Develop Bugs

[RECOVERY] Odin Flashable ClockworkMod Recovery Images

I am a MadTeam developer and I recently acquired this phone. I noticed that there weren't any Odin flashable ClockworkMod recoveries of the latest versions for this device, so I made my own and decided to share with you guys. This possibly may be helpful for new comers and also for people who may want to update their recoveries to touch recoveries without having to purchase the pro version of ROM Manager. I'll be sure to keep this thread up-to-date.
These are based off of the official ClockworkMod recovery images available at http://www.clockworkmod.com with no changes whatsoever.
ClockworkMod Recovery v6.0.1.5: http://www.mediafire.com/?wjm90gwjcvg4ccc
ClockworkMod Touch Recovery v6.0.1.5: http://www.mediafire.com/?bpr3dd11747zgcc
Flashing Instructions:
1. Open up Odin3 v1.85. Make sure only the "Auto Reboot" and "F. Reset Time" boxes are checked and nothing else.
2. Connect your phone to the computer in Download Mode. Odin should now detect your phone.
3. Select the PDA button and navigate to the desired recovery tar.
4. Press the "Start" button. It will now flash the updated recovery to your device. Your device will reboot upon completion.

Reserved.

Thanks, now when we say, Odin flash CWM, we can speak of flashing the latest one instead of the old 5.xx!

Thank you for doing this. I'm sure it will help some people out.

F. Reset Time
What does "F. Reset Time" do and is this required?

racer321 said:
What does "F. Reset Time" do and is this required?
Click to expand...
Click to collapse
Honestly not sure if needed but I've always had it checked and nothing bad had happened.

I stall out on flashing recovery image. Here's what I get. I'm using a tar where I manually swapped in the recovery image on my own.
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
Click to expand...
Click to collapse
And it just stalls. The screen of the phone appears as if nothing happened. I don't see the progress bar or anything.
Odin shows the first blue bar of the progress bar but it never goes beyond that.
Any help?
EDIT - it worked fine using one of the tars from this thread. So what am I doing wrong when substituting a recovery image on my own?

Hey thanks mate.
I tried flashing the latest TCWM via Rom Manager, and I guess the download got interrupted and it had a bad flash.
Ah well, not a big deal, but you saved me from having to go back to stock to unbrick it.

thanks for this its awesome to be updated and when i need it i will report lol

Is anyone making these for twrp?

Phateless said:
Is anyone making these for twrp?
Click to expand...
Click to collapse
TWRP already releases Odin flashables on the website.
http://techerrata.com/browse/twrp2/hercules

meekrawb said:
TWRP already releases Odin flashables on the website.
http://techerrata.com/browse/twrp2/hercules
Click to expand...
Click to collapse
I had no idea, but that's pretty awesome.

ClockworkMod Recovery for Galaxy S4 Active (int'l)[Unofficial]

---------------------Warning!-----------------------------------------
This CWM recovery is for SGS4A (int'l) ONLY. Does not work on SGS4 from AT&T as it has a locked bootloader.
Please refer to this thread for a bounty on the bootloader.
---------------------Instructions for flash with ODIN---------
Download ODIN 3.09 from here.
Download CWM recovery from here.
Extract the zip so you have the file CWM-Recovery-gt-i9295_v1-2.tar.md5.
Restart your phone while holding the Volume Down button as the phone is booting.
Press the Volume Up button to continue past the warning.
With the phone attached to your computer open ODIN and press AP.
Choose CWM-Recovery-gt-i9295_v1-2.tar.md5 and press start.
Reboot system
If you already have another version of CWM recovery installed, you can alternatively download CWM-Recovery-gt-i9295_v1-2_zipFLASH.zip and flash it through CWM recovery.
As always, I take no responsibility in case your phone blows up.

When im right, and you had a custom recovery from chainfires Auto-Root, you can flash my flashable zip. It makes it mouch easier. I cant test it, but i mean it sould work.
Download

hanspampel said:
When im right, and you had a custom recovery from chainfires Auto-Root, you can flash my flashable zip. It makes it mouch easier. I cant test it, but i mean it sould work.
Download
Click to expand...
Click to collapse
I'm sorry,but I'm not sure what you're saying... What zip? What is easier?
EDIT: Ah, now I think I get your post. You might be able to flash with the twrp manager, but the twrp recovery UI itself doesn't work, which is why we need to flash cwm in the first place.

I think this is a recovery. I made flashable Zip of yours/this. So you can flash it through the recovery which you get from auto root. Or did the recovery from auto root doesnt work? If not, forget what i post.:silly:

hanspampel said:
I think this is a recovery. I made flashable Zip of yours/this. So you can flash it through the recovery which you get from auto root. Or did the recovery from auto root doesnt work? If not, forget what i post.:silly:
Click to expand...
Click to collapse
*Now* I understand. Yes that makes sense. I haven't tested though . Busy trying to get cm10 to work

hanspampel said:
I think this is a recovery. I made flashable Zip of yours/this. So you can flash it through the recovery which you get from auto root. Or did the recovery from auto root doesnt work? If not, forget what i post.:silly:
Click to expand...
Click to collapse
CF-Auto-Root included not an Custom Recovery for installing ZIPs or so.
You can make a tar for flashing over Odin!? But not with a ZIP .... if the CWM works... you can flash newer version over the cwm!
I have made on tar for flashing over Odin... untested!!! I wait for my deveice so i can not test it!
Its the Recovery from Thread Opener!
@LeJay from where you got this Recovery?
Unpack the ZIP once.. then but it in Odin to PDA and flash it!
MPORTANT: Flash this file at your own risk. I or the XDA assume NO responsibility for any failed flashes or bricked phones.

