rogernizzLe said:
BEFORE YOU START. I AM NOT RESPONSIBLE FOR ANY DAMAGE OR DATA LOSS ANY OF THESE STEPS MAY CAUSE. ALWAYS FLASH AT YOUR OWN RISK.[/SIZE]
If any of the more experienced people find errors in this "guide", please let me know.
1. BACKUP.
.
.
.
Click to expand...
Click to collapse
Thank you for doing this!
Just checking - is there not a thread / guide for this elsewhere already? (Or am I confusing versions - not for the first time, with xda-developers!)
Suggestions:
- move this to the start of a new thread where you can reserve the first 3 posts, you can update/edit it, etc.
1. BACKUP:
- it would be useful to mention CWMR backup. (i.e. Botch it, restore the image, try again.)
- I like not leaving people hanging and at least mentioning TB as you have so they have a search path to follow. It would be worth mentioning that TB Free will be 'good enough' to keep them safe (one time) through this process. [But long term / good app / scheduling makes TB Pro worthwhile.]
- Making TB and CWMR a link would be useful, and not just a link to the 'product' page, but link to a thread that describes how to do so. 'Product' links will be contained within them. It's all very well to get a link to what a beastie is, but frequently knowing what it is, and how to put it into practice are two different things. Linking to a thread of the latter type would be the useful one.
3. ROOT
- one of the problems when talking about ODIN is the perception left that it is a single thing. So saying 'ODIN (PC)' would be useful here. Whether you point out that it talks to the ODIN (client?) already built in to the PDA is up to you.
4. UPDATE OS:
- don't you want to be talking about the alpha/beta dudejb version here?
5. CWMR
- wouldn't you want to do this first? See Backup comments, above.
- is this even necessary? It's a VERY GOOD IDEA, but is CWMR needed to run the phone 'stock' (CM10)?
7. CM10
- links / explanations are going to be useful here.
- e.g. There's a lot of talk of subsequent steps, such as backlight fix. You might want to note such is already built in, or not. (As people read they come across these additional fixes, and it's not always apparent that months later someone built the fixes in already. It's easy to go in circles trying to get a coherent, whole, current, view of the world.)
SD Card management - first you TB Backup, then you wipe the SD Card (or so a quick glance appears). I know you haven't actually said that, but some explicit clarity may be helpful.

Thanks for the suggestions and good question. I don't think there are any guides out there.. but this is just from how I did it. Tried to make it as simple as I could without adding branching steps. Also, it's very narrow because I can only speak on behalf of the what worked for me. If there's a big need for this to be in a thread of it's own, I'll gladly make one.
-I didn't mention CWMR backup for two reasons. I didn't use it and I don't rely on it. Perhaps I should mention it anyway though regardless.
-Never used dudejb's version so I didn't list it.
-Needed CWMR at that point to install CM10 & Gapps zips. I think you can also use Odin but doing it via CWMR gives him a chance to familiarize himself with what he'll be using to flash future versions.
-Didn't put links to CM10 since he already knows where it is and can most likely read the fixes & not-fixed list himself.

Thanks RogerNIZZLE I appreciate the guide and I believe a lot of other ppl will too.
There is one hiccups i'm coming across. After I wipe, data, cache, dalvik cache,
I **format data, format cache, format system** then when it reboot and it just stays at the
start up screen that shows SAMSUNG. I let it sit for 5 but nothing happens, its still
on SAMSUNG. I've repeated the steps a few times? Is there any suggestions on what I can do?

Hm. Do steps 4, 5, 7, 8, 9. Sorry! All hope is not lost.

rogernizzLe said:
Hm. Do steps 4, 5, 7, 8, 9. Sorry! All hope is not lost.
Click to expand...
Click to collapse
Do steps 4,5 and then copy the cm10 and gapps to you phone internal memory. Then follow step 6. Lastly install cm10 and gapps together and reboot you phone.
Sent from my SGH-I927

@roger:
You should start a thread, and I'll request to get it stickied. This could help a lot of new users.
One thing I would add - before flashing ICS, wipe system data cache dalvik (either with stock recovery or cwmr). Then boot into download and flash ICS.

Okie dokie, I will do this after work.

EGGrollBEAST said:
I have a stock glide on gingerbread and want to test out the CM10 in the development section.
If anyone could help with a step by step guide it would really be appreciated. I know there are
other posts which describe each part but I am having trouble find them. Thank You.
Click to expand...
Click to collapse
i suppose u already know that you need a rooted phone before rom flashing is possible. what i did was to flash ics leak using clockwork recovery and then cm10.

