Develop Bugs

[Guide] How to recover your semi-brick

YES YOU NEED TO READ THIS WHOLE POST, PROB MORE THEN ONCE TO MAKE SURE YOU GOT IT. YES I KNOW HOW LONG IT IS, I TYPED IT!
the reason i call it a semi-brick is because a true brick can bot be recovered with out opening the case.
first go here and read this for info: http://forum.xda-developers.com/showthread.php?t=838484
now since your here im going to assume that its too late.
*things you will need.
copy of cwm recovery. get it here (the manual install link): http://forum.xda-developers.com/showpost.php?p=9145724&postcount=28
adb installed and working.
a known good rom, or nandroid backup. here is one: http://forum.xda-developers.com/showthread.php?t=836042 (use odex one)
a wpthis.ko for YOUR specfic kernel (run (adb shell cat /proc/version) that will tell you what kernel you have)
*first thing we need to know is, are you s-off or s-on now?
if your s-off just boot into clockwork mod recovery, wipe the phone and flash a known good rom and be done with it. if you dont have cwm recovery installed. boot into fastboot (vol down+power) you must have the sdk/adb installed and working, and type fastboot flash recovery LocationOfRecovery.img (where LocationOfRecovery.img= where you have the recovery, ie c:\android\recovery.img). once thats installed follow instructions above.
*if you are s-on:
will the phone boot into android? if so your not bad off.
if you want to unroot to return the phone, follow the unroot thread here: http://forum.xda-developers.com/showthread.php?t=835971
if you dont want to unroot then you have a couple of different options. if you have cwm recovery still installed, just follow instructions above and flash a known good rom. ive been told that boot.img (kernel) wont flash if you are s-on. the way to fix this (temporarily) is boot into recovery, but before you flash run these commands:
(put wpthis.ko in sdk folder)
adb remount
adb push wpthis.ko /data/local/wpthis.ko (specific for your kernel)
adb shell
# insmod /data/local/wpthis.ko (should get same function not implemented error as when u rooted first time)
then proceed to flash the rom. once booted into android skip down to, "now to get back to s-off"
*if you have stock or eng-recovery installed.
will the phone attempt to boot android at all? where is it stuck at?
a good min after it starts to try to boot, type these commands:
adb remount
adb shell
if you can get in shell then theres still hope. back out shell for a second and start here:
put the cwm recovery.img and wpthis.ko in your sdk folder
adb remount
adb push wpthis.ko /data/local/wpthis.ko (specific for your kernel)
adb push recovery.img /data/local/recovery.img
adb shell
# insmod /data/local/wpthis.ko (should get same function not implemented error as when u rooted first time)
# dd if=/data/local/recovery.img of=/dev/block/mmcblk0p21 (now wait a min or 2 to give it time to finish)
#sync (give it another min or to just to be safe)
#reboot recovery
at this point you should be in cwm recovery. follow instructions above for flashing with s-on.
*if you cannot get into shell while booting, but have eng-recovery installed, there might be some options.(however this is all theory)
boot into recovery-
if you are on linux using adb, you can try taking sh from /system/bin folder of any custom rom, chmod 0755 it, then push it to /system/bin and adb shell might work.
windows-
boot into recovery.
a system.img compatible with your installed kernel pushed may work. put the system.img into the sdk folder.
adb push system.img /data/block/mmcblk0p25
then reboot and see where you are. if that dont work, grab the modified miscnew.img here: http://www.4shared.com/file/pUPfrGi-/mmcblk0p17.html
rename it misc.img put it in sdk folder and
adb push misc.img /dev/block/mmcblk0p17
then reboot into bootloader with PC10IMG.zip on root of sdcard and it should run though. if it does your fully stock and get to start all over again.
*if you cannot get into shell, and you have stock recovery, im sorry your pretty screwed. as of right now the only thing thats gonna bring it back is a full img/update signed from htc thats equal to or higher then the version currently on the phone. (well and jtag of course)
*well now you've done one of the steps above. your booted into android, you have perm root, and cwm recovery installed, just still s-on. dont worry your almost there!
first take that wpthis.ko for you kernel and push it, and the eng hboot.
adb push wpthis.ko /data/local/
adb push hboot-eng.img /data/local
then from adb shell, or terminal root prompt:
# insmod /data/local/wpthis.ko (again you should get the function not implemented error)
NOW REMEMBER THIS NEXT STEP COULD MEAN DEATH FOR YOU G2 IF TYPED WRONG, AND AFTER ALL THIS HARD WORK!
# dd if=/data/local/hboot-eng.img of=/dev/block/mmcblk0p18
wait a few mins to be sure its done.
# sync
wait a few more just cause.
reboot, you should now be s-off, cwm recovery installed, and free to do whatever you want. just dont go screwing it up again
* as new methods are discovered, or ones here are proven wrong, i will update as necessary. as of the writing post, 2 devices that i know of have been saved!
good luck!
wpthis.ko for bacon bits.03 kernel: http://www.4shared.com/file/OAcd1bix/wpthis-263221-cyanogenmod.html