Darkman said:
CF-Auto-Root included not an Custom Recovery for installing ZIPs or so.
You can make a tar for flashing over Odin!? But not with a ZIP .... if the CWM works... you can flash newer version over the cwm!
I have made on tar for flashing over Odin... untested!!! I wait for my deveice so i can not test it!
Its the Recovery from Thread Opener!
@LeJay from where you got this Recovery?
Unpack the ZIP once.. then but it in Odin to PDA and flash it!
MPORTANT: Flash this file at your own risk. I or the XDA assume NO responsibility for any failed flashes or bricked phones.
Click to expand...
Click to collapse
Compiled it myself. Kernel is the prebuilt from stock. It's a bit hackish, but it does the job while I try to get CM running.

Can I flash the zip using flash gordon ?

Im rooted the activeroot wat by geohot

This Is only for the international version. The at&t version has a locked bootloader
Sent from my GT-I9295 using xda premium

Have someone tried to flash ROMs from i9505 with this recovery?
Thank you.
---------- Post added at 04:43 PM ---------- Previous post was at 04:02 PM ----------
Darkman said:
I have made on tar for flashing over Odin... untested!!! I wait for my deveice so i can not test it!
MPORTANT: Flash this file at your own risk. I or the XDA assume NO responsibility for any failed flashes or bricked phones.
Click to expand...
Click to collapse
Tested, it works.
---------- Post added at 04:50 PM ---------- Previous post was at 04:43 PM ----------
LeJay said:
So, it's a little buggy but at least it gets the job done in case anyone wants to play with roms. The screen only updates for every second key press, but with a little care you can navigate around. Backup, restore and zip flash works fine. Only fat on external sd card.
It's a little hacky, but works. Although, please don't yell at me if anything goes wrong with your phone. This is baby steps towards custom roms. If you don't know what you're doing stay away from this.
Click to expand...
Click to collapse
Have you been able to mount SD Card? Mine just don't want to.

NetS said:
Have someone tried to flash ROMs from i9505 with this recovery?
Thank you.
---------- Post added at 04:43 PM ---------- Previous post was at 04:02 PM ----------
Tested, it works.
---------- Post added at 04:50 PM ---------- Previous post was at 04:43 PM ----------
Have you been able to mount SD Card? Mine just don't want to.
Click to expand...
Click to collapse
It doesn't work with exfat, which I think is samsungs standard if you format on device.
I have flashed different roms but they all suffer from black screens. Need to recompile with the proper kernel. I've been trying to get cm10 working with the kernel from samsung, but I'm running into problems. Not that experienced with this, so progress is a little slow as I figure out how these things work.

Darkman said:
CF-Auto-Root included not an Custom Recovery for installing ZIPs or so.
You can make a tar for flashing over Odin!? But not with a ZIP .... if the CWM works... you can flash newer version over the cwm!
I have made on tar for flashing over Odin... untested!!! I wait for my deveice so i can not test it!
Its the Recovery from Thread Opener!
@LeJay from where you got this Recovery?
Unpack the ZIP once.. then but it in Odin to PDA and flash it!
MPORTANT: Flash this file at your own risk. I or the XDA assume NO responsibility for any failed flashes or bricked phones.
Click to expand...
Click to collapse
Flash with odin works...
BUT, I can't get into recovery. still black screen.
Can you help please?
THX!

DannySchaukens said:
Flash with odin works...
BUT, I can't get into recovery. still black screen.
Can you help please?
THX!
Click to expand...
Click to collapse
Did you download zip from post #6?
I did, flashed with Odin 3.07, pressed Vol+, Home and power for several seconds and everything works like a charm.

NetS said:
Did you download zip from post #6?
I did, flashed with Odin 3.07, pressed Vol+, Home and power for several seconds and everything works like a charm.
Click to expand...
Click to collapse
Yes, I did that.
with odin3 3.0.7
Do I have to root the rom first?
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Recovery-CWM-Beta-I9295.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> recovery.img
<ID:0/008> NAND Write Start!!
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Removed!!

DannySchaukens said:
Yes, I did that.
with odin3 3.0.7
Do I have to root the rom first?
Click to expand...
Click to collapse
I didn't root the device, CWM offers to root it if you need.
I have no idea why it doesn't work for you, may be there are several modifications of i9295 with different display parameters.

Recompiled CWM with kernel sources. Should work a lot better with proper adb support and no issues with the user interface.

LeJay said:
Recompiled CWM with kernel sources. Should work a lot better with proper adb support and no issues with the user interface.
Click to expand...
Click to collapse
When I try to flash the 1.1 Odin version it fails each time for me - I have redownloaded a couple of times:
<OSM> MD5 hash value is invalid
<OSM> CWM-Recovery-gt-i9295_v1-1_ODIN.tar.md5 is invalid.
<OSM> End...

apd said:
When I try to flash the 1.1 Odin version it fails each time for me - I have redownloaded a couple of times:
<OSM> MD5 hash value is invalid
<OSM> CWM-Recovery-gt-i9295_v1-1_ODIN.tar.md5 is invalid.
<OSM> End...
Click to expand...
Click to collapse
Whoops. Changing the file named screwed with the md5. Try again.

LeJay said:
Whoops. Changing the file named screwed with the md5. Try again.
Click to expand...
Click to collapse
That worked. User interface now works. Still getting "warning no file_contexts" error. Is that a problem?
Also, when you go to reboot, you get the warning about the system trying to reflash stock recovery. If you select "Go Back" It still reboots for some reason.
Thanks for all your hard work.

