[Q] Downgrade radio with slcd possible? - Droid Incredible Q&A, Help & Troubleshooting

Hi guys. I'm trying to downgrade the radio in my HTC incredible from 2.15 to a stock 1.00 but any of the guides I've found are just for the incredibles with the older amoled screen, not the newer slcd screen which I have. Every time I downgrade with a regular radio I lose all functionality of my screen and it goes black and unresponsive. I end up having to put a recovery image on my SD card and flashing back to normal blindly.
Can someone PLEASE help me to flash a stock 1.00 radio on this phone and keep my screen running???
Thanks

That radio revision has to match the ROM version you are running. 1.00 radio has not been used since back in the 2.1 days... If you want to return to stock follow to "unroot" threads and once you flash over the original rom that should have changed everything to match again like you had just bought the phone.

1.x radio isn't stock.
Dinc's going out the door today are running at least 2.15.x.7.28 .
That IS the stock radio, this is Froyo, not anything earlier.
Sent from my ADR6300 using XDA Premium App

God just killed a kitten.

I'm trying to repair the MEID on the phone. I bought it off ebay and the MEID is all screwed up. I am following a guide that will allow me to re-write the MEID back to the phone but it says i need to downgrade my radio to 1.00.03.04.06.
The guide is located at http://cdmagurus.com/forum/showthread.php/4530-Easiest-way-to-repair-meid-on-the-Incredible
and http://cdmagurus.com/forum/showthread.php/4456-Easiest-way-to-repair-meid-on-the-Evo

The slcd never got drivers for 2.1. I doubt the guide will work
Sent from my LiquidLight using XDA App

Related

[Q] Flashing radios, kernels, firmware after unrevoked forever

I've been reading through the forums since the release of unrevoked forever... Flashed it, I'm s-off and running. I was going to hold off until OTA released, but got bored today and decided to mess around with all of this now.
So today I flashed the 2.15 radio that was leaked to the board. After that, I installed SkyRaider 2.5.2 from Clockwork in recovery, which I believe also flashed a new kernel.
My question is... since unrevoked forever and s-off, I can flash between pretty much anything without issue, right?
I found a stock 1.00.03.04.06 radio flash file on here as well. So I restored back to stock 2.1, and then put the 1.00 stock radio on the root of SD card, booted into HBOOT and it flashed back the stock radio.
Is there any issues with doing this? I got excited to be back on Froyo (did this weeks ago with another version of SkyRaider, the leaked OTA, etc... But then went completely back to stock with RUU, re-rooted, etc)... I just want to make sure that doing this isn't going to cause any issues. I would assume at this point, with s-off, it doesn't matter... But, don't want to mess up the phone.
Also - Can someone on stock 2.1 who is also waiting for OTA confirm my versions?
Firmware - 2.1-update1
Baseband - 1.00.03.04.06
Kernel - 2.6.29-cc1c2268, [email protected] #1
Software - 1.22.605.2
I know from the unrevoked wiki they say that running different hboots, radios and kernels might result in an unstable phone.
Thanks.
If I'm reading this correctly it sounds like you bravely accomplished something that everyone has been speculating and wondering about since Forever was released: Downgrading a radio by simply flashing it.
Correct me if I'm wrong but I think most were afraid to try it for fear of bricking.
Sent from my Incredible using XDA App
Yes I would like to know also, are you saying that while being 2.2 with 2.15 radio you loaded the 1.x radio img and just flashed it in Hboot? Or did you go through the RUU downgrading method?
Haha... I didn't realize I was being brave. I thought I was just following what everyone else did.
My process was.... On 2.1 update 1 with 1.00 radio... I then flashed the 2.15 radio using HBOOT. It started fine, checked and saw 2.1 update 1 with the 2.15 radio. Booted into Clockwork and did an install of SkyRaider 2.5.2. That was running just fine... But I decided that I wanted to go back "stock" and would wait for 2.2 OTA.
So with that, I found the radio and recovery from on http://adrynalyne.us/. That zip contains just the radio image and recovery (radio 1.00). So with that, I did a restore in Clockwork back to my backup of stock 2.1... Shut down after it restored, booted into HBOOT with that zip of 1.00 radio from the adrynalyne website and it restored back to 1.00 radio.
I did not RUU or anything else. My understanding of s-off was that we could flash pieces one at a time without running into issues... That included radio, kernels, etc.
Everything seems to be running just fine from yesterday through today.
SimonTuffGuy said:
Haha... I didn't realize I was being brave. I thought I was just following what everyone else did.
My process was.... On 2.1 update 1 with 1.00 radio... I then flashed the 2.15 radio using HBOOT. It started fine, checked and saw 2.1 update 1 with the 2.15 radio. Booted into Clockwork and did an install of SkyRaider 2.5.2. That was running just fine... But I decided that I wanted to go back "stock" and would wait for 2.2 OTA.
So with that, I found the radio and recovery from on http://adrynalyne.us/. That zip contains just the radio image and recovery (radio 1.00). So with that, I did a restore in Clockwork back to my backup of stock 2.1... Shut down after it restored, booted into HBOOT with that zip of 1.00 radio from the adrynalyne website and it restored back to 1.00 radio.
I did not RUU or anything else. My understanding of s-off was that we could flash pieces one at a time without running into issues... That included radio, kernels, etc.
Everything seems to be running just fine from yesterday through today.
Click to expand...
Click to collapse
So maybe you just made history because I've been trying like hell to get out of someone whether that was possible? From that point you could I guess flash the ota to take you to 2.0 if you wanted? I am not interested in going back to 1.x but maybe 2.0
The following post seems to say the same thing (http://forum.xda-developers.com/showpost.php?p=7692494&postcount=190)
trombone dixie said:
here's what i did:
my brother has a DInc as well so he let me use his phone to mount my microSD card. I removed the 2.15 radio and put on the stock one 1.00.03.04.06 back on the root of my microSD. put my microSD back in my phone booted holding down volume and power. installed the downgraded version and phone is working again.
Click to expand...
Click to collapse
I can't confirm re-installing the leaked OTA that upgrades you to 2.0 radio... But I don't see why it wouldn't work.
I seem to remember a post that warned about constantly flashing radios when s-off first came out though.
I have a new post on the 2.15 radio thread in the development forum for more clarification about going from 2.15 to 1.00, etc.