IS ANYBODY AWARE THAT THERE IS NO OFFICIAL CM10 NIGHTLY ON GET.CM??? Please stop telling people to look there!

bs27975 said:
Thank you for doing this!
4. UPDATE OS:
- don't you want to be talking about the alpha/beta dudejb version here?
Click to expand...
Click to collapse
How did I get a version? Not sure what is meant by that?
JB

C3LLxM8 said:
IS ANYBODY AWARE THAT THERE IS NO OFFICIAL CM10 NIGHTLY ON GET.CM??? Please stop telling people to look there!
Click to expand...
Click to collapse
Did you know you don't have to tell at us... once you learn that. I'd like to say there won't be an official cm10 because the official cm secs think our phone runs on different hardware than it actually does and thinks they can get the phys. keyboard working. You should thank dman for even getting cm9 and beta cm10 where they are.
Sent from my SGH-I927 using xda app-developers app

Rawr0w0 said:
Did you know you don't have to tell at us... once you learn that. I'd like to say there won't be an official cm10 because the official cm secs think our phone runs on different hardware than it actually does and thinks they can get the phys. keyboard working. You should thank dman for even getting cm9 and beta cm10 where they are.
Sent from my SGH-I927 using xda app-developers app
Click to expand...
Click to collapse
Yes dman should be thanked, so hard his thanks gland fails.
Official CyanogenMod is not being made because -we- have different hardware than the other SGSII range of phones.
So yeah. No use pointing at get.cm
In other news, these instructions, amazing.
Sent from my SGH-I927 using xda premium

I take to credit for the work on the various links i'll post. (I WONT BE HELD RESPONSIBLE FOR ANY DAMAGE TO YOUR PHONE)
1. In order to get CM10, first get instructions on rooting(if you have root,SKIP) via http://forum.xda-developers.com/showthread.php?t=1378082
2. When you have gotten root, flash CWMR via http://forum.xda-developers.com/showthread.php?t=1458153 or http://forum.xda-developers.com/showthread.php?t=2007198
(MAKE SURE YOU DO A NANDROID BACKUP AFTER YOU SUCCESSFULLY FLASH CWMR)
3. Next step is to flash ICS leak UCLG9 via http://forum.xda-developers.com/showthread.php?t=1841502 (could not find thread for CWM flashable UCLJ3)
4. Once you are now on UCLG9, you can now flash CM10 by Dman.
If i helped, please hit thanks.
Sent from my super SGH I927(Flashed almost all custom Roms). Currently on Dmans CWM flashable UCLJ3
I maybe JM but really XPerienced.

[HOWTO] Install CM10 from Stock for Captivate Glide

BEFORE YOU START. I AM NOT RESPONSIBLE FOR ANY DAMAGE OR DATA LOSS ANY OF THESE STEPS MAY CAUSE. ALWAYS FLASH AT YOUR OWN RISK.
Note: Suggestions, comments & questions are welcome. Will improve as much as needed.
1. BACKUP. There are many apps you can find to backup any data. Backup all data you'll want to keep until you're 100% satisfied then move it to a folder on your PC. Personally, I use Titanium Backup Pro and backup everything to Google Drive.
2. DOWNLOAD. A GB kernel, rooted AT&T ROM/Rogers ROM, stock ICS leak, CWM, and then go to the CM10 thread and grab the latest build of the ROM & Gapps. So you should have 6 files total. To make your life easier, put them all in 1 folder.
3. ROOT. Turn off your phone. Hold the top part of the volume rocker and turn on the phone. It should boot into download mode if done correctly. Connect phone to PC via USB. On your PC, install & open Odin. Click on PDA and locate your GB kernel. Then click start & wait. If successful, you should see green and you'll be rooted. I believe whenever you use ODIN, it is called a 'flash.' I hope someone will correct me if I'm wrong. Anyway, go back into download mode and now place the rooted ROM in the PDA section followed by clicking start again. When the phone is done booting, go to the Play store and get Superuser app. This allows you to give permission to operations that require root. Make sure it is updated!
4. CLEAN. Now you'll want to wipe your phone to minimize the chances of anything going wrong. Instead of holding the top part of the volume rocker, you'll hold the bottom. Then hold it as you start the phone. This is the stock recovery menu. I don't remember precisely what the options are called but you will want to wipe cache, dalvik, data and system.
5. UPDATE OS. Time to open up that stock ICS leak. When open, it should appear similar to Odin. Make sure your phone is in download mode again, connected via USB and click start again. You'll notice that your phone might take a while to boot up. It'll be updating files and apps so be patient.
6. CWMR. After it's all booted up, time to go back to download mode again. In ODIN, you'll want to click on PDA again and this time flash the CWMR file. Click start and you're done in no time. CWMR replaces stock recovery with the same options plus extra goodies.
7. CLEAN AGAIN. Now you'll want to turn off your phone and boot the phone holding the bottom of the rocker. You'll boot into CWMR. Time to wipe and format again. You'll find the first 2 wipe options on the first page. The wiping of dalvik cache will be in the ADVANCED menu. Then you'll want to go into the MOUNTS AND STORAGE menu. Format system, cache & data.
8. CM10. Now while still in CWMR, you'll need to go into the MOUNTS AND STORAGE menu and select MOUNT USB STORAGE. You'll want to connect your phone to your PC with the USB. Place the CM10 and Gapps files in the main directory of your PHONE'S INTERNAL STORAGE. Select UNMOUNT on your phone, disconnect from USB and now you'll want to go to the option INSTALL ZIP FROM SDCARD.. then go to the CHOOSE.. option and select the final fruit of your labor, CM10. When it's done doing it's thing, REBOOT SYSTEM. Be patient and let everything load.
9. GAPPS. After everything has loaded, you want to turn off the phone and boot into CWMR one last time. Go to INSTALL ZIP FROM SDCARD, CHOOSE ZIP and flash that Gapps file. Then REBOOT SYSTEM.
10. RESTORE. Reinstall the app you used to backup your stuff, move your backup files you put on the PC back to it's rightful place and restore. You should be good to go.
Credits in no special order:
dman3285 (CM10)
CarpeNoctem (Root Guide)
ardatdat (Kernel)
designgears (Stock ICS Leak)
utkanos (CWMR 5.0.2.7)