[UPDATED 9/27] [ODIN] MetroPCS - M919N (UVUAMF2) STOCK ODIN Flashable

Hey there,
I know some people have been requesting this for quite some time! This couldn't have been possible without @techguy1214 so a huge thanks goes out to him!
This is the absolute STOCK M919N Firmware. (THIS IS NOT ROOTED!)
EXPERIMENTAL: This is UNTESTED by me, I compiled this ODIN tar file using the same structure the T-Mobile ODIN File has. I do not have the MetroPCS version of this phone, I have the T-Mobile version. But I figured enough people wanted it so I would try to make it happen.
CONFIRMED WORKING!
I will not be help responsible if you brick your device or flash this incorrectly and your phone ends up blowing up. You have been warned.
Click to expand...
Click to collapse
NOTE: Because this is not officially signed by Samsung, I believe your flash counter will go up, use Triangle Away to reset your counter!
Huge thanks goes out to @danyvw for picking up my slack, new instructions posted.
Link: https://docs.google.com/file/d/0BxJFwkvU-C2McW5zU0RWQ01hM2s/edit?usp=sharing
1. Download the above .zip file and extract the .tar file in the archive and save it somewhere
2. Reboot your phone to download mode.
To get download mode shut down the device. After it shuts off completely simultaneously press the Down volume key+ Home button + press the power button .
3. Start Odin
4. Click on the PDA button and browse to the .tar file that you extracted in step 1 and select it
5. DO NOT PUT .PIT FILE AND DO NOT TICK REPARTITION
6. Connect the USB cable and wait for the ID:COM section to turn blue
7. Click start to flash
8. Do not disconnect the cable or turn off the device once the flash has started, it’s going to take some time to flash, when finish exit Odin and disconnect USB.
9. Let the phone start and Voila!!!!!!

theexel said:
Hey there,
I know some people have been requesting this for quite some time! This couldn't have been possible without @techguy1214 so a huge thanks goes out to him!
This is the absolute STOCK M919N Firmware. (THIS IS NOT ROOTED!)
EXPERIMENTAL: This is UNTESTED by me, I compiled this ODIN tar file using the same structure the T-Mobile ODIN File has. I do not have the MetroPCS version of this phone, I have the T-Mobile version. But I figured enough people wanted it so I would try to make it happen.
AGAIN.. THIS MAY NOT WORK.
If it doesn't use the T-Mobile ODIN, it will work, but of course, you will have the T-Mobile Baseband and whatnot, but if it does not work, I will try to work on it again soon!
NOTE: Because this is not officially signed by Samsung, I believe your flash counter will go up, use Triangle Away to reset your counter!
Download the TAR file: https://copy.com/lyMNNbzjaNYm
Click to expand...
Click to collapse
i tired it it worked 100% thanks

techguy1214 said:
i tired it it worked 100% thanks
Click to expand...
Click to collapse
No, thank you @techguy1214.
Without you, we wouldn't have these files! :highfive:

What is STOCK M919N ?
Can you elaborate more about the different between this M919N & M919V (as an example):
Can we flash without root ?
Compatibility with what ROM or firmware ?
Report log or advantages...etc.?
Anything more...?

itzik_man said:
Can you elaborate more about the different between this M919N & M919V (as an example):
Can we flash without root ?
Compatibility with what ROM or firmware ?
Report log or advantages...etc.?
Anything more...?
Click to expand...
Click to collapse
M919N is the MetroPCS variant of the Galaxy S4.
M919V is the Wind / Mobilicity / Videotron variant of the Galaxy S4, I believe.
This is for people that maybe messed up flashing a ROM or simply want to go back to barebone OFFICIAL MetroPCS stock firmware due to any reason. (Most likely they broke something and want to send it to warranty, lol.)

techguy1214 said:
i tired it it worked 100% thanks
Click to expand...
Click to collapse
any 1 else confirm this....??

djlucklu said:
any 1 else confirm this....??
Click to expand...
Click to collapse
Seems not...

arocker said:
Seems not...
Click to expand...
Click to collapse
Did not work for me. I jumped the gun and flashed a tmo stock rom to see if I could unlock my phone for free. I am unable to flash back to this rom now and can't unlock using a tmo rom.
Can anyone confirm that the pit files are different between the M919 and M919N? I tried a lot of different things last night and I think I flashed the M919 pit file as well as the rom, which is most likely my problem. Odin fails as soon as it tries to write.

Doesn't work
I tried to flash many times with different downloads and always get the same flash error:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NON-HLOS.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)

I get the exact same error.

downloading now ill let you know

fatalfury said:
downloading now ill let you know
Click to expand...
Click to collapse
Any update fatalfury?

people with errors making sure kies is not open right ? also try the USB port on back of computer and test again

krazierokz said:
people with errors making sure kies is not open right ? also try the USB port on back of computer and test again
Click to expand...
Click to collapse
Is not with Kies, its with Odin. Kies does not have firmware support for the SGH-M91N.

Understood just stating that Odin and kies open together conflicts and Odin won't run right that's all I'm saying
sent from my t mobile S4

Fixing Issues an PLEAS!!!
zbennett15 said:
I get the exact same error.
Click to expand...
Click to collapse
For this you are going to need mobile Odin To Flash an you will need to flash twice after you flash it the first time!:laugh::fingers-crossed:

techguy1214 said:
For this you are going to need mobile Odin To Flash an you will need to flash twice after you flash it the first time!:laugh::fingers-crossed:
Click to expand...
Click to collapse
Same error with PC odin, and when trying to open with mobile odin - partition could not be found.
---------- Post added at 07:20 PM ---------- Previous post was at 06:50 PM ----------
techguy1214 said:
i tired it it worked 100% thanks
Click to expand...
Click to collapse
Hey! how you flashed it? Thanks in advance.