[Q] Is it possible to downgrade from 3.30 back to stock 3.26?

I have a somewhat unique situation that I haven't been able to peace together after 6 days of searching threads. Any insight would be greatly appreciated!!
My elderly mother bought an EVO recently after I bought one and some idiot talked her into running the 3.30 RUU on an EVO with software 3.26.651.6, baseband 2.15.00.07.28, and hardware ver 3. This also upgraded her HBOOT to ver 2.02. From my thread searching, it seems that 3.30 isn't intended for EVO's with HW ver 3 and may impact the phone's performance and/or battery life. I do believe that there was an OTA for her phone for 3.29.651.5.
I am wondering if it is possible to downgrade her HBOOT and sw back to 3.26.651.6 and the corresponding HBOOT version? I would then want to apply the OTA to update to 3.29.651.5, where she should be. She NEEDS to have a stock phone . From searching threads it appears that I need to root her phone using the 'like a boss" method and then run the RUU 3.26.651.6. However, I am unable to find the stock 3.26 recovery img needed. I do have the stock 3.30 recovery img but am reluctant to use a different recovery img.
Help please, if you can!
A little direction if you can...
Anyone? Just looking for a little direction here. Also, trying to follow the rules and keep this out of the dev section...
Not a noob to rooting, just to the EVO. Rooted my old hero and flashed a few diff roms...just want to make sure I have the right info and am prepared before I start rooting the phone. I really have searched MANY threads and I feel confident about rooting the phone via "Like a boss" and illogos's updates but I didn't find anything about successfully un-rooting to a pre 3.30 software version.
Can I just run the RUU for 3.26xxx after rooting? I'm assuming that will be fine with S-Off and an older hboot.