Someone said doing this is a good idea so..

rogernizzLe said:
Someone said doing this is a good idea so..
Click to expand...
Click to collapse
You've made the same mistake as in your previous post. Step 6 for cleaning up the phone should be after you copy the cm10 and gapps to internal storage or otherwise from cwmr you'll have to mount storage and then copy the files from your comp. If you format system then you won't be able to boot at all.
And after the copy you can do all the format and cleaning and install cm10 and then gapps together and reboot finally.
This guide would be a good help to the new users. Hopefully you can incorporate the changes to correct it.
Sent from my SGH-I927

ninthsense said:
You've made the same mistake as in your previous post. Step 6 for cleaning up the phone should be after you copy the cm10 and gapps to internal storage or otherwise from cwmr you'll have to mount storage and then copy the files from your comp. If you format system then you won't be able to boot at all.
And after the copy you can do all the format and cleaning and install cm10 and then gapps together and reboot finally.
This guide would be a good help to the new users. Hopefully you can incorporate the changes to correct it.
Sent from my SGH-I927
Click to expand...
Click to collapse
Sorry, really wanted to play AC3. Fix'd the cleaning stage. I realized I actually did mount the storage. Looks okay, I hope?

Hey, I followed these steps and it worked.
Didn't run into any major problems, except for having to download the CM10 file using my phone itself, I couldn't download it from my computer (found this out in the CM10 post, pg 29).
It really helps to follow OPs instructions, but also read up on all of the individual threads he links to before actually doing anything.
Thanks rogernizzLe!

Glad it helped. Enjoy!

So all the features of the phone works? Physical keyboard, 3G, GPS, WiFi?

Do you have to use the 1 click?
I have ICS installed via CLock work Mod and Have the Lite Kernel.
Should I not just be able to install JB from Clock work mod? I have never used the 1 click installer but I am on ICS with an ICS Kernel.
Waiting for everything to work before I flash JB. Heard there were still issues with the camera.

r0bot said:
So all the features of the phone works? Physical keyboard, 3G, GPS, WiFi?
Click to expand...
Click to collapse
For a list of what works in the CM10 ROM, check it's thread's OP. dman updates it as bugs are being fixed/found.
dudejb said:
Do you have to use the 1 click?
I have ICS installed via CLock work Mod and Have the Lite Kernel.
Should I not just be able to install JB from Clock work mod? I have never used the 1 click installer but I am on ICS with an ICS Kernel.
Waiting for everything to work before I flash JB. Heard there were still issues with the camera.
Click to expand...
Click to collapse
The method is how I got to JB. There's probably other ways but this worked for me. And yes, currently camera doesn't work.

If I may suggest ... some post updates would be useful ...
Post #1:
rogernizzLe said:
... and then go to the CM10 thread ...
Click to expand...
Click to collapse
- could you update with a link to the thread? (There are so many!)
Post #2:
rogernizzLe said:
Someone said doing this is a good idea so..
Click to expand...
Click to collapse
- didn't and don't understand this at the time.
- perhaps a "(reserving a message slot)" in the middle would clarify.
- my guess was, this post was saying doing the things in post 1 was a good idea.
- only later did I realize you were probably referring to the reservation of the message slot.
Post #9:
rogernizzLe said:
... For a list of what works in the CM10 ROM, check it's thread's OP. dman updates it as bugs are being fixed/found. ...
Click to expand...
Click to collapse
- a link to the thread you mean, for later readers, would also be useful here.

thx so much
it's really helpful for a fisher like me

[Q] How to go from 4.0.3 Jedi Mind Trick to Cyanogenmod 10.0.0 Stable Release

Hello all just bought a new Samsung Galaxy SII from craigslist already rooted with 4.0.3 Jedi Mind Trick. After reading for what seems 4-5 hours i have been trying to put together how to properly without bricking switching it to 10.0.0 Stable as i use to use Cyanogenmod 2-3 years ago on my devices. Seem alot of things have changed and there is a cluster**** of stuff out there now. If you could direct me to a how to or show me how to do it i would greatly appreciate it!
Thanks all!