I made some changes to techguy file.Is Working flawlessly with Odin, posted on androidforums:
http://androidforums.com/metropcs-g...t/773372-unofficial-m919nuvuamf2-working.html

danyvw said:
I made some changes to techguy file.Is Working flawlessly with Odin, posted on androidforums:
http://androidforums.com/metropcs-g...t/773372-unofficial-m919nuvuamf2-working.html
Click to expand...
Click to collapse
Updated OP, thank you.

Exel said:
Updated OP, thank you.
Click to expand...
Click to collapse
Thank you! Without your file I wouldn't have done anything. :good:

[Instructions] How to Manual Root Note 2 Official stock 4.3 rom

And hit THANKS if i helped you.
Click to expand...
Click to collapse
My device - GT-N7100
ROM- N7100XXUEMK4_N7100ODDEMK1_N7100DDEMJ9_HOME.tar http://forum.xda-developers.com/showthread.php?t=2536423
Official stock 4.3 knox enabled rom
So today i flashed this rom and and when i wanted to root the rom it was very difficult to find a guide to do it, but somehow i managed to root it by taking instructions from few separate threads and i thought of sharing it with others who are facing the same problem.
It was very hard to find how to manually root after flashing 4.3 stock rom and so i wanted to gather what i've learned from few threads and put em into a 1 thread as a guide. Hope this helps
What you will need
1> philz_touch_5.15.0-n7100.tar.md5
http://d-h.st/OIX
2>[GT-N710x][SHV-E250*] CF-Auto-Root
http://download.chainfire.eu/264/CF-Root/CF-Auto-Root/CF-Auto-Root-t03g-t03gxx-gtn7100.zip
3>DrKetan_MultiTool_AdvanceV6.zip
http://d-h.st/MTB
4>Odin 3.4* (this is the version i have & tested)
http://forum.xda-developers.com/showthread.php?t=1703998
5>Samsung device drivers
Step 1
> boot into download mode
start odin3 as administrator and put philz_touch_xxx.md5 into PDA
connect phone in download mode to PC via USB
press start to flash the tar.md5 package
Phone should restart after the process.
Step 2
>Put "DrKetan_MultiTool_AdvanceV6.zip" into external memory and Reboot to Philz recovery
Now flash Multi tool using "instal zip from external sd"
Now go to Aroma file manager>System>App
Now add .bak extension to all knox related apk files Ex-Knox.apk > Knox.apk.bak
NOTE- make sure you don't change anything else you are only supposed to rename knox related apk files
Now exit Aroma and reboot ( don't do anything else)
Step 3
>- Start Odin3-vX.X.exe
- Click the PDA button, and select CF-Auto-Root-....tar.md5
- Put your phone in download mode (turn off phone, then hold VolDown+Home+Power to boot - if it asks you to press a button to continue, press the listed button
- (USB) Connect the phone to your computer
- Make sure Repartition is NOT checked
- Click the Start button
- Wait for Android to boot
after your phone boots it will show "Unfortunately super SU stopped working" Ignore it and go to step 4
Step 4
>Reboot to recovery (Philz), [ If CF auto root has activated your stock recovery do the STEP 1 again to get the Philz recovery ]
Now flash "DrKetan_MultiTool_AdvanceV6.zip" again
And this time go to
Proceed with Multi tool > Skip root inject page (do not change system status) > now in the next page you get to select if you want to remove knox from the system so now Select to remove knox from system and then save and reboot. ( This will disable all the knox related stuff in the system)
after your phone boots it will show "Unfortunately super SU stopped working" Ignore it and go to step 5
Step 5
>So now just go to Play store and update your Super SU and open it and it might ask you weather to instal script in NORMAL mode or CWM
i did CWM and it worked, didn't try normal mode so i suggest you to try CWM as well.
That's it you're permanently rooted and Superuser will act as a system app
Now your Super SU should be working
Now if you want the best battery life and more free ram Please follow my guide on how to do that
CLICK HERE > http://forum.xda-developers.com/showthread.php?t=2682570
Click to expand...
Click to collapse
Try downloading Root checker or titanium backup and see if they work, They should work.
I'm not exactly sure if this would work for everyone but this worked for me so i just shared it with everyone hoping this would help others. And i will not be help responsible for any damage that cause, try it at your own risk .. anyway rooting and everything is risky so if you're up for it only try it.
Credits goes to
- Chainfire for his amazing Auto root files http://forum.xda-developers.com/showthread.php?t=1933542
- Dr.Ketan for his Awesome Multitool http://forum.xda-developers.com/showpost.php?p=45609987&postcount=3&nocache=1&z=3571321067865938
- Phil3759 for his awesome recovery http://forum.xda-developers.com/showthread.php?t=2028103
- vickyvc for his quick guide http://forum.xda-developers.com/showthread.php?t=2540761
- zaki847 for his guide to flash stock rom http://forum.xda-developers.com/showthread.php?t=2536423
NOTE- If you factory reset the phone it will show you that "super user stopped working" o something like that, Just hit ok and open PLAYSTORE and update your superSU again and you have a Running superSU again that's it Your root is permanent Don't ever worry about that
Extra Info for Beginners You can only flash and 4.3 based roms using Philz recovery 5.xx & don't try to flash 4.4 based roms using Philz 5.xx as the flash will fail giving an Error. Use Philz recovery 6.xx to flash android 4.4 based roms
PS- You can only restore nandroid backups using philz 6.xx versions and if you restore nandroid backup using 5.xx version you will be stuck on samsung LOGO.. if u accidentally do this and stuck on samsung logo, don't panic.Press and hold power button and turn off the phone. Then boot into download mode and flash philz 6.xx via ODIN PC and restore your nandroid backup again and your phone will boot up You can flash philz 5 versions over 6 and 6 versions over 5 using odin anytime. no problem there.
Download philz 6.15 from here http://goo.im/devs/philz_touch/CWM_Advanced_Edition/n7100
Click to expand...
Click to collapse
EXTRA (try this if the above method doesn't work for you )
Submitted by hazin99
1st flash cf - autoroot... after rooting process over (after flashing phone restarts and starts rooting process after completion phone restarts again..)
2nd then flash philz touch.... now try it .... phone will load ur custom recovery.. then use Multi tool for deknox....
( remember dont root ur phone with multitool.. u already rooted it with cf autoroot)
Click to expand...
Click to collapse
Important NOTICE- This will not work if you did one or all 3 OTA updates which are specifically 14MB, 62MB and 21MB they come as system stability updates but once you update using them they activate Auto stock recovery system which will lock your recovery to the stock unless you root the device and remove the specific file from system root. So please don't give my post bad ratings or complain that this is not working if you've updated the phone using small OTA updates mentioned above.
To get rid of this problem you can flash the stock rom again and do this method without doing the OTA updates (IT will work)
If you don't have the stock 4.3 rom you can get it from here http://forum.xda-developers.com/showthread.php?t=2536423
Follow the instruction to flash , DO NOT DO OTA UPDATES after u flash it.
Now you can start the rooting procedure mentioned below and 100% guaranteed it works if you do everything as i've adviced
Click to expand...
Click to collapse
INSTRUCTIONS FOR BEST BATTERY LIFE
>> http://forum.xda-developers.com/showthread.php?t=2682570 <<
Click to expand...
Click to collapse
And hit THANKS if i helped you.
Click to expand...
Click to collapse