coby kyros mid8048-8 stucks on start up logo screen after rom update can anyone tall me what to do o thing to make a sdcard boot but i dont know how pls helppppp.tnks

[Q] Why can't I seem to root?

Hey! So I got my G2 from a member on here last night (woohoo!) but I can't seem to root it. I tried every method on here including visionary and gfree. I had some success with gfree since I was able to sim unlock it. When in bootloader I get 's-off' on the first line. But when I go into Rom Manager it tells me I'm not rooted and when I type 'su' into terminal I get 'suermission denied'. Any help here? I really need to flash a new ROM due to ORD.
And just some info from System Info in the boot loader even though I think it's not needed here.
OS ver.-1.22.531.8
eMMC- unknown 2151MB 4407295sectors
Also under IMAGE CRC
hboot: 0x6570c0db
boot: 0x1b87420d
recovery: 0xd4af6ad9
system 0x9f52fea6

Any Update???

OK so you were able to get S-OFF via gfree but not permanent root, when you followed the gfree method, the last step (before the verify) of the gfree rooting guide on the wiki (not sure if that's the one you used) has you run a command to "lock in" root:
You now have read-write access to your /system, hboot, and recovery partitions. But you still need to "lock in" root, and give you 'su' access in the future. So just do:
Code:
# /data/local/tmp/root
# sync
Click to expand...
Click to collapse
I suspect this is where it went wrong.
You should be able to use the same method again to get perm root, just skip the gfree parts. Summary:
1. Get all the files on your phone (they are probably already there)
2. Get temp root using rage
3. Run the command (script) that I listed above
Link to the full instructions: http://forum.xda-developers.com/wiki/index.php?title=HTC_Vision#How_To_Get_R.2FW_Access_.28Permanent_Root_.2F_.22Permaroot.22.29

I tried the wiki method three times, making sure I typed everything correctly. After I type the line you put up I get a series on lines that show that some files can't be shown (I dont remember the exact ones off the top of my head, I'll redo it soon so I can tell you which ones). I also tried it with two different SD cards.
SO I found the errors in another thread started today:
Code:
/data/local/tmp/root
mkdir failed for /system/xbin, File exists
cp: can't stat '/system/xbin/busybox': Not a directory
Unable to chmod /system/xbin/busybox: Not a directory
/data/local/tmp/root: /system/xbin/busybox: not found
cp: not found
cp: not found
Unable to chmod /system/bin/su: No such file or directory

Strange, /data/local/tmp/root is just a script that does all of the stuff to get you permanent root, not sure why it shouldn't be working for you.
I think once you are temp rooted you should be able to install CWM recovery and use that to install a new (pre-rooted) ROM. If you are not ready to or don't want to jump into a custom ROM you can load the stock pre-rooted ROM and should not even have to wipe (would advise a nandroid backup of course)
http://forum.xda-developers.com/showthread.php?t=836042