[Q] Broken Screen, reverting back to stock rom + recovery

Hello everyone!
I am going to attempt to revert my Desire Z back to stock because I would like to send it in for repairs due to a broken screen. My phone is BELL branded Desire Z, and I got it only a couple months after it came out, stock version is probably around 1.34 I think..? I would provide details but the screen doesn't work and I'm not aware of any command line tools to retrieve that data. (Screen is solid black)
My issue is this:
I am currently running Cyanogen mod 6.1 with Clockwork recovery. I have S-OFF, and CID is whatever it was when I got it. (rooted with rage + gfree and didn't change the CID)
I know I have to install the Bell stock firmware, that being bell's ROM with sense UI, radio and recovery, but I'm not sure what order to do it in, or if I can just use the RUU (older version, the one that came with my phone so that I can obtain root in the future)
I seem to have the impression the RUU checks a version number of some kind and if flashing an older version number, it will not flash. (I could be wrong, that's what I need you for) It is also my understanding that the RUU flashes EVERYTHING, radio, recovery, hboot, etc. Can I use the old(er) RUU to flash my phone back to factory with out doing anything first? Again I've got CM mod 6.1 on there with the clockwork recovery, S-OFF, and regular hboot and CID.
Also, my screen is broken and I cannot see anything on the display, however, last time I checked I could still use the touch screen, although blindly, so if you have anything to help me, command line style is preferred.
Also, I'm not new to linux, I've been using it on my laptop for about 2 years, and I'm in school for programming (beginner still), so lay on the technical stuff, more than anything I'd like to learn...
Thanks for your help!

Evo Unable to downgrade Radio Baseband

Spring Evo 4g
HBOOT: 2.10.0001
Model: PC36100
Hardware:0003
Android:2.2
Kernel 2.6.32.17
Baseband:2.15.00.11.19
Software3.70.651.1
PRI:1.90_003
Rooted with Unrevoked.
After upgrade Baseband, I got very bad signal and want to roll it back.
1. Tried to use cm recovery 2.6 to install zip file containing radio image to 2.05.00.06.10, not sucessful. However, every time it turn to 2.15.00.11.19 after reboot. I fell 6 vibrations during flash, do not know why.
2. Tried to use fastboot flash radio image,but I got "remote not allowed" message!
Could any body help out?
Thanks.
请高手们指点一下吧!谢谢谢谢!
2.10.0001 radio is non-downgradeable on new hardware models.
Your phone has the new block size that is not compatible with the old radios and the remote not allowed error is because you are not using the eng hboot. Unfortunately it is not compatible as is either.
You can force it to downgrade and I believe I found a way to make it work with the new block sizes, but it's never been tested.
Ill test it. Got an extra new block size
snandlal said:
Ill test it. Got an extra new block size
Click to expand...
Click to collapse
If it doesn't work though you're pretty much guaranteed to be bricked. But if it's a phone you're not worried about I've been dying to find out if this will actually work.
Yes i will sacrafice. Gettin a nexus s 4g anyways...seriously will test tho
snandlal said:
Yes i will sacrafice. Gettin a nexus s 4g anyways...seriously will test tho
Click to expand...
Click to collapse
Right on, all you need to do is downgrade to the eng hboot from the hboot and before rebooting or doing anything set 'fastboot -n 4096'
That *should* let you use the eng hboot. You still won't be unable to downgrade your radio though, although afterward it may let you flash the old radios without so much as a warning.
Ok will do. Hboot usb or fastboot usb?
Tryed this but i still get six short vibrates when flashing the radio
snandlal said:
Tryed this but i still get six short vibrates when flashing the radio
Click to expand...
Click to collapse
fastboot USB, as I previously said you will probably never be able to downgrade the radio. Sorry but that's just how it is.
Are you able to at least use your phone with the .76 hboot?
its weird.. there should be a way!!
wolfort said:
Spring Evo 4g
HBOOT: 2.10.0001
Model: PC36100
Hardware:0003
Android:2.2
Kernel 2.6.32.17
Baseband:2.15.00.11.19
Software3.70.651.1
PRI:1.90_003
Rooted with Unrevoked.
After upgrade Baseband, I got very bad signal and want to roll it back.
1. Tried to use cm recovery 2.6 to install zip file containing radio image to 2.05.00.06.10, not sucessful. However, every time it turn to 2.15.00.11.19 after reboot. I fell 6 vibrations during flash, do not know why.
2. Tried to use fastboot flash radio image,but I got "remote not allowed" message!
Could any body help out?
Thanks.
请高手们指点一下吧!谢谢谢谢!
Click to expand...
Click to collapse
Instead of downgrading so far back, have you tried downgrading the baseband from 2.15.00.11.19 to 2.15.00.09.01? If not, give it a try. You can download it and all of the other EVO radios from the link below:
http://forum.xda-developers.com/showthread.php?t=715485
UPDATE: Disregard. The original post was dated April 8th.
posting & replying via the XDA Premium app.
If i wanted to go back and try Android 2.1 roms, do i have to downgrade the radios as well?
Trying not to make a new thread but....say if I am using a 2.2 Rom with the 2.15.00.11.09 radio and I want to flash to a 2.1 rom(I'm talking bout far back as the rooted shipped stock ROM from last June. Would I need to downgrade my radio? And does that stock ROM already come prepackaged with a kernel. I'm pretty sure the kernel needs to be downgraded for it to be compatible. When I got my EVO in Sept, I was already on 2.2. Never tried 2.1 but have always been curious to try it and see how much worse it is. Then I could say I've finally tried all three versions of Android on my phone and how far we have progressed
As you've stated, the problem would not necessarily be the rom itself not working with the new radios, but whether or not the default kernel would work properly. Give it a shot. The worst that *should* happen is bootlooping. At that point, you can either reboot into recovery and flash a different kernel or downgrade the radio, PRI and NV. Of course, this is my opinion. You can download the rom from here . By the way, according to the descriptions on the shipped roms, the radios appear to be included.
posting & replying via the XDA Premium app.
just read that i can't downgrade my radio because i'm running the 2.10 HBOOT and on HW003. but if downgrading the radio is not necessarily important to run a rooted 2.1 rom then i don't have much to worry about do i? also, those links you posted: i can flash those RUU's in recovery like i would any other rom? i don't want to go back to stock and be unrooted.
i was thinking of running the 1.32.651.1 rooted rom from Flipzmode, and if need to - download the appropirate kernel link next to it on the detailed ROM wiki thread maintained by Toast.
You cannot downgrade your HBOOT from 2.10 (not necessarily accurate) without a risk of problems, however, you can downgrade the baseband, PRI and NV. I've done it several times. I've downgrade from baseband 11.19 to 09.01. As well as upgrade to 04.08. I've also downgraded my PRI from 1.90 to 1.77 all while having HBOOT 2.10.
posting & replying via the XDA Premium app.
i've downgraded my PRI because of the wakelock issues.
so you can downgrade the baseband to a certain extent? only within the 2.15 radios? but you cant downgrade to the radios that were on Eclair? if i can run 2.1 roms on 2.15 radios then by all means i'm going to try it out. thanks for the info doug