is knox triggered?

izz.amizan said:
is knox triggered?
Click to expand...
Click to collapse
Yes, It counts when you flash the CWM via Odin PC
but without a custom recovery you can't use super SU as it keeps on force closing due to knox
Anyway once you root your phone your warranty is void right ? so why worry about knox counters

I thought your steps here could avoid the knox trip...
if that so, your step could be shorten to easier method...
1st... flash cf auto root by odin
2nd... update supersu apk
3rd... download root browser from playstore, and by using root browser you can change all knox app apk to apk.bak
easier n simpler...

izz.amizan said:
I thought your steps here could avoid the knox trip...
if that so, your step could be shorten to easier method...
1st... flash cf auto root
2nd... update supersu apk
3rd... download root browser from playstore, and by using root browser you can change all knox app apk to apk.bak
easier n simpler...
Click to expand...
Click to collapse
I know, i tried so many quick methods to root mine this INU 4.3 rom and every time it failed, most of the time my root was gone after rebooting the phone , so i mixed up the info i got from many quick root methods and did it all to make a permanent root.
just posted this here to help anyone who faced the same problem like me

izz.amizan said:
I thought your steps here could avoid the knox trip...
if that so, your step could be shorten to easier method...
1st... flash cf auto root by odin
2nd... update supersu apk
3rd... download root browser from playstore, and by using root browser you can change all knox app apk to apk.bak
easier n simpler...
Click to expand...
Click to collapse
And even if you rename all the KNOX related apk files there are some files that doesn't directly say they are knox but they run in the system and it used to cause my Super SU to crash and that's why i have mentioned an extra step to go to Dr.Katen's toolkit and select to remove all knox related stuff, it really cleans the whole system from knox 200%

no no no... what I mean here, u r using cf auto root... so no need to flash multitools just to get rid the knox apk... I dont see rooting via cf auto root will give any prob... only that, the knox will trip...
2 steps saved here.... no need to flash custom recovery (only flash recovery if decide to flash custom rom) and no need to flash multitools...
no offence, im just giving an option here... a simpler option...
---------- Post added at 10:33 PM ---------- Previous post was at 10:27 PM ----------
Devinda said:
And even if you rename all the KNOX related apk files there are some files that doesn't directly say they are knox but they run in the system and it used to cause my Super SU to crash and that's why i have mentioned an extra step to go to Dr.Katen's toolkit and select to remove all knox related stuff, it really cleans the whole system from knox 200%
Click to expand...
Click to collapse
you know what... after u update superSU, u will be prompted about the knox thing and it's just by clicking "yes" button all knox related stuff will be cleaned... ???

izz.amizan said:
no no no... what I mean here, u r using cf auto root... so no need to flash multitools just to get rid the knox apk... I dont see rooting via cf auto root will give any prob... only that, the knox will trip...
2 steps saved here.... no need to flash custom recovery (only flash recovery if decide to flash custom rom) and no need to flash multitools...
no offence, im just giving an option here... a simpler option...
---------- Post added at 10:33 PM ---------- Previous post was at 10:27 PM ----------
you know what... after u update superSU, u will be prompted about the knox thing and it's just by clicking "yes" button all knox related stuff will be cleaned... ???
Click to expand...
Click to collapse
hahah thanks for that info, case the 1st time i tried Super SU after the update it didn't promote me to to get rid of knox so i didn't know abot that
anyway it's good to know. did you flash a custom rom ?
i wanted to flash a custom rom but the stock 4.3 is very battery friendly and very good in terms of ram management. if you know any rom except ditto v3.2 be sure to share

im on pheonix 16.7 now... before was on jellykatv2 and jellykatv3... also tried z ized 240dpi... it's hard for me to recommend any rom though cos they are all good... in terms of battery, yes I must admit the stock one is damn good battery save... but custom rom have extra note3 features... arrrghhhhhh im so confused which and which... battery or note3 features...