raitchison said:
Strange, /data/local/tmp/root is just a script that does all of the stuff to get you permanent root, not sure why it shouldn't be working for you.
I think once you are temp rooted you should be able to install CWM recovery and use that to install a new (pre-rooted) ROM. If you are not ready to or don't want to jump into a custom ROM you can load the stock pre-rooted ROM and should not even have to wipe (would advise a nandroid backup of course)
http://forum.xda-developers.com/showthread.php?t=836042
Click to expand...
Click to collapse
I should try temprooting again and flashing CWM. And The only reason I want to root is to flash custom roms. lol.
EDIT: Well that didn't help. I followed the guide for temproot. I did get the root prompt (#) in terminal, but when testing with 'su' gives me 'su:not found'. And CWM still tells me I'm not rooted and wont let me flash the recovery.

Try using visionary to temp root, that may yield more success.
You may want to use ADB to pull out the remnants from your previous attempts.
If you have # in the terminal you should not need to su.
If you can't flash CWM using ROM manager try this method instead http://forum.xda-developers.com/showthread.php?t=902493

With visionary I push temp root, it makes me wait for like 10 minutes, and does nothing. I was just doing su to see what it does. I'll try removing everything with adb and redownloading all the files. Anyway, what's the command to remove with adb? lol

Open an ADB shell and use the rm command to remove individual files, I would remove everything you ADB pushed originally.
Code:
rm /sdcard/su
rm /sdcard/Superuser.apk
rm /data/local/tmp/rage
rm /data/local/tmp/busybox
rm /data/local/tmp/root
Will only run if you have root access (a # prompt) and you may get errors with some since clearly something isn't as it should be on your system.
Did you try using the flash_image utility to flash CWM?
Also if you can flash the engineering hboot you should be able to load CWM from fastboot.

So I removed the files, redownloaded, and redid the wiki root method.
Still no luck. Same error as posted before. This is getting on my nerves. lol

Did you try to install recovery using this method?
If that didn't work did you try to install the engineering HBOOT?

raitchison said:
Did you try to install recovery using this method?
If that didn't work did you try to install the engineering HBOOT?
Click to expand...
Click to collapse
I will attempt these methods soon and report back.

[GUIDE][ROOT] Blu Dash 3.5 d170 - Help with recovery and root

Update: New guide is in post # 122
http://forum.xda-developers.com/showthread.php?p=40433602#post40433602
The guide is in post # 98
http://forum.xda-developers.com/showthread.php?p=39362805#post39362805
Hello,
I have a Blu Dash 3.5 and would like to install clockworkmod recovery and enable root access, but so far have not found anything. Could you help me?
thank you

I tried using SuperOneClick, Gingerbreak, zroot but all without success.
Anyone have any other option?

_ _

I managed to set up the android SDK on ubuntu but I get permission denied message when trying to copy the files to the /system
I suppose I have to remount the partition in RW to be able to put the files but no idea how to do this.

_ _

fenrixarena said:
Well you can't without it being rooted, right now I just don't care about it anymore it's just a phone, & $30 isn't worth just freeing up some space. No guarantee that will make it run smoother without crashes either, that could just be a result of interface, so a bit of speed don't seem worth it to me, I have my own ringtones with ringdroid so I'm happy.
Everything having to do with extracting the boot.img requires it to be rooted otherwise I know enough about enough crapola already I could make that all spiffy and zabam if I wanted. I would just literally edit all the img files and provide a simple update.zip given I could get signing to work!
unfortunately I get nothing from fastboot at all, not sure it would help though. oem unlock stuff is all I recall about that besides it being a great wau to flash images to the phone
let me know if you make any progress, I'll put in my effort if you do anything at all that intices me to find a path to progress
Click to expand...
Click to collapse
fenrixarena, hope you get to find any progress on rooting this phone. I also agree with you that it is no worth the time or effort with this kind of phone but I think that the challenge is interesting . In my case I have no idea on how you may root it but I am sure it is possible i guess it all in find another compatible boot.img that can be rooted, right?
Regards,

- -

_ _

What is the address of the site that charges $ 30? We can verify that other users would like to do and split the cost ...