Assuming you have nothing personal to back up that you can't just download from google play or your google account again: download cyanogen 10 and it's gapps. reboot into recovery mode. factory reset, wipe data, wipe system, wipe cache, wipe dalvik. pick the install zip from sd card or so option, browse to cyanogen, then install gapps the same way. wipe dalvik again and reboot.

I was thinking of doing this myself JMT to CM10. I didn't think there was anything special to do same as flashing from any other ROM to CM10. If there is a special requirement I would think they'd post in in with the ROM post information.

Alawishis said:
I was thinking of doing this myself JMT to CM10. I didn't think there was anything special to do same as flashing from any other ROM to CM10. If there is a special requirement I would think they'd post in in with the ROM post information.
Click to expand...
Click to collapse
so I attempted to install it and got stuck on the boot logo for 20 minutes or so. So I bricked it lol... Anyway I just flashed it with Odin to 2.3.5 but the link to download file for root capabilities is broken. What can i do? Do i have to go to ics first before i reattempt to go to 10.0.0?

melvinator said:
so I attempted to install it and got stuck on the boot logo for 20 minutes or so. So I bricked it lol... Anyway I just flashed it with Odin to 2.3.5 but the link to download file for root capabilities is broken. What can i do? Do i have to go to ics first before i reattempt to go to 10.0.0?
Click to expand...
Click to collapse
honestly - i backed up everything to my external and then formatted the internal when i went from TW to AOSP for the last time. well worth it. nice folder clean up and then you can just manually take all the stuff you want back.
and you should just be able to odin on cwm or twrp - then flash the rom of your choice.

new ion? said:
honestly - i backed up everything to my external and then formatted the internal when i went from TW to AOSP for the last time. well worth it. nice folder clean up and then you can just manually take all the stuff you want back.
and you should just be able to odin on cwm or twrp - then flash the rom of your choice.
Click to expand...
Click to collapse
trying to look up how to do that now .... Searching the forum now... Might you be able to tell me real quick how? I already Downloaded the 5.2 file they suggest to use but can't find a working toturial that is just for flashing the cwm.

melvinator said:
so I attempted to install it and got stuck on the boot logo for 20 minutes or so. So I bricked it lol... Anyway I just flashed it with Odin to 2.3.5 but the link to download file for root capabilities is broken. What can i do? Do i have to go to ics first before i reattempt to go to 10.0.0?
Click to expand...
Click to collapse
If you get stuck at the boot logo, it's called a soft brick. You don't have to use ODIN or go back to ICS. Just make sure the ROM zip you downloaded isn't corrupt (check the size/m5d if possible), wipe everything, and reboot into recovery to try installing again.

arcsine said:
If you get stuck at the boot logo, it's called a soft brick. You don't have to use ODIN or go back to ICS. Just make sure the ROM zip you downloaded isn't corrupt (check the size/m5d if possible), wipe everything, and reboot into recovery to try installing again.
Click to expand...
Click to collapse
I already used Odin to go back to 2.3.5
Btw I appreciate the help
My woman's is waiting that I fail to say I told you so -_-

melvinator said:
I already used Odin to go back to 2.3.5
Btw I appreciate the help
My woman's is waiting that I fail to say I told you so -_-
Click to expand...
Click to collapse
You won't fail. Follow the guidelines step by step. Print it out, make notes. Anything. Read. The step by step guide works... that'll get you with cwm. Then, you can flash the zip you will put on your phone... either a SU zip or just a rooted ROM. Follow flashing instructions.
Just realized - you'll be way better off if, once you have cwm on, just format the internal ONCE YOU HAVE A ROM ON AN EXTERNAL SD CARD. then flash CM10. THEN you'll have a fresh AOSP install.
Sent from my SAMSUNG-SGH-T989 using xda premium

new ion? said:
You won't fail. Follow the guidelines step by step. Print it out, make notes. Anything. Read. The step by step guide works... that'll get you with cwm. Then, you can flash the zip you will put on your phone... either a SU zip or just a rooted ROM. Follow flashing instructions.
Just realized - you'll be way better off if, once you have cwm on, just format the internal ONCE YOU HAVE A ROM ON AN EXTERNAL SD CARD. then flash CM10. THEN you'll have a fresh AOSP install.
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
how long does the boot logo stay on for?
Had 2.3.5 - rooted via odin and have recovery 5.2.6 - did everything in proper order and wiping properly.
what am i skipping here? Still spinning taunting me, wish there was a way it would tell me if i did something wrong.

melvinator said:
how long does the boot logo stay on for?
Had 2.3.5 - rooted via odin and have recovery 5.2.6 - did everything in proper order and wiping properly.
what am i skipping here? Still spinning taunting me, wish there was a way it would tell me if i did something wrong.
Click to expand...
Click to collapse
Go back, format system, and then reinstall.
Sent from my SAMSUNG-SGH-T989 using xda premium