izz.amizan said:
im on pheonix 16.7 now... before was on jellykatv2 and jellykatv3... also tried z ized 240dpi... it's hard for me to recommend any rom though cos they are all good... in terms of battery, yes I must admit the stock one is damn good battery save... but custom rom have extra note3 features... arrrghhhhhh im so confused which and which... battery or note3 features...
Click to expand...
Click to collapse
Yeah.. battery in stock rom is pretty sweet I get more thsn 17 hours daily
But looking for a custom rom to use with less bloat wear
I've tried ditto 3.2 but it used too much ram
I need a light rom
Sent from my GT-N7100 using XDA Premium 4 mobile app

I got this to work finally using your instructions at the top of this thread - the 'easy' way didn't work of just applying the root zip (CF-Auto-Root-t03g-t03gxx-gtn7100.zip) to my stock 4.3 GT-N7100 Note 2 - I kept getting the FC's on superSU and the Knox security reports.
I then followed your steps and got a lot further, Knox seemed to be removed fine. I still couldn't get the SuperSU app to update correctly, so i booted the Note 2 into the phils recovery file manager and used it to replace the existing superuser.apk file located in /system/apps/ with the one mentioned & linked to in the comments in this thread - then restarted.
This allowed me to go to the play store, and perform an 'update' on the app (prior the only option the Play store was giving me on the SuperSU app was 'open', not update) , which then worked - great
Now rooted, no knox, new bootloader and seems faster too! 1 day in and all is well.

Glad to hear that
Great that u wrote the way you did it.
It would help someone
Sent from my GT-N7100 using XDA Premium 4 mobile app

I prefer omega custom ROM. That is based from stock ROM, with more less bloatware as well. :good:

(not in reroot into recovery mode)
Devinda said:
My device - GT-N7100
ROM- N7100XXUEMK4_N7100ODDEMK1_N7100DDEMJ9_HOME.tar http://forum.xda-developers.com/showthread.php?t=2536423
Official stock 4.3 knox enabled rom
So today i flashed this rom and and when i wanted to root the rom it was very difficult to find a guide to do it, but somehow i managed to root it by taking instructions from few separate threads and i thought of sharing it with others who are facing the same problem.
It was very hard to find how to manually root after flashing 4.3 stock rom and so i wanted to gather what i've learned from few threads and put em into a 1 thread as a guide. Hope this helps
What you will need
1> philz_touch_5.15.0-n7100.tar.md5
http://d-h.st/OIX
2>[GT-N710x][SHV-E250*] CF-Auto-Root
http://download.chainfire.eu/264/CF-Root/CF-Auto-Root/CF-Auto-Root-t03g-t03gxx-gtn7100.zip
3>DrKetan_MultiTool_AdvanceV6.zip
http://d-h.st/MTB
4>Odin 3.4* (this is the version i have & tested)
http://forum.xda-developers.com/showthread.php?t=1703998
5>Samsung device drivers
Step 1
> boot into download mode
start odin3 as administrator and put philz_touch_xxx.md5 into PDA
connect phone in download mode to PC via USB
press start to flash the tar.md5 package
Phone should restart after the process.
Step 2
>Put "DrKetan_MultiTool_AdvanceV6.zip" into external memory and Reboot to Philz recovery
Now flash Multi tool using "instal zip from external sd"
Now go to Aroma file manager>System>App
Now add .bak extension to all knox related apk files Ex-Knox.apk > Knox.apk.bak
NOTE- make sure you don't change anything else you are only supposed to rename knox related apk files
Now exit Aroma and reboot ( don't do anything else)
Step 3
>- Start Odin3-vX.X.exe
- Click the PDA button, and select CF-Auto-Root-....tar.md5
- Put your phone in download mode (turn off phone, then hold VolDown+Home+Power to boot - if it asks you to press a button to continue, press the listed button
- (USB) Connect the phone to your computer
- Make sure Repartition is NOT checked
- Click the Start button
- Wait for Android to boot
after your phone boots it will show "Unfortunately super SU stopped working" Ignore it and go to step 4
Step 4
>Reboot to recovery (Philz), [ If CF auto root has activated your stock recovery do the STEP 1 again to get the Philz recovery ]
Now flash "DrKetan_MultiTool_AdvanceV6.zip" again
And this time go to
Proceed with Multi tool > Skip root inject page (do not change system status) > now in the next page you get to select if you want to remove knox from the system so now Select to remove knox from system and then save and reboot. ( This will disable all the knox related stuff in the system)
after your phone boots it will show "Unfortunately super SU stopped working" Ignore it and go to step 5
Step 5
>So now just go to Play store and update your Super SU and open it and it might ask you weather to instal script in NORMAL mode or CWM
i did CWM and it worked, didn't try normal mode so i suggest you to try CWM as well.
That's it you're permanently rooted and Superuser will act as a system app
Now your Super SU should be working
Try downloading Root checker or titanium backup and see if they work, They should work.
I'm not exactly sure if this would work for everyone but this worked for me so i just shared it with everyone hoping this would help others. And i will not be help responsible for any damage that cause, try it at your own risk .. anyway rooting and everything is risky so if you're up for it only try it.
Credits goes to
- Chainfire for his amazing Auto root files http://forum.xda-developers.com/showthread.php?t=1933542
- Dr.Ketan for his Awesome Multitool http://forum.xda-developers.com/showpost.php?p=45609987&postcount=3&nocache=1&z=3571321067865938
- Phil3759 for his awesome recovery http://forum.xda-developers.com/showthread.php?t=2028103
- vickyvc for his quick guide http://forum.xda-developers.com/showthread.php?t=2540761
And thank me too if i helped you.
Click to expand...
Click to collapse
doesn't work in N7105
i download philz_touch_4.93.6-n7105.tar.md5 is doesn't work (NOT IN REROOT INTO RECOVERY MODE)

ivan19061 said:
doesn't work in N7105
i download philz_touch_4.93.6-n7105.tar.md5 is doesn't work (NOT IN REROOT INTO RECOVERY MODE)
Click to expand...
Click to collapse
This is for GT-N7100
All links are for GT-N7100 and I recomand philz 5.15 ..which is in the link as it is the most stable version
It doesn't support kit kat roms. If u want to flash kit kat roms u need philz 6.18
I have never tried 4.9 u mentioned
Sent from my GT-N7100 using XDA Premium 4 mobile app