I managed to make root ...
I found the CWM recovery and stock recovery for Qsmart.
I was very curious if it would work in BLU and ended up installing the CWM with fastboot. It did not work, the screen just stays with the BLU and not access the recovery.
Then I installed stock recovery and did not work ...
But I realized that Windows recognized the device connected and I recognized two units with unsupported format.
then returned to the prompt and saw that the ADB was working. I used the command 'adb shell' and to my surprise was how the cursor #
So without wasting time already put su and busybox in /system/ bin and superuser.apk in /system/app, I changed the permissions and restarted the phone. And the root was working perfectly. :victory:
Only one problem, I do not have the recovery installed.
I wonder how I can help you to make root without losing recovery

>>

I use Windowns 7 Pro x64 bits.
I installed the drivers in the SuperOneClick version 2.3.3.
With the drivers installed could use fastboot and adb command.
Turning on the phone + vol - access mode fastboot / bootloader
It would be good to get root without losing the recovery. Because we need him to compile a clockworkmod recovery.
I used the romdump and got the following files:
https://docs.google.com/file/d/0B5rQL4bfhfPRZXhhZkg1Mkx5SHc/edit?usp=sharing
I used the mkfs.yaffs2 to convert the file system.tar for system.img
https://docs.google.com/file/d/0B5rQL4bfhfPRMGdaNnQ4b1RwclU/edit?usp=sharing
This system.img would function on another device?

okay, I am having one problem, what did you type for the permissions?
I've got superuser.apk pushed and the su in the /system/bin but when i try to chmod 777 it returns to -r- after I reboot!
Here's howto manually back up now that I have recovery adb root:
cat /proc/mtd
Then just cat (mtd#) > /sdcard/(image.img)
You can restore via fastboot flash

fenrixarena said:
okay, I am having one problem, what did you type for the permissions?
I've got superuser.apk pushed and the su in the /system/bin but when i try to chmod 777 it returns to -r- after I reboot!
Here's howto manually back up now that I have recovery adb root:
cat /proc/mtd
Then just cat (mtd#) > /sdcard/(image.img)
You can restore via fastboot flash
Click to expand...
Click to collapse
you get root access in adb shell?
send su to /system/bin with permission 6755.
busybox to /system/bin with permission 755.
and superuser.apk to /system/app with 644.
reboot your phone
then download terminal emulator on your phone and enter the command su
if the cursor change to # worked

erickreisbr said:
you get root access in adb shell?
send su to /system/bin with permission 6755.
busybox to /system/bin with permission 755.
and superuser.apk to /system/app with 644.
reboot your phone
then download terminal emulator on your phone and enter the command su
if the cursor change to # worked
Click to expand...
Click to collapse
These are actually good news... Right on!!! Cheers if you manage to root Blu Dash 3.5 :victory:
Can someone guide me on how I can Root my phone? What adb tools do i need?
Regards

az0ik said:
These are actually good news... Right on!!! Cheers if you manage to root Blu Dash 3.5 :victory:
Can someone guide me on how I can Root my phone? What adb tools do i need?
Regards
Click to expand...
Click to collapse
I can upload the cwm.img & adb I used + fastboot. Not all adb.exe will recognize the phone. Also drivers from qsmart for adb bridge.
1 boot holding vol down + power (about 15 sec.)
Fastboot flash recovery cwm.img
Then turn phone off.
Boot holding vol UP + Power (about 15 sec)
Adb push su /system/bin
Adb push busybox /system/bin
Adb push superuser.apk /system/app
adb shell
~# chmod 6755 /system/bin/su
~# chmod 755 /system/bin/busybox
~# chmod 644 /system/app/superuser.apk
reboot your phone
terminal emulator - su
permission granted
IT WORKED!
---------- Post added at 02:21 AM ---------- Previous post was at 02:00 AM ----------
sorry, tomorrow I will upload a zip with the img i used and so forth all in one zip so you can root with that, unless it's here by someone else by then I gotta work!