[Q] Issues with Unrooting and Updating Kernel, Radio, OS, EtC

I was rooted with Unrevoked forever and running Caulkulins EVio 2.
Ran the unrevoked s-on tool from the How to Unroot the EVO in 2 STEPS thread.
Attempted to run the PC36IMG but it won't load as I get a notification stating that it is older than the 2.2 the phone came with.
I do now have S-On
Did full wipe and factory restore.
I am unable to update radio, Wimax or Kernel.
Downloaded the 2.3 update and it loads about 1/3 of the way and then hangs, giving me a triangle with a yellow exclamation point next to the little green android guy.
I'm thinking that perhaps I am not totally non rooted but I'm not convinced this shouldn't allow me to update from the 2.15.00.09.01 or allow me to replace the 2.6.32.15-ge2fb08e htc--kernel and 18-12#11
Build# is 3.29.651.5CL252548 Release Keys and Software Number 3.29.651.5
Any thoughts or help you could give me?
I guess I must be a problem with no answers?
For one, you don't need to unroot to flash radios.....
This I was aware of but as I am due for an upgrade in three weeks and I was trading the phone in at RS, it made sense to do so.
This still doesn't explain why I can't upgrade, why the radio flash doesn't take, etc
jfenton57 said:
This I was aware of but as I am due for an upgrade in three weeks and I was trading the phone in at RS, it made sense to do so.
This still doesn't explain why I can't upgrade, why the radio flash doesn't take, etc
Click to expand...
Click to collapse
Since you are rootless, flash the 3.70.XX RUU and then run update. That should get all updated ...
Although why bother with a trade in?
Sent from my PC36100 using XDA Premium App
Thanks for the RUU recommendation. I tracked down the original non rooted version and it solved all my problems

Categories

Resources