[linkin] said:
I prefer omega custom ROM. That is based from stock ROM, with more less bloatware as well. :good:
Click to expand...
Click to collapse
I haven't tried any custom roms on this 4.3 rom yet but Phoenix rom comes highly recomanded. DITTO rom is also good but it comes with too much bloat which consumes about 1.1 gb ram just for the system.
Try Pheonix rom. If u like
Sent from my GT-N7100 using XDA Premium 4 mobile app

ivan19061 said:
doesn't work in N7105
i download philz_touch_4.93.6-n7105.tar.md5 is doesn't work (NOT IN REROOT INTO RECOVERY MODE)
Click to expand...
Click to collapse
Wait.. did yountey flashing the philz tar.md5 using the stock recovery? If YES.. no u can't flash it in recovery
Open pc odin and click pda thennselect your philzxxxxx.md5 file
Put your phone into download mode
Turn off the phone. Then press power+volume down+menu at once
Then connect phone to pc and after odin recognize ur phone click start in odin and u shoukd have a running philz custom recovery
Sent from my GT-N7100 using XDA Premium 4 mobile app

Devinda said:
Wait.. did yountey flashing the philz tar.md5 using the stock recovery? If YES.. no u can't flash it in recovery
Open pc odin and click pda thennselect your philzxxxxx.md5 file
Put your phone into download mode
Turn off the phone. Then press power+volume down+menu at once
Then connect phone to pc and after odin recognize ur phone click start in odin and u shoukd have a running philz custom recovery
Sent from my GT-N7100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
i am not kit kat version
Andoird Version
4.3
Baseband Version
N7015ZHEML1
Kernel Version
3.0.31.2379898
[email protected] #1
Thu Jan 2 12:27:07 KST 2014
Build Number
JSS15J.N7105ZHUENA1
SE for Android Status
Enforcing
SEPF_GTN7105_4.3_0016
i did in odin 3.0.7
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/004> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
I press power bottom>restart> i can't see the recovery mode......

ivan19061 said:
i am not kit kat version
Andoird Version
4.3
Build Number
JSS15J.N7105ZHUENA1
SE for Android Status
Enforcing
SEPF_GTN7105_4.3_0016
i did in odin 3.0.7
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/004> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
I press power bottom>restart> i can't see the recovery mode......
Click to expand...
Click to collapse
Press
POWER+VOLUME UP+HOME
at once, as soon as you see the samsung logo relese the buttons and wait till the recovery starts
it takes some time for the recovery to load
don't forget to hit thanks if i helped you

ivan19061 said:
doesn't work in N7105
i download philz_touch_4.93.6-n7105.tar.md5 is doesn't work (NOT IN REROOT INTO RECOVERY MODE)
Click to expand...
Click to collapse
U need a small change in this steps....
Some stock roms didnt allow custom recoveries (may be the hell knox is behind this) .. its just starts its stock recovery (dont know where it comes from) instead of custom recoveries....
1st flash cf - autoroot... after rooting process over (after flashing phone restarts and starts rooting process after completion phone restarts again..)
2nd then flash philz touch.... now try it .... phone will load ur custom recovery.. then use Multi tool for deknox....
( remember dont root ur phone with multitool.. u already rooted it with cf autoroot)
Sent from my GT-N7100 using XDA Premium 4 mobile app

M919UVUSFQA1 OTA Update Available 2/7/2017

M919UVUSFQA1 OTA Update (Official OTA) links here
https://alfafile.net/file/vbGh
http://rapidgator.net/file/cc090b9fd3b077b9041ff1b6df3bf889
I saw a "Stock Firmware" collection thread, but I wasn't sure if I was supposed to add to that person's collection or not. If this isn't supposed to be here, please let me know.
Thanks

Great, I been trying to download it right away. I hope that this will be the best baseband

filter4ever said:
M919UVUSFQA1 OTA Update (Official OTA) links here
https://alfafile.net/file/vbGh
http://rapidgator.net/file/cc090b9fd3b077b9041ff1b6df3bf889
I saw a "Stock Firmware" collection thread, but I wasn't sure if I was supposed to add to that person's collection or not. If this isn't supposed to be here, please let me know.
Thanks
Click to expand...
Click to collapse
What Android version

It's 4.4.4
Sent from my SGH-M919 using XDA Premium HD app

other link for download please

luisblessing said:
other link for download please
Click to expand...
Click to collapse
You will find it here https://forum.xda-developers.com/showthread.php?t=2267895&page=20
All thanks and credits go to @KaosMaster

does someone install this?
Can someone get from it the modem pls?
Thanks

Grievous74 said:
does someone install this?
Can someone get from it the modem pls?
Thanks
Click to expand...
Click to collapse
I have the 4 files extracted but I'm not so sure which one is the modem or if its safe to flash

hearkenoath said:
I have the 4 files extracted but I'm not so sure which one is the modem or if its safe to flash
Click to expand...
Click to collapse
Thanks.
I end up installing the full version, then re-root my phone again, install TWRP, the restore back my daily driver (Albe95 Lollirom)
...andnow my Baseband is : M919UVSFQA1
I believe the modem is in "CP_M919UVSFQA1_CL6281449_QB12131755_REV06_user_low_ship_MULTI_CERT.tar.md5"
Thanks anyway