fenrixarena said:
I can upload the cwm.img & adb I used + fastboot. Not all adb.exe will recognize the phone. Also drivers from qsmart for adb bridge.
1 boot holding vol down + power (about 15 sec.)
Fastboot flash recovery cwm.img
Then turn phone off.
Boot holding vol UP + Power (about 15 sec)
Adb push su /system/bin
Adb push busybox /system/bin
Adb push superuser.apk /system/app
adb shell
~# chmod 6755 /system/bin/su
~# chmod 755 /system/bin/busybox
~# chmod 644 /system/app/superuser.apk
reboot your phone
terminal emulator - su
permission granted
IT WORKED!
---------- Post added at 02:21 AM ---------- Previous post was at 02:00 AM ----------
sorry, tomorrow I will upload a zip with the img i used and so forth all in one zip so you can root with that, unless it's here by someone else by then I gotta work!
Click to expand...
Click to collapse
Thank you so much Fenrixarena!! You are awesome :good::good::good:. I still can believe it, i thought it was a lost hope... I really appreciate for uploading the files I am patient enough to wait another day

Follow the ADB and the recovery I've used.
The drivers installed by SuperOneClick, but have these here:
32 bits - http://www.mediafire.com/?21na032gnzbfza2
64 bits - http://www.mediafire.com/?1hrwo325cb1ej2w

Fx

fenrixarena said:
interesting, I got a cwm4s12.img that's larger(4.51) and because of having a 64bit laptop without 32bit support I had to use a smaller ADB (158kb) to be able to recognize the phone and only on regular usb debugging does superoneclick install drivers which was useless since I needed the drivers to work in recovery.
If those files don't work for you I will upload mine
I got my files from foreign thread, and since I download so many versions and custom versions of programs like adb I'm not sure where it came from !!
oh, and he rooted the phone first, I only did it on a more bothersome platform.
Click to expand...
Click to collapse
the root worked on your phone?
Now we need a recovery. I'm trying to learn how to compile cwm, but it is very complicated.

Need help

so i really need help rooting my htc one vx! im following the tutorial here http://forum.xda-developers.com/showthread.php?t=2203225 but the thing is when i enter recovery mode i get teh red triangle. how do i fix this? please help iv tried other methods but none have worked i really want to have my phone rooted.

To Root HTC One VX
LordXombie said:
so i really need help rooting my htc one vx! im following the tutorial here http://forum.xda-developers.com/showthread.php?t=2203225 but the thing is when i enter recovery mode i get teh red triangle. how do i fix this? please help iv tried other methods but none have worked i really want to have my phone rooted.
Click to expand...
Click to collapse
First Unlock Bootloader And Then Root. :silly:

i have unlocked the phone. but it will not allow me to access the bootloader unless threw other means. while in the bootloader it says tampered followed by unlocked. i cannot seem to figure out what is going on.

How to root htc one vx
HTC One VX comes from the
HTC One series of
smartphones consisting of
high-end specifications, such
as Dual-Core processors and
the latest version of Android
on-board. While we already
have a root guide for the
One VX, another root
method has popped-up on
XDA and to help users root
their devices with this new
method, here we’re
presenting a tutorial
explaining everything you
need to root your device.
So, let’s see how you can
root your HTC One VX
smartphone.
I. Before You Begin:
1. This will void the warranty
of the device. However, you
can reinstate it by unrooting
the device if there’s any
unrooting procedure
available.
2. The following procedure
works on Windows based
PCs only.
II. Downloading
Required Files:
download file. http://forum.xda-developers.com/showthread.php?t=2123359
III. Rooting the HTC
One VX:
1. Place the Root Package
archive on the Desktop of
your PC.
2. Extract files from the
archive to your Desktop.
Don’t launch any files just
yet.
3. Turn ON the USB
debugging option on your
device by heading to
Menu>>Settings>>Developer
options>>USB debugging .
4. Turn OFF the device.
5. Reboot the device into
Fastboot mode. To do so,
simply hold down the
Volume DOWN+Power
buttons together.
6. Once inside the Fastboot
mode, connect the device to
your PC using the USB cable.
7. Open a Command Prompt
Window on your Desktop. To
do that, hold down the Shift
button on your keyboard
and right-click on any empty
area on the screen, then
select Open command
window here .
8. Type in following
command into the Command
Prompt Window:
fastboot flash boot boot.img
9. Once it’s done, issue the
following command:
fastboot reboot
10. Your device will reboot.
Once it boots up, enter the
following command:
adb remount
11. Next, enter following
commands into the
Command Prompt Window
one-by-one. Press ENTER
after each line you type:
adb push Superuser.apk /system/app/
adb push su /system/xbin/
adb shell mkdir /system/bin/.ext
adb push .su /system/bin/.ext/
adb shell chmod 6755 /system/xbin/su
adb shell chmod 6755 /system/bin/.ext/.su
adb shell chmod 777 /system/bin/.ext
adb shell ln -s /system/xbin/su /system/bin/su
adb reboot
12. Your device will reboot
in normal mode.
13. Once it boots up, simply
open the Superuser app
from your App Drawer.
14. Tap the Update binaries
button in the app and let it
do the rest of the work.
15. And you’re all done!
Brilliant! Your device has
been successfully rooted and
the SU binaries have also
been updated. Now load-up
some root-only apps on
your device to realize the
power of root-access!