Update your recovery to twrp or cwm 6+ and don't use dark side scripts
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2

Please excuse my harshness but this is not as hard as many make it seem. I would say if it takes you more than a couple attempts maybe it is just not for you. I only say this because I would hate to see you mess up your phone. Now if you think a bootloop is a brick then we need to do things at a slower pace with you.
If you already have your phone rooted then
1.download goomanager from the playstore and then
2.open it up and allow it to grant permission from CM
3.hit menu button while goo manager is open
4.click on install OpenRecoveryScript
5.let it do its thing
6.reboot into your new TWRP recovery
7.Wipe/Data Factory Reset
8.Flash Rom
9.Flash Gapps
10.Reboot
You can throw in a backup of files somewhere in there if you like.... Your choice

melvinator said:
how long does the boot logo stay on for?
Had 2.3.5 - rooted via odin and have recovery 5.2.6 - did everything in proper order and wiping properly.
what am i skipping here? Still spinning taunting me, wish there was a way it would tell me if i did something wrong.
Click to expand...
Click to collapse
I had a bootloop when using CWM v6.0.1.5. So a friend of mine told me he had success with CWM v6.0.1.5 Touch. So I switched to the touch recovery and... SUCCESS.
Here's the link to CWM touch and non-touch:
http://forum.xda-developers.com/showthread.php?t=1893464

A boot loop could mean a bad download or bad flash but it is most definitely NOT a bricked device. All you needed to do was get a fresh download and move it to your SD card by mounting it in recovery. Then, wipe EVERYTHING but the SD. EVERYTHING. Then flash the ROM, Gapps and whatever radio. I go from CM to AOKP to other random TW roms all the time and never have issues.

The 2 best recoveries are twrp or my favorite because I'm used to it is cwm 6.0.1.5. http://forum.xda-developers.com/showthread.php?t=1844637
Also if your phone boot loops don't freak out' just either reboot to see if that works out first and if not reboot into recovery. Also with these new recoveries do not use dark side scripts.
Factory reset
Format system
Format cache
Format data
Flash ROM
Flash gapps
Reboot and enjoy
Sent from my SAMSUNG-SGH-T989 using xda premium

This did it!
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

Sorry for the necro on the thread, but I didn't want it to be stated I didn't look around some either.
I am going from JMT to CM and want to make sure it's as seamless as possible. I use CWM and usually usually use darkside complete wipes, but I read in a previous post not to use darkside. Is there a reason for this? I can't see why this wouldn't work as it's just a wipe.
Also I use Titanium Backup. Is it possible to backup my apps and data and restore them since its not TW any longer? I want to be able to restore as much of my data as possible and make sure I don't lose it.
P.S. - If thread necroing is not appreciated, I apologize.

Unable to upgrade Galaxy 3

When the update file downloads then it verifies but when it goes to install, it errors out and stops [see attached image]. There is also mention of Gmail.apk but when I go and look for it, it's not there. I have deleted the file and downloaded several time but wind up with the same result. I have put a copy in the ext sd card and tried from there but it will not install. Any ideas on how to do the upgrade?
Thanks, Dave

Correct me if I'm wrong, but it sounds like you're trying to do an ota when you're rooted (with a custom recovery). This won't work. Please read through this thread by CNexus about otas:
http://forum.xda-developers.com/showthread.php?t=2209418
It should give you everything you need to know.
Sent from my SPH-L710 using xda app-developers app

topherk said:
Correct me if I'm wrong, but it sounds like you're trying to do an ota when you're rooted (with a custom recovery). This won't work. Please read through this thread by CNexus about otas:
http://forum.xda-developers.com/showthread.php?t=2209418
It should give you everything you need to know.
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
Wow! I went through over 30 pages looking for a step by step and am quite confused as to the proper process. I am currently on 4.1.1 with LJ7 and have downloaded MD4 both DeOdex and Odex plus the MD4 kernal. The only thing I did when I got the phone was root it enough to make the hot spot app work.