Grievous74 said:
Thanks.
I end up installing the full version, then re-root my phone again, install TWRP, the restore back my daily driver (Albe95 Lollirom)
...andnow my Baseband is : M919UVSFQA1
I believe the modem is in "CP_MO19UVSFQA1_CL6281449_QB12131755_REV06_user_low_ship_MULTI_CERT.tar.md5"
Thanks anyway
Click to expand...
Click to collapse
Thanks, you think that I could flash it with Odin over CM 11?

hearkenoath said:
Thanks, you think that I could flash it with Odin over CM 11?
Click to expand...
Click to collapse
I don't know man.
I know that flushing the full one worked.
You can try

can anyone please tell me how to root M919UVSFQA1 , I have looked on xda and cant seem to find anything useful please help me My phone is galaxy s4 android 4.4.4 Baseband version M919UVSFQ1 Model No.sgh-m919

ashhad101 said:
can anyone please tell me how to root M919UVSFQA1 , I have looked on xda and cant seem to find anything useful please help me My phone is galaxy s4 android 4.4.4 Baseband version M919UVSFQ1 Model No.sgh-m919
Click to expand...
Click to collapse
CF-Autoroot. Altough I suspect something isn't right with that method. Also you can try K I N G O

hearkenoath said:
CF-Autoroot. Altough I suspect something isn't right with that method. Also you can try K I N G O
Click to expand...
Click to collapse
I successfully rooted my device using skipnet toolkit, you can found it on xda if anybody wants it anyways thank you

ashhad101 said:
I successfully rooted my device using skipnet toolkit, you can found it on xda if anybody wants it anyways thank you
Click to expand...
Click to collapse
Skipnet or Skiproot?

hearkenoath said:
Skipnet or Skiproot?
Click to expand...
Click to collapse
ohh! sorry actually its skipsoft toolkit you can check it here
https://forum.xda-developers.com/showthread.php?t=2678634

ashhad101 said:
ohh! sorry actually its skipsoft toolkit you can check it here
https://forum.xda-developers.com/showthread.php?t=2678634
Click to expand...
Click to collapse
Thanks, I'm gonna try that

hearkenoath said:
I have the 4 files extracted but I'm not so sure which one is the modem or if its safe to flash
Click to expand...
Click to collapse
The file TMB-M919UVSFQA1-20170208161412.zip contains M919UVSFQA1_M919TMBFQA1_M919UVSFQA1_HOME.tar.md5
On Linux, the process is ...
# extract the modems from the tar
$ tar xvf M919UVSFQA1_M919TMBFQA1_M919UVSFQA1_HOME.tar.md5 NON-HLOS.bin modem.bin
# Put the phone into 'download mode' (power on with the volume down button pressed)
# use heimdall to flash the modems
$ heimdall detect
Device detected
$ heimdall flash --APNHLOS NON-HLOS.bin --MDM modem.bin
If you are upgrading from a **very early** modem you may also have to upgrade the boot loader (if you loose audio after updating the modem, then go back and do this step too)
$ tar xvf M919UVSFQA1_M919TMBFQA1_M919UVSFQA1_HOME.tar.md5 NON-HLOS.bin modem.bin aboot.mbn rpm.mbn sbl2.mbn sbl3.mbn tz.mbn
$ heimdall flash --SBL2 sbl2.mbn --SBL3 sbl3.mbn --RPM rpm.mbn --TZ tz.mbn --MDM modem.bin --APNHLOS NON-HLOS.bin --ABOOT aboot.mbn
(n.b. I upgraded the boot loader some time ago, so I did not do this again for this update ... use at your own risk)

---------- Post added at 09:35 AM ---------- Previous post was at 09:34 AM ----------
vk2bea said:
The file TMB-M919UVSFQA1-20170208161412.zip contains M919UVSFQA1_M919TMBFQA1_M919UVSFQA1_HOME.tar.md5
On Linux, the process is ...
# extract the modems from the tar
$ tar xvf M919UVSFQA1_M919TMBFQA1_M919UVSFQA1_HOME.tar.md5 NON-HLOS.bin modem.bin
# Put the phone into 'download mode' (power on with the volume down button pressed)
# use heimdall to flash the modems
$ heimdall detect
Device detected
$ heimdall flash --APNHLOS NON-HLOS.bin --MDM modem.bin
If you are upgrading from a **very early** modem you may also have to upgrade the boot loader (if you loose audio after updating the modem, then go back and do this step too)
$ tar xvf M919UVSFQA1_M919TMBFQA1_M919UVSFQA1_HOME.tar.md5 NON-HLOS.bin modem.bin aboot.mbn rpm.mbn sbl2.mbn sbl3.mbn tz.mbn
$ heimdall flash --SBL2 sbl2.mbn --SBL3 sbl3.mbn --RPM rpm.mbn --TZ tz.mbn --MDM modem.bin --APNHLOS NON-HLOS.bin --ABOOT aboot.mbn
(n.b. I upgraded the boot loader some time ago, so I did not do this again for this update ... use at your own risk)
Click to expand...
Click to collapse
Thanks

I can't get the damn thing to download. I'm on a 5 mbps download speed and I keep losing it. If someone could upload it to MEGA or make a torrent file, that'd be really awesome.