Achieving root on Xperia Z1 - 14.6.A.1.216

After dabbling around in some murky waters trying to achieve root, and going trough some 2010 stuff I did, I did discover a method I devised back then works to some extent, strangely.
Using fastboot (boot) to a TWRP recovery image (TWRP_v2.8.6.0_honami-f2fs_from_cm12.1_150423.img), mounting /system, and pushing a version of busybox, bash and using the supersu su binary already in the TWRP recovery image.
boot-new.img.bz2.zip (rename to boot-new.img.bz2 before extracting -.Just TWRP_v2.8.6.0_honami, with a different kernel and dt image included to boot from fastboot)
bash and busybox i compiled from git and debian sources yesterday/today
Basically this; (use only for reference.)
Code:
# Magically push all files in place here.
# Optionally, move /system/bin/sh out of the way and link /system/bin/sh to bash
./"$ADB" shell "chmod 755 /system/bin/bash && chown 0.0 /system/bin/bash"
./"$ADB" shell "chmod 4755 /system/bin/busybox && chown 0.0 /system/bin/busybox"
# TWRP
#./"$ADB" shell "cp /supersu/su /system/bin/_su"
./"$ADB" shell "cp /supersu/su /system/bin/su"
./"$ADB" shell "cp /supersu/supolicy /supersu/su /system/xbin"
./"$ADB" shell "cp /supersu/libsupol.so /system/lib/"
./"$ADB" shell "chmod 0644 /system/lib/libsupol.so && chown 0.0 /system/lib/libsupol.so"
./"$ADB" shell "cp -r /supersu /system/app/SuperSU"
./"$ADB" shell "chmod 0755 /system/app/SuperSU && chown 0.0 /system/app/SuperSU && chmod 0644 /system/app/SuperSU/SuperSU.apk"
#
#./"$ADB" shell "chmod 4755 /system/bin/_su && chown 0.0 /system/bin/_su"
#./"$ADB" shell "echo "busybox su -c "_su"" > /system/bin/su" # or busybox su -c "_su -c /system/bin/sh-org"
./"$ADB" shell "chmod 4755 /system/bin/su /system/xbin/su* && chown 0.0 /system/bin/su system/xbin/su*"
# Quite dangerous - Suggest moving passwd when in normal use
./"$ADB" shell "echo "root::0:0:0:/root:/system/bin/sh" > /system/etc/passwd"
./"$ADB" shell "chmod 0644 /system/etc/passwd"
Next step, to remount /system with write permissions from a normal boot, I think, would be to modify boot.img/default.prop and set "ro.secure=0"
Thought I had done this prior, I run with touch disabled as I cracked my screen (impressively massive drop of at least 30 cm! - onto object.. ) ... I could not remount system when I first tried.
Notes:
If i adb in early i can use supersu/su to gain root, when system is loaded busybox su -c ""supersu/"su" works. - NO AUTH

Hm, updated SuperSU via google play and suddenly it realized it was rooted . = ) Still keeping the supersu/su intact in /system/*bin

Thankfully I've been unsuccessful in grabbing root from /data/local/tmp this way as of now. Seems the permissions are reset. Though getting root without any auth is a serious matter no matter how you flip the coin. At least it's not as easy as pushing an archive to /data/local/tmp and running busybox su -c su. Also with a modified busybox you could easily skip the part where I write a /etc/passwd with no password.. Incredibly handy if you need root without Android running, say with setprop ctl.stop zygote, media and bootanim. But incredibly dangerous!