JOB Dave said:
Wow! I went through over 30 pages looking for a step by step and am quite confused as to the proper process. I am currently on 4.1.1 with LJ7 and have downloaded MD4 both DeOdex and Odex plus the MD4 kernal. The only thing I did when I got the phone was root it enough to make the hot spot app work.
Click to expand...
Click to collapse
Thanks for reading all of it. Most people would just look at the first page and the last page and say "Oh, it's not there!" That being said, I hope you have a better understanding of what's going on when you get an OTA notification.
Now that's been said, I had written a post on another thread that covers the steps A-Z. I've linked it and quoted it below.
Ok, let's start at the very beginning (it's a very good place to start).
Before we get started, I'm going to make the following assumptions:
You successfully rooted your phone through Odin.
You currently have a custom recovery (either TWRP or CWM).
You have a Rom you'd like to flash on either your internal storage or your SDcard (I'd recommend the SDcard, but that's your prerogative).
If either of the first two is not true, I'd recommend going back to qbking77's thread and check out the videos on how to use Odin to gain root and a custom recovery.
If number 3 above is not true, download a ROM (nor someone new to flashing/custom Roms, I'd recommend Freeza's stock rooted Rom, as it's identical to stock TW, but just with Root). Once you download a Rom, check it's md5sum to verify that it's a good download. Copy the file to your SD card and get ready to flash (make sure you have decent battery life left, I try to keep at least 50% or more when flashing Roms, although it shouldn't take too long.
I'll give directions on how to flash a Rom below. The instructions will be for TWRP, but CWM has similar options/settings
Turn your phone completely off (hold down power for 3-5 seconds)
Boot your phone into recovery. Hold Up, Menu, and Power for a few seconds (until SAMSUNG appears on your screen and the phone vibrates)
Make a Nandroid backup. I can't emphasize this enough. In flashing, it's almost a certainty that one time, something will mess up. When that happens, you want to be able to restore a backup. In TWRP, just go into Backup Menu and choose where you want it (internal vs. External storage). It takes my phone a few (5-10) minutes to completely backup my data.
In TWRP, click the wipe button, then system. This will completely wipe the Rom from your phone. Doing this will allow you to get a "clean" install, without any settings or leftover files from your old Rom getting in the way. Instead, you could only wipe data (factory reset), which is good enough for most Roms. I'd still recommend a system wipe, though.
Also while in the Wipe menu, wipe Cache and Dalvik Cache.
Go back to the TWRP main menu.
Click Install, then find your Rom zip file (may have to switch from internal to external storage).
Let TWRP do it's thing.
If you're installing a TW-based Rom, it should have gapps already installed. If not, you should now flash the correct gapps package from goo.im. Make sure you're flashing the correct one, as if you don't, your google apps will force close upon use.
Reboot into system and give it time to boot (first boot sometimes takes a couple of minutes).
Set up your phone the way you like.
These should be the directions to follow whenever you flash a new Rom. Some Roms have the Aroma installer, so you'll have more options once you choose to flash the Rom zip, but those are typically easy to follow (and vary from Rom to Rom, so I won't be able to give you a good guide on that).
Hope this helps!
Click to expand...
Click to collapse

JOB Dave said:
The only thing I did when I got the phone was root it enough to make the hot spot app work.
Click to expand...
Click to collapse
I don't think there's a way to be "just a little rooted"
:silly:
Follow topherk's directions to a tee, and you'll be fine.
As a noob, I was scared to death knowing that I was rooted and I was going to get an OTA!
xda-developers has everything you need. The files, the guides, the support from senior members.
Relax and have fun...
---------- Post added at 06:11 PM ---------- Previous post was at 05:54 PM ----------
BTW, I flashed freeza's md4 odexd rom (cause a stock sg is odex), the md4 firmware, and the optimized kernel. Flashed (installed) them in that order. Just download them from the site onto your phone, and boot into recovery to flash each. Probably too paranoid, but i rebooted after each flash *just* to be sure). Cleared dalvik cache after installing the rom. Ummm, and ran checksum on my files before I installed them (I use md5 checker app).

Thanks, that got me started. now I have to figure out which rom and kernal I want to install.

ROMs come with kernels already, so if you're unsure ATM, just flash a ROM and then later you can check out kernel switching. Just make sure that the kernel you are flashing is for your ROM version (4.1.2, 4.2.2, etc) and for your type (AOSP, Touchwiz).
Since you are just starting out, I would suggest TPR (The Peoples ROM) or MOAR (Mother of All ROMs). Both in Android Dev section (as opposed to Original Android Dev).
TPR also has AROMA installer, so it lets you pick what apps, kernel, and other goodies you want to flash and basically on-the-spot customization.

Downloaded the file MD4_update_FULL_Odex.zip and followed the instructions above and got zip signature failure, see photo. I am wondering if it worth doing the upgrade.
~Dave

In twrp, under settings, you can uncheck the zip file verification option. Most of the time it gives you that error, even though the zip is fine.
Sent from my SPH-L710 using xda app-developers app

topherk said:
In twrp, under settings, you can uncheck the zip file verification option. Most of the time it gives you that error, even though the zip is fine.
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
That worked!! Thanks for all your help.
Am looking at the About screen and the build says I'm on MD4 but the Baseband is still LJ7, do I need to be concerned about that?

JOB Dave said:
That worked!! Thanks for all your help.
Am looking at the About screen and the build says I'm on MD4 but the Baseband is still LJ7, do I need to be concerned about that?
Click to expand...
Click to collapse
Baseband has to do with what modem/radio you are on. This is independent of your ROM, so the two can be different version numbers.
The modem impacts your mobile data coverage and speeds. What you wanna do (if you wanna find the best modem for your area) is to switch modems and run each one for a week. Then switch. After you've gone through a couple modems, single out the ones that qork best and test those out till hou find the best and/or fastest one for your area and the places you frequent.