Fastboot to attached TWRP and install [STABLE][2016.02.02] SuperSU v2.65 - http://forum.xda-developers.com/showthread.php?t=1538053 - drop the zip to somewhere on the device and use the install function, i installed supersu via google play first. Attached is the kernel image i'm using. On a side-note, the script above failed .
Apart from this, the attached gnu-tools i will have to update... Got a neon flags optimized for out cpu and all, but that's for a different day.
Cheers, have a good one mates

Noob question: what is the difference between using this method for root and kingroot method? Which is better to use?

I've not checked Kingroot. But my thought is not to rely on nasty kernel exploits and have an as clean as possible root. Kingroot was not working when i first started this post. Also i dont leave system read write mountable. To do system modification i fastboot the TWRP image

threader said:
I've not checked Kingroot. But my thought is not to rely on nasty kernel exploits and have an as clean as possible root. Kingroot was not working when i first started this post. Also i dont leave system read write mountable. To do system modification i fastboot the TWRP image
Click to expand...
Click to collapse
Kingroot give you root but not supported and their binary are weired but when you replace it with supersu you can't mount system read/write cause of ric but thanks to Chainfire and his tools I find way to root with kingroot and replace it by supersu and disable ric

Noticed my boot img was rebooting sometimes, went off and updated my compiler toolchain and had a look at the kernel and recent developments.
Had a look at X-Honami v6 and ported some parts of that effort to the latter Sony kernel used in 14.6.a.1.216.
* Messed around with memutils and implemented ARM_PLD_64BYTE and USE_LDRDSTRD_OVER_LDMSTM atop memutils from the Xperia-dev unified kernel. - this needs some testing but appears to be stable at least with the options turned on.
* Slight overclock of GPU to 533 mhz, and underclock to 27 mhz on idle.
* Has kexec hardboot
I cannot busybox su -c su with this kernel. Which is only useful for developers anyway. You'd be wise in running some benchmarks before and after the flash.
Kernel needs to be flashed via fastboot.
Source:
https://github.com/threader/kernel-copyleft-14.6.A.1.xxx-backports/

DectonX said:
Kingroot give you root but not supported and their binary are weired but when you replace it with supersu you can't mount system read/write cause of ric but thanks to Chainfire and his tools I find way to root with kingroot and replace it by supersu and disable ric
Click to expand...
Click to collapse
I have rooted my phone with king root , downloaded SuperSU-ME-PRO_9.3.8 to replace kingroot with supersu but the app stucks in middle while processing data. Can you please help me with the following things:
1. Which chainfire apk to use to replace kingroot with supersu (kingroot ver is 4.9.2)
2. I need to install Xposed framework, for which i belive i need to flash a recovery. As i am on stock based kernel and rom can you help me which recovery should i flash and further steps to get the xposed framework in my xperia z1 (5.1.1)

VikasG09 said:
I have rooted my phone with king root , downloaded SuperSU-ME-PRO_9.3.8 to replace kingroot with supersu but the app stucks in middle while processing data. Can you please help me with the following things:
1. Which chainfire apk to use to replace kingroot with supersu (kingroot ver is 4.9.2)
2. I need to install Xposed framework, for which i belive i need to flash a recovery. As i am on stock based kernel and rom can you help me which recovery should i flash and further steps to get the xposed framework in my xperia z1 (5.1.1)
Click to expand...
Click to collapse
Ok i have done step #1 by manually updating supersu and it deleted the kingroot by itself. Now i need answer for #2 only, Which recovery should i install in stock based rom ?

VikasG09 said:
I have rooted my phone with king root , downloaded SuperSU-ME-PRO_9.3.8 to replace kingroot with supersu but the app stucks in middle while processing data. Can you please help me with the following things:
1. Which chainfire apk to use to replace kingroot with supersu (kingroot ver is 4.9.2)
2. I need to install Xposed framework, for which i belive i need to flash a recovery. As i am on stock based kernel and rom can you help me which recovery should i flash and further steps to get the xposed framework in my xperia z1 (5.1.1)
Click to expand...
Click to collapse
long steps but 100% works
1. Download kingroot and root your phone
2.Download replace kingroot with SuperSU and extract it to internal memory
3.Download XZDual Recovery for your phone
4.Download Terminal emulator for play store
5.Download FlashFire by Chainfire from play store
6.Download SuperSU zip package
what you will do
1. Get root using kingroot
2.open terminal and write
Code:
su
sh /sdcard/mrw/root.sh
3. it will open SuperSU.... press update manual
warn : Don't click Reboot, if you rebooted phone ric will work and you will not have access to system partition
4. open FlashFire and grant SuperSU then press on lighting button
5. choose XZDual Recovery zip file and tick auto remount and press on flash or lighting button
black screen will apear preparing files and flash it then phone will reboot
6. when you see the green led press vol down to enter TWRP
7. flash SuperSU package
Note : if there is bootloop , enter recovery and go to setting> fix premission
and reboot
now you have SuperSU working 100%
Notes : no recovery will bring you xposed.... just try to open Xposed thread and download the package for your SDK
the recovery i use is XZDual Recovery from [NuT] it's very good for locked bootloaders
hit thanks if helped

DectonX said:
long steps but 100% works
1. Download kingroot and root your phone
2.Download replace kingroot with SuperSU and extract it to internal memory
3.Download XZDual Recovery for your phone
4.Download Terminal emulator for play store
5.Download FlashFire by Chainfire from play store
6.Download SuperSU zip package
what you will do
1. Get root using kingroot
2.open terminal and write
Code:
su
sh /sdcard/mrw/root.sh
3. it will open SuperSU.... press update manual
warn : Don't click Reboot, if you rebooted phone ric will work and you will not have access to system partition
4. open FlashFire and grant SuperSU then press on lighting button
5. choose XZDual Recovery zip file and tick auto remount and press on flash or lighting button
black screen will apear preparing files and flash it then phone will reboot
6. when you see the green led press vol down to enter TWRP
7. flash SuperSU package
Note : if there is bootloop , enter recovery and go to setting> fix premission
and reboot
now you have SuperSU working 100%
Notes : no recovery will bring you xposed.... just try to open Xposed thread and download the package for your SDK
the recovery i use is XZDual Recovery from [NuT] it's very good for locked bootloaders
hit thanks if helped
Click to expand...
Click to collapse
Thanks a lot..

I still suggest using the fastboot method with the TWRP boot image attached in the first post, mount the system partition, select install Zip SuperSu, forum.xda-developers.com/showthread.php?t=1538053 .
Cheers
I've got a kernel-copyleft-14.6.A.1.xxx to finish up and officially forum post ; ) https://github.com/threader/kernel-copyleft-14.6.A.1.xxx-backports/ . And update and official post might come this week. Been running this for months now and its stable, and fast, whee.
VikasG09 said:
Thanks a lot..
Click to expand...
Click to collapse

threader said:
I still suggest using the fastboot method with the TWRP boot image attached in the first post, mount the system partition, select install Zip SuperSu, forum.xda-developers.com/showthread.php?t=1538053 .
Cheers
I've got a kernel-copyleft-14.6.A.1.xxx to finish up and officially forum post ; ) https://github.com/threader/kernel-copyleft-14.6.A.1.xxx-backports/ . And update and official post might come this week. Been running this for months now and its stable, and fast, whee.
Click to expand...
Click to collapse
I just used kingroot, unlocked bootloader, flashed dual recovery, flashed prerooted Rom. That's it. Easy as pie.
Sent from my D5503 using Tapatalk