[Q] How to flash ROM when not recognized by ODIN?

I am trying to flash the SuperNexus 3.0 ROM to my D710 E4GT
http://forum.xda-developers.com/showthread.php?t=2208729
I downloaded the file and tried to open it in the PDA tab of ODIN like I normally would when flashing a device.
There isn't a TAR or MD5 file to open inside of the ZIP file.
I know that I'm missing something and I've searched around but I haven't found anything that points me in the correct direction.
Could somebody point me to what I am missing? Is there a tutorial for installing ROMS from a ZIP that I missed?
Thanks!
-Mike

You're probably the only person I know that doesn't flash using zips lol. Just boot up recovery and install zip. Pretty simple to navigate. This will explain it better http://forum.xda-developers.com/showthread.php?t=1761666
Sent from my SPH-D710 using Tapatalk 4

FuMMoD said:
You're probably the only person I know that doesn't flash using zips lol. Just boot up recovery and install zip. Pretty simple to navigate. This will explain it better http://forum.xda-developers.com/showthread.php?t=1761666
Sent from my SPH-D710 using Tapatalk 4
Click to expand...
Click to collapse
Thanks for the reply I'll check the page out that you posted.
I am a total noob. I've crept the forums and used Odin to flash a lot.
I guess, I'm surprised by the .zip comment. Not because I know anything about anything (By now this should be obvious) but because when you look at a tutorial on flashing your phone, it always points at using odin.

It's one thing to root your phone with Odin and another to flash a custom Rom. All the custom roms are zip files and in the original post of the threads they tell you exactly the best way to flash the Rom.
Sent from my SPH-D710 using Tapatalk 4

FuMMoD said:
It's one thing to root your phone with Odin and another to flash a custom Rom. All the custom roms are zip files and in the original post of the threads they tell you exactly the best way to flash the Rom.
Sent from my SPH-D710 using Tapatalk 4
Click to expand...
Click to collapse
OK. That makes sense. I'm reading that now in the thread you handed to me.
Thanks again!
I knew the info existed, I needed some help getting to it and wrapping my head around it.
It's refreshing to ask an honest question because I'm over-whelmed and not get flamed out.

Yeah the instructions in that thread are not noob friendly. I hope the sticky can help you out. Use the el26 or el29 kernel packed with clockwork mod available in the kernel repo. You can find it in the Android development forum at the top. Use that kernel and recovery combo to safely flash any rom. Also going to jb you need to do an Odin rooted restore of a stock jb Rom in order to partition everything correctly. You'll be able to find this in Android development too. Sorry I can't provide much links im on my phone at work so it'll take me a bit to link.
Sent from my SPH-D710 using Tapatalk 4

FuMMoD said:
Yeah the instructions in that thread are not noob friendly. I hope the sticky can help you out. Use the el26 or el29 kernel packed with clockwork mod available in the kernel repo. You can find it in the Android development forum at the top. Use that kernel and recovery combo to safely flash any rom. Also going to jb you need to do an Odin rooted restore of a stock jb Rom in order to partition everything correctly. You'll be able to find this in Android development too. Sorry I can't provide much links im on my phone at work so it'll take me a bit to link.
Sent from my SPH-D710 using Tapatalk 4
Click to expand...
Click to collapse
So I went to the Kernel Download Page and all of the links to el26 with CWM were dead.
I dug around some more and found this:
w w w. rwilco12.com/Files/Devices/Samsung%20Galaxy%20S2%20%28Sprint%29%20%28SPH-D710%29/Tutorials/SPHD710-Root. p h p
[Can't post URL, new user]
I went with Chris41g's EL26 Stock CWM5 Repack
It looked like what I needed to root with recovery so that I could install the SuperNexus ROM.
Now, my phone has been stuck at the Samsung Galaxy S II screen with the yellow triangle for a half an hour.
Did I miss something else?

HighSeraphim said:
So I went to the Kernel Download Page and all of the links to el26 with CWM were dead.
I dug around some more and found this:
w w w. rwilco12.com/Files/Devices/Samsung%20Galaxy%20S2%20%28Sprint%29%20%28SPH-D710%29/Tutorials/SPHD710-Root. p h p
[Can't post URL, new user]
I went with Chris41g's EL26 Stock CWM5 Repack
It looked like what I needed to root with recovery so that I could install the SuperNexus ROM.
Now, my phone has been stuck at the Samsung Galaxy S II screen with the yellow triangle for a half an hour.
Did I miss something else?
Click to expand...
Click to collapse
Pull your battery, put it back in, hold the vol up and power until it loads up in recovery. Clean cache, then clean Dalvic cache(in Advanced Menu), Find the zip you want on your sd card install zip. It should boot into your new rom. The CWM repack you used is not the one I would have, but it probably is just the repack kernal and cant boot your phone.

byrdcfmma said:
Pull your battery, put it back in, hold the vol up and power until it loads up in recovery. Clean cache, then clean Dalvic cache(in Advanced Menu), Find the zip you want on your sd card install zip. It should boot into your new rom. The CWM repack you used is not the one I would have, but it probably is just the repack kernal and cant boot your phone.
Click to expand...
Click to collapse
Sweet! I'm figuring some things out now!
I actually had GB on the device. I got it from the factory yesterday. Apparently it had a higher OS on it. So I had to go put a GB kernel on it.
I couldn't find the one with CWM but this one has AGAT

HighSeraphim said:
Sweet! I'm figuring some things out now!
I actually had GB on the device. I got it from the factory yesterday. Apparently it had a higher OS on it. So I had to go put a GB kernel on it.
I couldn't find the one with CWM but this one has AGAT
Click to expand...
Click to collapse
once you get the phone set up, get Mobile Odin and keep this .tar files on your sd card. If I Mobile Odin back to this .tar then I can get a clean install on any new rom. this is the name of the file you are looking for, we have been requested not to provide direct links
StockCWM-EL26.tar.md5
If you phone boot loops again have thie zip as well. Pull batt, then press vol up and power to get to CWM recovery then clean and flash
EL26_StockCWM.zip
As you will see when you get more experienced, there is more than one way to skin the cat. This is what I do and it works every time.

byrdcfmma said:
once you get the phone set up, get Mobile Odin and keep this .tar files on your sd card. If I Mobile Odin back to this .tar then I can get a clean install on any new rom. this is the name of the file you are looking for, we have been requested not to provide direct links
StockCWM-EL26.tar.md5
If you phone boot loops again have thie zip as well. Pull batt, then press vol up and power to get to CWM recovery then clean and flash
EL26_StockCWM.zip
As you will see when you get more experienced, there is more than one way to skin the cat. This is what I do and it works every time.
Click to expand...
Click to collapse
That's great! Thank you!
I picked up the Stock EL26 loads.
To make sure I understand when you say that you can get a clean install on any new rom, you mean that you can install StockCWM-EL26 first and then throw the ROM on and it works right?
Also as a note, I have gotten the SuperNexus ROM running on my machine. I don't have 3G data yet. I'm still working on it. I installed the latest ICS modem and changed the xml file that was suggested. I then updated the permissions on the file to what the other files in the directory had and rebooted. Still nothing... I'm not sure if this is your wheel-house and you've already helped me tremendously! I'm digging around trying to find answers.
(I can't post on the SuperNexus dev forum yet. I'm going to look for a support forum or something to post on.)

HighSeraphim said:
That's great! Thank you!
I picked up the Stock EL26 loads.
To make sure I understand when you say that you can get a clean install on any new rom, you mean that you can install StockCWM-EL26 first and then throw the ROM on and it works right?
Also as a note, I have gotten the SuperNexus ROM running on my machine. I don't have 3G data yet. I'm still working on it. I installed the latest ICS modem and changed the xml file that was suggested. I then updated the permissions on the file to what the other files in the directory had and rebooted. Still nothing... I'm not sure if this is your wheel-house and you've already helped me tremendously! I'm digging around trying to find answers.
(I can't post on the SuperNexus dev forum yet. I'm going to look for a support forum or something to post on.)
Click to expand...
Click to collapse
First - Yes, when I want to change roms, I use mobile odin to flash the .tar EL26 CWM kernal. Pull Batt if needed and then Vol up and power to get to CWM. Then I follow the ROM developer's instructions. reboot and almost always get a good clean install.
Second - I use my phone all day for work so I dont mess with the AOSP Roms much. I like them a lot, but I cant have data/connection issues interfere with my lively-hood so I mostly stay on the TW side of things. Cant help you there, sorry...

HighSeraphim said:
That's great! Thank you!
I picked up the Stock EL26 loads.
To make sure I understand when you say that you can get a clean install on any new rom, you mean that you can install StockCWM-EL26 first and then throw the ROM on and it works right?
Also as a note, I have gotten the SuperNexus ROM running on my machine. I don't have 3G data yet. I'm still working on it. I installed the latest ICS modem and changed the xml file that was suggested. I then updated the permissions on the file to what the other files in the directory had and rebooted. Still nothing... I'm not sure if this is your wheel-house and you've already helped me tremendously! I'm digging around trying to find answers.
(I can't post on the SuperNexus dev forum yet. I'm going to look for a support forum or something to post on.)
Click to expand...
Click to collapse
In this step for SN, what rom did you get the xml from? "NAVIGATE TO system/etc and look for apns-conf.XML and delete it. Then grab one from another ROM that has working data then paste it into the same directory and fix permissions and reboot".
That might be the issue. You need to make sure that a) you have an ICS modem(FL24) is the latest, and make sure you're not flashing it through mobile Odin, it won't take, and b) you have a working apn-conf.xml file from a rom with working data. Dastin15's Wild For The Night is also 4.2.2, and last I checked, had working data. Might give that a go. Good luck!
Sent from my SPH-D710BST using xda premium